arduino-esp32/tools/sdk/esp32/sdkconfig

1794 lines
51 KiB
Plaintext
Raw Normal View History

#
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
#
CONFIG_IDF_CMAKE=y
CONFIG_IDF_TARGET_ARCH_XTENSA=y
CONFIG_IDF_TARGET="esp32"
CONFIG_IDF_TARGET_ESP32=y
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
#
# SDK tool configuration
#
CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-"
# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
# end of SDK tool configuration
#
# Build type
#
CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
CONFIG_APP_BUILD_GENERATE_BINARIES=y
CONFIG_APP_BUILD_BOOTLOADER=y
CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
# end of Build type
#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
# end of Application manager
#
# Bootloader config
#
CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
CONFIG_BOOTLOADER_LOG_LEVEL=0
# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
# end of Bootloader config
#
# Security features
#
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_BOOT is not set
# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
# end of Security features
#
# Serial flasher config
#
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
# CONFIG_ESPTOOLPY_NO_STUB is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE="dio"
# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
# end of Serial flasher config
#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y
# end of Partition Table
#
# ESP RainMaker Config
#
CONFIG_ESP_RMAKER_ASSISTED_CLAIM=y
CONFIG_ESP_RMAKER_MQTT_HOST="a1p72mufdu6064-ats.iot.us-east-1.amazonaws.com"
CONFIG_ESP_RMAKER_TASK_STACK=4096
CONFIG_ESP_RMAKER_TASK_PRIORITY=5
CONFIG_ESP_RMAKER_MAX_NODE_CONFIG_SIZE=2048
CONFIG_ESP_RMAKER_MAX_PARAM_DATA_SIZE=1024
CONFIG_ESP_RMAKER_FACTORY_PARTITION_NAME="fctry"
# CONFIG_RMAKER_MQTT_PERSISTENT_SESSION is not set
CONFIG_ESP_RMAKER_MQTT_PORT_443=y
# CONFIG_ESP_RMAKER_MQTT_PORT_8883 is not set
CONFIG_ESP_RMAKER_MQTT_PORT=1
CONFIG_ESP_RMAKER_DEF_TIMEZONE=""
CONFIG_ESP_RMAKER_SNTP_SERVER_NAME="pool.ntp.org"
# CONFIG_ESP_RMAKER_DISABLE_USER_MAPPING_PROV is not set
CONFIG_ESP_RMAKER_CONSOLE_UART_NUM_0=y
# CONFIG_ESP_RMAKER_CONSOLE_UART_NUM_1 is not set
CONFIG_ESP_RMAKER_CONSOLE_UART_NUM=0
#
# ESP RainMaker OTA Config
#
CONFIG_ESP_RMAKER_OTA_AUTOFETCH=y
CONFIG_ESP_RMAKER_OTA_AUTOFETCH_PERIOD=0
# CONFIG_ESP_RMAKER_SKIP_COMMON_NAME_CHECK is not set
# CONFIG_ESP_RMAKER_SKIP_VERSION_CHECK is not set
# CONFIG_ESP_RMAKER_SKIP_PROJECT_NAME_CHECK is not set
# end of ESP RainMaker OTA Config
#
# ESP RainMaker Scheduling
#
CONFIG_ESP_RMAKER_SCHEDULING_MAX_SCHEDULES=5
# end of ESP RainMaker Scheduling
# end of ESP RainMaker Config
#
# Arduino Configuration
#
CONFIG_ENABLE_ARDUINO_DEPENDS=y
CONFIG_AUTOSTART_ARDUINO=y
# CONFIG_ARDUINO_RUN_CORE0 is not set
CONFIG_ARDUINO_RUN_CORE1=y
# CONFIG_ARDUINO_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_RUNNING_CORE=1
CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
# CONFIG_ARDUINO_EVENT_RUN_CORE0 is not set
CONFIG_ARDUINO_EVENT_RUN_CORE1=y
# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
# CONFIG_ARDUINO_UDP_RUN_CORE0 is not set
CONFIG_ARDUINO_UDP_RUN_CORE1=y
# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
CONFIG_ARDUINO_UDP_RUNNING_CORE=1
# CONFIG_ARDUINO_ISR_IRAM is not set
# CONFIG_DISABLE_HAL_LOCKS is not set
#
# Debug Log Configuration
#
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_NONE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR=y
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_WARN is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=1
# CONFIG_ARDUHAL_LOG_COLORS is not set
CONFIG_ARDUHAL_ESP_LOG=y
# end of Debug Log Configuration
CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT=y
# CONFIG_ARDUHAL_PARTITION_SCHEME_MINIMAL is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_HUGE_APP is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS is not set
CONFIG_ARDUHAL_PARTITION_SCHEME="default"
# CONFIG_AUTOCONNECT_WIFI is not set
# CONFIG_ARDUINO_SELECTIVE_COMPILATION is not set
# end of Arduino Configuration
#
# Arduino TinyUSB
#
# end of Arduino TinyUSB
#
# Compiler options
#
# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
CONFIG_COMPILER_OPTIMIZATION_PERF=y
# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
CONFIG_COMPILER_HIDE_PATHS_MACROS=y
CONFIG_COMPILER_CXX_EXCEPTIONS=y
CONFIG_COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
# CONFIG_COMPILER_CXX_RTTI is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_NONE is not set
CONFIG_COMPILER_STACK_CHECK_MODE_NORM=y
# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
