From 733b506af9ad80118ff53815f95ce7192ff75e8f Mon Sep 17 00:00:00 2001 From: "jacob.eva" Date: Sat, 12 Oct 2024 21:03:33 +0100 Subject: [PATCH] Correct T3S3 flashing --- Makefile | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 6d40a9a..e463d3f 100644 --- a/Makefile +++ b/Makefile @@ -224,11 +224,17 @@ upload-rnode_ng_21: python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin upload-t3s3: + @echo + @echo Put board into flashing mode by holding BOOT button while momentarily pressing the RESET button. Hit enter when done. + @read arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3 + @sleep 2 + python ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + @echo + @echo Press the RESET button on the board now, and hit enter + @read @sleep 1 rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin) - @sleep 3 - python ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin upload-featheresp32: arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:featheresp32