Compare commits
No commits in common. "3b363ca440cfc80414b3cab39f5c70b22d22cd0d" and "b6be830e693629c1117cfb28afb35204d99d6891" have entirely different histories.
3b363ca440
...
b6be830e69
355
Bluetooth.h
355
Bluetooth.h
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -22,8 +22,8 @@
|
||||
#elif HAS_BLE == true
|
||||
#include "esp_bt_main.h"
|
||||
#include "esp_bt_device.h"
|
||||
#include "src/ble/BLESerial.h"
|
||||
BLESerial SerialBT;
|
||||
// TODO: Remove
|
||||
#define SerialBT Serial
|
||||
#endif
|
||||
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
@ -36,7 +36,6 @@
|
||||
#endif
|
||||
|
||||
#define BT_PAIRING_TIMEOUT 35000
|
||||
#define BLE_FLUSH_TIMEOUT 20
|
||||
uint32_t bt_pairing_started = 0;
|
||||
|
||||
#define BT_DEV_ADDR_LEN 6
|
||||
@ -60,7 +59,6 @@ char bt_devname[11];
|
||||
}
|
||||
|
||||
void bt_stop() {
|
||||
//display_unblank();
|
||||
if (bt_state != BT_STATE_OFF) {
|
||||
SerialBT.end();
|
||||
bt_allow_pairing = false;
|
||||
@ -69,7 +67,6 @@ char bt_devname[11];
|
||||
}
|
||||
|
||||
void bt_start() {
|
||||
//display_unblank();
|
||||
if (bt_state == BT_STATE_OFF) {
|
||||
SerialBT.begin(bt_devname);
|
||||
bt_state = BT_STATE_ON;
|
||||
@ -77,7 +74,6 @@ char bt_devname[11];
|
||||
}
|
||||
|
||||
void bt_enable_pairing() {
|
||||
//display_unblank();
|
||||
if (bt_state == BT_STATE_OFF) bt_start();
|
||||
bt_allow_pairing = true;
|
||||
bt_pairing_started = millis();
|
||||
@ -85,14 +81,12 @@ char bt_devname[11];
|
||||
}
|
||||
|
||||
void bt_disable_pairing() {
|
||||
//display_unblank();
|
||||
bt_allow_pairing = false;
|
||||
bt_ssp_pin = 0;
|
||||
bt_state = BT_STATE_ON;
|
||||
}
|
||||
|
||||
void bt_pairing_complete(boolean success) {
|
||||
//display_unblank();
|
||||
if (success) {
|
||||
bt_disable_pairing();
|
||||
} else {
|
||||
@ -100,8 +94,7 @@ char bt_devname[11];
|
||||
}
|
||||
}
|
||||
|
||||
void bt_connection_callback(esp_spp_cb_event_t event, esp_spp_cb_param_t *param) {
|
||||
//display_unblank();
|
||||
void bt_connection_callback(esp_spp_cb_event_t event, esp_spp_cb_param_t *param){
|
||||
if(event == ESP_SPP_SRV_OPEN_EVT) {
|
||||
bt_state = BT_STATE_CONNECTED;
|
||||
cable_state = CABLE_STATE_DISCONNECTED;
|
||||
@ -164,122 +157,25 @@ char bt_devname[11];
|
||||
}
|
||||
|
||||
#elif HAS_BLE == true
|
||||
BLESecurity *ble_security = new BLESecurity();
|
||||
bool ble_authenticated = false;
|
||||
uint32_t pairing_pin = 0;
|
||||
|
||||
void bt_flush() { if (bt_state == BT_STATE_CONNECTED) { SerialBT.flush(); } }
|
||||
void bt_stop() {
|
||||
if (bt_state != BT_STATE_OFF) {
|
||||
bt_allow_pairing = false;
|
||||
bt_state = BT_STATE_OFF;
|
||||
}
|
||||
}
|
||||
|
||||
void bt_disable_pairing() {
|
||||
//display_unblank();
|
||||
bt_allow_pairing = false;
|
||||
bt_ssp_pin = 0;
|
||||
bt_state = BT_STATE_ON;
|
||||
}
|
||||
|
||||
void bt_passkey_notify_callback(uint32_t passkey) {
|
||||
// Serial.printf("Got passkey notification: %d\n", passkey);
|
||||
bt_ssp_pin = passkey;
|
||||
bt_state = BT_STATE_PAIRING;
|
||||
bt_allow_pairing = true;
|
||||
bt_pairing_started = millis();
|
||||
kiss_indicate_btpin();
|
||||
}
|
||||
|
||||
bool bt_confirm_pin_callback(uint32_t pin) {
|
||||
// Serial.printf("Confirm PIN callback: %d\n", pin);
|
||||
return true;
|
||||
}
|
||||
|
||||
void bt_debond_all() {
|
||||
// Serial.println("Debonding all");
|
||||
int dev_num = esp_ble_get_bond_device_num();
|
||||
esp_ble_bond_dev_t *dev_list = (esp_ble_bond_dev_t *)malloc(sizeof(esp_ble_bond_dev_t) * dev_num);
|
||||
esp_ble_get_bond_device_list(&dev_num, dev_list);
|
||||
for (int i = 0; i < dev_num; i++) { esp_ble_remove_bond_device(dev_list[i].bd_addr); }
|
||||
free(dev_list);
|
||||
}
|
||||
|
||||
void bt_update_passkey() {
|
||||
// Serial.println("Updating passkey");
|
||||
pairing_pin = random(899999)+100000;
|
||||
bt_ssp_pin = pairing_pin;
|
||||
}
|
||||
|
||||
uint32_t bt_passkey_callback() {
|
||||
// Serial.println("API passkey request");
|
||||
if (pairing_pin == 0) { bt_update_passkey(); }
|
||||
return pairing_pin;
|
||||
}
|
||||
|
||||
bool bt_client_authenticated() {
|
||||
return ble_authenticated;
|
||||
}
|
||||
|
||||
void bt_security_setup() {
|
||||
uint32_t passkey = bt_passkey_callback();
|
||||
|
||||
// Serial.printf("Executing BT security setup, passkey is %d\n", passkey);
|
||||
|
||||
uint8_t key_size = 16;
|
||||
uint8_t init_key = ESP_BLE_ENC_KEY_MASK | ESP_BLE_ID_KEY_MASK;
|
||||
uint8_t rsp_key = ESP_BLE_ENC_KEY_MASK | ESP_BLE_ID_KEY_MASK;
|
||||
|
||||
esp_ble_auth_req_t auth_req = ESP_LE_AUTH_REQ_SC_MITM_BOND;
|
||||
uint8_t auth_option = ESP_BLE_ONLY_ACCEPT_SPECIFIED_AUTH_ENABLE;
|
||||
uint8_t oob_support = ESP_BLE_OOB_DISABLE;
|
||||
|
||||
esp_ble_io_cap_t iocap = ESP_IO_CAP_OUT;
|
||||
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_SET_STATIC_PASSKEY, &passkey, sizeof(uint32_t));
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_AUTHEN_REQ_MODE, &auth_req, sizeof(uint8_t));
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_IOCAP_MODE, &iocap, sizeof(uint8_t));
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_MAX_KEY_SIZE, &key_size, sizeof(uint8_t));
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_ONLY_ACCEPT_SPECIFIED_SEC_AUTH, &auth_option, sizeof(uint8_t));
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_OOB_SUPPORT, &oob_support, sizeof(uint8_t));
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_SET_INIT_KEY, &init_key, sizeof(uint8_t));
|
||||
esp_ble_gap_set_security_param(ESP_BLE_SM_SET_RSP_KEY, &rsp_key, sizeof(uint8_t));
|
||||
}
|
||||
|
||||
bool bt_security_request_callback() {
|
||||
if (bt_allow_pairing) {
|
||||
// Serial.println("Accepting security request");
|
||||
return true;
|
||||
} else {
|
||||
// Serial.println("Rejecting security request");
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
void bt_authentication_complete_callback(esp_ble_auth_cmpl_t auth_result) {
|
||||
if (auth_result.success == true) {
|
||||
// Serial.println("Authentication success");
|
||||
ble_authenticated = true;
|
||||
bt_state = BT_STATE_CONNECTED;
|
||||
} else {
|
||||
// Serial.println("Authentication fail");
|
||||
ble_authenticated = false;
|
||||
bt_state = BT_STATE_ON;
|
||||
bt_security_setup();
|
||||
}
|
||||
bt_allow_pairing = false;
|
||||
bt_ssp_pin = 0;
|
||||
}
|
||||
|
||||
void bt_connect_callback(BLEServer *server) {
|
||||
// uint16_t conn_id = server->getConnId();
|
||||
// Serial.printf("Connected: %d\n", conn_id);
|
||||
//display_unblank();
|
||||
ble_authenticated = false;
|
||||
void bt_connect_callback(uint16_t conn_handle) {
|
||||
bt_state = BT_STATE_CONNECTED;
|
||||
cable_state = CABLE_STATE_DISCONNECTED;
|
||||
}
|
||||
|
||||
void bt_disconnect_callback(BLEServer *server) {
|
||||
// uint16_t conn_id = server->getConnId();
|
||||
// Serial.printf("Disconnected: %d\n", conn_id);
|
||||
//display_unblank();
|
||||
ble_authenticated = false;
|
||||
void bt_disconnect_callback(uint16_t conn_handle, uint8_t reason) {
|
||||
bt_state = BT_STATE_ON;
|
||||
}
|
||||
|
||||
@ -304,8 +200,8 @@ char bt_devname[11];
|
||||
sprintf(bt_devname, "RNode %02X%02X", bt_dh[14], bt_dh[15]);
|
||||
free(data);
|
||||
|
||||
bt_security_setup();
|
||||
|
||||
// TODO: Implement GAP & GATT for RNode comms over BLE
|
||||
|
||||
bt_ready = true;
|
||||
return true;
|
||||
|
||||
@ -316,20 +212,9 @@ char bt_devname[11];
|
||||
}
|
||||
|
||||
void bt_start() {
|
||||
//display_unblank();
|
||||
if (bt_state == BT_STATE_OFF) {
|
||||
bt_state = BT_STATE_ON;
|
||||
SerialBT.begin(bt_devname);
|
||||
SerialBT.setTimeout(10);
|
||||
}
|
||||
}
|
||||
|
||||
void bt_stop() {
|
||||
//display_unblank();
|
||||
if (bt_state != BT_STATE_OFF) {
|
||||
bt_allow_pairing = false;
|
||||
bt_state = BT_STATE_OFF;
|
||||
SerialBT.end();
|
||||
// TODO: Implement
|
||||
}
|
||||
}
|
||||
|
||||
@ -344,13 +229,7 @@ char bt_devname[11];
|
||||
}
|
||||
|
||||
void bt_enable_pairing() {
|
||||
//display_unblank();
|
||||
if (bt_state == BT_STATE_OFF) bt_start();
|
||||
|
||||
bt_security_setup();
|
||||
//bt_debond_all();
|
||||
//bt_update_passkey();
|
||||
|
||||
bt_allow_pairing = true;
|
||||
bt_pairing_started = millis();
|
||||
bt_state = BT_STATE_PAIRING;
|
||||
@ -360,31 +239,26 @@ char bt_devname[11];
|
||||
if (bt_allow_pairing && millis()-bt_pairing_started >= BT_PAIRING_TIMEOUT) {
|
||||
bt_disable_pairing();
|
||||
}
|
||||
if (bt_state == BT_STATE_CONNECTED && millis()-SerialBT.lastFlushTime >= BLE_FLUSH_TIMEOUT) {
|
||||
if (SerialBT.transmitBufferLength > 0) {
|
||||
bt_flush();
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
uint8_t eeprom_read(uint32_t mapped_addr);
|
||||
uint8_t eeprom_read(uint32_t mapped_addr);
|
||||
|
||||
void bt_stop() {
|
||||
if (bt_state != BT_STATE_OFF) {
|
||||
bt_allow_pairing = false;
|
||||
bt_state = BT_STATE_OFF;
|
||||
}
|
||||
}
|
||||
|
||||
void bt_disable_pairing() {
|
||||
void bt_stop() {
|
||||
if (bt_state != BT_STATE_OFF) {
|
||||
bt_allow_pairing = false;
|
||||
bt_ssp_pin = 0;
|
||||
bt_state = BT_STATE_ON;
|
||||
bt_state = BT_STATE_OFF;
|
||||
}
|
||||
}
|
||||
|
||||
void bt_pairing_complete(uint16_t conn_handle, uint8_t auth_status) {
|
||||
void bt_disable_pairing() {
|
||||
bt_allow_pairing = false;
|
||||
bt_ssp_pin = 0;
|
||||
bt_state = BT_STATE_ON;
|
||||
}
|
||||
|
||||
void bt_pairing_complete(uint16_t conn_handle, uint8_t auth_status) {
|
||||
if (auth_status == BLE_GAP_SEC_STATUS_SUCCESS) {
|
||||
BLEConnection* connection = Bluefruit.Connection(conn_handle);
|
||||
|
||||
@ -417,23 +291,24 @@ char bt_devname[11];
|
||||
} else {
|
||||
bt_ssp_pin = 0;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
bool bt_passkey_callback(uint16_t conn_handle, uint8_t const passkey[6], bool match_request) {
|
||||
bool bt_passkey_callback(uint16_t conn_handle, uint8_t const passkey[6], bool match_request) {
|
||||
for (int i = 0; i < 6; i++) {
|
||||
// multiply by tens however many times needed to make numbers appear in order
|
||||
bt_ssp_pin += ((int)passkey[i] - 48) * pow(10, 5-i);
|
||||
// multiply by tens however many times needed to make numbers appear in order
|
||||
bt_ssp_pin += ((int)passkey[i] - 48) * pow(10, 5-i);
|
||||
}
|
||||
kiss_indicate_btpin();
|
||||
if (bt_allow_pairing) {
|
||||
return true;
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
void bt_connect_callback(uint16_t conn_handle) {
|
||||
void bt_connect_callback(uint16_t conn_handle) {
|
||||
bt_state = BT_STATE_CONNECTED;
|
||||
cable_state = CABLE_STATE_DISCONNECTED;
|
||||
|
||||
BLEConnection* conn = Bluefruit.Connection(conn_handle);
|
||||
conn->requestPHY(BLE_GAP_PHY_2MBPS);
|
||||
conn->requestMtuExchange(512+3);
|
||||
@ -446,91 +321,93 @@ void bt_disconnect_callback(uint16_t conn_handle, uint8_t reason) {
|
||||
}
|
||||
}
|
||||
|
||||
bool bt_setup_hw() {
|
||||
if (!bt_ready) {
|
||||
bool bt_setup_hw() {
|
||||
if (!bt_ready) {
|
||||
#if HAS_EEPROM
|
||||
if (EEPROM.read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
|
||||
#else
|
||||
if (eeprom_read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
|
||||
#endif
|
||||
bt_enabled = true;
|
||||
} else {
|
||||
bt_enabled = false;
|
||||
}
|
||||
Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
|
||||
Bluefruit.autoConnLed(false);
|
||||
if (Bluefruit.begin()) {
|
||||
Bluefruit.setTxPower(8); // Check bluefruit.h for supported values
|
||||
Bluefruit.Security.setIOCaps(true, false, false); // display, yes; yes / no, no; keyboard, no
|
||||
// This device is indeed capable of yes / no through the pairing mode
|
||||
// being set, but I have chosen to set it thus to force the input of the
|
||||
// pin on the device initiating the pairing. This prevents it from being
|
||||
// paired with automatically by a hypothetical malicious device nearby
|
||||
// without physical access to the RNode.
|
||||
|
||||
Bluefruit.Security.setMITM(true);
|
||||
Bluefruit.Security.setPairPasskeyCallback(bt_passkey_callback);
|
||||
Bluefruit.Security.setSecuredCallback(bt_connect_callback);
|
||||
Bluefruit.Periph.setDisconnectCallback(bt_disconnect_callback);
|
||||
Bluefruit.Security.setPairCompleteCallback(bt_pairing_complete);
|
||||
Bluefruit.Periph.setConnInterval(6, 12); // 7.5 - 15 ms
|
||||
|
||||
const ble_gap_addr_t gap_addr = Bluefruit.getAddr();
|
||||
char *data = (char*)malloc(BT_DEV_ADDR_LEN+1);
|
||||
for (int i = 0; i < BT_DEV_ADDR_LEN; i++) {
|
||||
data[i] = gap_addr.addr[i];
|
||||
}
|
||||
#if HAS_EEPROM
|
||||
if (EEPROM.read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
|
||||
data[BT_DEV_ADDR_LEN] = EEPROM.read(eeprom_addr(ADDR_SIGNATURE));
|
||||
#else
|
||||
if (eeprom_read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
|
||||
data[BT_DEV_ADDR_LEN] = eeprom_read(eeprom_addr(ADDR_SIGNATURE));
|
||||
#endif
|
||||
bt_enabled = true;
|
||||
} else {
|
||||
bt_enabled = false;
|
||||
}
|
||||
Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
|
||||
Bluefruit.autoConnLed(false);
|
||||
if (Bluefruit.begin()) {
|
||||
Bluefruit.setTxPower(8); // Check bluefruit.h for supported values
|
||||
Bluefruit.Security.setIOCaps(true, false, false); // display, yes; yes / no, no; keyboard, no
|
||||
// This device is indeed capable of yes / no through the pairing mode
|
||||
// being set, but I have chosen to set it thus to force the input of the
|
||||
// pin on the device initiating the pairing.
|
||||
unsigned char *hash = MD5::make_hash(data, BT_DEV_ADDR_LEN);
|
||||
memcpy(bt_dh, hash, BT_DEV_HASH_LEN);
|
||||
sprintf(bt_devname, "openCom XL %02X%02X", bt_dh[14], bt_dh[15]);
|
||||
free(data);
|
||||
|
||||
Bluefruit.Security.setMITM(true);
|
||||
Bluefruit.Security.setPairPasskeyCallback(bt_passkey_callback);
|
||||
Bluefruit.Security.setSecuredCallback(bt_connect_callback);
|
||||
Bluefruit.Periph.setDisconnectCallback(bt_disconnect_callback);
|
||||
Bluefruit.Security.setPairCompleteCallback(bt_pairing_complete);
|
||||
Bluefruit.Periph.setConnInterval(6, 12); // 7.5 - 15 ms
|
||||
bt_ready = true;
|
||||
return true;
|
||||
|
||||
const ble_gap_addr_t gap_addr = Bluefruit.getAddr();
|
||||
char *data = (char*)malloc(BT_DEV_ADDR_LEN+1);
|
||||
for (int i = 0; i < BT_DEV_ADDR_LEN; i++) {
|
||||
data[i] = gap_addr.addr[i];
|
||||
}
|
||||
#if HAS_EEPROM
|
||||
data[BT_DEV_ADDR_LEN] = EEPROM.read(eeprom_addr(ADDR_SIGNATURE));
|
||||
#else
|
||||
data[BT_DEV_ADDR_LEN] = eeprom_read(eeprom_addr(ADDR_SIGNATURE));
|
||||
#endif
|
||||
unsigned char *hash = MD5::make_hash(data, BT_DEV_ADDR_LEN);
|
||||
memcpy(bt_dh, hash, BT_DEV_HASH_LEN);
|
||||
sprintf(bt_devname, "openCom XL %02X%02X", bt_dh[14], bt_dh[15]);
|
||||
free(data);
|
||||
|
||||
bt_ready = true;
|
||||
return true;
|
||||
|
||||
} else { return false; }
|
||||
} else { return false; }
|
||||
}
|
||||
} else { return false; }
|
||||
}
|
||||
|
||||
void bt_start() {
|
||||
if (bt_state == BT_STATE_OFF) {
|
||||
Bluefruit.setName(bt_devname);
|
||||
bledis.setManufacturer(BLE_MANUFACTURER);
|
||||
bledis.setModel(BLE_MODEL);
|
||||
// start device information service
|
||||
bledis.begin();
|
||||
void bt_start() {
|
||||
if (bt_state == BT_STATE_OFF) {
|
||||
Bluefruit.setName(bt_devname);
|
||||
bledis.setManufacturer(BLE_MANUFACTURER);
|
||||
bledis.setModel(BLE_MODEL);
|
||||
// start device information service
|
||||
bledis.begin();
|
||||
|
||||
if (!SerialBT_init) {
|
||||
if (!SerialBT_init) {
|
||||
|
||||
SerialBT.bufferTXD(true); // enable buffering
|
||||
SerialBT.bufferTXD(true); // enable buffering
|
||||
|
||||
SerialBT.setPermission(SECMODE_ENC_WITH_MITM, SECMODE_ENC_WITH_MITM); // enable encryption for BLE serial
|
||||
SerialBT.begin();
|
||||
SerialBT_init = true;
|
||||
}
|
||||
SerialBT.setPermission(SECMODE_ENC_WITH_MITM, SECMODE_ENC_WITH_MITM); // enable encryption for BLE serial
|
||||
SerialBT.begin();
|
||||
SerialBT_init = true;
|
||||
}
|
||||
|
||||
blebas.begin();
|
||||
blebas.begin();
|
||||
|
||||
Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
|
||||
Bluefruit.Advertising.addTxPower();
|
||||
Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
|
||||
Bluefruit.Advertising.addTxPower();
|
||||
|
||||
// Include bleuart 128-bit uuid
|
||||
Bluefruit.Advertising.addService(SerialBT);
|
||||
// Include bleuart 128-bit uuid
|
||||
Bluefruit.Advertising.addService(SerialBT);
|
||||
|
||||
// There is no room for Name in Advertising packet
|
||||
// Use Scan response for Name
|
||||
Bluefruit.ScanResponse.addName();
|
||||
// There is no room for Name in Advertising packet
|
||||
// Use Scan response for Name
|
||||
Bluefruit.ScanResponse.addName();
|
||||
|
||||
Bluefruit.Advertising.start(0);
|
||||
Bluefruit.Advertising.start(0);
|
||||
|
||||
bt_state = BT_STATE_ON;
|
||||
}
|
||||
}
|
||||
bt_state = BT_STATE_ON;
|
||||
}
|
||||
}
|
||||
|
||||
bool bt_init() {
|
||||
bool bt_init() {
|
||||
bt_state = BT_STATE_OFF;
|
||||
if (bt_setup_hw()) {
|
||||
if (bt_enabled && !console_active) bt_start();
|
||||
@ -538,18 +415,18 @@ void bt_disconnect_callback(uint16_t conn_handle, uint8_t reason) {
|
||||
} else {
|
||||
return false;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void bt_enable_pairing() {
|
||||
if (bt_state == BT_STATE_OFF) bt_start();
|
||||
bt_allow_pairing = true;
|
||||
bt_pairing_started = millis();
|
||||
bt_state = BT_STATE_PAIRING;
|
||||
}
|
||||
void bt_enable_pairing() {
|
||||
if (bt_state == BT_STATE_OFF) bt_start();
|
||||
bt_allow_pairing = true;
|
||||
bt_pairing_started = millis();
|
||||
bt_state = BT_STATE_PAIRING;
|
||||
}
|
||||
|
||||
void update_bt() {
|
||||
if (bt_allow_pairing && millis()-bt_pairing_started >= BT_PAIRING_TIMEOUT) {
|
||||
bt_disable_pairing();
|
||||
}
|
||||
void update_bt() {
|
||||
if (bt_allow_pairing && millis()-bt_pairing_started >= BT_PAIRING_TIMEOUT) {
|
||||
bt_disable_pairing();
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
363
Boards.h
363
Boards.h
@ -25,102 +25,23 @@
|
||||
#define MCU_ESP32 0x81
|
||||
#define MCU_NRF52 0x71
|
||||
|
||||
// Products, boards and models. Grouped by manufacturer.
|
||||
// Below are the original RNodes, sold by Mark Qvist.
