a59eafbc9d
* fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
409 lines
15 KiB
C
409 lines
15 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#ifndef _DRIVER_ADC_H_
|
|
#define _DRIVER_ADC_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "esp_err.h"
|
|
#include "driver/gpio.h"
|
|
#include "soc/adc_channel.h"
|
|
|
|
typedef enum {
|
|
ADC_ATTEN_DB_0 = 0, /*!<The input voltage of ADC will be reduced to about 1/1 */
|
|
ADC_ATTEN_DB_2_5 = 1, /*!<The input voltage of ADC will be reduced to about 1/1.34 */
|
|
ADC_ATTEN_DB_6 = 2, /*!<The input voltage of ADC will be reduced to about 1/2 */
|
|
ADC_ATTEN_DB_11 = 3, /*!<The input voltage of ADC will be reduced to about 1/3.6*/
|
|
ADC_ATTEN_MAX,
|
|
} adc_atten_t;
|
|
|
|
typedef enum {
|
|
ADC_WIDTH_BIT_9 = 0, /*!< ADC capture width is 9Bit*/
|
|
ADC_WIDTH_BIT_10 = 1, /*!< ADC capture width is 10Bit*/
|
|
ADC_WIDTH_BIT_11 = 2, /*!< ADC capture width is 11Bit*/
|
|
ADC_WIDTH_BIT_12 = 3, /*!< ADC capture width is 12Bit*/
|
|
ADC_WIDTH_MAX,
|
|
} adc_bits_width_t;
|
|
|
|
//this definitions are only for being back-compatible
|
|
#define ADC_ATTEN_0db ADC_ATTEN_DB_0
|
|
#define ADC_ATTEN_2_5db ADC_ATTEN_DB_2_5
|
|
#define ADC_ATTEN_6db ADC_ATTEN_DB_6
|
|
#define ADC_ATTEN_11db ADC_ATTEN_DB_11
|
|
//this definitions are only for being back-compatible
|
|
#define ADC_WIDTH_9Bit ADC_WIDTH_BIT_9
|
|
#define ADC_WIDTH_10Bit ADC_WIDTH_BIT_10
|
|
#define ADC_WIDTH_11Bit ADC_WIDTH_BIT_11
|
|
#define ADC_WIDTH_12Bit ADC_WIDTH_BIT_12
|
|
|
|
typedef enum {
|
|
ADC1_CHANNEL_0 = 0, /*!< ADC1 channel 0 is GPIO36 */
|
|
ADC1_CHANNEL_1, /*!< ADC1 channel 1 is GPIO37 */
|
|
ADC1_CHANNEL_2, /*!< ADC1 channel 2 is GPIO38 */
|
|
ADC1_CHANNEL_3, /*!< ADC1 channel 3 is GPIO39 */
|
|
ADC1_CHANNEL_4, /*!< ADC1 channel 4 is GPIO32 */
|
|
ADC1_CHANNEL_5, /*!< ADC1 channel 5 is GPIO33 */
|
|
ADC1_CHANNEL_6, /*!< ADC1 channel 6 is GPIO34 */
|
|
ADC1_CHANNEL_7, /*!< ADC1 channel 7 is GPIO35 */
|
|
ADC1_CHANNEL_MAX,
|
|
} adc1_channel_t;
|
|
|
|
typedef enum {
|
|
ADC2_CHANNEL_0 = 0, /*!< ADC2 channel 0 is GPIO4 */
|
|
ADC2_CHANNEL_1, /*!< ADC2 channel 1 is GPIO0 */
|
|
ADC2_CHANNEL_2, /*!< ADC2 channel 2 is GPIO2 */
|
|
ADC2_CHANNEL_3, /*!< ADC2 channel 3 is GPIO15 */
|
|
ADC2_CHANNEL_4, /*!< ADC2 channel 4 is GPIO13 */
|
|
ADC2_CHANNEL_5, /*!< ADC2 channel 5 is GPIO12 */
|
|
ADC2_CHANNEL_6, /*!< ADC2 channel 6 is GPIO14 */
|
|
ADC2_CHANNEL_7, /*!< ADC2 channel 7 is GPIO27 */
|
|
ADC2_CHANNEL_8, /*!< ADC2 channel 8 is GPIO25 */
|
|
ADC2_CHANNEL_9, /*!< ADC2 channel 9 is GPIO26 */
|
|
ADC2_CHANNEL_MAX,
|
|
} adc2_channel_t;
|
|
|
|
typedef enum {
|
|
ADC_CHANNEL_0 = 0, /*!< ADC channel */
|
|
ADC_CHANNEL_1, /*!< ADC channel */
|
|
ADC_CHANNEL_2, /*!< ADC channel */
|
|
ADC_CHANNEL_3, /*!< ADC channel */
|
|
ADC_CHANNEL_4, /*!< ADC channel */
|
|
ADC_CHANNEL_5, /*!< ADC channel */
|
|
ADC_CHANNEL_6, /*!< ADC channel */
|
|
ADC_CHANNEL_7, /*!< ADC channel */
|
|
ADC_CHANNEL_8, /*!< ADC channel */
|
|
