jacob.eva/opencom_xl_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
36c90de9f8
opencom_xl_firmware/RNode_Firmware_CE.ino

1395 lines
42 KiB
C++
Raw Blame History

// Copyright (C) 2023, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#include <Arduino.h>
#include <SPI.h>
#include "Utilities.h"
#if MCU_VARIANT == MCU_NRF52
#define INTERFACE_SPI
// Required because on RAK4631, non-default SPI pins must be initialised when class is declared.
SPIClass interface_spi[1] = {
// SX1262
SPIClass(
NRF_SPIM2,
interface_pins[0][3],
interface_pins[0][1],
interface_pins[0][2]
)
};
#endif
#ifndef INTERFACE_SPI
// INTERFACE_SPI is only required on NRF52 platforms, as the SPI pins are set in the class constructor and not by a setter method.
// Even if custom SPI interfaces are not needed, the array must exist to prevent compilation errors.
#define INTERFACE_SPI
SPIClass interface_spi[1];
#endif
FIFOBuffer serialFIFO;
uint8_t serialBuffer[CONFIG_UART_BUFFER_SIZE+1];
uint16_t packet_starts_buf[(CONFIG_QUEUE_MAX_LENGTH)+1];
uint16_t packet_lengths_buf[(CONFIG_QUEUE_MAX_LENGTH)+1];
FIFOBuffer16 packet_starts[INTERFACE_COUNT];
FIFOBuffer16 packet_lengths[INTERFACE_COUNT];
volatile uint8_t queue_height[INTERFACE_COUNT] = {0};
volatile uint16_t queued_bytes[INTERFACE_COUNT] = {0};
volatile uint16_t queue_cursor[INTERFACE_COUNT] = {0};
volatile uint16_t current_packet_start[INTERFACE_COUNT] = {0};
volatile bool serial_buffering = false;
#if HAS_BLUETOOTH || HAS_BLE == true
bool bt_init_ran = false;
#endif
#if HAS_CONSOLE
#include "Console.h"
#endif
char sbuf[128];
bool packet_ready = false;
volatile bool process_packet = false;
volatile uint8_t packet_interface = 0;
uint8_t *packet_queue[INTERFACE_COUNT];
void setup() {
#if MCU_VARIANT == MCU_ESP32
boot_seq();
EEPROM.begin(EEPROM_SIZE);
Serial.setRxBufferSize(CONFIG_UART_BUFFER_SIZE);
#endif
#if MCU_VARIANT == MCU_NRF52
if (!eeprom_begin()) {
Serial.write("EEPROM initialisation failed.\r\n");
}
#endif
// Seed the PRNG for CSMA R-value selection
# if MCU_VARIANT == MCU_ESP32
// On ESP32, get the seed value from the
// hardware RNG
int seed_val = (int)esp_random();
#else
// Otherwise, get a pseudo-random seed
// value from an unconnected analog pin
int seed_val = analogRead(0);
#endif
randomSeed(seed_val);
// Initialise serial communication
memset(serialBuffer, 0, sizeof(serialBuffer));
fifo_init(&serialFIFO, serialBuffer, CONFIG_UART_BUFFER_SIZE);
Serial.begin(serial_baudrate);
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_T3S3
// Some boards need to wait until the hardware UART is set up before booting
// the full firmware. In the case of the RAK4631, the line below will wait
// until a serial connection is actually established with a master. Thus, it
// is disabled on this platform.
while (!Serial);
#endif
// Configure input and output pins
#if HAS_INPUT
input_init();
#endif
#if HAS_NP == false
pinMode(pin_led_rx, OUTPUT);
pinMode(pin_led_tx, OUTPUT);
#endif
for (int i = 0; i < INTERFACE_COUNT; i++) {
if (interface_pins[i][9] != -1) {
pinMode(interface_pins[i][9], OUTPUT);
digitalWrite(interface_pins[i][9], HIGH);
}
}
// Initialise buffers
memset(pbuf, 0, sizeof(pbuf));
memset(cmdbuf, 0, sizeof(cmdbuf));
memset(packet_starts_buf, 0, sizeof(packet_starts_buf));
memset(packet_lengths_buf, 0, sizeof(packet_starts_buf));
for (int i = 0; i < INTERFACE_COUNT; i++) {
fifo16_init(&packet_starts[i], packet_starts_buf, CONFIG_QUEUE_MAX_LENGTH);
fifo16_init(&packet_lengths[i], packet_lengths_buf, CONFIG_QUEUE_MAX_LENGTH);
packet_queue[i] = (uint8_t*)malloc(getQueueSize(i)+1);
}
// Create and configure interface objects
for (uint8_t i = 0; i < INTERFACE_COUNT; i++) {
switch (interfaces[i]) {
case SX126X:
case SX1262:
{
sx126x* obj;
// if default spi enabled
if (interface_cfg[i][0]) {
obj = new sx126x(i, &SPI, interface_cfg[i][1],
interface_cfg[i][2], interface_pins[i][0], interface_pins[i][1],
interface_pins[i][2], interface_pins[i][3], interface_pins[i][6],
interface_pins[i][5], interface_pins[i][4], interface_pins[i][8]);
}
else {
obj = new sx126x(i, &interface_spi[i], interface_cfg[i][1],
interface_cfg[i][2], interface_pins[i][0], interface_pins[i][1],
