153 lines
5.0 KiB
C
Executable File
153 lines
5.0 KiB
C
Executable File
/*******************************************************************************
|
|
|
|
Copyright (c) 2006-2007 Tensilica Inc.
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining
|
|
a copy of this software and associated documentation files (the
|
|
"Software"), to deal in the Software without restriction, including
|
|
without limitation the rights to use, copy, modify, merge, publish,
|
|
distribute, sublicense, and/or sell copies of the Software, and to
|
|
permit persons to whom the Software is furnished to do so, subject to
|
|
the following conditions:
|
|
|
|
The above copyright notice and this permission notice shall be included
|
|
in all copies or substantial portions of the Software.
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
|
|
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
|
|
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
uart-16550.h Generic definitions for National Semiconductor 16550 UART
|
|
|
|
This is used by board-support-packages with one or more 16550 compatible UARTs.
|
|
A BSP provides a base address for each instance of a 16550 UART on the board.
|
|
|
|
Note that a 16552 DUART (Dual UART) is simply two instances of a 16550 UART.
|
|
|
|
*******************************************************************************/
|
|
|
|
#ifndef _UART_16550_H_
|
|
#define _UART_16550_H_
|
|
|
|
/* C interface to UART registers. */
|
|
struct uart_dev_s {
|
|
union {
|
|
uart16550_reg_t rxb; /* DLAB=0: receive buffer, read-only */
|
|
uart16550_reg_t txb; /* DLAB=0: transmit buffer, write-only */
|
|
uart16550_reg_t dll; /* DLAB=1: divisor, LS byte latch */
|
|
} w0;
|
|
union {
|
|
uart16550_reg_t ier; /* DLAB=0: interrupt-enable register */
|
|
uart16550_reg_t dlm; /* DLAB=1: divisor, MS byte latch */
|
|
} w1;
|
|
|
|
union {
|
|
uart16550_reg_t isr; /* DLAB=0: interrupt status register, read-only */
|
|
uart16550_reg_t fcr; /* DLAB=0: FIFO control register, write-only */
|
|
uart16550_reg_t afr; /* DLAB=1: alternate function register */
|
|
} w2;
|
|
|
|
uart16550_reg_t lcr; /* line control-register, write-only */
|
|
uart16550_reg_t mcr; /* modem control-regsiter, write-only */
|
|
uart16550_reg_t lsr; /* line status register, read-only */
|
|
uart16550_reg_t msr; /* modem status register, read-only */
|
|
uart16550_reg_t scr; /* scratch regsiter, read/write */
|
|
};
|
|
|
|
|
|
#define _RXB(u) ((u)->w0.rxb)
|
|
#define _TXB(u) ((u)->w0.txb)
|
|
#define _DLL(u) ((u)->w0.dll)
|
|
#define _IER(u) ((u)->w1.ier)
|
|
#define _DLM(u) ((u)->w1.dlm)
|
|
#define _ISR(u) ((u)->w2.isr)
|
|
#define _FCR(u) ((u)->w2.fcr)
|
|
#define _AFR(u) ((u)->w2.afr)
|
|
#define _LCR(u) ((u)->lcr)
|
|
#define _MCR(u) ((u)->mcr)
|
|
#define _LSR(u) ((u)->lsr)
|
|
#define _MSR(u) ((u)->msr)
|
|
#define _SCR(u) ((u)->scr)
|
|
|
|
typedef volatile struct uart_dev_s uart_dev_t;
|
|
|
|
/* IER bits */
|
|
#define RCVR_DATA_REG_INTENABLE 0x01
|
|
#define XMIT_HOLD_REG_INTENABLE 0x02
|
|
#define RCVR_STATUS_INTENABLE 0x04
|
|
#define MODEM_STATUS_INTENABLE 0x08
|
|
|
|
/* FCR bits */
|
|
#define _FIFO_ENABLE 0x01
|
|
#define RCVR_FIFO_RESET 0x02
|
|
#define XMIT_FIFO_RESET 0x04
|
|
#define DMA_MODE_SELECT 0x08
|
|
#define RCVR_TRIGGER_LSB 0x40
|
|
#define RCVR_TRIGGER_MSB 0x80
|
|
|
|
/* AFR bits */
|
|
#define AFR_CONC_WRITE 0x01
|
|
#define AFR_BAUDOUT_SEL 0x02
|
|
#define AFR_RXRDY_SEL 0x04
|
|
|
|
/* ISR bits */
|
|
#define INT_STATUS(r) ((r)&1)
|
|
#define INT_PRIORITY(r) (((r)>>1)&0x7)
|
|
|
|
/* LCR bits */
|
|
#define WORD_LENGTH(n) (((n)-5)&0x3)
|
|
#define STOP_BIT_ENABLE 0x04
|
|
#define PARITY_ENABLE 0x08
|
|
#define EVEN_PARITY 0x10
|
|
#define FORCE_PARITY 0x20
|
|
#define XMIT_BREAK 0x40
|
|
#define DLAB_ENABLE 0x80
|
|
|
|
/* MCR bits */
|
|
#define _DTR 0x01
|
|
#define _RTS 0x02
|
|
#define _OP1 0x04
|
|
#define _OP2 0x08
|
|
#define LOOP_BACK 0x10
|
|
|
|
/* LSR Bits */
|
|
#define RCVR_DATA_READY 0x01
|
|
#define OVERRUN_ERROR 0x02
|
|
#define PARITY_ERROR 0x04
|
|
#define FRAMING_ERROR 0x08
|
|
#define BREAK_INTERRUPT 0x10
|
|
#define XMIT_HOLD_EMPTY 0x20
|
|
#define XMIT_EMPTY 0x40
|
|
#define FIFO_ERROR 0x80
|
|
#define RCVR_READY(u) (_LSR(u)&RCVR_DATA_READY)
|
|
#define XMIT_READY(u) (_LSR(u)&XMIT_HOLD_EMPTY)
|
|
|
|
/* MSR bits */
|
|
#define _RDR 0x01
|
|
#define DELTA_DSR 0x02
|
|
#define DELTA_RI 0x04
|
|
#define DELTA_CD 0x08
|
|
#define _CTS 0x10
|
|
#define _DSR 0x20
|
|
#define _RI 0x40
|
|
#define _CD 0x80
|
|
|
|
|
|
/* Compute 16-bit divisor for baudrate generator, with rounding: */
|
|
#define UART_DIVISOR(clock,baud) (((clock)/16 + (baud)/2)/(baud))
|
|
|
|
/* Prototypes of driver functions */
|
|
extern void uart16550_init( uart_dev_t *u, unsigned baud, unsigned ndata,
|
|
unsigned parity, unsigned nstop );
|
|
extern void uart16550_out( uart_dev_t *u, char c );
|
|
extern char uart16550_in( uart_dev_t *u );
|
|
extern unsigned uart16550_measure_sys_clk( uart_dev_t *u );
|
|
|
|
#endif /* _UART_16550_H_ */
|