jacob.eva/opencom_xl_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'upstream/master'

Browse Source
This commit is contained in:
jacob.eva 2024-09-17 16:21:04 +01:00
commit 2e0cf9e7d0
No known key found for this signature in database
GPG Key ID: 0B92E083BBCCAA1E
17 changed files with 165 additions and 40 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.gitignore vendored
View File

@ -7,3 +7,4 @@ Release/*.zip
Release/*.json
Console/build
build/*
.vscode

64
Boards.h
View File

@ -39,6 +39,7 @@
#define BOARD_RNODE_NG_20 0x40
#define BOARD_RNODE_NG_21 0x41
#define BOARD_T3S3 0x42
#define BOARD_TECHO 0x43
#define BOARD_GENERIC_NRF52 0x50
#define BOARD_FREENODE 0x52
@ -50,7 +51,7 @@
#if defined(ESP32)
#define PLATFORM PLATFORM_ESP32
#define MCU_VARIANT MCU_ESP32
#elif defined(NRF52840_XXAA)
#elif defined(NRF52840_XXAA) || defined(_VARIANT_PCA10056_)
#include <variant.h>
#define PLATFORM PLATFORM_NRF52
#define MCU_VARIANT MCU_NRF52
@ -629,7 +630,66 @@
#endif
#elif MCU_VARIANT == MCU_NRF52
#if BOARD_MODEL == BOARD_FREENODE
#if BOARD_MODEL == BOARD_TECHO
#define VALIDATE_FIRMWARE false
//#define GPS_BAUD_RATE 115200
//#define PIN_GPS_TX 41
//#define PIN_GPS_RX 40
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
//#define HAS_EEPROM true
//#define HAS_SD true
//#define HAS_DISPLAY true
//#define HAS_CONSOLE true
//#define HAS_TXCO true
//#define DISPLAY EINK_BW
//#define HAS_BLE true
//#define HAS_PMU true
#define CONFIG_UART_BUFFER_SIZE 40000
#define CONFIG_QUEUE_0_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define BLE_MANUFACTURER "LilyGO"
#define BLE_MODEL "T-Echo"
#define INTERFACE_COUNT 1
//#define I2C_SDA 26
//#define I2C_SCL 27
#define CONFIG_QUEUE_1_SIZE 40000
// first interface in list is the primary
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
}
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
24, // pin_ss
19, // pin_sclk
22, // pin_mosi
23, // pin_miso
17, // pin_busy
20, // pin_dio
25, // pin_reset
-1, // pin_txen
-1, // pin_rxen
21 // pin_tcxo_enable
}
};
const int pin_disp_cs = 30;
const int pin_disp_dc = 28;
const int pin_disp_reset = 2;
const int pin_disp_busy = 3;
const int pin_disp_en = 43;
const int pin_led_rx = LED_BLUE;
const int pin_led_tx = LED_RED;
#elif BOARD_MODEL == BOARD_FREENODE
#define HAS_EEPROM false
#define HAS_DISPLAY true
#define DISPLAY EINK_BW

4
Config.h
View File

@ -78,9 +78,11 @@
bool pmu_ready = false;
bool promisc = false;
bool implicit = false;
volatile bool packet_ready = false;
uint8_t implicit_l = 0;
volatile bool packet_ready = false;
volatile uint8_t packet_interface = 0xFF;
uint8_t op_mode = MODE_HOST;
uint8_t model = 0x00;
uint8_t hwrev = 0x00;

6
Console/Makefile
View File

@ -14,10 +14,10 @@ dirs:
@mkdir -p ./build/images
pages:
python ./build.py
python3 ./build.py
pages-debug:
python ./build.py --no-gz --no-remap
python3 ./build.py --no-gz --no-remap
sourcepack:
@echo Packing firmware sources...
@ -44,4 +44,4 @@ site: clean external dirs data sourcepack pages
local: clean external dirs data sourcepack pages-debug
serve:
python -m http.server 7777 --bind 127.0.0.1 --directory ./build
python3 -m http.server 7777 --bind 127.0.0.1 --directory ./build