interface_pins[i][2], interface_pins[i][3], interface_pins[i][6],
interface_pins[i][5], interface_pins[i][4], interface_pins[i][8]);
}
interface_obj[i] = obj;
interface_obj_sorted[i] = obj;
break;
}
case SX127X:
case SX1276:
case SX1278:
{
sx127x* obj;
// if default spi enabled
if (interface_cfg[i][0]) {
obj = new sx127x(i, &SPI, interface_pins[i][0],
interface_pins[i][1], interface_pins[i][2], interface_pins[i][3],
interface_pins[i][6], interface_pins[i][5], interface_pins[i][4]);
}
else {
obj = new sx127x(i, &interface_spi[i], interface_pins[i][0],
interface_pins[i][1], interface_pins[i][2], interface_pins[i][3],
interface_pins[i][6], interface_pins[i][5], interface_pins[i][4]);
}
interface_obj[i] = obj;
interface_obj_sorted[i] = obj;
break;
}
case SX128X:
case SX1280:
{
sx128x* obj;
// if default spi enabled
if (interface_cfg[i][0]) {
obj = new sx128x(i, &SPI, interface_cfg[i][1],
interface_pins[i][0], interface_pins[i][1], interface_pins[i][2],
interface_pins[i][3], interface_pins[i][6], interface_pins[i][5],
interface_pins[i][4], interface_pins[i][8], interface_pins[i][7]);
}
else {
obj = new sx128x(i, &interface_spi[i], interface_cfg[i][1],
interface_pins[i][0], interface_pins[i][1], interface_pins[i][2],
interface_pins[i][3], interface_pins[i][6], interface_pins[i][5],
interface_pins[i][4], interface_pins[i][8], interface_pins[i][7]);
}
interface_obj[i] = obj;
interface_obj_sorted[i] = obj;
break;
}
default:
break;
}
}
// Check installed transceiver chip(s) and probe boot parameters. If any of
// the configured modems cannot be initialised, do not boot
for (int i = 0; i < INTERFACE_COUNT; i++) {
switch (interfaces[i]) {
case SX126X:
case SX1262:
case SX127X:
case SX1276:
case SX1278:
case SX128X:
case SX1280:
selected_radio = interface_obj[i];
break;
default:
modems_installed = false;
break;
}
if (selected_radio->preInit()) {
modems_installed = true;
uint32_t lfr = selected_radio->getFrequency();
if (lfr == 0) {
// Normal boot
} else if (lfr == M_FRQ_R) {
// Quick reboot
#if HAS_CONSOLE
if (rtc_get_reset_reason(0) == POWERON_RESET) {
console_active = true;
}
#endif
} else {
// Unknown boot
}
selected_radio->setFrequency(M_FRQ_S);
} else {
modems_installed = false;
}
if (!modems_installed) {
break;
}
}
#if HAS_DISPLAY
#if HAS_EEPROM
if (EEPROM.read(eeprom_addr(ADDR_CONF_DSET)) != CONF_OK_BYTE) {
#elif MCU_VARIANT == MCU_NRF52
if (eeprom_read(eeprom_addr(ADDR_CONF_DSET)) != CONF_OK_BYTE) {
#endif
eeprom_update(eeprom_addr(ADDR_CONF_DSET), CONF_OK_BYTE);
eeprom_update(eeprom_addr(ADDR_CONF_DINT), 0xFF);
}
#if DISPLAY == EINK_BW || DISPLAY == EINK_3C
// Poll and process incoming serial commands whilst e-ink display is
// refreshing to make device still seem responsive
display_add_callback(process_serial);
#endif
disp_ready = display_init();
update_display();
#endif
#if HAS_PMU == true
pmu_ready = init_pmu();
#endif
#if HAS_BLUETOOTH || HAS_BLE == true
bt_init();
bt_init_ran = true;
#endif
if (console_active) {
#if HAS_CONSOLE
console_start();
#else
kiss_indicate_reset();
#endif
} else {
kiss_indicate_reset();
}
// Validate board health, EEPROM and config
validate_status();
}
void lora_receive(RadioInterface* radio) {
if (!implicit) {
radio->receive();
} else {
radio->receive(implicit_l);
}
}
inline void kiss_write_packet(int index) {
// We need to convert the interface index to the command byte representation
uint8_t cmd_byte = getInterfaceCommandByte(index);
serial_write(FEND);
// Add index of interface the packet came from
serial_write(cmd_byte);
for (uint16_t i = 0; i < read_len; i++) {
uint8_t byte = pbuf[i];
if (byte == FEND) { serial_write(FESC); byte = TFEND; }
if (byte == FESC) { serial_write(FESC); byte = TFESC; }
serial_write(byte);
}
serial_write(FEND);
read_len = 0;
packet_ready = false;
}
inline void getPacketData(RadioInterface* radio, uint16_t len) {
while (len-- && read_len < MTU) {
pbuf[read_len++] = radio->read();
}
}
void ISR_VECT receive_callback(uint8_t index, int packet_size) {
if (!promisc) {
selected_radio = interface_obj[index];
// The standard operating mode allows large
// packets with a payload up to 500 bytes,
// by combining two raw LoRa packets.
