From 6ed29517c72129acdb2708629a75949888c4d9e5 Mon Sep 17 00:00:00 2001 From: Aaron Bieber Date: Fri, 27 Sep 2024 09:20:56 -0600 Subject: [PATCH 1/2] Revamp makefile to be more dynamic and reduce much some duplication --- Makefile | 200 ++++++++++++++++++++++++----------------------- arduino-cli.yaml | 1 - 2 files changed, 101 insertions(+), 100 deletions(-) diff --git a/Makefile b/Makefile index fa92457..ae20fde 100644 --- a/Makefile +++ b/Makefile @@ -15,32 +15,49 @@ ESP_IDF_VER = 2.0.17 +V ?= 0 +VFLAG = +ifeq "$(V)" "1" +VFLAG =-v +endif + +COMMON_BUILD_FLAGS = $(VFLAG) -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" +COMMON_UPLOAD_FlAGS = $(VFLAG) --chip esp32 --port $(SERIAL_DEV) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 + +ifndef SERIAL_DEV + ifneq (,$(wildcard /dev/ttyUSB0)) + SERIAL_DEV = /dev/ttyUSB0 + else ifneq (,$(wildcard /dev/ttyACM0)) + SERIAL_DEV = /dev/ttyACM0 + else ifneq (,$(wildcard /dev/cu.usbserial*)) + SERIAL_DEV = $(wildcard /dev/cu.usbserial*) + else + SERIAL_DEV = unknown + endif +endif + all: release clean: - -rm -r ./build - -rm ./Release/rnode_firmware* + -rm -rf ./build + -rm -f ./Release/rnode_firmware* -prep: prep-avr prep-esp32 prep-samd +prep: prep-esp32 prep-samd -prep-avr: +prep-index: arduino-cli core update-index --config-file arduino-cli.yaml - arduino-cli core install arduino:avr --config-file arduino-cli.yaml - arduino-cli core install unsignedio:avr --config-file arduino-cli.yaml prep-esp32: - arduino-cli core update-index --config-file arduino-cli.yaml arduino-cli core install esp32:esp32@2.0.17 --config-file arduino-cli.yaml arduino-cli lib install "Adafruit SSD1306" arduino-cli lib install "XPowersLib" arduino-cli lib install "Crypto" + arduino-cli lib install "Adafruit NeoPixel" prep-samd: - arduino-cli core update-index --config-file arduino-cli.yaml arduino-cli core install adafruit:samd --config-file arduino-cli.yaml prep-nrf: - arduino-cli core update-index --config-file arduino-cli.yaml arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml arduino-cli lib install "Crypto" arduino-cli lib install "Adafruit GFX Library" @@ -50,167 +67,157 @@ prep-nrf: console-site: make -C Console clean site -spiffs: console-site spiffs-image +spiffs: console-site spiffs-image spiffs-image: python Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin upload-spiffs: @echo Deploying SPIFFS image... - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin -firmware: - arduino-cli compile --fqbn unsignedio:avr:rnode - -firmware-mega2560: - arduino-cli compile --fqbn arduino:avr:mega +all-firmware: $(shell grep ^firmware- Makefile | cut -d: -f1) firmware-tbeam: - arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\"" + arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\"" firmware-tbeam_sx126x: - arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\"" + arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\"" firmware-t3s3_sx1262: - arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\"" + arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\"" firmware-t3s3_sx1280_pa: - arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\"" + arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\"" firmware-lora32_v10: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" firmware-lora32_v10_extled: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\"" firmware-lora32_v20: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\"" firmware-lora32_v21: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\"" firmware-lora32_v21_extled: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\"" firmware-lora32_v21_tcxo: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\"" firmware-heltec32_v2: - arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\"" + arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\"" firmware-heltec32_v2_extled: - arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\"" firmware-heltec32_v3: - arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\"" + arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\"" firmware-rnode_ng_20: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\"" firmware-rnode_ng_21: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\"" firmware-featheresp32: - arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\"" + arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\"" firmware-genericesp32: - arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\"" + arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\"" firmware-rak4631: - arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\"" + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\"" firmware-rak4631_sx1280: - arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\"" + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\"" firmware-freenode: - arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\"" - -upload: - arduino-cli upload -p /dev/ttyUSB0 --fqbn unsignedio:avr:rnode - -upload-mega2560: - arduino-cli upload -p /dev/ttyACM0 --fqbn arduino:avr:mega + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\"" upload-tbeam: - arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:t-beam + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:t-beam @sleep 1 - rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-lora32_v10: - arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-lora32_v20: - arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-lora32_v21: - arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-heltec32_v2: - arduino-cli upload -p /dev/ttyUSB1 --fqbn esp32:esp32:heltec_wifi_lora_32_V2 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:heltec_wifi_lora_32_V2 @sleep 1 - rnodeconf /dev/ttyUSB1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-heltec32_v3: - arduino-cli upload -p /dev/ttyUSB1 --fqbn esp32:esp32:heltec_wifi_lora_32_V3 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:heltec_wifi_lora_32_V3 @sleep 1 - rnodeconf /dev/ttyUSB1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py --chip esp32-s3 --port $(SERIAL_DEV) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin upload-rnode_ng_20: - arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-rnode_ng_21: - arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-t3s3: @echo @echo Put board into flashing mode by holding BOOT button while momentarily pressing the RESET button. Hit enter when done. @read - arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:esp32s3 @sleep 2 - python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py --chip esp32s3 --port $(SERIAL_DEV) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin @echo @echo Press the RESET button on the board now, and hit enter @read @sleep 1 - rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin) upload-featheresp32: - arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32 + arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:featheresp32 @sleep 1 - rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin) + rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-rak4631: - arduino-cli upload -p /dev/ttyACM0 --fqbn rakwireless:nrf52:WisCoreRAK4631Board + arduino-cli upload -p $(SERIAL_DEV) --fqbn rakwireless:nrf52:WisCoreRAK4631Board unzip -o build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.zip -d build/rakwireless.nrf52.WisCoreRAK4631Board - rnodeconf /dev/ttyACM0 --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.bin | grep -o '^\S*') + rnodeconf $(SERIAL_DEV) --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.bin | grep -o '^\S*') release: release-all @@ -220,7 +227,7 @@ release-hashes: python ./release_hashes.py > ./Release/release.json release-tbeam: - arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\"" + arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam.boot_app0 cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin build/rnode_firmware_tbeam.bin cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_tbeam.bootloader @@ -229,7 +236,7 @@ release-tbeam: rm -r build release-tbeam_sx1262: - arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\"" + arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_sx1262.boot_app0 cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin build/rnode_firmware_tbeam_sx1262.bin cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_tbeam_sx1262.bootloader @@ -238,7 +245,7 @@ release-tbeam_sx1262: rm -r build release-lora32_v10: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v10.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader @@ -247,7 +254,7 @@ release-lora32_v10: rm -r build release-lora32_v20: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v20.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader @@ -256,7 +263,7 @@ release-lora32_v20: rm -r build release-lora32_v21: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader @@ -265,7 +272,7 @@ release-lora32_v21: rm -r build release-lora32_v10_extled: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v10.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader @@ -274,7 +281,7 @@ release-lora32_v10_extled: rm -r build release-lora32_v20_extled: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v20.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader @@ -283,7 +290,7 @@ release-lora32_v20_extled: rm -r build release-lora32_v21_extled: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader @@ -292,7 +299,7 @@ release-lora32_v21_extled: rm -r build release-lora32_v21_tcxo: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21_tcxo.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21_tcxo.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21_tcxo.bootloader @@ -301,7 +308,7 @@ release-lora32_v21_tcxo: rm -r build release-heltec32_v2: - arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\"" + arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0 cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v2.bin cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader @@ -310,7 +317,7 @@ release-heltec32_v2: rm -r build release-heltec32_v3: - arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\"" + arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v3.boot_app0 cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v3.bin cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v3.bootloader @@ -319,7 +326,7 @@ release-heltec32_v3: rm -r build release-heltec32_v2_extled: - arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\"" + arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0 cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v2.bin cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader @@ -328,7 +335,7 @@ release-heltec32_v2_extled: rm -r build release-rnode_ng_20: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_ng20.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_ng20.bootloader @@ -337,7 +344,7 @@ release-rnode_ng_20: rm -r build release-rnode_ng_21: - arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\"" + arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0 cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_ng21.bin cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_ng21.bootloader @@ -346,7 +353,7 @@ release-rnode_ng_21: rm -r build release-t3s3: - arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\"" + arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3.boot_app0 cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin build/rnode_firmware_t3s3.bin cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_t3s3.bootloader @@ -355,7 +362,7 @@ release-t3s3: rm -r build release-featheresp32: - arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\"" + arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0 cp build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_featheresp32.bin cp build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_featheresp32.bootloader @@ -364,7 +371,7 @@ release-featheresp32: rm -r build release-genericesp32: - arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\"" + arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_generic.boot_app0 cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_generic.bin cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_generic.bootloader @@ -372,22 +379,17 @@ release-genericesp32: zip --junk-paths ./Release/rnode_firmware_esp32_generic.