ADC_CHANNEL_9, /*!< ADC channel */
|
|
ADC_CHANNEL_MAX,
|
|
} adc_channel_t;
|
|
|
|
typedef enum {
|
|
ADC_UNIT_1 = 1, /*!< SAR ADC 1*/
|
|
ADC_UNIT_2 = 2, /*!< SAR ADC 2, not supported yet*/
|
|
ADC_UNIT_BOTH = 3, /*!< SAR ADC 1 and 2, not supported yet */
|
|
ADC_UNIT_ALTER = 7, /*!< SAR ADC 1 and 2 alternative mode, not supported yet */
|
|
ADC_UNIT_MAX,
|
|
} adc_unit_t;
|
|
|
|
typedef enum {
|
|
ADC_ENCODE_12BIT, /*!< ADC to I2S data format, [15:12]-channel [11:0]-12 bits ADC data */
|
|
ADC_ENCODE_11BIT, /*!< ADC to I2S data format, [15]-1 [14:11]-channel [10:0]-11 bits ADC data */
|
|
ADC_ENCODE_MAX,
|
|
} adc_i2s_encode_t;
|
|
|
|
typedef enum {
|
|
ADC_I2S_DATA_SRC_IO_SIG = 0, /*!< I2S data from GPIO matrix signal */
|
|
ADC_I2S_DATA_SRC_ADC = 1, /*!< I2S data from ADC */
|
|
ADC_I2S_DATA_SRC_MAX,
|
|
} adc_i2s_source_t;
|
|
|
|
/**
|
|
* @brief Get the gpio number of a specific ADC1 channel.
|
|
*
|
|
* @param channel Channel to get the gpio number
|
|
*
|
|
* @param gpio_num output buffer to hold the gpio number
|
|
*
|
|
* @return
|
|
* - ESP_OK if success
|
|
* - ESP_ERR_INVALID_ARG if channal not valid
|
|
*/
|
|
esp_err_t adc1_pad_get_io_num(adc1_channel_t channel, gpio_num_t *gpio_num);
|
|
|
|
/**
|
|
* @brief Configure ADC1 capture width, meanwhile enable output invert for ADC1.
|
|
* The configuration is for all channels of ADC1
|
|
* @param width_bit Bit capture width for ADC1
|
|
*
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t adc1_config_width(adc_bits_width_t width_bit);
|
|
|
|
/**
|
|
* @brief Configure ADC capture width.
|
|
* @param adc_unit ADC unit index
|
|
* @param width_bit Bit capture width for ADC unit.
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t adc_set_data_width(adc_unit_t adc_unit, adc_bits_width_t width_bit);
|
|
|
|
/**
|
|
* @brief Set the attenuation of a particular channel on ADC1, and configure its
|
|
* associated GPIO pin mux.
|
|
*
|
|
* @note For any given channel, this function must be called before the first time
|
|
* adc1_get_raw() is called for that channel.
|
|
*
|
|
* @note This function can be called multiple times to configure multiple
|
|
* ADC channels simultaneously. adc1_get_raw() can then be called for any configured
|
|
* channel.
|
|
*
|
|
* The default ADC full-scale voltage is 1.1V. To read higher voltages (up to the pin maximum voltage,
|
|
* usually 3.3V) requires setting >0dB signal attenuation for that ADC channel.
|
|
*
|
|
* When VDD_A is 3.3V:
|
|
*
|
|
* - 0dB attenuaton (ADC_ATTEN_DB_0) gives full-scale voltage 1.1V
|
|
* - 2.5dB attenuation (ADC_ATTEN_DB_2_5) gives full-scale voltage 1.5V
|
|
* - 6dB attenuation (ADC_ATTEN_DB_6) gives full-scale voltage 2.2V
|
|
* - 11dB attenuation (ADC_ATTEN_DB_11) gives full-scale voltage 3.9V (see note below)
|
|
*
|
|
* @note The full-scale voltage is the voltage corresponding to a maximum reading (depending on ADC1 configured
|
|
* bit width, this value is: 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.)