|
||||
#define PRODUCT_RNODE 0x03 // RNode devices
|
||||
#define BOARD_RNODE 0x31 // Original v1.0 RNode
|
||||
#define MODEL_A4 0xA4 // RNode v1.0, 433 MHz
|
||||
#define MODEL_A9 0xA9 // RNode v1.0, 868 MHz
|
||||
|
||||
#define BOARD_RNODE_NG_20 0x40 // RNode hardware revision v2.0
|
||||
#define MODEL_A3 0xA3 // RNode v2.0, 433 MHz
|
||||
#define MODEL_A8 0xA8 // RNode v2.0, 868 MHz
|
||||
|
||||
#define BOARD_RNODE_NG_21 0x41 // RNode hardware revision v2.1
|
||||
#define MODEL_A2 0xA2 // RNode v2.1, 433 MHz
|
||||
#define MODEL_A7 0xA7 // RNode v2.1, 868 MHz
|
||||
|
||||
#define BOARD_RNODE_NG_22 0x42 // RNode hardware revision v2.2 (T3S3)
|
||||
#define MODEL_A1 0xA1 // RNode v2.2, 433 MHz with SX1268
|
||||
#define MODEL_A5 0xA5 // RNode v2.2, 433 MHz with SX1278
|
||||
#define MODEL_A6 0xA6 // RNode v2.2, 868 MHz with SX1262
|
||||
#define MODEL_AA 0xAA // RNode v2.2, 868 MHz with SX1276
|
||||
|
||||
#define PRODUCT_TBEAM 0xE0 // T-Beam - sold by LilyGO
|
||||
#define BOARD_TBEAM 0x33
|
||||
#define MODEL_E4 0xE4 // T-Beam SX1278, 433 Mhz
|
||||
#define MODEL_E9 0xE9 // T-Beam SX1276, 868 Mhz
|
||||
#define MODEL_E3 0xE3 // T-Beam SX1268, 433 Mhz
|
||||
#define MODEL_E8 0xE8 // T-Beam SX1262, 868 Mhz
|
||||
|
||||
#define PRODUCT_TDECK_V1 0xD0 // T-Deck - sold by LilyGO
|
||||
#define BOARD_TDECK 0x3B
|
||||
#define MODEL_D4 0xD4 // LilyGO T-Deck, 433 MHz
|
||||
#define MODEL_D9 0xD9 // LilyGO T-Deck, 868 MHz
|
||||
|
||||
#define PRODUCT_TBEAM_S_V1 0xEA // T-Beam Supreme - sold by LilyGO
|
||||
#define BOARD_TBEAM_S_V1 0x3D
|
||||
#define MODEL_DB 0xDB // LilyGO T-Beam Supreme, 433 MHz
|
||||
#define MODEL_DC 0xDC // LilyGO T-Beam Supreme, 868 MHz
|
||||
|
||||
#define PRODUCT_T32_10 0xB2 // T3 v1.0 - sold by LilyGO
|
||||
#define BOARD_LORA32_V1_0 0x39
|
||||
#define MODEL_BA 0xBA // LilyGO T3 v1.0, 433 MHz
|
||||
#define MODEL_BB 0xBB // LilyGO T3 v1.0, 868 MHz
|
||||
|
||||
#define PRODUCT_T32_20 0xB0 // T3 v2.0 - sold by LilyGO
|
||||
#define BOARD_LORA32_V2_0 0x36
|
||||
#define MODEL_B3 0xB3 // LilyGO T3 v2.0, 433 MHz
|
||||
#define MODEL_B8 0xB8 // LilyGO T3 v2.0, 868 MHz
|
||||
|
||||
#define PRODUCT_T32_21 0xB1 // T3 v2.1 - sold by LilyGO
|
||||
#define BOARD_LORA32_V2_1 0x37
|
||||
#define MODEL_B4 0xB4 // LilyGO T3 v2.1, 433 MHz
|
||||
#define MODEL_B9 0xB9 // LilyGO T3 v2.1, 868 MHz
|
||||
|
||||
#define BOARD_T3S3 0x42 // T3S3 - sold by LilyGO
|
||||
#define MODEL_A1 0xA1 // T3S3 SX1262 868/915 MHz
|
||||
#define MODEL_AB 0xAB // T3S3 SX1276 868/915 MHz
|
||||
#define MODEL_A5 0xA5 // T3S3 SX1278 433 MHz
|
||||
#define MODEL_AB 0xAB // T3S3 SX1280 2.4 GHz w/ PA
|
||||
|
||||
#define PRODUCT_TECHO 0x15 // LilyGO T-Echo devices
|
||||
#define BOARD_TECHO 0x43
|
||||
#define MODEL_16 0x16 // T-Echo 433 MHz
|
||||
#define MODEL_17 0x17 // T-Echo 868/915 MHz
|
||||
|
||||
|
||||
#define PRODUCT_H32_V2 0xC0 // LoRa32 v2 - sold by Heltec
|
||||
#define BOARD_HELTEC32_V2 0x38
|
||||
#define MODEL_C4 0xC4 // Heltec Lora32 v2, 433 MHz
|
||||
#define MODEL_C9 0xC9 // Heltec Lora32 v2, 868 MHz
|
||||
|
||||
#define PRODUCT_H32_V3 0xC1 // LoRa32 v3 - sold by Heltec
|
||||
#define BOARD_HELTEC32_V3 0x3A
|
||||
#define MODEL_C5 0xC5 // Heltec Lora32 v3, 433 MHz
|
||||
#define MODEL_CA 0xCA // Heltec Lora32 v3, 868 MHz
|
||||
|
||||
#define PRODUCT_RAK4631 0x10 // RAK4631 - sold by RAKWireless
|
||||
#define BOARD_RAK4631 0x51
|
||||
#define MODEL_11 0x11 // RAK4631, 433 MHz
|
||||
#define MODEL_12 0x12 // RAK4631, 868 MHz
|
||||
#define MODEL_13 0x13 // RAK4631, 433MHz with WisBlock SX1280 module (LIBSYS002)
|
||||
#define MODEL_14 0x14 // RAK4631, 868/915 MHz with WisBlock SX1280 module (LIBSYS002)
|
||||
|
||||
#define PRODUCT_OPENCOM_XL 0x20 // openCom XL - sold by Liberated Embedded Systems
|
||||
#define BOARD_OPENCOM_XL 0x52
|
||||
#define MODEL_21 0x21 // openCom XL, 868/915 MHz
|
||||
|
||||
#define BOARD_E22_ESP32 0x44 // Custom Ebyte E22 board design for meshtastic, source:
|
||||
// https://github.com/NanoVHF/Meshtastic-DIY/blob/main/Schematics/E-Byte_E22/Mesh_Ebyte_E22-XXXM30S.pdf
|
||||
|
||||
#define PRODUCT_HMBRW 0xF0
|
||||
// Boards
|
||||
#define BOARD_RNODE 0x31
|
||||
#define BOARD_HMBRW 0x32
|
||||
#define BOARD_TBEAM 0x33
|
||||
#define BOARD_HUZZAH32 0x34
|
||||
#define BOARD_GENERIC_ESP32 0x35
|
||||
#define BOARD_LORA32_V2_0 0x36
|
||||
#define BOARD_LORA32_V2_1 0x37
|
||||
#define BOARD_LORA32_V1_0 0x39
|
||||
#define BOARD_HELTEC32_V2 0x38
|
||||
#define BOARD_HELTEC32_V3 0x3A
|
||||
#define BOARD_RNODE_NG_20 0x40
|
||||
#define BOARD_RNODE_NG_21 0x41
|
||||
#define BOARD_T3S3 0x42
|
||||
#define BOARD_TECHO 0x43
|
||||
#define BOARD_GENERIC_NRF52 0x50
|
||||
#define MODEL_FE 0xFE // Homebrew board, max 17dBm output power
|
||||
#define MODEL_FF 0xFF // Homebrew board, max 14dBm output power
|
||||
#define BOARD_FREENODE 0x52
|
||||
|
||||
// Displays
|
||||
#define OLED 0x01
|
||||
@ -210,6 +131,7 @@
|
||||
#define DISPLAY OLED
|
||||
#define HAS_PMU true
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_BLE true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
@ -217,39 +139,10 @@
|
||||
#define I2C_SCL 22
|
||||
#define PMU_IRQ 35
|
||||
#define INTERFACE_COUNT 1
|
||||
#define HAS_INPUT true
|
||||
const int pin_btn_usr1 = 38;
|
||||
const int pin_led_rx = 2;
|
||||
const int pin_led_tx = 4;
|
||||
|
||||
#if BOARD_VARIANT == MODEL_E4 || BOARD_VARIANT == MODEL_E9
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
|
||||
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
||||
// SX127X
|
||||
{
|
||||
true, // DEFAULT_SPI
|
||||
false, // HAS_TCXO
|
||||
false // DIO2_AS_RF_SWITCH
|
||||
},
|
||||
};
|
||||
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
||||
// SX127X
|
||||
{
|
||||
18, // pin_ss
|
||||
-1, // pin_sclk
|
||||
-1, // pin_mosi
|
||||
-1, // pin_miso
|
||||
-1, // pin_busy
|
||||
26, // pin_dio
|
||||
23, // pin_reset
|
||||
-1, // pin_txen
|
||||
-1, // pin_rxen
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
|
||||
#elif BOARD_VARIANT == MODEL_E3 || BOARD_VARIANT == MODEL_E8
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X};
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
|
||||
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
||||
// SX1262
|
||||
{
|
||||
@ -273,7 +166,6 @@
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
#endif
|
||||
|
||||
#elif BOARD_MODEL == BOARD_HUZZAH32
|
||||
#define HAS_BLUETOOTH true
|
||||
@ -312,6 +204,7 @@
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY OLED
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_BLE true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_EEPROM true
|
||||
#define INTERFACE_COUNT 1
|
||||
@ -355,6 +248,7 @@
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY OLED
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_BLE true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_EEPROM true
|
||||
#define INTERFACE_COUNT 1
|
||||
@ -399,6 +293,7 @@
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY OLED
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_BLE true
|
||||
#define HAS_PMU true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_EEPROM true
|
||||
@ -472,13 +367,6 @@
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_EEPROM true
|
||||
#define INTERFACE_COUNT 1
|
||||
#define HAS_INPUT true
|
||||
#define HAS_SLEEP true
|
||||
#define PIN_WAKEUP GPIO_NUM_0
|
||||
#define WAKEUP_LEVEL 0
|
||||
|
||||
const int pin_btn_usr1 = 0;
|
||||
|
||||
#if defined(EXTERNAL_LEDS)
|
||||
const int pin_led_rx = 36;
|
||||
const int pin_led_tx = 37;
|
||||
@ -517,8 +405,7 @@
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_BLUETOOTH false
|
||||
#define HAS_BLE true
|
||||
#define HAS_PMU true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_CONSOLE false
|
||||
#define HAS_EEPROM true
|
||||
#define HAS_INPUT true
|
||||
#define HAS_SLEEP true
|
||||
@ -664,6 +551,7 @@
|
||||
|
||||
#elif BOARD_MODEL == BOARD_T3S3
|
||||
#define IS_ESP32S3 true
|
||||
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY OLED
|
||||
#define HAS_CONSOLE false
|
||||
@ -691,7 +579,6 @@
|
||||
const int SD_MOSI = 11;
|
||||
const int SD_CLK = 14;
|
||||
const int SD_CS = 13;
|
||||
|
||||
#if HAS_NP == false
|
||||
#if defined(EXTERNAL_LEDS)
|
||||
const int pin_led_rx = 37;
|
||||
@ -712,6 +599,17 @@
|
||||
true // DIO2_AS_RF_SWITCH
|
||||
},
|
||||
};
|
||||
#elif BOARD_VARIANT == MODEL_A5 // SX1280 with PA
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX1280};
|
||||
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
||||
// SX1280
|
||||
{
|
||||
false, // DEFAULT_SPI
|
||||
false, // HAS_TCXO
|
||||
false // DIO2_AS_RF_SWITCH
|
||||
},
|
||||
};
|
||||
#endif
|
||||
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
|
||||
// SX1262
|
||||
{
|
||||
@ -727,184 +625,13 @@
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
#elif BOARD_VARIANT == MODEL_AB // SX1280 with PA
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX1280};
|
||||
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
||||
// SX1280
|
||||
{
|
||||
false, // DEFAULT_SPI
|
||||
false, // HAS_TCXO
|
||||
false // DIO2_AS_RF_SWITCH
|
||||
},
|
||||
};
|
||||
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
|
||||
// SX1280
|
||||
{
|
||||
7, // pin_ss
|
||||
5, // pin_sclk
|
||||
6, // pin_mosi
|
||||
3, // pin_miso
|
||||
36, // pin_busy
|
||||
9, // pin_dio
|
||||
8, // pin_reset
|
||||
10, // pin_txen
|
||||
21, // pin_rxen
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
#endif
|
||||
|
||||
#elif BOARD_MODEL == BOARD_E22_ESP32
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY OLED
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_BLE true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define INTERFACE_COUNT 1
|
||||
const int pin_led_rx = 2;
|
||||
const int pin_led_tx = 4;
|
||||
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
|
||||
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
||||
// SX1262
|
||||
{
|
||||
true, // DEFAULT_SPI
|
||||
true, // HAS_TCXO
|
||||
true // DIO2_AS_RF_SWITCH
|
||||
},
|
||||
};
|
||||
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
||||
// SX1262
|
||||
{
|
||||
18, // pin_ss
|
||||
5, // pin_sclk
|
||||
27, // pin_mosi
|
||||
19, // pin_miso
|
||||
32, // pin_busy
|
||||
33, // pin_dio
|
||||
23, // pin_reset
|
||||
-1, // pin_txen
|
||||
14, // pin_rxen
|
||||
-1 // pin_tcxo_enable
|
||||
}
|
||||
};
|
||||
|
||||
#elif BOARD_MODEL == BOARD_TDECK
|
||||
#define IS_ESP32S3 true
|
||||
#define MODEM SX1262
|
||||
#define DIO2_AS_RF_SWITCH true
|
||||
#define HAS_BUSY true
|
||||
#define HAS_TCXO true
|
||||
|
||||
#define HAS_DISPLAY false
|
||||
#define HAS_CONSOLE false
|
||||
#define HAS_BLUETOOTH false
|
||||
#define HAS_BLE true
|
||||
#define HAS_PMU true
|
||||
#define HAS_NP false
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
|
||||
#define HAS_INPUT true
|
||||
#define HAS_SLEEP true
|
||||
#define PIN_WAKEUP GPIO_NUM_0
|
||||
#define WAKEUP_LEVEL 0
|
||||
|
||||
const int pin_poweron = 10;
|
||||
const int pin_btn_usr1 = 0;
|
||||
|
||||
const int pin_cs = 9;
|
||||
const int pin_reset = 17;
|
||||
const int pin_sclk = 40;
|
||||
const int pin_mosi = 41;
|
||||
const int pin_miso = 38;
|
||||
const int pin_tcxo_enable = -1;
|
||||
const int pin_dio = 45;
|
||||
const int pin_busy = 13;
|
||||
|
||||
const int SD_MISO = 38;
|
||||
const int SD_MOSI = 41;
|
||||
const int SD_CLK = 40;
|
||||
const int SD_CS = 39;
|
||||
|
||||
const int DISPLAY_DC = 11;
|
||||
const int DISPLAY_CS = 12;
|
||||
const int DISPLAY_MISO = 38;
|
||||
const int DISPLAY_MOSI = 41;
|
||||
const int DISPLAY_CLK = 40;
|
||||
const int DISPLAY_BL_PIN = 42;
|
||||
|
||||
#if HAS_NP == false
|
||||
#if defined(EXTERNAL_LEDS)
|
||||
const int pin_led_rx = 43;
|
||||
const int pin_led_tx = 43;
|
||||
#else
|
||||
const int pin_led_rx = 43;
|
||||
const int pin_led_tx = 43;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#define IS_ESP32S3 true
|
||||
#define MODEM SX1262
|
||||
#define DIO2_AS_RF_SWITCH true
|
||||
#define HAS_BUSY true
|
||||
#define HAS_TCXO true
|
||||
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_CONSOLE true
|
||||
#define HAS_BLUETOOTH false
|
||||
#define HAS_BLE true
|
||||
#define HAS_PMU true
|
||||
#define HAS_NP false
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
|
||||
#define HAS_INPUT true
|
||||
#define HAS_SLEEP false
|
||||
|
||||
#define PMU_IRQ 40
|
||||
#define I2C_SCL 41
|
||||
#define I2C_SDA 42
|
||||
|
||||
const int pin_btn_usr1 = 0;
|
||||
|
||||
const int pin_cs = 10;
|
||||
const int pin_reset = 5;
|
||||
const int pin_sclk = 12;
|
||||
const int pin_mosi = 11;
|
||||
const int pin_miso = 13;
|
||||
const int pin_tcxo_enable = -1;
|
||||
const int pin_dio = 1;
|
||||
const int pin_busy = 4;
|
||||
|
||||
const int SD_MISO = 37;
|
||||
const int SD_MOSI = 35;
|
||||
const int SD_CLK = 36;
|
||||
const int SD_CS = 47;
|
||||
|
||||
const int IMU_CS = 34;
|
||||
|
||||
#if HAS_NP == false
|
||||
#if defined(EXTERNAL_LEDS)
|
||||
const int pin_led_rx = 43;
|
||||
const int pin_led_tx = 43;
|
||||
#else
|
||||
const int pin_led_rx = 43;
|
||||
const int pin_led_tx = 43;
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#else
|
||||
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
|
||||
#endif
|
||||
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
#if BOARD_MODEL == BOARD_TECHO
|
||||
#define VALIDATE_FIRMWARE false
|
||||
#define HAS_INPUT true
|
||||
//#define GPS_BAUD_RATE 115200
|
||||
//#define PIN_GPS_TX 41
|
||||
//#define PIN_GPS_RX 40
|
||||
@ -912,18 +639,17 @@
|
||||
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
||||
//#define HAS_EEPROM true
|
||||
//#define HAS_SD true
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY EINK_BW
|
||||
#define DISPLAY_MODEL GxEPD2_154_D67
|
||||
//#define HAS_DISPLAY true
|
||||
//#define HAS_CONSOLE true
|
||||
//#define HAS_TXCO true
|
||||
//#define DISPLAY EINK_BW
|
||||
//#define HAS_BLE true
|
||||
//#define HAS_PMU true
|
||||
#define CONFIG_UART_BUFFER_SIZE 40000
|
||||
#define CONFIG_QUEUE_0_SIZE 6144
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 200
|
||||
//#define BLE_MANUFACTURER "LilyGO"
|
||||
//#define BLE_MODEL "T-Echo"
|
||||
#define BLE_MANUFACTURER "LilyGO"
|
||||
#define BLE_MODEL "T-Echo"
|
||||
#define INTERFACE_COUNT 1
|
||||
//#define I2C_SDA 26
|
||||
//#define I2C_SCL 27
|
||||
@ -960,17 +686,10 @@
|
||||
const int pin_disp_reset = 2;
|
||||
const int pin_disp_busy = 3;
|
||||
const int pin_disp_en = 43;
|
||||
const int pin_disp_sck = 31;
|
||||
const int pin_disp_mosi = 29;
|
||||
const int pin_disp_miso = -1;
|
||||
|
||||
#define HAS_BACKLIGHT true
|
||||
const int pin_btn_usr1 = 42;
|
||||
const int pin_backlight = 43;
|
||||
|
||||
const int pin_led_rx = LED_BLUE;
|
||||
const int pin_led_tx = LED_RED;
|
||||
#elif BOARD_MODEL == BOARD_OPENCOM_XL
|
||||
#elif BOARD_MODEL == BOARD_FREENODE
|
||||
#define HAS_EEPROM false
|
||||
#define HAS_DISPLAY true
|
||||
#define DISPLAY EINK_BW
|
||||
@ -980,7 +699,9 @@
|
||||
#define HAS_PMU true
|
||||
#define HAS_NP false
|
||||
#define HAS_SD false
|
||||
#define CONFIG_UART_BUFFER_SIZE 40000
|
||||
#define CONFIG_QUEUE_0_SIZE 6144
|
||||
#define CONFIG_QUEUE_1_SIZE 20000
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 200
|
||||
#define EEPROM_SIZE 296
|
||||
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
||||
@ -1005,7 +726,6 @@
|
||||
#define INTERFACE_COUNT 2
|
||||
|
||||
#define CONFIG_QUEUE_1_SIZE 40000
|
||||
#define CONFIG_UART_BUFFER_SIZE 40000 // \todo, does it have to be this big?
|
||||
|
||||
// first interface in list is the primary
|
||||
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X, SX128X};
|
||||
@ -1058,7 +778,6 @@
|
||||
const int pin_disp_busy = WB_IO4;
|
||||
const int pin_disp_en = WB_IO2;
|
||||
|
||||
const int pin_btn_usr1 = 9;
|
||||
const int pin_led_rx = LED_BLUE;
|
||||
const int pin_led_tx = LED_GREEN;
|
||||
#else
|
||||
|
||||
3
Buzzer.h
3
Buzzer.h
@ -33,7 +33,6 @@
|
||||
|
||||
void toggle_buzzer_enable() {
|
||||
buzzer_enabled = !buzzer_enabled;
|
||||
noTone(PIN_BUZZER);
|
||||
digitalWrite(PIN_BUZZER, LOW);
|
||||
update_buzzer_notone();
|
||||
}
|
||||
#endif
|
||||
|
||||
23
Config.h
23
Config.h
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -20,7 +20,7 @@
|
||||
#define CONFIG_H
|
||||
|
||||
#define MAJ_VERS 0x01
|
||||
#define MIN_VERS 0x4b
|
||||
#define MIN_VERS 0x4a
|
||||
|
||||
#define MODE_HOST 0x11
|
||||
#define MODE_TNC 0x12
|
||||
@ -65,6 +65,7 @@
|
||||
// packet RSSI register
|
||||
const int rssi_offset = 157;
|
||||
|
||||
|
||||
// Default LoRa settings
|
||||
const int lora_rx_turnaround_ms = 66;
|
||||
const int lora_post_tx_yield_slots = 6;
|
||||
@ -77,10 +78,10 @@
|
||||
bool pmu_ready = false;
|
||||
bool promisc = false;
|
||||
bool implicit = false;
|
||||
bool memory_low = false;
|
||||
uint8_t implicit_l = 0;
|
||||
|
||||
uint8_t packet_interface = 0xFF;
|
||||
volatile bool packet_ready = false;
|
||||
volatile uint8_t packet_interface = 0xFF;
|
||||
|
||||
uint8_t op_mode = MODE_HOST;
|
||||
uint8_t model = 0x00;
|
||||
@ -89,7 +90,7 @@
|
||||
int last_rssi = -292;
|
||||
uint8_t last_rssi_raw = 0x00;
|
||||
uint8_t last_snr_raw = 0x80;
|
||||
uint8_t seq[INTERFACE_COUNT];
|
||||
uint8_t seq = 0xFF;
|
||||
uint16_t read_len = 0;
|
||||
|
||||
bool serial_in_frame = false;
|
||||
@ -114,10 +115,9 @@
|
||||
unsigned long last_rx = 0;
|
||||
|
||||
// Power management
|
||||
#define BATTERY_STATE_UNKNOWN 0x00
|
||||
#define BATTERY_STATE_DISCHARGING 0x01
|
||||
#define BATTERY_STATE_CHARGING 0x02
|
||||
#define BATTERY_STATE_CHARGED 0x03
|
||||
#define BATTERY_STATE_CHARGING 0x02
|
||||
#define BATTERY_STATE_CHARGED 0x03
|
||||
bool battery_installed = false;
|
||||
bool battery_indeterminate = false;
|
||||
bool external_power = false;
|
||||
@ -127,7 +127,6 @@
|
||||
uint8_t battery_state = 0x00;
|
||||
uint8_t display_intensity = 0xFF;
|
||||
uint8_t display_addr = 0xFF;
|
||||
bool display_blanking_enabled = false;
|
||||
bool display_diagnostics = true;
|
||||
bool device_init_done = false;
|
||||
bool eeprom_ok = false;
|
||||
@ -135,9 +134,9 @@
|
||||
|
||||
// Boot flags
|
||||
#define START_FROM_BOOTLOADER 0x01
|
||||
#define START_FROM_POWERON 0x02
|
||||
#define START_FROM_BROWNOUT 0x03
|
||||
#define START_FROM_JTAG 0x04
|
||||
#define START_FROM_POWERON 0x02
|
||||
#define START_FROM_BROWNOUT 0x03
|
||||
#define START_FROM_JTAG 0x04
|
||||
|
||||
// Subinterfaces
|
||||
// select interface 0 by default
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
|
||||
@ -21,7 +21,7 @@ pages-debug:
|
||||
|
||||
sourcepack:
|
||||
@echo Packing firmware sources...
|
||||
zip --junk-paths -r build/pkg/rnode_firmware.zip ../arduino-cli.yaml ../src/ble/BLESerial.cpp ../src/ble/BLESerial.h ../Bluetooth.h ../Boards.h ../Config.h ../Console.h ../Device.h ../Display.h ../Framing.h ../Graphics.h .../Input.h ../Interfaces.h ../LICENSE ../Makefile ../src/misc/FIFOBuffer.c ../src/misc/FIFOBuffer.h ../src/misc/MD5.cpp ../src/misc/MD5.h ../partition_hashes ../Power.h ../README.md ../release_hashes.py ../RNode_Firmware_CE.ino ../ROM.h ../Radio.cpp ../Radio.hpp ../Utilities.h ../esp32_btbufs.py
|
||||
zip --junk-paths -r build/pkg/rnode_firmware.zip ../arduino-cli.yaml ../Bluetooth.h ../Boards.h ../Config.h ../Console.h ../Device.h ../Display.h ../Framing.h ../Graphics.h ../Input.h ../LICENSE ../Makefile ../MD5.cpp ../MD5.h ../Modem.h ../partition_hashes ../Power.h ../README.md ../release_hashes.py ../RNode_Firmware_CE.ino ../ROM.h ../sx126x.cpp ../sx126x.h ../sx127x.cpp ../sx127x.h ../sx128x.cpp ../sx128x.h ../Utilities.h
|
||||
|
||||
data:
|
||||
@echo Including assets...
