arduino-esp32/tools/sdk/esp32c3/sdkconfig

1812 lines
56 KiB
Plaintext
Raw Normal View History

2021-04-14 17:10:05 +02:00
#
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
#
CONFIG_IDF_CMAKE=y
CONFIG_IDF_TARGET_ARCH_RISCV=y
CONFIG_IDF_TARGET="esp32c3"
CONFIG_IDF_TARGET_ESP32C3=y
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0005
#
# SDK tool configuration
#
CONFIG_SDK_TOOLPREFIX="riscv32-esp-elf-"
# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
# end of SDK tool configuration
#
# Build type
#
CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
CONFIG_APP_BUILD_GENERATE_BINARIES=y
CONFIG_APP_BUILD_BOOTLOADER=y
CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
# end of Build type
#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
# end of Application manager
#
# Bootloader config
#
CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x0
CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
CONFIG_BOOTLOADER_LOG_LEVEL=3
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
# end of Bootloader config
#
# Security features
#
CONFIG_SECURE_BOOT_SUPPORTS_RSA=y
CONFIG_SECURE_TARGET_HAS_SECURE_ROM_DL_MODE=y
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
# end of Security features
#
# Boot ROM Behavior
#
CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y
# CONFIG_BOOT_ROM_LOG_ALWAYS_OFF is not set
# CONFIG_BOOT_ROM_LOG_ON_GPIO_HIGH is not set
# CONFIG_BOOT_ROM_LOG_ON_GPIO_LOW is not set
# end of Boot ROM Behavior
#
# Serial flasher config
#
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
# CONFIG_ESPTOOLPY_NO_STUB is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE="dio"
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ="80m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
# end of Serial flasher config
#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
2021-04-14 17:10:05 +02:00
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y
# end of Partition Table
#
# Arduino Configuration
#
CONFIG_ENABLE_ARDUINO_DEPENDS=y
CONFIG_AUTOSTART_ARDUINO=y
CONFIG_ARDUINO_RUN_CORE0=y
# CONFIG_ARDUINO_RUN_CORE1 is not set
# CONFIG_ARDUINO_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_RUNNING_CORE=0
CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
CONFIG_ARDUINO_EVENT_RUN_CORE0=y
# CONFIG_ARDUINO_EVENT_RUN_CORE1 is not set
# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_EVENT_RUNNING_CORE=0
CONFIG_ARDUINO_UDP_RUN_CORE0=y
# CONFIG_ARDUINO_UDP_RUN_CORE1 is not set
# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
CONFIG_ARDUINO_UDP_RUNNING_CORE=0
# CONFIG_ARDUINO_ISR_IRAM is not set
# CONFIG_DISABLE_HAL_LOCKS is not set
#
# Debug Log Configuration
#
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_NONE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR=y
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_WARN is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=1
# CONFIG_ARDUHAL_LOG_COLORS is not set
# CONFIG_ARDUHAL_ESP_LOG is not set
# end of Debug Log Configuration
CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT=y
# CONFIG_ARDUHAL_PARTITION_SCHEME_MINIMAL is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_HUGE_APP is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS is not set
CONFIG_ARDUHAL_PARTITION_SCHEME="default"
# CONFIG_AUTOCONNECT_WIFI is not set
# CONFIG_ARDUINO_SELECTIVE_COMPILATION is not set
# end of Arduino Configuration
#
# Arduino TinyUSB
#
# end of Arduino TinyUSB
#
# Compiler options
#
CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
2021-04-14 17:10:05 +02:00
# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
CONFIG_COMPILER_HIDE_PATHS_MACROS=y
# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
# CONFIG_COMPILER_CXX_RTTI is not set
CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
# CONFIG_COMPILER_DUMP_RTL_FILES is not set
# end of Compiler options
#
# Component config
#
#
# Application Level Tracing
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# CONFIG_APPTRACE_DEST_JTAG is not set
2021-04-14 17:10:05 +02:00
CONFIG_APPTRACE_DEST_NONE=y
CONFIG_APPTRACE_LOCK_ENABLE=y
# end of Application Level Tracing
#
# ESP-ASIO
#
# CONFIG_ASIO_SSL_SUPPORT is not set
# end of ESP-ASIO
#
# Bluetooth
#
CONFIG_BT_ENABLED=y
CONFIG_BT_CTRL_ESP32C3=y
CONFIG_BT_SOC_SUPPORT_5_0=y
CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CTRL_PINNED_TO_CORE=0
CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
#
# Bluetooth controller(ESP32C3 Bluetooth Low Energy)
#
CONFIG_BT_CTRL_MODE_EFF=1
CONFIG_BT_CTRL_BLE_MAX_ACT=10
CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=10
CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
CONFIG_BT_CTRL_PINNED_TO_CORE=0
CONFIG_BT_CTRL_HCI_MODE_VHCI=y
# CONFIG_BT_CTRL_HCI_MODE_UART_H4 is not set
CONFIG_BT_CTRL_HCI_TL=1
CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
# CONFIG_BT_CTRL_HW_CCA is not set
CONFIG_BT_CTRL_HW_CCA_EFF=0
CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG=y
# CONFIG_BT_CTRL_CE_LENGTH_TYPE_CE is not set
# CONFIG_BT_CTRL_CE_LENGTH_TYPE_SD is not set
CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF=0
CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0=y
# CONFIG_BT_CTRL_TX_ANTENNA_INDEX_1 is not set
CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF=0
CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0=y
# CONFIG_BT_CTRL_RX_ANTENNA_INDEX_1 is not set
CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF=0
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N27 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N24 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N21 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N18 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N15 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N12 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N9 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N6 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N3 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N0 is not set
CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P3=y
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P6 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P12 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P15 is not set
# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P18 is not set
CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=10
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE=y
# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA is not set
# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA_DEVICE is not set
CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
# CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN is not set
# CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
#
# MODEM SLEEP Options
#
# CONFIG_BT_CTRL_MODEM_SLEEP is not set
# end of MODEM SLEEP Options
CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
CONFIG_BT_CTRL_HCI_TL_EFF=1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# CONFIG_BT_CTRL_AGC_RECORRECT_EN is not set
2021-04-14 17:10:05 +02:00
# end of Bluetooth controller(ESP32C3 Bluetooth Low Energy)
#
# MODEM SLEEP Options
#
# end of MODEM SLEEP Options
CONFIG_BT_BLUEDROID_ENABLED=y
# CONFIG_BT_NIMBLE_ENABLED is not set
# CONFIG_BT_CONTROLLER_ONLY is not set
#
# Bluedroid Options
#
CONFIG_BT_BTC_TASK_STACK_SIZE=3072
CONFIG_BT_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BT_BTU_TASK_STACK_SIZE=4096
# CONFIG_BT_BLUEDROID_MEM_DEBUG is not set
CONFIG_BT_BLE_ENABLED=y
CONFIG_BT_GATTS_ENABLE=y
# CONFIG_BT_GATTS_PPCP_CHAR_GAP is not set
CONFIG_BT_BLE_BLUFI_ENABLE=y
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_BT_GATT_MAX_SR_PROFILES=8
2021-04-14 17:10:05 +02:00
# CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO=y
CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE=0
CONFIG_BT_GATTC_ENABLE=y
# CONFIG_BT_GATTC_CACHE_NVS_FLASH is not set
CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
2021-04-14 17:10:05 +02:00
CONFIG_BT_BLE_SMP_ENABLE=y
# CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
# CONFIG_BT_STACK_NO_LOG is not set
#
# BT DEBUG LOG LEVEL
#
# CONFIG_BT_LOG_HCI_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_HCI_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_HCI_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_HCI_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_HCI_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_HCI_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_HCI_TRACE_LEVEL=2
# CONFIG_BT_LOG_BTM_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_BTM_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_BTM_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_BTM_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_BTM_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_BTM_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_BTM_TRACE_LEVEL=2
# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_L2CAP_TRACE_LEVEL=2
# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL=2
# CONFIG_BT_LOG_SDP_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_SDP_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_SDP_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_SDP_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_SDP_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_SDP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_SDP_TRACE_LEVEL=2
# CONFIG_BT_LOG_GAP_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_GAP_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_GAP_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_GAP_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_GAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_GAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_GAP_TRACE_LEVEL=2
# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_BNEP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_BNEP_TRACE_LEVEL=2
# CONFIG_BT_LOG_PAN_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_PAN_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_PAN_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_PAN_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_PAN_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_PAN_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_PAN_TRACE_LEVEL=2
# CONFIG_BT_LOG_A2D_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_A2D_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_A2D_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_A2D_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_A2D_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_A2D_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_A2D_TRACE_LEVEL=2
# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_AVDT_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_AVDT_TRACE_LEVEL=2
# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_AVCT_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_AVCT_TRACE_LEVEL=2
# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_AVRC_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_AVRC_TRACE_LEVEL=2
# CONFIG_BT_LOG_MCA_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_MCA_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_MCA_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_MCA_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_MCA_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_MCA_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_MCA_TRACE_LEVEL=2
# CONFIG_BT_LOG_HID_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_HID_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_HID_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_HID_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_HID_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_HID_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_HID_TRACE_LEVEL=2
# CONFIG_BT_LOG_APPL_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_APPL_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_APPL_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_APPL_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_APPL_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_APPL_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_APPL_TRACE_LEVEL=2
# CONFIG_BT_LOG_GATT_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_GATT_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_GATT_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_GATT_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_GATT_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_GATT_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_GATT_TRACE_LEVEL=2
# CONFIG_BT_LOG_SMP_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_SMP_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_SMP_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_SMP_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_SMP_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_SMP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_SMP_TRACE_LEVEL=2
# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_BTIF_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_BTIF_TRACE_LEVEL=2
# CONFIG_BT_LOG_BTC_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_BTC_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_BTC_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_BTC_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_BTC_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_BTC_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_BTC_TRACE_LEVEL=2
# CONFIG_BT_LOG_OSI_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_OSI_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_OSI_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_OSI_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_OSI_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_OSI_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_OSI_TRACE_LEVEL=2
# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_NONE is not set
# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_ERROR is not set
CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING=y
# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_API is not set
# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_EVENT is not set
# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_DEBUG is not set
# CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE is not set
CONFIG_BT_LOG_BLUFI_TRACE_LEVEL=2
# end of BT DEBUG LOG LEVEL
CONFIG_BT_ACL_CONNECTIONS=4
CONFIG_BT_MULTI_CONNECTION_ENBALE=y
2021-04-14 17:10:05 +02:00
# CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST is not set
# CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY is not set
# CONFIG_BT_BLE_HOST_QUEUE_CONG_CHECK is not set
CONFIG_BT_SMP_ENABLE=y
CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
CONFIG_BT_BLE_RPA_SUPPORTED=y
CONFIG_BT_BLE_50_FEATURES_SUPPORTED=y
CONFIG_BT_BLE_42_FEATURES_SUPPORTED=y
2021-04-14 17:10:05 +02:00
CONFIG_BT_RESERVE_DRAM=0xdb5c
# end of Bluedroid Options
CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=y
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_BT_NIMBLE_USE_ESP_TIMER=y
2021-04-14 17:10:05 +02:00
# end of Bluetooth
# CONFIG_BLE_MESH is not set
#
# CoAP Configuration
#
CONFIG_COAP_MBEDTLS_PSK=y
# CONFIG_COAP_MBEDTLS_PKI is not set
# CONFIG_COAP_MBEDTLS_DEBUG is not set
CONFIG_COAP_LOG_DEFAULT_LEVEL=0
# end of CoAP Configuration
#
# Driver configurations
#
#
# ADC configuration
#
# CONFIG_ADC_FORCE_XPD_FSM is not set
CONFIG_ADC_DISABLE_DAC=y
# end of ADC configuration
#
# SPI configuration
#
# CONFIG_SPI_MASTER_IN_IRAM is not set
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
# CONFIG_SPI_SLAVE_IN_IRAM is not set
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
