416 lines
30 KiB
Makefile
416 lines
30 KiB
Makefile
# Copyright (C) 2023, Mark Qvist
|
|
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
ESP_IDF_VER = 2.0.17
|
|
|
|
V ?= 0
|
|
VFLAG =
|
|
ifeq "$(V)" "1"
|
|
VFLAG =-v
|
|
endif
|
|
|
|
COMMON_BUILD_FLAGS = $(VFLAG) -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152"
|
|
COMMON_ESP_UPLOAD_FlAGS = $(VFLAG) --chip esp32 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000
|
|
|
|
all: release
|
|
|
|
clean:
|
|
-rm -rf ./build
|
|
-rm -f ./Release/rnode_firmware*
|
|
|
|
prep: prep-esp32 prep-nrf
|
|
|
|
prep-index:
|
|
arduino-cli core update-index --config-file arduino-cli.yaml
|
|
|
|
prep-esp32:
|
|
arduino-cli core install esp32:esp32@$(ESP_IDF_VER) --config-file arduino-cli.yaml
|
|
arduino-cli lib install "Adafruit SSD1306"
|
|
arduino-cli lib install "XPowersLib"
|
|
arduino-cli lib install "Crypto"
|
|
arduino-cli lib install "Adafruit NeoPixel"
|
|
pip install pyserial rns --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
|
|
|
prep-nrf:
|
|
arduino-cli core install adafruit:nrf52 --config-file arduino-cli.yaml
|
|
arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
|
|
arduino-cli lib install "Crypto"
|
|
arduino-cli lib install "Adafruit GFX Library"
|
|
arduino-cli lib install "GxEPD2"
|
|
pip install pyserial rns --upgrade --user --break-system-packages
|
|
pip install adafruit-nrfutil --upgrade --user --break-system-packages # This looks scary, but it's actually just telling pip to install packages as a user instead of trying to install them systemwide, which bypasses the "externally managed environment" error.
|
|
|
|
console-site:
|
|
make -C Console clean site
|
|
|
|
spiffs: console-site spiffs-image
|
|
|
|
spiffs-image:
|
|
python3 Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin
|
|
|
|
upload-spiffs:
|
|
@echo Deploying SPIFFS image...
|
|
python ./Release/esptool/esptool.py $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin
|
|
|
|
firmware: $(shell grep ^firmware- Makefile | cut -d: -f1)
|
|
|
|
firmware-tbeam:
|
|
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
|
|
|
firmware-tbeam_sx126x:
|
|
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
|
|
|
firmware-techo: firmware-techo4 firmware-techo9
|
|
|
|
firmware-techo4:
|
|
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x16\""
|
|
|
|
firmware-techo9:
|
|
arduino-cli compile --fqbn adafruit:nrf52:pca10056 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x43\" \"-DBOARD_VARIANT=0x17\""
|
|
|
|
firmware-t3s3_sx1262:
|
|
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\""
|
|
|
|
firmware-t3s3_sx1280_pa:
|
|
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\""
|
|
|
|
firmware-e22_esp32:
|
|
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\" \"-DEXTERNAL_LEDS=true\""
|
|
|
|
firmware-lora32_v10:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
|
|
|
firmware-lora32_v10_extled:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
|
|
|
firmware-lora32_v20:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
|
|
|
firmware-lora32_v21:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
|
|
|
firmware-lora32_v21_extled:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
|
|
|
firmware-lora32_v21_tcxo:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
|
|
|
firmware-heltec32_v2:
|
|
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
|
|
|
firmware-heltec32_v2_extled:
|
|
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
|
|
|
firmware-heltec32_v3:
|
|
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
|
|
|
firmware-rnode_ng_20:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
|
|
|
firmware-rnode_ng_21:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
|
|
|
firmware-featheresp32:
|
|
arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
|
|
|
firmware-genericesp32:
|
|
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
|
|
|
firmware-rak4631:
|
|
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
|
|
|
firmware-rak4631_sx1280:
|
|
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
|
|
|
firmware-freenode:
|
|
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\""
|
|
|
|
upload-tbeam:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:t-beam
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FLAGS)
|
|
|
|
upload-techo:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn adafruit:nrf52:pca10056
|
|
unzip -o build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.zip -d build/adafruit.nrf52.pca10056
|
|
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/adafruit.nrf52.pca10056/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
|
|
|
upload-lora32_v10:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
upload-lora32_v20:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
upload-lora32_v21:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
upload-heltec32_v2:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V2
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
upload-heltec32_v3:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:heltec_wifi_lora_32_V3
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
upload-rnode_ng_20:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:ttgo-lora32
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
upload-rnode_ng_21:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:ttgo-lora32
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
upload-t3s3:
|
|
@echo
|
|
@echo Put board into flashing mode by holding BOOT button while momentarily pressing the RESET button. Hit enter when done.