CONFIG_COMPILER_STACK_CHECK=y
CONFIG_COMPILER_WARN_WRITE_STRINGS=y
# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
# CONFIG_COMPILER_DUMP_RTL_FILES is not set
# end of Compiler options
#
# Component config
#
#
# Application Level Tracing
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# CONFIG_APPTRACE_DEST_JTAG is not set
CONFIG_APPTRACE_DEST_NONE=y
CONFIG_APPTRACE_LOCK_ENABLE=y
# end of Application Level Tracing
#
# ESP-ASIO
#
# CONFIG_ASIO_SSL_SUPPORT is not set
# end of ESP-ASIO
#
# Bluetooth
#
CONFIG_BT_ENABLED=y
CONFIG_BT_CTRL_ESP32=y
#
# Bluetooth controller(ESP32 Dual Mode Bluetooth)
#
# CONFIG_BTDM_CTRL_MODE_BLE_ONLY is not set
# CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY is not set
CONFIG_BTDM_CTRL_MODE_BTDM=y
CONFIG_BTDM_CTRL_BLE_MAX_CONN=3
CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN=2
CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN=0
# CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_HCI is not set
CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_PCM=y
CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=1
CONFIG_BTDM_CTRL_PCM_ROLE_EDGE_CONFIG=y
CONFIG_BTDM_CTRL_PCM_ROLE_MASTER=y
# CONFIG_BTDM_CTRL_PCM_ROLE_SLAVE is not set
CONFIG_BTDM_CTRL_PCM_POLAR_FALLING_EDGE=y
# CONFIG_BTDM_CTRL_PCM_POLAR_RISING_EDGE is not set
CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
# CONFIG_BTDM_CTRL_AUTO_LATENCY is not set
CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT=y
CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF=y
CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=3
CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=2
CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CTRL_PINNED_TO_CORE_0=y
# CONFIG_BTDM_CTRL_PINNED_TO_CORE_1 is not set
CONFIG_BTDM_CTRL_PINNED_TO_CORE=0
CONFIG_BTDM_CTRL_HCI_MODE_VHCI=y
# CONFIG_BTDM_CTRL_HCI_MODE_UART_H4 is not set
#
# MODEM SLEEP Options
#
CONFIG_BTDM_CTRL_MODEM_SLEEP=y
CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_ORIG=y
# CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_EVED is not set
CONFIG_BTDM_CTRL_LPCLK_SEL_MAIN_XTAL=y
# end of MODEM SLEEP Options
CONFIG_BTDM_BLE_DEFAULT_SCA_250PPM=y
CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
CONFIG_BTDM_BLE_SCAN_DUPL=y
CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE=y
# CONFIG_BTDM_SCAN_DUPL_TYPE_DATA is not set
# CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE is not set
CONFIG_BTDM_SCAN_DUPL_TYPE=0
CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=20
# CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN is not set
CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
CONFIG_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
# end of Bluetooth controller(ESP32 Dual Mode Bluetooth)
CONFIG_BT_CTRL_MODE_EFF=1
CONFIG_BT_CTRL_BLE_MAX_ACT=10
CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=10
CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
CONFIG_BT_CTRL_PINNED_TO_CORE=0
CONFIG_BT_CTRL_HCI_TL=1
CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
CONFIG_BT_CTRL_HW_CCA_EFF=0
CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=0
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
#
# MODEM SLEEP Options
#
# end of MODEM SLEEP Options
CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
CONFIG_BT_CTRL_HCI_TL_EFF=1
#
# MODEM SLEEP Options
#
# end of MODEM SLEEP Options
CONFIG_BT_BLUEDROID_ENABLED=y
# CONFIG_BT_NIMBLE_ENABLED is not set
# CONFIG_BT_CONTROLLER_ONLY is not set
#
# Bluedroid Options
#
CONFIG_BT_BTC_TASK_STACK_SIZE=8192
CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0=y
# CONFIG_BT_BLUEDROID_PINNED_TO_CORE_1 is not set
CONFIG_BT_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BT_BTU_TASK_STACK_SIZE=4096
# CONFIG_BT_BLUEDROID_MEM_DEBUG is not set
CONFIG_BT_CLASSIC_ENABLED=y
CONFIG_BT_A2DP_ENABLE=y
CONFIG_BT_SPP_ENABLED=y
CONFIG_BT_HFP_ENABLE=y
CONFIG_BT_HFP_CLIENT_ENABLE=y
# CONFIG_BT_HFP_AG_ENABLE is not set
CONFIG_BT_HFP_AUDIO_DATA_PATH_PCM=y
# CONFIG_BT_HFP_AUDIO_DATA_PATH_HCI is not set
# CONFIG_BT_HID_HOST_ENABLED is not set
CONFIG_BT_SSP_ENABLED=y
CONFIG_BT_BLE_ENABLED=y
CONFIG_BT_GATTS_ENABLE=y
# CONFIG_BT_GATTS_PPCP_CHAR_GAP is not set
# CONFIG_BT_BLE_BLUFI_ENABLE is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_BT_GATT_MAX_SR_PROFILES=8
# CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO=y
CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE=0
CONFIG_BT_GATTC_ENABLE=y
# CONFIG_BT_GATTC_CACHE_NVS_FLASH is not set
CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
CONFIG_BT_BLE_SMP_ENABLE=y
# CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
CONFIG_BT_STACK_NO_LOG=y