|
||||
|
||||
@ -4,9 +4,9 @@ import sys
|
||||
import shutil
|
||||
|
||||
packages = {
|
||||
"rns": "rns-0.8.2-py3-none-any.whl",
|
||||
"nomadnet": "nomadnet-0.5.4-py3-none-any.whl",
|
||||
"lxmf": "lxmf-0.5.5-py3-none-any.whl",
|
||||
"rns": "rns-0.7.5-py3-none-any.whl",
|
||||
"nomadnet": "nomadnet-0.4.9-py3-none-any.whl",
|
||||
"lxmf": "lxmf-0.4.3-py3-none-any.whl",
|
||||
"rnsh": "rnsh-0.1.4-py3-none-any.whl",
|
||||
}
|
||||
|
||||
@ -174,34 +174,26 @@ mf.write(help_redirect)
|
||||
mf.close()
|
||||
|
||||
def optimise_manual(path):
|
||||
pm = 60
|
||||
pm = 110
|
||||
scale_imgs = [
|
||||
("_images/board_rnodev2.png", pm),
|
||||
("_images/board_rnode.png", pm),
|
||||
("_images/board_heltec32v20.png", pm),
|
||||
("_images/board_heltec32v30.png", pm),
|
||||
("_images/board_heltec32.png", pm),
|
||||
("_images/board_t3v21.png", pm),
|
||||
("_images/board_t3v20.png", pm),
|
||||
("_images/board_t3v10.png", pm),
|
||||
("_images/board_t3s3.png", pm),
|
||||
("_images/board_tbeam.png", pm),
|
||||
("_images/board_tdeck.png", pm),
|
||||
("_images/board_rak4631.png", pm),
|
||||
("_images/board_tbeam_supreme.png", pm),
|
||||
("_images/sideband_devices.webp", pm),
|
||||
("_images/board_tbeam.png", pm),
|
||||
("_images/nomadnet_3.png", pm),
|
||||
("_images/meshchat_1.webp", pm),
|
||||
("_images/radio_is5ac.png", pm),
|
||||
("_images/radio_rblhg5.png", pm),
|
||||
("_static/rns_logo_512.png", 256),
|
||||
("../images/bg_h_1.webp", pm),
|
||||
]
|
||||
|
||||
import subprocess
|
||||
import shlex
|
||||
for i,s in scale_imgs:
|
||||
fp = path+"/"+i
|
||||
resize = "convert "+fp+" -quality 25 -resize "+str(s)+" "+fp
|
||||
resize = "convert "+fp+" -resize "+str(s)+" "+fp
|
||||
print(resize)
|
||||
subprocess.call(shlex.split(resize), stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
|
||||
|
||||
@ -213,7 +205,6 @@ def optimise_manual(path):
|
||||
"_static/scripts/furo.js.map",
|
||||
"_static/jquery-3.6.0.js",
|
||||
"_static/jquery.js",
|
||||
"static/underscore-1.13.1.js",
|
||||
"_static/_sphinx_javascript_frameworks_compat.js",
|
||||
"_static/scripts/furo.js.LICENSE.txt",
|
||||
"_static/styles/furo-extensions.css.map",
|
||||
|
||||
5
Device.h
5
Device.h
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -296,8 +296,7 @@ bool device_init() {
|
||||
}
|
||||
#else
|
||||
// Skip hash comparison and checking BT
|
||||
device_init_done = true;
|
||||
return device_init_done;
|
||||
return true;
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
12
Framing.h
12
Framing.h
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -53,8 +53,6 @@
|
||||
#define CMD_FB_READL 0x44
|
||||
#define CMD_DISP_INT 0x45
|
||||
#define CMD_DISP_ADDR 0x63
|
||||
#define CMD_DISP_BLNK 0x64
|
||||
#define CMD_NP_INT 0x65
|
||||
#define CMD_BT_CTRL 0x46
|
||||
#define CMD_BT_PIN 0x62
|
||||
|
||||
@ -83,7 +81,7 @@
|
||||
#define CMD_INT1_DATA 0x10
|
||||
#define CMD_INT2_DATA 0x20
|
||||
#define CMD_INT3_DATA 0x70
|
||||
#define CMD_INT4_DATA 0x75
|
||||
#define CMD_INT4_DATA 0x80
|
||||
#define CMD_INT5_DATA 0x90
|
||||
#define CMD_INT6_DATA 0xA0
|
||||
#define CMD_INT7_DATA 0xB0
|
||||
@ -95,8 +93,8 @@
|
||||
#define CMD_SEL_INT0 0x1E
|
||||
#define CMD_SEL_INT1 0x1F
|
||||
#define CMD_SEL_INT2 0x2F
|
||||
#define CMD_SEL_INT3 0x74
|
||||
#define CMD_SEL_INT4 0x7F
|
||||
#define CMD_SEL_INT3 0x7F
|
||||
#define CMD_SEL_INT4 0x8F
|
||||
#define CMD_SEL_INT5 0x9F
|
||||
#define CMD_SEL_INT6 0xAF
|
||||
#define CMD_SEL_INT7 0xBF
|
||||
@ -121,8 +119,6 @@
|
||||
#define ERROR_TXFAILED 0x02
|
||||
#define ERROR_EEPROM_LOCKED 0x03
|
||||
#define ERROR_QUEUE_FULL 0x04
|
||||
#define ERROR_MEMORY_LOW 0x05
|
||||
#define ERROR_MODEM_TIMEOUT 0x06
|
||||
|
||||
// Serial framing variables
|
||||
size_t frame_len;
|
||||
|
||||
794
Graphics.h
794
Graphics.h
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -13,7 +13,402 @@
|
||||
// You should have received a copy of the GNU General Public License
|
||||
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
||||
#if DISP_H == 122
|
||||
#if DISP_H == UNSCALED_MAX
|
||||
// use 64px wide graphics
|
||||
|
||||
const unsigned char bm_cable [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x1c, 0x00, 0x38, 0x07, 0xfc, 0x08, 0x38, 0x10, 0x1c, 0x10, 0x00, 0x08, 0x00,
|
||||
0x07, 0xc0, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x07, 0xc0, 0x08, 0x00, 0x10, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x04, 0x80, 0x04, 0x43, 0x08, 0x46,
|
||||
0xf1, 0x8f, 0x02, 0x16, 0x02, 0x23, 0x01, 0x20, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_bt [] PROGMEM = {
|
||||
0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x11, 0x40, 0x00, 0x00, 0x05, 0x10, 0x00, 0x00, 0x01, 0x40,
|
||||
0x00, 0x00, 0x01, 0x40, 0x00, 0x00, 0x05, 0x10, 0x00, 0x00, 0x11, 0x40, 0x00, 0x00, 0x01, 0x00,
|
||||
0x00, 0x00, 0x01, 0x00, 0x01, 0x80, 0x01, 0x40, 0x09, 0x20, 0x05, 0x10, 0x03, 0x20, 0x01, 0x40,
|
||||
0x01, 0x80, 0x01, 0x40, 0x03, 0x20, 0x05, 0x10, 0x09, 0x20, 0x01, 0x40, 0x01, 0x80, 0x01, 0x00,
|
||||
0x00, 0x00, 0x01, 0x00, 0x01, 0x80, 0x01, 0x40, 0x09, 0x20, 0x05, 0x10, 0x03, 0x20, 0x01, 0x40,
|
||||
0x29, 0x94, 0x01, 0x40, 0x03, 0x20, 0x05, 0x10, 0x09, 0x20, 0x01, 0x40, 0x01, 0x80, 0x01, 0x00,
|
||||
0x00, 0x00, 0x01, 0x00, 0x01, 0x80, 0x01, 0x40, 0x09, 0x20, 0x05, 0x10, 0x03, 0x20, 0x11, 0x48,
|
||||
0x29, 0x94, 0x11, 0x48, 0x03, 0x20, 0x05, 0x10, 0x09, 0x20, 0x01, 0x40, 0x01, 0x80, 0x01, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_rf [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4e, 0xc4,
|
||||
0x4a, 0xaa, 0x4a, 0xce, 0x6e, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x07, 0xe0, 0x08, 0x10, 0x13, 0xc8, 0x04, 0x20, 0x01, 0x80, 0x00, 0x00, 0x4e, 0xc4,
|
||||
0x4a, 0xaa, 0x4a, 0xce, 0x6e, 0xaa, 0x00, 0x00, 0x01, 0x80, 0x04, 0x20, 0x03, 0xc0, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x71, 0x4e,
|
||||
0x31, 0x48, 0x61, 0xca, 0x74, 0x4e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x07, 0xe0, 0x08, 0x10, 0x13, 0xc8, 0x04, 0x20, 0x01, 0x80, 0x00, 0x00, 0x71, 0x4e,
|
||||
0x31, 0x48, 0x61, 0xca, 0x74, 0x4e, 0x00, 0x00, 0x01, 0x80, 0x04, 0x20, 0x03, 0xc0, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_boot [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xfc, 0x38, 0x66, 0x67, 0x1c, 0x3f, 0xff, 0xff, 0xfc, 0x99, 0xe6, 0x66, 0x4c, 0xff, 0xff,
|
||||
0xff, 0xfc, 0x98, 0x70, 0xe6, 0x7c, 0x3f, 0xff, 0xff, 0xfc, 0x99, 0xf0, 0xe6, 0x4c, 0xff, 0xff,
|
||||
0xff, 0xfc, 0x38, 0x79, 0xe7, 0x1c, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0x0c, 0x38, 0xe1, 0xc3, 0x33, 0x38, 0x7f, 0xfe, 0x7e, 0x72, 0x64, 0xe7, 0x31, 0x33, 0xff,
|
||||
0xff, 0x1e, 0x70, 0x61, 0xe7, 0x30, 0x32, 0x7f, 0xff, 0xce, 0x72, 0x61, 0xe7, 0x32, 0x32, 0x7f,
|
||||
0xfe, 0x1e, 0x72, 0x64, 0xe7, 0x33, 0x38, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_no_radio [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0xc7, 0x0e, 0x71, 0xfc, 0xce, 0x38, 0x7f,
|
||||
0xc9, 0x93, 0x26, 0x64, 0xfc, 0x4c, 0x9c, 0xff, 0xc3, 0x83, 0x26, 0x64, 0xfc, 0x0c, 0x9c, 0xff,
|
||||
0xc3, 0x93, 0x26, 0x64, 0xfc, 0x8c, 0x9c, 0xff, 0xc9, 0x93, 0x0e, 0x71, 0xfc, 0xce, 0x3c, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x8e, 0x4c, 0xcc, 0x3f, 0xff, 0xfc, 0xff,
|
||||
0xcf, 0x26, 0x4c, 0x4c, 0x9f, 0xff, 0xfb, 0x7f, 0xc3, 0x26, 0x4c, 0x0c, 0x9f, 0xff, 0xfb, 0x7f,
|
||||
0xcf, 0x26, 0x4c, 0x8c, 0x9f, 0xff, 0xf7, 0xbf, 0xcf, 0x8f, 0x1c, 0xcc, 0x3f, 0xff, 0xf4, 0xbf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbf, 0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbc, 0xf7,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7c, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xfb,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_hwfail [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe4, 0xe3, 0x87, 0x0e, 0x73, 0x8e, 0x1c, 0x3f,
|
||||
0xe4, 0xc9, 0x93, 0x26, 0x53, 0x26, 0x4c, 0xff, 0xe0, 0xc1, 0x87, 0x26, 0x53, 0x06, 0x1c, 0x3f,
|
||||
0xe4, 0xc9, 0x87, 0x26, 0x03, 0x26, 0x1c, 0xff, 0xe4, 0xc9, 0x93, 0x0f, 0x27, 0x26, 0x4c, 0x3f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xe1, 0xc7, 0x33, 0xc9, 0x87, 0x0f, 0xf9, 0xff, 0xe7, 0x93, 0x33, 0xc9, 0x93, 0x3f, 0xf6, 0xff,
|
||||
0xe1, 0x83, 0x33, 0xc9, 0x87, 0x0f, 0xf6, 0xff, 0xe7, 0x93, 0x33, 0xc9, 0x87, 0x3f, 0xef, 0x7f,
|
||||
0xe7, 0x93, 0x30, 0xe3, 0x93, 0x0f, 0xe9, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xd9, 0xbf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xd9, 0xbf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb9, 0xdf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb9, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xef,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x79, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xf9, 0xf7,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x0f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_console [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff,
|
||||
0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff, 0xff, 0x1f, 0xcf, 0xff, 0xff, 0xf3, 0xf8, 0xff,
|
||||
0xfe, 0x3f, 0x9f, 0xff, 0xff, 0xf9, 0xfc, 0x7f, 0xfc, 0x7f, 0x99, 0xe6, 0x61, 0x99, 0xfe, 0x3f,
|
||||
0xf8, 0xe7, 0x99, 0x26, 0x67, 0x99, 0xe7, 0x1f, 0xf9, 0xc7, 0x99, 0x26, 0x61, 0x99, 0xe3, 0x9f,
|
||||
0xf1, 0x8f, 0x98, 0x06, 0x67, 0x99, 0xf1, 0x8f, 0xf3, 0x9f, 0x9c, 0xce, 0x67, 0x99, 0xf9, 0xcf,
|
||||
0xf3, 0x99, 0x9f, 0xff, 0xff, 0xf9, 0x99, 0xcf, 0xf3, 0x99, 0x9f, 0xff, 0xff, 0xf9, 0x99, 0xcf,
|
||||
0xf3, 0x9f, 0x9f, 0xe3, 0x83, 0xf9, 0xf9, 0xcf, 0xf1, 0x8f, 0x9f, 0xc9, 0x93, 0xf9, 0xf1, 0x8f,
|
||||
0xf9, 0xc7, 0x9f, 0xc1, 0x83, 0xf9, 0xe3, 0x9f, 0xf8, 0xe7, 0x9f, 0xc9, 0x9f, 0xf9, 0xe7, 0x1f,
|
||||
0xfc, 0x7f, 0x9f, 0xc9, 0x9f, 0xf9, 0xfe, 0x3f, 0xfe, 0x3f, 0x9f, 0xff, 0xff, 0xf9, 0xfc, 0x7f,
|
||||
0xff, 0x1f, 0xcf, 0xff, 0xff, 0xf3, 0xf8, 0xff, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff,
|
||||
0xff, 0xff, 0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xfd, 0xff, 0x7f, 0xdf, 0xf7, 0xfd, 0xff, 0x7f,
|
||||
0xfd, 0xff, 0x7f, 0xdf, 0xf7, 0xfd, 0xff, 0x7f, 0xfd, 0xff, 0x7f, 0xdf, 0xf7, 0xfd, 0xff, 0x7f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x78, 0x1e, 0x07, 0x81, 0xe0, 0x78, 0x1f,
|
||||
0xef, 0xbb, 0xee, 0xfb, 0xbe, 0xef, 0xbb, 0xef, 0xe8, 0xda, 0xb6, 0x9d, 0xb3, 0x6d, 0xda, 0x37,
|
||||
0xef, 0xda, 0xf6, 0xb5, 0xad, 0x6c, 0xdb, 0xf7, 0xe8, 0x5a, 0x36, 0x95, 0xad, 0x6c, 0xda, 0x97,
|
||||
0xef, 0xdb, 0xf6, 0x85, 0xb3, 0x6c, 0xda, 0x97, 0xea, 0x5a, 0x36, 0xb5, 0xb3, 0x6c, 0xdb, 0xf7,
|
||||
0xef, 0xda, 0xf6, 0xa5, 0xad, 0x6f, 0xda, 0x57, 0xe8, 0x5a, 0xb6, 0x85, 0xad, 0x6c, 0xda, 0x57,
|
||||
0xef, 0xdb, 0xf6, 0xfd, 0xbf, 0x6f, 0xdb, 0xf7, 0xe0, 0x18, 0x06, 0x01, 0x80, 0x60, 0x18, 0x07,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xfe, 0x42, 0x7c, 0x60, 0xf0, 0x78, 0x3c, 0x7f, 0xfe, 0x4a, 0x7c, 0x64, 0xf2, 0x79, 0x3c, 0x7f,
|
||||
0xfe, 0x43, 0xfe, 0x64, 0xf2, 0x79, 0x3e, 0x7f, 0xfe, 0x4e, 0x7e, 0x64, 0x92, 0x49, 0x26, 0x7f,
|
||||
0xfe, 0x4e, 0x7e, 0x60, 0x90, 0x48, 0x26, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_pairing [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xf0, 0xe3, 0x98, 0x73, 0x33, 0x87, 0xff, 0xff, 0xf2, 0xc9, 0x99, 0x33, 0x13, 0x3f, 0xff,
|
||||
0xff, 0xf0, 0xc1, 0x98, 0x73, 0x03, 0x27, 0xff, 0xff, 0xf3, 0xc9, 0x98, 0x73, 0x23, 0x27, 0xff,
|
||||
0xff, 0xf3, 0xc9, 0x99, 0x33, 0x33, 0x8f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_fw_update [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xfc, 0x98, 0x70, 0xf1, 0xc3, 0x33, 0x38, 0x7f, 0xfc, 0x99, 0x32, 0x64, 0xe7, 0x31, 0x33, 0xff,
|
||||
0xfc, 0x98, 0x72, 0x60, 0xe7, 0x30, 0x32, 0x7f, 0xfc, 0x99, 0xf2, 0x64, 0xe7, 0x32, 0x32, 0x7f,
|
||||
0xfe, 0x39, 0xf0, 0xe4, 0xe7, 0x33, 0x38, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xf8, 0x66, 0x1c, 0xe6, 0x73, 0x8e, 0x1c, 0x3f, 0xf9, 0xe6, 0x4c, 0x46, 0x53, 0x26, 0x4c, 0xff,
|
||||
0xf8, 0x66, 0x1c, 0x06, 0x53, 0x06, 0x1c, 0x3f, 0xf9, 0xe6, 0x1c, 0xa6, 0x03, 0x26, 0x1c, 0xff,
|
||||
0xf9, 0xe6, 0x4c, 0xe7, 0x27, 0x26, 0x4c, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_version [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0x99, 0x86, 0x1e, 0x19, 0xc7, 0x33, 0xff, 0xff, 0x99, 0x9e, 0x4c, 0xf9, 0x93, 0x13, 0xff,
|
||||
0xff, 0xc3, 0x86, 0x1e, 0x39, 0x93, 0x03, 0xff, 0xff, 0xc3, 0x9e, 0x1f, 0x99, 0x93, 0x23, 0xff,
|
||||
0xff, 0xe7, 0x86, 0x4c, 0x39, 0xc7, 0x33, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_updating [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xf1, 0xff, 0x71, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x7f, 0xf5, 0xff, 0x75, 0x7f, 0xff, 0xff, 0xff, 0x7f, 0xf1, 0xff, 0x71, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x17, 0xd4, 0x7f, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x57, 0xd5, 0x7f, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x17, 0xd4, 0x7f, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x47, 0x44, 0x71, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x57, 0x55, 0x75, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x47, 0x44, 0x71, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x44, 0x51, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x44, 0x51, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x14, 0x54, 0x45, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x14, 0x54, 0x45, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff,
|
||||
0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x01, 0xff, 0xff,
|
||||
0xff, 0xff, 0x60, 0x00, 0x00, 0x03, 0x7f, 0xff, 0xff, 0xff, 0x30, 0x00, 0x00, 0x07, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xf8, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x5c, 0x00, 0x00, 0x1c, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x56, 0x00, 0x00, 0x35, 0x7f, 0xff, 0xff, 0xff, 0x57, 0x00, 0x00, 0x74, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0x80, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x44, 0xc0, 0x01, 0xd1, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x60, 0x03, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x44, 0x70, 0x07, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0x14, 0x5c, 0x1d, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x56, 0x35, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x14, 0x57, 0xe5, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff,
|
||||
0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
static unsigned char bm_def[] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb4, 0x61, 0x10, 0x8c, 0x23, 0xc4, 0x3f, 0xff,
|
||||
0xb5, 0xa7, 0xb7, 0xb5, 0xed, 0xed, 0xbf, 0xff, 0xb5, 0xb9, 0xb4, 0xb4, 0x6d, 0xed, 0xbf, 0xff,
|
||||
0x85, 0xa1, 0x10, 0xb4, 0x21, 0x44, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0xe7, 0x1c, 0xfe, 0x7f, 0x8f, 0xf0, 0x00,
|
||||
0x1f, 0xf7, 0x9d, 0xff, 0x7f, 0x9f, 0xf0, 0x00, 0x1c, 0x77, 0xfd, 0xc7, 0x73, 0xdc, 0x00, 0x00,
|
||||
0x1f, 0xe7, 0xfd, 0xc7, 0x71, 0xdf, 0x00, 0x00, 0x1f, 0xe7, 0x7d, 0xc7, 0x71, 0xdf, 0x00, 0x00,
|
||||
0x1c, 0x77, 0x3d, 0xc7, 0x73, 0xdc, 0x00, 0x00, 0x1c, 0x77, 0x1d, 0xff, 0x7f, 0x9f, 0xf0, 0x00,
|
||||
0x1c, 0x77, 0x1c, 0xfe, 0x7f, 0x0f, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x54,
|
||||
0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x62, 0x24, 0x49, 0x22, 0x4e, 0x44,
|
||||
0x00, 0x24, 0x93, 0x66, 0xc9, 0x32, 0x44, 0x28, 0x00, 0x20, 0x92, 0xa5, 0x49, 0x2a, 0x44, 0x10,
|
||||
0x00, 0x24, 0x92, 0x24, 0x49, 0x26, 0x44, 0x10, 0x00, 0x18, 0x62, 0x24, 0x46, 0x22, 0x44, 0x10,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x1c, 0x9c, 0x44, 0x88, 0xc7, 0x1c, 0x00, 0x00, 0x10, 0x92, 0x6c, 0xa9, 0x24, 0x90,
|
||||
0x00, 0x00, 0x1c, 0x9c, 0x54, 0xa9, 0xe7, 0x1c, 0x00, 0x00, 0x10, 0x94, 0x44, 0xa9, 0x25, 0x10,
|
||||
0x00, 0x00, 0x10, 0x92, 0x44, 0x51, 0x24, 0x9c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_def_lc [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb4, 0x61, 0x10, 0x8c, 0x23, 0xc4, 0x3f, 0xff,
|
||||
0xb5, 0xa7, 0xb7, 0xb5, 0xed, 0xed, 0xbf, 0xff, 0xb5, 0xb9, 0xb4, 0xb4, 0x6d, 0xed, 0xbf, 0xff,
|
||||
0x85, 0xa1, 0x10, 0xb4, 0x21, 0x44, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0xe7, 0x1c, 0xfe, 0x7f, 0x8f, 0xf0, 0x00,
|
||||
0x1f, 0xf7, 0x9d, 0xff, 0x7f, 0x9f, 0xf0, 0x00, 0x1c, 0x77, 0xfd, 0xc7, 0x73, 0xdc, 0x00, 0x00,
|
||||
0x1f, 0xe7, 0xfd, 0xc7, 0x71, 0xdf, 0x00, 0x00, 0x1f, 0xe7, 0x7d, 0xc7, 0x71, 0xdf, 0x00, 0x00,
|
||||
0x1c, 0x77, 0x3d, 0xc7, 0x73, 0xdc, 0x00, 0x00, 0x1c, 0x77, 0x1d, 0xff, 0x7f, 0x9f, 0xf0, 0x00,
|
||||
0x1c, 0x77, 0x1c, 0xfe, 0x7f, 0x0f, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x54,
|
||||
0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x8e, 0x39, 0x10, 0x61, 0x88, 0x91, 0x1c,
|
||||
0x02, 0x49, 0x21, 0x90, 0x92, 0x4d, 0x9b, 0x20, 0x02, 0x4e, 0x39, 0x50, 0x82, 0x4a, 0x95, 0x18,
|
||||
0x02, 0x48, 0x21, 0x30, 0x92, 0x48, 0x91, 0x04, 0x01, 0x88, 0x39, 0x10, 0x61, 0x88, 0x91, 0x38,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x01, 0xc8, 0x8e, 0x73, 0x91, 0x1c, 0x00, 0x00, 0x02, 0x05, 0x10, 0x22, 0x1b, 0x20,
|
||||
0x00, 0x00, 0x01, 0x82, 0x0c, 0x23, 0x95, 0x18, 0x00, 0x00, 0x00, 0x42, 0x02, 0x22, 0x11, 0x04,
|
||||
0x00, 0x00, 0x03, 0x82, 0x1c, 0x23, 0x91, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_hwok [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xf2, 0x71, 0xc3, 0x87, 0x39, 0xc7, 0x0e, 0x1f, 0xf2, 0x64, 0xc9, 0x93, 0x29, 0x93, 0x26, 0x7f,
|
||||
0xf0, 0x60, 0xc3, 0x93, 0x29, 0x83, 0x0e, 0x1f, 0xf2, 0x64, 0xc3, 0x93, 0x01, 0x93, 0x0e, 0x7f,
|
||||
0xf2, 0x64, 0xc9, 0x87, 0x93, 0x93, 0x26, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0x33, 0x30, 0xff, 0x8e, 0x4f, 0xff,
|
||||
0xff, 0xf3, 0x13, 0x39, 0xff, 0x26, 0x1f, 0xff, 0xff, 0xf3, 0x03, 0x39, 0xff, 0x26, 0x3f, 0xff,
|
||||
0xff, 0xf3, 0x23, 0x39, 0xff, 0x26, 0x1f, 0xff, 0xff, 0xf3, 0x33, 0x39, 0xff, 0x8e, 0x4f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xc3, 0x0e, 0x67, 0xf8, 0x70, 0xe3, 0x87, 0x33, 0xe7, 0x27, 0x0f, 0xf9, 0x33, 0xc9, 0x93, 0x87,
|
||||
0xe7, 0x0f, 0x9f, 0xf8, 0x70, 0xc1, 0x93, 0xcf, 0xe7, 0x0f, 0x0f, 0xf8, 0x73, 0xc9, 0x93, 0xcf,
|
||||
0xe7, 0x26, 0x67, 0xf9, 0x30, 0xc9, 0x87, 0xcf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_console_active [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0x8e, 0x67, 0x0e, 0x39, 0xe1, 0xff,
|
||||
0xff, 0x93, 0x26, 0x26, 0x7c, 0x99, 0xe7, 0xff, 0xff, 0x9f, 0x26, 0x07, 0x1c, 0x99, 0xe1, 0xff,
|
||||
0xff, 0x93, 0x26, 0x47, 0xcc, 0x99, 0xe7, 0xff, 0xff, 0xc7, 0x8e, 0x66, 0x1e, 0x38, 0x61, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3c, 0x70, 0xcc, 0xcc, 0x3f, 0xff,
|
||||
0xff, 0xfc, 0x99, 0x39, 0xcc, 0xcc, 0xff, 0xff, 0xff, 0xfc, 0x19, 0xf9, 0xce, 0x1c, 0x3f, 0xff,
|
||||
0xff, 0xfc, 0x99, 0x39, 0xce, 0x1c, 0xff, 0xff, 0xff, 0xfc, 0x9c, 0x79, 0xcf, 0x3c, 0x3f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_checks [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x87, 0x0c, 0x99, 0xc7, 0x0f,
|
||||
0xe6, 0x00, 0x7f, 0x93, 0x3c, 0x99, 0x93, 0x3f, 0xe6, 0x00, 0x7f, 0x93, 0x0e, 0x39, 0x9f, 0x0f,
|
||||
0xff, 0xff, 0xff, 0x93, 0x3e, 0x39, 0x93, 0x3f, 0xff, 0xff, 0xff, 0x87, 0x0f, 0x79, 0xc7, 0x0f,
|
||||
0xe6, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe6, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x39, 0x30, 0xe3, 0x93, 0x87,
|
||||
0xe6, 0x00, 0x7c, 0x99, 0x33, 0xc9, 0x87, 0x3f, 0xe6, 0x00, 0x7c, 0xf8, 0x30, 0xcf, 0x8f, 0x8f,
|
||||
0xff, 0xff, 0xfc, 0x99, 0x33, 0xc9, 0x87, 0xe7, 0xff, 0xff, 0xfe, 0x39, 0x30, 0xe3, 0x93, 0x0f,
|
||||
0xe6, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe6, 0x00, 0x6f, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xcf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf9, 0x9c, 0x3c, 0x78, 0x70, 0xc3, 0x0f,
|
||||
0xe6, 0x0d, 0x3c, 0x99, 0x33, 0xe7, 0xcf, 0x27, 0xe6, 0x04, 0x7c, 0x38, 0x38, 0xf1, 0xc3, 0x27,
|
||||
0xff, 0xfe, 0xfc, 0xf9, 0x3e, 0x7c, 0xcf, 0x27, 0xff, 0xff, 0xfc, 0xf9, 0x30, 0xe1, 0xc3, 0x0f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_frame [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x7f, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x3f, 0xff, 0xf0, 0x40, 0x02, 0x0f, 0xff, 0xfc,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x1e, 0x40, 0x02, 0x78, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x3f, 0xff, 0xf2, 0x40, 0x02, 0x4f, 0xff, 0xfc,
|
||||
0x00, 0x00, 0x02, 0x40, 0x02, 0x40, 0x00, 0x00, 0x00, 0x00, 0x03, 0xc0, 0x03, 0xc0, 0x00, 0x00,
|
||||
0x00, 0x00, 0x02, 0x40, 0x02, 0x40, 0x00, 0x00, 0x3f, 0xff, 0xf2, 0x40, 0x02, 0x4f, 0xff, 0xfc,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x1e, 0x40, 0x02, 0x78, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x3f, 0xff, 0xf0, 0x40, 0x02, 0x0f, 0xff, 0xfc,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfe, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x1c,
|
||||
0x00, 0x00, 0x01, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0x20, 0x00, 0x00, 0x00, 0x18,
|
||||
0x00, 0x00, 0x01, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0xa0, 0x00, 0x00, 0x00, 0x38,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xaa, 0x8a, 0xaa, 0x80
|
||||
};
|
||||
|
||||
const unsigned char bm_online [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc2, 0x1c, 0x66, 0x61, 0x8c, 0x24, 0x90, 0x87,
|
||||
0xe6, 0x49, 0x22, 0x4f, 0x24, 0xe4, 0x93, 0x93, 0xe6, 0x18, 0x20, 0x63, 0x3c, 0x26, 0x30, 0x87,
|
||||
0xe6, 0x19, 0x24, 0x79, 0x24, 0xe6, 0x33, 0x87, 0xe6, 0x49, 0x26, 0x43, 0x8c, 0x27, 0x70, 0x93,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf1, 0xe6, 0x73, 0xe7, 0x33, 0x87, 0xff,
|
||||
0xff, 0xe4, 0xe2, 0x73, 0xe7, 0x13, 0x9f, 0xff, 0xff, 0xe4, 0xe0, 0x73, 0xe7, 0x03, 0x87, 0xff,
|
||||
0xff, 0xe4, 0xe4, 0x73, 0xe7, 0x23, 0x9f, 0xff, 0xff, 0xf1, 0xe6, 0x70, 0xe7, 0x33, 0x87, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_fw_corrupt [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x30, 0xe7, 0x33, 0x9c, 0x70, 0xe1, 0xff,
|
||||
0xcf, 0x32, 0x62, 0x32, 0x99, 0x32, 0x67, 0xff, 0xc3, 0x30, 0xe0, 0x32, 0x98, 0x30, 0xe1, 0xff,
|
||||
0xcf, 0x30, 0xe5, 0x30, 0x19, 0x30, 0xe7, 0xff, 0xcf, 0x32, 0x67, 0x39, 0x39, 0x32, 0x61, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xc7, 0x0e, 0x1c, 0x98, 0x70, 0xfc, 0xff,
|
||||
0xc9, 0x93, 0x26, 0x4c, 0x99, 0x39, 0xfb, 0x7f, 0xcf, 0x93, 0x0e, 0x1c, 0x98, 0x79, 0xfb, 0x7f,
|
||||