|
|
*
|
|
* @note At 11dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
|
|
*
|
|
* Due to ADC characteristics, most accurate results are obtained within the following approximate voltage ranges:
|
|
*
|
|
* - 0dB attenuaton (ADC_ATTEN_DB_0) between 100 and 950mV
|
|
* - 2.5dB attenuation (ADC_ATTEN_DB_2_5) between 100 and 1250mV
|
|
* - 6dB attenuation (ADC_ATTEN_DB_6) between 150 to 1750mV
|
|
* - 11dB attenuation (ADC_ATTEN_DB_11) between 150 to 2450mV
|
|
*
|
|
* For maximum accuracy, use the ADC calibration APIs and measure voltages within these recommended ranges.
|
|
*
|
|
* @param channel ADC1 channel to configure
|
|
* @param atten Attenuation level
|
|
*
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t adc1_config_channel_atten(adc1_channel_t channel, adc_atten_t atten);
|
|
|
|
/**
|
|
* @brief Take an ADC1 reading from a single channel.
|
|
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
|
|
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
|
|
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
|
|
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
|
|
*
|
|
* @note Call adc1_config_width() before the first time this
|
|
* function is called.
|
|
*
|
|
* @note For any given channel, adc1_config_channel_atten(channel)
|
|
* must be called before the first time this function is called. Configuring
|
|
* a new channel does not prevent a previously configured channel from being read.
|
|
*
|
|
* @param channel ADC1 channel to read
|
|
*
|
|
* @return
|
|
* - -1: Parameter error
|
|
* - Other: ADC1 channel reading.
|
|
*/
|
|
int adc1_get_raw(adc1_channel_t channel);
|
|
|
|
/** @cond */ //Doxygen command to hide deprecated function from API Reference
|
|
/*
|
|
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
|
|
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
|
|
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
|
|
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
|
|
*
|
|
* @deprecated This function returns an ADC1 reading but is deprecated due to
|
|
* a misleading name and has been changed to directly call the new function.
|
|
* Use the new function adc1_get_raw() instead
|
|
*/
|
|
int adc1_get_voltage(adc1_channel_t channel) __attribute__((deprecated));
|
|
/** @endcond */
|
|
|
|
/**
|
|
* @brief Enable ADC power
|
|
*/
|
|
void adc_power_on();
|
|
|
|
/**
|
|
* @brief Power off SAR ADC
|
|
* This function will force power down for ADC
|
|
*/
|
|
void adc_power_off();
|
|
|
|
/**
|
|
* @brief Initialize ADC pad
|
|
* @param adc_unit ADC unit index
|
|
* @param channel ADC channel index
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t adc_gpio_init(adc_unit_t adc_unit, adc_channel_t channel);
|
|
|
|
/**
|
|
* @brief Set ADC data invert
|
|
* @param adc_unit ADC unit index
|
|
* @param inv_en whether enable data invert
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t adc_set_data_inv(adc_unit_t adc_unit, bool inv_en);
|
|
|
|
/**
|
|
* @brief Set ADC source clock
|
|
* @param clk_div ADC clock divider, ADC clock is divided from APB clock
|
|
* @return
|
|
* - ESP_OK success
|
|
*/
|
|
esp_err_t adc_set_clk_div(uint8_t clk_div);
|
|
|
|
/**
|
|
* @brief Set I2S data source
|
|
* @param src I2S DMA data source, I2S DMA can get data from digital signals or from ADC.
|
|
* @return
|
|
* - ESP_OK success
|
|
*/
|
|
esp_err_t adc_set_i2s_data_source(adc_i2s_source_t src);
|
|
|
|
/**
|
|
* @brief Initialize I2S ADC mode
|
|
* @param adc_unit ADC unit index
|
|
* @param channel ADC channel index
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t adc_i2s_mode_init(adc_unit_t adc_unit, adc_channel_t channel);
|
|
|
|
/**
|
|
* @brief Configure ADC1 to be usable by the ULP
|
|
*
|
|
* This function reconfigures ADC1 to be controlled by the ULP.
|
|
* Effect of this function can be reverted using adc1_get_raw function.
|
|
*
|
|
* Note that adc1_config_channel_atten, adc1_config_width functions need
|
|
* to be called to configure ADC1 channels, before ADC1 is used by the ULP.