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_generic.boot_app0 build/rnode_firmware_esp32_generic.bin build/rnode_firmware_esp32_generic.bootloader build/rnode_firmware_esp32_generic.partitions rm -r build -release-mega2560: - arduino-cli compile --fqbn arduino:avr:mega -e --build-property "compiler.cpp.extra_flags=\"-DMODEM=0x01\"" - cp build/arduino.avr.mega/RNode_Firmware_CE.ino.hex Release/rnode_firmware_m2560.hex - rm -r build - release-rak4631: - arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\"" + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\"" cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631.hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631.hex Release/rnode_firmware_rak4631.zip release-rak4631_sx1280: - arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\"" + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\"" cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631_sx1280.hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631_sx1280.hex Release/rnode_firmware_rak4631_sx1280.zip release-freenode: - arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\"" + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\"" cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_freenode.hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_freenode.hex Release/rnode_firmware_freenode.zip diff --git a/arduino-cli.yaml b/arduino-cli.yaml index a8ad233..9c4d8f7 100644 --- a/arduino-cli.yaml +++ b/arduino-cli.yaml @@ -2,4 +2,3 @@ board_manager: additional_urls: - https://liberatedsystems.co.uk/rnode-firmware-ce/esp-custom-package.json - https://raw.githubusercontent.com/RAKwireless/RAKwireless-Arduino-BSP-Index/main/package_rakwireless_index.json - - http://unsigned.io/arduino/package_unsignedio_UnsignedBoards_index.json From 0aaf722088f7ad5cd998c68df675913b0ba1f6c7 Mon Sep 17 00:00:00 2001 From: "jacob.eva" Date: Fri, 11 Oct 2024 18:54:40 +0100 Subject: [PATCH 2/2] Merge --- .gitignore | 1 + Bluetooth.h | 66 ++++-- Boards.h | 127 ++++++++++-- Config.h | 11 + Console/Makefile | 6 +- Device.h | 9 +- Display.h | 38 +++- Documentation/BUILDING.md | 56 ++++- Documentation/CONTRIBUTING.md | 244 +++++++++++++++++----- Makefile | 130 +++++++----- Power.h | 12 +- README.md | 2 +- RNode_Firmware_CE.ino | 164 ++++++++------- ROM.h | 3 + Radio.cpp | 346 +++++++++++++++++-------------- Radio.h => Radio.hpp | 22 +- Release/esptool/esptool.py | 2 +- Release/esptool/gen_esp32part.py | 2 +- Release/esptool/spiffsgen.py | 2 +- Utilities.h | 200 +++--------------- arduino-cli.yaml | 1 + partition_hashes | 2 +- release_hashes.py | 4 +- src/misc/FIFOBuffer.c | 95 +++++++++ src/misc/FIFOBuffer.h | 59 ++++++ 25 files changed, 1028 insertions(+), 576 deletions(-) rename Radio.h => Radio.hpp (96%) create mode 100644 src/misc/FIFOBuffer.c create mode 100644 src/misc/FIFOBuffer.h diff --git a/.gitignore b/.gitignore index c585a06..b879ff5 100644 --- a/.gitignore +++ b/.gitignore @@ -7,3 +7,4 @@ Release/*.zip Release/*.json Console/build build/* +.vscode \ No newline at end of file diff --git a/Bluetooth.h b/Bluetooth.h index fb0abe4..4761e24 100644 --- a/Bluetooth.h +++ b/Bluetooth.h @@ -259,9 +259,34 @@ void bt_disable_pairing() { void bt_pairing_complete(uint16_t conn_handle, uint8_t auth_status) { if (auth_status == BLE_GAP_SEC_STATUS_SUCCESS) { - bt_state = BT_STATE_CONNECTED; - cable_state = CABLE_STATE_DISCONNECTED; - bt_disable_pairing(); + BLEConnection* connection = Bluefruit.Connection(conn_handle); + + ble_gap_conn_sec_mode_t security = connection->getSecureMode(); + + // On the NRF52 it is not possible with the Arduino library to reject + // requests from devices with no IO capabilities, which would allow + // bypassing pin entry through pairing using the "just works" mode. + // Therefore, we must check the security level of the connection after + // pairing to ensure "just works" has not been used. If it has, we need + // to disconnect, unpair and delete any bonding information immediately. + // Settings on the SerialBT service should prevent unauthorised access to + // the serial port anyway, but this is still wise to do regardless. + // + // Note: It may be nice to have this done in the BLESecurity class in the + // future, but as it stands right now I'd have to fork the BSP to do + // that, which I don't fancy doing. Impact on security is likely minimal. + // Requires investigation. + + if (security.sm == 1 && security.lv >= 3) { + bt_state = BT_STATE_CONNECTED; + cable_state = CABLE_STATE_DISCONNECTED; + bt_disable_pairing(); + } else { + if (connection->bonded()) { + connection->removeBondKey(); + } + connection->disconnect(); + } } else { bt_ssp_pin = 0; } @@ -273,21 +298,26 @@ bool bt_passkey_callback(uint16_t conn_handle, uint8_t const passkey[6], bool ma bt_ssp_pin += ((int)passkey[i] - 48) * pow(10, 5-i); } kiss_indicate_btpin(); - if (match_request) { - if (bt_allow_pairing) { - return true; - } + if (bt_allow_pairing) { + return true; } return false; } void bt_connect_callback(uint16_t conn_handle) { - bt_state = BT_STATE_CONNECTED; - cable_state = CABLE_STATE_DISCONNECTED; + bt_state = BT_STATE_CONNECTED; + cable_state = CABLE_STATE_DISCONNECTED; + + BLEConnection* conn = Bluefruit.Connection(conn_handle); + conn->requestPHY(BLE_GAP_PHY_2MBPS); + conn->requestMtuExchange(512+3); + conn->requestDataLengthUpdate(); } void bt_disconnect_callback(uint16_t conn_handle, uint8_t reason) { - bt_state = BT_STATE_ON; + if (reason != BLE_GAP_SEC_STATUS_SUCCESS) { + bt_state = BT_STATE_ON; + } } bool bt_setup_hw() { @@ -305,11 +335,20 @@ bool bt_setup_hw() { Bluefruit.autoConnLed(false); if (Bluefruit.begin()) { Bluefruit.setTxPower(8); // Check bluefruit.h for supported values - Bluefruit.Security.setIOCaps(true, true, false); + Bluefruit.Security.setIOCaps(true, false, false); // display, yes; yes / no, no; keyboard, no + // This device is indeed capable of yes / no through the pairing mode + // being set, but I have chosen to set it thus to force the input of the + // pin on the device initiating the pairing. This prevents it from being + // paired with automatically by a hypothetical malicious device nearby + // without physical access to the RNode. + + Bluefruit.Security.setMITM(true); Bluefruit.Security.setPairPasskeyCallback(bt_passkey_callback); - Bluefruit.Periph.setConnectCallback(bt_connect_callback); + Bluefruit.Security.setSecuredCallback(bt_connect_callback); Bluefruit.Periph.setDisconnectCallback(bt_disconnect_callback); Bluefruit.Security.setPairCompleteCallback(bt_pairing_complete); + Bluefruit.Periph.setConnInterval(6, 12); // 7.5 - 15 ms + const ble_gap_addr_t gap_addr = Bluefruit.getAddr(); char *data = (char*)malloc(BT_DEV_ADDR_LEN+1); for (int i = 0; i < BT_DEV_ADDR_LEN; i++) { @@ -340,6 +379,9 @@ void bt_start() { // start device information service bledis.begin(); + SerialBT.bufferTXD(true); // enable buffering + + SerialBT.setPermission(SECMODE_ENC_WITH_MITM, SECMODE_ENC_WITH_MITM); // enable encryption for BLE serial SerialBT.begin(); blebas.begin(); diff --git a/Boards.h b/Boards.h index c8c4d94..19dff5b 100644 --- a/Boards.h +++ b/Boards.h @@ -38,7 +38,9 @@ #define BOARD_HELTEC32_V3 0x3A #define BOARD_RNODE_NG_20 0x40 #define BOARD_RNODE_NG_21 0x41 - #define BOARD_T3S3 0x42 + #define BOARD_T3S3 0x42 + #define BOARD_TECHO 0x43 + #define BOARD_E22_ESP32 0x44 #define BOARD_GENERIC_NRF52 0x50 #define BOARD_RAK4631 0x51 @@ -50,7 +52,7 @@ #if defined(ESP32) #define PLATFORM PLATFORM_ESP32 #define MCU_VARIANT MCU_ESP32 - #elif defined(NRF52840_XXAA) + #elif defined(NRF52840_XXAA) || defined(_VARIANT_PCA10056_) #include #define PLATFORM PLATFORM_NRF52 #define MCU_VARIANT MCU_NRF52 @@ -624,12 +626,110 @@ -1 // pin_tcxo_enable } }; + + #elif BOARD_MODEL == BOARD_E22_ESP32 + #define HAS_DISPLAY true + #define DISPLAY OLED + #define HAS_BLUETOOTH true + #define HAS_BLE true + #define HAS_CONSOLE true + #define HAS_SD false + #define HAS_EEPROM true + #define I2C_SDA 21 + #define I2C_SCL 22 + #define INTERFACE_COUNT 1 + const int pin_led_rx = 2; + const int pin_led_tx = 4; + + const uint8_t interfaces[INTERFACE_COUNT] = {SX1262}; + const bool interface_cfg[INTERFACE_COUNT][3] = { + // SX1262 + { + true, // DEFAULT_SPI + true, // HAS_TCXO + true // DIO2_AS_RF_SWITCH + }, + }; + const int8_t interface_pins[INTERFACE_COUNT][10] = { + // SX1262 + { + 18, // pin_ss + 5, // pin_sclk + 27, // pin_mosi + 19, // pin_miso + 32, // pin_busy + 33, // pin_dio + 23, // pin_reset + -1, // pin_txen + 14, // pin_rxen + -1 // pin_tcxo_enable + } + }; #else #error An unsupported ESP32 board was selected. Cannot compile RNode firmware. #endif #elif MCU_VARIANT == MCU_NRF52 - #if BOARD_MODEL == BOARD_RAK4631 || BOARD_MODEL == BOARD_FREENODE + #if BOARD_MODEL == BOARD_TECHO + #define VALIDATE_FIRMWARE false + //#define GPS_BAUD_RATE 115200 + //#define PIN_GPS_TX 41 + //#define PIN_GPS_RX 40 + #define EEPROM_SIZE 296 + #define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED + //#define HAS_EEPROM true + //#define HAS_SD true + //#define HAS_DISPLAY true + //#define HAS_CONSOLE true + //#define HAS_TXCO true + //#define DISPLAY EINK_BW + //#define HAS_BLE true + //#define HAS_PMU true + #define CONFIG_UART_BUFFER_SIZE 40000 + #define CONFIG_QUEUE_0_SIZE 6144 + #define CONFIG_QUEUE_MAX_LENGTH 200 + #define BLE_MANUFACTURER "LilyGO" + #define BLE_MODEL "T-Echo" + #define INTERFACE_COUNT 1 + //#define I2C_SDA 26 + //#define I2C_SCL 27 + #define CONFIG_QUEUE_1_SIZE 40000 + // first interface in list is the primary + const uint8_t interfaces[INTERFACE_COUNT] = {SX126X}; + const bool interface_cfg[INTERFACE_COUNT][3] = { + // SX1262 + { + false, // DEFAULT_SPI + true, // HAS_TCXO + true // DIO2_AS_RF_SWITCH + } + }; + + const int8_t interface_pins[INTERFACE_COUNT][10] = { + // SX1262 + { + 24, // pin_ss + 19, // pin_sclk + 22, // pin_mosi + 23, // pin_miso + 17, // pin_busy + 20, // pin_dio + 25, // pin_reset + -1, // pin_txen + -1, // pin_rxen + 21 // pin_tcxo_enable + } + }; + + const int pin_disp_cs = 30; + const int pin_disp_dc = 28; + const int pin_disp_reset = 2; + const int pin_disp_busy = 3; + const int pin_disp_en = 43; + + const int pin_led_rx = LED_BLUE; + const int pin_led_tx = LED_RED; + #elif BOARD_MODEL == BOARD_RAK4631 || BOARD_MODEL == BOARD_FREENODE #define HAS_EEPROM false #define HAS_DISPLAY true #define DISPLAY EINK_BW @@ -639,7 +739,7 @@ #define HAS_PMU true #define HAS_NP false #define HAS_SD false - #define CONFIG_UART_BUFFER_SIZE 6144 + #define CONFIG_UART_BUFFER_SIZE 40000 #define CONFIG_QUEUE_0_SIZE 6144 #define CONFIG_QUEUE_MAX_LENGTH 200 #define EEPROM_SIZE 296 @@ -678,7 +778,7 @@ #elif BOARD_VARIANT == MODEL_13 || BOARD_VARIANT == MODEL_14 || BOARD_VARIANT == MODEL_21 #define INTERFACE_COUNT 2 - #define CONFIG_QUEUE_1_SIZE 20000 + #define CONFIG_QUEUE_1_SIZE 40000 // first interface in list is the primary const uint8_t interfaces[INTERFACE_COUNT] = {SX126X, SX128X}; @@ -726,17 +826,6 @@ }; #endif - #define INTERFACE_SPI - // Required because on RAK4631, non-default SPI pins must be initialised when class is declared. - const SPIClass interface_spi[1] = { - // SX1262 - SPIClass( - NRF_SPIM2, - interface_pins[0][3], - interface_pins[0][1], - interface_pins[0][2] - ) - }; const int pin_disp_cs = SS; const int pin_disp_dc = WB_IO1; @@ -752,10 +841,4 @@ #endif #endif - #ifndef INTERFACE_SPI - // INTERFACE_SPI is only required on NRF52 platforms, as the SPI pins are set in the class constructor and not by a setter method. - // Even if custom SPI interfaces are not needed, the array must exist to prevent compilation errors. - #define INTERFACE_SPI - const SPIClass interface_spi[1]; - #endif #endif diff --git a/Config.h b/Config.h index aa862ba..9a46878 100644 --- a/Config.h +++ b/Config.h @@ -28,6 +28,8 @@ #define CABLE_STATE_DISCONNECTED 0x00 #define CABLE_STATE_CONNECTED 0x01 uint8_t cable_state = CABLE_STATE_DISCONNECTED; + + #define MAX_INTERFACES 12 #define BT_STATE_NA 0xff #define BT_STATE_OFF 0x00 @@ -78,6 +80,9 @@ bool implicit = false; uint8_t implicit_l = 0; + volatile bool packet_ready = false; + volatile uint8_t packet_interface = 0xFF; + uint8_t op_mode = MODE_HOST; uint8_t model = 0x00; uint8_t hwrev = 0x00; @@ -88,6 +93,12 @@ uint8_t seq = 0xFF; uint16_t read_len = 0; + bool serial_in_frame = false; + + FIFOBuffer packet_rdy_interfaces; + + uint8_t packet_rdy_interfaces_buf[MAX_INTERFACES]; + // Incoming packet buffer uint8_t pbuf[MTU]; diff --git a/Console/Makefile b/Console/Makefile index d3158ae..6fdfc65 100644 --- a/Console/Makefile +++ b/Console/Makefile @@ -14,10 +14,10 @@ dirs: @mkdir -p ./build/images pages: - python ./build.py + python3 ./build.py pages-debug: - python ./build.py --no-gz --no-remap + python3 ./build.py --no-gz --no-remap sourcepack: @echo Packing firmware sources... @@ -44,4 +44,4 @@ site: clean external dirs data sourcepack pages local: clean external dirs data sourcepack pages-debug serve: - python -m http.server 7777 --bind 127.0.0.1 --directory ./build + python3 -m http.server 7777 --bind 127.0.0.1 --directory ./build diff --git a/Device.h b/Device.h index 944479d..e09ba55 100644 --- a/Device.h +++ b/Device.h @@ -259,14 +259,12 @@ void device_validate_partitions() { // todo, add bootloader, partition table, or softdevice? calculate_region_hash(APPLICATION_START, USER_DATA_START, dev_firmware_hash); #endif - #if VALIDATE_FIRMWARE for (uint8_t i = 0; i < DEV_HASH_LEN; i++) { if (dev_firmware_hash_target[i] != dev_firmware_hash[i]) { fw_signature_validated = false; break; } } - #endif } bool device_firmware_ok() { @@ -275,6 +273,7 @@ bool device_firmware_ok() { #if MCU_VARIANT == MCU_ESP32 || MCU_VARIANT == MCU_NRF52 bool device_init() { + #if VALIDATE_FIRMWARE if (bt_ready) { #if MCU_VARIANT == MCU_ESP32 for (uint8_t i=0; i display(DISPLAY_MODEL(pin_disp_cs, pin_disp_dc, pin_disp_reset, pin_disp_busy)); float disp_target_fps = 0.2; +uint32_t last_epd_refresh = 0; +#define REFRESH_PERIOD 300000 // 5 minutes in ms #elif DISPLAY == EINK_3C GxEPD2_3C display(DISPLAY_MODEL(pin_disp_cs, pin_disp_dc, pin_disp_reset, pin_disp_busy)); -float disp_target_fps = 0.05; // refresh usually takes longer on 3C, hence 4x the refresh period +float disp_target_fps = 0.05; // refresh usually takes longer on 3C, hence this is 4x the BW refresh period +uint32_t last_epd_refresh = 0; +#define REFRESH_PERIOD 600000 // 10 minutes in ms #endif #else // add more eink compatible boards here @@ -129,6 +137,7 @@ uint8_t disp_ext_fb = false; unsigned char fb[512]; uint32_t last_disp_update = 0; int disp_update_interval = 1000/disp_target_fps; + uint32_t last_page_flip = 0; uint32_t last_interface_page_flip = 0; int page_interval = 4000; @@ -1111,14 +1120,37 @@ void update_display(bool blank = false) { update_stat_area(); update_disp_area(); display.display(); + + uint32_t current = millis(); + // Invert display to protect against OLED screen burn in + if (screensaver_enabled) { + if (current-last_screensaver >= SCREENSAVER_INTERVAL+SCREENSAVER_TIME) { + display.invertDisplay(0); + last_screensaver = current; + screensaver_enabled = false; + } + } + else if (current-last_screensaver >= SCREENSAVER_INTERVAL) { + display.invertDisplay(1); + screensaver_enabled = true; + } #elif DISP_H == 122 && (DISPLAY == EINK_BW || DISPLAY == EINK_3C) display.setFullWindow(); display.fillScreen(GxEPD_WHITE); update_stat_area(); update_disp_area(); - display.display(true); + + uint32_t current = millis(); + if (current-last_epd_refresh >= REFRESH_PERIOD) { + // Perform a full refresh after the correct time has elapsed + display.display(false); + last_epd_refresh = current; + } else { + // Only perform a partial refresh + display.display(true); + } #endif - last_disp_update = millis(); + last_disp_update = current; } } } diff --git a/Documentation/BUILDING.md b/Documentation/BUILDING.md index e1381b7..d995d31 100644 --- a/Documentation/BUILDING.md +++ b/Documentation/BUILDING.md @@ -1,6 +1,6 @@ # Building ## Prerequisites -The build system of this repository is based on Make. The `Makefile` is in the base of the repository. Please ensure you have `arduino-cli` installed before proceeding. +The build system of this repository is based on GNU Make. The `Makefile` is in the base of the repository. Please ensure you have `arduino-cli`, `python3` and `make` installed before proceeding. Firstly, figure out which MCU platform your supported board is based on. The table below can help you. @@ -54,6 +54,60 @@ Ensure you replace [target] with the target you selected. For example: `make upload-rak4631` +If you are flashing a custom board, you will need to generate a signing key in rnodeconf prior to flashing if you do not already have one by running: + +`rnodeconf -k` + +After flashing a custom board, you will also need to provision the EEPROM before use: + +`rnodeconf /dev/ttyACM0 -r --platform ESP32 --model a9 --product f0 --hwrev 3` + +- platform must either be AVR, ESP32 or NRF52 +- hwrev is required (any integer between 1 and 255) +- model should be something from the list below without the leading `0x` and in lowercase (example `e8`): +``` +0x11: [430000000, 510000000, 22, "430 - 510 MHz", "rnode_firmware_rak4631.zip", "SX1262"], +0x12: [779000000, 928000000, 22, "779 - 928 MHz", "rnode_firmware_rak4631.zip", "SX1262"], +0xA4: [410000000, 525000000, 14, "410 - 525 MHz", "rnode_firmware.hex", "SX1278"], +0xA9: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware.hex", "SX1276"], +0xA1: [410000000, 525000000, 22, "410 - 525 MHz", "rnode_firmware_t3s3.zip", "SX1268"], +0xA6: [820000000, 1020000000, 22, "820 - 960 MHz", "rnode_firmware_t3s3.zip", "SX1262"], +0xA2: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng21.zip", "SX1278"], +0xA7: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware_ng21.zip", "SX1276"], +0xA3: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng20.zip", "SX1278"], +0xA8: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware_ng20.zip", "SX1276"], +0xB3: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v20.zip", "SX1278"], +0xB8: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v20.zip", "SX1276"], +0xB4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v21.zip", "SX1278"], +0xB9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v21.zip", "SX1276"], +0x04: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v21_tcxo.zip", "SX1278"], +0x09: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v21_tcxo.zip", "SX1276"], +0xBA: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v10.zip", "SX1278"], +0xBB: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v10.zip", "SX1276"], +0xC4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_heltec32v2.zip", "SX1278"], +0xC9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_heltec32v2.zip", "SX1276"], +0xC5: [470000000, 510000000, 21, "470 - 510 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"], +0xCA: [863000000, 928000000, 21, "863 - 928 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"], +0xE4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_tbeam.zip", "SX1278"], +0xE9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_tbeam.zip", "SX1276"], +0xE3: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1268"], +0xE8: [850000000, 950000000, 22, "850 - 950 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1262"], +0xFE: [100000000, 1100000000, 17, "(Band capabilities unknown)", None, "Unknown"], +0xFF: [100000000, 1100000000, 14, "(Band capabilities unknown)", None, "Unknown"], +``` +- product should be a code from the following list below without the leading `0x` and in lowercase (example `f0`): +``` +PRODUCT_RAK4631 = 0x10 +PRODUCT_RNODE = 0x03 +PRODUCT_T32_10 = 0xB2 +PRODUCT_T32_20 = 0xB0 +PRODUCT_T32_21 = 0xB1 +PRODUCT_H32_V2 = 0xC0 +PRODUCT_H32_V3 = 0xC1 +PRODUCT_TBEAM = 0xE0 +PRODUCT_HMBRW = 0xF0 +``` + **Please note**, you must re-compile the firmware each time you make changes **before** you flash it, else you will just be flashing the previous version of the firmware without the new changes! These commands can also be run as a one liner. For example: diff --git a/Documentation/CONTRIBUTING.md b/Documentation/CONTRIBUTING.md index 3a8d1ac..459707f 100644 --- a/Documentation/CONTRIBUTING.md +++ b/Documentation/CONTRIBUTING.md @@ -1,47 +1,77 @@ # Board support -If you wish to add support for a specific board to the project, all you have to do (if it's ESP32 or nRF52), is write an additional entry for `Boards.h`. +If you wish to add support for a specific board to the project, all you have to do (if it's ESP32 or nRF52), is write an additional entry for `Boards.h` and `Utilities.h` and the `Makefile` . -This entry should include, at a minimum, the following: +### Boards.h +This entry in `Boards.h` should include, at a minimum, the following: * whether the device has bluetooth / BLE * whether the device has a PMU * whether the device has an EEPROM (false in all cases for nRF52, true for ESP32) * pin mappings for SPI NSS, SCLK, MOSI, MISO, modem reset and dio0 -* the type of modem on the board (if undefined it defaults to SX127x) +* the type of modem on the board +* the number of interfaces (modems) * whether the modem has a busy pin * RX and TX leds (preferably LEDs of different colours) -# Check this area... -see https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-spi.h#L39 -Effectively, there are multiple SPI buses we can map to pins on these -devices (including the hardware SPI bus) - -An example of a minimal entry can be seen below: +You should also define a unique name for your board (with a unique value), for +example: +``` +#define BOARD_MY_WICKED_BOARD 0x3B +``` +**Check your chosen value is not in use** in `Boards.h` first! +The board definition should look as follows: ``` #elif BOARD_MODEL == BOARD_MY_WICKED_BOARD - #define HAS_BLUETOOTH true - #define HAS_PMU true - #define HAS_EEPROM true - #define EEPROM_SIZE 296 // minimum EEPROM size - #define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED - const int pin_cs = 20; - const int pin_reset = 19; - // const int pin_cs = 1; not needed here - // const int pin_sclk = 2; not needed here - // const int pin_mosi = 3; not needed here - // const int pin_miso = 4; not needed here - const int pin_dio = 18; - // const int pin_busy = 0; not present - const int pin_led_rx = 5; - const int pin_led_tx = 6; + #define HAS_BLUETOOTH false + #define HAS_CONSOLE true + #define HAS_EEPROM true + #define INTERFACE_COUNT 1 + const int pin_led_rx = 9; + const int pin_led_tx = 8; + const uint8_t interfaces[INTERFACE_COUNT] = {SX127X}; + const bool interface_cfg[INTERFACE_COUNT][3] = { + // SX127X + { + true, // DEFAULT_SPI + false, // HAS_TCXO + false // DIO2_AS_RF_SWITCH + }, + }; + const int8_t interface_pins[INTERFACE_COUNT][10] = { + // SX127X + { + 7, // pin_ss + 4, // pin_sclk + 6, // pin_mosi + 5, // pin_miso + -1, // pin_busy + 2, // pin_dio + 3, // pin_reset + -1, // pin_txen + -1, // pin_rxen + -1 // pin_tcxo_enable + } + }; + ``` +Note, this will have to be pasted in the section according to the MCU variant, +e.g. nRF52 or ESP32. Find the section by searching for the comparison where +`MCU_VARIANT` is checked for your MCU variant. **Do not change the order of the +pins or options in any of the interface_cfg or interface_pins arrays.