// We read the 1-byte header and extract
// packet sequence number and split flags
uint8_t header = selected_radio->read(); packet_size--;
uint8_t sequence = packetSequence(header);
bool ready = false;
if (isSplitPacket(header) && seq == SEQ_UNSET) {
// This is the first part of a split
// packet, so we set the seq variable
// and add the data to the buffer
read_len = 0;
seq = sequence;
getPacketData(selected_radio, packet_size);
} else if (isSplitPacket(header) && seq == sequence) {
// This is the second part of a split
// packet, so we add it to the buffer
// and set the ready flag.
getPacketData(selected_radio, packet_size);
seq = SEQ_UNSET;
ready = true;
} else if (isSplitPacket(header) && seq != sequence) {
// This split packet does not carry the
// same sequence id, so we must assume
// that we are seeing the first part of
// a new split packet.
read_len = 0;
seq = sequence;
getPacketData(selected_radio, packet_size);
} else if (!isSplitPacket(header)) {
// This is not a split packet, so we
// just read it and set the ready
// flag to true.
if (seq != SEQ_UNSET) {
// If we already had part of a split
// packet in the buffer, we clear it.
read_len = 0;
seq = SEQ_UNSET;
}
getPacketData(selected_radio, packet_size);
ready = true;
}
if (ready) {
packet_ready = true;
}
} else {
// In promiscuous mode, raw packets are
// output directly to the host
read_len = 0;
getPacketData(selected_radio, packet_size);
packet_ready = true;
}
last_rx = millis();
}
bool startRadio(RadioInterface* radio) {
update_radio_lock(radio);
if (modems_installed && !console_active) {
if (!radio->getRadioLock() && hw_ready) {
if (!radio->begin()) {
// The radio could not be started.
// Indicate this failure over both the
// serial port and with the onboard LEDs
kiss_indicate_error(ERROR_INITRADIO);
led_indicate_error(0);
return false;
} else {
radio->enableCrc();
radio->onReceive(receive_callback);
radio->updateBitrate();
sort_interfaces();
kiss_indicate_phy_stats(radio);
lora_receive(radio);
// Flash an info pattern to indicate
// that the radio is now on
kiss_indicate_radiostate(radio);
led_indicate_info(3);
return true;
}
} else {
// Flash a warning pattern to indicate
// that the radio was locked, and thus
// not started
kiss_indicate_radiostate(radio);
led_indicate_warning(3);
return false;
}
} else {
// If radio is already on, we silently
// ignore the request.
kiss_indicate_radiostate(radio);
return true;
}
}
void stopRadio(RadioInterface* radio) {
radio->end();
sort_interfaces();
}
void update_radio_lock(RadioInterface* radio) {
if (radio->getFrequency() != 0 && radio->getSignalBandwidth() != 0 && radio->getTxPower() != 0xFF && radio->getSpreadingFactor() != 0) {
radio->setRadioLock(false);
} else {
radio->setRadioLock(true);
}
}
// Check if the queue is full for the selected radio.