CONFIG_BT_ACL_CONNECTIONS=4
CONFIG_BT_MULTI_CONNECTION_ENBALE=y
CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST=y
CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY=y
# CONFIG_BT_BLE_HOST_QUEUE_CONG_CHECK is not set
CONFIG_BT_SMP_ENABLE=y
# CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN is not set
CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
# CONFIG_BT_BLE_RPA_SUPPORTED is not set
CONFIG_BT_RESERVE_DRAM=0xdb5c
# end of Bluedroid Options
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_BT_NIMBLE_USE_ESP_TIMER=y
# end of Bluetooth
# CONFIG_BLE_MESH is not set
#
# CoAP Configuration
#
CONFIG_COAP_MBEDTLS_PSK=y
# CONFIG_COAP_MBEDTLS_PKI is not set
# CONFIG_COAP_MBEDTLS_DEBUG is not set
CONFIG_COAP_LOG_DEFAULT_LEVEL=0
# end of CoAP Configuration
#
# Driver configurations
#
#
# ADC configuration
#
# CONFIG_ADC_FORCE_XPD_FSM is not set
CONFIG_ADC_DISABLE_DAC=y
# end of ADC configuration
#
# SPI configuration
#
# CONFIG_SPI_MASTER_IN_IRAM is not set
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
# CONFIG_SPI_SLAVE_IN_IRAM is not set
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
# end of SPI configuration
#
# TWAI configuration
#
# CONFIG_TWAI_ISR_IN_IRAM is not set
# CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC is not set
# CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST is not set
# CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID is not set
# CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT is not set
# end of TWAI configuration
#
# UART configuration
#
# CONFIG_UART_ISR_IN_IRAM is not set
# end of UART configuration
#
# RTCIO configuration
#
# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set
# end of RTCIO configuration
#
# GPIO Configuration
#
# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
# end of GPIO Configuration
# end of Driver configurations
#
# eFuse Bit Manager
#
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
CONFIG_EFUSE_MAX_BLK_LEN=192
# end of eFuse Bit Manager
#
# ESP-TLS
#
CONFIG_ESP_TLS_USING_MBEDTLS=y
# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
# CONFIG_ESP_TLS_SERVER is not set
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE is not set
# end of ESP-TLS
#
# ESP32-specific
#
CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y
CONFIG_ESP32_REV_MIN_0=y
# CONFIG_ESP32_REV_MIN_1 is not set
# CONFIG_ESP32_REV_MIN_2 is not set
# CONFIG_ESP32_REV_MIN_3 is not set
CONFIG_ESP32_REV_MIN=0
CONFIG_ESP32_DPORT_WORKAROUND=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
CONFIG_ESP32_SPIRAM_SUPPORT=y
#
# SPI RAM config
#
CONFIG_SPIRAM_TYPE_AUTO=y
# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
CONFIG_SPIRAM_SIZE=-1
CONFIG_SPIRAM_SPEED_40M=y
CONFIG_SPIRAM=y
# CONFIG_SPIRAM_BOOT_INIT is not set
# CONFIG_SPIRAM_USE_MEMMAP is not set
# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
CONFIG_SPIRAM_USE_MALLOC=y
CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
# CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP is not set
CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
CONFIG_SPIRAM_CACHE_WORKAROUND=y
#
# SPIRAM cache workaround debugging
#
CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_MEMW=y
# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_DUPLDST is not set
# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_NOPS is not set
# end of SPIRAM cache workaround debugging
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#
# SPIRAM workaround libraries placement
#
CONFIG_SPIRAM_CACHE_LIBJMP_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBMATH_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBNUMPARSER_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBIO_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBMEM_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBRAND_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBENV_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM=y
# end of SPIRAM workaround libraries placement
CONFIG_SPIRAM_BANKSWITCH_ENABLE=y
CONFIG_SPIRAM_BANKSWITCH_RESERVE=8
# CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY is not set
#
# PSRAM clock and cs IO for ESP32-DOWD
#
CONFIG_D0WD_PSRAM_CLK_IO=17
CONFIG_D0WD_PSRAM_CS_IO=16
# end of PSRAM clock and cs IO for ESP32-DOWD
#
# PSRAM clock and cs IO for ESP32-D2WD
#
CONFIG_D2WD_PSRAM_CLK_IO=9
CONFIG_D2WD_PSRAM_CS_IO=10
# end of PSRAM clock and cs IO for ESP32-D2WD
#
# PSRAM clock and cs IO for ESP32-PICO
#
CONFIG_PICO_PSRAM_CS_IO=10
# end of PSRAM clock and cs IO for ESP32-PICO
# CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN is not set
CONFIG_SPIRAM_SPIWP_SD3_PIN=7