** You +have been warned. + +[There are multiple SPI +buses](https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-spi.h#L39) +we can map to pins on these devices (including the hardware SPI bus). + In some cases the SPI pins will not be required, as they will be the default pins for the SPI library supporting the board anyway, and therefore do not need overriding in the config. If the SX1262 is being used the following should also be considered: +* the modem busy pin * whether DIO2 should be used as the RF switch (DIO2_AS_RF_SWITCH) -* whether an rf on/off switch also has to be operated (through the pin pin_rxen) -* whether a TCXO is connected to the modem (HAS_TCXO) -* the enable pin for the TCXO (if present) +* whether an RF on/off switch also has to be operated (through the pin pin_rxen) +* whether a TCXO is connected to the modem (HAS_TCXO and pin_tcxo_enable to enable the TCXO if present) +* whether the SPI pins are the default used by the SPI library An example of an entry using the SX1262 modem can be seen below: ``` @@ -51,22 +81,34 @@ An example of an entry using the SX1262 modem can be seen below: #define HAS_EEPROM true #define EEPROM_SIZE 296 // minimum EEPROM size #define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED - #define MODEM SX1262 - #define DIO2_AS_RF_SWITCH true - #define HAS_TCXO true - #define HAS_BUSY true - const int pin_cs = 20; - const int pin_reset = 19; - const int pin_rxen = 10; - // const int pin_cs = 1; not needed here - // const int pin_sclk = 2; not needed here - // const int pin_mosi = 3; not needed here - // const int pin_miso = 4; not needed here - const int pin_dio = 18; - const int pin_busy = 7; - const int pin_tcxo_enable = -1; const int pin_led_rx = 5; const int pin_led_tx = 6; + #define INTERFACE_COUNT 1 + const uint8_t interfaces[INTERFACE_COUNT] = {SX126X}; + const bool interface_cfg[INTERFACE_COUNT][3] = { + // SX1262 + { + false, // DEFAULT_SPI + true, // HAS_TCXO + true // DIO2_AS_RF_SWITCH + } + }; + const int8_t interface_pins[INTERFACE_COUNT][10] = { + // SX1262 + { + 42, // pin_ss + 43, // pin_sclk + 44, // pin_mosi + 45, // pin_miso + 46, // pin_busy + 47, // pin_dio + 38, // pin_reset + -1, // pin_txen + 37, // pin_rxen + -1 // pin_tcxo_enable + } + }; + ``` If the SX1280 is being used, the following should also be added: @@ -80,24 +122,116 @@ An example of an entry using the SX1280 modem can be seen below: #define HAS_EEPROM true #define EEPROM_SIZE 296 // minimum EEPROM size #define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED - #define MODEM SX1280 - #define HAS_BUSY true - #define HAS_RF_SWITCH_RX_TX true - const int pin_cs = 20; - const int pin_reset = 19; - const int pin_rxen = 10; - const int pin_txen = 11; - // const int pin_cs = 1; not needed here - // const int pin_sclk = 2; not needed here - // const int pin_mosi = 3; not needed here - // const int pin_miso = 4; not needed here - const int pin_dio = 18; - const int pin_busy = 7; - const int pin_tcxo_enable = -1; const int pin_led_rx = 5; const int pin_led_tx = 6; + #define INTERFACE_COUNT 1 + const uint8_t interfaces[INTERFACE_COUNT] = {SX128X}; + const bool interface_cfg[INTERFACE_COUNT][3] = { + // SX1280 + { + true, // DEFAULT_SPI + false,// HAS_TCXO + false // DIO2_AS_RF_SWITCH + } + }; + const int8_t interface_pins[INTERFACE_COUNT][10] = { + // SX1280 + { + 24, // pin_ss + 3, // pin_sclk + 30, // pin_mosi + 29, // pin_miso + 25, // pin_busy + 15, // pin_dio + 16, // pin_reset + 20, // pin_txen + 19, // pin_rxen + -1 // pin_tcxo_enable + } + }; ``` +#### INTERFACE_SPI (nRF52 only) +If you are using non-default SPI pins on an nRF52 MCU variant, you **must** ensure that you add this section to the bottom of your board config: +``` + // Required because on nRF52, non-default SPI pins must be initialised when class is declared. + const SPIClass interface_spi[1] = { + // SX1262 + SPIClass( + NRF_SPIM2, + interface_pins[0][3], + interface_pins[0][1], + interface_pins[0][2] + ) + }; +``` +This will ensure the pins are set correctly in the SPI class. + +### Utilities.h +You should add something similar to the following to drive the LEDs depending on your configuration: +``` +#elif BOARD_MODEL == BOARD_MY_WICKED_BOARD + void led_rx_on() { digitalWrite(pin_led_rx, HIGH); } + void led_rx_off() { digitalWrite(pin_led_rx, LOW); } + void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } + void led_tx_off() { digitalWrite(pin_led_tx, LOW); } +``` +Note: this will again have to be pasted in the correct section according to +your MCU variant. Please search for the other definitions of `led_rx_on()` to +find the correct section, then find the final section by searching for the +comparison where `MCU_VARIANT` is checked for your MCU variant. + +### Makefile +You can add the example target below to the makefile for your board, but **you must replace the FQBN** in the arduino-cli command with the correct one for your board. +``` +firmware-wicked_esp32: + arduino-cli compile --fqbn esp32:esp32:esp32c3:CDCOnBoot=cdc -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\"" +``` +Pay attention the the DBOARD_MODEL= value as you must insert the one you chose earlier here. + +Another entry to upload to the board. Again substitute your FQBN, and you may have to experiment with the commands to get it to flash: +#### ESP32 +``` +upload-wicked_esp32: + arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32c3 + @sleep 1 + rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32c3/RNode_Firmware_CE.ino.bin) + @sleep 3 + python3 ./Release/esptool/esptool.py --chip esp32c3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin +``` +#### nRF52 +``` +upload-wicked_nrf52: + arduino-cli upload -p /dev/ttyACM0 --fqbn rakwireless:nrf52:WisCoreRAK4631Board + unzip -o build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.zip -d build/rakwireless.nrf52.WisCoreRAK4631Board + rnodeconf /dev/ttyACM0 --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.bin | grep -o '^\S*') +``` + +And one final entry to make a release for the firmware: +#### ESP32 +``` +release-wicked_esp32: + arduino-cli compile --fqbn esp32:esp32:esp32c3:CDCOnBoot=cdc -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\"" + cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_wicked_esp32.boot_app0 + cp build/esp32.esp32.esp32c3/RNode_Firmware_CE.ino.bin build/rnode_firmware_wicked_esp32.bin + cp build/esp32.esp32.esp32c3/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_wicked_esp32.bootloader + cp build/esp32.esp32.esp32c3/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_wicked_esp32.partitions + zip --junk-paths ./Release/rnode_firmware_wicked_esp32.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_wicked_esp32.boot_app0 build/rnode_firmware_wicked_esp32.bin build/rnode_firmware_wicked_esp32.bootloader build/rnode_firmware_wicked_esp32.partitions + rm -r build +``` +#### nRF52 +``` +release-wicked_nrf52: + arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\"" + cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_wicked_nrf52.hex + adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_wicked_nrf52.hex Release/rnode_firmware_wicked_nrf52.zip +``` +Don't forget to add this entry to the `release-all` target! +``` +release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 ***release-wicked_esp32*** release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes +``` +You can of course replace the ESP32 target with the nRF52 target, if you are building for that MCU variant, as seen in previous instructions. + Please submit this, and any other support in different areas of the project your board may require, as a PR for my consideration. # Feature request diff --git a/Makefile b/Makefile index ae20fde..9d3594d 100644 --- a/Makefile +++ b/Makefile @@ -22,19 +22,7 @@ VFLAG =-v endif COMMON_BUILD_FLAGS = $(VFLAG) -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" -COMMON_UPLOAD_FlAGS = $(VFLAG) --chip esp32 --port $(SERIAL_DEV) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 - -ifndef SERIAL_DEV - ifneq (,$(wildcard /dev/ttyUSB0)) - SERIAL_DEV = /dev/ttyUSB0 - else ifneq (,$(wildcard /dev/ttyACM0)) - SERIAL_DEV = /dev/ttyACM0 - else ifneq (,$(wildcard /dev/cu.usbserial*)) - SERIAL_DEV = $(wildcard /dev/cu.usbserial*) - else - SERIAL_DEV = unknown - endif -endif +COMMON_ESP_UPLOAD_FlAGS = $(VFLAG) --chip esp32 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 all: release @@ -42,27 +30,27 @@ clean: -rm -rf ./build -rm -f ./Release/rnode_firmware* -prep: prep-esp32 prep-samd +prep: prep-esp32 prep-nrf prep-index: arduino-cli core update-index --config-file arduino-cli.yaml prep-esp32: - arduino-cli core install esp32:esp32@2.0.17 --config-file arduino-cli.yaml + arduino-cli core install esp32:esp32@$(ESP_IDF_VER) --config-file arduino-cli.yaml arduino-cli lib install "Adafruit SSD1306" arduino-cli lib install "XPowersLib" arduino-cli lib install "Crypto" arduino-cli lib install "Adafruit NeoPixel" - -prep-samd: - arduino-cli core install adafruit:samd --config-file arduino-cli.yaml + pip install pyserial rns --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error. prep-nrf: + arduino-cli core install adafruit:nrf52 --config-file arduino-cli.yaml arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml arduino-cli lib install "Crypto" arduino-cli lib install "Adafruit GFX Library" arduino-cli lib install "GxEPD2" - pip install adafruit-nrfutil --upgrade + pip install pyserial rns --upgrade --user --break-system-packages + pip install adafruit-nrfutil --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error. console-site: make -C Console clean site @@ -70,13 +58,13 @@ console-site: spiffs: console-site spiffs-image spiffs-image: - python Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin + python3 Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin upload-spiffs: @echo Deploying SPIFFS image... python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin -all-firmware: $(shell grep ^firmware- Makefile | cut -d: -f1) +firmware: $(shell grep ^firmware- Makefile | cut -d: -f1) firmware-tbeam: arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\"" @@ -84,12 +72,23 @@ firmware-tbeam: firmware-tbeam_sx126x: arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\"" +firmware-techo: firmware-techo4 firmware-techo9 + +firmware-techo4: + arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x16\"" + +firmware-techo9: + arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x17\"" + firmware-t3s3_sx1262: arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\"" firmware-t3s3_sx1280_pa: arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\"" +firmware-e22_esp32: + arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\" \"-DEXTERNAL_LEDS=true\"" + firmware-lora32_v10: arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" @@ -139,92 +138,104 @@ firmware-freenode: arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\"" upload-tbeam: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:t-beam + arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:t-beam @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FLAGS) + +upload-techo: + arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn adafruit:nrf52:pca10056 + unzip -o build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.zip -d build/adafruit.nrf52.pca10056 + rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*') upload-lora32_v10: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) upload-lora32_v20: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) upload-lora32_v21: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS) upload-heltec32_v2: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:heltec_wifi_lora_32_V2 + arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V2 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) upload-heltec32_v3: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:heltec_wifi_lora_32_V3 + arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V3 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py --chip esp32-s3 --port $(SERIAL_DEV) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) upload-rnode_ng_20: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) upload-rnode_ng_21: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:ttgo-lora32 + arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS) upload-t3s3: @echo @echo Put board into flashing mode by holding BOOT button while momentarily pressing the RESET button. Hit enter when done. @read - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:esp32s3 + arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3 @sleep 2 - python ./Release/esptool/esptool.py --chip esp32s3 --port $(SERIAL_DEV) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + python3 ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin @echo @echo Press the RESET button on the board now, and hit enter @read @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin) upload-featheresp32: - arduino-cli upload -p $(SERIAL_DEV) --fqbn esp32:esp32:featheresp32 + arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:featheresp32 @sleep 1 - rnodeconf $(SERIAL_DEV) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin) + rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin) @sleep 3 - python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin + python ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin upload-rak4631: - arduino-cli upload -p $(SERIAL_DEV) --fqbn rakwireless:nrf52:WisCoreRAK4631Board + arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn rakwireless:nrf52:WisCoreRAK4631Board unzip -o build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.zip -d build/rakwireless.nrf52.WisCoreRAK4631Board - rnodeconf $(SERIAL_DEV) --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.bin | grep -o '^\S*') + rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.bin | grep -o '^\S*') + +upload-e22_esp32: + arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:esp32 + @sleep 1 + rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin) + @sleep 3 + python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) release: release-all -release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes +release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-e22_esp32 release-hashes release-hashes: - python ./release_hashes.py > ./Release/release.json + python3 ./release_hashes.py > ./Release/release.json release-tbeam: arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\"" @@ -361,6 +372,15 @@ release-t3s3: zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions rm -r build +release-e22_esp32: + arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\"" + cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_e22.boot_app0 + cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_e22.bin + cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_e22.bootloader + cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_esp32_e22.partitions + zip --junk-paths ./Release/rnode_firmware_esp32_e22.