diff --git a/Boards.h b/Boards.h index c9ab90f..ef8f026 100644 --- a/Boards.h +++ b/Boards.h @@ -14,6 +14,7 @@ // along with this program. If not, see . #include "Interfaces.h" +#include "ROM.h" #ifndef BOARDS_H #define BOARDS_H @@ -24,6 +25,7 @@ #define MCU_ESP32 0x81 #define MCU_NRF52 0x71 + // Boards #define BOARD_RNODE 0x31 #define BOARD_HMBRW 0x32 #define BOARD_TBEAM 0x33 @@ -36,10 +38,11 @@ #define BOARD_HELTEC32_V3 0x3A #define BOARD_RNODE_NG_20 0x40 #define BOARD_RNODE_NG_21 0x41 - #define BOARD_RNODE_NG_22 0x42 + #define BOARD_T3S3 0x42 #define BOARD_GENERIC_NRF52 0x50 #define BOARD_FREENODE 0x52 + // Displays #define OLED 0x01 #define EINK_BW 0x02 #define EINK_3C 0x03 @@ -545,7 +548,7 @@ } }; - #elif BOARD_MODEL == BOARD_RNODE_NG_22 + #elif BOARD_MODEL == BOARD_T3S3 #define IS_ESP32S3 true #define HAS_DISPLAY true @@ -585,7 +588,7 @@ #endif #endif - + #if BOARD_VARIANT == MODEL_A1 const uint8_t interfaces[INTERFACE_COUNT] = {SX1262}; const bool interface_cfg[INTERFACE_COUNT][3] = { // SX1262 @@ -595,6 +598,17 @@ true // DIO2_AS_RF_SWITCH }, }; + #elif BOARD_VARIANT == MODEL_A5 // SX1280 with PA + const uint8_t interfaces[INTERFACE_COUNT] = {SX1280}; + const bool interface_cfg[INTERFACE_COUNT][3] = { + // SX1280 + { + false, // DEFAULT_SPI + false, // HAS_TCXO + false // DIO2_AS_RF_SWITCH + }, + }; + #endif const uint8_t interface_pins[INTERFACE_COUNT][10] = { // SX1262 { @@ -610,7 +624,6 @@ -1 // pin_tcxo_enable } }; - #else #error An unsupported ESP32 board was selected. Cannot compile RNode firmware. #endif @@ -652,6 +665,7 @@ #define INTERFACE_COUNT 2 + #define CONFIG_QUEUE_1_SIZE 20000 // first interface in list is the primary const uint8_t interfaces[INTERFACE_COUNT] = {SX126X, SX128X}; const bool interface_cfg[INTERFACE_COUNT][3] = { @@ -724,6 +738,7 @@ #endif #ifndef INTERFACE_SPI + // INTERFACE_SPI is only required on NRF52 platforms, as the SPI pins are set in the class constructor and not by a setter method. // Even if custom SPI interfaces are not needed, the array must exist to prevent compilation errors. #define INTERFACE_SPI const SPIClass interface_spi[1]; diff --git a/Display.h b/Display.h index fb99943..95b3229 100644 --- a/Display.h +++ b/Display.h @@ -68,7 +68,7 @@ void busyCallback(const void* p) { #define DISP_RST -1 #define DISP_ADDR 0x3C #endif -#elif BOARD_MODEL == BOARD_RNODE_NG_22 +#elif BOARD_MODEL == BOARD_T3S3 #if DISPLAY == OLED #define DISP_RST 21 #define DISP_ADDR 0x3C @@ -200,7 +200,7 @@ bool display_init() { digitalWrite(pin_display_en, LOW); delay(50); digitalWrite(pin_display_en, HIGH); - #elif BOARD_MODEL == BOARD_RNODE_NG_22 + #elif BOARD_MODEL == BOARD_T3S3 Wire.begin(SDA_OLED, SCL_OLED); #elif BOARD_MODEL == BOARD_HELTEC32_V2 Wire.begin(SDA_OLED, SCL_OLED); diff --git a/Makefile b/Makefile index ab9e292..9357aaf 100644 --- a/Makefile +++ b/Makefile @@ -71,8 +71,11 @@ firmware-tbeam: firmware-tbeam_sx126x: arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\"" -firmware-t3s3: - arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\"" +firmware-t3s3_sx1262: + arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\"" + +firmware-t3s3_sx1280_pa: + arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\"" firmware-lora32_v10: arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" @@ -113,8 +116,14 @@ firmware-featheresp32: firmware-genericesp32: arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\"" +firmware-rak4631: + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\"" + +firmware-rak4631_sx1280: + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\"" + firmware-freenode: - arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x52\"" + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x52\" \"-DBOARD_VARIANT=0x21\"" upload: arduino-cli upload -p /dev/ttyUSB0 --fqbn unsignedio:avr:rnode @@ -209,8 +218,6 @@ upload-freenode: @sleep 3 python3 rnodeconf.py /dev/ttyACM0 --set-firmware-length $$(ls -l ./build/rakwireless.nrf52.WisCoreRAK4631Board/freeNode_Firmware.ino.bin | awk '{print $$5}') - - release: release-all