|
|
*/
|
|
void adc1_ulp_enable();
|
|
|
|
/**
|
|
* @brief Read Hall Sensor
|
|
*
|
|
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
|
|
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
|
|
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
|
|
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
|
|
*
|
|
* @note The Hall Sensor uses channels 0 and 3 of ADC1. Do not configure
|
|
* these channels for use as ADC channels.
|
|
*
|
|
* @note The ADC1 module must be enabled by calling
|
|
* adc1_config_width() before calling hall_sensor_read(). ADC1
|
|
* should be configured for 12 bit readings, as the hall sensor
|
|
* readings are low values and do not cover the full range of the
|
|
* ADC.
|
|
*
|
|
* @return The hall sensor reading.
|
|
*/
|
|
int hall_sensor_read();
|
|
|
|
/**
|
|
* @brief Get the gpio number of a specific ADC2 channel.
|
|
*
|
|
* @param channel Channel to get the gpio number
|
|
*
|
|
* @param gpio_num output buffer to hold the gpio number
|
|
*
|
|
* @return
|
|
* - ESP_OK if success
|
|
* - ESP_ERR_INVALID_ARG if channal not valid
|
|
*/
|
|
esp_err_t adc2_pad_get_io_num(adc2_channel_t channel, gpio_num_t *gpio_num);
|
|
|
|
/**
|
|
* @brief Configure the ADC2 channel, including setting attenuation.
|
|
*
|
|
* @note This function also configures the input GPIO pin mux to
|
|
* connect it to the ADC2 channel. It must be called before calling
|
|
* ``adc2_get_raw()`` for this channel.
|
|
*
|
|
* The default ADC full-scale voltage is 1.1V. To read higher voltages (up to the pin maximum voltage,
|
|
* usually 3.3V) requires setting >0dB signal attenuation for that ADC channel.
|
|
*
|
|
* When VDD_A is 3.3V:
|
|
*
|
|
* - 0dB attenuaton (ADC_ATTEN_0db) gives full-scale voltage 1.1V
|
|
* - 2.5dB attenuation (ADC_ATTEN_2_5db) gives full-scale voltage 1.5V
|
|
* - 6dB attenuation (ADC_ATTEN_6db) gives full-scale voltage 2.2V
|
|
* - 11dB attenuation (ADC_ATTEN_11db) gives full-scale voltage 3.9V (see note below)
|
|
*
|
|
* @note The full-scale voltage is the voltage corresponding to a maximum reading
|
|
* (depending on ADC2 configured bit width, this value is: 4095 for 12-bits, 2047
|
|
* for 11-bits, 1023 for 10-bits, 511 for 9 bits.)
|
|
*
|
|
* @note At 11dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
|
|
*
|
|
* @param channel ADC2 channel to configure
|
|
* @param atten Attenuation level
|
|
*
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
|
|
|
|
/**
|
|
* @brief Take an ADC2 reading on a single channel
|
|
*
|
|
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
|
|
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
|
|
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
|
|
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
|
|
*
|
|
* @note For a given channel, ``adc2_config_channel_atten()``
|
|
* must be called before the first time this function is called. If Wi-Fi is started via ``esp_wifi_start()``, this
|
|
* function will always fail with ``ESP_ERR_TIMEOUT``.
|
|
*
|
|
* @param channel ADC2 channel to read
|
|
*
|
|
* @param width_bit Bit capture width for ADC2
|
|
*
|
|
* @param raw_out the variable to hold the output data.
|
|
*
|
|
* @return
|
|
* - ESP_OK if success
|
|
* - ESP_ERR_TIMEOUT the WIFI is started, using the ADC2
|
|
*/
|
|
esp_err_t adc2_get_raw(adc2_channel_t channel, adc_bits_width_t width_bit, int* raw_out);
|
|
|
|
/**
|
|
* @brief Output ADC2 reference voltage to gpio 25 or 26 or 27
|
|
*
|
|
* This function utilizes the testing mux exclusive to ADC 2 to route the
|
|
* reference voltage one of ADC2's channels. Supported gpios are gpios
|
|
* 25, 26, and 27. This refernce voltage can be manually read from the pin
|
|
* and used in the esp_adc_cal component.
|
|
*
|
|
* @param[in] gpio GPIO number (gpios 25,26,27 supported)
|
|
*
|
|
* @return
|
|
* - ESP_OK: v_ref successfully routed to selected gpio
|
|
* - ESP_ERR_INVALID_ARG: Unsupported gpio
|
|
*/
|
|
esp_err_t adc2_vref_to_gpio(gpio_num_t gpio);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /*_DRIVER_ADC_H_*/
|
|
|