arduino-esp32/cores/esp32/esp32-hal-i2c.h
me-no-dev c19fc061b0 Hopefully fix I2C/Wire
Tested with (all at the same time):
- MPU9250
- HTU21
- TMP102
- BMP180
- AM2320
- SSD1306
2016-12-14 02:41:22 +02:00

59 lines
1.7 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _ESP32_HAL_I2C_H_
#define _ESP32_HAL_I2C_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
typedef enum {
I2C_ERROR_OK,
I2C_ERROR_DEV,
I2C_ERROR_ACK,
I2C_ERROR_TIMEOUT,
I2C_ERROR_BUS
} i2c_err_t;
struct i2c_struct_t;
typedef struct i2c_struct_t i2c_t;
i2c_t * i2cInit(uint8_t i2c_num, uint16_t slave_addr, bool addr_10bit_en);
//call this after you setup the bus and pins to send empty packet
//required because when pins are attached, they emit pulses that lock the bus
void i2cInitFix(i2c_t * i2c);
i2c_err_t i2cSetFrequency(i2c_t * i2c, uint32_t clk_speed);
uint32_t i2cGetFrequency(i2c_t * i2c);
i2c_err_t i2cAttachSCL(i2c_t * i2c, int8_t scl);
i2c_err_t i2cDetachSCL(i2c_t * i2c, int8_t scl);
i2c_err_t i2cAttachSDA(i2c_t * i2c, int8_t sda);
i2c_err_t i2cDetachSDA(i2c_t * i2c, int8_t sda);
i2c_err_t i2cWrite(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uint8_t len, bool sendStop);
i2c_err_t i2cRead(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uint8_t len, bool sendStop);
#ifdef __cplusplus
}
#endif
#endif /* _ESP32_HAL_I2C_H_ */