arduino-esp32/tools/sdk/include/esp_https_ota/esp_https_ota.h
Me No Dev 1977370e6f
IDF release/v3.3 (#3339)
* IDF release/v3.3 46b12a560

* fix build

* IDF release/v3.3 367c3c09c
2020-01-20 22:07:04 +02:00

169 lines
7.0 KiB
C

// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <esp_http_client.h>
#include <esp_ota_ops.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef void *esp_https_ota_handle_t;
/**
* @brief ESP HTTPS OTA configuration
*/
typedef struct {
const esp_http_client_config_t *http_config; /*!< ESP HTTP client configuration */
} esp_https_ota_config_t;
#define ESP_ERR_HTTPS_OTA_BASE (0x9000)
#define ESP_ERR_HTTPS_OTA_IN_PROGRESS (ESP_ERR_HTTPS_OTA_BASE + 1) /* OTA operation in progress */
/**
* @brief HTTPS OTA Firmware upgrade.
*
* This function allocates HTTPS OTA Firmware upgrade context, establishes HTTPS connection,
* reads image data from HTTP stream and writes it to OTA partition and
* finishes HTTPS OTA Firmware upgrade operation.
* This API supports URL redirection, but if CA cert of URLs differ then it
* should be appended to `cert_pem` member of `config`.
*
* @param[in] config pointer to esp_http_client_config_t structure.
*
* @note This API handles the entire OTA operation, so if this API is being used
* then no other APIs from `esp_https_ota` component should be called.
* If more information and control is needed during the HTTPS OTA process,
* then one can use `esp_https_ota_begin` and subsequent APIs. If this API returns
* successfully, esp_restart() must be called to boot from the new firmware image.
*
* @return
* - ESP_OK: OTA data updated, next reboot will use specified partition.
* - ESP_FAIL: For generic failure.
* - ESP_ERR_INVALID_ARG: Invalid argument
* - ESP_ERR_OTA_VALIDATE_FAILED: Invalid app image
* - ESP_ERR_NO_MEM: Cannot allocate memory for OTA operation.
* - ESP_ERR_FLASH_OP_TIMEOUT or ESP_ERR_FLASH_OP_FAIL: Flash write failed.
* - For other return codes, refer OTA documentation in esp-idf's app_update component.
*/
esp_err_t esp_https_ota(const esp_http_client_config_t *config);
/**
* @brief Start HTTPS OTA Firmware upgrade
*
* This function initializes ESP HTTPS OTA context and establishes HTTPS connection.
* This function must be invoked first. If this function returns successfully, then `esp_https_ota_perform` should be
* called to continue with the OTA process and there should be a call to `esp_https_ota_finish` on
* completion of OTA operation or on failure in subsequent operations.
* This API supports URL redirection, but if CA cert of URLs differ then it
* should be appended to `cert_pem` member of `http_config`, which is a part of `ota_config`.
* In case of error, this API explicitly sets `handle` to NULL.
*
* @param[in] ota_config pointer to esp_https_ota_config_t structure
* @param[out] handle pointer to an allocated data of type `esp_https_ota_handle_t`
* which will be initialised in this function
*
* @note This API is blocking, so setting `is_async` member of `http_config` structure will
* result in an error.
*
* @return
* - ESP_OK: HTTPS OTA Firmware upgrade context initialised and HTTPS connection established
* - ESP_FAIL: For generic failure.
* - ESP_ERR_INVALID_ARG: Invalid argument (missing/incorrect config, certificate, etc.)
* - For other return codes, refer documentation in app_update component and esp_http_client
* component in esp-idf.
*/
esp_err_t esp_https_ota_begin(esp_https_ota_config_t *ota_config, esp_https_ota_handle_t *handle);
/**
* @brief Read image data from HTTP stream and write it to OTA partition
*
* This function reads image data from HTTP stream and writes it to OTA partition. This function
* must be called only if esp_https_ota_begin() returns successfully.
* This function must be called in a loop since it returns after every HTTP read operation thus
* giving you the flexibility to stop OTA operation midway.
*
* @param[in] https_ota_handle pointer to esp_https_ota_handle_t structure
*
* @return
* - ESP_ERR_HTTPS_OTA_IN_PROGRESS: OTA update is in progress, call this API again to continue.
* - ESP_OK: OTA update was successful
* - ESP_FAIL: OTA update failed
* - ESP_ERR_INVALID_ARG: Invalid argument
* - ESP_ERR_OTA_VALIDATE_FAILED: Invalid app image
* - ESP_ERR_NO_MEM: Cannot allocate memory for OTA operation.
* - ESP_ERR_FLASH_OP_TIMEOUT or ESP_ERR_FLASH_OP_FAIL: Flash write failed.
* - For other return codes, refer OTA documentation in esp-idf's app_update component.
*/
esp_err_t esp_https_ota_perform(esp_https_ota_handle_t https_ota_handle);
/**
* @brief Clean-up HTTPS OTA Firmware upgrade and close HTTPS connection
*
* This function closes the HTTP connection and frees the ESP HTTPS OTA context.
* This function switches the boot partition to the OTA partition containing the
* new firmware image.
*
* @note If this API returns successfully, esp_restart() must be called to
* boot from the new firmware image
*
* @param[in] https_ota_handle pointer to esp_https_ota_handle_t structure
*
* @return
* - ESP_OK: Clean-up successful
* - ESP_ERR_INVALID_STATE
* - ESP_ERR_INVALID_ARG: Invalid argument
* - ESP_ERR_OTA_VALIDATE_FAILED: Invalid app image
*/
esp_err_t esp_https_ota_finish(esp_https_ota_handle_t https_ota_handle);
/**
* @brief Reads app description from image header. The app description provides information
* like the "Firmware version" of the image.
*
* @note This API can be called only after esp_https_ota_begin() and before esp_https_ota_perform().
* Calling this API is not mandatory.
*
* @param[in] https_ota_handle pointer to esp_https_ota_handle_t structure
* @param[out] new_app_info pointer to an allocated esp_app_desc_t structure
*
* @return
* - ESP_ERR_INVALID_ARG: Invalid arguments
* - ESP_FAIL: Failed to read image descriptor
* - ESP_OK: Successfully read image descriptor
*/
esp_err_t esp_https_ota_get_img_desc(esp_https_ota_handle_t https_ota_handle, esp_app_desc_t *new_app_info);
/*
* @brief This function returns OTA image data read so far.
*
* @note This API should be called only if `esp_https_ota_perform()` has been called atleast once or
* if `esp_https_ota_get_img_desc` has been called before.
*
* @param[in] https_ota_handle pointer to esp_https_ota_handle_t structure
*
* @return
* - -1 On failure
* - total bytes read so far
*/
int esp_https_ota_get_image_len_read(esp_https_ota_handle_t https_ota_handle);
#ifdef __cplusplus
}
#endif