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_e22.boot_app0 build/rnode_firmware_esp32_e22.bin build/rnode_firmware_esp32_e22.bootloader build/rnode_firmware_esp32_e22.partitions + rm -r build + release-featheresp32: arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\"" cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0 diff --git a/Power.h b/Power.h index 395f629..56bcf16 100644 --- a/Power.h +++ b/Power.h @@ -273,6 +273,16 @@ void measure_battery() { if (battery_percent >= 98) { battery_state = BATTERY_STATE_CHARGED; } + + #if HAS_BLE + if ((bt_state == BT_STATE_ON) || bt_state == BT_STATE_CONNECTED) { + if (battery_state != BATTERY_STATE_CHARGING) { + blebas.write(battery_percent); + } else { + blebas.write(100); + } + } + #endif #endif if (battery_ready) { @@ -421,7 +431,7 @@ bool init_pmu() { PMU->setPowerKeyPressOffTime(XPOWERS_POWEROFF_4S); return true; - #elif BOARD_MODEL == BOARD_RAK4631 + #elif BOARD_MODEL == BOARD_RAK4631 || BOARD_MODEL == BOARD_FREENODE // board doesn't have PMU but we can measure batt voltage // prep ADC for reading battery level diff --git a/README.md b/README.md index 9935a0e..e5016ba 100644 --- a/README.md +++ b/README.md @@ -58,7 +58,7 @@ The RNode Firmware supports all transceiver modules based on the following chips * Semtech SX1278 * Semtech SX1280 -These also must have an **SPI interface** and **DIO_0** pin connected to the MCU directly. +These also must have an **SPI interface** and **DIO_0 (sometimes called DIO_1)** pin connected to the MCU directly. ## One Tool, Many Uses diff --git a/RNode_Firmware_CE.ino b/RNode_Firmware_CE.ino index c91ac31..a82e70e 100644 --- a/RNode_Firmware_CE.ino +++ b/RNode_Firmware_CE.ino @@ -17,10 +17,37 @@ #include #include "Utilities.h" -#if BOARD_MODEL == BOARD_HELTEC32_V3 -// Default stack size for loop function on Heltec32 V3 is not large enough, -// must be increased to 11kb to prevent crashes. -SET_LOOP_TASK_STACK_SIZE(11 * 1024); // 11KB +#if MCU_VARIANT == MCU_NRF52 + #define INTERFACE_SPI + #if BOARD_MODEL == BOARD_RAK4631 + // Required because on RAK4631, non-default SPI pins must be initialised when class is declared. + SPIClass interface_spi[1] = { + // SX1262 + SPIClass( + NRF_SPIM2, + interface_pins[0][3], + interface_pins[0][1], + interface_pins[0][2] + ) + }; + #elif BOARD_MODEL == BOARD_TECHO + SPIClass interface_spi[1] = { + // SX1262 + SPIClass( + NRF_SPIM3, + interface_pins[0][3], + interface_pins[0][1], + interface_pins[0][2] + ) + }; + #endif +#endif + +#ifndef INTERFACE_SPI +// INTERFACE_SPI is only required on NRF52 platforms, as the SPI pins are set in the class constructor and not by a setter method. +// Even if custom SPI interfaces are not needed, the array must exist to prevent compilation errors. +#define INTERFACE_SPI +SPIClass interface_spi[1]; #endif FIFOBuffer serialFIFO; @@ -49,11 +76,6 @@ volatile bool serial_buffering = false; char sbuf[128]; -bool packet_ready = false; - -volatile bool process_packet = false; -volatile uint8_t packet_interface = 0; - uint8_t *packet_queue[INTERFACE_COUNT]; void setup() { @@ -120,11 +142,15 @@ void setup() { memset(packet_lengths_buf, 0, sizeof(packet_starts_buf)); for (int i = 0; i < INTERFACE_COUNT; i++) { - fifo16_init(&packet_starts[i], packet_starts_buf, CONFIG_QUEUE_MAX_LENGTH); - fifo16_init(&packet_lengths[i], packet_lengths_buf, CONFIG_QUEUE_MAX_LENGTH); - packet_queue[i] = (uint8_t*)malloc(getQueueSize(i)); + fifo16_init(&packet_starts[i], packet_starts_buf, CONFIG_QUEUE_MAX_LENGTH+1); + fifo16_init(&packet_lengths[i], packet_lengths_buf, CONFIG_QUEUE_MAX_LENGTH+1); + packet_queue[i] = (uint8_t*)malloc(getQueueSize(i)+1); } + memset(packet_rdy_interfaces_buf, 0, sizeof(packet_rdy_interfaces_buf)); + + fifo_init(&packet_rdy_interfaces, packet_rdy_interfaces_buf, MAX_INTERFACES); + // Create and configure interface objects for (uint8_t i = 0; i < INTERFACE_COUNT; i++) { switch (interfaces[i]) { @@ -134,13 +160,13 @@ void setup() { sx126x* obj; // if default spi enabled if (interface_cfg[i][0]) { - obj = new sx126x(i, SPI, interface_cfg[i][1], + obj = new sx126x(i, &SPI, interface_cfg[i][1], interface_cfg[i][2], interface_pins[i][0], interface_pins[i][1], interface_pins[i][2], interface_pins[i][3], interface_pins[i][6], interface_pins[i][5], interface_pins[i][4], interface_pins[i][8]); } else { - obj = new sx126x(i, interface_spi[i], interface_cfg[i][1], + obj = new sx126x(i, &interface_spi[i], interface_cfg[i][1], interface_cfg[i][2], interface_pins[i][0], interface_pins[i][1], interface_pins[i][2], interface_pins[i][3], interface_pins[i][6], interface_pins[i][5], interface_pins[i][4], interface_pins[i][8]); @@ -157,12 +183,12 @@ void setup() { sx127x* obj; // if default spi enabled if (interface_cfg[i][0]) { - obj = new sx127x(i, SPI, interface_pins[i][0], + obj = new sx127x(i, &SPI, interface_pins[i][0], interface_pins[i][1], interface_pins[i][2], interface_pins[i][3], interface_pins[i][6], interface_pins[i][5], interface_pins[i][4]); } else { - obj = new sx127x(i, interface_spi[i], interface_pins[i][0], + obj = new sx127x(i, &interface_spi[i], interface_pins[i][0], interface_pins[i][1], interface_pins[i][2], interface_pins[i][3], interface_pins[i][6], interface_pins[i][5], interface_pins[i][4]); } @@ -177,13 +203,13 @@ void setup() { sx128x* obj; // if default spi enabled if (interface_cfg[i][0]) { - obj = new sx128x(i, SPI, interface_cfg[i][1], + obj = new sx128x(i, &SPI, interface_cfg[i][1], interface_pins[i][0], interface_pins[i][1], interface_pins[i][2], interface_pins[i][3], interface_pins[i][6], interface_pins[i][5], interface_pins[i][4], interface_pins[i][8], interface_pins[i][7]); } else { - obj = new sx128x(i, interface_spi[i], interface_cfg[i][1], + obj = new sx128x(i, &interface_spi[i], interface_cfg[i][1], interface_pins[i][0], interface_pins[i][1], interface_pins[i][2], interface_pins[i][3], interface_pins[i][6], interface_pins[i][5], interface_pins[i][4], interface_pins[i][8], interface_pins[i][7]); @@ -315,18 +341,18 @@ inline void getPacketData(RadioInterface* radio, uint16_t len) { } } -void ISR_VECT receive_callback(uint8_t index, int packet_size) { +void receive_callback(uint8_t index, int packet_size) { + selected_radio = interface_obj[index]; + bool ready = false; if (!promisc) { - selected_radio = interface_obj[index]; - // The standard operating mode allows large // packets with a payload up to 500 bytes, // by combining two raw LoRa packets. // We read the 1-byte header and extract // packet sequence number and split flags + uint8_t header = selected_radio->read(); packet_size--; uint8_t sequence = packetSequence(header); - bool ready = false; if (isSplitPacket(header) && seq == SEQ_UNSET) { // This is the first part of a split @@ -345,7 +371,8 @@ void ISR_VECT receive_callback(uint8_t index, int packet_size) { getPacketData(selected_radio, packet_size); seq = SEQ_UNSET; - ready = true; + packet_interface = index; + packet_ready = true; } else if (isSplitPacket(header) && seq != sequence) { // This split packet does not carry the @@ -370,20 +397,21 @@ void ISR_VECT receive_callback(uint8_t index, int packet_size) { } getPacketData(selected_radio, packet_size); - ready = true; - } - if (ready) { - packet_ready = true; - } + packet_interface = index; + packet_ready = true; + } } else { // In promiscuous mode, raw packets are // output directly to the host read_len = 0; getPacketData(selected_radio, packet_size); + + packet_interface = index; packet_ready = true; } + last_rx = millis(); } @@ -436,6 +464,7 @@ bool startRadio(RadioInterface* radio) { void stopRadio(RadioInterface* radio) { radio->end(); sort_interfaces(); + kiss_indicate_radiostate(radio); } void update_radio_lock(RadioInterface* radio) { @@ -570,9 +599,9 @@ void serialCallback(uint8_t sbyte) { if (getInterfaceIndex(command) < INTERFACE_COUNT) { uint8_t index = getInterfaceIndex(command); - if (!fifo16_isfull(&packet_starts[index]) && queued_bytes[index] < (getQueueSize(index))) { + if (!fifo16_isfull(&packet_starts[index]) && (queued_bytes[index] < (getQueueSize(index)))) { uint16_t s = current_packet_start[index]; - int16_t e = queue_cursor[index]-1; if (e == -1) e = (getQueueSize(index))-1; + int32_t e = queue_cursor[index]-1; if (e == -1) e = (getQueueSize(index))-1; uint16_t l; if (s != e) { @@ -697,8 +726,8 @@ void serialCallback(uint8_t sbyte) { if (op_mode == MODE_HOST) selected_radio->setSignalBandwidth(bw); selected_radio->updateBitrate(); sort_interfaces(); - kiss_indicate_phy_stats(selected_radio); kiss_indicate_bandwidth(selected_radio); + kiss_indicate_phy_stats(selected_radio); } interface = 0; } @@ -727,8 +756,8 @@ void serialCallback(uint8_t sbyte) { if (op_mode == MODE_HOST) selected_radio->setSpreadingFactor(sf); selected_radio->updateBitrate(); sort_interfaces(); - kiss_indicate_phy_stats(selected_radio); kiss_indicate_spreadingfactor(selected_radio); + kiss_indicate_phy_stats(selected_radio); } interface = 0; } else if (command == CMD_CR) { @@ -743,8 +772,8 @@ void serialCallback(uint8_t sbyte) { if (op_mode == MODE_HOST) selected_radio->setCodingRate4(cr); selected_radio->updateBitrate(); sort_interfaces(); - kiss_indicate_phy_stats(selected_radio); kiss_indicate_codingrate(selected_radio); + kiss_indicate_phy_stats(selected_radio); } interface = 0; } else if (command == CMD_IMPLICIT) { @@ -765,10 +794,8 @@ void serialCallback(uint8_t sbyte) { kiss_indicate_radiostate(selected_radio); } else if (sbyte == 0x00) { stopRadio(selected_radio); - kiss_indicate_radiostate(selected_radio); } else if (sbyte == 0x01) { startRadio(selected_radio); - kiss_indicate_radiostate(selected_radio); } interface = 0; } else if (command == CMD_ST_ALOCK) { @@ -1086,11 +1113,11 @@ void validate_status() { if (eeprom_checksum_valid()) { eeprom_ok = true; if (modems_installed) { - if (device_init()) { - hw_ready = true; - } else { - hw_ready = false; - } + if (device_init()) { + hw_ready = true; + } else { + hw_ready = false; + } } else { hw_ready = false; Serial.write("No valid radio module found\r\n"); @@ -1142,22 +1169,7 @@ void validate_status() { } void loop() { - packet_poll(); - - bool ready = false; - for (int i = 0; i < INTERFACE_COUNT; i++) { - selected_radio = interface_obj[i]; - if (selected_radio->getRadioOnline()) { - selected_radio->checkModemStatus(); - ready = true; - } - } - - - // If at least one radio is online then we can continue - if (ready) { - if (packet_ready) { - selected_radio = interface_obj[packet_interface]; + if (packet_ready) { #if MCU_VARIANT == MCU_ESP32 portENTER_CRITICAL(&update_lock); #elif MCU_VARIANT == MCU_NRF52 @@ -1173,8 +1185,20 @@ void loop() { kiss_indicate_stat_rssi(); kiss_indicate_stat_snr(); kiss_write_packet(packet_interface); - } - + } + + bool ready = false; + for (int i = 0; i < INTERFACE_COUNT; i++) { + selected_radio = interface_obj[i]; + if (selected_radio->getRadioOnline()) { + selected_radio->checkModemStatus(); + ready = true; + } + } + + + // If at least one radio is online then we can continue + if (ready) { for (int i = 0; i < INTERFACE_COUNT; i++) { selected_radio = interface_obj_sorted[i]; @@ -1187,7 +1211,7 @@ void loop() { // loop, it still needs to be the first to transmit, so check if this // is the case. for (int j = 0; j < INTERFACE_COUNT; j++) { - if (!interface_obj_sorted[j]->calculateALock() || interface_obj_sorted[j]->getRadioOnline()) { + if (!interface_obj_sorted[j]->calculateALock() && interface_obj_sorted[j]->getRadioOnline()) { if (interface_obj_sorted[j]->getBitrate() > selected_radio->getBitrate()) { if (queue_height[interface_obj_sorted[j]->getIndex()] > 0) { selected_radio = interface_obj_sorted[j]; @@ -1197,7 +1221,7 @@ void loop() { } if (queue_height[selected_radio->getIndex()] > 0) { - long check_time = millis(); + uint32_t check_time = millis(); if (check_time > selected_radio->getPostTxYieldTimeout()) { if (selected_radio->getDCDWaiting() && (check_time >= selected_radio->getDCDWaitUntil())) { selected_radio->setDCDWaiting(false); } if (!selected_radio->getDCDWaiting()) { @@ -1306,26 +1330,6 @@ void poll_buffers() { process_serial(); } -void packet_poll() { - #if MCU_VARIANT == MCU_ESP32 - portENTER_CRITICAL(&update_lock); - #elif MCU_VARIANT == MCU_NRF52 - portENTER_CRITICAL(); - #endif - // If we have received a packet on an interface which needs to be processed - if (process_packet) { - selected_radio = interface_obj[packet_interface]; - selected_radio->clearIRQStatus(); - selected_radio->handleDio0Rise(); - process_packet = false; - } - #if MCU_VARIANT == MCU_ESP32 - portEXIT_CRITICAL(&update_lock); - #elif MCU_VARIANT == MCU_NRF52 - portEXIT_CRITICAL(); - #endif -} - volatile bool serial_polling = false; void serial_poll() { serial_polling = true; diff --git a/ROM.h b/ROM.h index 323449d..4ecd02a 100644 --- a/ROM.h +++ b/ROM.h @@ -32,6 +32,9 @@ #define MODEL_12 0x12 #define MODEL_13 0x13 // RAK4631 LF with WisBlock SX1280 module (LIBSYS002) #define MODEL_14 0x14 // RAK4631 HF with WisBlock SX1280 module (LIBSYS002) + #define PRODUCT_TECHO 0x15 + #define MODEL_16 0x16 // T-Echo 433 + #define MODEL_17 0x17 // T-Echo 915 #define MODEL_21 0x21 // European band, 868MHz #define MODEL_A1 0xA1 #define MODEL_A5 0xA5 // T3S3 SX1280 PA diff --git a/Radio.cpp b/Radio.cpp index 585cceb..fe45ceb 100644 --- a/Radio.cpp +++ b/Radio.cpp @@ -4,7 +4,7 @@ // Modifications and additions copyright 2024 by Mark Qvist & Jacob Eva // Obviously still under the MIT license. -#include "Radio.h" +#include "Radio.hpp" #if PLATFORM == PLATFORM_ESP32 #if defined(ESP32) and !defined(CONFIG_IDF_TARGET_ESP32S3) @@ -88,8 +88,7 @@ #define FREQ_DIV_6X (double)pow(2.0, 25.0) #define FREQ_STEP_6X (double)(XTAL_FREQ_6X / FREQ_DIV_6X) -extern bool process_packet; -extern uint8_t packet_interface; +extern FIFOBuffer packet_rdy_interfaces; extern RadioInterface* interface_obj[]; // ISRs cannot provide parameters to the functions they call. Since we have @@ -97,16 +96,26 @@ extern RadioInterface* interface_obj[]; // which one is high. We can then use the index of this pin in the 2D array to // signal the correct interface to the main loop void ISR_VECT onDio0Rise() { + BaseType_t int_status = taskENTER_CRITICAL_FROM_ISR(); for (int i = 0; i < INTERFACE_COUNT; i++) { if (digitalRead(interface_pins[i][5]) == HIGH) { - process_packet = true; - packet_interface = i; - break; + if (interface_obj[i]->getPacketValidity()) { + interface_obj[i]->handleDio0Rise(); + } + if (interfaces[i] == SX128X) { + // On the SX1280, there is a bug which can cause the busy line + // to remain high if a high amount of packets are received when + // in continuous RX mode. This is documented as Errata 16.1 in + // the SX1280 datasheet v3.2 (page 149) + // Therefore, the modem is set into receive mode each time a packet is received. + interface_obj[i]->receive(); + } } } + taskEXIT_CRITICAL_FROM_ISR(int_status); } -sx126x::sx126x(uint8_t index, SPIClass spi, bool tcxo, bool dio2_as_rf_switch, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy, int rxen) : +sx126x::sx126x(uint8_t index, SPIClass* spi, bool tcxo, bool dio2_as_rf_switch, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy, int rxen) : RadioInterface(index), _spiSettings(8E6, MSBFIRST, SPI_MODE0), _spiModem(spi), _ss(ss), _sclk(sclk), _mosi(mosi), _miso(miso), _reset(reset), _dio0(dio0), @@ -130,12 +139,12 @@ bool sx126x::preInit() { // todo: check if this change causes issues on any platforms #if MCU_VARIANT == MCU_ESP32 if (_sclk != -1 && _miso != -1 && _mosi != -1 && _ss != -1) { - _spiModem.begin(_sclk, _miso, _mosi, _ss); + _spiModem->begin(_sclk, _miso, _mosi, _ss); } else { - _spiModem.begin(); + _spiModem->begin(); } #else - _spiModem.begin(); + _spiModem->begin(); #endif // check version (retry for up to 2 seconds) @@ -177,15 +186,15 @@ uint8_t ISR_VECT sx126x::singleTransfer(uint8_t opcode, uint16_t address, uint8_ digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(opcode); - _spiModem.transfer((address & 0xFF00) >> 8); - _spiModem.transfer(address & 0x00FF); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(opcode); + _spiModem->transfer((address & 0xFF00) >> 8); + _spiModem->transfer(address & 0x00FF); if (opcode == OP_READ_REGISTER_6X) { - _spiModem.transfer(0x00); + _spiModem->transfer(0x00); } - response = _spiModem.transfer(value); - _spiModem.endTransaction(); + response = _spiModem->transfer(value); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); @@ -222,15 +231,15 @@ void sx126x::executeOpcode(uint8_t opcode, uint8_t *buffer, uint8_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(opcode); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(opcode); for (int i = 0; i < size; i++) { - _spiModem.transfer(buffer[i]); + _spiModem->transfer(buffer[i]); } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -241,16 +250,16 @@ void sx126x::executeOpcodeRead(uint8_t opcode, uint8_t *buffer, uint8_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(opcode); - _spiModem.transfer(0x00); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(opcode); + _spiModem->transfer(0x00); for (int i = 0; i < size; i++) { - buffer[i] = _spiModem.transfer(0x00); + buffer[i] = _spiModem->transfer(0x00); } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -261,17 +270,17 @@ void sx126x::writeBuffer(const uint8_t* buffer, size_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(OP_FIFO_WRITE_6X); - _spiModem.transfer(_fifo_tx_addr_ptr); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(OP_FIFO_WRITE_6X); + _spiModem->transfer(_fifo_tx_addr_ptr); for (int i = 0; i < size; i++) { - _spiModem.transfer(buffer[i]); + _spiModem->transfer(buffer[i]); _fifo_tx_addr_ptr++; } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -282,17 +291,17 @@ void sx126x::readBuffer(uint8_t* buffer, size_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(OP_FIFO_READ_6X); - _spiModem.transfer(_fifo_rx_addr_ptr); - _spiModem.transfer(0x00); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(OP_FIFO_READ_6X); + _spiModem->transfer(_fifo_rx_addr_ptr); + _spiModem->transfer(0x00); for (int i = 0; i < size; i++) { - buffer[i] = _spiModem.transfer(0x00); + buffer[i] = _spiModem->transfer(0x00); } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -451,7 +460,7 @@ void sx126x::end() sleep(); // stop SPI - _spiModem.end(); + _spiModem->end(); _bitrate = 0; @@ -676,7 +685,7 @@ void sx126x::onReceive(void(*callback)(uint8_t, int)) executeOpcode(OP_SET_IRQ_FLAGS_6X, buf, 8); #ifdef SPI_HAS_NOTUSINGINTERRUPT - _spiModem.usingInterrupt(digitalPinToInterrupt(_dio0)); + _spiModem->usingInterrupt(digitalPinToInterrupt(_dio0)); #endif // make function available extern void onDio0Rise(); @@ -685,7 +694,7 @@ void sx126x::onReceive(void(*callback)(uint8_t, int)) } else { detachInterrupt(digitalPinToInterrupt(_dio0)); #ifdef SPI_HAS_NOTUSINGINTERRUPT - _spiModem.notUsingInterrupt(digitalPinToInterrupt(_dio0)); + _spiModem->notUsingInterrupt(digitalPinToInterrupt(_dio0)); #endif } } @@ -735,6 +744,8 @@ void sx126x::enableTCXO() { uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF}; #elif BOARD_MODEL == BOARD_TBEAM uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF}; + #elif BOARD_MODEL == BOARD_TECHO + uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF}; #elif BOARD_MODEL == BOARD_T3S3 uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF}; #else @@ -965,33 +976,17 @@ void sx126x::implicitHeaderMode() void sx126x::handleDio0Rise() { - uint8_t buf[2]; + // received a packet + _packetIndex = 0; - buf[0] = 0x00; - buf[1] = 0x00; + // read packet length + uint8_t rxbuf[2] = {0}; + executeOpcodeRead(OP_RX_BUFFER_STATUS_6X, rxbuf, 2); + int packetLength = rxbuf[0]; - executeOpcodeRead(OP_GET_IRQ_STATUS_6X, buf, 2); - - executeOpcode(OP_CLEAR_IRQ_STATUS_6X, buf, 2); - - if ((buf[1] & IRQ_PAYLOAD_CRC_ERROR_MASK_6X) == 0) { - // received a packet - _packetIndex = 0; - - // read packet length - uint8_t rxbuf[2] = {0}; - executeOpcodeRead(OP_RX_BUFFER_STATUS_6X, rxbuf, 2); - int packetLength = rxbuf[0]; - - if (_onReceive) { - _onReceive(_index, packetLength); - } + if (_onReceive) { + _onReceive(_index, packetLength); } - // else { - // Serial.println("CRCE"); - // Serial.println(buf[0]); - // Serial.println(buf[1]); - // } } void sx126x::updateBitrate() { @@ -1014,7 +1009,7 @@ void sx126x::updateBitrate() { } } -void sx126x::clearIRQStatus() { +bool ISR_VECT sx126x::getPacketValidity() { uint8_t buf[2]; buf[0] = 0x00; @@ -1023,6 +1018,12 @@ void sx126x::clearIRQStatus() { executeOpcodeRead(OP_GET_IRQ_STATUS_6X, buf, 2); executeOpcode(OP_CLEAR_IRQ_STATUS_6X, buf, 2); + + if ((buf[1] & IRQ_PAYLOAD_CRC_ERROR_MASK_6X) == 0) { + return true; + } else { + return false; + } } // SX127x registers #define REG_FIFO_7X 0x00 @@ -1081,7 +1082,7 @@ void sx126x::clearIRQStatus() { #define SYNC_WORD_7X 0x12 -sx127x::sx127x(uint8_t index, SPIClass spi, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy) : +sx127x::sx127x(uint8_t index, SPIClass* spi, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy) : RadioInterface(index), _spiSettings(8E6, MSBFIRST, SPI_MODE0), _spiModem(spi), @@ -1116,12 +1117,12 @@ bool sx127x::preInit() { // todo: check if this change causes issues on any platforms #if MCU_VARIANT == MCU_ESP32 if (_sclk != -1 && _miso != -1 && _mosi != -1 && _ss != -1) { - _spiModem.begin(_sclk, _miso, _mosi, _ss); + _spiModem->begin(_sclk, _miso, _mosi, _ss); } else { - _spiModem.begin(); + _spiModem->begin(); } #else - _spiModem.begin(); + _spiModem->begin(); #endif // Check modem version @@ -1143,10 +1144,10 @@ uint8_t ISR_VECT sx127x::singleTransfer(uint8_t address, uint8_t value) { uint8_t response; digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(address); - response = _spiModem.transfer(value); - _spiModem.endTransaction(); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(address); + response = _spiModem->transfer(value); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); return response; @@ -1193,7 +1194,7 @@ int sx127x::begin() { void sx127x::end() { sleep(); - _spiModem.end(); + _spiModem->end(); _bitrate = 0; _radio_online = false; _preinit_done = false; @@ -1331,7 +1332,7 @@ void sx127x::onReceive(void(*callback)(uint8_t, int)) { writeRegister(REG_DIO_MAPPING_1_7X, 0x00); #ifdef SPI_HAS_NOTUSINGINTERRUPT - _spiModem.usingInterrupt(digitalPinToInterrupt(_dio0)); + _spiModem->usingInterrupt(digitalPinToInterrupt(_dio0)); #endif // make function available @@ -1343,7 +1344,7 @@ void sx127x::onReceive(void(*callback)(uint8_t, int)) { detachInterrupt(digitalPinToInterrupt(_dio0)); #ifdef SPI_HAS_NOTUSINGINTERRUPT - _spiModem.notUsingInterrupt(digitalPinToInterrupt(_dio0)); + _spiModem->notUsingInterrupt(digitalPinToInterrupt(_dio0)); #endif } } @@ -1515,11 +1516,6 @@ void sx127x::optimizeModemSensitivity() { } void sx127x::handleDio0Rise() { - int irqFlags = readRegister(REG_IRQ_FLAGS_7X); - - // Clear IRQs - writeRegister(REG_IRQ_FLAGS_7X, irqFlags); - if ((irqFlags & IRQ_PAYLOAD_CRC_ERROR_MASK_7X) == 0) { _packetIndex = 0; int packetLength = _implicitHeaderMode ? readRegister(REG_PAYLOAD_LENGTH_7X) : readRegister(REG_RX_NB_BYTES_7X); writeRegister(REG_FIFO_ADDR_PTR_7X, readRegister(REG_FIFO_RX_CURRENT_ADDR_7X)); @@ -1527,7 +1523,6 @@ void sx127x::handleDio0Rise() { _onReceive(_index, packetLength); } writeRegister(REG_FIFO_ADDR_PTR_7X, 0); - } } void sx127x::updateBitrate() { @@ -1549,11 +1544,17 @@ void sx127x::updateBitrate() { } } -void sx127x::clearIRQStatus() { +bool ISR_VECT sx127x::getPacketValidity() { int irqFlags = readRegister(REG_IRQ_FLAGS_7X); // Clear IRQs writeRegister(REG_IRQ_FLAGS_7X, irqFlags); + + if ((irqFlags & IRQ_PAYLOAD_CRC_ERROR_MASK_7X) == 0) { + return true; + } else { + return false; + } } // SX128x registers @@ -1599,7 +1600,7 @@ void sx127x::clearIRQStatus() { #define FREQ_DIV_8X (double)pow(2.0, 18.0) #define FREQ_STEP_8X (double)(XTAL_FREQ_8X / FREQ_DIV_8X) -sx128x::sx128x(uint8_t index, SPIClass spi, bool tcxo, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy, int rxen, int txen) : +sx128x::sx128x(uint8_t index, SPIClass* spi, bool tcxo, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy, int rxen, int txen) : RadioInterface(index), _spiSettings(8E6, MSBFIRST, SPI_MODE0), _spiModem(spi), @@ -1626,12 +1627,12 @@ bool sx128x::preInit() { // todo: check if this change causes issues on any platforms #if MCU_VARIANT == MCU_ESP32 if (_sclk != -1 && _miso != -1 && _mosi != -1 && _ss != -1) { - _spiModem.begin(_sclk, _miso, _mosi, _ss); + _spiModem->begin(_sclk, _miso, _mosi, _ss); } else { - _spiModem.begin(); + _spiModem->begin(); } #else - _spiModem.begin(); + _spiModem->begin(); #endif // check version (retry for up to 2 seconds) @@ -1676,15 +1677,15 @@ uint8_t ISR_VECT sx128x::singleTransfer(uint8_t opcode, uint16_t address, uint8_ digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(opcode); - _spiModem.transfer((address & 0xFF00) >> 8); - _spiModem.transfer(address & 0x00FF); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(opcode); + _spiModem->transfer((address & 0xFF00) >> 8); + _spiModem->transfer(address & 0x00FF); if (opcode == OP_READ_REGISTER_8X) { - _spiModem.transfer(0x00); + _spiModem->transfer(0x00); } - response = _spiModem.transfer(value); - _spiModem.endTransaction(); + response = _spiModem->transfer(value); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); @@ -1734,15 +1735,15 @@ void sx128x::executeOpcode(uint8_t opcode, uint8_t *buffer, uint8_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(opcode); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(opcode); for (int i = 0; i < size; i++) { - _spiModem.transfer(buffer[i]); + _spiModem->transfer(buffer[i]); } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -1753,16 +1754,16 @@ void sx128x::executeOpcodeRead(uint8_t opcode, uint8_t *buffer, uint8_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(opcode); - _spiModem.transfer(0x00); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(opcode); + _spiModem->transfer(0x00); for (int i = 0; i < size; i++) { - buffer[i] = _spiModem.transfer(0x00); + buffer[i] = _spiModem->transfer(0x00); } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -1773,17 +1774,17 @@ void sx128x::writeBuffer(const uint8_t* buffer, size_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(OP_FIFO_WRITE_8X); - _spiModem.transfer(_fifo_tx_addr_ptr); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(OP_FIFO_WRITE_8X); + _spiModem->transfer(_fifo_tx_addr_ptr); for (int i = 0; i < size; i++) { - _spiModem.transfer(buffer[i]); + _spiModem->transfer(buffer[i]); _fifo_tx_addr_ptr++; } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -1794,17 +1795,17 @@ void sx128x::readBuffer(uint8_t* buffer, size_t size) digitalWrite(_ss, LOW); - _spiModem.beginTransaction(_spiSettings); - _spiModem.transfer(OP_FIFO_READ_8X); - _spiModem.transfer(_fifo_rx_addr_ptr); - _spiModem.transfer(0x00); + _spiModem->beginTransaction(_spiSettings); + _spiModem->transfer(OP_FIFO_READ_8X); + _spiModem->transfer(_fifo_rx_addr_ptr); + _spiModem->transfer(0x00); for (int i = 0; i < size; i++) { - buffer[i] = _spiModem.transfer(0x00); + buffer[i] = _spiModem->transfer(0x00); } - _spiModem.endTransaction(); + _spiModem->endTransaction(); digitalWrite(_ss, HIGH); } @@ -1921,7 +1922,7 @@ void sx128x::end() sleep(); // stop SPI - _spiModem.end(); + _spiModem->end(); _bitrate = 0; @@ -2043,7 +2044,7 @@ uint8_t ISR_VECT sx128x::packetSnrRaw() { float ISR_VECT sx128x::packetSnr() { uint8_t buf[5] = {0}; - executeOpcodeRead(OP_PACKET_STATUS_8X, buf, 3); + executeOpcodeRead(OP_PACKET_STATUS_8X, buf, 5); return float(buf[1]) * 0.25; } @@ -2079,13 +2080,34 @@ int ISR_VECT sx128x::available() int ISR_VECT sx128x::read() { - if (!available()) { - return -1; - } + if (!available()) { + return -1; + } - uint8_t byte = _packet[_packetIndex]; - _packetIndex++; - return byte; + // if received new packet + if (_packetIndex == 0) { + uint8_t rxbuf[2] = {0}; + executeOpcodeRead(OP_RX_BUFFER_STATUS_8X, rxbuf, 2); + int size; + // If implicit header mode is enabled, read packet length as payload length instead. + // See SX1280 datasheet v3.2, page 92 + if (_implicitHeaderMode == 0x80) { + size = _payloadLength; + } else { + size = rxbuf[0]; + } + _fifo_rx_addr_ptr = rxbuf[1]; + + if (size > 255) { + size = 255; + } + + readBuffer(_packet, size); + } + + uint8_t byte = _packet[_packetIndex]; + _packetIndex++; + return byte; } int sx128x::peek() @@ -2116,9 +2138,16 @@ void sx128x::onReceive(void(*callback)(uint8_t, int)) buf[0] = 0xFF; buf[1] = 0xFF; + // On the SX1280, no RxDone IRQ is generated if a packet is received with + // an invalid header, but the modem will be taken out of single RX mode. + // This can cause the modem to not receive packets until it is reset + // again. This is documented as Errata 16.2 in the SX1280 datasheet v3.2 + // (page 150) Below, the header error IRQ is mapped to dio0 so that the + // modem can be set into RX mode again on reception of a corrupted + // header. // set dio0 masks buf[2] = 0x00; - buf[3] = IRQ_RX_DONE_MASK_8X; + buf[3] = IRQ_RX_DONE_MASK_8X | IRQ_HEADER_ERROR_MASK_8X; // set dio1 masks buf[4] = 0x00; @@ -2129,9 +2158,9 @@ void sx128x::onReceive(void(*callback)(uint8_t, int)) buf[7] = 0x00; executeOpcode(OP_SET_IRQ_FLAGS_8X, buf, 8); -//#ifdef SPI_HAS_NOTUSINGINTERRUPT -// _spiModem.usingInterrupt(digitalPinToInterrupt(_dio0)); -//#endif +#ifdef SPI_HAS_NOTUSINGINTERRUPT + _spiModem->usingInterrupt(digitalPinToInterrupt(_dio0)); +#endif // make function available extern void onDio0Rise(); @@ -2139,9 +2168,9 @@ void sx128x::onReceive(void(*callback)(uint8_t, int)) attachInterrupt(digitalPinToInterrupt(_dio0), onDio0Rise, RISING); } else { detachInterrupt(digitalPinToInterrupt(_dio0)); -//#ifdef SPI_HAS_NOTUSINGINTERRUPT -// _spiModem.notUsingInterrupt(digitalPinToInterrupt(_dio0)); -//#endif +#ifdef SPI_HAS_NOTUSINGINTERRUPT + _spiModem->notUsingInterrupt(digitalPinToInterrupt(_dio0)); +#endif } } @@ -2160,7 +2189,12 @@ void sx128x::receive(int size) rxAntEnable(); - uint8_t mode[3] = {0xFF, 0xFF, 0xFF}; // continuous mode + // On the SX1280, there is a bug which can cause the busy line + // to remain high if a high amount of packets are received when + // in continuous RX mode. This is documented as Errata 16.1 in + // the SX1280 datasheet v3.2 (page 149) + // Therefore, the modem is set to single RX mode below instead. + uint8_t mode[3] = {0}; // single RX mode executeOpcode(OP_RX_8X, mode, 3); } @@ -2528,9 +2562,12 @@ void sx128x::disableCrc() setPacketParams(_preambleLength, _implicitHeaderMode, _payloadLength, _crcMode); } -byte sx128x::random() +uint8_t sx128x::random() { // todo: implement + return 0x4; //chosen by fair die roll + //guarenteed to be random + //https://xkcd.com/221/ } void sx128x::setSPIFrequency(uint32_t frequency) @@ -2564,29 +2601,22 @@ void sx128x::implicitHeaderMode() void sx128x::handleDio0Rise() { - uint8_t buf[2]; + // received a packet + _packetIndex = 0; - buf[0] = 0x00; - buf[1] = 0x00; + uint8_t rxbuf[2] = {0}; + executeOpcodeRead(OP_RX_BUFFER_STATUS_8X, rxbuf, 2); - executeOpcodeRead(OP_GET_IRQ_STATUS_8X, buf, 2); - - executeOpcode(OP_CLEAR_IRQ_STATUS_8X, buf, 2); - - if ((buf[1] & IRQ_PAYLOAD_CRC_ERROR_MASK_8X) == 0) { - // received a packet - _packetIndex = 0; - - uint8_t rxbuf[2] = {0}; - executeOpcodeRead(OP_RX_BUFFER_STATUS_8X, rxbuf, 2); + // If implicit header mode is enabled, read packet length as payload length instead. + // See SX1280 datasheet v3.2, page 92 + if (_implicitHeaderMode == 0x80) { + _rxPacketLength = _payloadLength; + } else { _rxPacketLength = rxbuf[0]; - _fifo_rx_addr_ptr = rxbuf[1]; - readBuffer(_packet, _rxPacketLength); - - if (_onReceive) { - _onReceive(_index, _rxPacketLength); - } + } + if (_onReceive) { + _onReceive(_index, _rxPacketLength); } } @@ -2599,11 +2629,11 @@ void sx128x::updateBitrate() { _csma_slot_ms = 10; float target_preamble_symbols; - if (_bitrate <= LORA_FAST_BITRATE_THRESHOLD) { + //if (_bitrate <= LORA_FAST_BITRATE_THRESHOLD) { target_preamble_symbols = (LORA_PREAMBLE_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW; - } else { - target_preamble_symbols = (LORA_PREAMBLE_FAST_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW; - } + //} else { + /*target_preamble_symbols = (LORA_PREAMBLE_FAST_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW; + }*/ if (target_preamble_symbols < LORA_PREAMBLE_SYMBOLS_MIN) { target_preamble_symbols = LORA_PREAMBLE_SYMBOLS_MIN; } else { @@ -2616,7 +2646,7 @@ void sx128x::updateBitrate() { } } -void sx128x::clearIRQStatus() { +bool ISR_VECT sx128x::getPacketValidity() { uint8_t buf[2]; buf[0] = 0x00; @@ -2625,4 +2655,10 @@ void sx128x::clearIRQStatus() { executeOpcodeRead(OP_GET_IRQ_STATUS_8X, buf, 2); executeOpcode(OP_CLEAR_IRQ_STATUS_8X, buf, 2); + + if ((buf[1] & IRQ_PAYLOAD_CRC_ERROR_MASK_8X) == 0) { + return true; + } else { + return false; + } } diff --git a/Radio.h b/Radio.hpp similarity index 96% rename from Radio.h rename to Radio.hpp index 13bb0da..681db4f 100644 --- a/Radio.h +++ b/Radio.hpp @@ -11,6 +11,7 @@ #include #include "Interfaces.h" #include "Boards.h" +#include "src/misc/FIFOBuffer.h" #define MAX_PKT_LENGTH 255 @@ -128,7 +129,7 @@ public: virtual void updateBitrate() = 0; virtual void handleDio0Rise() = 0; - virtual void clearIRQStatus() = 0; + virtual bool getPacketValidity() = 0; uint32_t getBitrate() { return _bitrate; }; uint8_t getIndex() { return _index; }; void setRadioLock(bool lock) { _radio_locked = lock; }; @@ -333,7 +334,7 @@ protected: class sx126x : public RadioInterface { public: - sx126x(uint8_t index, SPIClass spi, bool tcxo, bool dio2_as_rf_switch, int ss, int sclk, int mosi, int miso, int reset, int + sx126x(uint8_t index, SPIClass* spi, bool tcxo, bool dio2_as_rf_switch, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy, int rxen); int begin(); @@ -421,11 +422,11 @@ private: void reset(void); void calibrate(void); void calibrate_image(uint32_t frequency); - void clearIRQStatus(); + bool getPacketValidity(); private: SPISettings _spiSettings; - SPIClass _spiModem; + SPIClass* _spiModem; int _ss; int _sclk; int _mosi; @@ -454,7 +455,7 @@ private: class sx127x : public RadioInterface { public: - sx127x(uint8_t index, SPIClass spi, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy); + sx127x(uint8_t index, SPIClass* spi, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy); int begin(); void end(); @@ -511,7 +512,7 @@ public: void updateBitrate(); void handleDio0Rise(); - void clearIRQStatus(); + bool getPacketValidity(); private: void setSyncWord(uint8_t sw); void explicitHeaderMode(); @@ -529,7 +530,7 @@ private: private: SPISettings _spiSettings; - SPIClass _spiModem; + SPIClass* _spiModem; int _ss; int _sclk; int _mosi; @@ -548,7 +549,7 @@ private: class sx128x : public RadioInterface { public: - sx128x(uint8_t index, SPIClass spi, bool tcxo, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy, int rxen, int txen); + sx128x(uint8_t index, SPIClass* spi, bool tcxo, int ss, int sclk, int mosi, int miso, int reset, int dio0, int busy, int rxen, int txen); int begin(); void end(); @@ -608,7 +609,8 @@ public: void handleDio0Rise(); - void clearIRQStatus(); + bool getPacketValidity(); + private: void writeBuffer(const uint8_t* buffer, size_t size); void readBuffer(uint8_t* buffer, size_t size); @@ -636,7 +638,7 @@ private: private: SPISettings _spiSettings; - SPIClass _spiModem; + SPIClass* _spiModem; int _ss; int _sclk; int _mosi; diff --git a/Release/esptool/esptool.py b/Release/esptool/esptool.py index d1d62b4..e2ec3a0 100755 --- a/Release/esptool/esptool.py +++ b/Release/esptool/esptool.