# CONFIG_SPIRAM_2T_MODE is not set
# end of SPI RAM config
# CONFIG_ESP32_TRAX is not set
CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
CONFIG_ESP32_ULP_COPROC_ENABLED=y
CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=512
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_ESP32_BROWNOUT_DET=y
CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_ESP32_BROWNOUT_DET_LVL=0
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y
# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
# CONFIG_ESP32_XTAL_FREQ_40 is not set
# CONFIG_ESP32_XTAL_FREQ_26 is not set
CONFIG_ESP32_XTAL_FREQ_AUTO=y
CONFIG_ESP32_XTAL_FREQ=0
# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set
CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5
# end of ESP32-specific
#
# ADC-Calibration
#
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y
# end of ADC-Calibration
#
# Common ESP-related
#
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
# end of Common ESP-related
#
# Ethernet
#
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_ESP32_EMAC=y
CONFIG_ETH_PHY_INTERFACE_RMII=y
# CONFIG_ETH_PHY_INTERFACE_MII is not set
CONFIG_ETH_RMII_CLK_INPUT=y
# CONFIG_ETH_RMII_CLK_OUTPUT is not set
CONFIG_ETH_RMII_CLK_IN_GPIO=0
CONFIG_ETH_DMA_BUFFER_SIZE=512
CONFIG_ETH_DMA_RX_BUFFER_NUM=10
CONFIG_ETH_DMA_TX_BUFFER_NUM=10
CONFIG_ETH_USE_SPI_ETHERNET=y
CONFIG_ETH_SPI_ETHERNET_DM9051=y
CONFIG_ETH_SPI_ETHERNET_W5500=y
# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
# CONFIG_ETH_USE_OPENETH is not set
# end of Ethernet
#
# Event Loop Library
#
# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
CONFIG_ESP_EVENT_POST_FROM_ISR=y
CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
# end of Event Loop Library
#
# GDB Stub
#
# end of GDB Stub
#
# ESP HTTP client
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
# end of ESP HTTP client
#
# HTTP Server
#
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_HTTPD_LOG_PURGE_DATA is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_HTTPD_WS_SUPPORT=y
# end of HTTP Server
#
# ESP HTTPS OTA
#
# CONFIG_OTA_ALLOW_HTTP is not set
# end of ESP HTTPS OTA
#
# ESP HTTPS server
#
# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
# end of ESP HTTPS server
#
# Hardware Settings
#
#
# MAC Config
#
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
# end of MAC Config
#
# Sleep Config
#
# end of Sleep Config
# end of Hardware Settings
#
# LCD and Touch Panel
#
# end of LCD and Touch Panel
#
# ESP NETIF Adapter
#
CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
CONFIG_ESP_NETIF_TCPIP_LWIP=y
# CONFIG_ESP_NETIF_LOOPBACK is not set
CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
# end of ESP NETIF Adapter
#
# PHY
#
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
# end of PHY
#
# Power Management
#
# CONFIG_PM_ENABLE is not set
# end of Power Management
#
# ESP System Settings
#
# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
#
# Memory protection
#
# end of Memory protection
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2048
CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096
CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_NONE is not set
CONFIG_ESP_CONSOLE_UART=y
CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
CONFIG_ESP_CONSOLE_UART_NUM=0
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_ESP_INT_WDT=y
CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
CONFIG_ESP_INT_WDT_CHECK_CPU1=y
CONFIG_ESP_TASK_WDT=y
CONFIG_ESP_TASK_WDT_PANIC=y
CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
# CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
# end of ESP System Settings
#
# High resolution timer (esp_timer)
#
# CONFIG_ESP_TIMER_PROFILING is not set
CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
CONFIG_ESP_TIMER_TASK_STACK_SIZE=4096
CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
# end of High resolution timer (esp_timer)
#
# Wi-Fi
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_ESP32_WIFI_ENABLED=y
CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=8
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=8
CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=16
# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
# CONFIG_ESP32_WIFI_IRAM_OPT is not set
# CONFIG_ESP32_WIFI_RX_IRAM_OPT is not set
# CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE is not set
# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
# end of Wi-Fi
#
# Core dump
#
# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
# end of Core dump
#
# FAT Filesystem support
#
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