0xc9, 0x93, 0x0e, 0x1c, 0x99, 0xf9, 0xf7, 0xbf, 0xe3, 0xc7, 0x26, 0x4e, 0x39, 0xf9, 0xf4, 0xbf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbf, 0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbc, 0xf7,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7c, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xfb,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_plug [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x7f, 0x80, 0x55, 0xfc, 0x00, 0xaa, 0xfc, 0x00, 0x00,
|
||||
0x7f, 0x80, 0x00, 0x1c, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_hg_low [] PROGMEM = {
|
||||
0xf8, 0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0xf8, 0xf8
|
||||
};
|
||||
|
||||
const unsigned char bm_hg_high [] PROGMEM = {
|
||||
0xf8, 0x88, 0xf8, 0x70, 0x20, 0x70, 0xf8, 0xf8, 0xf8
|
||||
};
|
||||
|
||||
const unsigned char bm_n_uh [] PROGMEM = {
|
||||
0x07, 0x27, 0x27, 0x27, 0x07, 0x8f, 0x8f, 0xcf, 0xcf, 0xcf, 0x07, 0xe7, 0x07, 0x3f, 0x07, 0x07,
|
||||
0xe7, 0xc7, 0xe7, 0x07, 0x27, 0x27, 0x07, 0xe7, 0xe7, 0x07, 0x3f, 0x07, 0xe7, 0x07, 0x07, 0x3f,
|
||||
0x07, 0x27, 0x07, 0x07, 0xc7, 0xcf, 0x9f, 0x1f, 0x07, 0x27, 0x07, 0x27, 0x07, 0x07, 0x27, 0x07,
|
||||
0xe7, 0xe7
|
||||
};
|
||||
|
||||
const unsigned char bm_dot_sqr [] PROGMEM = {
|
||||
0xaa, 0xd5, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00,
|
||||
0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00,
|
||||
0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00,
|
||||
0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0xaa, 0xd5, 0x40
|
||||
};
|
||||
|
||||
#elif DISP_H == 122
|
||||
// use 122px wide graphics
|
||||
|
||||
const unsigned char bm_bt [] PROGMEM = {
|
||||
@ -1315,401 +1710,6 @@ const unsigned char bm_dot_sqr [] PROGMEM = {
|
||||
0xee, 0xdd, 0xdd, 0xc0
|
||||
};
|
||||
|
||||
#else
|
||||
|
||||
// use 64px wide graphics
|
||||
|
||||
const unsigned char bm_cable [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x1c, 0x00, 0x38, 0x07, 0xfc, 0x08, 0x38, 0x10, 0x1c, 0x10, 0x00, 0x08, 0x00,
|
||||
0x07, 0xc0, 0x00, 0x20, 0x00, 0x10, 0x00, 0x10, 0x00, 0x20, 0x07, 0xc0, 0x08, 0x00, 0x10, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x04, 0x80, 0x04, 0x43, 0x08, 0x46,
|
||||
0xf1, 0x8f, 0x02, 0x16, 0x02, 0x23, 0x01, 0x20, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_bt [] PROGMEM = {
|
||||
0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x11, 0x40, 0x00, 0x00, 0x05, 0x10, 0x00, 0x00, 0x01, 0x40,
|
||||
0x00, 0x00, 0x01, 0x40, 0x00, 0x00, 0x05, 0x10, 0x00, 0x00, 0x11, 0x40, 0x00, 0x00, 0x01, 0x00,
|
||||
0x00, 0x00, 0x01, 0x00, 0x01, 0x80, 0x01, 0x40, 0x09, 0x20, 0x05, 0x10, 0x03, 0x20, 0x01, 0x40,
|
||||
0x01, 0x80, 0x01, 0x40, 0x03, 0x20, 0x05, 0x10, 0x09, 0x20, 0x01, 0x40, 0x01, 0x80, 0x01, 0x00,
|
||||
0x00, 0x00, 0x01, 0x00, 0x01, 0x80, 0x01, 0x40, 0x09, 0x20, 0x05, 0x10, 0x03, 0x20, 0x01, 0x40,
|
||||
0x29, 0x94, 0x01, 0x40, 0x03, 0x20, 0x05, 0x10, 0x09, 0x20, 0x01, 0x40, 0x01, 0x80, 0x01, 0x00,
|
||||
0x00, 0x00, 0x01, 0x00, 0x01, 0x80, 0x01, 0x40, 0x09, 0x20, 0x05, 0x10, 0x03, 0x20, 0x11, 0x48,
|
||||
0x29, 0x94, 0x11, 0x48, 0x03, 0x20, 0x05, 0x10, 0x09, 0x20, 0x01, 0x40, 0x01, 0x80, 0x01, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_rf [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4e, 0xc4,
|
||||
0x4a, 0xaa, 0x4a, 0xce, 0x6e, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x07, 0xe0, 0x08, 0x10, 0x13, 0xc8, 0x04, 0x20, 0x01, 0x80, 0x00, 0x00, 0x4e, 0xc4,
|
||||
0x4a, 0xaa, 0x4a, 0xce, 0x6e, 0xaa, 0x00, 0x00, 0x01, 0x80, 0x04, 0x20, 0x03, 0xc0, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x71, 0x4e,
|
||||
0x31, 0x48, 0x61, 0xca, 0x74, 0x4e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x07, 0xe0, 0x08, 0x10, 0x13, 0xc8, 0x04, 0x20, 0x01, 0x80, 0x00, 0x00, 0x71, 0x4e,
|
||||
0x31, 0x48, 0x61, 0xca, 0x74, 0x4e, 0x00, 0x00, 0x01, 0x80, 0x04, 0x20, 0x03, 0xc0, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_boot [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xfc, 0x38, 0x66, 0x67, 0x1c, 0x3f, 0xff, 0xff, 0xfc, 0x99, 0xe6, 0x66, 0x4c, 0xff, 0xff,
|
||||
0xff, 0xfc, 0x98, 0x70, 0xe6, 0x7c, 0x3f, 0xff, 0xff, 0xfc, 0x99, 0xf0, 0xe6, 0x4c, 0xff, 0xff,
|
||||
0xff, 0xfc, 0x38, 0x79, 0xe7, 0x1c, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0x0c, 0x38, 0xe1, 0xc3, 0x33, 0x38, 0x7f, 0xfe, 0x7e, 0x72, 0x64, 0xe7, 0x31, 0x33, 0xff,
|
||||
0xff, 0x1e, 0x70, 0x61, 0xe7, 0x30, 0x32, 0x7f, 0xff, 0xce, 0x72, 0x61, 0xe7, 0x32, 0x32, 0x7f,
|
||||
0xfe, 0x1e, 0x72, 0x64, 0xe7, 0x33, 0x38, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_no_radio [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0xc7, 0x0e, 0x71, 0xfc, 0xce, 0x38, 0x7f,
|
||||
0xc9, 0x93, 0x26, 0x64, 0xfc, 0x4c, 0x9c, 0xff, 0xc3, 0x83, 0x26, 0x64, 0xfc, 0x0c, 0x9c, 0xff,
|
||||
0xc3, 0x93, 0x26, 0x64, 0xfc, 0x8c, 0x9c, 0xff, 0xc9, 0x93, 0x0e, 0x71, 0xfc, 0xce, 0x3c, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x8e, 0x4c, 0xcc, 0x3f, 0xff, 0xfc, 0xff,
|
||||
0xcf, 0x26, 0x4c, 0x4c, 0x9f, 0xff, 0xfb, 0x7f, 0xc3, 0x26, 0x4c, 0x0c, 0x9f, 0xff, 0xfb, 0x7f,
|
||||
0xcf, 0x26, 0x4c, 0x8c, 0x9f, 0xff, 0xf7, 0xbf, 0xcf, 0x8f, 0x1c, 0xcc, 0x3f, 0xff, 0xf4, 0xbf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbf, 0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbc, 0xf7,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7c, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xfb,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_hwfail [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe4, 0xe3, 0x87, 0x0e, 0x73, 0x8e, 0x1c, 0x3f,
|
||||
0xe4, 0xc9, 0x93, 0x26, 0x53, 0x26, 0x4c, 0xff, 0xe0, 0xc1, 0x87, 0x26, 0x53, 0x06, 0x1c, 0x3f,
|
||||
0xe4, 0xc9, 0x87, 0x26, 0x03, 0x26, 0x1c, 0xff, 0xe4, 0xc9, 0x93, 0x0f, 0x27, 0x26, 0x4c, 0x3f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xe1, 0xc7, 0x33, 0xc9, 0x87, 0x0f, 0xf9, 0xff, 0xe7, 0x93, 0x33, 0xc9, 0x93, 0x3f, 0xf6, 0xff,
|
||||
0xe1, 0x83, 0x33, 0xc9, 0x87, 0x0f, 0xf6, 0xff, 0xe7, 0x93, 0x33, 0xc9, 0x87, 0x3f, 0xef, 0x7f,
|
||||
0xe7, 0x93, 0x30, 0xe3, 0x93, 0x0f, 0xe9, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xd9, 0xbf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xd9, 0xbf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb9, 0xdf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb9, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xef,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x79, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xf9, 0xf7,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x0f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_console [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff,
|
||||
0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff, 0xff, 0x1f, 0xcf, 0xff, 0xff, 0xf3, 0xf8, 0xff,
|
||||
0xfe, 0x3f, 0x9f, 0xff, 0xff, 0xf9, 0xfc, 0x7f, 0xfc, 0x7f, 0x99, 0xe6, 0x61, 0x99, 0xfe, 0x3f,
|
||||
0xf8, 0xe7, 0x99, 0x26, 0x67, 0x99, 0xe7, 0x1f, 0xf9, 0xc7, 0x99, 0x26, 0x61, 0x99, 0xe3, 0x9f,
|
||||
0xf1, 0x8f, 0x98, 0x06, 0x67, 0x99, 0xf1, 0x8f, 0xf3, 0x9f, 0x9c, 0xce, 0x67, 0x99, 0xf9, 0xcf,
|
||||
0xf3, 0x99, 0x9f, 0xff, 0xff, 0xf9, 0x99, 0xcf, 0xf3, 0x99, 0x9f, 0xff, 0xff, 0xf9, 0x99, 0xcf,
|
||||
0xf3, 0x9f, 0x9f, 0xe3, 0x83, 0xf9, 0xf9, 0xcf, 0xf1, 0x8f, 0x9f, 0xc9, 0x93, 0xf9, 0xf1, 0x8f,
|
||||
0xf9, 0xc7, 0x9f, 0xc1, 0x83, 0xf9, 0xe3, 0x9f, 0xf8, 0xe7, 0x9f, 0xc9, 0x9f, 0xf9, 0xe7, 0x1f,
|
||||
0xfc, 0x7f, 0x9f, 0xc9, 0x9f, 0xf9, 0xfe, 0x3f, 0xfe, 0x3f, 0x9f, 0xff, 0xff, 0xf9, 0xfc, 0x7f,
|
||||
0xff, 0x1f, 0xcf, 0xff, 0xff, 0xf3, 0xf8, 0xff, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff,
|
||||
0xff, 0xff, 0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff,
|
||||
0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xfd, 0xff, 0x7f, 0xdf, 0xf7, 0xfd, 0xff, 0x7f,
|
||||
0xfd, 0xff, 0x7f, 0xdf, 0xf7, 0xfd, 0xff, 0x7f, 0xfd, 0xff, 0x7f, 0xdf, 0xf7, 0xfd, 0xff, 0x7f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x78, 0x1e, 0x07, 0x81, 0xe0, 0x78, 0x1f,
|
||||
0xef, 0xbb, 0xee, 0xfb, 0xbe, 0xef, 0xbb, 0xef, 0xe8, 0xda, 0xb6, 0x9d, 0xb3, 0x6d, 0xda, 0x37,
|
||||
0xef, 0xda, 0xf6, 0xb5, 0xad, 0x6c, 0xdb, 0xf7, 0xe8, 0x5a, 0x36, 0x95, 0xad, 0x6c, 0xda, 0x97,
|
||||
0xef, 0xdb, 0xf6, 0x85, 0xb3, 0x6c, 0xda, 0x97, 0xea, 0x5a, 0x36, 0xb5, 0xb3, 0x6c, 0xdb, 0xf7,
|
||||
0xef, 0xda, 0xf6, 0xa5, 0xad, 0x6f, 0xda, 0x57, 0xe8, 0x5a, 0xb6, 0x85, 0xad, 0x6c, 0xda, 0x57,
|
||||
0xef, 0xdb, 0xf6, 0xfd, 0xbf, 0x6f, 0xdb, 0xf7, 0xe0, 0x18, 0x06, 0x01, 0x80, 0x60, 0x18, 0x07,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xfe, 0x42, 0x7c, 0x60, 0xf0, 0x78, 0x3c, 0x7f, 0xfe, 0x4a, 0x7c, 0x64, 0xf2, 0x79, 0x3c, 0x7f,
|
||||
0xfe, 0x43, 0xfe, 0x64, 0xf2, 0x79, 0x3e, 0x7f, 0xfe, 0x4e, 0x7e, 0x64, 0x92, 0x49, 0x26, 0x7f,
|
||||
0xfe, 0x4e, 0x7e, 0x60, 0x90, 0x48, 0x26, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_pairing [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xf0, 0xe3, 0x98, 0x73, 0x33, 0x87, 0xff, 0xff, 0xf2, 0xc9, 0x99, 0x33, 0x13, 0x3f, 0xff,
|
||||
0xff, 0xf0, 0xc1, 0x98, 0x73, 0x03, 0x27, 0xff, 0xff, 0xf3, 0xc9, 0x98, 0x73, 0x23, 0x27, 0xff,
|
||||
0xff, 0xf3, 0xc9, 0x99, 0x33, 0x33, 0x8f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_fw_update [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xfc, 0x98, 0x70, 0xf1, 0xc3, 0x33, 0x38, 0x7f, 0xfc, 0x99, 0x32, 0x64, 0xe7, 0x31, 0x33, 0xff,
|
||||
0xfc, 0x98, 0x72, 0x60, 0xe7, 0x30, 0x32, 0x7f, 0xfc, 0x99, 0xf2, 0x64, 0xe7, 0x32, 0x32, 0x7f,
|
||||
0xfe, 0x39, 0xf0, 0xe4, 0xe7, 0x33, 0x38, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xf8, 0x66, 0x1c, 0xe6, 0x73, 0x8e, 0x1c, 0x3f, 0xf9, 0xe6, 0x4c, 0x46, 0x53, 0x26, 0x4c, 0xff,
|
||||
0xf8, 0x66, 0x1c, 0x06, 0x53, 0x06, 0x1c, 0x3f, 0xf9, 0xe6, 0x1c, 0xa6, 0x03, 0x26, 0x1c, 0xff,
|
||||
0xf9, 0xe6, 0x4c, 0xe7, 0x27, 0x26, 0x4c, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_version [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0x99, 0x86, 0x1e, 0x19, 0xc7, 0x33, 0xff, 0xff, 0x99, 0x9e, 0x4c, 0xf9, 0x93, 0x13, 0xff,
|
||||
0xff, 0xc3, 0x86, 0x1e, 0x39, 0x93, 0x03, 0xff, 0xff, 0xc3, 0x9e, 0x1f, 0x99, 0x93, 0x23, 0xff,
|
||||
0xff, 0xe7, 0x86, 0x4c, 0x39, 0xc7, 0x33, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_updating [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xf1, 0xff, 0x71, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x7f, 0xf5, 0xff, 0x75, 0x7f, 0xff, 0xff, 0xff, 0x7f, 0xf1, 0xff, 0x71, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x17, 0xd4, 0x7f, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x57, 0xd5, 0x7f, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x17, 0xd4, 0x7f, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x47, 0x44, 0x71, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x57, 0x55, 0x75, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x47, 0x44, 0x71, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x44, 0x51, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x44, 0x51, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x14, 0x54, 0x45, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x14, 0x54, 0x45, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff,
|
||||
0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x01, 0xff, 0xff,
|
||||
0xff, 0xff, 0x60, 0x00, 0x00, 0x03, 0x7f, 0xff, 0xff, 0xff, 0x30, 0x00, 0x00, 0x07, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xf8, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x5c, 0x00, 0x00, 0x1c, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x56, 0x00, 0x00, 0x35, 0x7f, 0xff, 0xff, 0xff, 0x57, 0x00, 0x00, 0x74, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0x80, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x44, 0xc0, 0x01, 0xd1, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x60, 0x03, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x44, 0x70, 0x07, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0x14, 0x5c, 0x1d, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x56, 0x35, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x14, 0x57, 0xe5, 0x44, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x55, 0x55, 0x55, 0x55, 0x7f, 0xff, 0xff, 0xff, 0x45, 0x44, 0x51, 0x51, 0x7f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff,
|
||||
0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff,
|
||||
0xff, 0xff, 0x80, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
static unsigned char bm_def[] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb4, 0x61, 0x10, 0x8c, 0x23, 0xc4, 0x3f, 0xff,
|
||||
0xb5, 0xa7, 0xb7, 0xb5, 0xed, 0xed, 0xbf, 0xff, 0xb5, 0xb9, 0xb4, 0xb4, 0x6d, 0xed, 0xbf, 0xff,
|
||||
0x85, 0xa1, 0x10, 0xb4, 0x21, 0x44, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0xe7, 0x1c, 0xfe, 0x7f, 0x8f, 0xf0, 0x00,
|
||||
0x1f, 0xf7, 0x9d, 0xff, 0x7f, 0x9f, 0xf0, 0x00, 0x1c, 0x77, 0xfd, 0xc7, 0x73, 0xdc, 0x00, 0x00,
|
||||
0x1f, 0xe7, 0xfd, 0xc7, 0x71, 0xdf, 0x00, 0x00, 0x1f, 0xe7, 0x7d, 0xc7, 0x71, 0xdf, 0x00, 0x00,
|
||||
0x1c, 0x77, 0x3d, 0xc7, 0x73, 0xdc, 0x00, 0x00, 0x1c, 0x77, 0x1d, 0xff, 0x7f, 0x9f, 0xf0, 0x00,
|
||||
0x1c, 0x77, 0x1c, 0xfe, 0x7f, 0x0f, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x54,
|
||||
0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x62, 0x24, 0x49, 0x22, 0x4e, 0x44,
|
||||
0x00, 0x24, 0x93, 0x66, 0xc9, 0x32, 0x44, 0x28, 0x00, 0x20, 0x92, 0xa5, 0x49, 0x2a, 0x44, 0x10,
|
||||
0x00, 0x24, 0x92, 0x24, 0x49, 0x26, 0x44, 0x10, 0x00, 0x18, 0x62, 0x24, 0x46, 0x22, 0x44, 0x10,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x1c, 0x9c, 0x44, 0x88, 0xc7, 0x1c, 0x00, 0x00, 0x10, 0x92, 0x6c, 0xa9, 0x24, 0x90,
|
||||
0x00, 0x00, 0x1c, 0x9c, 0x54, 0xa9, 0xe7, 0x1c, 0x00, 0x00, 0x10, 0x94, 0x44, 0xa9, 0x25, 0x10,
|
||||
0x00, 0x00, 0x10, 0x92, 0x44, 0x51, 0x24, 0x9c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_def_lc [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xb4, 0x61, 0x10, 0x8c, 0x23, 0xc4, 0x3f, 0xff,
|
||||
0xb5, 0xa7, 0xb7, 0xb5, 0xed, 0xed, 0xbf, 0xff, 0xb5, 0xb9, 0xb4, 0xb4, 0x6d, 0xed, 0xbf, 0xff,
|
||||
0x85, 0xa1, 0x10, 0xb4, 0x21, 0x44, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0xe7, 0x1c, 0xfe, 0x7f, 0x8f, 0xf0, 0x00,
|
||||
0x1f, 0xf7, 0x9d, 0xff, 0x7f, 0x9f, 0xf0, 0x00, 0x1c, 0x77, 0xfd, 0xc7, 0x73, 0xdc, 0x00, 0x00,
|
||||
0x1f, 0xe7, 0xfd, 0xc7, 0x71, 0xdf, 0x00, 0x00, 0x1f, 0xe7, 0x7d, 0xc7, 0x71, 0xdf, 0x00, 0x00,
|
||||
0x1c, 0x77, 0x3d, 0xc7, 0x73, 0xdc, 0x00, 0x00, 0x1c, 0x77, 0x1d, 0xff, 0x7f, 0x9f, 0xf0, 0x00,
|
||||
0x1c, 0x77, 0x1c, 0xfe, 0x7f, 0x0f, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x54,
|
||||
0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x8e, 0x39, 0x10, 0x61, 0x88, 0x91, 0x1c,
|
||||
0x02, 0x49, 0x21, 0x90, 0x92, 0x4d, 0x9b, 0x20, 0x02, 0x4e, 0x39, 0x50, 0x82, 0x4a, 0x95, 0x18,
|
||||
0x02, 0x48, 0x21, 0x30, 0x92, 0x48, 0x91, 0x04, 0x01, 0x88, 0x39, 0x10, 0x61, 0x88, 0x91, 0x38,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x01, 0xc8, 0x8e, 0x73, 0x91, 0x1c, 0x00, 0x00, 0x02, 0x05, 0x10, 0x22, 0x1b, 0x20,
|
||||
0x00, 0x00, 0x01, 0x82, 0x0c, 0x23, 0x95, 0x18, 0x00, 0x00, 0x00, 0x42, 0x02, 0x22, 0x11, 0x04,
|
||||
0x00, 0x00, 0x03, 0x82, 0x1c, 0x23, 0x91, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_hwok [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xf2, 0x71, 0xc3, 0x87, 0x39, 0xc7, 0x0e, 0x1f, 0xf2, 0x64, 0xc9, 0x93, 0x29, 0x93, 0x26, 0x7f,
|
||||
0xf0, 0x60, 0xc3, 0x93, 0x29, 0x83, 0x0e, 0x1f, 0xf2, 0x64, 0xc3, 0x93, 0x01, 0x93, 0x0e, 0x7f,
|
||||
0xf2, 0x64, 0xc9, 0x87, 0x93, 0x93, 0x26, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0x33, 0x30, 0xff, 0x8e, 0x4f, 0xff,
|
||||
0xff, 0xf3, 0x13, 0x39, 0xff, 0x26, 0x1f, 0xff, 0xff, 0xf3, 0x03, 0x39, 0xff, 0x26, 0x3f, 0xff,
|
||||
0xff, 0xf3, 0x23, 0x39, 0xff, 0x26, 0x1f, 0xff, 0xff, 0xf3, 0x33, 0x39, 0xff, 0x8e, 0x4f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xc3, 0x0e, 0x67, 0xf8, 0x70, 0xe3, 0x87, 0x33, 0xe7, 0x27, 0x0f, 0xf9, 0x33, 0xc9, 0x93, 0x87,
|
||||
0xe7, 0x0f, 0x9f, 0xf8, 0x70, 0xc1, 0x93, 0xcf, 0xe7, 0x0f, 0x0f, 0xf8, 0x73, 0xc9, 0x93, 0xcf,
|
||||
0xe7, 0x26, 0x67, 0xf9, 0x30, 0xc9, 0x87, 0xcf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_console_active [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0x8e, 0x67, 0x0e, 0x39, 0xe1, 0xff,
|
||||
0xff, 0x93, 0x26, 0x26, 0x7c, 0x99, 0xe7, 0xff, 0xff, 0x9f, 0x26, 0x07, 0x1c, 0x99, 0xe1, 0xff,
|
||||
0xff, 0x93, 0x26, 0x47, 0xcc, 0x99, 0xe7, 0xff, 0xff, 0xc7, 0x8e, 0x66, 0x1e, 0x38, 0x61, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3c, 0x70, 0xcc, 0xcc, 0x3f, 0xff,
|
||||
0xff, 0xfc, 0x99, 0x39, 0xcc, 0xcc, 0xff, 0xff, 0xff, 0xfc, 0x19, 0xf9, 0xce, 0x1c, 0x3f, 0xff,
|
||||
0xff, 0xfc, 0x99, 0x39, 0xce, 0x1c, 0xff, 0xff, 0xff, 0xfc, 0x9c, 0x79, 0xcf, 0x3c, 0x3f, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_checks [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x87, 0x0c, 0x99, 0xc7, 0x0f,
|
||||
0xe6, 0x00, 0x7f, 0x93, 0x3c, 0x99, 0x93, 0x3f, 0xe6, 0x00, 0x7f, 0x93, 0x0e, 0x39, 0x9f, 0x0f,
|
||||
0xff, 0xff, 0xff, 0x93, 0x3e, 0x39, 0x93, 0x3f, 0xff, 0xff, 0xff, 0x87, 0x0f, 0x79, 0xc7, 0x0f,
|
||||
0xe6, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe6, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x39, 0x30, 0xe3, 0x93, 0x87,
|
||||
0xe6, 0x00, 0x7c, 0x99, 0x33, 0xc9, 0x87, 0x3f, 0xe6, 0x00, 0x7c, 0xf8, 0x30, 0xcf, 0x8f, 0x8f,
|
||||
0xff, 0xff, 0xfc, 0x99, 0x33, 0xc9, 0x87, 0xe7, 0xff, 0xff, 0xfe, 0x39, 0x30, 0xe3, 0x93, 0x0f,
|
||||
0xe6, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe6, 0x00, 0x6f, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xcf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf9, 0x9c, 0x3c, 0x78, 0x70, 0xc3, 0x0f,
|
||||
0xe6, 0x0d, 0x3c, 0x99, 0x33, 0xe7, 0xcf, 0x27, 0xe6, 0x04, 0x7c, 0x38, 0x38, 0xf1, 0xc3, 0x27,
|
||||
0xff, 0xfe, 0xfc, 0xf9, 0x3e, 0x7c, 0xcf, 0x27, 0xff, 0xff, 0xfc, 0xf9, 0x30, 0xe1, 0xc3, 0x0f,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_frame [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x7f, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x3f, 0xff, 0xf0, 0x40, 0x02, 0x0f, 0xff, 0xfc,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x1e, 0x40, 0x02, 0x78, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x3f, 0xff, 0xf2, 0x40, 0x02, 0x4f, 0xff, 0xfc,
|
||||
0x00, 0x00, 0x02, 0x40, 0x02, 0x40, 0x00, 0x00, 0x00, 0x00, 0x03, 0xc0, 0x03, 0xc0, 0x00, 0x00,
|
||||
0x00, 0x00, 0x02, 0x40, 0x02, 0x40, 0x00, 0x00, 0x3f, 0xff, 0xf2, 0x40, 0x02, 0x4f, 0xff, 0xfc,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04, 0x20, 0x00, 0x12, 0x40, 0x02, 0x48, 0x00, 0x04,
|
||||
0x20, 0x00, 0x1e, 0x40, 0x02, 0x78, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04,
|
||||
0x20, 0x00, 0x10, 0x40, 0x02, 0x08, 0x00, 0x04, 0x3f, 0xff, 0xf0, 0x40, 0x02, 0x0f, 0xff, 0xfc,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x40, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfe, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x1c,
|
||||
0x00, 0x00, 0x01, 0x20, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0x20, 0x00, 0x00, 0x00, 0x18,
|
||||
0x00, 0x00, 0x01, 0x40, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0xa0, 0x00, 0x00, 0x00, 0x38,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xaa, 0x8a, 0xaa, 0x80
|
||||
};
|
||||
|
||||
const unsigned char bm_online [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc2, 0x1c, 0x66, 0x61, 0x8c, 0x24, 0x90, 0x87,
|
||||
0xe6, 0x49, 0x22, 0x4f, 0x24, 0xe4, 0x93, 0x93, 0xe6, 0x18, 0x20, 0x63, 0x3c, 0x26, 0x30, 0x87,
|
||||
0xe6, 0x19, 0x24, 0x79, 0x24, 0xe6, 0x33, 0x87, 0xe6, 0x49, 0x26, 0x43, 0x8c, 0x27, 0x70, 0x93,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf1, 0xe6, 0x73, 0xe7, 0x33, 0x87, 0xff,
|
||||
0xff, 0xe4, 0xe2, 0x73, 0xe7, 0x13, 0x9f, 0xff, 0xff, 0xe4, 0xe0, 0x73, 0xe7, 0x03, 0x87, 0xff,
|
||||
0xff, 0xe4, 0xe4, 0x73, 0xe7, 0x23, 0x9f, 0xff, 0xff, 0xf1, 0xe6, 0x70, 0xe7, 0x33, 0x87, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_fw_corrupt [] PROGMEM = {
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x30, 0xe7, 0x33, 0x9c, 0x70, 0xe1, 0xff,
|
||||
0xcf, 0x32, 0x62, 0x32, 0x99, 0x32, 0x67, 0xff, 0xc3, 0x30, 0xe0, 0x32, 0x98, 0x30, 0xe1, 0xff,
|
||||
0xcf, 0x30, 0xe5, 0x30, 0x19, 0x30, 0xe7, 0xff, 0xcf, 0x32, 0x67, 0x39, 0x39, 0x32, 0x61, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xc7, 0x0e, 0x1c, 0x98, 0x70, 0xfc, 0xff,
|
||||
0xc9, 0x93, 0x26, 0x4c, 0x99, 0x39, 0xfb, 0x7f, 0xcf, 0x93, 0x0e, 0x1c, 0x98, 0x79, 0xfb, 0x7f,
|
||||
0xc9, 0x93, 0x0e, 0x1c, 0x99, 0xf9, 0xf7, 0xbf, 0xe3, 0xc7, 0x26, 0x4e, 0x39, 0xf9, 0xf4, 0xbf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xec, 0xdf,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdc, 0xef,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbf, 0xf7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbc, 0xf7,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7c, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xfb,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
||||
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned char bm_plug [] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x7f, 0x80, 0x55, 0xfc, 0x00, 0xaa, 0xfc, 0x00, 0x00,
|
||||
0x7f, 0x80, 0x00, 0x1c, 0x00
|
||||
};
|
||||
|
||||
const unsigned char bm_hg_low [] PROGMEM = {
|
||||
0xf8, 0x88, 0x88, 0x50, 0x20, 0x50, 0x88, 0xf8, 0xf8
|
||||
};
|
||||
|
||||
const unsigned char bm_hg_high [] PROGMEM = {
|
||||
0xf8, 0x88, 0xf8, 0x70, 0x20, 0x70, 0xf8, 0xf8, 0xf8
|
||||
};
|
||||
|
||||
const unsigned char bm_n_uh [] PROGMEM = {
|
||||
0x07, 0x27, 0x27, 0x27, 0x07, 0x8f, 0x8f, 0xcf, 0xcf, 0xcf, 0x07, 0xe7, 0x07, 0x3f, 0x07, 0x07,
|
||||
0xe7, 0xc7, 0xe7, 0x07, 0x27, 0x27, 0x07, 0xe7, 0xe7, 0x07, 0x3f, 0x07, 0xe7, 0x07, 0x07, 0x3f,
|
||||
0x07, 0x27, 0x07, 0x07, 0xc7, 0xcf, 0x9f, 0x1f, 0x07, 0x27, 0x07, 0x27, 0x07, 0x07, 0x27, 0x07,
|
||||
0xe7, 0xe7
|
||||
};
|
||||
|
||||
const unsigned char bm_dot_sqr [] PROGMEM = {
|
||||
0xaa, 0xd5, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00,
|
||||
0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00,
|
||||
0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x00,
|
||||
0x80, 0x00, 0x40, 0x00, 0x00, 0x00, 0xaa, 0xd5, 0x40
|
||||
};
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 5.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 3.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 1.6 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 509 B |
Binary file not shown.
|
Before Width: | Height: | Size: 513 B |
Binary file not shown.
|
Before Width: | Height: | Size: 1.2 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 418 B |
Binary file not shown.
