arduino-esp32/cores/esp32/esp32-hal-i2c.c

1779 lines
67 KiB
C
Raw Normal View History

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
2016-10-06 13:21:30 +02:00
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp32-hal-i2c.h"
2016-10-11 14:11:51 +02:00
#include "esp32-hal.h"
2016-10-06 13:21:30 +02:00
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
2016-10-11 13:20:02 +02:00
#include "freertos/semphr.h"
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
#include "freertos/event_groups.h"
2016-10-06 13:21:30 +02:00
#include "rom/ets_sys.h"
#include "driver/periph_ctrl.h"
2016-10-06 13:21:30 +02:00
#include "soc/i2c_reg.h"
2016-10-11 14:11:51 +02:00
#include "soc/i2c_struct.h"
2016-10-06 13:21:30 +02:00
#include "soc/dport_reg.h"
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
#include "esp_attr.h"
#include "esp32-hal-cpu.h" // cpu clock change support 31DEC2018
2016-10-11 14:11:51 +02:00
//#define I2C_DEV(i) (volatile i2c_dev_t *)((i)?DR_REG_I2C1_EXT_BASE:DR_REG_I2C_EXT_BASE)
//#define I2C_DEV(i) ((i2c_dev_t *)(REG_I2C_BASE(i)))
2016-10-06 13:21:30 +02:00
#define I2C_SCL_IDX(p) ((p==0)?I2CEXT0_SCL_OUT_IDX:((p==1)?I2CEXT1_SCL_OUT_IDX:0))
#define I2C_SDA_IDX(p) ((p==0)?I2CEXT0_SDA_OUT_IDX:((p==1)?I2CEXT1_SDA_OUT_IDX:0))
#define DR_REG_I2C_EXT_BASE_FIXED 0x60013000
#define DR_REG_I2C1_EXT_BASE_FIXED 0x60027000
2016-10-11 13:20:02 +02:00
/* Stickbreaker ISR mode debug support
ENABLE_I2C_DEBUG_BUFFER
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
Enable debug interrupt history buffer, fifoTx history buffer.
Setting this define will result in 2570 bytes of RAM being used whenever CORE_DEBUG_LEVEL
is higher than WARNING. Unless you are debugging a problem in the I2C subsystem,
I would recommend you leave it commented out.
*/
//#define ENABLE_I2C_DEBUG_BUFFER
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO) && (defined ENABLE_I2C_DEBUG_BUFFER)
#define INTBUFFMAX 64
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#define FIFOMAX 512
static uint32_t intBuff[INTBUFFMAX][3][2];
static uint32_t intPos[2]= {0,0};
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static uint16_t fifoBuffer[FIFOMAX];
static uint16_t fifoPos = 0;
#endif
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// start from tools/sdk/include/soc/soc/i2c_struct.h
typedef union {
struct {
uint32_t byte_num: 8; /*Byte_num represent the number of data need to be send or data need to be received.*/
uint32_t ack_en: 1; /*ack_check_en ack_exp and ack value are used to control the ack bit.*/
uint32_t ack_exp: 1; /*ack_check_en ack_exp and ack value are used to control the ack bit.*/
uint32_t ack_val: 1; /*ack_check_en ack_exp and ack value are used to control the ack bit.*/
uint32_t op_code: 3; /*op_code is the command 0RSTART 1WRITE 2READ 3STOP . 4:END.*/
uint32_t reserved14: 17;
uint32_t done: 1; /*When command0 is done in I2C Master mode this bit changes to high level.*/
};
uint32_t val;
} I2C_COMMAND_t;
typedef union {
struct {
uint32_t rx_fifo_full_thrhd: 5;
uint32_t tx_fifo_empty_thrhd:5; //Config tx_fifo empty threhd value when using apb fifo access * /
uint32_t nonfifo_en: 1; //Set this bit to enble apb nonfifo access. * /
uint32_t fifo_addr_cfg_en: 1; //When this bit is set to 1 then the byte after address represent the offset address of I2C Slave's ram. * /
uint32_t rx_fifo_rst: 1; //Set this bit to reset rx fifo when using apb fifo access. * /
// chuck while this bit is 1, the RX fifo is held in REST, Toggle it * /
uint32_t tx_fifo_rst: 1; //Set this bit to reset tx fifo when using apb fifo access. * /
// chuck while this bit is 1, the TX fifo is held in REST, Toggle it * /
uint32_t nonfifo_rx_thres: 6; //when I2C receives more than nonfifo_rx_thres data it will produce rx_send_full_int_raw interrupt and update the current offset address of the receiving data.* /
uint32_t nonfifo_tx_thres: 6; //when I2C sends more than nonfifo_tx_thres data it will produce tx_send_empty_int_raw interrupt and update the current offset address of the sending data. * /
uint32_t reserved26: 6;
};
uint32_t val;
} I2C_FIFO_CONF_t;
typedef union {
struct {
uint32_t rx_fifo_start_addr: 5; /*This is the offset address of the last receiving data as described in nonfifo_rx_thres_register.*/
uint32_t rx_fifo_end_addr: 5; /*This is the offset address of the first receiving data as described in nonfifo_rx_thres_register.*/
uint32_t tx_fifo_start_addr: 5; /*This is the offset address of the first sending data as described in nonfifo_tx_thres register.*/
uint32_t tx_fifo_end_addr: 5; /*This is the offset address of the last sending data as described in nonfifo_tx_thres register.*/
uint32_t reserved20: 12;
};
uint32_t val;
} I2C_FIFO_ST_t;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// end from tools/sdk/include/soc/soc/i2c_struct.h
// sync between dispatch(i2cProcQueue) and worker(i2c_isr_handler_default)
typedef enum {
//I2C_NONE=0,
I2C_STARTUP=1,
I2C_RUNNING,
I2C_DONE
} I2C_STAGE_t;
typedef enum {
I2C_NONE=0,
I2C_MASTER,
I2C_SLAVE,
I2C_MASTERSLAVE
} I2C_MODE_t;
// internal Error condition
typedef enum {
// I2C_NONE=0,
I2C_OK=1,
I2C_ERROR,
I2C_ADDR_NAK,
I2C_DATA_NAK,
I2C_ARBITRATION,
I2C_TIMEOUT
} I2C_ERROR_t;
// i2c_event bits for EVENTGROUP bits
// needed to minimize change events, FreeRTOS Daemon overload, so ISR will only set values
// on Exit. Dispatcher will set bits for each dq before/after ISR completion
#define EVENT_ERROR_NAK (BIT(0))
#define EVENT_ERROR (BIT(1))
#define EVENT_ERROR_BUS_BUSY (BIT(2))
#define EVENT_RUNNING (BIT(3))
#define EVENT_DONE (BIT(4))
#define EVENT_IN_END (BIT(5))
#define EVENT_ERROR_PREV (BIT(6))
#define EVENT_ERROR_TIMEOUT (BIT(7))
#define EVENT_ERROR_ARBITRATION (BIT(8))
#define EVENT_ERROR_DATA_NAK (BIT(9))
#define EVENT_MASK 0x3F
// control record for each dq entry
typedef union {
struct {
uint32_t addr: 16; // I2C address, if 10bit must have 0x7800 mask applied, else 8bit
uint32_t mode: 1; // transaction direction 0 write, 1 read
uint32_t stop: 1; // sendStop 0 no, 1 yes
uint32_t startCmdSent: 1; // START cmd has been added to command[]
uint32_t addrCmdSent: 1; // addr WRITE cmd has been added to command[]
uint32_t dataCmdSent: 1; // all necessary DATA(READ/WRITE) cmds added to command[]
uint32_t stopCmdSent: 1; // completed all necessary commands
uint32_t addrReq: 2; // number of addr bytes need to send address
uint32_t addrSent: 2; // number of addr bytes added to FIFO
uint32_t reserved_31: 6;
};
uint32_t val;
} I2C_DATA_CTRL_t;
// individual dq element
typedef struct {
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint8_t *data; // data pointer for read/write buffer
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
uint16_t length; // size of data buffer
uint16_t position; // current position for next char in buffer (<length)
uint16_t cmdBytesNeeded; // used to control number of I2C_COMMAND_t blocks added to queue
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
I2C_DATA_CTRL_t ctrl;
EventGroupHandle_t queueEvent; // optional user supplied for Async feedback EventBits
} I2C_DATA_QUEUE_t;
2016-10-11 13:20:02 +02:00
struct i2c_struct_t {
i2c_dev_t * dev;
#if !CONFIG_DISABLE_HAL_LOCKS
2016-10-11 13:20:02 +02:00
xSemaphoreHandle lock;
#endif
2016-10-11 13:20:02 +02:00
uint8_t num;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
int8_t sda;
int8_t scl;
I2C_MODE_t mode;
I2C_STAGE_t stage;
I2C_ERROR_t error;
EventGroupHandle_t i2c_event; // a way to monitor ISR process
// maybe use it to trigger callback for OnRequest()
intr_handle_t intr_handle; /*!< I2C interrupt handle*/
I2C_DATA_QUEUE_t * dq;
uint16_t queueCount; // number of dq entries in queue.
uint16_t queuePos; // current queue that still has or needs data (out/in)
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
int16_t errorByteCnt; // byte pos where error happened, -1 devId, 0..(length-1) data
uint16_t errorQueue; // errorByteCnt is in this queue,(for error locus)
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
uint32_t exitCode;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint32_t debugFlags;
2016-10-11 13:20:02 +02:00
};
enum {
I2C_CMD_RSTART,
I2C_CMD_WRITE,
I2C_CMD_READ,
I2C_CMD_STOP,
I2C_CMD_END
};
#if CONFIG_DISABLE_HAL_LOCKS
#define I2C_MUTEX_LOCK()
#define I2C_MUTEX_UNLOCK()
static i2c_t _i2c_bus_array[2] = {
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
{(volatile i2c_dev_t *)(DR_REG_I2C_EXT_BASE_FIXED), 0, -1, -1,I2C_NONE,I2C_NONE,I2C_ERROR_OK,NULL,NULL,NULL,0,0,0,0,0},
{(volatile i2c_dev_t *)(DR_REG_I2C1_EXT_BASE_FIXED), 1, -1, -1,I2C_NONE,I2C_NONE,I2C_ERROR_OK,NULL,NULL,NULL,0,0,0,0,0}
};
#else
#define I2C_MUTEX_LOCK() do {} while (xSemaphoreTakeRecursive(i2c->lock, portMAX_DELAY) != pdPASS)
#define I2C_MUTEX_UNLOCK() xSemaphoreGiveRecursive(i2c->lock)
2016-10-11 13:20:02 +02:00
static i2c_t _i2c_bus_array[2] = {
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
{(volatile i2c_dev_t *)(DR_REG_I2C_EXT_BASE_FIXED), NULL, 0, -1, -1, I2C_NONE,I2C_NONE,I2C_ERROR_OK,NULL,NULL,NULL,0,0,0,0,0,0},
{(volatile i2c_dev_t *)(DR_REG_I2C1_EXT_BASE_FIXED), NULL, 1, -1, -1,I2C_NONE,I2C_NONE,I2C_ERROR_OK,NULL,NULL,NULL,0,0,0,0,0,0}
2016-10-11 13:20:02 +02:00
};
#endif
2016-10-11 13:20:02 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
/*
* index - command index (0 to 15)
* op_code - is the command
* byte_num - This register is to store the amounts of data that is read and written. byte_num in RSTART, STOP, END is null.
