f59849ebf4
Fixed issue with RST pin. Incorrect pin currently defined causing issues with board when attempting to use rnsd and getting an error about port in use due to proper reset not happening. Confirmed pins here: https://resource.heltec.cn/download/WiFi_LoRa_32/WIFI_LoRa_32_V2.pdf
433 lines
12 KiB
C
433 lines
12 KiB
C
// Copyright (C) 2024, Mark Qvist
|
|
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
|
|
// You should have received a copy of the GNU General Public License
|
|
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
#include "Modem.h"
|
|
|
|
#ifndef BOARDS_H
|
|
#define BOARDS_H
|
|
|
|
#define PLATFORM_AVR 0x90
|
|
#define PLATFORM_ESP32 0x80
|
|
#define PLATFORM_NRF52 0x70
|
|
|
|
#define MCU_1284P 0x91
|
|
#define MCU_2560 0x92
|
|
#define MCU_ESP32 0x81
|
|
#define MCU_NRF52 0x71
|
|
|
|
#define BOARD_RNODE 0x31
|
|
#define BOARD_HMBRW 0x32
|
|
#define BOARD_TBEAM 0x33
|
|
#define BOARD_HUZZAH32 0x34
|
|
#define BOARD_GENERIC_ESP32 0x35
|
|
#define BOARD_LORA32_V2_0 0x36
|
|
#define BOARD_LORA32_V2_1 0x37
|
|
#define BOARD_LORA32_V1_0 0x39
|
|
#define BOARD_HELTEC32_V2 0x38
|
|
#define BOARD_HELTEC32_V3 0x3A
|
|
#define BOARD_RNODE_NG_20 0x40
|
|
#define BOARD_RNODE_NG_21 0x41
|
|
#define BOARD_RNODE_NG_22 0x42
|
|
#define BOARD_GENERIC_NRF52 0x50
|
|
#define BOARD_RAK4630 0x51
|
|
|
|
#if defined(__AVR_ATmega1284P__)
|
|
#define PLATFORM PLATFORM_AVR
|
|
#define MCU_VARIANT MCU_1284P
|
|
#elif defined(__AVR_ATmega2560__)
|
|
#define PLATFORM PLATFORM_AVR
|
|
#define MCU_VARIANT MCU_2560
|
|
#elif defined(ESP32)
|
|
#define PLATFORM PLATFORM_ESP32
|
|
#define MCU_VARIANT MCU_ESP32
|
|
#elif defined(NRF52840_XXAA)
|
|
#include <variant.h>
|
|
#define PLATFORM PLATFORM_NRF52
|
|
#define MCU_VARIANT MCU_NRF52
|
|
#else
|
|
#error "The firmware cannot be compiled for the selected MCU variant"
|
|
#endif
|
|
|
|
#ifndef MODEM
|
|
#if BOARD_MODEL == BOARD_RAK4630
|
|
#define MODEM SX1262
|
|
#elif BOARD_MODEL == BOARD_GENERIC_NRF52
|
|
#define MODEM SX1262
|
|
#else
|
|
#define MODEM SX1276
|
|
#endif
|
|
#endif
|
|
|
|
#define HAS_DISPLAY false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE false
|
|
#define HAS_TCXO false
|
|
#define HAS_PMU false
|
|
#define HAS_NP false
|
|
#define HAS_EEPROM false
|
|
|
|
#if defined(ENABLE_TCXO)
|
|
#define HAS_TCXO true
|
|
#endif
|
|
|
|
#if MCU_VARIANT == MCU_1284P
|
|
const int pin_cs = 4;
|
|
const int pin_reset = 3;
|
|
const int pin_dio = 2;
|
|
const int pin_led_rx = 12;
|
|
const int pin_led_tx = 13;
|
|
|
|
#define BOARD_MODEL BOARD_RNODE
|
|
#define HAS_EEPROM true
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
#define EEPROM_SIZE 4096
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
|
|
#elif MCU_VARIANT == MCU_2560
|
|
const int pin_cs = 5;
|
|
const int pin_reset = 4;
|
|
const int pin_dio = 2;
|
|
const int pin_led_rx = 12;
|
|
const int pin_led_tx = 13;
|
|
|
|
#define BOARD_MODEL BOARD_HMBRW
|
|
#define HAS_EEPROM true
|
|
#define CONFIG_UART_BUFFER_SIZE 768
|
|
#define CONFIG_QUEUE_SIZE 5120
|
|
#define CONFIG_QUEUE_MAX_LENGTH 24
|
|
#define EEPROM_SIZE 4096
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
|
|
#elif MCU_VARIANT == MCU_ESP32
|
|
|
|
// Board models for ESP32 based builds are
|
|
// defined by the build target in the makefile.
|
|
// If you are not using make to compile this
|
|
// firmware, you can manually define model here.