|
Before Width: | Height: | Size: 3.1 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
339
Makefile
339
Makefile
@ -1,4 +1,4 @@
|
||||
# Copyright (C) 2024, Mark Qvist
|
||||
# Copyright (C) 2023, Mark Qvist
|
||||
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
@ -13,214 +13,179 @@
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
||||
# Version 2.0.17 of the Arduino ESP core is based on ESP-IDF v4.4.7
|
||||
ARDUINO_ESP_CORE_VER = 2.0.17
|
||||
|
||||
V ?= 0
|
||||
VFLAG =
|
||||
ifeq "$(V)" "1"
|
||||
VFLAG =-v
|
||||
endif
|
||||
|
||||
COMMON_BUILD_FLAGS = $(VFLAG) -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152"
|
||||
COMMON_ESP_UPLOAD_FlAGS = $(VFLAG) --chip esp32 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000
|
||||
ESP_IDF_VER = 2.0.17
|
||||
|
||||
all: release
|
||||
|
||||
clean:
|
||||
-rm -rf ./build
|
||||
-rm -f ./Release/rnode_firmware*
|
||||
-rm -r ./build
|
||||
-rm ./Release/rnode_firmware*
|
||||
|
||||
prep: prep-esp32 prep-nrf
|
||||
|
||||
prep-index:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
prep: prep-esp32 prep-nrf prep-samd
|
||||
|
||||
prep-esp32:
|
||||
arduino-cli core install esp32:esp32@$(ARDUINO_ESP_CORE_VER) --config-file arduino-cli.yaml
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install esp32:esp32@2.0.17 --config-file arduino-cli.yaml
|
||||
arduino-cli lib install "Adafruit SSD1306"
|
||||
arduino-cli lib install "Adafruit SH110X"
|
||||
arduino-cli lib install "Adafruit ST7735 and ST7789 Library"
|
||||
arduino-cli lib install "Adafruit NeoPixel"
|
||||
arduino-cli lib install "XPowersLib"
|
||||
arduino-cli lib install "Crypto"
|
||||
arduino-cli lib install "Adafruit NeoPixel"
|
||||
pip install pyserial rns --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
||||
|
||||
prep-samd:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install adafruit:samd --config-file arduino-cli.yaml
|
||||
|
||||
prep-nrf:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install adafruit:nrf52 --config-file arduino-cli.yaml
|
||||
arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
|
||||
arduino-cli lib install "Crypto"
|
||||
arduino-cli lib install "Adafruit GFX Library"
|
||||
arduino-cli lib install "GxEPD2"
|
||||
pip install pyserial rns --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
||||
pip install pyserial rns --upgrade --user --break-system-packages
|
||||
pip install adafruit-nrfutil --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
||||
|
||||
console-site:
|
||||
make -C Console clean site
|
||||
|
||||
spiffs: console-site spiffs-image
|
||||
spiffs: console-site spiffs-image
|
||||
|
||||
spiffs-image:
|
||||
python3 Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin
|
||||
|
||||
upload-spiffs:
|
||||
@echo Deploying SPIFFS image...
|
||||
python ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
firmware: $(shell grep ^firmware- Makefile | cut -d: -f1)
|
||||
firmware-tbeam:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
||||
|
||||
check_bt_buffers:
|
||||
@./esp32_btbufs.py ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/libraries/BluetoothSerial/src/BluetoothSerial.cpp
|
||||
|
||||
firmware-tbeam: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DBOARD_VARIANT=0xE4\""
|
||||
|
||||
firmware-tbeam_sx1262: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DBOARD_VARIANT=0xE8\""
|
||||
firmware-tbeam_sx126x:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
|
||||
firmware-techo: firmware-techo4 firmware-techo9
|
||||
|
||||
firmware-techo4:
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x16\""
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x16\""
|
||||
|
||||
firmware-techo9:
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x17\""
|
||||
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x17\""
|
||||
|
||||
firmware-t3s3:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xAB\""
|
||||
|
||||
firmware-t3s3_sx126x:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\""
|
||||
firmware-t3s3_sx1262:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\""
|
||||
|
||||
firmware-t3s3_sx1280_pa:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xAB\""
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\""
|
||||
|
||||
firmware-e22_esp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\" \"-DEXTERNAL_LEDS=true\""
|
||||
firmware-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
|
||||
firmware-lora32_v10: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
firmware-lora32_v10_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v10_extled: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
firmware-lora32_v20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v20: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
firmware-lora32_v21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
|
||||
firmware-lora32_v21: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
firmware-lora32_v21_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-lora32_v21_extled: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
firmware-lora32_v21_tcxo:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
|
||||
firmware-lora32_v21_tcxo: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
firmware-heltec32_v2:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
|
||||
firmware-heltec32_v2: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
|
||||
firmware-heltec32_v2_extled: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
firmware-heltec32_v2_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
|
||||
firmware-heltec32_v3:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
|
||||
firmware-rnode_ng_20: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
firmware-rnode_ng_20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
|
||||
firmware-rnode_ng_21: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
firmware-rnode_ng_21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
|
||||
firmware-featheresp32: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
firmware-featheresp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
|
||||
firmware-genericesp32: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
firmware-genericesp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
|
||||
firmware-rak4631:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
|
||||
firmware-rak4631_sx1280:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
|
||||
firmware-opencom-xl:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x52\" \"-DBOARD_VARIANT=0x21\""
|
||||
firmware-freenode:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x52\" \"-DBOARD_VARIANT=0x21\""
|
||||
|
||||
upload-tbeam:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:t-beam
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FLAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-techo:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn adafruit:nrf52:pca10056
|
||||
unzip -o build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.zip -d build/adafruit.nrf52.pca10056
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
||||
#rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
||||
../Reticulum/RNS/Utilities/rnodeconf.py $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
||||
|
||||
upload-lora32_v10:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-lora32_v20:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-lora32_v21:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-heltec32_v2:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V2
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-heltec32_v3:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V3
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) --chip esp32-s3 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-tdeck:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python ./Release/esptool/esptool.py --chip esp32-s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-tbeam_supreme:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python ./Release/esptool/esptool.py --chip esp32-s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32-s3 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-rnode_ng_20:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-rnode_ng_21:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-t3s3:
|
||||
@echo
|
||||
@ -228,7 +193,7 @@ upload-t3s3:
|
||||
@read
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3
|
||||
@sleep 2
|
||||
python ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
@echo
|
||||
@echo Press the RESET button on the board now, and hit enter
|
||||
@read
|
||||
@ -240,9 +205,9 @@ upload-featheresp32:
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/opencom_xl_firmware.ino.bin)
|
||||
@sleep 3
|
||||
python ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin
|
||||
python3 ./Release/esptool/esptool.py --chip esp32 --port $(or $(port), /dev/ttyUSB0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-opencom-xl:
|
||||
upload-freenode:
|
||||
arduino-cli upload -p /dev/ttyACM0 --fqbn rakwireless:nrf52:WisCoreRAK4631Board
|
||||
unzip -o build/rakwireless.nrf52.WisCoreRAK4631Board/opencom_xl_firmware.ino.zip -d build/rakwireless.nrf52.WisCoreRAK4631Board
|
||||
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/opencom_xl_firmware.ino.bin | grep -o '^\S*')
|
||||
@ -253,20 +218,15 @@ upload-opencom-xl:
|
||||
@sleep 3
|
||||
python3 rnodeconf.py /dev/ttyACM0 --set-firmware-length $$(ls -l ./build/rakwireless.nrf52.WisCoreRAK4631Board/opencom_xl_firmware.ino.bin | awk '{print $$5}')
|
||||
|
||||
upload-e22_esp32:
|
||||
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:esp32
|
||||
@sleep 1
|
||||
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin)
|
||||
@sleep 3
|
||||
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS) ./Release/console_image.bin
|
||||
release: release-all
|
||||
|
||||
release: console-site spiffs-image $(shell grep ^release- Makefile | cut -d: -f1)
|
||||
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes
|
||||
|
||||
release-hashes:
|
||||
python3 ./release_hashes.py > ./Release/release.json
|
||||
|
||||
release-tbeam: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DBOARD_VARIANT=0xE4\""
|
||||
release-tbeam:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam.boot_app0
|
||||
cp build/esp32.esp32.t-beam/opencom_xl_firmware.ino.bin build/rnode_firmware_tbeam.bin
|
||||
cp build/esp32.esp32.t-beam/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_tbeam.bootloader
|
||||
@ -274,8 +234,8 @@ release-tbeam: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_tbeam.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam.boot_app0 build/rnode_firmware_tbeam.bin build/rnode_firmware_tbeam.bootloader build/rnode_firmware_tbeam.partitions
|
||||
rm -r build
|
||||
|
||||
release-tbeam_sx1262: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DBOARD_MODEL=E8\""
|
||||
release-tbeam_sx1262:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_sx1262.boot_app0
|
||||
cp build/esp32.esp32.t-beam/opencom_xl_firmware.ino.bin build/rnode_firmware_tbeam_sx1262.bin
|
||||
cp build/esp32.esp32.t-beam/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_tbeam_sx1262.bootloader
|
||||
@ -283,8 +243,8 @@ release-tbeam_sx1262: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_tbeam_sx1262.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_sx1262.boot_app0 build/rnode_firmware_tbeam_sx1262.bin build/rnode_firmware_tbeam_sx1262.bootloader build/rnode_firmware_tbeam_sx1262.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v10: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
release-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_lora32v10.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
||||
@ -292,8 +252,8 @@ release-lora32_v10: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v20: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
|
||||
release-lora32_v20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_lora32v20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
||||
@ -301,8 +261,8 @@ release-lora32_v20: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_lora32v20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v21: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
release-lora32_v21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_lora32v21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
||||
@ -310,8 +270,8 @@ release-lora32_v21: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_lora32v21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v10_extled: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
release-lora32_v10_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_lora32v10.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
||||
@ -319,8 +279,8 @@ release-lora32_v10_extled: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v20_extled: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
release-lora32_v20_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_lora32v20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
||||
@ -328,8 +288,8 @@ release-lora32_v20_extled: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_lora32v20_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v21_extled: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
release-lora32_v21_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_lora32v21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
||||
@ -337,8 +297,8 @@ release-lora32_v21_extled: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_lora32v21_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v21_tcxo: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
release-lora32_v21_tcxo:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21_tcxo.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_lora32v21_tcxo.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_lora32v21_tcxo.bootloader
|
||||
@ -346,51 +306,53 @@ release-lora32_v21_tcxo: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_lora32v21_tcxo.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21_tcxo.boot_app0 build/rnode_firmware_lora32v21_tcxo.bin build/rnode_firmware_lora32v21_tcxo.bootloader build/rnode_firmware_lora32v21_tcxo.partitions
|
||||
rm -r build
|
||||
|
||||
release-heltec32_v2: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
release-heltec32_v2:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
|
||||
|
||||
release-heltec32_v3:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v3.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v3.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v3.bootloader
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v3.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_heltec32v3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v3.boot_app0 build/rnode_firmware_heltec32v3.bin build/rnode_firmware_heltec32v3.bootloader build/rnode_firmware_heltec32v3.partitions
|
||||
rm -r build
|
||||
|
||||
release-heltec32_v2_extled: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
|
||||
rm -r build
|
||||
|
||||
release-rnode_ng_20: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng20.bootloader
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng20.partitions
|
||||
release-heltec32_v3:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v3.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/opencom_xl_firmware.ino.bin build/rnode_firmware_heltec32v3.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_heltec32v3.bootloader
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V3/opencom_xl_firmware.ino.partitions.bin build/rnode_firmware_heltec32v3.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_heltec32v3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v3.boot_app0 build/rnode_firmware_heltec32v3.bin build/rnode_firmware_heltec32v3.bootloader build/rnode_firmware_heltec32v3.partitions
|
||||
rm -r build
|
||||
|
||||
release-heltec32_v2_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/opencom_xl_firmware.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
|
||||
rm -r build
|
||||
|
||||
release-rnode_ng_20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_ng20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_ng20.bootloader
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.partitions.bin build/rnode_firmware_ng20.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_ng20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng20.boot_app0 build/rnode_firmware_ng20.bin build/rnode_firmware_ng20.bootloader build/rnode_firmware_ng20.partitions
|
||||
rm -r build
|
||||
|
||||
release-rnode_ng_21: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng21.bootloader
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng21.partitions
|
||||
release-rnode_ng_21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bin build/rnode_firmware_ng21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_ng21.bootloader
|
||||
cp build/esp32.esp32.ttgo-lora32/opencom_xl_firmware.ino.partitions.bin build/rnode_firmware_ng21.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_ng21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng21.boot_app0 build/rnode_firmware_ng21.bin build/rnode_firmware_ng21.bootloader build/rnode_firmware_ng21.partitions
|
||||
rm -r build
|
||||
|
||||
release-t3s3:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_MODEL=0xAB\""
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/opencom_xl_firmware.ino.bin build/rnode_firmware_t3s3.bin
|
||||
cp build/esp32.esp32.esp32s3/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_t3s3.bootloader
|
||||
@ -398,45 +360,8 @@ release-t3s3:
|
||||
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
|
||||
rm -r build
|
||||
|
||||
release-e22_esp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_e22.boot_app0
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_e22.bin
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_e22.bootloader
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_esp32_e22.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_esp32_e22.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_e22.boot_app0 build/rnode_firmware_esp32_e22.bin build/rnode_firmware_esp32_e22.bootloader build/rnode_firmware_esp32_e22.partitions
|
||||
rm -r build
|
||||
|
||||
release-t3s3_sx126x:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_MODEL=0xA1\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3_sx126x.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3_sx126x.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3_sx126x.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3_sx126x.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_t3s3_sx126x.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3_sx126x.boot_app0 build/rnode_firmware_t3s3_sx126x.bin build/rnode_firmware_t3s3_sx126x.bootloader build/rnode_firmware_t3s3_sx126x.partitions
|
||||
rm -r build
|
||||
|
||||
release-tdeck:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tdeck.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tdeck.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tdeck.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tdeck.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_tdeck.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tdeck.boot_app0 build/rnode_firmware_tdeck.bin build/rnode_firmware_tdeck.bootloader build/rnode_firmware_tdeck.partitions
|
||||
rm -r build
|
||||
|
||||
release-tbeam_supreme:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3D\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_supreme.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tbeam_supreme.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam_supreme.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam_supreme.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_tbeam_supreme.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_supreme.boot_app0 build/rnode_firmware_tbeam_supreme.bin build/rnode_firmware_tbeam_supreme.bootloader build/rnode_firmware_tbeam_supreme.partitions
|
||||
rm -r build
|
||||
|
||||
|
||||
release-featheresp32: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
release-featheresp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
|
||||
cp build/esp32.esp32.featheresp32/opencom_xl_firmware.ino.bin build/rnode_firmware_featheresp32.bin
|
||||
cp build/esp32.esp32.featheresp32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_featheresp32.bootloader
|
||||
@ -444,8 +369,8 @@ release-featheresp32: check_bt_buffers
|
||||
zip --junk-paths ./Release/rnode_firmware_featheresp32.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_featheresp32.boot_app0 build/rnode_firmware_featheresp32.bin build/rnode_firmware_featheresp32.bootloader build/rnode_firmware_featheresp32.partitions
|
||||
rm -r build
|
||||
|
||||
release-genericesp32: check_bt_buffers
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
release-genericesp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_generic.boot_app0
|
||||
cp build/esp32.esp32.esp32/opencom_xl_firmware.ino.bin build/rnode_firmware_esp32_generic.bin
|
||||
cp build/esp32.esp32.esp32/opencom_xl_firmware.ino.bootloader.bin build/rnode_firmware_esp32_generic.bootloader
|
||||
@ -459,16 +384,12 @@ release-freenode:
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/opencom_xl_firmware.hex Release/rnode_firmware_opencom_xl.zip
|
||||
|
||||
release-rak4631:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631.hex
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/opencom_xl_firmware.ino.hex build/rnode_firmware_rak4631.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631.hex Release/rnode_firmware_rak4631.zip
|
||||
|
||||
release-rak4631_sx1280:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631_sx1280.hex
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/opencom_xl_firmware.ino.hex build/rnode_firmware_rak4631_sx1280.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631_sx1280.hex Release/rnode_firmware_rak4631_sx1280.zip
|
||||
|
||||
release-opencom-xl:
|
||||
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x52\" \"-DBOARD_VARIANT=0x21\""
|
||||
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_opencom_xl.hex
|
||||
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_opencom_xl.hex Release/rnode_firmware_opencom_xl.zip
|
||||
|
||||
250
Power.h
250
Power.h
@ -1,28 +1,9 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
// the Free Software Foundation, either version 3 of the License, or
|
||||
// (at your option) any later version.
|
||||
|
||||
// This program is distributed in the hope that it will be useful,
|
||||
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
// GNU General Public License for more details.
|
||||
|
||||
// You should have received a copy of the GNU General Public License
|
||||
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
||||
#if BOARD_MODEL == BOARD_TBEAM || BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#if BOARD_MODEL == BOARD_TBEAM
|
||||
#include <XPowersLib.h>
|
||||
XPowersLibInterface* PMU = NULL;
|
||||
|
||||
#ifndef PMU_WIRE_PORT
|
||||
#if BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#define PMU_WIRE_PORT Wire1
|
||||
#else
|
||||
#define PMU_WIRE_PORT Wire
|
||||
#endif
|
||||
#define PMU_WIRE_PORT Wire
|
||||
#endif
|
||||
|
||||
#define BAT_V_MIN 3.15
|
||||
@ -47,6 +28,8 @@
|
||||
pmuInterrupt = true;
|
||||
}
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1
|
||||
#define BAT_C_SAMPLES 7
|
||||
#define BAT_D_SAMPLES 2
|
||||
#define BAT_V_MIN 3.15
|
||||
#define BAT_V_MAX 4.3
|
||||
#define BAT_V_CHG 4.48
|
||||
@ -61,61 +44,26 @@
|
||||
int bat_charged_samples = 0;
|
||||
bool bat_voltage_dropping = false;
|
||||
float bat_delay_v = 0;
|
||||
float bat_state_change_v = 0;
|
||||
#elif BOARD_MODEL == BOARD_OPENCOM_XL
|
||||
#include "nrfx_power.h"
|
||||
#define BAT_C_SAMPLES 7
|
||||
#define BAT_D_SAMPLES 2
|
||||
#define BAT_V_MIN 2.75
|
||||
#define BAT_V_MAX 4.2
|
||||
#define BAT_V_FLOAT 4.22
|
||||
#define BAT_SAMPLES 5
|
||||
#define VBAT_MV_PER_LSB (0.73242188F) // 3.0V ADC range and 12 - bit ADC resolution = 3000mV / 4096
|
||||
#define VBAT_DIVIDER_COMP (1.73) // Compensation factor for the VBAT divider
|
||||
#define VBAT_MV_PER_LSB_FIN (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
||||
#define PIN_VBAT WB_A0
|
||||
float bat_p_samples[BAT_SAMPLES];
|
||||
float bat_v_samples[BAT_SAMPLES];
|
||||
uint8_t bat_samples_count = 0;
|
||||
int bat_discharging_samples = 0;
|
||||
int bat_charging_samples = 0;
|
||||
int bat_charged_samples = 0;
|
||||
bool bat_voltage_dropping = false;
|
||||
float bat_delay_v = 0;
|
||||
#elif BOARD_MODEL == BOARD_TDECK
|
||||
#define BAT_V_MIN 3.15
|
||||
#define BAT_V_MAX 4.3
|
||||
#define BAT_V_CHG 4.48
|
||||
#define BAT_V_FLOAT 4.33
|
||||
#define BAT_SAMPLES 5
|
||||
const uint8_t pin_vbat = 4;
|
||||
float bat_p_samples[BAT_SAMPLES];
|
||||
float bat_v_samples[BAT_SAMPLES];
|
||||
uint8_t bat_samples_count = 0;
|
||||
int bat_discharging_samples = 0;
|
||||
int bat_charging_samples = 0;
|
||||
int bat_charged_samples = 0;
|
||||
bool bat_voltage_dropping = false;
|
||||
float bat_delay_v = 0;
|
||||
float bat_state_change_v = 0;
|
||||
#elif BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
#define BAT_V_MIN 3.15
|
||||
#define BAT_V_MAX 4.3
|
||||
#define BAT_V_CHG 4.48
|
||||
#define BAT_V_FLOAT 4.33
|
||||
#define BAT_SAMPLES 7
|
||||
const uint8_t pin_vbat = 1;
|
||||
const uint8_t pin_ctrl = 37;
|
||||
float bat_p_samples[BAT_SAMPLES];
|
||||
float bat_v_samples[BAT_SAMPLES];
|
||||
uint8_t bat_samples_count = 0;
|
||||
int bat_discharging_samples = 0;
|
||||
int bat_charging_samples = 0;
|
||||
int bat_charged_samples = 0;
|
||||
bool bat_voltage_dropping = false;
|
||||
float bat_delay_v = 0;
|
||||
float bat_state_change_v = 0;
|
||||
>>>>>>> upstream/dev
|
||||
#elif BOARD_MODEL == BOARD_FREENODE
|
||||
#include "nrfx_power.h"
|
||||
#define BAT_C_SAMPLES 7
|
||||
#define BAT_D_SAMPLES 2
|
||||
#define BAT_V_MIN 2.75
|
||||
#define BAT_V_MAX 4.2
|
||||
#define BAT_V_FLOAT 4.22
|
||||
#define BAT_SAMPLES 5
|
||||
#define VBAT_MV_PER_LSB (0.73242188F) // 3.0V ADC range and 12 - bit ADC resolution = 3000mV / 4096
|
||||
#define VBAT_DIVIDER_COMP (1.73) // Compensation factor for the VBAT divider
|
||||
#define VBAT_MV_PER_LSB_FIN (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
||||
#define PIN_VBAT WB_A0
|
||||
float bat_p_samples[BAT_SAMPLES];
|
||||
float bat_v_samples[BAT_SAMPLES];
|
||||
uint8_t bat_samples_count = 0;
|
||||
int bat_discharging_samples = 0;
|
||||
int bat_charging_samples = 0;
|
||||
int bat_charged_samples = 0;
|
||||
bool bat_voltage_dropping = false;
|
||||
float bat_delay_v = 0;
|
||||
#endif
|
||||
|
||||
uint32_t last_pmu_update = 0;
|
||||
@ -126,17 +74,10 @@ uint8_t pmu_rc = 0;
|
||||
void kiss_indicate_battery();
|
||||
|
||||
void measure_battery() {
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_TDECK
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1
|
||||
battery_installed = true;
|
||||
battery_indeterminate = true;
|
||||
|
||||
#if BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.0041;
|
||||
#else
|
||||
float battery_measurement = (float)(analogRead(pin_vbat)) / 4095.0*2.0*3.3*1.1;
|
||||
#endif
|
||||
|
||||
bat_v_samples[bat_samples_count%BAT_SAMPLES] = battery_measurement;
|
||||
bat_v_samples[bat_samples_count%BAT_SAMPLES] = (float)(analogRead(pin_vbat)) / 4095*2*3.3*1.1;
|
||||
bat_p_samples[bat_samples_count%BAT_SAMPLES] = ((battery_voltage-BAT_V_MIN) / (BAT_V_MAX-BAT_V_MIN))*100.0;
|
||||
|
||||
bat_samples_count++;
|
||||
@ -159,60 +100,41 @@ void measure_battery() {
|
||||
battery_voltage = battery_voltage/BAT_SAMPLES;
|
||||
|
||||
if (bat_delay_v == 0) bat_delay_v = battery_voltage;
|
||||
if (bat_state_change_v == 0) bat_state_change_v = battery_voltage;
|
||||
if (battery_percent > 100.0) battery_percent = 100.0;
|
||||
if (battery_percent < 0.0) battery_percent = 0.0;
|
||||
|
||||
if (bat_samples_count%BAT_SAMPLES == 0) {
|
||||
float bat_delay_diff = bat_state_change_v-battery_voltage;
|
||||
if (bat_delay_diff < 0) { bat_delay_diff *= -1; }
|
||||
|
||||
if (battery_voltage < bat_delay_v && battery_voltage < BAT_V_FLOAT) {
|
||||
if (bat_voltage_dropping == false) {
|
||||
if (bat_delay_diff > 0.008) {
|
||||
bat_voltage_dropping = true;
|
||||
bat_state_change_v = battery_voltage;
|
||||
// SerialBT.printf("STATE CHANGE to DISCHARGE at delta=%.3fv. State change v is now %.3fv.\n", bat_delay_diff, bat_state_change_v);
|
||||
}
|
||||
}
|
||||
bat_voltage_dropping = true;
|
||||
} else {
|
||||
if (bat_voltage_dropping == true) {
|
||||
if (bat_delay_diff > 0.01) {
|
||||
bat_voltage_dropping = false;
|
||||
bat_state_change_v = battery_voltage;
|
||||
// SerialBT.printf("STATE CHANGE to CHARGE at delta=%.3fv. State change v is now %.3fv.\n", bat_delay_diff, bat_state_change_v);
|
||||
}
|
||||
}
|
||||
bat_voltage_dropping = false;
|
||||
}
|
||||
bat_samples_count = 0;
|
||||
bat_delay_v = battery_voltage;
|
||||
}
|
||||
|
||||
if (bat_voltage_dropping && battery_voltage < BAT_V_FLOAT) {
|
||||
battery_state = BATTERY_STATE_DISCHARGING;
|
||||
} else {
|
||||
if (battery_percent < 100.0) {
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_21
|
||||
battery_state = BATTERY_STATE_CHARGING;
|
||||
} else {
|
||||
battery_state = BATTERY_STATE_CHARGED;
|
||||
}
|
||||
#else
|
||||
battery_state = BATTERY_STATE_DISCHARGING;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
|
||||
// if (bt_state == BT_STATE_CONNECTED) {
|
||||
// SerialBT.printf("Bus voltage %.3fv. Unfiltered %.3fv.", battery_voltage, bat_v_samples[BAT_SAMPLES-1]);
|
||||
// if (bat_voltage_dropping) {
|
||||
// SerialBT.printf(" Voltage is dropping. Percentage %.1f%%.", battery_percent);
|
||||
// SerialBT.printf(" Voltage is dropping. Percentage %.1f%%.\n", battery_percent);
|
||||
// } else {
|
||||
// SerialBT.printf(" Voltage is not dropping. Percentage %.1f%%.", battery_percent);
|
||||
// SerialBT.print(" Voltage is not dropping.\n");
|
||||
// }
|
||||
// if (battery_state == BATTERY_STATE_DISCHARGING) { SerialBT.printf(" Battery discharging. delay_v %.3fv", bat_delay_v); }
|
||||
// if (battery_state == BATTERY_STATE_CHARGING) { SerialBT.printf(" Battery charging. delay_v %.3fv", bat_delay_v); }
|
||||
// if (battery_state == BATTERY_STATE_CHARGED) { SerialBT.print(" Battery is charged."); }
|
||||
// SerialBT.print("\n");
|
||||
// }
|
||||
}
|
||||
|
||||
#elif BOARD_MODEL == BOARD_TBEAM || BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
if (PMU) {
|
||||
float discharge_current = 0;
|
||||
float charge_current = 0;
|
||||
@ -250,7 +172,7 @@ void measure_battery() {
|
||||
}
|
||||
}
|
||||
} else {
|
||||
battery_state = BATTERY_STATE_UNKNOWN;
|
||||
battery_state = BATTERY_STATE_DISCHARGING;
|
||||
battery_percent = 0.0;
|
||||
battery_voltage = 0.0;
|
||||
}
|
||||
@ -292,7 +214,7 @@ void measure_battery() {
|
||||
battery_ready = false;
|
||||
}
|
||||
|
||||
#elif BOARD_MODEL == BOARD_OPENCOM_XL
|
||||
#elif BOARD_MODEL == BOARD_FREENODE
|
||||
battery_installed = true;
|
||||
battery_indeterminate = false;
|
||||
|
||||
@ -379,29 +301,31 @@ void update_pmu() {
|
||||
}
|
||||
|
||||
bool init_pmu() {
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_TDECK
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1
|
||||
pinMode(pin_vbat, INPUT);
|
||||
return true;
|
||||
#elif BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
pinMode(pin_ctrl,OUTPUT);
|
||||
digitalWrite(pin_ctrl, LOW);
|
||||
return true;
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
Wire.begin(I2C_SDA, I2C_SCL);
|
||||
|
||||
if (!PMU) {
|
||||
PMU = new XPowersAXP2101(PMU_WIRE_PORT);
|
||||
if (!PMU->init()) {
|
||||
Serial.println("Warning: Failed to find AXP2101 power management");
|
||||
delete PMU;
|
||||
PMU = NULL;
|
||||
} else {
|
||||
Serial.println("AXP2101 PMU init succeeded, using AXP2101 PMU");
|
||||
}
|
||||
}
|
||||
|
||||
if (!PMU) {
|
||||
PMU = new XPowersAXP192(PMU_WIRE_PORT);
|
||||
if (!PMU->init()) {
|
||||
Serial.println("Warning: Failed to find AXP192 power management");
|
||||
delete PMU;
|
||||
PMU = NULL;
|
||||
} else {
|
||||
Serial.println("AXP192 PMU init succeeded, using AXP192 PMU");
|
||||
}
|
||||
}
|
||||
|
||||
@ -507,7 +431,7 @@ bool init_pmu() {
|
||||
PMU->setPowerKeyPressOffTime(XPOWERS_POWEROFF_4S);
|
||||
|
||||
return true;
|
||||
#elif BOARD_MODEL == BOARD_OPENCOM_XL
|
||||
#elif BOARD_MODEL == BOARD_FREENODE
|
||||
// board doesn't have PMU but we can measure batt voltage
|
||||
|
||||
// prep ADC for reading battery level
|
||||
@ -522,86 +446,6 @@ bool init_pmu() {
|
||||
// Get a single ADC sample and throw it away
|
||||
float raw = analogRead(PIN_VBAT);
|
||||
return true;
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
Wire1.begin(I2C_SDA, I2C_SCL);
|
||||
|
||||
if (!PMU) {
|
||||
PMU = new XPowersAXP2101(PMU_WIRE_PORT);
|
||||
if (!PMU->init()) {
|
||||
delete PMU;
|
||||
PMU = NULL;
|
||||
}
|
||||
}
|
||||
|
||||
if (!PMU) {
|
||||
return false;
|
||||
}
|
||||
|
||||
/**
|
||||
* gnss module power channel
|
||||
* The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
|
||||
* initialization
|
||||
*/
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO4);
|
||||
|
||||
// lora radio power channel
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO3);
|
||||
|
||||
// m.2 interface
|
||||
PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_DCDC3);
|
||||
|
||||
/**
|
||||
* ALDO2 cannot be turned off.