* ack_val - Each data byte is terminated by an ACK bit used to set the bit level.
* ack_exp - This bit is to set an expected ACK value for the transmitter.
* ack_check - This bit is to decide whether the transmitter checks ACK bit. 1 means yes and 0 means no.
* */
/* Stickbreaker ISR mode debug support
*/
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static void IRAM_ATTR i2cDumpCmdQueue(i2c_t *i2c)
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
{
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_ERROR)&&(defined ENABLE_I2C_DEBUG_BUFFER)
static const char * const cmdName[] ={"RSTART","WRITE","READ","STOP","END"};
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
uint8_t i=0;
while(i<16) {
I2C_COMMAND_t c;
c.val=i2c->dev->command[i].val;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
log_e("[%2d]\t%c\t%s\tval[%d]\texp[%d]\ten[%d]\tbytes[%d]",i,(c.done?'Y':'N'),
cmdName[c.op_code],
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
c.ack_val,
c.ack_exp,
c.ack_en,
c.byte_num);
i++;
}
#endif
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
/* Stickbreaker ISR mode debug support
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
*/
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO)
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static void i2cDumpDqData(i2c_t * i2c)
{
#if defined (ENABLE_I2C_DEBUG_BUFFER)
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint16_t a=0;
char buff[140];
I2C_DATA_QUEUE_t *tdq;
int digits=0,lenDigits=0;
a = i2c->queueCount;
while(a>0) {
digits++;
a /= 10;
}
while(a<i2c->queueCount) { // find maximum number of len decimal digits for formatting
if (i2c->dq[a].length > lenDigits ) lenDigits = i2c->dq[a].length;
a++;
}
a=0;
while(lenDigits>0){
a++;
lenDigits /= 10;
}
lenDigits = a;
a = 0;
while(a<i2c->queueCount) {
tdq=&i2c->dq[a];
char buf1[10],buf2[10];
sprintf(buf1,"%0*d",lenDigits,tdq->length);
sprintf(buf2,"%0*d",lenDigits,tdq->position);
log_i("[%0*d] %sbit %x %c %s buf@=%p, len=%s, pos=%s, ctrl=%d%d%d%d%d",digits,a,
(tdq->ctrl.addr>0x100)?"10":"7",
(tdq->ctrl.addr>0x100)?(((tdq->ctrl.addr&0x600)>>1)|(tdq->ctrl.addr&0xff)):(tdq->ctrl.addr>>1),
(tdq->ctrl.mode)?'R':'W',
(tdq->ctrl.stop)?"STOP":"",
tdq->data,
buf1,buf2,
tdq->ctrl.startCmdSent,tdq->ctrl.addrCmdSent,tdq->ctrl.dataCmdSent,(tdq->ctrl.stop)?tdq->ctrl.stopCmdSent:0,tdq->ctrl.addrSent
);
uint16_t offset = 0;
while(offset<tdq->length) {
memset(buff,' ',140);
buff[139]='\0';
uint16_t i = 0,j;
j=sprintf(buff,"0x%04x: ",offset);
while((i<32)&&(offset < tdq->length)) {
char ch = tdq->data[offset];
sprintf((char*)&buff[(i*3)+41],"%02x ",ch);
if((ch<32)||(ch>126)) {
ch='.';
}
j+=sprintf((char*)&buff[j],"%c",ch);
buff[j]=' ';
i++;
offset++;
}
log_i("%s",buff);
}
a++;
}
#else
log_i("Debug Buffer not Enabled");
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#endif
}
#endif
#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static void i2cDumpI2c(i2c_t * i2c)
{
log_e("i2c=%p",i2c);
log_i("dev=%p date=%p",i2c->dev,i2c->dev->date);
#if !CONFIG_DISABLE_HAL_LOCKS
log_i("lock=%p",i2c->lock);
#endif
log_i("num=%d",i2c->num);
log_i("mode=%d",i2c->mode);
log_i("stage=%d",i2c->stage);
log_i("error=%d",i2c->error);
log_i("event=%p bits=%x",i2c->i2c_event,(i2c->i2c_event)?xEventGroupGetBits(i2c->i2c_event):0);
log_i("intr_handle=%p",i2c->intr_handle);
log_i("dq=%p",i2c->dq);
log_i("queueCount=%d",i2c->queueCount);
log_i("queuePos=%d",i2c->queuePos);
log_i("errorByteCnt=%d",i2c->errorByteCnt);
log_i("errorQueue=%d",i2c->errorQueue);
log_i("debugFlags=0x%08X",i2c->debugFlags);
if(i2c->dq) {
i2cDumpDqData(i2c);
}
}
#endif
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO)
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static void i2cDumpInts(uint8_t num)
{
#if defined (ENABLE_I2C_DEBUG_BUFFER)
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint32_t b;
log_i("%u row\tcount\tINTR\tTX\tRX\tTick ",num);
for(uint32_t a=1; a<=INTBUFFMAX; a++) {
b=(a+intPos[num])%INTBUFFMAX;
if(intBuff[b][0][num]!=0) {
log_i("[%02d]\t0x%04x\t0x%04x\t0x%04x\t0x%04x\t0x%08x",b,((intBuff[b][0][num]>>16)&0xFFFF),(intBuff[b][0][num]&0xFFFF),((intBuff[b][1][num]>>16)&0xFFFF),(intBuff[b][1][num]&0xFFFF),intBuff[b][2][num]);
}
}
#else
log_i("Debug Buffer not Enabled");
#endif
}
#endif
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO)&&(defined ENABLE_I2C_DEBUG_BUFFER)
static void IRAM_ATTR i2cDumpStatus(i2c_t * i2c){
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
typedef union {
struct {
uint32_t ack_rec: 1; /*This register stores the value of ACK bit.*/
uint32_t slave_rw: 1; /*when in slave mode 1master read slave 0: master write slave.*/
uint32_t time_out: 1; /*when I2C takes more than time_out_reg clocks to receive a data then this register changes to high level.*/
uint32_t arb_lost: 1; /*when I2C lost control of SDA line this register changes to high level.*/
uint32_t bus_busy: 1; /*1:I2C bus is busy transferring data. 0:I2C bus is in idle state.*/
uint32_t slave_addressed: 1; /*when configured as i2c slave and the address send by master is equal to slave's address then this bit will be high level.*/
uint32_t byte_trans: 1; /*This register changes to high level when one byte is transferred.*/
uint32_t reserved7: 1;
uint32_t rx_fifo_cnt: 6; /*This register represent the amount of data need to send.*/
uint32_t reserved14: 4;
uint32_t tx_fifo_cnt: 6; /*This register stores the amount of received data in ram.*/
uint32_t scl_main_state_last: 3; /*This register stores the value of state machine for i2c module. 3'h0: SCL_MAIN_IDLE 3'h1: SCL_ADDRESS_SHIFT 3'h2: SCL_ACK_ADDRESS 3'h3: SCL_RX_DATA 3'h4 SCL_TX_DATA 3'h5:SCL_SEND_ACK 3'h6:SCL_WAIT_ACK*/
uint32_t reserved27: 1;
uint32_t scl_state_last: 3; /*This register stores the value of state machine to produce SCL. 3'h0: SCL_IDLE 3'h1:SCL_START 3'h2:SCL_LOW_EDGE 3'h3: SCL_LOW 3'h4:SCL_HIGH_EDGE 3'h5:SCL_HIGH 3'h6:SCL_STOP*/
uint32_t reserved31: 1;
};
uint32_t val;
} status_reg;
status_reg sr;
sr.val= i2c->dev->status_reg.val;
log_i("ack(%d) sl_rw(%d) to(%d) arb(%d) busy(%d) sl(%d) trans(%d) rx(%d) tx(%d) sclMain(%d) scl(%d)",sr.ack_rec,sr.slave_rw,sr.time_out,sr.arb_lost,sr.bus_busy,sr.slave_addressed,sr.byte_trans, sr.rx_fifo_cnt, sr.tx_fifo_cnt,sr.scl_main_state_last, sr.scl_state_last);
}
#endif
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO)&&(defined ENABLE_I2C_DEBUG_BUFFER)
static void i2cDumpFifo(i2c_t * i2c){
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
char buf[64];
uint16_t k = 0;
uint16_t i = fifoPos+1;
i %=FIFOMAX;
while((fifoBuffer[i]==0)&&(i!=fifoPos)){
i++;
i %=FIFOMAX;
}
if(i != fifoPos){// actual data
do{
if(fifoBuffer[i] & 0x8000){ // address byte
if(fifoBuffer[i] & 0x100) { // read
if(fifoBuffer[i] & 0x1) { // valid read dev id
k+= sprintf(&buf[k],"READ 0x%02X",(fifoBuffer[i]&0xff)>>1);
} else { // invalid read dev id
k+= sprintf(&buf[k],"Bad READ 0x%02X",(fifoBuffer[i]&0xff));
}
} else { // write
if(fifoBuffer[i] & 0x1) { // bad write dev id
k+= sprintf(&buf[k],"bad WRITE 0x%02X",(fifoBuffer[i]&0xff));
} else { // good Write
k+= sprintf(&buf[k],"WRITE 0x%02X",(fifoBuffer[i]&0xff)>>1);
}
}
} else k += sprintf(&buf[k],"% 4X ",fifoBuffer[i]);
i++;
i %= FIFOMAX;
bool outBuffer=false;
if( fifoBuffer[i] & 0x8000){
outBuffer=true;
k=0;
}
if((outBuffer)||(k>50)||(i==fifoPos)) log_i("%s",buf);
outBuffer = false;
if(k>50) {
k=sprintf(buf,"-> ");
}
}while( i!= fifoPos);
}
}
#endif
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static void IRAM_ATTR i2cTriggerDumps(i2c_t * i2c, uint8_t trigger, const char locus[]){
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO)&&(defined ENABLE_I2C_DEBUG_BUFFER)
if( trigger ){
log_i("%s",locus);
if(trigger & 1) i2cDumpI2c(i2c);
if(trigger & 2) i2cDumpInts(i2c->num);
if(trigger & 4) i2cDumpCmdQueue(i2c);
if(trigger & 8) i2cDumpStatus(i2c);
if(trigger & 16) i2cDumpFifo(i2c);
}