9
Device.h
View File

@ -231,14 +231,12 @@ void device_validate_partitions() {
// todo, add bootloader, partition table, or softdevice?
calculate_region_hash(APPLICATION_START, APPLICATION_START+get_fw_length(), dev_firmware_hash);
#endif
#if VALIDATE_FIRMWARE
for (uint8_t i = 0; i < DEV_HASH_LEN; i++) {
if (dev_firmware_hash_target[i] != dev_firmware_hash[i]) {
fw_signature_validated = false;
break;
}
}
#endif
}
bool device_firmware_ok() {
@ -247,6 +245,7 @@ bool device_firmware_ok() {
#if MCU_VARIANT == MCU_ESP32 || MCU_VARIANT == MCU_NRF52
bool device_init() {
#if VALIDATE_FIRMWARE
if (bt_ready) {
#if MCU_VARIANT == MCU_ESP32
for (uint8_t i=0; i<EEPROM_SIG_LEN; i++){dev_eeprom_signature[i]=EEPROM.read(eeprom_addr(ADDR_SIGNATURE+i));}
@ -282,9 +281,9 @@ bool device_init() {
hash.end(dev_hash);
#endif
device_load_signature();
device_validate_signature();
device_validate_partitions();
#if MCU_VARIANT == MCU_NRF52
@ -295,5 +294,9 @@ bool device_init() {
} else {
return false;
}
#else
// Skip hash comparison and checking BT
return true;
#endif
}
#endif

2
Documentation/CONTRIBUTING.md
View File

@ -197,7 +197,7 @@ upload-wicked_esp32:
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32c3/RNode_Firmware_CE.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32c3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32c3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
```
#### nRF52
```

43
Makefile
View File

@ -21,7 +21,7 @@ clean:
-rm -r ./build
-rm ./Release/rnode_firmware*
prep: prep-esp32 prep-samd
prep: prep-esp32 prep-nrf prep-samd
prep-esp32:
arduino-cli core update-index --config-file arduino-cli.yaml
@ -37,6 +37,7 @@ prep-samd:
prep-nrf:
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install adafruit:nrf52 --config-file arduino-cli.yaml
arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
arduino-cli lib install "Crypto"
arduino-cli lib install "Adafruit GFX Library"
@ -50,11 +51,11 @@ console-site:
spiffs: console-site spiffs-image
spiffs-image:
python Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin
python3 Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin
upload-spiffs:
@echo Deploying SPIFFS image...
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
firmware-tbeam:
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
@ -62,6 +63,14 @@ firmware-tbeam:
firmware-tbeam_sx126x:
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
firmware-techo: firmware-techo4 firmware-techo9
firmware-techo4:
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x16\""
firmware-techo9:
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x17\""
firmware-t3s3_sx1262:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\""
@ -121,56 +130,62 @@ upload-tbeam:
@sleep 1
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-techo:
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn adafruit:nrf52:pca10056
unzip -o build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.zip -d build/adafruit.nrf52.pca10056
#rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
../Reticulum/RNS/Utilities/rnodeconf.py $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
upload-lora32_v10:
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v20:
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v21:
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-heltec32_v2:
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V2
@sleep 1
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-heltec32_v3:
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V3
@sleep 1
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32-s3 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rnode_ng_20:
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rnode_ng_21:
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-t3s3:
@echo
@ -178,7 +193,7 @@ upload-t3s3:
@read
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3
@sleep 2
python ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
@echo
@echo Press the RESET button on the board now, and hit enter
@read
@ -190,7 +205,7 @@ upload-featheresp32:
@sleep 1
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/opencom_xl_firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-freenode:
arduino-cli upload -p /dev/ttyACM0 --fqbn rakwireless:nrf52:WisCoreRAK4631Board
@ -208,7 +223,7 @@ release: release-all
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes
release-hashes:
python ./release_hashes.py > ./Release/release.json
python3 ./release_hashes.py > ./Release/release.json
release-tbeam:
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""

