arduino-esp32/cores/esp32/HardwareSerial.cpp
Tomasz Ścisłowicz 5af139bb74 HardwareSerial - add changeBaudRate method (#2223)
* Add updateBaudRate to hardware serial

* remove flush

* Fix tab
2018-12-23 21:15:06 +02:00

158 lines
3.1 KiB
C++

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include "pins_arduino.h"
#include "HardwareSerial.h"
#ifndef RX1
#define RX1 9
#endif
#ifndef TX1
#define TX1 10
#endif
#ifndef RX2
#define RX2 16
#endif
#ifndef TX2
#define TX2 17
#endif
#if !defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_SERIAL)
HardwareSerial Serial(0);
HardwareSerial Serial1(1);
HardwareSerial Serial2(2);
#endif
HardwareSerial::HardwareSerial(int uart_nr) : _uart_nr(uart_nr), _uart(NULL) {}
void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert, unsigned long timeout_ms)
{
if(0 > _uart_nr || _uart_nr > 2) {
log_e("Serial number is invalid, please use 0, 1 or 2");
return;
}
if(_uart) {
end();
}
if(_uart_nr == 0 && rxPin < 0 && txPin < 0) {
rxPin = 3;
txPin = 1;
}
if(_uart_nr == 1 && rxPin < 0 && txPin < 0) {
rxPin = RX1;
txPin = TX1;
}
if(_uart_nr == 2 && rxPin < 0 && txPin < 0) {
rxPin = RX2;
txPin = TX2;
}
_uart = uartBegin(_uart_nr, baud ? baud : 9600, config, rxPin, txPin, 256, invert);
if(!baud) {
time_t startMillis = millis();
unsigned long detectedBaudRate = 0;
while(millis() - startMillis < timeout_ms && !(detectedBaudRate = uartDetectBaudrate(_uart))) {
yield();
}
end();
if(detectedBaudRate) {
delay(100); // Give some time...
_uart = uartBegin(_uart_nr, detectedBaudRate, config, rxPin, txPin, 256, invert);
} else {
log_e("Could not detect baudrate. Serial data at the port must be present within the timeout for detection to be possible");
_uart = NULL;
}
}
}
void HardwareSerial::updateBaudRate(unsigned long baud)
{
uartSetBaudRate(_uart, baud);
}
void HardwareSerial::end()
{
if(uartGetDebug() == _uart_nr) {
uartSetDebug(0);
}
uartEnd(_uart);
_uart = 0;
}
size_t HardwareSerial::setRxBufferSize(size_t new_size) {
return uartResizeRxBuffer(_uart, new_size);
}
void HardwareSerial::setDebugOutput(bool en)
{
if(_uart == 0) {
return;
}
if(en) {
uartSetDebug(_uart);
} else {
if(uartGetDebug() == _uart_nr) {
uartSetDebug(0);
}
}
}
int HardwareSerial::available(void)
{
return uartAvailable(_uart);
}
int HardwareSerial::availableForWrite(void)
{
return uartAvailableForWrite(_uart);
}
int HardwareSerial::peek(void)
{
if (available()) {
return uartPeek(_uart);
}
return -1;
}
int HardwareSerial::read(void)
{
if(available()) {
return uartRead(_uart);
}
return -1;
}
void HardwareSerial::flush()
{
uartFlush(_uart);
}
size_t HardwareSerial::write(uint8_t c)
{
uartWrite(_uart, c);
return 1;
}
size_t HardwareSerial::write(const uint8_t *buffer, size_t size)
{
uartWriteBuf(_uart, buffer, size);
return size;
}
uint32_t HardwareSerial::baudRate()
{
return uartGetBaudRate(_uart);
}
HardwareSerial::operator bool() const
{
return true;
}