#endif
}
// end of debug support routines
/* Start of CPU Clock change Support
*/
static void i2cApbChangeCallback(void * arg, apb_change_ev_t ev_type, uint32_t old_apb, uint32_t new_apb){
i2c_t* i2c = (i2c_t*) arg; // recover data
if(i2c == NULL) { // point to peripheral control block does not exits
return;
}
uint32_t oldFreq=0;
switch(ev_type){
case APB_BEFORE_CHANGE :
if(new_apb < 3000000) {// too slow
log_e("apb speed %d too slow",new_apb);
break;
}
I2C_MUTEX_LOCK(); // lock will spin until current transaction is completed
break;
case APB_AFTER_CHANGE :
oldFreq = (i2c->dev->scl_low_period.period+i2c->dev->scl_high_period.period); //read old apbCycles
if(oldFreq>0) { // was configured with value
oldFreq = old_apb / oldFreq;
i2cSetFrequency(i2c,oldFreq);
}
I2C_MUTEX_UNLOCK();
break;
default :
log_e("unk ev %u",ev_type);
I2C_MUTEX_UNLOCK();
}
return;
}
/* End of CPU Clock change Support
*/
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static void IRAM_ATTR i2cSetCmd(i2c_t * i2c, uint8_t index, uint8_t op_code, uint8_t byte_num, bool ack_val, bool ack_exp, bool ack_check)
{
I2C_COMMAND_t cmd;
cmd.val=0;
cmd.ack_en = ack_check;
cmd.ack_exp = ack_exp;
cmd.ack_val = ack_val;
cmd.byte_num = byte_num;
cmd.op_code = op_code;
i2c->dev->command[index].val = cmd.val;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
static void IRAM_ATTR fillCmdQueue(i2c_t * i2c, bool INTS)
{
/* this function is called on initial i2cProcQueue() or when a I2C_END_DETECT_INT occurs
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
*/
uint16_t cmdIdx = 0;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint16_t qp = i2c->queuePos; // all queues before queuePos have been completely processed,
// so look start by checking the 'current queue' so see if it needs commands added to
// hardware peripheral command list. walk through each queue entry until all queues have been
// checked
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
bool done;
bool needMoreCmds = false;
bool ena_rx=false; // if we add a read op, better enable Rx_Fifo IRQ
bool ena_tx=false; // if we add a Write op, better enable TX_Fifo IRQ
while(!needMoreCmds&&(qp < i2c->queueCount)) { // check if more possible cmds
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if(i2c->dq[qp].ctrl.stopCmdSent) {// marks that all required cmds[] have been added to peripheral
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
qp++;
} else {
needMoreCmds=true;
}
}
//log_e("needMoreCmds=%d",needMoreCmds);
done=(!needMoreCmds)||(cmdIdx>14);
while(!done) { // fill the command[] until either 0..14 filled or out of cmds and last cmd is STOP
//CMD START
I2C_DATA_QUEUE_t *tdq=&i2c->dq[qp]; // simpler coding
if((!tdq->ctrl.startCmdSent) && (cmdIdx < 14)) { // has this dq element's START command been added?
// (cmdIdx<14) because a START op cannot directly precede an END op, else a time out cascade occurs
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cSetCmd(i2c, cmdIdx++, I2C_CMD_RSTART, 0, false, false, false);
tdq->ctrl.startCmdSent=1;
}
//CMD WRITE ADDRESS
if((!done)&&(tdq->ctrl.startCmdSent)) { // have to leave room for continue(END), and START must have been sent!
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(!tdq->ctrl.addrCmdSent) {
i2cSetCmd(i2c, cmdIdx++, I2C_CMD_WRITE, tdq->ctrl.addrReq, false, false, true); //load address in cmdlist, validate (low) ack
tdq->ctrl.addrCmdSent=1;
done =(cmdIdx>14);
ena_tx=true; // tx Data necessary
}
}
/* Can I have another Sir?
ALL CMD queues must be terminated with either END or STOP.
If END is used, when refilling the cmd[] next time, no entries from END to [15] can be used.
AND the cmd[] must be filled starting at [0] with commands. Either fill all 15 [0]..[14] and leave the
END in [15] or include a STOP in one of the positions [0]..[14]. Any entries after a STOP are IGNORED by the StateMachine.
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
The END operation does not complete until ctr->trans_start=1 has been issued.
So, only refill from [0]..[14], leave [15] for a continuation(END) if necessary.
As a corollary, once END exists in [15], you do not need to overwrite it for the
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
next continuation. It is never modified. But, I update it every time because it might
actually be the first time!
23NOV17 START cannot proceed END. if START is in[14], END cannot be in [15].
So, if END is moved to [14], [14] and [15] can no longer be used for anything other than END.
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
If a START is found in [14] then a prior READ or WRITE must be expanded so that there is no START element in [14].
*/
if((!done)&&(tdq->ctrl.addrCmdSent)) { //room in command[] for at least One data (read/Write) cmd
uint8_t blkSize=0; // max is 255
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
while(( tdq->cmdBytesNeeded > tdq->ctrl.mode )&&(!done )) { // more bytes needed and room in cmd queue, leave room for END
blkSize = (tdq->cmdBytesNeeded > 255)?255:(tdq->cmdBytesNeeded - tdq->ctrl.mode); // Last read cmd needs different ACK setting, so leave 1 byte remainder on reads
tdq->cmdBytesNeeded -= blkSize;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(tdq->ctrl.mode==1) { //read mode
i2cSetCmd(i2c, (cmdIdx)++, I2C_CMD_READ, blkSize,false,false,false); // read cmd, this can't be the last read.
ena_rx=true; // need to enable rxFifo IRQ
} else { // write
i2cSetCmd(i2c, cmdIdx++, I2C_CMD_WRITE, blkSize, false, false, true); // check for Nak
ena_tx=true; // need to enable txFifo IRQ
}
done = cmdIdx>14; //have to leave room for END
}
if(!done) { // buffer is not filled completely
if((tdq->ctrl.mode==1)&&(tdq->cmdBytesNeeded==1)) { //special last read byte NAK
i2cSetCmd(i2c, (cmdIdx)++, I2C_CMD_READ, 1,true,false,false);
// send NAK to mark end of read
tdq->cmdBytesNeeded=0;
done = cmdIdx > 14;
ena_rx=true;
}
}
tdq->ctrl.dataCmdSent=(tdq->cmdBytesNeeded==0); // enough command[] to send all data
if((!done)&&(tdq->ctrl.dataCmdSent)) { // possibly add stop
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if(!tdq->ctrl.stopCmdSent){
if(tdq->ctrl.stop) { //send a stop
i2cSetCmd(i2c, (cmdIdx)++,I2C_CMD_STOP,0,false,false,false);
done = cmdIdx > 14;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
tdq->ctrl.stopCmdSent = 1;
}
}
}
if((cmdIdx==14)&&(!tdq->ctrl.startCmdSent)) {
// START would have preceded END, causes SM TIMEOUT
// need to stretch out a prior WRITE or READ to two Command[] elements
done = false; // reuse it
uint16_t i = 13; // start working back until a READ/WRITE has >1 numBytes
cmdIdx =15;
while(!done) {
i2c->dev->command[i+1].val = i2c->dev->command[i].val; // push it down
if (((i2c->dev->command[i].op_code == 1)||(i2c->dev->command[i].op_code==2))) {
/* add a dummy read/write cmd[] with num_bytes set to zero,just a place holder in the cmd[]list
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
*/
i2c->dev->command[i].byte_num = 0;
done = true;
} else {
if(i > 0) {
i--;
} else { // unable to stretch, fatal
log_e("invalid CMD[] layout Stretch Failed");
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
i2cDumpCmdQueue(i2c);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
done = true;
}
}
}
}
if(cmdIdx==15) { //need continuation, even if STOP is in 14, it will not matter
// cmd buffer is almost full, Add END as a continuation feature
i2cSetCmd(i2c, (cmdIdx)++,I2C_CMD_END, 0,false,false,false);
i2c->dev->int_ena.end_detect=1;
i2c->dev->int_clr.end_detect=1;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
done = true;
}
if(!done) {
if(tdq->ctrl.stopCmdSent) { // this queue element has been completely added to command[] buffer
qp++;
if(qp < i2c->queueCount) {
tdq = &i2c->dq[qp];
} else {
done = true;
}
}
}
}// while(!done)
if(INTS) { // don't want to prematurely enable fifo ints until ISR is ready to handle them.