release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes @@ -380,3 +387,13 @@ release-freenode: arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\"" cp build/rakwireless.nrf52.WisCoreRAK4631Board/freeNode_Firmware.ino.hex build/freeNode_Firmware.hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/freeNode_Firmware.hex Release/freeNode_Firmware.zip +release-rak4631: + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\"" + cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631.hex Release/rnode_firmware_rak4631.zip + +release-rak4631_sx1280: + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\"" + cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631_sx1280.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631_sx1280.hex Release/rnode_firmware_rak4631_sx1280.zip + diff --git a/README.md b/README.md index 12b9b0b..9935a0e 100644 --- a/README.md +++ b/README.md @@ -33,6 +33,7 @@ You must have at least version `2.1.3` of `rnodeconf` installed to update the RN | Name | Manufacturer | Link | Transceiver | MCU | Description | | :---: | :---: | :---: | :---: | :---: | :---: | | Handheld v2.x RNodes | [Mark Qvist](https://unsigned.io) | [Buy here](https://unsigned.io/shop/product/handheld-rnode) | SX1276 | ESP32 | +| openCom XL | [Liberated Embedded Systems](https://liberatedsystems.co.uk) | [Buy here](https://store.liberatedsystems.co.uk/product/opencom-xl/) | SX1262 & SX1280 | nRF52 | Supports utilisation of both modems at once | ### Homebrew devices | Board name | Link | Transceiver | MCU | Description | diff --git a/ROM.h b/ROM.h index 34fde86..323449d 100644 --- a/ROM.h +++ b/ROM.h @@ -30,8 +30,11 @@ #define PRODUCT_FREENODE 0x20 #define MODEL_11 0x11 #define MODEL_12 0x12 + #define MODEL_13 0x13 // RAK4631 LF with WisBlock SX1280 module (LIBSYS002) + #define MODEL_14 0x14 // RAK4631 HF with WisBlock SX1280 module (LIBSYS002) #define MODEL_21 0x21 // European band, 868MHz - #define MODEL_A1 0xA1 + #define MODEL_A1 0xA1 + #define MODEL_A5 0xA5 // T3S3 SX1280 PA #define MODEL_A6 0xA6 #define MODEL_A4 0xA4 #define MODEL_A9 0xA9 diff --git a/Radio.cpp b/Radio.cpp index c2f17f3..46d51fd 100644 --- a/Radio.cpp +++ b/Radio.cpp @@ -735,7 +735,7 @@ void sx126x::enableTCXO() { uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF}; #elif BOARD_MODEL == BOARD_TBEAM uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF}; - #elif BOARD_MODEL == BOARD_RNODE_NG_22 + #elif BOARD_MODEL == BOARD_T3S3 uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF}; #else uint8_t buf[4] = {0}; @@ -2192,11 +2192,117 @@ void sx128x::disableTCXO() { } void sx128x::setTxPower(int level, int outputPin) { - // PA calculation currently only works for the LoRa1280F27. Support for - // other assemblies would be appreciated in a PR. - if (outputPin == PA_OUTPUT_PA_BOOST_PIN) { - if (level > 27) { - level = 27; + uint8_t tx_buf[2]; + #if BOARD_VARIANT == MODEL_21 + if (level > 27) { + level = 27; + } else if (level < 0) { + level = 0; + } + + _txp = level; + + int reg_value; + + switch (level) { + case 0: + reg_value = -18; + break; + case 1: + reg_value = -17; + break; + case 2: + reg_value = -16; + break; + case 3: + reg_value = -15; + break; + case 4: + reg_value = -14; + break; + case 5: + reg_value = -13; + break; + case 6: + reg_value = -12; + break; + case 7: + reg_value = -10; + break; + case 8: + reg_value = -9; + break; + case 9: + reg_value = -8; + break; + case 10: + reg_value = -7; + break; + case 11: + reg_value = -6; + break; + case 12: + reg_value = -5; + break; + case 13: + reg_value = -4; + break; + case 14: + reg_value = -3; + break; + case 15: + reg_value = -2; + break; + case 16: + reg_value = -1; + break; + case 17: + reg_value = 0; + break; + case 18: + reg_value = 1; + break; + case 19: + reg_value = 2; + break; + case 20: + reg_value = 3; + break; + case 21: + reg_value = 4; + break; + case 22: + reg_value = 5; + break; + case 23: + reg_value = 6; + break; + case 24: + reg_value = 8; + break; + case 25: + reg_value = 9; + break; + case 26: + reg_value = 12; + break; + case 27: + reg_value = 13; + break; + default: + reg_value = 0; + break; + } + + tx_buf[0] = reg_value + 18; + tx_buf[1] = 0xE0; // ramping time - 20 microseconds + + executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2); + + #elif BOARD_VARIANT == MODEL_A5 + // T3S3 SX1280 PA + if (level > 20) { + level = 20; } else if (level < 0) { level = 0; } @@ -2206,7 +2312,7 @@ void sx128x::setTxPower(int level, int outputPin) { int reg_value; switch (level) { - case 0: + /*case 0: reg_value = -18; break; case 1: @@ -2265,57 +2371,31 @@ void sx128x::setTxPower(int level, int outputPin) { break; case 19: reg_value = 2; - break; + break;*/ case 20: reg_value = 3; break; - case 21: - reg_value = 4; - break; - case 22: - reg_value = 5; - break; - case 23: - reg_value = 6; - break; - case 24: - reg_value = 8; - break; - case 25: - reg_value = 9; - break; - case 26: - reg_value = 12; - break; - case 27: - reg_value = 13; + default: + reg_value = 0; break; } - - uint8_t tx_buf[2]; - - tx_buf[0] = reg_value; + tx_buf[0] = reg_value + 18; tx_buf[1] = 0xE0; // ramping time - 20 microseconds - - executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2); - } else { + #else + // For SX1280 boards with no specific PA requirements if (level > 13) { level = 13; } else if (level < -18) { level = -18; } + _txp = level; - level = level + 18; - - uint8_t tx_buf[2]; - - tx_buf[0] = level; + tx_buf[0] = level + 18; tx_buf[1] = 0xE0; // ramping time - 20 microseconds - - executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2); - } + #endif + executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2); } uint8_t sx128x::getTxPower() { diff --git a/Utilities.h b/Utilities.h index 19c751f..ef10aae 100644 --- a/Utilities.h +++ b/Utilities.h @@ -71,9 +71,9 @@ uint8_t eeprom_read(uint32_t mapped_addr); #if BOARD_MODEL == BOARD_HELTEC32_V3 //https://github.com/espressif/esp-idf/issues/8855 #include "hal/wdt_hal.h" - #elif BOARD_MODEL == BOARD_RNODE_NG_22 + #elif BOARD_MODEL == BOARD_T3S3 #include "hal/wdt_hal.h" - #else BOARD_MODEL != BOARD_RNODE_NG_22 + #else BOARD_MODEL != BOARD_T3S3 #include "soc/rtc_wdt.h" #endif #define ISR_VECT IRAM_ATTR @@ -143,7 +143,7 @@ uint8_t boot_vector = 0x00; void led_rx_off() { digitalWrite(pin_led_rx, LOW); } void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } void led_tx_off() { digitalWrite(pin_led_tx, LOW); } - #elif BOARD_MODEL == BOARD_RNODE_NG_22 + #elif BOARD_MODEL == BOARD_T3S3 void led_rx_on() { digitalWrite(pin_led_rx, HIGH); } void led_rx_off() { digitalWrite(pin_led_rx, LOW); } void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } @@ -971,6 +971,9 @@ void set_implicit_length(uint8_t len) { } void setTXPower(RadioInterface* radio, int txp) { + // Todo, revamp this function. The current parameters for setTxPower are + // suboptimal, as some chips have power amplifiers which means that the max + // dBm is not always the same. if (model == MODEL_11) { if (interfaces[radio->getIndex()] == SX128X) { radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN); @@ -998,6 +1001,7 @@ void setTXPower(RadioInterface* radio, int txp) { if (model == MODEL_A2) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN); if (model == MODEL_A3) radio->setTxPower(txp, PA_OUTPUT_RFO_PIN); if (model == MODEL_A4) radio->setTxPower(txp, PA_OUTPUT_RFO_PIN); + if (model == MODEL_A5) radio->setTxPower(txp, PA_OUTPUT_RFO_PIN); if (model == MODEL_A6) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN); if (model == MODEL_A7) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN); if (model == MODEL_A8) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN); @@ -1346,8 +1350,8 @@ bool eeprom_model_valid() { if (model == MODEL_A3 || model == MODEL_A8) { #elif BOARD_MODEL == BOARD_RNODE_NG_21 if (model == MODEL_A2 || model == MODEL_A7) { - #elif BOARD_MODEL == BOARD_RNODE_NG_22 - if (model == MODEL_A1 || model == MODEL_A6) { + #elif BOARD_MODEL == BOARD_T3S3 + if (model == MODEL_A1 || model == MODEL_A5 || model == MODEL_A6) { #elif BOARD_MODEL == BOARD_HMBRW if (model == MODEL_FF || model == MODEL_FE) { #elif BOARD_MODEL == BOARD_TBEAM