697 lines
19 KiB
C
697 lines
19 KiB
C
// Copyright (C) 2024, Mark Qvist
|
|
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
|
|
// You should have received a copy of the GNU General Public License
|
|
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
#include "Interfaces.h"
|
|
|
|
#ifndef BOARDS_H
|
|
#define BOARDS_H
|
|
|
|
#define PLATFORM_ESP32 0x80
|
|
#define PLATFORM_NRF52 0x70
|
|
|
|
#define MCU_ESP32 0x81
|
|
#define MCU_NRF52 0x71
|
|
|
|
#define BOARD_RNODE 0x31
|
|
#define BOARD_HMBRW 0x32
|
|
#define BOARD_TBEAM 0x33
|
|
#define BOARD_HUZZAH32 0x34
|
|
#define BOARD_GENERIC_ESP32 0x35
|
|
#define BOARD_LORA32_V2_0 0x36
|
|
#define BOARD_LORA32_V2_1 0x37
|
|
#define BOARD_LORA32_V1_0 0x39
|
|
#define BOARD_HELTEC32_V2 0x38
|
|
#define BOARD_HELTEC32_V3 0x3A
|
|
#define BOARD_RNODE_NG_20 0x40
|
|
#define BOARD_RNODE_NG_21 0x41
|
|
#define BOARD_RNODE_NG_22 0x42
|
|
#define BOARD_GENERIC_NRF52 0x50
|
|
#define BOARD_RAK4631 0x51
|
|
|
|
#define OLED 0x01
|
|
#define EINK_BW 0x02
|
|
#define EINK_3C 0x03
|
|
|
|
#if defined(ESP32)
|
|
#define PLATFORM PLATFORM_ESP32
|
|
#define MCU_VARIANT MCU_ESP32
|
|
#elif defined(NRF52840_XXAA)
|
|
#include <variant.h>
|
|
#define PLATFORM PLATFORM_NRF52
|
|
#define MCU_VARIANT MCU_NRF52
|
|
#else
|
|
#error "The firmware cannot be compiled for the selected MCU variant"
|
|
#endif
|
|
|
|
#define HAS_DISPLAY false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE false
|
|
#define HAS_TCXO false
|
|
#define HAS_PMU false
|
|
#define HAS_NP false
|
|
#define HAS_EEPROM false
|
|
#define HAS_INPUT false
|
|
#define HAS_SLEEP false
|
|
#define PIN_DISP_SLEEP -1
|
|
#define VALIDATE_FIRMWARE true
|
|
|
|
#if defined(ENABLE_TCXO)
|
|
#define HAS_TCXO true
|
|
#endif
|
|
|
|
#if MCU_VARIANT == MCU_ESP32
|
|
|
|
// Board models for ESP32 based builds are
|
|
// defined by the build target in the makefile.
|
|
// If you are not using make to compile this
|
|
// firmware, you can manually define model here.
|
|
//
|
|
// #define BOARD_MODEL BOARD_GENERIC_ESP32
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_0_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
|
|
#define EEPROM_SIZE 1024
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
|
|
#define GPS_BAUD_RATE 9600
|
|
#define PIN_GPS_TX 12
|
|
#define PIN_GPS_RX 34
|
|
|
|
#if BOARD_MODEL == BOARD_GENERIC_ESP32
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
const int pin_led_rx = 14;
|
|
const int pin_led_tx = 32;
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX127X
|
|
{
|
|
true, // DEFAULT_SPI
|
|
false, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX127X
|
|
{
|
|
4, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
39, // pin_dio
|
|
36, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_TBEAM
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_PMU true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
#define I2C_SDA 21
|
|
#define I2C_SCL 22
|
|
#define PMU_IRQ 35
|
|
#define INTERFACE_COUNT 1
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 4;
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX1262
|
|
{
|
|
true, // DEFAULT_SPI
|
|
true, // HAS_TCXO
|
|
true // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX1262
|
|
{
|
|
18, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
32, // pin_busy
|
|
33, // pin_dio
|
|
23, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_HUZZAH32
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
const int pin_led_rx = 14;
|
|
const int pin_led_tx = 32;
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX127X
|
|
{
|
|
true, // DEFAULT_SPI
|
|
false, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX1262
|
|
{
|
|
4, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
39, // pin_dio
|
|
36, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V1_0
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 14;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 2;
|
|
#else
