arduino-esp32/tools/sdk/include/lwip/netif/ppp/pppol2tp.h

202 lines
8.6 KiB
C
Raw Normal View History

2016-10-06 13:21:30 +02:00
/**
* @file
* Network Point to Point Protocol over Layer 2 Tunneling Protocol header file.
*
*/
/*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
*/
#include "lwip/opt.h"
#if PPP_SUPPORT && PPPOL2TP_SUPPORT /* don't build if not configured for use in lwipopts.h */
#ifndef PPPOL2TP_H_
#define PPPOL2TP_H_
#include "ppp.h"
/* Timeout */
#define PPPOL2TP_CONTROL_TIMEOUT (5*1000) /* base for quick timeout calculation */
#define PPPOL2TP_SLOW_RETRY (60*1000) /* persistent retry interval */
#define PPPOL2TP_MAXSCCRQ 4 /* retry SCCRQ four times (quickly) */
#define PPPOL2TP_MAXICRQ 4 /* retry IRCQ four times */
#define PPPOL2TP_MAXICCN 4 /* retry ICCN four times */
/* L2TP header flags */
#define PPPOL2TP_HEADERFLAG_CONTROL 0x8000
#define PPPOL2TP_HEADERFLAG_LENGTH 0x4000
#define PPPOL2TP_HEADERFLAG_SEQUENCE 0x0800
#define PPPOL2TP_HEADERFLAG_OFFSET 0x0200
#define PPPOL2TP_HEADERFLAG_PRIORITY 0x0100
#define PPPOL2TP_HEADERFLAG_VERSION 0x0002
/* Mandatory bits for control: Control, Length, Sequence, Version 2 */
#define PPPOL2TP_HEADERFLAG_CONTROL_MANDATORY (PPPOL2TP_HEADERFLAG_CONTROL|PPPOL2TP_HEADERFLAG_LENGTH|PPPOL2TP_HEADERFLAG_SEQUENCE|PPPOL2TP_HEADERFLAG_VERSION)
/* Forbidden bits for control: Offset, Priority */
#define PPPOL2TP_HEADERFLAG_CONTROL_FORBIDDEN (PPPOL2TP_HEADERFLAG_OFFSET|PPPOL2TP_HEADERFLAG_PRIORITY)
/* Mandatory bits for data: Version 2 */
#define PPPOL2TP_HEADERFLAG_DATA_MANDATORY (PPPOL2TP_HEADERFLAG_VERSION)
/* AVP (Attribute Value Pair) header */
#define PPPOL2TP_AVPHEADERFLAG_MANDATORY 0x8000
#define PPPOL2TP_AVPHEADERFLAG_HIDDEN 0x4000
#define PPPOL2TP_AVPHEADERFLAG_LENGTHMASK 0x03ff
/* -- AVP - Message type */
#define PPPOL2TP_AVPTYPE_MESSAGE 0 /* Message type */
/* Control Connection Management */
#define PPPOL2TP_MESSAGETYPE_SCCRQ 1 /* Start Control Connection Request */
#define PPPOL2TP_MESSAGETYPE_SCCRP 2 /* Start Control Connection Reply */
#define PPPOL2TP_MESSAGETYPE_SCCCN 3 /* Start Control Connection Connected */
#define PPPOL2TP_MESSAGETYPE_STOPCCN 4 /* Stop Control Connection Notification */
#define PPPOL2TP_MESSAGETYPE_HELLO 6 /* Hello */
/* Call Management */
#define PPPOL2TP_MESSAGETYPE_OCRQ 7 /* Outgoing Call Request */
#define PPPOL2TP_MESSAGETYPE_OCRP 8 /* Outgoing Call Reply */
#define PPPOL2TP_MESSAGETYPE_OCCN 9 /* Outgoing Call Connected */
#define PPPOL2TP_MESSAGETYPE_ICRQ 10 /* Incoming Call Request */
#define PPPOL2TP_MESSAGETYPE_ICRP 11 /* Incoming Call Reply */
#define PPPOL2TP_MESSAGETYPE_ICCN 12 /* Incoming Call Connected */
#define PPPOL2TP_MESSAGETYPE_CDN 14 /* Call Disconnect Notify */
/* Error reporting */
#define PPPOL2TP_MESSAGETYPE_WEN 15 /* WAN Error Notify */
/* PPP Session Control */
#define PPPOL2TP_MESSAGETYPE_SLI 16 /* Set Link Info */
/* -- AVP - Result code */
#define PPPOL2TP_AVPTYPE_RESULTCODE 1 /* Result code */
#define PPPOL2TP_RESULTCODE 1 /* General request to clear control connection */
/* -- AVP - Protocol version (!= L2TP Header version) */
#define PPPOL2TP_AVPTYPE_VERSION 2
#define PPPOL2TP_VERSION 0x0100 /* L2TP Protocol version 1, revision 0 */
/* -- AVP - Framing capabilities */
#define PPPOL2TP_AVPTYPE_FRAMINGCAPABILITIES 3 /* Bearer capabilities */
#define PPPOL2TP_FRAMINGCAPABILITIES 0x00000003 /* Async + Sync framing */
/* -- AVP - Bearer capabilities */
