arduino-esp32/tools/sdk/esp32s2/ld/esp32s2.rom.api.ld

40 lines
1.8 KiB
Plaintext
Raw Normal View History

/**
* ROM APIs
*/
PROVIDE ( esp_rom_crc32_le = crc32_le );
PROVIDE ( esp_rom_crc16_le = crc16_le );
PROVIDE ( esp_rom_crc8_le = crc8_le );
PROVIDE ( esp_rom_gpio_pad_select_gpio = gpio_pad_select_gpio );
PROVIDE ( esp_rom_gpio_pad_pullup_only = gpio_pad_pullup );
PROVIDE ( esp_rom_gpio_pad_set_drv = gpio_pad_set_drv );
PROVIDE ( esp_rom_gpio_pad_unhold = gpio_pad_unhold );
PROVIDE ( esp_rom_gpio_connect_in_signal = gpio_matrix_in );
PROVIDE ( esp_rom_gpio_connect_out_signal = gpio_matrix_out );
PROVIDE ( esp_rom_efuse_mac_address_crc8 = esp_crc8 );
PROVIDE ( esp_rom_efuse_get_flash_gpio_info = ets_efuse_get_spiconfig );
PROVIDE ( esp_rom_efuse_get_flash_wp_gpio = ets_efuse_get_wp_pad );
PROVIDE ( esp_rom_efuse_is_secure_boot_enabled = ets_efuse_secure_boot_enabled );
PROVIDE ( esp_rom_uart_flush_tx = uart_tx_flush );
PROVIDE ( esp_rom_uart_tx_one_char = uart_tx_one_char );
PROVIDE ( esp_rom_uart_tx_wait_idle = uart_tx_wait_idle );
PROVIDE ( esp_rom_uart_rx_one_char = uart_rx_one_char );
PROVIDE ( esp_rom_uart_rx_string = UartRxString );
PROVIDE ( esp_rom_uart_set_as_console = uart_tx_switch );
PROVIDE ( esp_rom_uart_usb_acm_init = Uart_Init_USB );
PROVIDE ( esp_rom_uart_putc = ets_write_char_uart );
/* wpa_supplicant re-implements the MD5 functions: MD5Init, MD5Update, MD5Final */
/* so here we directly assign the symbols with the ROM API address */
PROVIDE ( esp_rom_md5_init = 0x4000526c );
PROVIDE ( esp_rom_md5_update = 0x4000528c );
PROVIDE ( esp_rom_md5_final = 0x4000530c );
PROVIDE ( esp_rom_printf = ets_printf );
PROVIDE ( esp_rom_delay_us = ets_delay_us );
PROVIDE ( esp_rom_install_uart_printf = ets_install_uart_printf );
PROVIDE ( esp_rom_get_reset_reason = rtc_get_reset_reason );