# CONFIG_FATFS_CODEPAGE_437 is not set
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
CONFIG_FATFS_CODEPAGE_850=y
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=850
# CONFIG_FATFS_LFN_NONE is not set
# CONFIG_FATFS_LFN_HEAP is not set
CONFIG_FATFS_LFN_STACK=y
CONFIG_FATFS_MAX_LFN=255
CONFIG_FATFS_API_ENCODING_ANSI_OEM=y
# CONFIG_FATFS_API_ENCODING_UTF_16 is not set
# CONFIG_FATFS_API_ENCODING_UTF_8 is not set
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y
# CONFIG_FATFS_USE_FASTSEEK is not set
# end of FAT Filesystem support
#
# Modbus configuration
#
CONFIG_FMB_COMM_MODE_TCP_EN=y
CONFIG_FMB_TCP_PORT_DEFAULT=502
CONFIG_FMB_TCP_PORT_MAX_CONN=5
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
CONFIG_FMB_COMM_MODE_RTU_EN=y
CONFIG_FMB_COMM_MODE_ASCII_EN=y
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
CONFIG_FMB_QUEUE_LENGTH=20
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
# CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT is not set
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
CONFIG_FMB_TIMER_PORT_ENABLED=y
CONFIG_FMB_TIMER_GROUP=0
CONFIG_FMB_TIMER_INDEX=0
# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
# end of Modbus configuration
#
# FreeRTOS
#
# CONFIG_FREERTOS_UNICORE is not set
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_HZ=1000
# CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
# CONFIG_FREERTOS_ASSERT_DISABLE is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1024
CONFIG_FREERTOS_ISR_STACKSIZE=1536
# CONFIG_FREERTOS_LEGACY_HOOKS is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
CONFIG_FREERTOS_DEBUG_OCDAWARE=y
# CONFIG_FREERTOS_FPU_IN_ISR is not set
# end of FreeRTOS
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#
# Hardware Abstraction Layer (HAL) and Low Level (LL)
#
CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
# CONFIG_HAL_ASSERTION_DISABLE is not set
# CONFIG_HAL_ASSERTION_SILIENT is not set
# CONFIG_HAL_ASSERTION_ENABLE is not set
CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
#
# Heap memory debugging
#
# CONFIG_HEAP_POISONING_DISABLED is not set
CONFIG_HEAP_POISONING_LIGHT=y
# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
CONFIG_HEAP_TRACING_OFF=y
# CONFIG_HEAP_TRACING_STANDALONE is not set
# CONFIG_HEAP_TRACING_TOHOST is not set
# CONFIG_HEAP_TASK_TRACKING is not set
# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
# end of Heap memory debugging
#
# jsmn
#
# CONFIG_JSMN_PARENT_LINKS is not set
# CONFIG_JSMN_STRICT is not set
# end of jsmn
#
# libsodium
#
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
# end of libsodium
#
# Log output
#
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=1
CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
CONFIG_LOG_MAXIMUM_LEVEL=1
# CONFIG_LOG_COLORS is not set
CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
# end of Log output
#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
# CONFIG_LWIP_NETIF_API is not set
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
# CONFIG_LWIP_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_TIMERS_ONDEMAND=y
CONFIG_LWIP_MAX_SOCKETS=10
# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
# CONFIG_LWIP_SO_LINGER is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=y
# CONFIG_LWIP_NETBUF_RECVINFO is not set
CONFIG_LWIP_IP4_FRAG=y
CONFIG_LWIP_IP6_FRAG=y
# CONFIG_LWIP_IP4_REASSEMBLY is not set
# CONFIG_LWIP_IP6_REASSEMBLY is not set
# CONFIG_LWIP_IP_FORWARD is not set
# CONFIG_LWIP_STATS is not set
CONFIG_LWIP_ETHARP_TRUST_IP_MAC=y
CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
CONFIG_LWIP_GARP_TMR_INTERVAL=60
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
# CONFIG_LWIP_DHCP_DOES_ARP_CHECK is not set
# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
CONFIG_LWIP_DHCP_RESTORE_LAST_IP=y
#
# DHCP server
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_LWIP_DHCPS=y
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# end of DHCP server
# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_IPV6=y
# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
# CONFIG_LWIP_IPV6_FORWARD is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_LWIP_IPV6_RDNSS_MAX_DNS_SERVERS=0
# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
CONFIG_LWIP_TCP_MAXRTX=12
CONFIG_LWIP_TCP_SYNMAXRTX=6
CONFIG_LWIP_TCP_MSS=1436
CONFIG_LWIP_TCP_TMR_INTERVAL=250
CONFIG_LWIP_TCP_MSL=60000
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
CONFIG_LWIP_TCP_WND_DEFAULT=5744
CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
# CONFIG_LWIP_TCP_SACK_OUT is not set
# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_LWIP_TCP_OVERSIZE_MSS=y
# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_TCP_RTO_TIME=3000
# end of TCP
#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
# end of UDP
#
# Checksums
#
# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
# end of Checksums
CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=2560
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0=y
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x0
CONFIG_LWIP_PPP_SUPPORT=y
CONFIG_LWIP_PPP_ENABLE_IPV6=y
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
# CONFIG_LWIP_PPP_NOTIFY_PHASE_SUPPORT is not set
CONFIG_LWIP_PPP_PAP_SUPPORT=y
CONFIG_LWIP_PPP_CHAP_SUPPORT=y
CONFIG_LWIP_PPP_MSCHAP_SUPPORT=y
CONFIG_LWIP_PPP_MPPE_SUPPORT=y
# CONFIG_LWIP_ENABLE_LCP_ECHO is not set
# CONFIG_LWIP_PPP_DEBUG_ON is not set
# CONFIG_LWIP_SLIP_SUPPORT is not set
#
# ICMP
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_LWIP_ICMP=y
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
# end of ICMP
#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16
# end of LWIP RAW API
#
# SNTP
#
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
# end of SNTP
CONFIG_LWIP_ESP_LWIP_ASSERT=y
#
# Hooks
#
# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
# end of Hooks
# CONFIG_LWIP_DEBUG is not set
# end of LWIP
#
# mbedTLS
#
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
# CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC is not set
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
# CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN is not set
# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
# CONFIG_MBEDTLS_DEBUG is not set
#
# Certificate Bundle
#
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
# end of Certificate Bundle
# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
# CONFIG_MBEDTLS_CMAC_C is not set
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_HARDWARE_MPI=y
# CONFIG_MBEDTLS_HARDWARE_SHA is not set
CONFIG_MBEDTLS_ROM_MD5=y
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
CONFIG_MBEDTLS_SHA512_C=y
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
# CONFIG_MBEDTLS_TLS_DISABLED is not set
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y
#
# TLS Key Exchange Methods
#
CONFIG_MBEDTLS_PSK_MODES=y
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
# end of TLS Key Exchange Methods
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
CONFIG_MBEDTLS_SSL_PROTO_DTLS=y
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
# CONFIG_MBEDTLS_CAMELLIA_C is not set
# CONFIG_MBEDTLS_DES_C is not set
CONFIG_MBEDTLS_RC4_DISABLED=y
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
# CONFIG_MBEDTLS_RC4_ENABLED is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
# CONFIG_MBEDTLS_NIST_KW_C is not set
# end of Symmetric Ciphers
# CONFIG_MBEDTLS_RIPEMD160_C is not set
#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
# end of Certificates
CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
# CONFIG_MBEDTLS_ECJPAKE_C is not set
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
# CONFIG_MBEDTLS_POLY1305_C is not set
# CONFIG_MBEDTLS_CHACHA20_C is not set
# CONFIG_MBEDTLS_HKDF_C is not set
# CONFIG_MBEDTLS_THREADING_C is not set
# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
# CONFIG_MBEDTLS_SECURITY_RISKS is not set
# end of mbedTLS
#
# mDNS
#
CONFIG_MDNS_MAX_SERVICES=10
CONFIG_MDNS_TASK_PRIORITY=1
CONFIG_MDNS_TASK_STACK_SIZE=4096
# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_MDNS_TASK_AFFINITY_CPU0=y
# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
CONFIG_MDNS_TASK_AFFINITY=0x0
CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
# CONFIG_MDNS_STRICT_MODE is not set
CONFIG_MDNS_TIMER_PERIOD_MS=100
# end of mDNS
#
# ESP-MQTT Configurations
#
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
# end of ESP-MQTT Configurations
#
# Newlib
#
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
# end of Newlib
#
# NVS
#
# end of NVS
#
# OpenSSL
#
# CONFIG_OPENSSL_DEBUG is not set
CONFIG_OPENSSL_ERROR_STACK=y
CONFIG_OPENSSL_ASSERT_DO_NOTHING=y
# CONFIG_OPENSSL_ASSERT_EXIT is not set
# end of OpenSSL
#
# OpenThread
#
# CONFIG_OPENTHREAD_ENABLED is not set
# end of OpenThread
#
# PThreads
#
CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=2048
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
# end of PThreads
#
# SPI Flash driver
#
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=10
CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=2
CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=4096
# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
#
# Auto-detect flash chips
#
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