|
|
@read
|
|
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3
|
|
@sleep 2
|
|
python3 ./Release/esptool/esptool.py --chip esp32s3 --port $(or $(port), /dev/ttyACM0) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
|
@echo
|
|
@echo Press the RESET button on the board now, and hit enter
|
|
@read
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin)
|
|
|
|
upload-featheresp32:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:featheresp32
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_UPLOAD_FLAGS) ./Release/console_image.bin
|
|
|
|
upload-rak4631:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn rakwireless:nrf52:WisCoreRAK4631Board
|
|
unzip -o build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.zip -d build/rakwireless.nrf52.WisCoreRAK4631Board
|
|
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(sha256sum ./build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.bin | grep -o '^\S*')
|
|
|
|
upload-e22_esp32:
|
|
arduino-cli upload -p $(or $(port), /dev/ttyUSB0) --fqbn esp32:esp32:esp32
|
|
@sleep 1
|
|
rnodeconf $(or $(port), /dev/ttyUSB0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin)
|
|
@sleep 3
|
|
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyUSB0) $(COMMON_ESP_UPLOAD_FlAGS)
|
|
|
|
release: release-all
|
|
|
|
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-e22_esp32 release-hashes
|
|
|
|
release-hashes:
|
|
python3 ./release_hashes.py > ./Release/release.json
|
|
|
|
release-tbeam:
|
|
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam.boot_app0
|
|
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin build/rnode_firmware_tbeam.bin
|
|
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_tbeam.bootloader
|
|
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_tbeam.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_tbeam.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam.boot_app0 build/rnode_firmware_tbeam.bin build/rnode_firmware_tbeam.bootloader build/rnode_firmware_tbeam.partitions
|
|
rm -r build
|
|
|
|
release-tbeam_sx1262:
|
|
arduino-cli compile --fqbn esp32:esp32:t-beam $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_sx1262.boot_app0
|
|
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bin build/rnode_firmware_tbeam_sx1262.bin
|
|
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_tbeam_sx1262.bootloader
|
|
cp build/esp32.esp32.t-beam/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_tbeam_sx1262.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_tbeam_sx1262.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_sx1262.boot_app0 build/rnode_firmware_tbeam_sx1262.bin build/rnode_firmware_tbeam_sx1262.bootloader build/rnode_firmware_tbeam_sx1262.partitions
|
|
rm -r build
|
|
|
|
release-lora32_v10:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v10.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v10.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
|
|
rm -r build
|
|
|
|
release-lora32_v20:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v20.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v20.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_lora32v20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
|
|
rm -r build
|
|
|
|
release-lora32_v21:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v21.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_lora32v21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
|
|
rm -r build
|
|
|
|
release-lora32_v10_extled:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v10.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v10.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
|
|
rm -r build
|
|
|
|
release-lora32_v20_extled:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v20.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v20.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_lora32v20_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
|
|
rm -r build
|
|
|
|
release-lora32_v21_extled:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v21.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_lora32v21_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
|
|
rm -r build
|
|
|
|
release-lora32_v21_tcxo:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21_tcxo.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21_tcxo.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21_tcxo.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v21_tcxo.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_lora32v21_tcxo.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21_tcxo.boot_app0 build/rnode_firmware_lora32v21_tcxo.bin build/rnode_firmware_lora32v21_tcxo.bootloader build/rnode_firmware_lora32v21_tcxo.partitions
|
|
rm -r build
|
|
|
|
release-heltec32_v2:
|
|
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v2.bin
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
|
|
rm -r build
|
|
|
|
release-heltec32_v3:
|
|
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v3.boot_app0