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(ena_rx) {
i2c->dev->int_ena.rx_fifo_full = 1;
}
if(ena_tx) {
i2c->dev->int_ena.tx_fifo_empty = 1;
}
}
}
static void IRAM_ATTR fillTxFifo(i2c_t * i2c)
{
/*
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
12/01/2017 The Fifo's are independent, 32 bytes of tx and 32 bytes of Rx.
overlap is not an issue, just keep them full/empty the status_reg.xx_fifo_cnt
tells the truth. And the INT's fire correctly
*/
uint16_t a=i2c->queuePos; // currently executing dq,
bool full=!(i2c->dev->status_reg.tx_fifo_cnt<31);
uint8_t cnt;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
bool rxQueueEncountered = false;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
while((a < i2c->queueCount) && !full) {
I2C_DATA_QUEUE_t *tdq = &i2c->dq[a];
cnt=0;
// add to address to fifo ctrl.addr already has R/W bit positioned correctly
if(tdq->ctrl.addrSent < tdq->ctrl.addrReq) { // need to send address bytes
if(tdq->ctrl.addrReq==2) { //10bit
if(tdq->ctrl.addrSent==0) { //10bit highbyte needs sent
if(!full) { // room in fifo
i2c->dev->fifo_data.val = ((tdq->ctrl.addr>>8)&0xFF);
cnt++;
tdq->ctrl.addrSent=1; //10bit highbyte sent
}
}
full=!(i2c->dev->status_reg.tx_fifo_cnt<31);
if(tdq->ctrl.addrSent==1) { //10bit Lowbyte needs sent
if(!full) { // room in fifo
i2c->dev->fifo_data.val = tdq->ctrl.addr&0xFF;
cnt++;
tdq->ctrl.addrSent=2; //10bit lowbyte sent
}
}
} else { // 7bit}
if(tdq->ctrl.addrSent==0) { // 7bit Lowbyte needs sent
if(!full) { // room in fifo
i2c->dev->fifo_data.val = tdq->ctrl.addr&0xFF;
cnt++;
tdq->ctrl.addrSent=1; // 7bit lowbyte sent
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO) && (defined ENABLE_I2C_DEBUG_BUFFER)
uint16_t a = 0x8000 | tdq->ctrl.addr | (tdq->ctrl.mode<<8);
fifoBuffer[fifoPos++] = a;
fifoPos %= FIFOMAX;
#endif
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
}
}
}
// add write data to fifo
if(tdq->ctrl.mode==0) { // write
if(tdq->ctrl.addrSent == tdq->ctrl.addrReq) { //address has been sent, is Write Mode!
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint32_t moveCnt = 32 - i2c->dev->status_reg.tx_fifo_cnt; // how much room in txFifo?
while(( moveCnt>0)&&(tdq->position < tdq->length)) {
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO) && (defined ENABLE_I2C_DEBUG_BUFFER)
fifoBuffer[fifoPos++] = tdq->data[tdq->position];
fifoPos %= FIFOMAX;
#endif
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c->dev->fifo_data.val = tdq->data[tdq->position++];
cnt++;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
moveCnt--;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
} else { // read Queue Encountered, can't update QueuePos past this point, emptyRxfifo will do it
if( ! rxQueueEncountered ) {
rxQueueEncountered = true;
if(a > i2c->queuePos){
i2c->queuePos = a;
}
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO) && (defined ENABLE_I2C_DEBUG_BUFFER)
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// update debug buffer tx counts
cnt += intBuff[intPos[i2c->num]][1][i2c->num]>>16;
intBuff[intPos[i2c->num]][1][i2c->num] = (intBuff[intPos[i2c->num]][1][i2c->num]&0xFFFF)|(cnt<<16);
#endif
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
full=!(i2c->dev->status_reg.tx_fifo_cnt<31);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(!full) {
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
a++; // check next buffer for address tx, or write data
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if(a >= i2c->queueCount ) { // disable TX IRQ, all tx Data has been queued
i2c->dev->int_ena.tx_fifo_empty= 0;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
i2c->dev->int_clr.tx_fifo_empty=1;
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
static void IRAM_ATTR emptyRxFifo(i2c_t * i2c)
{
uint32_t d, cnt=0, moveCnt;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
moveCnt = i2c->dev->status_reg.rx_fifo_cnt;//no need to check the reg until this many are read
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
while((moveCnt > 0)&&(i2c->queuePos < i2c->queueCount)){ // data to move
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
I2C_DATA_QUEUE_t *tdq =&i2c->dq[i2c->queuePos]; //short cut
while((tdq->position >= tdq->length)&&( i2c->queuePos < i2c->queueCount)){ // find were to store
i2c->queuePos++;
tdq = &i2c->dq[i2c->queuePos];
}
if(i2c->queuePos >= i2c->queueCount){ // bad stuff, rx data but no place to put it!
log_e("no Storage location for %d",moveCnt);
// discard
while(moveCnt>0){
d = i2c->dev->fifo_data.val;
moveCnt--;
cnt++;
}
break;
}
if(tdq->ctrl.mode == 1){ // read command
if(moveCnt > (tdq->length - tdq->position)) { //make sure they go in this dq
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
// part of these reads go into the next dq
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
moveCnt = (tdq->length - tdq->position);
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
} else {// error
log_e("RxEmpty(%d) call on TxBuffer? dq=%d",moveCnt,i2c->queuePos);
// discard
while(moveCnt>0){
d = i2c->dev->fifo_data.val;
moveCnt--;
cnt++;
}
break;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
while(moveCnt > 0) { // store data
d = i2c->dev->fifo_data.val;
moveCnt--;
cnt++;
tdq->data[tdq->position++] = (d&0xFF);
}
moveCnt = i2c->dev->status_reg.rx_fifo_cnt; //any more out there?
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO)&& (defined ENABLE_I2C_DEBUG_BUFFER)
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// update Debug rxCount
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
cnt += (intBuff[intPos[i2c->num]][1][i2c->num])&0xffFF;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
intBuff[intPos[i2c->num]][1][i2c->num] = (intBuff[intPos[i2c->num]][1][i2c->num]&0xFFFF0000)|cnt;
#endif
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
static void IRAM_ATTR i2cIsrExit(i2c_t * i2c,const uint32_t eventCode,bool Fatal)
{
switch(eventCode) {
case EVENT_DONE:
i2c->error = I2C_OK;
break;
case EVENT_ERROR_NAK :
i2c->error =I2C_ADDR_NAK;
break;
case EVENT_ERROR_DATA_NAK :
i2c->error =I2C_DATA_NAK;
break;
case EVENT_ERROR_TIMEOUT :
i2c->error = I2C_TIMEOUT;
break;
case EVENT_ERROR_ARBITRATION:
i2c->error = I2C_ARBITRATION;
break;
default :
i2c->error = I2C_ERROR;
}
uint32_t exitCode = EVENT_DONE | eventCode |(Fatal?EVENT_ERROR:0);
if((i2c->queuePos < i2c->queueCount) && (i2c->dq[i2c->queuePos].ctrl.mode == 1)) {
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
emptyRxFifo(i2c); // grab last few characters
}
i2c->dev->int_ena.val = 0; // shut down interrupts
i2c->dev->int_clr.val = 0x1FFF;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c->stage = I2C_DONE;
i2c->exitCode = exitCode; //true eventcode
portBASE_TYPE HPTaskAwoken = pdFALSE,xResult;
// try to notify Dispatch we are done,
// else the 50ms time out will recover the APP, just a little slower
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
HPTaskAwoken = pdFALSE;
xResult = xEventGroupSetBitsFromISR(i2c->i2c_event, exitCode, &HPTaskAwoken);
if(xResult == pdPASS) {
if(HPTaskAwoken==pdTRUE) {
portYIELD_FROM_ISR();
// log_e("Yield to Higher");
}
}
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static void IRAM_ATTR i2c_update_error_byte_cnt(i2c_t * i2c)
{
/* i2c_update_error_byte_cnt 07/18/2018
Only called after an error has occurred, so, most of the time this function is never used.
This function obliterates the need to interrupt monitor each byte transferred, at high bitrates
the byte interrupts were overwhelming the OS. Spurious Interrupts were being generated.
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
it updates errorByteCnt, errorQueue.
*/
uint16_t a=0; // start at top of DQ, count how many bytes added to tx fifo, and received from rx_fifo.