# end of Auto-detect flash chips
CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
# end of SPI Flash driver
#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3
#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
# end of SPIFFS Cache Configuration
CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y
#
# Debug Configuration
#
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
# end of Debug Configuration
# end of SPIFFS Configuration
#
# TCP Transport
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#
# Websocket
#
CONFIG_WS_TRANSPORT=y
CONFIG_WS_BUFFER_SIZE=1024
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# end of Websocket
# end of TCP Transport
#
# TinyUSB
#
# end of TinyUSB
#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_64BIT is not set
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
# end of Unity unit testing library
#
# Virtual file system
#
CONFIG_VFS_SUPPORT_IO=y
CONFIG_VFS_SUPPORT_DIR=y
CONFIG_VFS_SUPPORT_SELECT=y
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_VFS_SUPPORT_TERMIOS=y
#
# Host File System I/O (Semihosting)
#
CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# end of Host File System I/O (Semihosting)
# end of Virtual file system
#
# Wear Levelling
#
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# end of Wear Levelling
#
# Wi-Fi Provisioning Manager
#
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
# end of Wi-Fi Provisioning Manager
#
# Supplicant
#
CONFIG_WPA_MBEDTLS_CRYPTO=y
# CONFIG_WPA_WAPI_PSK is not set
# CONFIG_WPA_DEBUG_PRINT is not set
# CONFIG_WPA_TESTING_OPTIONS is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# CONFIG_WPA_WPS_STRICT is not set
# CONFIG_WPA_11KV_SUPPORT is not set
# end of Supplicant
#
# Button
#
CONFIG_IO_GLITCH_FILTER_TIME_MS=50
# end of Button
#
# DSP Library
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_DSP_OPTIMIZATIONS_SUPPORTED=y
# CONFIG_DSP_ANSI is not set
CONFIG_DSP_OPTIMIZED=y
CONFIG_DSP_OPTIMIZATION=1
# CONFIG_DSP_MAX_FFT_SIZE_512 is not set
# CONFIG_DSP_MAX_FFT_SIZE_1024 is not set
# CONFIG_DSP_MAX_FFT_SIZE_2048 is not set
CONFIG_DSP_MAX_FFT_SIZE_4096=y
# CONFIG_DSP_MAX_FFT_SIZE_8192 is not set
# CONFIG_DSP_MAX_FFT_SIZE_16384 is not set
# CONFIG_DSP_MAX_FFT_SIZE_32768 is not set
CONFIG_DSP_MAX_FFT_SIZE=4096
# end of DSP Library
# CONFIG_C_IMPL is not set
CONFIG_XTENSA_IMPL=y
#
# ESP-FACE Configuration
#
CONFIG_MTMN_LITE_QUANT=y
# CONFIG_MTMN_LITE_FLOAT is not set
# CONFIG_MTMN_HEAVY_QUANT is not set
# CONFIG_FRMN is not set
CONFIG_MFN56_1X=y
# CONFIG_MFN56_2X is not set
# CONFIG_MFN56_3X is not set
# CONFIG_MFN56_4X is not set
#
# Object Detection
#
# CONFIG_DETECT_WITH_LANDMARK is not set
# end of Object Detection
#
# Pose Estimation
#
CONFIG_HD_NANO1=y
# CONFIG_HD_LITE1 is not set
CONFIG_HP_NANO1=y
# CONFIG_HP_LITE1 is not set
# end of Pose Estimation
# end of ESP-FACE Configuration
#
# Camera configuration
#
CONFIG_OV7670_SUPPORT=y
CONFIG_OV7725_SUPPORT=y
CONFIG_NT99141_SUPPORT=y
CONFIG_OV2640_SUPPORT=y
CONFIG_OV3660_SUPPORT=y
CONFIG_OV5640_SUPPORT=y
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_GC2145_SUPPORT=y
CONFIG_GC032A_SUPPORT=y
CONFIG_GC0308_SUPPORT=y
# CONFIG_SCCB_HARDWARE_I2C_PORT0 is not set
CONFIG_SCCB_HARDWARE_I2C_PORT1=y
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# CONFIG_GC_SENSOR_WINDOWING_MODE is not set
CONFIG_GC_SENSOR_SUBSAMPLE_MODE=y
CONFIG_CAMERA_CORE0=y
# CONFIG_CAMERA_CORE1 is not set
# CONFIG_CAMERA_NO_AFFINITY is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_CAMERA_DMA_BUFFER_SIZE_MAX=32768
# end of Camera configuration
#
# LittleFS
#
CONFIG_LITTLEFS_MAX_PARTITIONS=3
CONFIG_LITTLEFS_PAGE_SIZE=256
CONFIG_LITTLEFS_OBJ_NAME_LEN=64
CONFIG_LITTLEFS_READ_SIZE=128
CONFIG_LITTLEFS_WRITE_SIZE=128
CONFIG_LITTLEFS_LOOKAHEAD_SIZE=128
CONFIG_LITTLEFS_CACHE_SIZE=512
CONFIG_LITTLEFS_BLOCK_CYCLES=512
CONFIG_LITTLEFS_USE_MTIME=y
# CONFIG_LITTLEFS_USE_ONLY_HASH is not set
# CONFIG_LITTLEFS_HUMAN_READABLE is not set
CONFIG_LITTLEFS_MTIME_USE_SECONDS=y
# CONFIG_LITTLEFS_MTIME_USE_NONCE is not set
# CONFIG_LITTLEFS_SPIFFS_COMPAT is not set
# end of LittleFS
# end of Component config
#
# Compatibility options
#
# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
# end of Compatibility options
# Deprecated options for backward compatibility
CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
CONFIG_LOG_BOOTLOADER_LEVEL_NONE=y
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
CONFIG_LOG_BOOTLOADER_LEVEL=0
# CONFIG_APP_ROLLBACK_ENABLE is not set
# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
# CONFIG_FLASHMODE_QIO is not set
# CONFIG_FLASHMODE_QOUT is not set
CONFIG_FLASHMODE_DIO=y