|
|
//
|
|
// #define BOARD_MODEL BOARD_GENERIC_ESP32
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
|
|
#define EEPROM_SIZE 1024
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
|
|
#define GPS_BAUD_RATE 9600
|
|
#define PIN_GPS_TX 12
|
|
#define PIN_GPS_RX 34
|
|
|
|
#if BOARD_MODEL == BOARD_GENERIC_ESP32
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 4;
|
|
const int pin_reset = 36;
|
|
const int pin_dio = 39;
|
|
const int pin_led_rx = 14;
|
|
const int pin_led_tx = 32;
|
|
|
|
#elif BOARD_MODEL == BOARD_TBEAM
|
|
#define HAS_DISPLAY true
|
|
#define HAS_PMU true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
#define I2C_SDA 21
|
|
#define I2C_SCL 22
|
|
#define PMU_IRQ 35
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 23;
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 4;
|
|
|
|
#if MODEM == SX1262
|
|
#define HAS_TCXO true
|
|
#define HAS_BUSY true
|
|
#define DIO2_AS_RF_SWITCH true
|
|
const int pin_busy = 32;
|
|
const int pin_dio = 33;
|
|
const int pin_tcxo_enable = -1;
|
|
#else
|
|
const int pin_dio = 26;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_HUZZAH32
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 4;
|
|
const int pin_reset = 36;
|
|
const int pin_dio = 39;
|
|
const int pin_led_rx = 14;
|
|
const int pin_led_tx = 32;
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V1_0
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 14;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 2;
|
|
#else
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 2;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V2_0
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 12;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 0;
|
|
#else
|
|
const int pin_led_rx = 22;
|
|
const int pin_led_tx = 22;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V2_1
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 23;
|
|
const int pin_dio = 26;
|
|
#if HAS_TCXO == true
|
|
const int pin_tcxo_enable = 33;
|
|
#endif
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 15;
|
|
const int pin_led_tx = 4;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_HELTEC32_V2
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 14;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 36;
|
|
const int pin_led_tx = 37;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_HELTEC32_V3
|
|
#define IS_ESP32S3 true
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
// Cannot run wifi and BLE at same time?
|
|
#define HAS_CONSOLE false
|
|
#define HAS_EEPROM true
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 13;
|
|
const int pin_led_tx = 14;
|
|
#else
|
|
const int pin_led_rx = 35;
|
|
const int pin_led_tx = 35;
|
|
#endif
|
|
|
|
#define MODEM SX1262
|
|
#define HAS_TCXO true
|
|
const int pin_tcxo_enable = -1;
|
|
#define HAS_BUSY true
|
|
#define DIO2_AS_RF_SWITCH true
|
|
|
|
// following pins are for the sx1262
|
|
const int pin_cs = 8;
|
|
const int pin_busy = 13;
|
|
const int pin_dio = 14;
|
|
const int pin_reset = 12;
|
|
const int pin_mosi = 10;
|
|
const int pin_miso = 11;
|
|
const int pin_sclk = 9;
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_20
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_NP true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 12;
|
|
const int pin_dio = 26;
|
|
const int pin_np = 4;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 0;
|
|
#else
|
|
const int pin_led_rx = 22;
|
|
const int pin_led_tx = 22;
|
|
#endif
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP true
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 23;
|
|
const int pin_dio = 26;
|
|
const int pin_np = 12;
|
|
const int pin_dac = 25;
|
|
const int pin_adc = 34;
|
|
const int SD_MISO = 2;
|
|
const int SD_MOSI = 15;
|
|
const int SD_CLK = 14;
|
|
const int SD_CS = 13;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 12;
|
|
const int pin_led_tx = 4;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
|
#define IS_ESP32S3 true
|
|
#define MODEM SX1262
|
|
#define DIO2_AS_RF_SWITCH true
|
|
#define HAS_BUSY true
|
|
#define HAS_TCXO true
|
|
|
|
#define HAS_DISPLAY true
|
|
#define HAS_CONSOLE false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
|
|
const int pin_cs = 7;
|
|
const int pin_reset = 8;
|
|
const int pin_sclk = 5;
|
|
const int pin_mosi = 6;
|
|
const int pin_miso = 3;
|
|
const int pin_tcxo_enable = -1;
|
|
|
|
const int pin_dio = 33;
|
|
const int pin_busy = 34;
|
|
|
|
const int pin_np = 38;
|
|
const int pin_dac = 25;
|
|
const int pin_adc = 1;
|
|
|
|
const int SD_MISO = 2;
|
|
const int SD_MOSI = 11;
|
|
const int SD_CLK = 14;
|
|
const int SD_CS = 13;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 37;
|
|
const int pin_led_tx = 37;
|
|
#else
|
|
const int pin_led_rx = 37;
|
|
const int pin_led_tx = 37;
|
|
#endif
|
|
#endif
|
|
|
|
#else
|
|
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
|
|
#endif
|
|
|
|
#elif MCU_VARIANT == MCU_NRF52
|
|
#if BOARD_MODEL == BOARD_RAK4630
|
|
#define HAS_EEPROM false
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE false
|
|
#define HAS_PMU false
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define HAS_TCXO true
|
|
#define HAS_RF_SWITCH_RX_TX true
|
|
#define HAS_BUSY true
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
#define EEPROM_SIZE 200
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
#define BLE_MANUFACTURER "RAK Wireless"
|
|
#define BLE_MODEL "RAK4640"
|
|
|
|
// Following pins are for the sx1262
|
|
const int pin_rxen = 37;
|
|
const int pin_reset = 38;
|
|
const int pin_cs = 42;
|
|
const int pin_sclk = 43;
|
|
const int pin_mosi = 44;
|
|
const int pin_miso = 45;
|
|
const int pin_busy = 46;
|
|
const int pin_dio = 47;
|
|
const int pin_led_rx = LED_BLUE;
|
|
const int pin_led_tx = LED_GREEN;
|
|
const int pin_tcxo_enable = -1;
|
|
|
|
#else
|
|
#error An unsupported nRF board was selected. Cannot compile RNode firmware.
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#ifndef HAS_RF_SWITCH_RX_TX
|
|
const int pin_rxen = -1;
|
|
const int pin_txen = -1;
|
|
#endif
|
|
|
|
#ifndef HAS_BUSY
|
|
const int pin_busy = -1;
|
|
#endif
|
|
|
|
#ifndef DIO2_AS_RF_SWITCH
|
|
#define DIO2_AS_RF_SWITCH false
|
|
#endif
|
|
|
|
#endif
|