// Returns true if full, false if not
bool queueFull(RadioInterface* radio) {
return (queue_height[radio->getIndex()] >= (CONFIG_QUEUE_MAX_LENGTH) || queued_bytes[radio->getIndex()] >= (getQueueSize(radio->getIndex())));
}
volatile bool queue_flushing = false;
// Flushes all packets for the interface
void flushQueue(RadioInterface* radio) {
uint8_t index = radio->getIndex();
if (!queue_flushing) {
queue_flushing = true;
led_tx_on();
uint16_t processed = 0;
uint8_t data_byte;
while (!fifo16_isempty(&packet_starts[index])) {
uint16_t start = fifo16_pop(&packet_starts[index]);
uint16_t length = fifo16_pop(&packet_lengths[index]);
if (length >= MIN_L && length <= MTU) {
for (uint16_t i = 0; i < length; i++) {
uint16_t pos = (start+i)%(getQueueSize(index));
tbuf[i] = packet_queue[index][pos];
}
transmit(radio, length);
processed++;
}
}
lora_receive(radio);
led_tx_off();
radio->setPostTxYieldTimeout(millis()+(lora_post_tx_yield_slots*selected_radio->getCSMASlotMS()));
}
queue_height[index] = 0;
queued_bytes[index] = 0;
selected_radio->updateAirtime();
queue_flushing = false;
}
void transmit(RadioInterface* radio, uint16_t size) {
if (radio->getRadioOnline()) {
if (!promisc) {
uint16_t written = 0;
uint8_t header = random(256) & 0xF0;
if (size > SINGLE_MTU - HEADER_L) {
header = header | FLAG_SPLIT;
}
radio->beginPacket();
radio->write(header); written++;
for (uint16_t i=0; i < size; i++) {
radio->write(tbuf[i]);
written++;
if (written == 255) {
radio->endPacket(); radio->addAirtime(written);
radio->beginPacket();
radio->write(header);
written = 1;
}
}
radio->endPacket(); radio->addAirtime(written);
} else {
// In promiscuous mode, we only send out
// plain raw LoRa packets with a maximum
// payload of 255 bytes
led_tx_on();
uint16_t written = 0;
// Cap packets at 255 bytes
if (size > SINGLE_MTU) {
size = SINGLE_MTU;
}
// If implicit header mode has been set,
// set packet length to payload data length
if (!implicit) {
radio->beginPacket();
} else {
radio->beginPacket(size);
}
for (uint16_t i=0; i < size; i++) {
radio->write(tbuf[i]);
written++;
}
radio->endPacket(); radio->addAirtime(written);
}
last_tx = millis();
} else {
kiss_indicate_error(ERROR_TXFAILED);
led_indicate_error(5);
}
}
void serialCallback(uint8_t sbyte) {
if (IN_FRAME && sbyte == FEND &&
(command == CMD_INT0_DATA
|| command == CMD_INT1_DATA
|| command == CMD_INT2_DATA
|| command == CMD_INT3_DATA
|| command == CMD_INT4_DATA
|| command == CMD_INT5_DATA
|| command == CMD_INT6_DATA
|| command == CMD_INT7_DATA
|| command == CMD_INT8_DATA
|| command == CMD_INT9_DATA
|| command == CMD_INT10_DATA
|| command == CMD_INT11_DATA)) {
IN_FRAME = false;
if (getInterfaceIndex(command) < INTERFACE_COUNT) {
uint8_t index = getInterfaceIndex(command);
if (!fifo16_isfull(&packet_starts[index]) && (queued_bytes[index] < (getQueueSize(index)))) {
uint16_t s = current_packet_start[index];
uint16_t e = queue_cursor[index]-1; if (e == -1) e = (getQueueSize(index))-1;
uint16_t l;
if (s != e) {
l = (s < e) ? e - s + 1: (getQueueSize(index)) - s + e + 1;
} else {
l = 1;
}
if (l >= MIN_L) {
queue_height[index]++;
fifo16_push(&packet_starts[index], s);
fifo16_push(&packet_lengths[index], l);
current_packet_start[index] = queue_cursor[index];
}
}
}
} else if (sbyte == FEND) {
IN_FRAME = true;
command = CMD_UNKNOWN;
frame_len = 0;
} else if (IN_FRAME && frame_len < MTU) {
// Have a look at the command byte first
if (frame_len == 0 && command == CMD_UNKNOWN) {
command = sbyte;
if (command == CMD_SEL_INT0
|| command == CMD_SEL_INT1
|| command == CMD_SEL_INT2
|| command == CMD_SEL_INT3
|| command == CMD_SEL_INT4
|| command == CMD_SEL_INT5
|| command == CMD_SEL_INT6
|| command == CMD_SEL_INT7
|| command == CMD_SEL_INT8
|| command == CMD_SEL_INT9
|| command == CMD_SEL_INT10
|| command == CMD_SEL_INT11) {
interface = getInterfaceIndex(command);
}
} else if (command == CMD_INT0_DATA
|| command == CMD_INT1_DATA
|| command == CMD_INT2_DATA
|| command == CMD_INT3_DATA
|| command == CMD_INT4_DATA