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 2;
|
|
#endif
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX1276};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX1276
|
|
{
|
|
true, // DEFAULT_SPI
|
|
false, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX1276
|
|
{
|
|
18, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
26, // pin_dio
|
|
14, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V2_0
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 12;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 0;
|
|
#else
|
|
const int pin_led_rx = 22;
|
|
const int pin_led_tx = 22;
|
|
#endif
|
|
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX127X
|
|
{
|
|
true, // DEFAULT_SPI
|
|
false, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX127X
|
|
{
|
|
18, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
26, // pin_dio
|
|
14, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V2_1
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
|
|
#if HAS_TCXO == true
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX127X
|
|
{
|
|
true, // DEFAULT_SPI
|
|
true, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX127X
|
|
{
|
|
18, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
26, // pin_dio
|
|
23, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
33 // pin_tcxo_enable
|
|
}
|
|
};
|
|
#endif
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 15;
|
|
const int pin_led_tx = 4;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
|
|
#if HAS_TCXO == false
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX127X
|
|
{
|
|
true, // DEFAULT_SPI
|
|
false, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX127X
|
|
{
|
|
18, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
26, // pin_dio
|
|
23, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_HELTEC32_V2
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 36;
|
|
const int pin_led_tx = 37;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX127X
|
|
{
|
|
true, // DEFAULT_SPI
|
|
false, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX127X
|
|
{
|
|
18, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
26, // pin_dio
|
|
14, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_HELTEC32_V3
|
|
#define IS_ESP32S3 true
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE false
|
|
#define HAS_EEPROM true
|
|
#define HAS_INPUT true
|
|
#define HAS_SLEEP true
|
|
#define PIN_WAKEUP GPIO_NUM_0
|
|
#define WAKEUP_LEVEL 0
|
|
#define INTERFACE_COUNT 1
|
|
|
|
const int pin_btn_usr1 = 0;
|
|
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 13;
|
|
const int pin_led_tx = 14;
|
|
#else
|
|
const int pin_led_rx = 35;
|
|
const int pin_led_tx = 35;
|
|
#endif
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX1262
|
|
{
|
|
true, // DEFAULT_SPI
|
|
true, // HAS_TCXO
|
|
true // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX1262
|
|
{
|
|
8, // pin_ss
|
|
9, // pin_sclk
|
|
10, // pin_mosi
|
|
11, // pin_miso
|
|
13, // pin_busy
|
|
14, // pin_dio
|
|
12, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_20
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_NP true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 12;
|
|
const int pin_dio = 26;
|
|
const int pin_np = 4;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 0;
|
|
#else
|
|
const int pin_led_rx = 22;
|
|
const int pin_led_tx = 22;
|
|
#endif
|
|
#endif
|
|
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX1276};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX1276
|
|
{
|
|
false, // DEFAULT_SPI
|
|
true, // HAS_TCXO
|
|
true // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX1276
|
|
{
|
|
8, // pin_ss
|
|
9, // pin_sclk
|
|
10, // pin_mosi
|
|
11, // pin_miso
|
|
13, // pin_busy
|
|
14, // pin_dio
|
|
12, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP true
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
#define INTERFACE_COUNT 1
|
|
const int pin_np = 12;
|
|
const int pin_dac = 25;
|
|