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
int16_t bc = 0;
I2C_DATA_QUEUE_t *tdq;
i2c->errorByteCnt = 0;
while( a < i2c->queueCount){ // add up all bytes loaded into fifo's
tdq = &i2c->dq[a];
i2c->errorByteCnt += tdq->ctrl.addrSent;
i2c->errorByteCnt += tdq->position;
a++;
}
// now errorByteCnt contains total bytes moved into and out of FIFO's
// but, there may still be bytes waiting in Fifo's
i2c->errorByteCnt -= i2c->dev->status_reg.tx_fifo_cnt; // waiting to go out;
i2c->errorByteCnt += i2c->dev->status_reg.rx_fifo_cnt; // already received
// now walk thru DQ again, find which byte is 'current'
bc = i2c->errorByteCnt;
i2c->errorQueue = 0;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
while( i2c->errorQueue < i2c->queueCount ){
tdq = &i2c->dq[i2c->errorQueue];
if(bc>0){ // not found yet
if( tdq->ctrl.addrSent >= bc){ // in address
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
bc = -1; // in address
break;
} else {
bc -= tdq->ctrl.addrSent;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if( tdq->length > bc) { // data nak
break;
} else { // count down
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
bc -= tdq->length;
}
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
} else break;
i2c->errorQueue++;
}
i2c->errorByteCnt = bc;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
static void IRAM_ATTR i2c_isr_handler_default(void* arg)
{
i2c_t* p_i2c = (i2c_t*) arg; // recover data
uint32_t activeInt = p_i2c->dev->int_status.val&0x7FF;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(p_i2c->stage==I2C_DONE) { //get Out, can't service, not configured
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
p_i2c->dev->int_ena.val = 0;
p_i2c->dev->int_clr.val = 0x1FFF;
#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_VERBOSE
uint32_t raw = p_i2c->dev->int_raw.val;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
log_w("eject raw=%p, int=%p",raw,activeInt);
#endif
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
return;
}
while (activeInt != 0) { // Ordering of 'if(activeInt)' statements is important, don't change
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO) && (defined ENABLE_I2C_DEBUG_BUFFER)
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(activeInt==(intBuff[intPos[p_i2c->num]][0][p_i2c->num]&0x1fff)) {
intBuff[intPos[p_i2c->num]][0][p_i2c->num] = (((intBuff[intPos[p_i2c->num]][0][p_i2c->num]>>16)+1)<<16)|activeInt;
} else {
intPos[p_i2c->num]++;
intPos[p_i2c->num] %= INTBUFFMAX;
intBuff[intPos[p_i2c->num]][0][p_i2c->num] = (1<<16) | activeInt;
intBuff[intPos[p_i2c->num]][1][p_i2c->num] = 0;
}
intBuff[intPos[p_i2c->num]][2][p_i2c->num] = xTaskGetTickCountFromISR(); // when IRQ fired
#endif
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if (activeInt & I2C_TRANS_START_INT_ST_M) {
if(p_i2c->stage==I2C_STARTUP) {
p_i2c->stage=I2C_RUNNING;
}
activeInt &=~I2C_TRANS_START_INT_ST_M;
p_i2c->dev->int_ena.trans_start = 1; // already enabled? why Again?
p_i2c->dev->int_clr.trans_start = 1; // so that will trigger after next 'END'
}
if (activeInt & I2C_TXFIFO_EMPTY_INT_ST) {//should this be before Trans_start?
fillTxFifo(p_i2c); //fillTxFifo will enable/disable/clear interrupt
activeInt&=~I2C_TXFIFO_EMPTY_INT_ST;
}
if(activeInt & I2C_RXFIFO_FULL_INT_ST) {
emptyRxFifo(p_i2c);
p_i2c->dev->int_clr.rx_fifo_full=1;
p_i2c->dev->int_ena.rx_fifo_full=1; //why?
activeInt &=~I2C_RXFIFO_FULL_INT_ST;
}
if(activeInt & I2C_RXFIFO_OVF_INT_ST) {
emptyRxFifo(p_i2c);
p_i2c->dev->int_clr.rx_fifo_full=1;
p_i2c->dev->int_ena.rx_fifo_full=1; //why?
activeInt &=~I2C_RXFIFO_OVF_INT_ST;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if (activeInt & I2C_ACK_ERR_INT_ST_M) {//fatal error, abort i2c service
if (p_i2c->mode == I2C_MASTER) {
i2c_update_error_byte_cnt(p_i2c); // calc which byte caused ack Error, check if address or data
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if(p_i2c->errorByteCnt < 0 ) { // address
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cIsrExit(p_i2c,EVENT_ERROR_NAK,true);
} else {
i2cIsrExit(p_i2c,EVENT_ERROR_DATA_NAK,true); //data
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
}
return;
}
if (activeInt & I2C_TIME_OUT_INT_ST_M) {
// let Gross timeout occur, Slave may release SCL before the configured timeout expires
// the Statemachine only has a 13.1ms max timout, some Devices >500ms
p_i2c->dev->int_clr.time_out =1;
activeInt &=~I2C_TIME_OUT_INT_ST;
// since a timeout occurred, capture the rxFifo data
emptyRxFifo(p_i2c);
p_i2c->dev->int_clr.rx_fifo_full=1;
p_i2c->dev->int_ena.rx_fifo_full=1; //why?
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
if (activeInt & I2C_TRANS_COMPLETE_INT_ST_M) {
p_i2c->dev->int_clr.trans_complete = 1;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cIsrExit(p_i2c,EVENT_DONE,false);
return; // no more work to do
/*
// how does slave mode act?
if (p_i2c->mode == I2C_SLAVE) { // STOP detected
// empty fifo
// dispatch callback
*/
}
if (activeInt & I2C_ARBITRATION_LOST_INT_ST_M) { //fatal
i2cIsrExit(p_i2c,EVENT_ERROR_ARBITRATION,true);
return; // no more work to do
}
if (activeInt & I2C_SLAVE_TRAN_COMP_INT_ST_M) {
p_i2c->dev->int_clr.slave_tran_comp = 1;
// need to complete this !
}
if (activeInt & I2C_END_DETECT_INT_ST_M) {
p_i2c->dev->int_ena.end_detect = 0;
p_i2c->dev->int_clr.end_detect = 1;
p_i2c->dev->ctr.trans_start=0;
fillCmdQueue(p_i2c,true); // enable interrupts
p_i2c->dev->ctr.trans_start=1; // go for it
activeInt&=~I2C_END_DETECT_INT_ST_M;
}
if(activeInt) { // clear unhandled if possible? What about Disabling interrupt?
p_i2c->dev->int_clr.val = activeInt;
log_e("unknown int=%x",activeInt);
// disable unhandled IRQ,
p_i2c->dev->int_ena.val = p_i2c->dev->int_ena.val & (~activeInt);
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
// activeInt = p_i2c->dev->int_status.val; // start all over if another interrupt happened
// 01AUG2018 if another interrupt happened, the OS will schedule another interrupt
// this is the source of spurious interrupts
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
}
/* Stickbreaker added for ISR 11/2017
functional with Silicon date=0x16042000
*/
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
static i2c_err_t i2cAddQueue(i2c_t * i2c,uint8_t mode, uint16_t i2cDeviceAddr, uint8_t *dataPtr, uint16_t dataLen,bool sendStop, bool dataOnly, EventGroupHandle_t event)
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
{
// need to grab a MUTEX for exclusive Queue,
// what about if ISR is running?
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c==NULL) {
return I2C_ERROR_DEV;
}
I2C_DATA_QUEUE_t dqx;
dqx.data = dataPtr;
dqx.length = dataLen;
dqx.position = 0;
dqx.cmdBytesNeeded = dataLen;
dqx.ctrl.val = 0;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if( dataOnly) {
/* special case to add a queue data only element.
START and devAddr will not be sent, this dq element can have a STOP.
allows multiple buffers to be used for one transaction.
sequence: normal transaction(sendStop==false), [dataonly(sendStop==false)],dataOnly(sendStop==true)
*** Currently only works with WRITE, final byte NAK an READ will cause a fail between dq buffer elements. (in progress 30JUL2018)
*/
dqx.ctrl.startCmdSent = 1; // mark as already sent
dqx.ctrl.addrCmdSent = 1;
} else {
dqx.ctrl.addrReq = ((i2cDeviceAddr&0xFC00)==0x7800)?2:1; // 10bit or 7bit address
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
dqx.ctrl.addr = i2cDeviceAddr;
dqx.ctrl.mode = mode;
dqx.ctrl.stop= sendStop;
dqx.queueEvent = event;
if(event) { // an eventGroup exist, so, initialize it
xEventGroupClearBits(event, EVENT_MASK); // all of them
}
if(i2c->dq!=NULL) { // expand
//log_i("expand");
I2C_DATA_QUEUE_t* tq =(I2C_DATA_QUEUE_t*)realloc(i2c->dq,sizeof(I2C_DATA_QUEUE_t)*(i2c->queueCount +1));
if(tq!=NULL) { // ok
i2c->dq = tq;
memmove(&i2c->dq[i2c->queueCount++],&dqx,sizeof(I2C_DATA_QUEUE_t));
} else { // bad stuff, unable to allocate more memory!
log_e("realloc Failure");
return I2C_ERROR_MEMORY;
}
} else { // first Time
//log_i("new");
i2c->queueCount=0;
i2c->dq =(I2C_DATA_QUEUE_t*)malloc(sizeof(I2C_DATA_QUEUE_t));
if(i2c->dq!=NULL) {
memmove(&i2c->dq[i2c->queueCount++],&dqx,sizeof(I2C_DATA_QUEUE_t));
} else {
log_e("malloc failure");
return I2C_ERROR_MEMORY;
}
}
return I2C_ERROR_OK;
}
i2c_err_t i2cAddQueueWrite(i2c_t * i2c, uint16_t i2cDeviceAddr, uint8_t *dataPtr, uint16_t dataLen,bool sendStop,EventGroupHandle_t event)
{
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
return i2cAddQueue(i2c,0,i2cDeviceAddr,dataPtr,dataLen,sendStop,false,event);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
i2c_err_t i2cAddQueueRead(i2c_t * i2c, uint16_t i2cDeviceAddr, uint8_t *dataPtr, uint16_t dataLen,bool sendStop,EventGroupHandle_t event)
{
//10bit read is kind of weird, first you do a 0byte Write with 10bit
// address, then a ReSTART then a 7bit Read using the the upper 7bit +
// readBit.
// this might cause an internal register pointer problem with 10bit
// devices, But, Don't have any to test against.
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// this is the Industry Standard specification.
if((i2cDeviceAddr &0xFC00)==0x7800) { // ten bit read
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
i2c_err_t err = i2cAddQueue(i2c,0,i2cDeviceAddr,NULL,0,false,false,event);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(err==I2C_ERROR_OK) {
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
return i2cAddQueue(i2c,1,(i2cDeviceAddr>>8),dataPtr,dataLen,sendStop,false,event);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
} else {
return err;
}
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
return i2cAddQueue(i2c,1,i2cDeviceAddr,dataPtr,dataLen,sendStop,false,event);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
i2c_err_t i2cProcQueue(i2c_t * i2c, uint32_t *readCount, uint16_t timeOutMillis)
{
/* do the hard stuff here
install ISR if necessary
setup EventGroup
handle bus busy?