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v3.bin
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v3.bootloader
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_heltec32v3.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_heltec32v3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v3.boot_app0 build/rnode_firmware_heltec32v3.bin build/rnode_firmware_heltec32v3.bootloader build/rnode_firmware_heltec32v3.partitions
|
|
rm -r build
|
|
|
|
release-heltec32_v2_extled:
|
|
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bin build/rnode_firmware_heltec32v2.bin
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
|
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
|
|
rm -r build
|
|
|
|
release-rnode_ng_20:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_ng20.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_ng20.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_ng20.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_ng20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng20.boot_app0 build/rnode_firmware_ng20.bin build/rnode_firmware_ng20.bootloader build/rnode_firmware_ng20.partitions
|
|
rm -r build
|
|
|
|
release-rnode_ng_21:
|
|
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_ng21.bin
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_ng21.bootloader
|
|
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_ng21.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_ng21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng21.boot_app0 build/rnode_firmware_ng21.bin build/rnode_firmware_ng21.bootloader build/rnode_firmware_ng21.partitions
|
|
rm -r build
|
|
|
|
release-t3s3:
|
|
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3.boot_app0
|
|
cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin build/rnode_firmware_t3s3.bin
|
|
cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_t3s3.bootloader
|
|
cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_t3s3.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
|
|
rm -r build
|
|
|
|
release-e22_esp32:
|
|
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_e22.boot_app0
|
|
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_e22.bin
|
|
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_e22.bootloader
|
|
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_esp32_e22.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_esp32_e22.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_e22.boot_app0 build/rnode_firmware_esp32_e22.bin build/rnode_firmware_esp32_e22.bootloader build/rnode_firmware_esp32_e22.partitions
|
|
rm -r build
|
|
|
|
release-featheresp32:
|
|
arduino-cli compile --fqbn esp32:esp32:featheresp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
|
|
cp build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_featheresp32.bin
|
|
cp build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_featheresp32.bootloader
|
|
cp build/esp32.esp32.featheresp32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_featheresp32.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_featheresp32.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_featheresp32.boot_app0 build/rnode_firmware_featheresp32.bin build/rnode_firmware_featheresp32.bootloader build/rnode_firmware_featheresp32.partitions
|
|
rm -r build
|
|
|
|
release-genericesp32:
|
|
arduino-cli compile --fqbn esp32:esp32:esp32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
|
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ESP_IDF_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_generic.boot_app0
|
|
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bin build/rnode_firmware_esp32_generic.bin
|
|
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_esp32_generic.bootloader
|
|
cp build/esp32.esp32.esp32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_esp32_generic.partitions
|
|
zip --junk-paths ./Release/rnode_firmware_esp32_generic.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_generic.boot_app0 build/rnode_firmware_esp32_generic.bin build/rnode_firmware_esp32_generic.bootloader build/rnode_firmware_esp32_generic.partitions
|
|
rm -r build
|
|
|
|
release-rak4631:
|
|
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
|
|
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631.hex
|
|
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631.hex Release/rnode_firmware_rak4631.zip
|
|
|
|
release-rak4631_sx1280:
|
|
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x14\""
|
|
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631_sx1280.hex
|
|
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631_sx1280.hex Release/rnode_firmware_rak4631_sx1280.zip
|
|
|
|
release-freenode:
|
|
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\""
|
|
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_freenode.hex
|
|
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_freenode.hex Release/rnode_firmware_freenode.zip
|