|
||||
* It is a necessary condition for sensor communication.
|
||||
* It must be turned on to properly access the sensor and screen
|
||||
* It is also responsible for the power supply of PCF8563
|
||||
*/
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO2);
|
||||
|
||||
// 6-axis , magnetometer ,bme280 , oled screen power channel
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO1);
|
||||
|
||||
// sdcard power channle
|
||||
PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_BLDO1);
|
||||
|
||||
// PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
|
||||
// PMU->enablePowerOutput(XPOWERS_DCDC4);
|
||||
|
||||
// not use channel
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
|
||||
PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
|
||||
PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
|
||||
PMU->disablePowerOutput(XPOWERS_VBACKUP);
|
||||
|
||||
// Configure charging
|
||||
PMU->setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
|
||||
PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
|
||||
// TODO: Reset
|
||||
PMU->setChargingLedMode(XPOWERS_CHG_LED_CTRL_CHG);
|
||||
|
||||
// Set the time of pressing the button to turn off
|
||||
PMU->setPowerKeyPressOffTime(XPOWERS_POWEROFF_4S);
|
||||
PMU->setPowerKeyPressOnTime(XPOWERS_POWERON_128MS);
|
||||
|
||||
// disable all axp chip interrupt
|
||||
PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
|
||||
PMU->clearIrqStatus();
|
||||
|
||||
// It is necessary to disable the detection function of the TS pin on the board
|
||||
// without the battery temperature detection function, otherwise it will cause abnormal charging
|
||||
PMU->disableTSPinMeasure();
|
||||
PMU->enableVbusVoltageMeasure();
|
||||
PMU->enableBattVoltageMeasure();
|
||||
|
||||
|
||||
return true;
|
||||
#else
|
||||
return false;
|
||||
#endif
|
||||
|
||||
@ -24,6 +24,7 @@ The latest release, installable through `rnodeconf`, is version `1.73`. This rel
|
||||
- Fix TNC EEPROM settings not being saved - courtesy of @attermann
|
||||
- Fix ESP32 linker errors - BSP version is now fixed at 2.0.17, using the older crosstool-ng linker from previous versions (2021r1)
|
||||
|
||||
|
||||
You must have at least version `2.1.3` of `rnodeconf` installed to update the RNode Firmware to version `1.73`. Get it by updating the `rns` package to at least version `0.6.4`.
|
||||
|
||||
## Supported products and boards
|
||||
|
||||
101
ROM.h
101
ROM.h
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -14,40 +14,79 @@
|
||||
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
||||
#ifndef ROM_H
|
||||
#define ROM_H
|
||||
#define CHECKSUMMED_SIZE 0x0B
|
||||
#define ROM_H
|
||||
|
||||
// ROM address map ///////////////
|
||||
#define ADDR_PRODUCT 0x00
|
||||
#define ADDR_MODEL 0x01
|
||||
#define ADDR_HW_REV 0x02
|
||||
#define ADDR_SERIAL 0x03
|
||||
#define ADDR_MADE 0x07
|
||||
#define ADDR_CHKSUM 0x0B
|
||||
#define ADDR_SIGNATURE 0x1B
|
||||
#define ADDR_INFO_LOCK 0x9B
|
||||
#define CHECKSUMMED_SIZE 0x0B
|
||||
|
||||
#define ADDR_CONF_SF 0x9C
|
||||
#define ADDR_CONF_CR 0x9D
|
||||
#define ADDR_CONF_TXP 0x9E
|
||||
#define ADDR_CONF_BW 0x9F
|
||||
#define ADDR_CONF_FREQ 0xA3
|
||||
#define ADDR_CONF_OK 0xA7
|
||||
#define PRODUCT_RNODE 0x03
|
||||
#define PRODUCT_HMBRW 0xF0
|
||||
#define PRODUCT_TBEAM 0xE0
|
||||
#define PRODUCT_T32_10 0xB2
|
||||
#define PRODUCT_T32_20 0xB0
|
||||
#define PRODUCT_T32_21 0xB1
|
||||
#define PRODUCT_H32_V2 0xC0
|
||||
#define PRODUCT_H32_V3 0xC1
|
||||
#define PRODUCT_RAK4631 0x10
|
||||
#define PRODUCT_FREENODE 0x20
|
||||
#define MODEL_11 0x11
|
||||
#define MODEL_12 0x12
|
||||
#define MODEL_13 0x13 // RAK4631 LF with WisBlock SX1280 module (LIBSYS002)
|
||||
#define MODEL_14 0x14 // RAK4631 HF with WisBlock SX1280 module (LIBSYS002)
|
||||
#define PRODUCT_TECHO 0x15
|
||||
#define MODEL_16 0x16 // T-Echo 433
|
||||
#define MODEL_17 0x17 // T-Echo 915
|
||||
#define MODEL_21 0x21 // European band, 868MHz
|
||||
#define MODEL_A1 0xA1
|
||||
#define MODEL_A5 0xA5 // T3S3 SX1280 PA
|
||||
#define MODEL_A6 0xA6
|
||||
#define MODEL_A4 0xA4
|
||||
#define MODEL_A9 0xA9
|
||||
#define MODEL_A3 0xA3
|
||||
#define MODEL_A8 0xA8
|
||||
#define MODEL_A2 0xA2
|
||||
#define MODEL_A7 0xA7
|
||||
#define MODEL_B3 0xB3
|
||||
#define MODEL_B8 0xB8
|
||||
#define MODEL_B4 0xB4
|
||||
#define MODEL_B9 0xB9
|
||||
#define MODEL_BA 0xBA
|
||||
#define MODEL_BB 0xBB
|
||||
#define MODEL_C4 0xC4
|
||||
#define MODEL_C9 0xC9
|
||||
#define MODEL_C5 0xC5
|
||||
#define MODEL_CA 0xCA
|
||||
#define MODEL_E4 0xE4
|
||||
#define MODEL_E9 0xE9
|
||||
#define MODEL_E3 0xE3
|
||||
#define MODEL_E8 0xE8
|
||||
#define MODEL_FE 0xFE
|
||||
#define MODEL_FF 0xFF
|
||||
|
||||
#define ADDR_CONF_BT 0xB0
|
||||
#define ADDR_CONF_DSET 0xB1
|
||||
#define ADDR_CONF_DINT 0xB2
|
||||
#define ADDR_CONF_DADR 0xB3
|
||||
#define ADDR_CONF_DBLK 0xB4
|
||||
#define ADDR_CONF_PSET 0xB5
|
||||
#define ADDR_CONF_PINT 0xB6
|
||||
#define ADDR_CONF_BSET 0xB7
|
||||
#define ADDR_PRODUCT 0x00
|
||||
#define ADDR_MODEL 0x01
|
||||
#define ADDR_HW_REV 0x02
|
||||
#define ADDR_SERIAL 0x03
|
||||
#define ADDR_MADE 0x07
|
||||
#define ADDR_CHKSUM 0x0B
|
||||
#define ADDR_SIGNATURE 0x1B
|
||||
#define ADDR_INFO_LOCK 0x9B
|
||||
|
||||
#define INFO_LOCK_BYTE 0x73
|
||||
#define CONF_OK_BYTE 0x73
|
||||
#define BT_ENABLE_BYTE 0x73
|
||||
#define ADDR_CONF_SF 0x9C
|
||||
#define ADDR_CONF_CR 0x9D
|
||||
#define ADDR_CONF_TXP 0x9E
|
||||
#define ADDR_CONF_BW 0x9F
|
||||
#define ADDR_CONF_FREQ 0xA3
|
||||
#define ADDR_CONF_OK 0xA7
|
||||
|
||||
#define ADDR_CONF_BT 0xB0
|
||||
#define ADDR_CONF_DSET 0xB1
|
||||
#define ADDR_CONF_DINT 0xB2
|
||||
#define ADDR_CONF_DADR 0xB3
|
||||
|
||||
#define EEPROM_RESERVED 200
|
||||
//////////////////////////////////
|
||||
#define INFO_LOCK_BYTE 0x73
|
||||
#define CONF_OK_BYTE 0x73
|
||||
#define BT_ENABLE_BYTE 0x73
|
||||
|
||||
#define EEPROM_RESERVED 200
|
||||
|
||||
#endif
|
||||
|
||||
119
Radio.cpp
119
Radio.cpp
@ -119,7 +119,7 @@ sx126x::sx126x(uint8_t index, SPIClass* spi, bool tcxo, bool dio2_as_rf_switch,
|
||||
RadioInterface(index),
|
||||
_spiSettings(8E6, MSBFIRST, SPI_MODE0), _spiModem(spi), _ss(ss),
|
||||
_sclk(sclk), _mosi(mosi), _miso(miso), _reset(reset), _dio0(dio0),
|
||||
_busy(busy), _rxen(rxen), _frequency(0), _sf(0x07), _bw(0x04),
|
||||
_busy(busy), _rxen(rxen), _frequency(0), _txp(0), _sf(0x07), _bw(0x04),
|
||||
_cr(0x01), _ldro(0x00), _packetIndex(0), _implicitHeaderMode(0),
|
||||
_payloadLength(255), _crcMode(1), _fifo_tx_addr_ptr(0),
|
||||
_fifo_rx_addr_ptr(0), _preinit_done(false), _tcxo(tcxo),
|
||||
@ -129,7 +129,7 @@ sx126x::sx126x(uint8_t index, SPIClass* spi, bool tcxo, bool dio2_as_rf_switch,
|
||||
setTimeout(0);
|
||||
// TODO, figure out why this has to be done. Using the index to reference the
|
||||
// interface_obj list causes a crash otherwise
|
||||
//_index = getIndex();
|
||||
_index = getIndex();
|
||||
}
|
||||
|
||||
bool sx126x::preInit() {
|
||||
@ -488,34 +488,34 @@ int sx126x::beginPacket(int implicitHeader)
|
||||
|
||||
int sx126x::endPacket()
|
||||
{
|
||||
setPacketParams(_preambleLength, _implicitHeaderMode, _payloadLength, _crcMode);
|
||||
setPacketParams(_preambleLength, _implicitHeaderMode, _payloadLength, _crcMode);
|
||||
|
||||
// put in single TX mode
|
||||
uint8_t timeout[3] = {0};
|
||||
executeOpcode(OP_TX_6X, timeout, 3);
|
||||
// put in single TX mode
|
||||
uint8_t timeout[3] = {0};
|
||||
executeOpcode(OP_TX_6X, timeout, 3);
|
||||
|
||||
uint8_t buf[2];
|
||||
uint8_t buf[2];
|
||||
|
||||
buf[0] = 0x00;
|
||||
buf[1] = 0x00;
|
||||
buf[0] = 0x00;
|
||||
buf[1] = 0x00;
|
||||
|
||||
executeOpcodeRead(OP_GET_IRQ_STATUS_6X, buf, 2);
|
||||
executeOpcodeRead(OP_GET_IRQ_STATUS_6X, buf, 2);
|
||||
|
||||
// wait for TX done
|
||||
while ((buf[1] & IRQ_TX_DONE_MASK_6X) == 0) {
|
||||
// wait for TX done
|
||||
while ((buf[1] & IRQ_TX_DONE_MASK_6X) == 0) {
|
||||
buf[0] = 0x00;
|
||||
buf[1] = 0x00;
|
||||
executeOpcodeRead(OP_GET_IRQ_STATUS_6X, buf, 2);
|
||||
yield();
|
||||
}
|
||||
}
|
||||
|
||||
// clear IRQ's
|
||||
// clear IRQ's
|
||||
|
||||
uint8_t mask[2];
|
||||
mask[0] = 0x00;
|
||||
mask[1] = IRQ_TX_DONE_MASK_6X;
|
||||
executeOpcode(OP_CLEAR_IRQ_STATUS_6X, mask, 2);
|
||||
return 1;
|
||||
uint8_t mask[2];
|
||||
mask[0] = 0x00;
|
||||
mask[1] = IRQ_TX_DONE_MASK_6X;
|
||||
executeOpcode(OP_CLEAR_IRQ_STATUS_6X, mask, 2);
|
||||
return 1;
|
||||
}
|
||||
|
||||
uint8_t sx126x::modemStatus() {
|
||||
@ -561,7 +561,7 @@ uint8_t sx126x::packetRssiRaw() {
|
||||
return buf[2];
|
||||
}
|
||||
|
||||
int ISR_VECT sx126x::packetRssi(uint8_t pkt_snr_raw) {
|
||||
int ISR_VECT sx126x::packetRssi() {
|
||||
// may need more calculations here
|
||||
uint8_t buf[3] = {0};
|
||||
executeOpcodeRead(OP_PACKET_STATUS_6X, buf, 3);
|
||||
@ -740,7 +740,7 @@ void sx126x::sleep()
|
||||
|
||||
void sx126x::enableTCXO() {
|
||||
if (_tcxo) {
|
||||
#if BOARD_MODEL == BOARD_OPENCOM_XL || BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
#if BOARD_MODEL == BOARD_FREENODE || BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
@ -748,10 +748,6 @@ void sx126x::enableTCXO() {
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_T3S3
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_TDECK
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#else
|
||||
uint8_t buf[4] = {0};
|
||||
#endif
|
||||
@ -793,7 +789,7 @@ void sx126x::setTxPower(int level, int outputPin) {
|
||||
executeOpcode(OP_TX_PARAMS_6X, tx_buf, 2);
|
||||
}
|
||||
|
||||
int8_t sx126x::getTxPower() {
|
||||
uint8_t sx126x::getTxPower() {
|
||||
return _txp;
|
||||
}
|
||||
|
||||
@ -999,9 +995,7 @@ void sx126x::updateBitrate() {
|
||||
_lora_symbol_time_ms = (1.0/_lora_symbol_rate)*1000.0;
|
||||
_bitrate = (uint32_t)(_sf * ( (4.0/(float)(_cr+4)) / ((float)(pow(2, _sf))/((float)getSignalBandwidth()/1000.0)) ) * 1000.0);
|
||||
_lora_us_per_byte = 1000000.0/((float)_bitrate/8.0);
|
||||
_csma_slot_ms = _lora_symbol_time_ms*12;
|
||||
if (_csma_slot_ms > CSMA_SLOT_MAX_MS) { _csma_slot_ms = CSMA_SLOT_MAX_MS; }
|
||||
if (_csma_slot_ms < CSMA_SLOT_MIN_MS) { _csma_slot_ms = CSMA_SLOT_MIN_MS; }
|
||||
//_csma_slot_ms = _lora_symbol_time_ms*10;
|
||||
float target_preamble_symbols = (LORA_PREAMBLE_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW;
|
||||
if (target_preamble_symbols < LORA_PREAMBLE_SYMBOLS_MIN) {
|
||||
target_preamble_symbols = LORA_PREAMBLE_SYMBOLS_MIN;
|
||||
@ -1098,7 +1092,7 @@ sx127x::sx127x(uint8_t index, SPIClass* spi, int ss, int sclk, int mosi, int mis
|
||||
setTimeout(0);
|
||||
// TODO, figure out why this has to be done. Using the index to reference the
|
||||
// interface_obj list causes a crash otherwise
|
||||
//_index = getIndex();
|
||||
_index = getIndex();
|
||||
}
|
||||
|
||||
void sx127x::setSPIFrequency(uint32_t frequency) { _spiSettings = SPISettings(frequency, MSBFIRST, SPI_MODE0); }
|
||||
@ -1252,26 +1246,22 @@ uint8_t sx127x::packetRssiRaw() {
|
||||
return pkt_rssi_value;
|
||||
}
|
||||
|
||||
int ISR_VECT sx127x::packetRssi(uint8_t pkt_snr_raw) {
|
||||
int pkt_rssi = (int)readRegister(REG_PKT_RSSI_VALUE_7X) - RSSI_OFFSET;
|
||||
int pkt_snr;
|
||||
if (pkt_snr_raw == 0xFF) {
|
||||
pkt_snr = packetSnr();
|
||||
} else {
|
||||
pkt_snr = ((int8_t)pkt_snr_raw)*0.25;
|
||||
}
|
||||
if (_frequency < 820E6) pkt_rssi -= 7;
|
||||
if (pkt_snr < 0) {
|
||||
pkt_rssi += pkt_snr;
|
||||
} else {
|
||||
// Slope correction is (16/15)*pkt_rssi,
|
||||
// this estimation looses one floating point
|
||||
// operation, and should be precise enough.
|
||||
pkt_rssi = (int)(1.066 * pkt_rssi);
|
||||
}
|
||||
return pkt_rssi;
|
||||
}
|
||||
int ISR_VECT sx127x::packetRssi() {
|
||||
int pkt_rssi = (int)readRegister(REG_PKT_RSSI_VALUE_7X) - RSSI_OFFSET;
|
||||
int pkt_snr = packetSnr();
|
||||
|
||||
if (_frequency < 820E6) pkt_rssi -= 7;
|
||||
|
||||
if (pkt_snr < 0) {
|
||||
pkt_rssi += pkt_snr;
|
||||
} else {
|
||||
// Slope correction is (16/15)*pkt_rssi,
|
||||
// this estimation looses one floating point
|
||||
// operation, and should be precise enough.
|
||||
pkt_rssi = (int)(1.066 * pkt_rssi);
|
||||
}
|
||||
return pkt_rssi;
|
||||
}
|
||||
|
||||
uint8_t ISR_VECT sx127x::packetSnrRaw() {
|
||||
return readRegister(REG_PKT_SNR_VALUE_7X);
|
||||
@ -1384,10 +1374,9 @@ void sx127x::setTxPower(int level, int outputPin) {
|
||||
writeRegister(REG_PA_DAC_7X, 0x84);
|
||||
writeRegister(REG_PA_CONFIG_7X, PA_BOOST_7X | (level - 2));
|
||||
}
|
||||
_txp = level;
|
||||
}
|
||||
|
||||
int8_t sx127x::getTxPower() { return _txp; }
|
||||
uint8_t sx127x::getTxPower() { byte txp = readRegister(REG_PA_CONFIG_7X); return txp; }
|
||||
|
||||
void sx127x::setFrequency(uint32_t frequency) {
|
||||
_frequency = frequency;
|
||||
@ -1542,9 +1531,7 @@ void sx127x::updateBitrate() {
|
||||
_lora_symbol_time_ms = (1.0/_lora_symbol_rate)*1000.0;
|
||||
_bitrate = (uint32_t)(_sf * ( (4.0/(float)(_cr+4)) / ((float)(pow(2, _sf))/((float)getSignalBandwidth()/1000.0)) ) * 1000.0);
|
||||
_lora_us_per_byte = 1000000.0/((float)_bitrate/8.0);
|
||||
_csma_slot_ms = _lora_symbol_time_ms*12;
|
||||
if (_csma_slot_ms > CSMA_SLOT_MAX_MS) { _csma_slot_ms = CSMA_SLOT_MAX_MS; }
|
||||
if (_csma_slot_ms < CSMA_SLOT_MIN_MS) { _csma_slot_ms = CSMA_SLOT_MIN_MS; }
|
||||
//_csma_slot_ms = _lora_symbol_time_ms*10;
|
||||
float target_preamble_symbols = (LORA_PREAMBLE_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW;
|
||||
if (target_preamble_symbols < LORA_PREAMBLE_SYMBOLS_MIN) {
|
||||
target_preamble_symbols = LORA_PREAMBLE_SYMBOLS_MIN;
|
||||
@ -1618,7 +1605,7 @@ sx128x::sx128x(uint8_t index, SPIClass* spi, bool tcxo, int ss, int sclk, int mo
|
||||
_spiSettings(8E6, MSBFIRST, SPI_MODE0),
|
||||
_spiModem(spi),
|
||||
_ss(ss), _sclk(sclk), _mosi(mosi), _miso(miso), _reset(reset), _dio0(dio0),
|
||||
_busy(busy), _rxen(rxen), _txen(txen), _frequency(0), _sf(0x05),
|
||||
_busy(busy), _rxen(rxen), _txen(txen), _frequency(0), _txp(0), _sf(0x05),
|
||||
_bw(0x34), _cr(0x01), _packetIndex(0), _implicitHeaderMode(0),
|
||||
_payloadLength(255), _crcMode(0), _fifo_tx_addr_ptr(0), _fifo_rx_addr_ptr(0),
|
||||
_rxPacketLength(0), _preinit_done(false),
|
||||
@ -1628,7 +1615,7 @@ sx128x::sx128x(uint8_t index, SPIClass* spi, bool tcxo, int ss, int sclk, int mo
|
||||
setTimeout(0);
|
||||
// TODO, figure out why this has to be done. Using the index to reference the
|
||||
// interface_obj list causes a crash otherwise
|
||||
//_index = getIndex();
|
||||
_index = getIndex();
|
||||
}
|
||||
|
||||
bool sx128x::preInit() {
|
||||
@ -2041,7 +2028,7 @@ uint8_t sx128x::packetRssiRaw() {
|
||||
return buf[0];
|
||||
}
|
||||
|
||||
int ISR_VECT sx128x::packetRssi(uint8_t pkt_snr_raw) {
|
||||
int ISR_VECT sx128x::packetRssi() {
|
||||
// may need more calculations here
|
||||
uint8_t buf[5] = {0};
|
||||
executeOpcodeRead(OP_PACKET_STATUS_8X, buf, 5);
|
||||
@ -2346,7 +2333,7 @@ void sx128x::setTxPower(int level, int outputPin) {
|
||||
|
||||
executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2);
|
||||
|
||||
#elif BOARD_VARIANT == MODEL_AB
|
||||
#elif BOARD_VARIANT == MODEL_A5
|
||||
// T3S3 SX1280 PA
|
||||
if (level > 20) {
|
||||
level = 20;
|
||||
@ -2427,7 +2414,7 @@ void sx128x::setTxPower(int level, int outputPin) {
|
||||
break;
|
||||
}
|
||||
|
||||
tx_buf[0] = reg_value;
|
||||
tx_buf[0] = reg_value + 18;
|
||||
tx_buf[1] = 0xE0; // ramping time - 20 microseconds
|
||||
#else
|
||||
// For SX1280 boards with no specific PA requirements
|
||||
@ -2445,7 +2432,7 @@ void sx128x::setTxPower(int level, int outputPin) {
|
||||
executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2);
|
||||
}
|
||||
|
||||
int8_t sx128x::getTxPower() {
|
||||
uint8_t sx128x::getTxPower() {
|
||||
return _txp;
|
||||
}
|
||||
|
||||
@ -2638,16 +2625,14 @@ void sx128x::updateBitrate() {
|
||||
_lora_symbol_time_ms = (1.0/_lora_symbol_rate)*1000.0;
|
||||
_bitrate = (uint32_t)(_sf * ( (4.0/(float)(_cr+4)) / ((float)(pow(2, _sf))/((float)getSignalBandwidth()/1000.0)) ) * 1000.0);
|
||||
_lora_us_per_byte = 1000000.0/((float)_bitrate/8.0);
|
||||
_csma_slot_ms = _lora_symbol_time_ms*12;
|
||||
if (_csma_slot_ms > CSMA_SLOT_MAX_MS) { _csma_slot_ms = CSMA_SLOT_MAX_MS; }
|
||||
if (_csma_slot_ms < CSMA_SLOT_MIN_MS) { _csma_slot_ms = CSMA_SLOT_MIN_MS; }
|
||||
_csma_slot_ms = 10;
|
||||
|
||||
float target_preamble_symbols;
|
||||
if (_bitrate <= LORA_FAST_BITRATE_THRESHOLD) {
|
||||
//if (_bitrate <= LORA_FAST_BITRATE_THRESHOLD) {
|
||||
target_preamble_symbols = (LORA_PREAMBLE_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW;
|
||||
} else {
|
||||
target_preamble_symbols = (LORA_PREAMBLE_FAST_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW;
|
||||
}
|
||||
//} else {
|
||||
/*target_preamble_symbols = (LORA_PREAMBLE_FAST_TARGET_MS/_lora_symbol_time_ms)-LORA_PREAMBLE_SYMBOLS_HW;
|
||||
}*/
|
||||
if (target_preamble_symbols < LORA_PREAMBLE_SYMBOLS_MIN) {
|
||||
target_preamble_symbols = LORA_PREAMBLE_SYMBOLS_MIN;
|
||||
} else {
|
||||
|
||||
41
Radio.hpp
41
Radio.hpp
@ -1,7 +1,7 @@
|
||||
// Copyright (c) Sandeep Mistry. All rights reserved.
|
||||
// Licensed under the MIT license.
|
||||
|
||||
// Modifications and additions copyright 2024 by Mark Qvist & Jacob Eva
|
||||
// Modifications and additions copyright 2023 by Mark Qvist & Jacob Eva
|
||||
// Obviously still under the MIT license.