|| command == CMD_INT5_DATA
|| command == CMD_INT6_DATA
|| command == CMD_INT7_DATA
|| command == CMD_INT8_DATA
|| command == CMD_INT9_DATA
|| command == CMD_INT10_DATA
|| command == CMD_INT11_DATA) {
if (bt_state != BT_STATE_CONNECTED) cable_state = CABLE_STATE_CONNECTED;
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (getInterfaceIndex(command) < INTERFACE_COUNT) {
uint8_t index = getInterfaceIndex(command);
if (queue_height[index] < CONFIG_QUEUE_MAX_LENGTH && queued_bytes[index] < (getQueueSize(index))) {
queued_bytes[index]++;
packet_queue[index][queue_cursor[index]++] = sbyte;
if (queue_cursor[index] == (getQueueSize(index))) queue_cursor[index] = 0;
}
}
}
} else if (command == CMD_INTERFACES) {
for (int i = 0; i < INTERFACE_COUNT; i++) {
kiss_indicate_interface(i);
}
} else if (command == CMD_FREQUENCY) {
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
if (frame_len == 4) {
uint32_t freq = (uint32_t)cmdbuf[0] << 24 | (uint32_t)cmdbuf[1] << 16 | (uint32_t)cmdbuf[2] << 8 | (uint32_t)cmdbuf[3];
selected_radio = interface_obj[interface];
if (freq == 0) {
kiss_indicate_frequency(selected_radio);
} else {
if (op_mode == MODE_HOST) selected_radio->setFrequency(freq);
kiss_indicate_frequency(selected_radio);
}
interface = 0;
}
} else if (command == CMD_BANDWIDTH) {
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
if (frame_len == 4) {
uint32_t bw = (uint32_t)cmdbuf[0] << 24 | (uint32_t)cmdbuf[1] << 16 | (uint32_t)cmdbuf[2] << 8 | (uint32_t)cmdbuf[3];
selected_radio = interface_obj[interface];
if (bw == 0) {
kiss_indicate_bandwidth(selected_radio);
} else {
if (op_mode == MODE_HOST) selected_radio->setSignalBandwidth(bw);
selected_radio->updateBitrate();
sort_interfaces();
kiss_indicate_bandwidth(selected_radio);
kiss_indicate_phy_stats(selected_radio);
}
interface = 0;
}
} else if (command == CMD_TXPOWER) {
selected_radio = interface_obj[interface];
if (sbyte == 0xFF) {
kiss_indicate_txpower(selected_radio);
} else {
int8_t txp = (int8_t)sbyte;
if (op_mode == MODE_HOST) setTXPower(selected_radio, txp);
kiss_indicate_txpower(selected_radio);
}
interface = 0;
} else if (command == CMD_SF) {
selected_radio = interface_obj[interface];
if (sbyte == 0xFF) {
kiss_indicate_spreadingfactor(selected_radio);
} else {
int sf = sbyte;
if (sf < 5) sf = 5;
if (sf > 12) sf = 12;
if (op_mode == MODE_HOST) selected_radio->setSpreadingFactor(sf);
selected_radio->updateBitrate();
sort_interfaces();
kiss_indicate_spreadingfactor(selected_radio);
kiss_indicate_phy_stats(selected_radio);
}
interface = 0;
} else if (command == CMD_CR) {
selected_radio = interface_obj[interface];
if (sbyte == 0xFF) {
kiss_indicate_codingrate(selected_radio);
} else {
int cr = sbyte;
if (cr < 5) cr = 5;
if (cr > 8) cr = 8;
if (op_mode == MODE_HOST) selected_radio->setCodingRate4(cr);
selected_radio->updateBitrate();
sort_interfaces();
kiss_indicate_codingrate(selected_radio);
kiss_indicate_phy_stats(selected_radio);
}
interface = 0;
} else if (command == CMD_IMPLICIT) {
set_implicit_length(sbyte);
kiss_indicate_implicit_length();
} else if (command == CMD_LEAVE) {
if (sbyte == 0xFF) {
cable_state = CABLE_STATE_DISCONNECTED;
//current_rssi = -292;
last_rssi = -292;
last_rssi_raw = 0x00;
last_snr_raw = 0x80;
}
} else if (command == CMD_RADIO_STATE) {
selected_radio = interface_obj[interface];
if (bt_state != BT_STATE_CONNECTED) cable_state = CABLE_STATE_CONNECTED;
if (sbyte == 0xFF) {
kiss_indicate_radiostate(selected_radio);
} else if (sbyte == 0x00) {
stopRadio(selected_radio);
kiss_indicate_radiostate(selected_radio);
} else if (sbyte == 0x01) {
startRadio(selected_radio);
kiss_indicate_radiostate(selected_radio);
}
interface = 0;
} else if (command == CMD_ST_ALOCK) {
selected_radio = interface_obj[interface];
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
if (frame_len == 2) {
uint16_t at = (uint16_t)cmdbuf[0] << 8 | (uint16_t)cmdbuf[1];
if (at == 0) {
selected_radio->setSTALock(0.0);
} else {
int st_airtime_limit = (float)at/(100.0*100.0);
