arduino-esp32/libraries/USB/examples/Mouse/ButtonMouseControl/ButtonMouseControl.ino
Me No Dev c45cff5f83
Implement USB HID Device Support for ESP32-S2 (#5538)
* Add support and example for USB HID Devices
* Add support and example for USB Vendor
2021-08-23 17:27:34 +03:00

87 lines
2.3 KiB
C++

/*
ButtonMouseControl
Controls the mouse from five pushbuttons on an Arduino Leonardo, Micro or Due.
Hardware:
- five pushbuttons attached to D12, D13, D14, D15, D0
The mouse movement is always relative. This sketch reads four pushbuttons,
and uses them to set the movement of the mouse.
WARNING: When you use the Mouse.move() command, the Arduino takes over your
mouse! Make sure you have control before you use the mouse commands.
created 15 Mar 2012
modified 27 Mar 2012
by Tom Igoe
This example code is in the public domain.
http://www.arduino.cc/en/Tutorial/ButtonMouseControl
*/
#include "USB.h"
#include "USBHIDMouse.h"
USBHIDMouse Mouse;
// set pin numbers for the five buttons:
const int upButton = 12;
const int downButton = 13;
const int leftButton = 14;
const int rightButton = 15;
const int mouseButton = 0;
int range = 5; // output range of X or Y movement; affects movement speed
int responseDelay = 10; // response delay of the mouse, in ms
void setup() {
// initialize the buttons' inputs:
pinMode(upButton, INPUT_PULLUP);
pinMode(downButton, INPUT_PULLUP);
pinMode(leftButton, INPUT_PULLUP);
pinMode(rightButton, INPUT_PULLUP);
pinMode(mouseButton, INPUT_PULLUP);
// initialize mouse control:
Mouse.begin();
USB.begin();
}
void loop() {
// read the buttons:
int upState = digitalRead(upButton);
int downState = digitalRead(downButton);
int rightState = digitalRead(rightButton);
int leftState = digitalRead(leftButton);
int clickState = digitalRead(mouseButton);
// calculate the movement distance based on the button states:
int xDistance = (leftState - rightState) * range;
int yDistance = (upState - downState) * range;
// if X or Y is non-zero, move:
if ((xDistance != 0) || (yDistance != 0)) {
Mouse.move(xDistance, yDistance, 0);
}
// if the mouse button is pressed:
if (clickState == LOW) {
// if the mouse is not pressed, press it:
if (!Mouse.isPressed(MOUSE_LEFT)) {
Mouse.press(MOUSE_LEFT);
}
}
// else the mouse button is not pressed:
else {
// if the mouse is pressed, release it:
if (Mouse.isPressed(MOUSE_LEFT)) {
Mouse.release(MOUSE_LEFT);
}
}
// a delay so the mouse doesn't move too fast:
delay(responseDelay);
}