*/
//log_e("procQueue i2c=%p",&i2c);
if(readCount){ //total reads accomplished in all queue elements
*readCount = 0;
}
if(i2c == NULL) {
return I2C_ERROR_DEV;
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if(i2c->debugFlags & 0xff000000) i2cTriggerDumps(i2c,(i2c->debugFlags>>24),"before ProcQueue");
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if (i2c->dev->status_reg.bus_busy) { // return error, let TwoWire() handle resetting the hardware.
/* if multi master then this if should be changed to this 03/12/2018
if(multiMaster){// try to let the bus clear by its self
uint32_t timeOutTick = millis();
while((i2c->dev->status_reg.bus_busy)&&(millis()-timeOutTick<timeOutMillis())){
delay(2); // allow task switch
}
}
if(i2c->dev->status_reg.bus_busy){ // still busy, so die
*/
log_i("Bus busy, reinit");
return I2C_ERROR_BUSY;
}
I2C_MUTEX_LOCK();
/* what about co-existence with SLAVE mode?
Should I check if a slaveMode xfer is in progress and hang
until it completes?
if i2c->stage == I2C_RUNNING or I2C_SLAVE_ACTIVE
*/
i2c->stage = I2C_DONE; // until ready
#if (ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO) && (defined ENABLE_I2C_DEBUG_BUFFER)
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
for(uint16_t i=0; i<INTBUFFMAX; i++) {
intBuff[i][0][i2c->num] = 0;
intBuff[i][1][i2c->num] = 0;
intBuff[i][2][i2c->num] = 0;
}
intPos[i2c->num] = 0;
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
fifoPos = 0;
memset(fifoBuffer,0,FIFOMAX);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
#endif
// EventGroup is used to signal transmission completion from ISR
// not always reliable. Sometimes, the FreeRTOS scheduler is maxed out and refuses request
// if that happens, this call hangs until the timeout period expires, then it continues.
if(!i2c->i2c_event) {
i2c->i2c_event = xEventGroupCreate();
}
if(i2c->i2c_event) {
xEventGroupClearBits(i2c->i2c_event, 0xFF);
} else { // failed to create EventGroup
log_e("eventCreate failed=%p",i2c->i2c_event);
I2C_MUTEX_UNLOCK();
return I2C_ERROR_MEMORY;
}
i2c_err_t reason = I2C_ERROR_OK;
i2c->mode = I2C_MASTER;
i2c->dev->ctr.trans_start=0; // Pause Machine
i2c->dev->timeout.tout = 0xFFFFF; // max 13ms
i2c->dev->int_clr.val = 0x1FFF; // kill them All!
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c->dev->ctr.ms_mode = 1; // master!
i2c->queuePos=0;
i2c->errorByteCnt=0;
i2c->errorQueue = 0;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
uint32_t totalBytes=0; // total number of bytes to be Moved!
// convert address field to required I2C format
while(i2c->queuePos < i2c->queueCount) { // need to push these address modes upstream, to AddQueue
I2C_DATA_QUEUE_t *tdq = &i2c->dq[i2c->queuePos++];
uint16_t taddr=0;
if(tdq->ctrl.addrReq ==2) { // 10bit address
taddr =((tdq->ctrl.addr >> 7) & 0xFE)
|tdq->ctrl.mode;
2018-11-28 00:35:43 +01:00
taddr = (taddr <<8) | (tdq->ctrl.addr&0xFF);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
} else { // 7bit address
taddr = ((tdq->ctrl.addr<<1)&0xFE)
|tdq->ctrl.mode;
}
tdq->ctrl.addr = taddr; // all fixed with R/W bit
totalBytes += tdq->length + tdq->ctrl.addrReq; // total number of byte to be moved!
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
i2c->queuePos=0;
fillCmdQueue(i2c,false); // don't enable Tx/RX irq's
// start adding command[], END irq will keep it full
//Data Fifo will be filled after trans_start is issued
i2c->exitCode=0;
I2C_FIFO_CONF_t f;
f.val = i2c->dev->fifo_conf.val;
f.rx_fifo_rst = 1; // fifo in reset
f.tx_fifo_rst = 1; // fifo in reset
f.nonfifo_en = 0; // use fifo mode
f.nonfifo_tx_thres = 31;
// need to adjust threshold based on I2C clock rate, at 100k, 30 usually works,
// sometimes the emptyRx() actually moves 31 bytes
// it hasn't overflowed yet, I cannot tell if the new byte is added while
// emptyRX() is executing or before?
// let i2cSetFrequency() set thrhds
// f.rx_fifo_full_thrhd = 30; // 30 bytes before INT is issued
// f.tx_fifo_empty_thrhd = 0;
f.fifo_addr_cfg_en = 0; // no directed access
i2c->dev->fifo_conf.val = f.val; // post them all
f.rx_fifo_rst = 0; // release fifo
f.tx_fifo_rst = 0;
i2c->dev->fifo_conf.val = f.val; // post them all
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c->stage = I2C_STARTUP; // everything configured, now start the I2C StateMachine, and
// As soon as interrupts are enabled, the ISR will start handling them.
// it should receive a TXFIFO_EMPTY immediately, even before it
// receives the TRANS_START
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint32_t interruptsEnabled =
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
I2C_ACK_ERR_INT_ENA | // (BIT(10)) Causes Fatal Error Exit
I2C_TRANS_START_INT_ENA | // (BIT(9)) Triggered by trans_start=1, initial,END
I2C_TIME_OUT_INT_ENA | //(BIT(8)) Trigger by SLAVE SCL stretching, NOT an ERROR
I2C_TRANS_COMPLETE_INT_ENA | // (BIT(7)) triggered by STOP, successful exit
I2C_ARBITRATION_LOST_INT_ENA | // (BIT(5)) cause fatal error exit
I2C_SLAVE_TRAN_COMP_INT_ENA | // (BIT(4)) unhandled
I2C_END_DETECT_INT_ENA | // (BIT(3)) refills cmd[] list
I2C_RXFIFO_OVF_INT_ENA | //(BIT(2)) unhandled
I2C_TXFIFO_EMPTY_INT_ENA | // (BIT(1)) triggers fillTxFifo()
I2C_RXFIFO_FULL_INT_ENA; // (BIT(0)) trigger emptyRxFifo()
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
i2c->dev->int_ena.val = interruptsEnabled;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(!i2c->intr_handle) { // create ISR for either peripheral
// log_i("create ISR %d",i2c->num);
uint32_t ret = 0;
uint32_t flags = ESP_INTR_FLAG_IRAM | //< ISR can be called if cache is disabled
ESP_INTR_FLAG_LOWMED | //< Low and medium prio interrupts. These can be handled in C.
ESP_INTR_FLAG_SHARED; //< Reduce resource requirements, Share interrupts
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->num) {
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
ret = esp_intr_alloc_intrstatus(ETS_I2C_EXT1_INTR_SOURCE, flags, (uint32_t)&i2c->dev->int_status.val, interruptsEnabled, &i2c_isr_handler_default,i2c, &i2c->intr_handle);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
} else {
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
ret = esp_intr_alloc_intrstatus(ETS_I2C_EXT0_INTR_SOURCE, flags, (uint32_t)&i2c->dev->int_status.val, interruptsEnabled, &i2c_isr_handler_default,i2c, &i2c->intr_handle);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
if(ret!=ESP_OK) {
log_e("install interrupt handler Failed=%d",ret);
I2C_MUTEX_UNLOCK();
return I2C_ERROR_MEMORY;
}
if( !addApbChangeCallback( i2c, i2cApbChangeCallback)) {
log_e("install apb Callback failed");
I2C_MUTEX_UNLOCK();
return I2C_ERROR_DEV;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
//hang until it completes.
// how many ticks should it take to transfer totalBytes through the I2C hardware,
// add user supplied timeOutMillis to Calculated Value
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
portTickType ticksTimeOut = ((totalBytes*10*1000)/(i2cGetFrequency(i2c))+timeOutMillis)/portTICK_PERIOD_MS;
i2c->dev->ctr.trans_start=1; // go for it
#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_DEBUG
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
portTickType tBefore=xTaskGetTickCount();
#endif
// wait for ISR to complete the transfer, or until timeOut in case of bus fault, hardware problem
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
uint32_t eBits = xEventGroupWaitBits(i2c->i2c_event,EVENT_DONE,pdFALSE,pdTRUE,ticksTimeOut);
#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_DEBUG
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
portTickType tAfter=xTaskGetTickCount();
#endif
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// if xEventGroupSetBitsFromISR() failed, the ISR could have succeeded but never been
// able to mark the success
if(i2c->exitCode!=eBits) { // try to recover from O/S failure
// log_e("EventGroup Failed:%p!=%p",eBits,i2c->exitCode);
eBits=i2c->exitCode;
}
if((eBits&EVENT_ERROR)||(!(eBits & EVENT_DONE))){ // need accurate errorByteCnt for debug
i2c_update_error_byte_cnt(i2c);
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(!(eBits==EVENT_DONE)&&(eBits&~(EVENT_ERROR_NAK|EVENT_ERROR_DATA_NAK|EVENT_ERROR|EVENT_DONE))) { // not only Done, therefore error, exclude ADDR NAK, DATA_NAK
#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_INFO
i2cDumpI2c(i2c);
i2cDumpInts(i2c->num);
#endif
}
if(eBits&EVENT_DONE) { // no gross timeout
switch(i2c->error) {
case I2C_OK :
reason = I2C_ERROR_OK;
break;
case I2C_ERROR :
reason = I2C_ERROR_DEV;
break;
case I2C_ADDR_NAK:
reason = I2C_ERROR_ACK;
break;
case I2C_DATA_NAK:
reason = I2C_ERROR_ACK;
break;
case I2C_ARBITRATION:
reason = I2C_ERROR_BUS;
break;
case I2C_TIMEOUT:
reason = I2C_ERROR_TIMEOUT;
break;
default :
reason = I2C_ERROR_DEV;
}
} else { // GROSS timeout, shutdown ISR , report Timeout
i2c->stage = I2C_DONE;
i2c->dev->int_ena.val =0;
i2c->dev->int_clr.val = 0x1FFF;
i2c_update_error_byte_cnt(i2c);
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if((i2c->errorByteCnt == 0)&&(i2c->errorQueue==0)) { // Bus Busy no bytes Moved
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
reason = I2C_ERROR_BUSY;
eBits = eBits | EVENT_ERROR_BUS_BUSY|EVENT_ERROR|EVENT_DONE;
#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_DEBUG
log_d(" Busy Timeout start=0x%x, end=0x%x, =%d, max=%d error=%d",tBefore,tAfter,(tAfter-tBefore),ticksTimeOut,i2c->error);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cDumpI2c(i2c);
i2cDumpInts(i2c->num);
#endif
} else { // just a timeout, some data made it out or in.