const int pin_adc = 34;
|
|
const int SD_MISO = 2;
|
|
const int SD_MOSI = 15;
|
|
const int SD_CLK = 14;
|
|
const int SD_CS = 13;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 12;
|
|
const int pin_led_tx = 4;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
#endif
|
|
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX127X
|
|
{
|
|
true, // DEFAULT_SPI
|
|
false, // HAS_TCXO
|
|
false // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX127X
|
|
{
|
|
18, // pin_ss
|
|
-1, // pin_sclk
|
|
-1, // pin_mosi
|
|
-1, // pin_miso
|
|
-1, // pin_busy
|
|
26, // pin_dio
|
|
23, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
|
#define IS_ESP32S3 true
|
|
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY OLED
|
|
#define HAS_CONSOLE false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
|
|
#define HAS_INPUT true
|
|
#define HAS_SLEEP true
|
|
#define PIN_WAKEUP GPIO_NUM_0
|
|
#define WAKEUP_LEVEL 0
|
|
#define INTERFACE_COUNT 1
|
|
// #define PIN_DISP_SLEEP 21
|
|
// #define DISP_SLEEP_LEVEL HIGH
|
|
const int pin_btn_usr1 = 0;
|
|
|
|
const int pin_np = 38;
|
|
const int pin_dac = 25;
|
|
const int pin_adc = 1;
|
|
|
|
const int SD_MISO = 2;
|
|
const int SD_MOSI = 11;
|
|
const int SD_CLK = 14;
|
|
const int SD_CS = 13;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 37;
|
|
const int pin_led_tx = 37;
|
|
#else
|
|
const int pin_led_rx = 37;
|
|
const int pin_led_tx = 37;
|
|
#endif
|
|
#endif
|
|
|
|
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX1262
|
|
{
|
|
false, // DEFAULT_SPI
|
|
true, // HAS_TCXO
|
|
true // DIO2_AS_RF_SWITCH
|
|
},
|
|
};
|
|
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX1262
|
|
{
|
|
7, // pin_ss
|
|
5, // pin_sclk
|
|
6, // pin_mosi
|
|
3, // pin_miso
|
|
34, // pin_busy
|
|
33, // pin_dio
|
|
8, // pin_reset
|
|
-1, // pin_txen
|
|
-1, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#else
|
|
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
|
|
#endif
|
|
|
|
#elif MCU_VARIANT == MCU_NRF52
|
|
#if BOARD_MODEL == BOARD_RAK4631
|
|
#define HAS_EEPROM false
|
|
#define HAS_DISPLAY true
|
|
#define DISPLAY EINK_BW
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE false
|
|
#define HAS_PMU true
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_0_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
#define EEPROM_SIZE 296
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
#define BLE_MANUFACTURER "RAK Wireless"
|
|
#define BLE_MODEL "RAK4640"
|
|
|
|
#define INTERFACE_COUNT 1
|
|
|
|
// first interface in list is the primary
|
|
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X};
|
|
const bool interface_cfg[INTERFACE_COUNT][3] = {
|
|
// SX1262
|
|
{
|
|
false, // DEFAULT_SPI
|
|
true, // HAS_TCXO
|
|
true // DIO2_AS_RF_SWITCH
|
|
}
|
|
};
|
|
const int8_t interface_pins[INTERFACE_COUNT][10] = {
|
|
// SX1262
|
|
{
|
|
42, // pin_ss
|
|
43, // pin_sclk
|
|
44, // pin_mosi
|
|
45, // pin_miso
|
|
46, // pin_busy
|
|
47, // pin_dio
|
|
38, // pin_reset
|
|
-1, // pin_txen
|
|
37, // pin_rxen
|
|
-1 // pin_tcxo_enable
|
|
}
|
|
};
|
|
|
|
#define INTERFACE_SPI
|
|
// Required because on RAK4631, non-default SPI pins must be initialised when class is declared.
|
|
const SPIClass interface_spi[1] = {
|
|
// SX1262
|
|
SPIClass(
|
|
NRF_SPIM2,
|
|
interface_pins[0][3],
|
|
interface_pins[0][1],
|
|
interface_pins[0][2]
|
|
)
|
|
};
|
|
|
|
const int pin_disp_cs = SS;
|
|
const int pin_disp_dc = WB_IO1;
|
|
const int pin_disp_reset = -1;
|
|
const int pin_disp_busy = WB_IO4;
|
|
const int pin_disp_en = WB_IO2;
|
|
|
|
const int pin_led_rx = LED_BLUE;
|
|
const int pin_led_tx = LED_GREEN;
|
|
|
|
#else
|
|
#error An unsupported nRF board was selected. Cannot compile RNode firmware.
|
|
#endif
|
|
|
|
#endif
|
|
#ifndef INTERFACE_SPI
|
|
// Even if custom SPI interfaces are not needed, the array must exist to prevent compilation errors.
|
|
#define INTERFACE_SPI
|
|
const SPIClass interface_spi[1];
|
|
#endif
|
|
#endif
|