|
||||
|
||||
#ifndef RADIO_H
|
||||
@ -34,17 +34,15 @@
|
||||
#define LORA_PREAMBLE_SYMBOLS_HW 4
|
||||
#define LORA_PREAMBLE_SYMBOLS_MIN 18
|
||||
#define LORA_PREAMBLE_TARGET_MS 15
|
||||
#define LORA_PREAMBLE_FAST_TARGET_MS 4
|
||||
#define LORA_PREAMBLE_FAST_TARGET_MS 1
|
||||
#define LORA_FAST_BITRATE_THRESHOLD 40000
|
||||
#define CSMA_SLOT_MAX_MS 100
|
||||
#define CSMA_SLOT_MIN_MS 24
|
||||
|
||||
#define RSSI_OFFSET 157
|
||||
|
||||
#define PHY_HEADER_LORA_SYMBOLS 8
|
||||
|
||||
#define _e 2.71828183
|
||||
#define _S 12.5
|
||||
#define _S 10.0
|
||||
|
||||
// Status flags
|
||||
const uint8_t SIG_DETECT = 0x01;
|
||||
@ -77,17 +75,17 @@ public:
|
||||
_stat_signal_detected(false), _stat_signal_synced(false),_stat_rx_ongoing(false), _last_dcd(0),
|
||||
_dcd_count(0), _dcd(false), _dcd_led(false),
|
||||
_dcd_waiting(false), _dcd_wait_until(0), _dcd_sample(0),
|
||||
_post_tx_yield_timeout(0), _csma_slot_ms(50), _csma_p(85), _csma_p_min(0.15),
|
||||
_csma_p_max(0.333), _csma_b_speed(0.15), _preambleLength(6), _lora_symbol_time_ms(0.0),
|
||||
_post_tx_yield_timeout(0), _csma_slot_ms(50), _csma_p_min(0.1),
|
||||
_csma_p_max(0.8), _preambleLength(6), _lora_symbol_time_ms(0.0),
|
||||
_lora_symbol_rate(0.0), _lora_us_per_byte(0.0), _bitrate(0),
|
||||
_packet{0}, _onReceive(NULL), _txp(0) {};
|
||||
_packet{0}, _onReceive(NULL) {};
|
||||
virtual int begin() = 0;
|
||||
virtual void end() = 0;
|
||||
|
||||
virtual int beginPacket(int implicitHeader = false) = 0;
|
||||
virtual int endPacket() = 0;
|
||||
|
||||
virtual int packetRssi(uint8_t pkt_snr_raw = 0xFF) = 0;
|
||||
virtual int packetRssi() = 0;
|
||||
virtual int currentRssi() = 0;
|
||||
virtual uint8_t packetRssiRaw() = 0;
|
||||
virtual uint8_t currentRssiRaw() = 0;
|
||||
@ -112,7 +110,7 @@ public:
|
||||
virtual void sleep() = 0;
|
||||
|
||||
virtual bool preInit() = 0;
|
||||
virtual int8_t getTxPower() = 0;
|
||||
virtual uint8_t getTxPower() = 0;
|
||||
virtual void setTxPower(int level, int outputPin = PA_OUTPUT_PA_BOOST_PIN) = 0;
|
||||
virtual uint32_t getFrequency() = 0;
|
||||
virtual void setFrequency(uint32_t frequency) = 0;
|
||||
@ -290,8 +288,8 @@ public:
|
||||
float getLongtermChannelUtil() { return _longterm_channel_util; };
|
||||
float CSMASlope(float u) { return (pow(_e,_S*u-_S/2.0))/(pow(_e,_S*u-_S/2.0)+1.0); };
|
||||
void updateCSMAp() {
|
||||
_csma_p = (uint8_t)((1.0-(_csma_p_min+(_csma_p_max-_csma_p_min)*CSMASlope(_airtime+_csma_b_speed)))*255.0);
|
||||
}
|
||||
_csma_p = (uint8_t)((1.0-(_csma_p_min+(_csma_p_max-_csma_p_min)*CSMASlope(_airtime)))*255.0);
|
||||
};
|
||||
uint8_t getCSMAp() { return _csma_p; };
|
||||
void setCSMASlotMS(int slot_size) { _csma_slot_ms = slot_size; };
|
||||
int getCSMASlotMS() { return _csma_slot_ms; };
|
||||
@ -303,7 +301,6 @@ protected:
|
||||
virtual void implicitHeaderMode() = 0;
|
||||
|
||||
uint8_t _index;
|
||||
int8_t _txp;
|
||||
bool _radio_locked;
|
||||
bool _radio_online;
|
||||
float _st_airtime_limit;
|
||||
@ -333,7 +330,6 @@ protected:
|
||||
int _csma_slot_ms;
|
||||
float _csma_p_min;
|
||||
float _csma_p_max;
|
||||
float _csma_b_speed;
|
||||
long _preambleLength;
|
||||
float _lora_symbol_time_ms;
|
||||
float _lora_symbol_rate;
|
||||
@ -354,7 +350,7 @@ public:
|
||||
int beginPacket(int implicitHeader = false);
|
||||
int endPacket();
|
||||
|
||||
int packetRssi(uint8_t pkt_snr_raw = 0xFF);
|
||||
int packetRssi();
|
||||
int currentRssi();
|
||||
uint8_t packetRssiRaw();
|
||||
uint8_t currentRssiRaw();
|
||||
@ -379,7 +375,7 @@ public:
|
||||
void sleep();
|
||||
|
||||
bool preInit();
|
||||
int8_t getTxPower();
|
||||
uint8_t getTxPower();
|
||||
void setTxPower(int level, int outputPin = PA_OUTPUT_PA_BOOST_PIN);
|
||||
uint32_t getFrequency();
|
||||
void setFrequency(uint32_t frequency);
|
||||
@ -447,6 +443,7 @@ private:
|
||||
int _rxen;
|
||||
int _busy;
|
||||
uint32_t _frequency;
|
||||
int _txp;
|
||||
uint8_t _sf;
|
||||
uint8_t _bw;
|
||||
uint8_t _cr;
|
||||
@ -458,6 +455,7 @@ private:
|
||||
int _fifo_tx_addr_ptr;
|
||||
int _fifo_rx_addr_ptr;
|
||||
bool _preinit_done;
|
||||
uint8_t _index;
|
||||
bool _tcxo;
|
||||
bool _dio2_as_rf_switch;
|
||||
};
|
||||
@ -472,7 +470,7 @@ public:
|
||||
int beginPacket(int implicitHeader = false);
|
||||
int endPacket();
|
||||
|
||||
int packetRssi(uint8_t pkt_snr_raw = 0xFF);
|
||||
int packetRssi();
|
||||
int currentRssi();
|
||||
uint8_t packetRssiRaw();
|
||||
uint8_t currentRssiRaw();
|
||||
@ -497,7 +495,7 @@ public:
|
||||
void sleep();
|
||||
|
||||
bool preInit();
|
||||
int8_t getTxPower();
|
||||
uint8_t getTxPower();
|
||||
void setTxPower(int level, int outputPin = PA_OUTPUT_PA_BOOST_PIN);
|
||||
uint32_t getFrequency();
|
||||
void setFrequency(uint32_t frequency);
|
||||
@ -551,6 +549,7 @@ private:
|
||||
int _packetIndex;
|
||||
int _implicitHeaderMode;
|
||||
bool _preinit_done;
|
||||
uint8_t _index;
|
||||
uint8_t _sf;
|
||||
uint8_t _cr;
|
||||
};
|
||||
@ -565,7 +564,7 @@ public:
|
||||
int beginPacket(int implicitHeader = false);
|
||||
int endPacket();
|
||||
|
||||
int packetRssi(uint8_t pkt_snr_raw = 0xFF);
|
||||
int packetRssi();
|
||||
int currentRssi();
|
||||
uint8_t packetRssiRaw();
|
||||
uint8_t currentRssiRaw();
|
||||
@ -590,7 +589,7 @@ public:
|
||||
void sleep();
|
||||
|
||||
bool preInit();
|
||||
int8_t getTxPower();
|
||||
uint8_t getTxPower();
|
||||
void setTxPower(int level, int outputPin = PA_OUTPUT_PA_BOOST_PIN);
|
||||
uint32_t getFrequency();
|
||||
void setFrequency(uint32_t frequency);
|
||||
@ -658,6 +657,7 @@ private:
|
||||
int _busy;
|
||||
int _modem;
|
||||
uint32_t _frequency;
|
||||
int _txp;
|
||||
uint8_t _sf;
|
||||
uint8_t _bw;
|
||||
uint8_t _cr;
|
||||
@ -669,6 +669,7 @@ private:
|
||||
int _fifo_rx_addr_ptr;
|
||||
bool _preinit_done;
|
||||
int _rxPacketLength;
|
||||
uint8_t _index;
|
||||
bool _tcxo;
|
||||
};
|
||||
#endif
|
||||
|
||||
Binary file not shown.
174
Utilities.h
174
Utilities.h
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -37,7 +37,7 @@
|
||||
|
||||
#include "ROM.h"
|
||||
#include "Framing.h"
|
||||
#include "src/misc/MD5.h"
|
||||
#include "MD5.h"
|
||||
|
||||
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
|
||||
uint8_t eeprom_read(uint32_t mapped_addr);
|
||||
@ -45,9 +45,6 @@ uint8_t eeprom_read(uint32_t mapped_addr);
|
||||
|
||||
#if HAS_DISPLAY == true
|
||||
#include "Display.h"
|
||||
#else
|
||||
void display_unblank() {}
|
||||
bool display_blanked = false;
|
||||
#endif
|
||||
|
||||
#if HAS_BLUETOOTH == true || HAS_BLE == true
|
||||
@ -74,11 +71,11 @@ uint8_t eeprom_read(uint32_t mapped_addr);
|
||||
#if BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
//https://github.com/espressif/esp-idf/issues/8855
|
||||
#include "hal/wdt_hal.h"
|
||||
#elif BOARD_MODEL == BOARD_T3S3
|
||||
#include "hal/wdt_hal.h"
|
||||
#else
|
||||
#include "hal/wdt_hal.h"
|
||||
#endif
|
||||
#elif BOARD_MODEL == BOARD_T3S3
|
||||
#include "hal/wdt_hal.h"
|
||||
#else BOARD_MODEL != BOARD_T3S3
|
||||
#include "soc/rtc_wdt.h"
|
||||
#endif
|
||||
#define ISR_VECT IRAM_ATTR
|
||||
#else
|
||||
#define ISR_VECT
|
||||
@ -101,20 +98,7 @@ uint8_t boot_vector = 0x00;
|
||||
uint8_t npr = 0;
|
||||
uint8_t npg = 0;
|
||||
uint8_t npb = 0;
|
||||
float npi = NP_M;
|
||||
bool pixels_started = false;
|
||||
|
||||
void led_set_intensity(uint8_t intensity) {
|
||||
npi = (float)intensity/255.0;
|
||||
}
|
||||
|
||||
void led_init() {
|
||||
if (EEPROM.read(eeprom_addr(ADDR_CONF_PSET)) == CONF_OK_BYTE) {
|
||||
uint8_t int_val = EEPROM.read(eeprom_addr(ADDR_CONF_PINT));
|
||||
led_set_intensity(int_val);
|
||||
}
|
||||
}
|
||||
|
||||
void npset(uint8_t r, uint8_t g, uint8_t b) {
|
||||
if (pixels_started != true) {
|
||||
pixels.begin();
|
||||
@ -123,7 +107,7 @@ uint8_t boot_vector = 0x00;
|
||||
|
||||
if (r != npr || g != npg || b != npb) {
|
||||
npr = r; npg = g; npb = b;
|
||||
pixels.setPixelColor(0, pixels.Color(npr*npi, npg*npi, npb*npi));
|
||||
pixels.setPixelColor(0, pixels.Color(npr*NP_M, npg*NP_M, npb*NP_M));
|
||||
pixels.show();
|
||||
}
|
||||
}
|
||||
@ -164,26 +148,11 @@ uint8_t boot_vector = 0x00;
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_E22_ESP32
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, LOW); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, HIGH); }
|
||||
#elif BOARD_MODEL == BOARD_TDECK
|
||||
void led_rx_on() { }
|
||||
void led_rx_off() { }
|
||||
void led_tx_on() { }
|
||||
void led_tx_off() { }
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
void led_rx_on() { }
|
||||
void led_rx_off() { }
|
||||
void led_tx_on() { }
|
||||
void led_tx_off() { }
|
||||
#elif BOARD_MODEL == BOARD_LORA32_V1_0
|
||||
#if defined(EXTERNAL_LEDS)
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
@ -242,7 +211,7 @@ uint8_t boot_vector = 0x00;
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#endif
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
#if BOARD_MODEL == BOARD_OPENCOM_XL
|
||||
#if BOARD_MODEL == BOARD_FREENODE
|
||||
void led_rx_on() { analogWrite(pin_led_rx, 1); }
|
||||
void led_rx_off() { analogWrite(pin_led_rx, 0); }
|
||||
void led_tx_on() { analogWrite(pin_led_tx, 1); }
|
||||
@ -414,8 +383,8 @@ unsigned long led_standby_ticks = 0;
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
|
||||
#if HAS_NP == true
|
||||
int led_standby_lng = 200;
|
||||
int led_standby_cut = 100;
|
||||
int led_standby_lng = 100;
|
||||
int led_standby_cut = 200;
|
||||
int led_standby_min = 0;
|
||||
int led_standby_max = 375+led_standby_lng;
|
||||
int led_notready_min = 0;
|
||||
@ -479,7 +448,7 @@ int8_t led_standby_direction = 0;
|
||||
} else {
|
||||
led_standby_intensity = led_standby_ti;
|
||||
}
|
||||
npset(led_standby_intensity/3, led_standby_intensity/3, led_standby_intensity/3);
|
||||
npset(0x00, 0x00, led_standby_intensity);
|
||||
}
|
||||
}
|
||||
|
||||
@ -626,17 +595,18 @@ void serial_write(uint8_t byte) {
|
||||
Serial.write(byte);
|
||||
} else {
|
||||
SerialBT.write(byte);
|
||||
#if MCU_VARIANT == MCU_NRF52 && HAS_BLE
|
||||
// This ensures that the TX buffer is flushed after a frame is queued in serial.
|
||||
// serial_in_frame is used to ensure that the flush only happens at the end of the frame
|
||||
if (serial_in_frame && byte == FEND) {
|
||||
SerialBT.flushTXD();
|
||||
serial_in_frame = false;
|
||||
}
|
||||
else if (!serial_in_frame && byte == FEND) {
|
||||
serial_in_frame = true;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_NRF52 && HAS_BLE
|
||||
// This ensures that the TX buffer is flushed after a frame is queued in serial.
|
||||
// serial_in_frame is used to ensure that the flush only happens at the end of the frame
|
||||
if (serial_in_frame && byte == FEND) {
|
||||
SerialBT.flushTXD();
|
||||
serial_in_frame = false;
|
||||
}
|
||||
else if (!serial_in_frame && byte == FEND) {
|
||||
serial_in_frame = true;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#else
|
||||
Serial.write(byte);
|
||||
@ -1059,8 +1029,6 @@ void setTXPower(RadioInterface* radio, int txp) {
|
||||
if (model == MODEL_A7) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A8) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A9) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_AA) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_AB) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_B3) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_B4) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
@ -1070,15 +1038,6 @@ void setTXPower(RadioInterface* radio, int txp) {
|
||||
if (model == MODEL_C4) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_C9) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_C5) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_CA) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_D4) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_D9) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_DB) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_DC) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_E4) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_E9) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_E3) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
@ -1264,11 +1223,11 @@ void promisc_disable() {
|
||||
#endif
|
||||
|
||||
bool eeprom_info_locked() {
|
||||
#if HAS_EEPROM
|
||||
uint8_t lock_byte = EEPROM.read(eeprom_addr(ADDR_INFO_LOCK));
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
uint8_t lock_byte = eeprom_read(eeprom_addr(ADDR_INFO_LOCK));
|
||||
#endif
|
||||
#if HAS_EEPROM
|
||||
uint8_t lock_byte = EEPROM.read(eeprom_addr(ADDR_INFO_LOCK));
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
uint8_t lock_byte = eeprom_read(eeprom_addr(ADDR_INFO_LOCK));
|
||||
#endif
|
||||
if (lock_byte == INFO_LOCK_BYTE) {
|
||||
return true;
|
||||
} else {
|
||||
@ -1345,15 +1304,15 @@ void eeprom_update(int mapped_addr, uint8_t byte) {
|
||||
written_bytes++;
|
||||
|
||||
if (((mapped_addr - eeprom_addr(0)) == ADDR_INFO_LOCK) || (mapped_addr - eeprom_addr(0)) == ADDR_CONF_OK) {
|
||||
// have to do a flush because we're only writing 1 byte and it syncs after 4
|
||||
eeprom_flush();
|
||||
// have to do a flush because we're only writing 1 byte and it syncs after 4
|
||||
eeprom_flush();
|
||||
}
|
||||
|
||||
if (written_bytes >= 4) {
|
||||
eeprom_file.close();
|
||||
eeprom_file.open(EEPROM_FILE, FILE_O_WRITE);
|
||||
written_bytes = 0;
|
||||
}
|
||||
if (written_bytes >= 4) {
|
||||
eeprom_file.close();
|
||||
eeprom_file.open(EEPROM_FILE, FILE_O_WRITE);
|
||||
written_bytes = 0;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -1385,16 +1344,16 @@ bool eeprom_lock_set() {
|
||||
}
|
||||
|
||||
bool eeprom_product_valid() {
|
||||
#if HAS_EEPROM
|
||||
uint8_t rval = EEPROM.read(eeprom_addr(ADDR_PRODUCT));
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
uint8_t rval = eeprom_read(eeprom_addr(ADDR_PRODUCT));
|
||||
#endif
|
||||
#if HAS_EEPROM
|
||||
uint8_t rval = EEPROM.read(eeprom_addr(ADDR_PRODUCT));
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
uint8_t rval = eeprom_read(eeprom_addr(ADDR_PRODUCT));
|
||||
#endif
|
||||
|
||||
#if PLATFORM == PLATFORM_ESP32
|
||||
if (rval == PRODUCT_RNODE || rval == BOARD_RNODE_NG_20 || rval == BOARD_RNODE_NG_21 || rval == PRODUCT_HMBRW || rval == PRODUCT_TBEAM || rval == PRODUCT_T32_10 || rval == PRODUCT_T32_20 || rval == PRODUCT_T32_21 || rval == PRODUCT_H32_V2 || rval == PRODUCT_H32_V3 || rval == PRODUCT_TDECK_V1 || rval == PRODUCT_TBEAM_S_V1) {
|
||||
if (rval == PRODUCT_RNODE || rval == BOARD_RNODE_NG_20 || rval == BOARD_RNODE_NG_21 || rval == PRODUCT_HMBRW || rval == PRODUCT_TBEAM || rval == PRODUCT_T32_10 || rval == PRODUCT_T32_20 || rval == PRODUCT_T32_21 || rval == PRODUCT_H32_V2 || rval == PRODUCT_H32_V3) {
|
||||
#elif PLATFORM == PLATFORM_NRF52
|
||||
if (rval == PRODUCT_TECHO || rval == PRODUCT_RAK4631 || rval == PRODUCT_HMBRW || rval == PRODUCT_OPENCOM_XL) {
|
||||
if (rval == PRODUCT_TECHO || rval == PRODUCT_RAK4631 || rval == PRODUCT_HMBRW || rval == PRODUCT_FREENODE) {
|
||||
#else
|
||||
if (false) {
|
||||
#endif
|
||||
@ -1416,18 +1375,14 @@ bool eeprom_model_valid() {
|
||||
if (model == MODEL_A3 || model == MODEL_A8) {
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
||||
if (model == MODEL_A2 || model == MODEL_A7) {
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
if (model == MODEL_A1 || model == MODEL_A6 || model == MODEL_A5 || model == MODEL_AA) {
|
||||
#elif BOARD_MODEL == BOARD_T3S3
|
||||
if (model == MODEL_A1 || model == MODEL_A5 || model == MODEL_A6) {
|
||||
#elif BOARD_MODEL == BOARD_HMBRW
|
||||
if (model == MODEL_FF || model == MODEL_FE) {
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
if (model == MODEL_E4 || model == MODEL_E9 || model == MODEL_E3 || model == MODEL_E8) {
|
||||
#elif BOARD_MODEL == BOARD_TECHO
|
||||
if (model == MODEL_16 || model == MODEL_17) {
|
||||
#elif BOARD_MODEL == BOARD_TDECK
|
||||
if (model == MODEL_D4 || model == MODEL_D9) {
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
if (model == MODEL_DB || model == MODEL_DC) {
|
||||
#elif BOARD_MODEL == BOARD_LORA32_V1_0
|
||||
if (model == MODEL_BA || model == MODEL_BB) {
|
||||
#elif BOARD_MODEL == BOARD_LORA32_V2_0
|
||||
@ -1438,12 +1393,10 @@ bool eeprom_model_valid() {
|
||||
if (model == MODEL_C4 || model == MODEL_C9) {
|
||||
#elif BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
if (model == MODEL_C5 || model == MODEL_CA) {
|
||||
#elif BOARD_MODEL == BOARD_OPENCOM_XL
|
||||
#elif BOARD_MODEL == BOARD_FREENODE
|
||||
if (model == MODEL_21) {
|
||||
#elif BOARD_MODEL == BOARD_HUZZAH32
|
||||
if (model == MODEL_FF) {
|
||||
#elif BOARD_MODEL == BOARD_HMBRW
|
||||
if (model == MODEL_FF || model == MODEL_FE) {
|
||||
#elif BOARD_MODEL == BOARD_GENERIC_ESP32
|
||||
if (model == MODEL_FF || model == MODEL_FE) {
|
||||
#else
|
||||
@ -1501,16 +1454,16 @@ bool eeprom_checksum_valid() {
|
||||
void bt_conf_save(bool is_enabled) {
|
||||
if (is_enabled) {
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_BT), BT_ENABLE_BYTE);
|
||||
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
|
||||
// have to do a flush because we're only writing 1 byte and it syncs after 8
|
||||
eeprom_flush();
|
||||
#endif
|
||||
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
|
||||
// have to do a flush because we're only writing 1 byte and it syncs after 8
|
||||
eeprom_flush();
|
||||
#endif
|
||||
} else {
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_BT), 0x00);
|
||||
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
|
||||
// have to do a flush because we're only writing 1 byte and it syncs after 8
|
||||
eeprom_flush();
|
||||
#endif
|
||||
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
|
||||
// have to do a flush because we're only writing 1 byte and it syncs after 8
|
||||
eeprom_flush();
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
@ -1522,25 +1475,6 @@ void da_conf_save(uint8_t dadr) {
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_DADR), dadr);
|
||||
}
|
||||
|
||||
void db_conf_save(uint8_t val) {
|
||||
#if HAS_DISPLAY
|
||||
if (val == 0x00) {
|
||||
display_blanking_enabled = false;
|
||||
} else {
|
||||
display_blanking_enabled = true;
|
||||
//display_blanking_timeout = val*1000;
|
||||
}
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_BSET), CONF_OK_BYTE);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_DBLK), val);
|
||||
#endif
|
||||
}
|
||||
|
||||
void np_int_conf_save(uint8_t p_int) {
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_PSET), CONF_OK_BYTE);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_PINT), p_int);
|
||||
}
|
||||
|
||||
|
||||
bool eeprom_have_conf() {
|
||||
#if HAS_EEPROM
|
||||
if (EEPROM.read(eeprom_addr(ADDR_CONF_OK)) == CONF_OK_BYTE) {
|
||||
|
||||
@ -3,3 +3,4 @@ board_manager:
|
||||
- https://adafruit.github.io/arduino-board-index/package_adafruit_index.json
|
||||
- https://liberatedsystems.co.uk/rnode-firmware-ce/esp-custom-package.json
|
||||
- https://raw.githubusercontent.com/RAKwireless/RAKwireless-Arduino-BSP-Index/main/package_rakwireless_index.json
|
||||
- http://unsigned.io/arduino/package_unsignedio_UnsignedBoards_index.json
|
||||
|
||||
@ -1,47 +0,0 @@
|
||||
#!/usr/bin/env python3
|
||||
import sys
|
||||
|
||||
try:
|
||||
target_path = sys.argv[1]
|
||||
rxbuf_size = 0; rxbuf_minsize = 6144
|
||||
txbuf_size = 0; txbuf_minsize = 384
|
||||
line_index = 0
|
||||
rx_line_index = 0
|
||||
tx_line_index = 0
|
||||
with open(target_path) as sf:
|
||||
for line in sf:
|
||||
line_index += 1
|
||||
if line.startswith("#define RX_QUEUE_SIZE"):
|
||||
ents = line.split(" ")
|
||||
try:
|
||||
rxbuf_size = int(ents[2])
|
||||
rx_line_index = line_index
|
||||
except Exception as e:
|
||||
print(f"Could not parse Bluetooth RX_QUEUE_SIZE: {e}")
|
||||
|
||||
if line.startswith("#define TX_QUEUE_SIZE"):
|
||||
ents = line.split(" ")
|
||||
try:
|
||||
txbuf_size = int(ents[2])
|
||||
tx_line_index = line_index
|
||||
except Exception as e:
|
||||
print(f"Could not parse Bluetooth RX_QUEUE_SIZE: {e}")
|
||||
|
||||
if rxbuf_size != 0 and txbuf_size != 0:
|
||||
break
|
||||
|
||||
if rxbuf_size < rxbuf_minsize:
|
||||
print(f"Error: The configured ESP32 Bluetooth RX buffer size is too small, please set it to at least {rxbuf_minsize} and try compiling again.")
|
||||
print(f"The buffer configuration can be modified in line {rx_line_index} of: {target_path}")
|
||||
exit(1)
|
||||
|
||||
if txbuf_size < txbuf_minsize:
|
||||
print(f"Error: The configured ESP32 Bluetooth TX buffer size is too small, please set it to at least {txbuf_minsize} and try compiling again.")
|
||||
print(f"The buffer configuration can be modified in line {tx_line_index} of: {target_path}")
|
||||
exit(1)
|
||||
|
||||
exit(0)
|
||||
|
||||
except Exception as e:
|
||||
print(f"Could not determine ESP32 Bluetooth buffer configuration: {e}")
|
||||
print("Please fix this error and try again")
|
||||
@ -1,4 +1,4 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
// Copyright (C) 2023, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
@ -19,7 +19,7 @@
|
||||
|
||||
#if MCU_VARIANT == MCU_NRF52
|
||||
#define INTERFACE_SPI
|
||||
#if BOARD_MODEL == BOARD_OPENCOM_XL
|
||||
#if BOARD_MODEL == BOARD_FREENODE
|
||||
// Required because on RAK4631, non-default SPI pins must be initialised when class is declared.
|
||||
SPIClass interface_spi[1] = {
|
||||
// SX1262
|
||||
@ -74,16 +74,6 @@ volatile bool serial_buffering = false;
|
||||
#include "Console.h"
|
||||
#endif
|
||||
|
||||
#define MODEM_QUEUE_SIZE 4*INTERFACE_COUNT
|
||||
typedef struct {
|
||||
size_t len;
|
||||
int rssi;
|
||||
int snr_raw;
|
||||
uint8_t interface;
|
||||
uint8_t data[];
|
||||
} modem_packet_t;
|
||||
static xQueueHandle modem_packet_queue = NULL;
|
||||
|
||||
char sbuf[128];
|
||||
|
||||
uint8_t *packet_queue[INTERFACE_COUNT];
|
||||
@ -93,18 +83,6 @@ void setup() {
|
||||
boot_seq();
|
||||
EEPROM.begin(EEPROM_SIZE);
|
||||
Serial.setRxBufferSize(CONFIG_UART_BUFFER_SIZE);
|
||||
|
||||
#if BOARD_MODEL == BOARD_TDECK
|
||||
pinMode(pin_poweron, OUTPUT);
|
||||
digitalWrite(pin_poweron, HIGH);
|
||||
|
||||
pinMode(SD_CS, OUTPUT);
|
||||
pinMode(DISPLAY_CS, OUTPUT);
|
||||
digitalWrite(SD_CS, HIGH);
|
||||
digitalWrite(DISPLAY_CS, HIGH);
|
||||
|
||||
pinMode(DISPLAY_BL_PIN, OUTPUT);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_NRF52
|
||||
@ -131,13 +109,9 @@ void setup() {
|
||||
|
||||
Serial.begin(serial_baudrate);
|
||||
|
||||
#if HAS_NP
|
||||
led_init();
|
||||
#endif
|
||||
|
||||
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_RNODE_NG_22 && BOARD_MODEL != BOARD_TBEAM_S_V1 && BOARD_MODEL != BOARD_T3S3 && BOARD_MODEL != BOARD_TECHO && BOARD_MODEL != BOARD_OPENCOM_XL
|
||||
#if BOARD_MODEL != BOARD_FREENODE && BOARD_MODEL != BOARD_RNODE_NG_22
|
||||
// Some boards need to wait until the hardware UART is set up before booting
|
||||
// the full firmware. In the case of the RAK4631/TECHO, the line below will wait
|
||||
// the full firmware. In the case of the RAK4631, the line below will wait
|
||||
// until a serial connection is actually established with a master. Thus, it
|
||||
// is disabled on this platform.
|
||||
while (!Serial);
|
||||
@ -171,10 +145,6 @@ void setup() {
|
||||
memset(packet_starts_buf, 0, sizeof(packet_starts_buf));
|
||||
memset(packet_lengths_buf, 0, sizeof(packet_starts_buf));
|
||||
|
||||
memset(seq, 0xFF, sizeof(seq));
|
||||
|
||||
modem_packet_queue = xQueueCreate(MODEM_QUEUE_SIZE, sizeof(modem_packet_t*));
|
||||
|
||||
for (int i = 0; i < INTERFACE_COUNT; i++) {
|
||||
fifo16_init(&packet_starts[i], packet_starts_buf, CONFIG_QUEUE_MAX_LENGTH+1);
|
||||
fifo16_init(&packet_lengths[i], packet_lengths_buf, CONFIG_QUEUE_MAX_LENGTH+1);
|
||||
@ -185,8 +155,6 @@ void setup() {
|
||||
|
||||
fifo_init(&packet_rdy_interfaces, packet_rdy_interfaces_buf, MAX_INTERFACES);
|
||||
|
||||
// add call to init_channel_stats here? \todo
|
||||
|
||||
// Create and configure interface objects
|
||||
for (uint8_t i = 0; i < INTERFACE_COUNT; i++) {
|
||||
switch (interfaces[i]) {
|
||||
@ -356,76 +324,34 @@ inline void kiss_write_packet(int index) {
|
||||
uint8_t cmd_byte = getInterfaceCommandByte(index);
|
||||
|
||||
serial_write(FEND);
|
||||
|
||||
// Add index of interface the packet came from
|
||||
serial_write(cmd_byte);
|
||||
|
||||
for (uint16_t i = 0; i < read_len; i++) {
|
||||
#if MCU_VARIANT == MCU_NRF52
|
||||
portENTER_CRITICAL();
|
||||
uint8_t byte = pbuf[i];
|
||||
portEXIT_CRITICAL();
|
||||
#else
|
||||
uint8_t byte = pbuf[i];
|
||||
#endif
|
||||
|
||||
uint8_t byte = pbuf[i];
|
||||
portEXIT_CRITICAL();
|
||||
if (byte == FEND) { serial_write(FESC); byte = TFEND; }
|
||||
if (byte == FESC) { serial_write(FESC); byte = TFESC; }
|
||||
serial_write(byte);
|
||||
}
|
||||
|
||||
serial_write(FEND);
|
||||
read_len = 0;
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32 && HAS_BLE
|
||||
bt_flush();
|
||||
#endif
|
||||
packet_ready = false;
|
||||
}
|
||||
|
||||
inline void getPacketData(RadioInterface* radio, uint16_t len) {
|
||||
#if MCU_VARIANT != MCU_NRF52
|
||||
while (len-- && read_len < MTU) {
|
||||
pbuf[read_len++] = radio->read();
|
||||
}
|
||||
#else
|
||||
BaseType_t int_mask = taskENTER_CRITICAL_FROM_ISR();
|
||||
while (len-- && read_len < MTU) {
|
||||
pbuf[read_len++] = radio->read();
|
||||
}
|
||||
taskEXIT_CRITICAL_FROM_ISR(int_mask);
|
||||
#endif
|
||||
BaseType_t mask = taskENTER_CRITICAL_FROM_ISR();
|
||||
while (len-- && read_len < MTU) {
|
||||
pbuf[read_len++] = radio->read();
|
||||
}
|
||||
taskEXIT_CRITICAL_FROM_ISR(mask);
|
||||
}
|
||||
|
||||
inline bool queue_packet(RadioInterface* radio, uint8_t index) {
|
||||
// Allocate packet struct, but abort if there
|
||||
// is not enough memory available.