if (st_airtime_limit >= 1.0) { st_airtime_limit = 0.0; }
selected_radio->setSTALock(st_airtime_limit);
}
kiss_indicate_st_alock(selected_radio);
}
interface = 0;
} else if (command == CMD_LT_ALOCK) {
selected_radio = interface_obj[interface];
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
if (frame_len == 2) {
uint16_t at = (uint16_t)cmdbuf[0] << 8 | (uint16_t)cmdbuf[1];
if (at == 0) {
selected_radio->setLTALock(0.0);
} else {
int lt_airtime_limit = (float)at/(100.0*100.0);
if (lt_airtime_limit >= 1.0) { lt_airtime_limit = 0.0; }
selected_radio->setLTALock(lt_airtime_limit);
}
kiss_indicate_lt_alock(selected_radio);
}
interface = 0;
} else if (command == CMD_STAT_RX) {
kiss_indicate_stat_rx();
} else if (command == CMD_STAT_TX) {
kiss_indicate_stat_tx();
} else if (command == CMD_STAT_RSSI) {
kiss_indicate_stat_rssi();
} else if (command == CMD_RADIO_LOCK) {
selected_radio = interface_obj[interface];
update_radio_lock(selected_radio);
kiss_indicate_radio_lock(selected_radio);
interface = 0;
} else if (command == CMD_BLINK) {
led_indicate_info(sbyte);
} else if (command == CMD_RANDOM) {
// pick an interface at random to get data from
int int_index = random(INTERFACE_COUNT);
selected_radio = interface_obj[int_index];
kiss_indicate_random(getRandom(selected_radio));
interface = 0;
} else if (command == CMD_DETECT) {
if (sbyte == DETECT_REQ) {
if (bt_state != BT_STATE_CONNECTED) cable_state = CABLE_STATE_CONNECTED;
kiss_indicate_detect();
}
} else if (command == CMD_PROMISC) {
if (sbyte == 0x01) {
promisc_enable();
} else if (sbyte == 0x00) {
promisc_disable();
}
kiss_indicate_promisc();
} else if (command == CMD_READY) {
selected_radio = interface_obj[interface];
if (!queueFull(selected_radio)) {
kiss_indicate_ready();
} else {
kiss_indicate_not_ready();
}
} else if (command == CMD_UNLOCK_ROM) {
if (sbyte == ROM_UNLOCK_BYTE) {
unlock_rom();
}
} else if (command == CMD_RESET) {
if (sbyte == CMD_RESET_BYTE) {
hard_reset();
}
} else if (command == CMD_ROM_READ) {
kiss_dump_eeprom();
} else if (command == CMD_ROM_WRITE) {
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
if (frame_len == 2) {
eeprom_write(cmdbuf[0], cmdbuf[1]);
}
} else if (command == CMD_FW_VERSION) {
kiss_indicate_version();
} else if (command == CMD_PLATFORM) {
kiss_indicate_platform();
} else if (command == CMD_MCU) {
kiss_indicate_mcu();
} else if (command == CMD_BOARD) {
kiss_indicate_board();
} else if (command == CMD_CONF_SAVE) {
// todo: add extra space in EEPROM so this isn't hardcoded
eeprom_conf_save(interface_obj[0]);
} else if (command == CMD_CONF_DELETE) {
eeprom_conf_delete();
} else if (command == CMD_FB_EXT) {
#if HAS_DISPLAY == true
if (sbyte == 0xFF) {
kiss_indicate_fbstate();
} else if (sbyte == 0x00) {
ext_fb_disable();
kiss_indicate_fbstate();
} else if (sbyte == 0x01) {
ext_fb_enable();
kiss_indicate_fbstate();
}
#endif
} else if (command == CMD_FB_WRITE) {
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
#if HAS_DISPLAY
if (frame_len == 9) {
uint8_t line = cmdbuf[0];
if (line > 63) line = 63;
int fb_o = line*8;
memcpy(fb+fb_o, cmdbuf+1, 8);
}
#endif
} else if (command == CMD_FB_READ) {
if (sbyte != 0x00) {
kiss_indicate_fb();
}
} else if (command == CMD_DEV_HASH) {
if (sbyte != 0x00) {
kiss_indicate_device_hash();
}
} else if (command == CMD_DEV_SIG) {
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
if (frame_len == DEV_SIG_LEN) {
memcpy(dev_sig, cmdbuf, DEV_SIG_LEN);
device_save_signature();
}
} else if (command == CMD_FW_UPD) {
if (sbyte == 0x01) {
firmware_update_mode = true;
} else {
firmware_update_mode = false;
}
} else if (command == CMD_HASHES) {
if (sbyte == 0x01) {
kiss_indicate_target_fw_hash();
} else if (sbyte == 0x02) {
kiss_indicate_fw_hash();
} else if (sbyte == 0x03) {
kiss_indicate_bootloader_hash();
} else if (sbyte == 0x04) {
kiss_indicate_partition_table_hash();
}
} else if (command == CMD_FW_HASH) {
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
if (frame_len < CMD_L) cmdbuf[frame_len++] = sbyte;
}
