opencom_xl_firmware/ROM.h

87 lines
2.3 KiB
C

// Copyright (C) 2023, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#ifndef ROM_H
#define ROM_H
#define CHECKSUMMED_SIZE 0x0B
#define PRODUCT_RNODE 0x03
#define PRODUCT_HMBRW 0xF0
#define PRODUCT_TBEAM 0xE0
#define PRODUCT_T32_10 0xB2
#define PRODUCT_T32_20 0xB0
#define PRODUCT_T32_21 0xB1
#define PRODUCT_H32_V2 0xC0
#define PRODUCT_H32_V3 0xC1
#define PRODUCT_RAK4631 0x10
#define MODEL_11 0x11
#define MODEL_12 0x12
#define MODEL_13 0x13 // RAK4631 with WisBlock SX1280 module (LIBSYS002)
#define MODEL_A1 0xA1
#define MODEL_A5 0xA5 // T3S3 SX1280 PA
#define MODEL_A6 0xA6
#define MODEL_A4 0xA4
#define MODEL_A9 0xA9
#define MODEL_A3 0xA3
#define MODEL_A8 0xA8
#define MODEL_A2 0xA2
#define MODEL_A7 0xA7
#define MODEL_B3 0xB3
#define MODEL_B8 0xB8
#define MODEL_B4 0xB4
#define MODEL_B9 0xB9
#define MODEL_BA 0xBA
#define MODEL_BB 0xBB
#define MODEL_C4 0xC4
#define MODEL_C9 0xC9
#define MODEL_C5 0xC5
#define MODEL_CA 0xCA
#define MODEL_E4 0xE4
#define MODEL_E9 0xE9
#define MODEL_E3 0xE3
#define MODEL_E8 0xE8
#define MODEL_FE 0xFE
#define MODEL_FF 0xFF
#define ADDR_PRODUCT 0x00
#define ADDR_MODEL 0x01
#define ADDR_HW_REV 0x02
#define ADDR_SERIAL 0x03
#define ADDR_MADE 0x07
#define ADDR_CHKSUM 0x0B
#define ADDR_SIGNATURE 0x1B
#define ADDR_INFO_LOCK 0x9B
#define ADDR_CONF_SF 0x9C
#define ADDR_CONF_CR 0x9D
#define ADDR_CONF_TXP 0x9E
#define ADDR_CONF_BW 0x9F
#define ADDR_CONF_FREQ 0xA3
#define ADDR_CONF_OK 0xA7
#define ADDR_CONF_BT 0xB0
#define ADDR_CONF_DSET 0xB1
#define ADDR_CONF_DINT 0xB2
#define ADDR_CONF_DADR 0xB3
#define INFO_LOCK_BYTE 0x73
#define CONF_OK_BYTE 0x73
#define BT_ENABLE_BYTE 0x73
#define EEPROM_RESERVED 200
#endif