# CONFIG_FLASHMODE_DOUT is not set
# CONFIG_MONITOR_BAUD_9600B is not set
# CONFIG_MONITOR_BAUD_57600B is not set
CONFIG_MONITOR_BAUD_115200B=y
# CONFIG_MONITOR_BAUD_230400B is not set
# CONFIG_MONITOR_BAUD_921600B is not set
# CONFIG_MONITOR_BAUD_2MB is not set
# CONFIG_MONITOR_BAUD_OTHER is not set
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG is not set
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
CONFIG_CXX_EXCEPTIONS=y
CONFIG_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
# CONFIG_STACK_CHECK_NONE is not set
CONFIG_STACK_CHECK_NORM=y
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
CONFIG_STACK_CHECK=y
CONFIG_WARN_WRITE_STRINGS=y
# CONFIG_DISABLE_GCC8_WARNINGS is not set
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
# CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY is not set
# CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY is not set
CONFIG_BTDM_CONTROLLER_MODE_BTDM=y
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN=3
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN=2
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN=0
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=3
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=2
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI=y
# CONFIG_BTDM_CONTROLLER_HCI_MODE_UART_H4 is not set
CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=y
CONFIG_BLE_SCAN_DUPLICATE=y
CONFIG_SCAN_DUPLICATE_BY_DEVICE_ADDR=y
# CONFIG_SCAN_DUPLICATE_BY_ADV_DATA is not set
# CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR is not set
CONFIG_SCAN_DUPLICATE_TYPE=0
CONFIG_DUPLICATE_SCAN_CACHE_SIZE=20
# CONFIG_BLE_MESH_SCAN_DUPLICATE_EN is not set
CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_NUM=100
CONFIG_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
CONFIG_BLUEDROID_ENABLED=y
# CONFIG_NIMBLE_ENABLED is not set
CONFIG_BTC_TASK_STACK_SIZE=8192
CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
# CONFIG_BLUEDROID_PINNED_TO_CORE_1 is not set
CONFIG_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BTU_TASK_STACK_SIZE=4096
# CONFIG_BLUEDROID_MEM_DEBUG is not set
CONFIG_CLASSIC_BT_ENABLED=y
CONFIG_A2DP_ENABLE=y
CONFIG_HFP_ENABLE=y
CONFIG_HFP_CLIENT_ENABLE=y
# CONFIG_HFP_AG_ENABLE is not set
CONFIG_HFP_AUDIO_DATA_PATH_PCM=y
# CONFIG_HFP_AUDIO_DATA_PATH_HCI is not set
CONFIG_GATTS_ENABLE=y
# CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
CONFIG_GATTC_ENABLE=y
# CONFIG_GATTC_CACHE_NVS_FLASH is not set
CONFIG_BLE_SMP_ENABLE=y
# CONFIG_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
# CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK is not set
CONFIG_SMP_ENABLE=y
# CONFIG_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY is not set
CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
CONFIG_ADC2_DISABLE_DAC=y
CONFIG_SPIRAM_SUPPORT=y
# CONFIG_WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST is not set
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
CONFIG_ULP_COPROC_ENABLED=y
CONFIG_ULP_COPROC_RESERVE_MEM=512
CONFIG_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_POST_EVENTS_FROM_ISR=y
CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_REDUCE_PHY_TX_POWER=y
# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2048
CONFIG_MAIN_TASK_STACK_SIZE=4096
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART=y
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_INT_WDT_CHECK_CPU1=y
CONFIG_TASK_WDT=y
CONFIG_TASK_WDT_PANIC=y
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
# CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=4096
CONFIG_SW_COEXIST_ENABLE=y
# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
# CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT is not set
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
CONFIG_MB_TIMER_PORT_ENABLED=y
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0
# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
# CONFIG_L2_TO_L3_COPY is not set
# CONFIG_USE_ONLY_LWIP_SELECT is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=6
CONFIG_TCP_MSS=1436
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=2560
# CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_TCPIP_TASK_AFFINITY_CPU0=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x0
CONFIG_PPP_SUPPORT=y
# CONFIG_PPP_NOTIFY_PHASE_SUPPORT is not set
CONFIG_PPP_PAP_SUPPORT=y
CONFIG_PPP_CHAP_SUPPORT=y
CONFIG_PPP_MSCHAP_SUPPORT=y
CONFIG_PPP_MPPE_SUPPORT=y
# CONFIG_PPP_DEBUG_ON is not set
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=2048
CONFIG_ESP32_PTHREAD_STACK_MIN=768
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# End of deprecated options