if (frame_len == DEV_HASH_LEN) {
memcpy(dev_firmware_hash_target, cmdbuf, DEV_HASH_LEN);
device_save_firmware_hash();
}
} else if (command == CMD_BT_CTRL) {
#if HAS_BLUETOOTH || HAS_BLE
if (sbyte == 0x00) {
bt_stop();
bt_conf_save(false);
} else if (sbyte == 0x01) {
bt_start();
bt_conf_save(true);
} else if (sbyte == 0x02) {
bt_enable_pairing();
}
#endif
} else if (command == CMD_DISP_INT) {
#if HAS_DISPLAY
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
display_intensity = sbyte;
di_conf_save(display_intensity);
}
#endif
} else if (command == CMD_DISP_ADDR) {
#if HAS_DISPLAY
if (sbyte == FESC) {
ESCAPE = true;
} else {
if (ESCAPE) {
if (sbyte == TFEND) sbyte = FEND;
if (sbyte == TFESC) sbyte = FESC;
ESCAPE = false;
}
display_addr = sbyte;
da_conf_save(display_addr);
}
#endif
}
}
}
#if MCU_VARIANT == MCU_ESP32
portMUX_TYPE update_lock = portMUX_INITIALIZER_UNLOCKED;
#endif
void validate_status() {
#if MCU_VARIANT == MCU_ESP32
// TODO: Get ESP32 boot flags
uint8_t boot_flags = 0x02;
uint8_t F_POR = 0x00;
uint8_t F_BOR = 0x00;
uint8_t F_WDR = 0x01;
#elif MCU_VARIANT == MCU_NRF52
// TODO: Get NRF52 boot flags
uint8_t boot_flags = 0x02;
uint8_t F_POR = 0x00;
uint8_t F_BOR = 0x00;
uint8_t F_WDR = 0x01;
#endif
if (hw_ready || device_init_done) {
hw_ready = false;
Serial.write("Error, invalid hardware check state\r\n");
#if HAS_DISPLAY
if (disp_ready) {
device_init_done = true;
update_display();
}
#endif
led_indicate_boot_error();
}
if (boot_flags & (1<<F_POR)) {
boot_vector = START_FROM_POWERON;
} else if (boot_flags & (1<<F_BOR)) {
boot_vector = START_FROM_BROWNOUT;
} else if (boot_flags & (1<<F_WDR)) {
boot_vector = START_FROM_BOOTLOADER;
} else {
Serial.write("Error, indeterminate boot vector\r\n");
#if HAS_DISPLAY
if (disp_ready) {
device_init_done = true;
update_display();
}
#endif
led_indicate_boot_error();
}
if (boot_vector == START_FROM_BOOTLOADER || boot_vector == START_FROM_POWERON) {
if (eeprom_lock_set()) {
if (eeprom_product_valid() && eeprom_model_valid() && eeprom_hwrev_valid()) {
if (eeprom_checksum_valid()) {
eeprom_ok = true;
if (modems_installed) {
if (device_init()) {
hw_ready = true;
} else {
hw_ready = false;
}
} else {
hw_ready = false;
Serial.write("No valid radio module found\r\n");
#if HAS_DISPLAY
if (disp_ready) {
device_init_done = true;
update_display();
}
#endif
}
} else {
hw_ready = false;
#if HAS_DISPLAY
if (disp_ready) {
device_init_done = true;
update_display();
}
#endif
}
} else {
hw_ready = false;
#if HAS_DISPLAY
if (disp_ready) {
device_init_done = true;
update_display();
}
#endif
}
} else {
hw_ready = false;
#if HAS_DISPLAY
if (disp_ready) {
device_init_done = true;
update_display();
}
#endif
}
} else {
hw_ready = false;
Serial.write("Error, incorrect boot vector\r\n");
#if HAS_DISPLAY
if (disp_ready) {
device_init_done = true;
update_display();
}
#endif
led_indicate_boot_error();
}
}
void loop() {
packet_poll();
bool ready = false;
for (int i = 0; i < INTERFACE_COUNT; i++) {
selected_radio = interface_obj[i];
if (selected_radio->getRadioOnline()) {
selected_radio->checkModemStatus();
ready = true;
}
}
// If at least one radio is online then we can continue
if (ready) {
if (packet_ready) {
selected_radio = interface_obj[packet_interface];
#if MCU_VARIANT == MCU_ESP32
portENTER_CRITICAL(&update_lock);
#elif MCU_VARIANT == MCU_NRF52
portENTER_CRITICAL();
#endif
last_rssi = selected_radio->packetRssi();
last_snr_raw = selected_radio->packetSnrRaw();
#if MCU_VARIANT == MCU_ESP32
portEXIT_CRITICAL(&update_lock);
#elif MCU_VARIANT == MCU_NRF52
portEXIT_CRITICAL();
#endif
kiss_indicate_stat_rssi();
kiss_indicate_stat_snr();
kiss_write_packet(packet_interface);
}
for (int i = 0; i < INTERFACE_COUNT; i++) {
selected_radio = interface_obj_sorted[i];
if (selected_radio->calculateALock() || !selected_radio->getRadioOnline()) {
// skip this interface
continue;
}
// If a higher data rate interface has received a packet after its
// loop, it still needs to be the first to transmit, so check if this
// is the case.