reason = I2C_ERROR_TIMEOUT;
eBits = eBits | EVENT_ERROR_TIMEOUT|EVENT_ERROR|EVENT_DONE;
#if ARDUHAL_LOG_LEVEL >= ARDUHAL_LOG_LEVEL_DEBUG
log_d(" Gross Timeout Dead start=0x%x, end=0x%x, =%d, max=%d error=%d",tBefore,tAfter,(tAfter-tBefore),ticksTimeOut,i2c->error);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cDumpI2c(i2c);
i2cDumpInts(i2c->num);
#endif
}
}
/* offloading all EventGroups to dispatch, EventGroups in ISR is not always successful
11/20/2017
if error, need to trigger all succeeding dataQueue events with the EVENT_ERROR_PREV
07/22/2018
Need to use the queueEvent value to identify transaction blocks, if an error occurs,
all subsequent queue items with the same queueEvent value will receive the EVENT_ERROR_PREV.
But, ProcQue should re-queue queue items that have a different queueEvent value(different transaction)
This change will support multi-thread i2c usage. Use the queueEvent as the transaction event
identifier.
*/
uint32_t b = 0;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
while(b < i2c->queueCount) {
if(i2c->dq[b].ctrl.mode==1 && readCount) {
*readCount += i2c->dq[b].position; // number of data bytes received
}
if(b < i2c->queuePos) { // before any error
if(i2c->dq[b].queueEvent) { // this data queue element has an EventGroup
xEventGroupSetBits(i2c->dq[b].queueEvent,EVENT_DONE);
}
} else if(b == i2c->queuePos) { // last processed queue
if(i2c->dq[b].queueEvent) { // this data queue element has an EventGroup
xEventGroupSetBits(i2c->dq[b].queueEvent,eBits);
}
} else { // never processed queues
if(i2c->dq[b].queueEvent) { // this data queue element has an EventGroup
xEventGroupSetBits(i2c->dq[b].queueEvent,eBits|EVENT_ERROR_PREV);
}
}
b++;
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
if(i2c->debugFlags & 0x00ff0000) i2cTriggerDumps(i2c,(i2c->debugFlags>>16),"after ProcQueue");
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
I2C_MUTEX_UNLOCK();
return reason;
}
static void i2cReleaseISR(i2c_t * i2c)
{
if(i2c->intr_handle) {
esp_intr_free(i2c->intr_handle);
i2c->intr_handle=NULL;
if (!removeApbChangeCallback( i2c, i2cApbChangeCallback)) {
log_e("unable to release apbCallback");
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
}
static bool i2cCheckLineState(int8_t sda, int8_t scl){
if(sda < 0 || scl < 0){
return false;//return false since there is nothing to do
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
// if the bus is not 'clear' try the cycling SCL until SDA goes High or 9 cycles
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
digitalWrite(sda, HIGH);
digitalWrite(scl, HIGH);
pinMode(sda, PULLUP|OPEN_DRAIN|INPUT);
pinMode(scl, PULLUP|OPEN_DRAIN|OUTPUT);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(!digitalRead(sda) || !digitalRead(scl)) { // bus in busy state
log_w("invalid state sda(%d)=%d, scl(%d)=%d", sda, digitalRead(sda), scl, digitalRead(scl));
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
digitalWrite(scl, HIGH);
for(uint8_t a=0; a<9; a++) {
delayMicroseconds(5);
digitalWrite(scl, LOW);
delayMicroseconds(5);
digitalWrite(scl, HIGH);
if(digitalRead(sda)){ // bus recovered
log_d("Recovered after %d Cycles",a+1);
break;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
}
if(!digitalRead(sda) || !digitalRead(scl)) { // bus in busy state
log_e("Bus Invalid State, TwoWire() Can't init sda=%d, scl=%d",digitalRead(sda),digitalRead(scl));
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
return false; // bus is busy
}
return true;
}
2016-10-11 14:11:51 +02:00
i2c_err_t i2cAttachSCL(i2c_t * i2c, int8_t scl)
2016-10-06 13:21:30 +02:00
{
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c == NULL) {
2016-10-11 14:11:51 +02:00
return I2C_ERROR_DEV;
2016-10-11 13:20:02 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
digitalWrite(scl, HIGH);
pinMode(scl, OPEN_DRAIN | PULLUP | INPUT | OUTPUT);
2016-10-06 13:21:30 +02:00
pinMatrixOutAttach(scl, I2C_SCL_IDX(i2c->num), false, false);
pinMatrixInAttach(scl, I2C_SCL_IDX(i2c->num), false);
2016-10-11 14:11:51 +02:00
return I2C_ERROR_OK;
2016-10-06 13:21:30 +02:00
}
2016-10-11 14:11:51 +02:00
i2c_err_t i2cDetachSCL(i2c_t * i2c, int8_t scl)
2016-10-06 13:21:30 +02:00
{
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c == NULL) {
2016-10-11 14:11:51 +02:00
return I2C_ERROR_DEV;
2016-10-11 13:20:02 +02:00
}
2016-10-06 13:21:30 +02:00
pinMatrixOutDetach(scl, false, false);
pinMatrixInDetach(I2C_SCL_IDX(i2c->num), false, false);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
pinMode(scl, INPUT | PULLUP);
2016-10-11 14:11:51 +02:00
return I2C_ERROR_OK;
2016-10-06 13:21:30 +02:00
}
2016-10-11 14:11:51 +02:00
i2c_err_t i2cAttachSDA(i2c_t * i2c, int8_t sda)
2016-10-06 13:21:30 +02:00
{
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c == NULL) {
2016-10-11 14:11:51 +02:00
return I2C_ERROR_DEV;
2016-10-11 13:20:02 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
digitalWrite(sda, HIGH);
pinMode(sda, OPEN_DRAIN | PULLUP | INPUT | OUTPUT );
2016-10-06 13:21:30 +02:00
pinMatrixOutAttach(sda, I2C_SDA_IDX(i2c->num), false, false);
pinMatrixInAttach(sda, I2C_SDA_IDX(i2c->num), false);
2016-10-11 14:11:51 +02:00
return I2C_ERROR_OK;
2016-10-06 13:21:30 +02:00
}
2016-10-11 14:11:51 +02:00
i2c_err_t i2cDetachSDA(i2c_t * i2c, int8_t sda)
2016-10-06 13:21:30 +02:00
{
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c == NULL) {
2016-10-11 14:11:51 +02:00
return I2C_ERROR_DEV;
2016-10-11 13:20:02 +02:00
}
2016-10-06 13:21:30 +02:00
pinMatrixOutDetach(sda, false, false);
pinMatrixInDetach(I2C_SDA_IDX(i2c->num), false, false);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
pinMode(sda, INPUT | PULLUP);
2016-10-11 14:11:51 +02:00
return I2C_ERROR_OK;
2016-10-06 13:21:30 +02:00
}
/*
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
* PUBLIC API
2016-10-06 13:21:30 +02:00
* */
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// 24Nov17 only supports Master Mode
i2c_t * i2cInit(uint8_t i2c_num, int8_t sda, int8_t scl, uint32_t frequency) {
#ifdef ENABLE_I2C_DEBUG_BUFFER
log_v("num=%d sda=%d scl=%d freq=%d",i2c_num, sda, scl, frequency);
#endif
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c_num > 1) {
return NULL;
}
2016-10-11 13:20:02 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c_t * i2c = &_i2c_bus_array[i2c_num];
2016-10-06 13:21:30 +02:00
// pins should be detached, else glitch
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->sda >= 0){
i2cDetachSDA(i2c, i2c->sda);
2016-10-11 13:20:02 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->scl >= 0){
i2cDetachSCL(i2c, i2c->scl);
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c->sda = sda;
i2c->scl = scl;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
#if !CONFIG_DISABLE_HAL_LOCKS
if(i2c->lock == NULL) {
i2c->lock = xSemaphoreCreateRecursiveMutex();
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->lock == NULL) {
return NULL;
}
}
#endif
I2C_MUTEX_LOCK();
2016-10-08 16:32:11 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cReleaseISR(i2c); // ISR exists, release it before disabling hardware
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(frequency == 0) {// don't change existing frequency
frequency = i2cGetFrequency(i2c);
if(frequency == 0) {
frequency = 100000L; // default to 100khz
2016-10-06 13:21:30 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c_num == 0) {
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,DPORT_I2C_EXT0_RST); //reset hardware
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG,DPORT_I2C_EXT0_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,DPORT_I2C_EXT0_RST);// release reset
} else {
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,DPORT_I2C_EXT1_RST); //reset Hardware
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG,DPORT_I2C_EXT1_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,DPORT_I2C_EXT1_RST);
}
i2c->dev->ctr.val = 0;
i2c->dev->ctr.ms_mode = 1;
i2c->dev->ctr.sda_force_out = 1 ;
i2c->dev->ctr.scl_force_out = 1 ;
i2c->dev->ctr.clk_en = 1;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
//the max clock number of receiving a data
i2c->dev->timeout.tout = 400000;//clocks max=1048575
//disable apb nonfifo access
i2c->dev->fifo_conf.nonfifo_en = 0;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c->dev->slave_addr.val = 0;
I2C_MUTEX_UNLOCK();
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cSetFrequency(i2c, frequency); // reconfigure
2016-10-08 16:32:11 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(!i2cCheckLineState(i2c->sda, i2c->scl)){
return NULL;
2016-10-06 13:21:30 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->sda >= 0){
i2cAttachSDA(i2c, i2c->sda);
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->scl >= 0){
i2cAttachSCL(i2c, i2c->scl);
}
return i2c;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
void i2cRelease(i2c_t *i2c) // release all resources, power down peripheral
2016-10-06 13:21:30 +02:00
{
2016-10-11 13:20:02 +02:00
I2C_MUTEX_LOCK();
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->sda >= 0){
i2cDetachSDA(i2c, i2c->sda);
}
if(i2c->scl >= 0){
i2cDetachSCL(i2c, i2c->scl);
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cReleaseISR(i2c);
2016-10-08 16:32:11 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c->i2c_event) {
vEventGroupDelete(i2c->i2c_event);
i2c->i2c_event = NULL;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cFlush(i2c);
2016-10-08 16:32:11 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// reset the I2C hardware and shut off the clock, power it down.