|
||||
modem_packet_t *modem_packet = (modem_packet_t*)malloc(sizeof(modem_packet_t) + read_len);
|
||||
if(!modem_packet) { memory_low = true; return false; }
|
||||
|
||||
// Get packet RSSI and SNR
|
||||
modem_packet->snr_raw = radio->packetSnrRaw();
|
||||
|
||||
// Pass raw SNR to get RSSI as SX127X driver requires it for calculations
|
||||
modem_packet->rssi = radio->packetRssi(modem_packet->snr_raw);
|
||||
|
||||
modem_packet->interface = index;
|
||||
|
||||
// Send packet to event queue, but free the
|
||||
// allocated memory again if the queue is
|
||||
// unable to receive the packet.
|
||||
modem_packet->len = read_len;
|
||||
memcpy(modem_packet->data, pbuf, read_len);
|
||||
if (!modem_packet_queue || xQueueSendFromISR(modem_packet_queue, &modem_packet, NULL) != pdPASS) {
|
||||
free(modem_packet);
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
void ISR_VECT receive_callback(uint8_t index, int packet_size) {
|
||||
selected_radio = interface_obj[index];
|
||||
void receive_callback(uint8_t index, int packet_size) {
|
||||
selected_radio = interface_obj[index];
|
||||
bool ready = false;
|
||||
|
||||
BaseType_t int_mask;
|
||||
if (!promisc) {
|
||||
// The standard operating mode allows large
|
||||
// packets with a payload up to 500 bytes,
|
||||
@ -436,41 +362,37 @@ void ISR_VECT receive_callback(uint8_t index, int packet_size) {
|
||||
uint8_t header = selected_radio->read(); packet_size--;
|
||||
uint8_t sequence = packetSequence(header);
|
||||
|
||||
if (isSplitPacket(header) && seq[index] == SEQ_UNSET) {
|
||||
if (isSplitPacket(header) && seq == SEQ_UNSET) {
|
||||
// This is the first part of a split
|
||||
// packet, so we set the seq variable
|
||||
// and add the data to the buffer
|
||||
#if MCU_VARIANT == MCU_NRF52
|
||||
int_mask = taskENTER_CRITICAL_FROM_ISR(); read_len = 0; taskEXIT_CRITICAL_FROM_ISR(int_mask);
|
||||
#else
|
||||
read_len = 0;
|
||||
#endif
|
||||
|
||||
seq[index] = sequence;
|
||||
BaseType_t mask = taskENTER_CRITICAL_FROM_ISR();
|
||||
read_len = 0;
|
||||
seq = sequence;
|
||||
taskEXIT_CRITICAL_FROM_ISR(mask);
|
||||
|
||||
getPacketData(selected_radio, packet_size);
|
||||
|
||||
} else if (isSplitPacket(header) && seq[index] == sequence) {
|
||||
} else if (isSplitPacket(header) && seq == sequence) {
|
||||
// This is the second part of a split
|
||||
// packet, so we add it to the buffer
|
||||
// and set the ready flag.
|
||||
|
||||
getPacketData(selected_radio, packet_size);
|
||||
|
||||
seq[index] = SEQ_UNSET;
|
||||
ready = true;
|
||||
seq = SEQ_UNSET;
|
||||
packet_interface = index;
|
||||
packet_ready = true;
|
||||
|
||||
} else if (isSplitPacket(header) && seq[index] != sequence) {
|
||||
} else if (isSplitPacket(header) && seq != sequence) {
|
||||
// This split packet does not carry the
|
||||
// same sequence id, so we must assume
|
||||
// that we are seeing the first part of
|
||||
// a new split packet.
|
||||
#if MCU_VARIANT == MCU_NRF52
|
||||
int_mask = taskENTER_CRITICAL_FROM_ISR(); read_len = 0; taskEXIT_CRITICAL_FROM_ISR(int_mask);
|
||||
#else
|
||||
read_len = 0;
|
||||
#endif
|
||||
seq[index] = sequence;
|
||||
BaseType_t mask = taskENTER_CRITICAL_FROM_ISR();
|
||||
read_len = 0;
|
||||
seq = sequence;
|
||||
taskEXIT_CRITICAL_FROM_ISR(mask);
|
||||
|
||||
getPacketData(selected_radio, packet_size);
|
||||
|
||||
@ -479,33 +401,31 @@ void ISR_VECT receive_callback(uint8_t index, int packet_size) {
|
||||
// just read it and set the ready
|
||||
// flag to true.
|
||||
|
||||
if (seq[index] != SEQ_UNSET) {
|
||||
if (seq != SEQ_UNSET) {
|
||||
// If we already had part of a split
|
||||
// packet in the buffer, we clear it.
|
||||
#if MCU_VARIANT == MCU_NRF52
|
||||
int_mask = taskENTER_CRITICAL_FROM_ISR(); read_len = 0; taskEXIT_CRITICAL_FROM_ISR(int_mask);
|
||||
#else
|
||||
read_len = 0;
|
||||
#endif
|
||||
seq[index] = SEQ_UNSET;
|
||||
BaseType_t mask = taskENTER_CRITICAL_FROM_ISR();
|
||||
read_len = 0;
|
||||
seq = SEQ_UNSET;
|
||||
taskEXIT_CRITICAL_FROM_ISR(mask);
|
||||
}
|
||||
|
||||
getPacketData(selected_radio, packet_size);
|
||||
|
||||
ready = true;
|
||||
packet_interface = index;
|
||||
packet_ready = true;
|
||||
}
|
||||
} else {
|
||||
// In promiscuous mode, raw packets are
|
||||
// output directly to the host
|
||||
BaseType_t mask = taskENTER_CRITICAL_FROM_ISR();
|
||||
read_len = 0;
|
||||
taskEXIT_CRITICAL_FROM_ISR(mask);
|
||||
|
||||
getPacketData(selected_radio, packet_size);
|
||||
|
||||
ready = true;
|
||||
}
|
||||
|
||||
if (ready) {
|
||||
queue_packet(selected_radio, index);
|
||||
packet_interface = index;
|
||||
packet_ready = true;
|
||||
}
|
||||
|
||||
last_rx = millis();
|
||||
@ -616,9 +536,6 @@ void flushQueue(RadioInterface* radio) {
|
||||
queued_bytes[index] = 0;
|
||||
selected_radio->updateAirtime();
|
||||
queue_flushing = false;
|
||||
#if HAS_DISPLAY
|
||||
display_tx = true;
|
||||
#endif
|
||||
}
|
||||
|
||||
void transmit(RadioInterface* radio, uint16_t size) {
|
||||
@ -640,9 +557,7 @@ void transmit(RadioInterface* radio, uint16_t size) {
|
||||
|
||||
written++;
|
||||
|
||||
// Only start a new packet if this is a split packet and it has
|
||||
// exceeded the length of a single packet
|
||||
if (written == 255 && header & 0x0F) {
|
||||
if (written == 255) {
|
||||
radio->endPacket(); radio->addAirtime(written);
|
||||
radio->beginPacket();
|
||||
radio->write(header);
|
||||
@ -650,14 +565,7 @@ void transmit(RadioInterface* radio, uint16_t size) {
|
||||
}
|
||||
}
|
||||
|
||||
if (!radio->endPacket()) {
|
||||
kiss_indicate_error(ERROR_MODEM_TIMEOUT);
|
||||
kiss_indicate_error(ERROR_TXFAILED);
|
||||
led_indicate_error(5);
|
||||
hard_reset();
|
||||
}
|
||||
radio->addAirtime(written);
|
||||
|
||||
radio->endPacket(); radio->addAirtime(written);
|
||||
} else {
|
||||
// In promiscuous mode, we only send out
|
||||
// plain raw LoRa packets with a maximum
|
||||
@ -892,7 +800,6 @@ void serialCallback(uint8_t sbyte) {
|
||||
kiss_indicate_implicit_length();
|
||||
} else if (command == CMD_LEAVE) {
|
||||
if (sbyte == 0xFF) {
|
||||
//display_unblank();
|
||||
cable_state = CABLE_STATE_DISCONNECTED;
|
||||
//current_rssi = -292;
|
||||
last_rssi = -292;
|
||||
@ -1134,13 +1041,7 @@ void serialCallback(uint8_t sbyte) {
|
||||
bt_start();
|
||||
bt_conf_save(true);
|
||||
} else if (sbyte == 0x02) {
|
||||
if (bt_state == BT_STATE_OFF) {
|
||||
bt_start();
|
||||
bt_conf_save(true);
|
||||
}
|
||||
if (bt_state != BT_STATE_CONNECTED) {
|
||||
bt_enable_pairing();
|
||||
}
|
||||
bt_enable_pairing();
|
||||
}
|
||||
#endif
|
||||
} else if (command == CMD_DISP_INT) {
|
||||
@ -1155,7 +1056,6 @@ void serialCallback(uint8_t sbyte) {
|
||||
}
|
||||
display_intensity = sbyte;
|
||||
di_conf_save(display_intensity);
|
||||
//display_unblank();
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -1189,37 +1089,6 @@ void serialCallback(uint8_t sbyte) {
|
||||
if (frame_len == FW_LENGTH_LEN) {
|
||||
set_fw_length(cmdbuf);
|
||||
}
|
||||
} else if (command == CMD_DISP_BLNK) {
|
||||
#if HAS_DISPLAY
|
||||
if (sbyte == FESC) {
|
||||
ESCAPE = true;
|
||||
} else {
|
||||
if (ESCAPE) {
|
||||
if (sbyte == TFEND) sbyte = FEND;
|
||||
if (sbyte == TFESC) sbyte = FESC;
|
||||
ESCAPE = false;
|
||||
}
|
||||
db_conf_save(sbyte);
|
||||
//display_unblank();
|
||||
}
|
||||
|
||||
#endif
|
||||
} else if (command == CMD_NP_INT) {
|
||||
#if HAS_NP
|
||||
if (sbyte == FESC) {
|
||||
ESCAPE = true;
|
||||
} else {
|
||||
if (ESCAPE) {
|
||||
if (sbyte == TFEND) sbyte = FEND;
|
||||
if (sbyte == TFESC) sbyte = FESC;
|
||||
ESCAPE = false;
|
||||
}
|
||||
sbyte;
|
||||
led_set_intensity(sbyte);
|
||||
np_int_conf_save(sbyte);
|
||||
}
|
||||
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -1285,7 +1154,7 @@ void validate_status() {
|
||||
}
|
||||
} else {
|
||||
hw_ready = false;
|
||||
Serial.write("No radio module found\r\n");
|
||||
Serial.write("No valid radio module found\r\n");
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
device_init_done = true;
|
||||
@ -1295,7 +1164,6 @@ void validate_status() {
|
||||
}
|
||||
} else {
|
||||
hw_ready = false;
|
||||
Serial.write("Invalid EEPROM checksum\r\n");
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
device_init_done = true;
|
||||
@ -1305,7 +1173,6 @@ void validate_status() {
|
||||
}
|
||||
} else {
|
||||
hw_ready = false;
|
||||
Serial.write("Invalid EEPROM configuration\r\n");
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
device_init_done = true;
|
||||
@ -1315,7 +1182,6 @@ void validate_status() {
|
||||
}
|
||||
} else {
|
||||
hw_ready = false;
|
||||
Serial.write("Device unprovisioned, no device configuration found in EEPROM\r\n");
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
device_init_done = true;
|
||||
@ -1334,42 +1200,26 @@ void validate_status() {
|
||||
#endif
|
||||
led_indicate_boot_error();
|
||||
}
|
||||
Scheduler.startLoop(input_read);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
modem_packet_t *modem_packet = NULL;
|
||||
if(modem_packet_queue && xQueueReceive(modem_packet_queue, &modem_packet, 0) == pdTRUE && modem_packet) {
|
||||
read_len = modem_packet->len;
|
||||
last_rssi = modem_packet->rssi;
|
||||
last_snr_raw = modem_packet->snr_raw;
|
||||
packet_interface = modem_packet->interface;
|
||||
memcpy(&pbuf, modem_packet->data, modem_packet->len);
|
||||
free(modem_packet);
|
||||
modem_packet = NULL;
|
||||
|
||||
if (packet_ready) {
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
portENTER_CRITICAL(&update_lock);
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
portENTER_CRITICAL();
|
||||
#endif
|
||||
last_rssi = selected_radio->packetRssi();
|
||||
last_snr_raw = selected_radio->packetSnrRaw();
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
portEXIT_CRITICAL(&update_lock);
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
portEXIT_CRITICAL();
|
||||
#endif
|
||||
kiss_indicate_stat_rssi();
|
||||
kiss_indicate_stat_snr();
|
||||
kiss_write_packet(packet_interface);
|
||||
}
|
||||
|
||||
#elif MCU_VARIANT == MCU_NRF52
|
||||
modem_packet_t *modem_packet = NULL;
|
||||
if(modem_packet_queue && xQueueReceive(modem_packet_queue, &modem_packet, 0) == pdTRUE && modem_packet) {
|
||||
memcpy(&pbuf, modem_packet->data, modem_packet->len);
|
||||
read_len = modem_packet->len;
|
||||
last_rssi = modem_packet->rssi;
|
||||
last_snr_raw = modem_packet->snr_raw;
|
||||
packet_interface = modem_packet->interface;
|
||||
free(modem_packet);
|
||||
modem_packet = NULL;
|
||||
|
||||
kiss_indicate_stat_rssi();
|
||||
kiss_indicate_stat_snr();
|
||||
kiss_write_packet(packet_interface);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
bool ready = false;
|
||||
for (int i = 0; i < INTERFACE_COUNT; i++) {
|
||||
@ -1390,6 +1240,19 @@ void loop() {
|
||||
continue;
|
||||
}
|
||||
|
||||
// If a higher data rate interface has received a packet after its
|
||||
// loop, it still needs to be the first to transmit, so check if this
|
||||
// is the case.
|
||||
for (int j = 0; j < INTERFACE_COUNT; j++) {
|
||||
if (!interface_obj_sorted[j]->calculateALock() && interface_obj_sorted[j]->getRadioOnline()) {
|
||||
if (interface_obj_sorted[j]->getBitrate() > selected_radio->getBitrate()) {
|
||||
if (queue_height[interface_obj_sorted[j]->getIndex()] > 0) {
|
||||
selected_radio = interface_obj_sorted[j];
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (queue_height[selected_radio->getIndex()] > 0) {
|
||||
uint32_t check_time = millis();
|
||||
if (check_time > selected_radio->getPostTxYieldTimeout()) {
|
||||
@ -1465,20 +1328,13 @@ void loop() {
|
||||
if (!console_active && bt_ready) update_bt();
|
||||
#endif
|
||||
|
||||
#if HAS_INPUT
|
||||
input_read();
|
||||
#endif
|
||||
|
||||
#if HAS_BUZZER
|
||||
update_buzzer_notone();
|
||||
#endif
|
||||
if (memory_low) {
|
||||
#if PLATFORM == PLATFORM_ESP32
|
||||
if (esp_get_free_heap_size() < 8192) {
|
||||
kiss_indicate_error(ERROR_MEMORY_LOW); memory_low = false;
|
||||
} else {
|
||||
memory_low = false;
|
||||
}
|
||||
#else
|
||||
kiss_indicate_error(ERROR_MEMORY_LOW); memory_low = false;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
void process_serial() {
|
||||
@ -1491,7 +1347,6 @@ void button_event(uint8_t event, unsigned long duration) {
|
||||
if (duration > BUTTON_MIN_DURATION) {
|
||||
if (duration > BUTTON_6S_DURATION) {
|
||||
bt_stop();
|
||||
bt_conf_save(false);
|
||||
} else if (duration > BUTTON_3S_DURATION) {
|
||||
bt_enable_pairing();
|
||||
} else {
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
#!/usr/bin/env python3
|
||||
|
||||
# Copyright (C) 2024, Mark Qvist
|
||||
# Copyright (C) 2023, Mark Qvist
|
||||
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
#!/bin/python3
|
||||
|
||||
# Copyright (C) 2024, Mark Qvist
|
||||
# Copyright (C) 2023, Mark Qvist
|
||||
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
|
||||
@ -1,155 +0,0 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
// the Free Software Foundation, either version 3 of the License, or
|
||||
// (at your option) any later version.
|
||||
|
||||
// This program is distributed in the hope that it will be useful,
|
||||
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
// GNU General Public License for more details.
|
||||
|
||||
// You should have received a copy of the GNU General Public License
|
||||
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
||||
// This class is for BLE serial functionality on ESP32 boards ONLY
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "../../Boards.h"
|
||||
|
||||
#if PLATFORM != PLATFORM_NRF52
|
||||
#if HAS_BLE
|
||||
|
||||
#include "BLESerial.h"
|
||||
|
||||
uint32_t bt_passkey_callback();
|
||||
void bt_passkey_notify_callback(uint32_t passkey);
|
||||
bool bt_security_request_callback();
|
||||
void bt_authentication_complete_callback(esp_ble_auth_cmpl_t auth_result);
|
||||
bool bt_confirm_pin_callback(uint32_t pin);
|
||||
void bt_connect_callback(BLEServer *server);
|
||||
void bt_disconnect_callback(BLEServer *server);
|
||||
bool bt_client_authenticated();
|
||||
|
||||
uint32_t BLESerial::onPassKeyRequest() { return bt_passkey_callback(); }
|
||||
void BLESerial::onPassKeyNotify(uint32_t passkey) { bt_passkey_notify_callback(passkey); }
|
||||
bool BLESerial::onSecurityRequest() { return bt_security_request_callback(); }
|
||||
void BLESerial::onAuthenticationComplete(esp_ble_auth_cmpl_t auth_result) { bt_authentication_complete_callback(auth_result); }
|
||||
void BLESerial::onConnect(BLEServer *server) { bt_connect_callback(server); }
|
||||
void BLESerial::onDisconnect(BLEServer *server) { bt_disconnect_callback(server); ble_server->startAdvertising(); }
|
||||
bool BLESerial::onConfirmPIN(uint32_t pin) { return bt_confirm_pin_callback(pin); };
|
||||
bool BLESerial::connected() { return ble_server->getConnectedCount() > 0; }
|
||||
|
||||
int BLESerial::read() {
|
||||
int result = this->rx_buffer.pop();
|
||||
if (result == '\n') { this->numAvailableLines--; }
|
||||
return result;
|
||||
}
|
||||
|
||||
size_t BLESerial::readBytes(uint8_t *buffer, size_t bufferSize) {
|
||||
int i = 0;
|
||||
while (i < bufferSize && available()) { buffer[i] = (uint8_t)this->rx_buffer.pop(); i++; }
|
||||
return i;
|
||||
}
|
||||
|
||||
int BLESerial::peek() {
|
||||
if (this->rx_buffer.getLength() == 0) return -1;
|
||||
return this->rx_buffer.get(0);
|
||||
}
|
||||
|
||||
int BLESerial::available() { return this->rx_buffer.getLength(); }
|
||||
|
||||
size_t BLESerial::print(const char *str) {
|
||||
if (ble_server->getConnectedCount() <= 0) return 0;
|
||||
size_t written = 0; for (size_t i = 0; str[i] != '\0'; i++) { written += this->write(str[i]); }
|
||||
flush();
|
||||
|
||||
return written;
|
||||
}
|
||||
|
||||
size_t BLESerial::write(const uint8_t *buffer, size_t bufferSize) {
|
||||
if (ble_server->getConnectedCount() <= 0) { return 0; } else {
|
||||
size_t written = 0; for (int i = 0; i < bufferSize; i++) { written += this->write(buffer[i]); }
|
||||
flush();
|
||||
|
||||
return written;
|
||||
}
|
||||
}
|
||||
|
||||
size_t BLESerial::write(uint8_t byte) {
|
||||
if (bt_client_authenticated()) {
|
||||
if (ble_server->getConnectedCount() <= 0) { return 0; } else {
|
||||
this->transmitBuffer[this->transmitBufferLength] = byte;
|
||||
this->transmitBufferLength++;
|
||||
if (this->transmitBufferLength == maxTransferSize) { flush(); }
|
||||
return 1;
|
||||
}
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
void BLESerial::flush() {
|
||||
if (this->transmitBufferLength > 0) {
|
||||
TxCharacteristic->setValue(this->transmitBuffer, this->transmitBufferLength);
|
||||
this->transmitBufferLength = 0;
|
||||
this->lastFlushTime = millis();
|
||||
TxCharacteristic->notify(true);
|
||||
}
|
||||
}
|
||||
|
||||
void BLESerial::begin(const char *name) {
|
||||
ConnectedDeviceCount = 0;
|
||||
BLEDevice::init(name);
|
||||
|
||||
esp_ble_tx_power_set(ESP_BLE_PWR_TYPE_DEFAULT, ESP_PWR_LVL_P9);
|
||||
esp_ble_tx_power_set(ESP_BLE_PWR_TYPE_ADV, ESP_PWR_LVL_P9);
|
||||
esp_ble_tx_power_set(ESP_BLE_PWR_TYPE_SCAN ,ESP_PWR_LVL_P9);
|
||||
|
||||
ble_server = BLEDevice::createServer();
|
||||
ble_server->setCallbacks(this);
|
||||
BLEDevice::setEncryptionLevel(ESP_BLE_SEC_ENCRYPT_MITM);
|
||||
BLEDevice::setSecurityCallbacks(this);
|
||||
|
||||
SetupSerialService();
|
||||
|
||||
ble_adv = BLEDevice::getAdvertising();
|
||||
ble_adv->addServiceUUID(BLE_SERIAL_SERVICE_UUID);
|
||||
ble_adv->setMinPreferred(0x20);
|
||||
ble_adv->setMaxPreferred(0x40);
|
||||
ble_adv->setScanResponse(true);
|
||||
ble_adv->start();
|
||||
}
|
||||
|
||||
void BLESerial::end() { BLEDevice::deinit(); }
|
||||
|
||||
void BLESerial::onWrite(BLECharacteristic *characteristic) {
|
||||
if (characteristic->getUUID().toString() == BLE_RX_UUID) {
|
||||
auto value = characteristic->getValue();
|
||||
for (int i = 0; i < value.length(); i++) { rx_buffer.push(value[i]); }
|
||||
}
|
||||
}
|
||||
|
||||
void BLESerial::SetupSerialService() {
|
||||
SerialService = ble_server->createService(BLE_SERIAL_SERVICE_UUID);
|
||||
|
||||
RxCharacteristic = SerialService->createCharacteristic(BLE_RX_UUID, BLECharacteristic::PROPERTY_WRITE);
|
||||
RxCharacteristic->setAccessPermissions(ESP_GATT_PERM_WRITE_ENC_MITM);
|
||||
RxCharacteristic->addDescriptor(new BLE2902());
|
||||
RxCharacteristic->setWriteProperty(true);
|
||||
RxCharacteristic->setCallbacks(this);
|
||||
|
||||
TxCharacteristic = SerialService->createCharacteristic(BLE_TX_UUID, BLECharacteristic::PROPERTY_NOTIFY);
|
||||
TxCharacteristic->setAccessPermissions(ESP_GATT_PERM_READ_ENC_MITM);
|
||||
TxCharacteristic->addDescriptor(new BLE2902());
|
||||
TxCharacteristic->setNotifyProperty(true);
|
||||
TxCharacteristic->setReadProperty(true);
|
||||
|
||||
SerialService->start();
|
||||
}
|
||||
|
||||
BLESerial::BLESerial() { }
|
||||
|
||||
#endif
|
||||
#endif
|
||||
@ -1,135 +0,0 @@
|
||||
// Copyright (C) 2024, Mark Qvist
|
||||
|
||||
// This program is free software: you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
// the Free Software Foundation, either version 3 of the License, or
|
||||
// (at your option) any later version.
|
||||
|
||||
// This program is distributed in the hope that it will be useful,
|
||||
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
// GNU General Public License for more details.
|
||||
|
||||
// You should have received a copy of the GNU General Public License
|
||||
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
||||
// This class is for BLE serial functionality on ESP32 boards ONLY
|
||||
|
||||
#include "../../Boards.h"
|
||||
|
||||
#if PLATFORM != PLATFORM_NRF52
|
||||
#if HAS_BLE
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
#include <BLEDevice.h>
|
||||
#include <BLEUtils.h>
|
||||
#include <BLEServer.h>
|
||||
#include <BLE2902.h>
|
||||
|
||||
template <size_t n>
|
||||
class BLEFIFO {
|
||||
private:
|
||||
uint8_t buffer[n];
|
||||
int head = 0;
|
||||
int tail = 0;
|
||||
|
||||
public:
|
||||
void push(uint8_t value) {
|
||||
buffer[head] = value;
|
||||
head = (head + 1) % n;
|
||||
if (head == tail) { tail = (tail + 1) % n; }
|
||||
}
|
||||
|
||||
int pop() {
|
||||
if (head == tail) {
|
||||
return -1;
|
||||
} else {
|
||||
uint8_t value = buffer[tail];
|
||||
tail = (tail + 1) % n;
|
||||
return value;
|
||||
}
|
||||
}
|
||||
|
||||
void clear() { head = 0; tail = 0; }
|
||||
|
||||
int get(size_t index) {
|
||||
if (index >= this->getLength()) {
|
||||
return -1;
|
||||
} else {
|
||||
return buffer[(tail + index) % n];
|
||||
}
|
||||
}
|
||||
|
||||
size_t getLength() {
|
||||
if (head >= tail) {
|
||||
return head - tail;
|
||||
} else {
|
||||
return n - tail + head;
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
#define RX_BUFFER_SIZE 6144
|
||||
#define BLE_BUFFER_SIZE 512 // Must fit in max GATT attribute length
|
||||
#define MIN_MTU 50
|
||||
|
||||
class BLESerial : public BLECharacteristicCallbacks, public BLEServerCallbacks, public BLESecurityCallbacks, public Stream {
|
||||
public:
|
||||
BLESerial();
|
||||
|
||||
void begin(const char *name);
|
||||
void end();
|
||||
void onWrite(BLECharacteristic *characteristic);
|
||||
int available();
|
||||
int peek();
|
||||
int read();
|
||||
size_t readBytes(uint8_t *buffer, size_t bufferSize);
|
||||
size_t write(uint8_t byte);
|
||||
size_t write(const uint8_t *buffer, size_t bufferSize);
|
||||
size_t print(const char *value);
|
||||
void flush();
|
||||
void onConnect(BLEServer *server);
|
||||
void onDisconnect(BLEServer *server);
|
||||
|
||||
uint32_t onPassKeyRequest();
|
||||
void onPassKeyNotify(uint32_t passkey);
|
||||
bool onSecurityRequest();
|
||||
void onAuthenticationComplete(esp_ble_auth_cmpl_t);
|
||||
bool onConfirmPIN(uint32_t pin);
|
||||
|
||||
bool connected();
|
||||
|
||||
BLEServer *ble_server;
|
||||
BLEAdvertising *ble_adv;
|
||||
BLEService *SerialService;
|
||||
BLECharacteristic *TxCharacteristic;
|
||||
BLECharacteristic *RxCharacteristic;
|
||||
size_t transmitBufferLength;
|
||||
unsigned long long lastFlushTime;
|
||||
|
||||
private:
|
||||
BLESerial(BLESerial const &other) = delete;
|
||||
void operator=(BLESerial const &other) = delete;
|
||||
|
||||
BLEFIFO<RX_BUFFER_SIZE> rx_buffer;
|
||||
size_t numAvailableLines;
|
||||
uint8_t transmitBuffer[BLE_BUFFER_SIZE];
|
||||
|
||||
int ConnectedDeviceCount;
|
||||
void SetupSerialService();
|
||||
|
||||
uint16_t peerMTU;
|
||||
uint16_t maxTransferSize = BLE_BUFFER_SIZE;
|
||||
|
||||
bool checkMTU();
|
||||
|
||||
const char *BLE_SERIAL_SERVICE_UUID = "6e400001-b5a3-f393-e0a9-e50e24dcca9e";
|
||||
const char *BLE_RX_UUID = "6e400002-b5a3-f393-e0a9-e50e24dcca9e";
|
||||
const char *BLE_TX_UUID = "6e400003-b5a3-f393-e0a9-e50e24dcca9e";
|
||||
|
||||
bool started = false;
|
||||
};
|
||||
|
||||
#endif
|
||||
#endif
|
||||
Loading…
x
Reference in New Issue
Block a user