for (int j = 0; j < INTERFACE_COUNT; j++) {
if (!interface_obj_sorted[j]->calculateALock() || interface_obj_sorted[j]->getRadioOnline()) {
if (interface_obj_sorted[j]->getBitrate() > selected_radio->getBitrate()) {
if (queue_height[interface_obj_sorted[j]->getIndex()] > 0) {
selected_radio = interface_obj_sorted[j];
}
}
}
}
if (queue_height[selected_radio->getIndex()] > 0) {
long check_time = millis();
if (check_time > selected_radio->getPostTxYieldTimeout()) {
if (selected_radio->getDCDWaiting() && (check_time >= selected_radio->getDCDWaitUntil())) { selected_radio->setDCDWaiting(false); }
if (!selected_radio->getDCDWaiting()) {
// todo, will the delay here slow down transmission with
// multiple interfaces? needs investigation
for (uint8_t dcd_i = 0; dcd_i < DCD_THRESHOLD*2; dcd_i++) {
delay(STATUS_INTERVAL_MS); selected_radio->updateModemStatus();
}
if (!selected_radio->getDCD()) {
uint8_t csma_r = (uint8_t)random(256);
if (selected_radio->getCSMAp() >= csma_r) {
flushQueue(selected_radio);
} else {
selected_radio->setDCDWaiting(true);
selected_radio->setDCDWaitUntil(millis()+selected_radio->getCSMASlotMS());
}
}
}
}
}
}
} else {
if (hw_ready) {
if (console_active) {
#if HAS_CONSOLE
console_loop();
#endif
} else {
led_indicate_standby();
}
} else {
led_indicate_not_ready();
// shut down all radio interfaces
for (int i = 0; i < INTERFACE_COUNT; i++) {
stopRadio(interface_obj[i]);
}
}
}
buffer_serial();
if (!fifo_isempty(&serialFIFO)) serial_poll();
#if HAS_DISPLAY
#if DISPLAY == OLED
if (disp_ready) update_display();
#elif DISPLAY == EINK_BW || DISPLAY == EINK_3C
// Display refreshes take so long on e-paper displays that they can disrupt
// the regular operation of the device. To combat this the time it is
// chosen to do so must be strategically chosen. Particularly on the
// RAK4631, the display and the potentially installed SX1280 modem share
// the same SPI bus. Thus it is not possible to solve this by utilising the
// callback functionality to poll the modem in this case. todo, this may be
// able to be improved in the future.
if (disp_ready) {
if (millis() - last_tx >= 4000) {
if (millis() - last_rx >= 1000) {
update_display();
}
}
}
#endif
#endif
#if HAS_PMU
if (pmu_ready) update_pmu();
#endif
#if HAS_BLUETOOTH || HAS_BLE == true
if (!console_active && bt_ready) update_bt();
#endif
#if HAS_INPUT
input_read();
#endif
}
void process_serial() {
buffer_serial();
if (!fifo_isempty(&serialFIFO)) serial_poll();
}
void sleep_now() {
#if HAS_SLEEP == true
#if BOARD_MODEL == BOARD_T3S3
display_intensity = 0;
update_display(true);
#endif
#if PIN_DISP_SLEEP >= 0
pinMode(PIN_DISP_SLEEP, OUTPUT);
digitalWrite(PIN_DISP_SLEEP, DISP_SLEEP_LEVEL);
#endif
esp_sleep_enable_ext0_wakeup(PIN_WAKEUP, WAKEUP_LEVEL);
esp_deep_sleep_start();
#endif
}
void button_event(uint8_t event, unsigned long duration) {
if (duration > 2000) {
sleep_now();
}
}
void poll_buffers() {
process_serial();
}
void packet_poll() {
#if MCU_VARIANT == MCU_ESP32
portENTER_CRITICAL(&update_lock);
#elif MCU_VARIANT == MCU_NRF52
portENTER_CRITICAL();
#endif
// If we have received a packet on an interface which needs to be processed
if (process_packet) {
selected_radio = interface_obj[packet_interface];
selected_radio->clearIRQStatus();
selected_radio->handleDio0Rise();
process_packet = false;
}
#if MCU_VARIANT == MCU_ESP32
portEXIT_CRITICAL(&update_lock);
#elif MCU_VARIANT == MCU_NRF52
portEXIT_CRITICAL();
#endif
}
volatile bool serial_polling = false;
void serial_poll() {
serial_polling = true;
while (!fifo_isempty(&serialFIFO)) {
char sbyte = fifo_pop(&serialFIFO);
serialCallback(sbyte);
}
serial_polling = false;
}
#define MAX_CYCLES 20
void buffer_serial() {
if (!serial_buffering) {
serial_buffering = true;
uint8_t c = 0;
#if HAS_BLUETOOTH || HAS_BLE == true
while (
c < MAX_CYCLES &&
( (bt_state != BT_STATE_CONNECTED && Serial.available()) || (bt_state == BT_STATE_CONNECTED && SerialBT.available()) )
)
#else
while (c < MAX_CYCLES && Serial.available())
#endif
{
c++;
#if HAS_BLUETOOTH || HAS_BLE == true
if (bt_state == BT_STATE_CONNECTED) {
if (!fifo_isfull(&serialFIFO)) {
fifo_push(&serialFIFO, SerialBT.read());
}
} else {
if (!fifo_isfull(&serialFIFO)) {
fifo_push(&serialFIFO, Serial.read());
}
}
#else
if (!fifo_isfull(&serialFIFO)) {
fifo_push(&serialFIFO, Serial.read());
}
#endif
}
serial_buffering = false;
}
}
Reference in New Issue View Git Blame Copy Permalink