if(i2c->num == 0) {
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,DPORT_I2C_EXT0_RST); //reset hardware
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG,DPORT_I2C_EXT0_CLK_EN); // shutdown hardware
} else {
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,DPORT_I2C_EXT1_RST); //reset Hardware
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG,DPORT_I2C_EXT1_CLK_EN); // shutdown Hardware
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
I2C_MUTEX_UNLOCK();
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c_err_t i2cFlush(i2c_t * i2c)
{
if(i2c==NULL) {
return I2C_ERROR_DEV;
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
i2cTriggerDumps(i2c,i2c->debugFlags & 0xff, "FLUSH");
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
// need to grab a MUTEX for exclusive Queue,
// what out if ISR is running?
i2c_err_t rc=I2C_ERROR_OK;
if(i2c->dq!=NULL) {
// log_i("free");
// what about EventHandle?
free(i2c->dq);
i2c->dq = NULL;
}
i2c->queueCount=0;
i2c->queuePos=0;
// release Mutex
return rc;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c_err_t i2cWrite(i2c_t * i2c, uint16_t address, uint8_t* buff, uint16_t size, bool sendStop, uint16_t timeOutMillis){
if((i2c==NULL)||((size>0)&&(buff==NULL))) { // need to have location to store requested data
return I2C_ERROR_DEV;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c_err_t last_error = i2cAddQueueWrite(i2c, address, buff, size, sendStop, NULL);
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(last_error == I2C_ERROR_OK) { //queued
if(sendStop) { //now actually process the queued commands, including READs
last_error = i2cProcQueue(i2c, NULL, timeOutMillis);
if(last_error == I2C_ERROR_BUSY) { // try to clear the bus
if(i2cInit(i2c->num, i2c->sda, i2c->scl, 0)) {
last_error = i2cProcQueue(i2c, NULL, timeOutMillis);
}
2016-10-08 16:32:11 +02:00
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cFlush(i2c);
} else { // stop not received, so wait for I2C stop,
last_error = I2C_ERROR_CONTINUE;
}
}
return last_error;
}
2016-10-08 16:32:11 +02:00
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c_err_t i2cRead(i2c_t * i2c, uint16_t address, uint8_t* buff, uint16_t size, bool sendStop, uint16_t timeOutMillis, uint32_t *readCount){
if((size == 0)||(i2c == NULL)||(buff==NULL)){ // hardware will hang if no data requested on READ
return I2C_ERROR_DEV;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2c_err_t last_error=i2cAddQueueRead(i2c, address, buff, size, sendStop, NULL);
if(last_error == I2C_ERROR_OK) { //queued
if(sendStop) { //now actually process the queued commands, including READs
last_error = i2cProcQueue(i2c, readCount, timeOutMillis);
if(last_error == I2C_ERROR_BUSY) { // try to clear the bus
if(i2cInit(i2c->num, i2c->sda, i2c->scl, 0)) {
last_error = i2cProcQueue(i2c, readCount, timeOutMillis);
}
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
i2cFlush(i2c);
} else { // stop not received, so wait for I2C stop,
last_error = I2C_ERROR_CONTINUE;
2016-10-06 13:21:30 +02:00
}
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
return last_error;
2016-10-06 13:21:30 +02:00
}
#define MIN_I2C_CLKS 100 // minimum ratio between cpu and i2c Bus clocks
#define INTERRUPT_CYCLE_OVERHEAD 16000 // number of cpu clocks necessary to respond to interrupt
2016-10-11 14:11:51 +02:00
i2c_err_t i2cSetFrequency(i2c_t * i2c, uint32_t clk_speed)
2016-10-06 13:21:30 +02:00
{
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c == NULL) {
2016-10-11 14:11:51 +02:00
return I2C_ERROR_DEV;
2016-10-11 13:20:02 +02:00
}
uint32_t apb = getApbFrequency();
uint32_t period = (apb/clk_speed) / 2;
if((apb/8192 > clk_speed)||(apb/MIN_I2C_CLKS < clk_speed)){ //out of bounds
log_d("i2c freq(%d) out of bounds.vs APB Clock(%d), min=%d, max=%d",clk_speed,apb,(apb/8192),(apb/MIN_I2C_CLKS));
}
if(period < (MIN_I2C_CLKS/2) ){
period = (MIN_I2C_CLKS/2);
clk_speed = apb/(period*2);
log_d("APB Freq too slow, Reducing i2c Freq to %d Hz",clk_speed);
} else if ( period> 4095) {
period = 4095;
clk_speed = apb/(period*2);
log_d("APB Freq too fast, Increasing i2c Freq to %d Hz",clk_speed);
}
#ifdef ENABLE_I2C_DEBUG_BUFFER
log_v("freq=%dHz",clk_speed);
#endif
uint32_t halfPeriod = period/2;
uint32_t quarterPeriod = period/4;
2016-10-11 13:20:02 +02:00
I2C_MUTEX_LOCK();
I2C_FIFO_CONF_t f;
f.val = i2c->dev->fifo_conf.val;
/* Adjust Fifo thresholds based on differential between cpu frequency and bus clock.
The fifo_delta is calculated such that at least INTERRUPT_CYCLE_OVERHEAD cpu clocks are
available when a Fifo interrupt is triggered. This allows enough room in the Fifo so that
interrupt latency does not cause a Fifo overflow/underflow event.
*/
#ifdef ENABLE_I2C_DEBUG_BUFFER
log_v("cpu Freq=%dMhz, i2c Freq=%dHz",getCpuFrequencyMhz(),clk_speed);
#endif
uint32_t fifo_delta = (INTERRUPT_CYCLE_OVERHEAD/((getCpuFrequencyMhz()*1000000 / clk_speed)*10))+1;
if (fifo_delta > 24) fifo_delta=24;
f.rx_fifo_full_thrhd = 32 - fifo_delta;
f.tx_fifo_empty_thrhd = fifo_delta;
i2c->dev->fifo_conf.val = f.val; // set thresholds
#ifdef ENABLE_I2C_DEBUG_BUFFER
log_v("Fifo delta=%d",fifo_delta);
#endif
//the clock num during SCL is low level
i2c->dev->scl_low_period.period = period;
//the clock num during SCL is high level
2016-10-06 13:21:30 +02:00
i2c->dev->scl_high_period.period = period;
//the clock num between the negedge of SDA and negedge of SCL for start mark
i2c->dev->scl_start_hold.time = halfPeriod;
//the clock num between the posedge of SCL and the negedge of SDA for restart mark
i2c->dev->scl_rstart_setup.time = halfPeriod;
2016-10-06 13:21:30 +02:00
//the clock num after the STOP bit's posedge
i2c->dev->scl_stop_hold.time = halfPeriod;
//the clock num between the posedge of SCL and the posedge of SDA
i2c->dev->scl_stop_setup.time = halfPeriod;
2016-10-06 13:21:30 +02:00
//the clock num I2C used to hold the data after the negedge of SCL.
i2c->dev->sda_hold.time = quarterPeriod;
//the clock num I2C used to sample data on SDA after the posedge of SCL
i2c->dev->sda_sample.time = quarterPeriod;
2016-10-11 13:20:02 +02:00
I2C_MUTEX_UNLOCK();
2016-10-11 14:11:51 +02:00
return I2C_ERROR_OK;
2016-10-06 13:21:30 +02:00
}
uint32_t i2cGetFrequency(i2c_t * i2c)
{
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
if(i2c == NULL) {
2016-10-11 13:20:02 +02:00
return 0;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
uint32_t result = 0;
uint32_t old_count = (i2c->dev->scl_low_period.period+i2c->dev->scl_high_period.period);
if(old_count>0) {
result = getApbFrequency() / old_count;
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
} else {
result = 0;
}
return result;
2016-10-06 13:21:30 +02:00
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
uint32_t i2cDebug(i2c_t * i2c, uint32_t setBits, uint32_t resetBits){
if(i2c != NULL) {
i2c->debugFlags = ((i2c->debugFlags | setBits) & ~resetBits);
return i2c->debugFlags;
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
return 0;
}
uint32_t i2cGetStatus(i2c_t * i2c){
if(i2c != NULL){
return i2c->dev->status_reg.val;
}
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
else return 0;
}
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
/* todo
22JUL18
need to add multi-thread capability, use dq.queueEvent as the group marker. When multiple threads
transactions are present in the same queue, and an error occurs, abort all succeeding unserviced transactions
with the same dq.queueEvent value. Succeeding unserviced transactions with different dq.queueEvent values
can be re-queued and processed independently.
Wire ReSTART fix, with others (#1717) * ReSTART fix, Sequencing fix pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Update esp32-hal-i2c.c * Update Wire.cpp * ReSTART, Sequencing pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error. In addition to this required bug fix I propose: * `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure. * `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus. * `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address. * Changes to the HAL layer: ** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently ** added `i2cDebug()` programmatic control of debug buffer output ** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers. ** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points * * Forgot DebugFlags Return @andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
30JUL18 complete data only queue elements, this will allow transfers to use multiple data blocks,
Update IDF to aaf1239 (#1539) * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
*/