#define PPPOL2TP_AVPTYPE_BEARERCAPABILITIES 4 /* Bearer capabilities */
#define PPPOL2TP_BEARERCAPABILITIES 0x00000003 /* Analog + Digital Access */
/* -- AVP - Tie breaker */
#define PPPOL2TP_AVPTYPE_TIEBREAKER 5
/* -- AVP - Host name */
#define PPPOL2TP_AVPTYPE_HOSTNAME 7 /* Host name */
#define PPPOL2TP_HOSTNAME "lwIP" /* FIXME: make it configurable */
/* -- AVP - Vendor name */
#define PPPOL2TP_AVPTYPE_VENDORNAME 8 /* Vendor name */
#define PPPOL2TP_VENDORNAME "lwIP" /* FIXME: make it configurable */
/* -- AVP - Assign tunnel ID */
#define PPPOL2TP_AVPTYPE_TUNNELID 9 /* Assign Tunnel ID */
/* -- AVP - Receive window size */
#define PPPOL2TP_AVPTYPE_RECEIVEWINDOWSIZE 10 /* Receive window size */
#define PPPOL2TP_RECEIVEWINDOWSIZE 8 /* FIXME: make it configurable */
/* -- AVP - Challenge */
#define PPPOL2TP_AVPTYPE_CHALLENGE 11 /* Challenge */
/* -- AVP - Cause code */
#define PPPOL2TP_AVPTYPE_CAUSECODE 12 /* Cause code*/
/* -- AVP - Challenge response */
#define PPPOL2TP_AVPTYPE_CHALLENGERESPONSE 13 /* Challenge response */
#define PPPOL2TP_AVPTYPE_CHALLENGERESPONSE_SIZE 16
/* -- AVP - Assign session ID */
#define PPPOL2TP_AVPTYPE_SESSIONID 14 /* Assign Session ID */
/* -- AVP - Call serial number */
#define PPPOL2TP_AVPTYPE_CALLSERIALNUMBER 15 /* Call Serial Number */
/* -- AVP - Framing type */
#define PPPOL2TP_AVPTYPE_FRAMINGTYPE 19 /* Framing Type */
#define PPPOL2TP_FRAMINGTYPE 0x00000001 /* Sync framing */
/* -- AVP - TX Connect Speed */
#define PPPOL2TP_AVPTYPE_TXCONNECTSPEED 24 /* TX Connect Speed */
#define PPPOL2TP_TXCONNECTSPEED 100000000 /* Connect speed: 100 Mbits/s */
/* L2TP Session state */
#define PPPOL2TP_STATE_INITIAL 0
#define PPPOL2TP_STATE_SCCRQ_SENT 1
#define PPPOL2TP_STATE_ICRQ_SENT 2
#define PPPOL2TP_STATE_ICCN_SENT 3
#define PPPOL2TP_STATE_DATA 4
#define PPPOL2TP_OUTPUT_DATA_HEADER_LEN 6 /* Our data header len */
/*
* PPPoL2TP interface control block.
*/
typedef struct pppol2tp_pcb_s pppol2tp_pcb;
struct pppol2tp_pcb_s {
ppp_pcb *ppp; /* PPP PCB */
u8_t phase; /* L2TP phase */
struct udp_pcb *udp; /* UDP L2TP Socket */
struct netif *netif; /* Output interface, used as a default route */
ip_addr_t remote_ip; /* LNS IP Address */
u16_t remote_port; /* LNS port */
#if PPPOL2TP_AUTH_SUPPORT
const u8_t *secret; /* Secret string */
u8_t secret_len; /* Secret string length */
u8_t secret_rv[16]; /* Random vector */
u8_t challenge_hash[16]; /* Challenge response */
u8_t send_challenge; /* Boolean whether the next sent packet should contains a challenge response */
#endif /* PPPOL2TP_AUTH_SUPPORT */
u16_t tunnel_port; /* Tunnel port */
u16_t our_ns; /* NS to peer */
u16_t peer_nr; /* NR from peer */
u16_t peer_ns; /* NS from peer */
u16_t source_tunnel_id; /* Tunnel ID assigned by peer */
u16_t remote_tunnel_id; /* Tunnel ID assigned to peer */
u16_t source_session_id; /* Session ID assigned by peer */
u16_t remote_session_id; /* Session ID assigned to peer */
u8_t sccrq_retried; /* number of SCCRQ retries already done */
u8_t icrq_retried; /* number of ICRQ retries already done */
u8_t iccn_retried; /* number of ICCN retries already done */
};
/* Create a new L2TP session. */
ppp_pcb *pppol2tp_create(struct netif *pppif,
struct netif *netif, ip_addr_t *ipaddr, u16_t port,
const u8_t *secret, u8_t secret_len,
ppp_link_status_cb_fn link_status_cb, void *ctx_cb);
#endif /* PPPOL2TP_H_ */
#endif /* PPP_SUPPORT && PPPOL2TP_SUPPORT */