3
ROM.h
View File

@ -32,6 +32,9 @@
#define MODEL_12 0x12
#define MODEL_13 0x13 // RAK4631 LF with WisBlock SX1280 module (LIBSYS002)
#define MODEL_14 0x14 // RAK4631 HF with WisBlock SX1280 module (LIBSYS002)
#define PRODUCT_TECHO 0x15
#define MODEL_16 0x16 // T-Echo 433
#define MODEL_17 0x17 // T-Echo 915
#define MODEL_21 0x21 // European band, 868MHz
#define MODEL_A1 0xA1
#define MODEL_A5 0xA5 // T3S3 SX1280 PA

7
Radio.cpp
View File

@ -744,6 +744,8 @@ void sx126x::enableTCXO() {
uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF};
#elif BOARD_MODEL == BOARD_TBEAM
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
#elif BOARD_MODEL == BOARD_TECHO
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
#elif BOARD_MODEL == BOARD_T3S3
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
#else
@ -2559,9 +2561,12 @@ void sx128x::disableCrc()
setPacketParams(_preambleLength, _implicitHeaderMode, _payloadLength, _crcMode);
}
byte sx128x::random()
uint8_t sx128x::random()
{
// todo: implement
return 0x4; //chosen by fair die roll
//guarenteed to be random
//https://xkcd.com/221/
}
void sx128x::setSPIFrequency(uint32_t frequency)

2
Release/esptool/esptool.py
View File

@ -1,4 +1,4 @@
#!/usr/bin/env python
#!/usr/bin/env python3
#
# SPDX-FileCopyrightText: 2014-2022 Fredrik Ahlberg, Angus Gratton, Espressif Systems (Shanghai) CO LTD, other contributors as noted.
#

2
Release/esptool/gen_esp32part.py
View File

@ -1,4 +1,4 @@
#!/usr/bin/env python
#!/usr/bin/env python3
#
# ESP32 partition table generation tool
#

2
Release/esptool/spiffsgen.py
View File

@ -1,4 +1,4 @@
#!/usr/bin/env python
#!/usr/bin/env python3
#
# spiffsgen is a tool used to generate a spiffs image from a directory
#

20
Utilities.h
View File

@ -217,6 +217,18 @@ uint8_t boot_vector = 0x00;
void led_tx_on() { analogWrite(pin_led_tx, 1); }
void led_tx_off() { analogWrite(pin_led_tx, 0); }
#endif
#if BOARD_MODEL == BOARD_RAK4631
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
#elif BOARD_MODEL == BOARD_TECHO
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
#endif
>>>>>>> upstream/master
#endif
void hard_reset(void) {
@ -585,6 +597,7 @@ void serial_write(uint8_t byte) {
} else {
SerialBT.write(byte);
#if MCU_VARIANT == MCU_NRF52 && HAS_BLE
// This ensures that the TX buffer is flushed after a frame is queued in serial.
// serial_in_frame is used to ensure that the flush only happens at the end of the frame
if (serial_in_frame && byte == FEND) {
@ -594,6 +607,7 @@ void serial_write(uint8_t byte) {
else if (!serial_in_frame && byte == FEND) {
serial_in_frame = true;
}
#endif
}
#else
Serial.write(byte);
@ -1164,6 +1178,8 @@ uint16_t getQueueSize(uint8_t index) {
case 11:
return CONFIG_QUEUE_11_SIZE;
#endif
default:
return CONFIG_QUEUE_0_SIZE;
}
}
@ -1338,7 +1354,7 @@ bool eeprom_product_valid() {
#if PLATFORM == PLATFORM_ESP32
if (rval == PRODUCT_RNODE || rval == BOARD_RNODE_NG_20 || rval == BOARD_RNODE_NG_21 || rval == PRODUCT_HMBRW || rval == PRODUCT_TBEAM || rval == PRODUCT_T32_10 || rval == PRODUCT_T32_20 || rval == PRODUCT_T32_21 || rval == PRODUCT_H32_V2 || rval == PRODUCT_H32_V3) {
#elif PLATFORM == PLATFORM_NRF52
if (rval == PRODUCT_RAK4631 || rval == PRODUCT_HMBRW || rval == PRODUCT_FREENODE) {
if (rval == PRODUCT_TECHO || rval == PRODUCT_RAK4631 || rval == PRODUCT_HMBRW || rval == PRODUCT_FREENODE) {
#else
if (false) {
#endif
@ -1366,6 +1382,8 @@ bool eeprom_model_valid() {
if (model == MODEL_FF || model == MODEL_FE) {
#elif BOARD_MODEL == BOARD_TBEAM
if (model == MODEL_E4 || model == MODEL_E9 || model == MODEL_E3 || model == MODEL_E8) {
#elif BOARD_MODEL == BOARD_TECHO
if (model == MODEL_16 || model == MODEL_17) {
#elif BOARD_MODEL == BOARD_LORA32_V1_0
if (model == MODEL_BA || model == MODEL_BB) {
#elif BOARD_MODEL == BOARD_LORA32_V2_0

