Merge pull request #46 from tomuk5/E22_ESP32
ESP32: Ebyte E22 900M30S Board support
This commit is contained in:
jacobeva
GitHub
commit
c6638f1450
42
Boards.h
42
Boards.h
@ -38,8 +38,9 @@
|
||||
#define BOARD_HELTEC32_V3 0x3A
|
||||
#define BOARD_RNODE_NG_20 0x40
|
||||
#define BOARD_RNODE_NG_21 0x41
|
||||
#define BOARD_T3S3 0x42
|
||||
#define BOARD_T3S3 0x42
|
||||
#define BOARD_TECHO 0x43
|
||||
#define BOARD_E22_ESP32 0x44
|
||||
#define BOARD_GENERIC_NRF52 0x50
|
||||
#define BOARD_RAK4631 0x51
|
||||
|
||||
@ -625,6 +626,45 @@
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
|
||||
#elif BOARD_MODEL == BOARD_E22_ESP32
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY OLED
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_BLE true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define INTERFACE_COUNT 1
|
||||
const int pin_led_rx = 2;
|
||||
const int pin_led_tx = 4;
|
||||
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
|
||||
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
||||
// SX1262
|
||||
{
|
||||
true, // DEFAULT_SPI
|
||||
true, // HAS_TCXO
|
||||
true // DIO2_AS_RF_SWITCH
|
||||
},
|
||||
};
|
||||
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
||||
// SX1262
|
||||
{
|
||||
18, // pin_ss
|
||||
5, // pin_sclk
|
||||
27, // pin_mosi
|
||||
19, // pin_miso
|
||||
32, // pin_busy
|
||||
33, // pin_dio
|
||||
23, // pin_reset
|
||||
-1, // pin_txen
|
||||
14, // pin_rxen
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
#else
|
||||
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
|
||||
#endif
|
||||
|
||||
21
Makefile
21
Makefile
@ -77,6 +77,9 @@ firmware-t3s3_sx1262:
|
||||
firmware-t3s3_sx1280_pa:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\""
|
||||
|
||||
firmware-e22_esp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
|
||||
@ -200,6 +203,13 @@ upload-t3s3:
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin)
|
||||
|
||||
upload-e22_esp32:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:esp32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-featheresp32:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:featheresp32
|
||||
@sleep 1
|
||||
@ -214,7 +224,7 @@ upload-rak4631:
|
||||
|
||||
release: release-all
|
||||
|
||||
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes
|
||||
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-e22_esp32 release-hashes
|
||||
|
||||
release-hashes:
|
||||
python3 ./release_hashes.py > ./Release/release.json
|
||||
@ -354,6 +364,15 @@ release-t3s3:
|
||||
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
|
||||
rm -r build
|
||||
|
||||
release-e22_esp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_e22.boot_app0
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_e22.bin
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_e22.bootloader
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_esp32_e22.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_esp32_e22.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_e22.boot_app0 build/rnode_firmware_esp32_e22.bin build/rnode_firmware_esp32_e22.bootloader build/rnode_firmware_esp32_e22.partitions
|
||||
rm -r build
|
||||
|
||||
release-featheresp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
|
||||
|
||||
@ -142,6 +142,11 @@ uint8_t boot_vector = 0x00;
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_E22_ESP32
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
|
||||
Loading…
Reference in New Issue
Block a user