arduino-esp32/tools/sdk/include/esp_adc_cal/esp_adc_cal.h
2017-09-12 09:40:52 +03:00

154 lines
6.2 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_ADC_CAL_H__
#define __ESP_ADC_CAL_H__
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include "driver/adc.h"
/** @cond */
#define ADC_CAL_GAIN_SCALE 16
#define ADC_CAL_OFFSET_SCALE 10
#define ADC_CAL_IDEAL_V_REF 1100 //In mV
#define ADC_CAL_LOW_V_REF 1000
#define ADC_CAL_HIGH_V_REF 1200
#define ADC_CAL_MIN 0
#define ADC_CAL_MAX 4095
/** @endcond */
/**
* @brief Structure storing Lookup Table
*
* The Lookup Tables (LUT) of a given attenuation contains 33 equally spaced
* points. The Gain and Offset curves are used to find the appopriate gain and
* offset factor given a reference voltage v_ref.
*
* @note A seperate LUT is provided for each attenuation and are defined in
* esp_adc_cal_lookup_tables.c
*/
typedef struct {
uint32_t gain_m; /**<Gradient of Gain Curve */
uint32_t gain_c; /**<Offset of Gain Curve */
uint32_t offset_m; /**<Gradient of Offset Curve */
uint32_t offset_c; /**<Offset of Offset Curve */
uint32_t bit_shift; /**<Bit shift used find corresponding LUT points
given an ADC reading*/
uint32_t voltage[]; /**<Array of voltages in mV representing the
ADC-Voltage curve */
} esp_adc_cal_lookup_table_t;
/**
* @brief Structure storing ADC characteristics of given v_ref
*
* The ADC Characteristics structure stores the gain and offset factors of an
* ESP32 module's ADC. These factors are calculated using the reference voltage,
* and the Gain and Offset curves provided in the lookup tables.
*
* @note Call esp_adc_cal_get_characteristics() to initialize the structure
*
*/
typedef struct {
uint32_t v_ref; /**<Reference Voltage of current ESP32 Module in mV*/
uint32_t gain; /**<Scaling factor used to correct LUT voltages to
current v_ref. Bit shifted by << ADC_CAL_GAIN_SCALE
for uint32 arithmetic */
uint32_t offset; /**<Offset in mV used to correct LUT Voltages to current v_ref */
uint32_t ideal_offset; /**<Offset in mV at the ideal reference voltage */
adc_bits_width_t bit_width; /**<Bit width of ADC e.g. ADC_WIDTH_12Bit */
const esp_adc_cal_lookup_table_t *table; /**<Pointer to LUT */
} esp_adc_cal_characteristics_t;
extern const esp_adc_cal_lookup_table_t esp_adc_cal_table_atten_0; /**<LUT for atten0 */
extern const esp_adc_cal_lookup_table_t esp_adc_cal_table_atten_1; /**<LUT for atten1 */
extern const esp_adc_cal_lookup_table_t esp_adc_cal_table_atten_2; /**<LUT for atten2 */
extern const esp_adc_cal_lookup_table_t esp_adc_cal_table_atten_3; /**<LUT for atten3 */
/**
* @brief Calculate characteristics of ADC
*
* This function will calculate the gain and offset factors based on the
* reference voltage parameter and the Gain and Offset curve provided in the LUT.
*
* @note reference voltage of the ADCs can be routed to GPIO using
* adc2_vref_to_gpio() from the ADC driver
*
* @note The LUT members have been bit shifted by ADC_CAL_GAIN_SCALE or
* ADC_CAL_OFFSET_SCALE to make them uint32_t compatible. This bit shifting will
* accounted for in this function
*
* @param[in] v_ref true reference voltage of the ADC in mV (1000 to 1200mV). Nominal
* value for reference voltage is 1100mV.
* @param[in] atten attenuation setting used to select the corresponding lookup table
* @param[in] bit_width bit width of ADC
* @param[out] chars pointer to structure used to store ADC characteristics of module
*/
void esp_adc_cal_get_characteristics(uint32_t v_ref,
adc_atten_t atten,
adc_bits_width_t bit_width,
esp_adc_cal_characteristics_t *chars);
/**
* @brief Convert raw ADC reading to voltage in mV
*
* This function converts a raw ADC reading to a voltage in mV. This conversion
* is based on the ADC's characteristics. The raw ADC reading is referenced
* against the LUT (pointed to inside characteristics struct) to obtain a voltage.
* Gain and offset factors are then applied to the voltage in order to obtain
* the final result.
*
* @param[in] adc ADC reading (different bit widths will be handled)
* @param[in] chars pointer to structure containing ADC characteristics of
* the module. Structure also contains pointer to the
* corresponding LUT
*
* @return Calculated voltage in mV
*
* @note characteristics structure must be initialized using
* esp_adc_cal_get_characteristics() before this function is used
*/
uint32_t esp_adc_cal_raw_to_voltage(uint32_t adc,
const esp_adc_cal_characteristics_t *chars);
/**
* @brief Reads ADC1 and returns voltage in mV
*
* This function reads the ADC1 using adc1_get_raw() to obtain a raw ADC
* reading. The reading is then converted into a voltage value using
* esp_adc_cal_raw_to_voltage().
*
* @param[in] channel Channel of ADC1 to measure
* @param[in] chars Pointer to ADC characteristics struct
*
* @return voltage Calculated voltage in mV
*
* @note ADC must be initialized using adc1_config_width() and
* adc1_config_channel_atten() before this function is used
*
* @note characteristics structure must be initialized using
* esp_adc_cal_get_characteristics() before this function is used
*/
uint32_t adc1_to_voltage(adc1_channel_t channel, const esp_adc_cal_characteristics_t *chars);
#ifdef __cplusplus
}
#endif
#endif /* __ESP_ADC_CAL_H__ */