1
arduino-cli.yaml
View File

@ -1,5 +1,6 @@
board_manager:
additional_urls:
- https://adafruit.github.io/arduino-board-index/package_adafruit_index.json
- https://liberatedsystems.co.uk/rnode-firmware-ce/esp-custom-package.json
- https://raw.githubusercontent.com/RAKwireless/RAKwireless-Arduino-BSP-Index/main/package_rakwireless_index.json
- http://unsigned.io/arduino/package_unsignedio_UnsignedBoards_index.json

33
opencom_xl_firmware.ino
View File

@ -17,8 +17,9 @@
#include <SPI.h>
#include "Utilities.h"
#if MCU_VARIANT == MCU_NRF52
#define INTERFACE_SPI
#if MCU_VARIANT == MCU_NRF52
#define INTERFACE_SPI
#if BOARD_MODEL == BOARD_RAK4631
// Required because on RAK4631, non-default SPI pins must be initialised when class is declared.
SPIClass interface_spi[1] = {
// SX1262
@ -29,6 +30,17 @@
interface_pins[0][2]
)
};
#elif BOARD_MODEL == BOARD_TECHO
SPIClass interface_spi[1] = {
// SX1262
SPIClass(
NRF_SPIM3,
interface_pins[0][3],
interface_pins[0][1],
interface_pins[0][2]
)
};
#endif
#endif
#ifndef INTERFACE_SPI
@ -363,6 +375,7 @@ void receive_callback(uint8_t index, int packet_size) {
getPacketData(selected_radio, packet_size);
seq = SEQ_UNSET;
packet_interface = index;
packet_ready = true;
} else if (isSplitPacket(header) && seq != sequence) {
@ -388,6 +401,8 @@ void receive_callback(uint8_t index, int packet_size) {
}
getPacketData(selected_radio, packet_size);
packet_interface = index;
packet_ready = true;
}
} else {
@ -396,6 +411,8 @@ void receive_callback(uint8_t index, int packet_size) {
read_len = 0;
getPacketData(selected_radio, packet_size);
packet_interface = index;
packet_ready = true;
}
@ -1118,11 +1135,11 @@ void validate_status() {
if (eeprom_checksum_valid()) {
eeprom_ok = true;
if (modems_installed) {
if (device_init()) {
hw_ready = true;
} else {
hw_ready = false;
}
if (device_init()) {
hw_ready = true;
} else {
hw_ready = false;
}
} else {
hw_ready = false;
Serial.write("No valid radio module found\r\n");
@ -1189,7 +1206,7 @@ void loop() {
#endif
kiss_indicate_stat_rssi();
kiss_indicate_stat_snr();
kiss_write_packet(1);
kiss_write_packet(packet_interface);
}
bool ready = false;

2
partition_hashes
View File

@ -1,4 +1,4 @@
#!/usr/bin/env python
#!/usr/bin/env python3
# Copyright (C) 2023, Mark Qvist

4
release_hashes.py
View File

@ -1,4 +1,4 @@
#!/bin/python
#!/bin/python3
# Copyright (C) 2023, Mark Qvist
@ -47,4 +47,4 @@ for filename in files:
"version": target_version
}
print(json.dumps(release_hashes))
print(json.dumps(release_hashes))