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # # SPDX-FileCopyrightText: 2014-2022 Fredrik Ahlberg, Angus Gratton, Espressif Systems (Shanghai) CO LTD, other contributors as noted. # diff --git a/Release/esptool/gen_esp32part.py b/Release/esptool/gen_esp32part.py index 273f4e3..3168aa6 100644 --- a/Release/esptool/gen_esp32part.py +++ b/Release/esptool/gen_esp32part.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # # ESP32 partition table generation tool # diff --git a/Release/esptool/spiffsgen.py b/Release/esptool/spiffsgen.py index 45f8449..75ebd61 100644 --- a/Release/esptool/spiffsgen.py +++ b/Release/esptool/spiffsgen.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # # spiffsgen is a tool used to generate a spiffs image from a directory # diff --git a/Utilities.h b/Utilities.h index 3f0a8b8..1006833 100644 --- a/Utilities.h +++ b/Utilities.h @@ -13,7 +13,7 @@ // You should have received a copy of the GNU General Public License // along with this program. If not, see . -#include "Radio.h" +#include "Radio.hpp" #include "Config.h" // Included for sorting @@ -142,6 +142,11 @@ uint8_t boot_vector = 0x00; void led_rx_off() { digitalWrite(pin_led_rx, LOW); } void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } void led_tx_off() { digitalWrite(pin_led_tx, LOW); } + #elif BOARD_MODEL == BOARD_E22_ESP32 + void led_rx_on() { digitalWrite(pin_led_rx, HIGH); } + void led_rx_off() { digitalWrite(pin_led_rx, LOW); } + void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } + void led_tx_off() { digitalWrite(pin_led_tx, LOW); } #elif BOARD_MODEL == BOARD_TBEAM void led_rx_on() { digitalWrite(pin_led_rx, HIGH); } void led_rx_off() { digitalWrite(pin_led_rx, LOW); } @@ -210,7 +215,12 @@ uint8_t boot_vector = 0x00; void led_rx_off() { digitalWrite(pin_led_rx, LOW); } void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } void led_tx_off() { digitalWrite(pin_led_tx, LOW); } - #endif + #elif BOARD_MODEL == BOARD_TECHO + void led_rx_on() { digitalWrite(pin_led_rx, HIGH); } + void led_rx_off() { digitalWrite(pin_led_rx, LOW); } + void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } + void led_tx_off() { digitalWrite(pin_led_tx, LOW); } + #endif #endif void hard_reset(void) { @@ -578,6 +588,18 @@ void serial_write(uint8_t byte) { Serial.write(byte); } else { SerialBT.write(byte); + + #if MCU_VARIANT == MCU_NRF52 && HAS_BLE + // This ensures that the TX buffer is flushed after a frame is queued in serial. + // serial_in_frame is used to ensure that the flush only happens at the end of the frame + if (serial_in_frame && byte == FEND) { + SerialBT.flushTXD(); + serial_in_frame = false; + } + else if (!serial_in_frame && byte == FEND) { + serial_in_frame = true; + } + #endif } #else Serial.write(byte); @@ -1100,7 +1122,7 @@ uint8_t getInterfaceCommandByte(uint8_t index) { } } -uint32_t getQueueSize(uint8_t index) { +uint16_t getQueueSize(uint8_t index) { switch (index) { case 0: return CONFIG_QUEUE_0_SIZE; @@ -1148,6 +1170,8 @@ uint32_t getQueueSize(uint8_t index) { case 11: return CONFIG_QUEUE_11_SIZE; #endif + default: + return CONFIG_QUEUE_0_SIZE; } } @@ -1322,7 +1346,7 @@ bool eeprom_product_valid() { #if PLATFORM == PLATFORM_ESP32 if (rval == PRODUCT_RNODE || rval == BOARD_RNODE_NG_20 || rval == BOARD_RNODE_NG_21 || rval == PRODUCT_HMBRW || rval == PRODUCT_TBEAM || rval == PRODUCT_T32_10 || rval == PRODUCT_T32_20 || rval == PRODUCT_T32_21 || rval == PRODUCT_H32_V2 || rval == PRODUCT_H32_V3) { #elif PLATFORM == PLATFORM_NRF52 - if (rval == PRODUCT_RAK4631 || rval == PRODUCT_HMBRW || rval == PRODUCT_FREENODE) { + if (rval == PRODUCT_TECHO || rval == PRODUCT_RAK4631 || rval == PRODUCT_HMBRW || rval == PRODUCT_FREENODE) { #else if (false) { #endif @@ -1350,6 +1374,8 @@ bool eeprom_model_valid() { if (model == MODEL_FF || model == MODEL_FE) { #elif BOARD_MODEL == BOARD_TBEAM if (model == MODEL_E4 || model == MODEL_E9 || model == MODEL_E3 || model == MODEL_E8) { + #elif BOARD_MODEL == BOARD_TECHO + if (model == MODEL_16 || model == MODEL_17) { #elif BOARD_MODEL == BOARD_LORA32_V1_0 if (model == MODEL_BA || model == MODEL_BB) { #elif BOARD_MODEL == BOARD_LORA32_V2_0 @@ -1516,168 +1542,4 @@ void unlock_rom() { eeprom_erase(); } -typedef struct FIFOBuffer -{ - unsigned char *begin; - unsigned char *end; - unsigned char * volatile head; - unsigned char * volatile tail; -} FIFOBuffer; - -inline bool fifo_isempty(const FIFOBuffer *f) { - return f->head == f->tail; -} - -inline bool fifo_isfull(const FIFOBuffer *f) { - return ((f->head == f->begin) && (f->tail == f->end)) || (f->tail == f->head - 1); -} - -inline void fifo_push(FIFOBuffer *f, unsigned char c) { - *(f->tail) = c; - - if (f->tail == f->end) { - f->tail = f->begin; - } else { - f->tail++; - } -} - -inline unsigned char fifo_pop(FIFOBuffer *f) { - if(f->head == f->end) { - f->head = f->begin; - return *(f->end); - } else { - return *(f->head++); - } -} - -inline void fifo_flush(FIFOBuffer *f) { - f->head = f->tail; -} - -#if MCU_VARIANT != MCU_ESP32 && MCU_VARIANT != MCU_NRF52 - static inline bool fifo_isempty_locked(const FIFOBuffer *f) { - bool result; - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - result = fifo_isempty(f); - } - return result; - } - - static inline bool fifo_isfull_locked(const FIFOBuffer *f) { - bool result; - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - result = fifo_isfull(f); - } - return result; - } - - static inline void fifo_push_locked(FIFOBuffer *f, unsigned char c) { - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - fifo_push(f, c); - } - } -#endif - -/* -static inline unsigned char fifo_pop_locked(FIFOBuffer *f) { - unsigned char c; - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - c = fifo_pop(f); - } - return c; -} -*/ - -inline void fifo_init(FIFOBuffer *f, unsigned char *buffer, size_t size) { - f->head = f->tail = f->begin = buffer; - f->end = buffer + size; -} - -inline size_t fifo_len(FIFOBuffer *f) { - return f->end - f->begin; -} - -typedef struct FIFOBuffer16 -{ - uint16_t *begin; - uint16_t *end; - uint16_t * volatile head; - uint16_t * volatile tail; -} FIFOBuffer16; - -inline bool fifo16_isempty(const FIFOBuffer16 *f) { - return f->head == f->tail; -} - -inline bool fifo16_isfull(const FIFOBuffer16 *f) { - return ((f->head == f->begin) && (f->tail == f->end)) || (f->tail == f->head - 1); -} - -inline void fifo16_push(FIFOBuffer16 *f, uint16_t c) { - *(f->tail) = c; - - if (f->tail == f->end) { - f->tail = f->begin; - } else { - f->tail++; - } -} - -inline uint16_t fifo16_pop(FIFOBuffer16 *f) { - if(f->head == f->end) { - f->head = f->begin; - return *(f->end); - } else { - return *(f->head++); - } -} - -inline void fifo16_flush(FIFOBuffer16 *f) { - f->head = f->tail; -} - -#if MCU_VARIANT != MCU_ESP32 && MCU_VARIANT != MCU_NRF52 - static inline bool fifo16_isempty_locked(const FIFOBuffer16 *f) { - bool result; - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - result = fifo16_isempty(f); - } - - return result; - } -#endif - -/* -static inline bool fifo16_isfull_locked(const FIFOBuffer16 *f) { - bool result; - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - result = fifo16_isfull(f); - } - return result; -} - - -static inline void fifo16_push_locked(FIFOBuffer16 *f, uint16_t c) { - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - fifo16_push(f, c); - } -} - -static inline size_t fifo16_pop_locked(FIFOBuffer16 *f) { - size_t c; - ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - c = fifo16_pop(f); - } - return c; -} -*/ - -inline void fifo16_init(FIFOBuffer16 *f, uint16_t *buffer, uint16_t size) { - f->head = f->tail = f->begin = buffer; - f->end = buffer + size; -} - -inline uint16_t fifo16_len(FIFOBuffer16 *f) { - return (f->end - f->begin); -} +#include "src/misc/FIFOBuffer.h" diff --git a/arduino-cli.yaml b/arduino-cli.yaml index 9c4d8f7..833fd7b 100644 --- a/arduino-cli.yaml +++ b/arduino-cli.yaml @@ -1,4 +1,5 @@ board_manager: additional_urls: + - https://adafruit.github.io/arduino-board-index/package_adafruit_index.json - https://liberatedsystems.co.uk/rnode-firmware-ce/esp-custom-package.json - https://raw.githubusercontent.com/RAKwireless/RAKwireless-Arduino-BSP-Index/main/package_rakwireless_index.json diff --git a/partition_hashes b/partition_hashes index b520250..d6b81fe 100755 --- a/partition_hashes +++ b/partition_hashes @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Copyright (C) 2023, Mark Qvist diff --git a/release_hashes.py b/release_hashes.py index ce28a0c..c54a9d1 100644 --- a/release_hashes.py +++ b/release_hashes.py @@ -1,4 +1,4 @@ -#!/bin/python +#!/bin/python3 # Copyright (C) 2023, Mark Qvist @@ -47,4 +47,4 @@ for filename in files: "version": target_version } -print(json.dumps(release_hashes)) \ No newline at end of file +print(json.dumps(release_hashes)) diff --git a/src/misc/FIFOBuffer.c b/src/misc/FIFOBuffer.c new file mode 100644 index 0000000..86fa0ca --- /dev/null +++ b/src/misc/FIFOBuffer.c @@ -0,0 +1,95 @@ +#include +#include +#include +#include "FIFOBuffer.h" + +#ifdef __cplusplus + extern "C" { +#endif + + bool fifo_isempty(const FIFOBuffer *f) { + return f->head == f->tail; +} + + bool fifo_isfull(const FIFOBuffer *f) { + return ((f->head == f->begin) && (f->tail == f->end)) || (f->tail == f->head - 1); +} + + void fifo_push(FIFOBuffer *f, unsigned char c) { + *(f->tail) = c; + + if (f->tail == f->end) { + f->tail = f->begin; + } else { + f->tail++; + } +} + + unsigned char fifo_pop(FIFOBuffer *f) { + if(f->head == f->end) { + f->head = f->begin; + return *(f->end); + } else { + return *(f->head++); + } +} + + void fifo_flush(FIFOBuffer *f) { + f->head = f->tail; +} + + + void fifo_init(FIFOBuffer *f, unsigned char *buffer, size_t size) { + f->head = f->tail = f->begin = buffer; + f->end = buffer + size; +} + +// todo, fix this so it actually displays the amount of data in the fifo +// buffer, not just the size allocated for the buffer + size_t fifo_len(FIFOBuffer *f) { + return f->end - f->begin; +} + + bool fifo16_isempty(const FIFOBuffer16 *f) { + return f->head == f->tail; +} + + bool fifo16_isfull(const FIFOBuffer16 *f) { + return ((f->head == f->begin) && (f->tail == f->end)) || (f->tail == f->head - 1); +} + + void fifo16_push(FIFOBuffer16 *f, uint16_t c) { + *(f->tail) = c; + + if (f->tail == f->end) { + f->tail = f->begin; + } else { + f->tail++; + } +} + + uint16_t fifo16_pop(FIFOBuffer16 *f) { + if(f->head == f->end) { + f->head = f->begin; + return *(f->end); + } else { + return *(f->head++); + } +} + + void fifo16_flush(FIFOBuffer16 *f) { + f->head = f->tail; +} + + void fifo16_init(FIFOBuffer16 *f, uint16_t *buffer, uint16_t size) { + f->head = f->tail = f->begin = buffer; + f->end = buffer + size; +} + + uint16_t fifo16_len(FIFOBuffer16 *f) { + return (f->end - f->begin); +} + +#ifdef __cplusplus +} +#endif diff --git a/src/misc/FIFOBuffer.h b/src/misc/FIFOBuffer.h new file mode 100644 index 0000000..bdc6d00 --- /dev/null +++ b/src/misc/FIFOBuffer.h @@ -0,0 +1,59 @@ +#ifndef FIFOBUFFER_H + +#define FIFOBUFFER_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* An 8 bit FIFO buffer implementation */ +typedef struct FIFOBuffer +{ + unsigned char *begin; + unsigned char *end; + unsigned char * volatile head; + unsigned char * volatile tail; +} FIFOBuffer; + +bool fifo_isempty(const FIFOBuffer *f); + +bool fifo_isfull(const FIFOBuffer *f); + +void fifo_push(FIFOBuffer *f, unsigned char c); + +unsigned char fifo_pop(FIFOBuffer *f); + +void fifo_flush(FIFOBuffer *f); + +void fifo_init(FIFOBuffer *f, unsigned char *buffer, size_t size); + +size_t fifo_len(FIFOBuffer *f); + +/* A 16-bit implementation of the same FIFO buffer. */ +typedef struct FIFOBuffer16 +{ + uint16_t *begin; + uint16_t *end; + uint16_t * volatile head; + uint16_t * volatile tail; +} FIFOBuffer16; + +bool fifo16_isempty(const FIFOBuffer16 *f); + +bool fifo16_isfull(const FIFOBuffer16 *f); + +void fifo16_push(FIFOBuffer16 *f, uint16_t c); + +uint16_t fifo16_pop(FIFOBuffer16 *f); + +void fifo16_flush(FIFOBuffer16 *f); + +void fifo16_init(FIFOBuffer16 *f, uint16_t *buffer, uint16_t size); + +uint16_t fifo16_len(FIFOBuffer16 *f); + +#ifdef __cplusplus +} +#endif + +#endif