# end of SPI configuration
#
# TWAI configuration
#
# CONFIG_TWAI_ISR_IN_IRAM is not set
# end of TWAI configuration
#
# UART configuration
#
# CONFIG_UART_ISR_IN_IRAM is not set
# end of UART configuration
# end of Driver configurations
#
# eFuse Bit Manager
#
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
CONFIG_EFUSE_MAX_BLK_LEN=256
# end of eFuse Bit Manager
#
# ESP-TLS
#
CONFIG_ESP_TLS_USING_MBEDTLS=y
CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
CONFIG_ESP_TLS_SERVER=y
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE is not set
# end of ESP-TLS
#
# ESP32C3-Specific
#
# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set
CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y
CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160
CONFIG_ESP32C3_REV_MIN_0=y
# CONFIG_ESP32C3_REV_MIN_1 is not set
# CONFIG_ESP32C3_REV_MIN_2 is not set
# CONFIG_ESP32C3_REV_MIN_3 is not set
CONFIG_ESP32C3_REV_MIN=0
CONFIG_ESP32C3_DEBUG_OCDAWARE=y
# CONFIG_ESP32C3_DEBUG_STUBS_ENABLE is not set
CONFIG_ESP32C3_BROWNOUT_DET=y
CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set
CONFIG_ESP32C3_BROWNOUT_DET_LVL=7
CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y
# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set
# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y
# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=576
CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y
# end of ESP32C3-Specific
#
# ADC-Calibration
#
# end of ADC-Calibration
#
# Common ESP-related
#
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
# end of Common ESP-related
#
# Ethernet
#
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_SPI_ETHERNET=y
# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
2021-04-14 17:10:05 +02:00
# CONFIG_ETH_USE_OPENETH is not set
# end of Ethernet
#
# Event Loop Library
#
# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
CONFIG_ESP_EVENT_POST_FROM_ISR=y
CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
# end of Event Loop Library
#
# GDB Stub
#
# end of GDB Stub
#
# ESP HTTP client
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
# end of ESP HTTP client
#
# HTTP Server
#
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_HTTPD_LOG_PURGE_DATA is not set
CONFIG_HTTPD_WS_SUPPORT=y
# end of HTTP Server
#
# ESP HTTPS OTA
#
# CONFIG_OTA_ALLOW_HTTP is not set
# end of ESP HTTPS OTA
#
# ESP HTTPS server
#
CONFIG_ESP_HTTPS_SERVER_ENABLE=y
# end of ESP HTTPS server
#
# Hardware Settings
#
#
# MAC Config
#
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
# CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES=4
2021-04-14 17:10:05 +02:00
# end of MAC Config
#
# Sleep Config
#
CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y
# end of Sleep Config
2021-04-14 17:10:05 +02:00
# end of Hardware Settings
#
# LCD and Touch Panel
#
# end of LCD and Touch Panel
2021-04-14 17:10:05 +02:00
#
# ESP NETIF Adapter
#
CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
CONFIG_ESP_NETIF_TCPIP_LWIP=y
# CONFIG_ESP_NETIF_LOOPBACK is not set
CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
# end of ESP NETIF Adapter
#
# PHY
#
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
# end of PHY
2021-04-14 17:10:05 +02:00
#
# Power Management
#
# CONFIG_PM_ENABLE is not set
CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
2021-04-14 17:10:05 +02:00
# end of Power Management
#
# ESP System Settings
#
# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
2021-04-14 17:10:05 +02:00
CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE=y
CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK=y
CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y
#
# Memory protection
#
CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=y
CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK=y
# end of Memory protection
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
# CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG is not set
2021-04-14 17:10:05 +02:00
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_NONE is not set
CONFIG_ESP_CONSOLE_UART=y
CONFIG_ESP_CONSOLE_UART_NUM=0
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_ESP_INT_WDT=y
CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
CONFIG_ESP_TASK_WDT=y
# CONFIG_ESP_TASK_WDT_PANIC is not set
CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
# end of ESP System Settings
#
# High resolution timer (esp_timer)
#
# CONFIG_ESP_TIMER_PROFILING is not set
CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
CONFIG_ESP_TIMER_IMPL_SYSTIMER=y
# end of High resolution timer (esp_timer)
#
# Wi-Fi
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_ESP32_WIFI_ENABLED=y
2021-04-14 17:10:05 +02:00
CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
# CONFIG_ESP32_WIFI_IRAM_OPT is not set
# CONFIG_ESP32_WIFI_RX_IRAM_OPT is not set
CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
CONFIG_ESP_WIFI_FTM_ENABLE=y
CONFIG_ESP_WIFI_FTM_INITIATOR_SUPPORT=y
CONFIG_ESP_WIFI_FTM_RESPONDER_SUPPORT=y
2021-04-14 17:10:05 +02:00
# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
# end of Wi-Fi
#
# Core dump
#
# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
# end of Core dump
#
# FAT Filesystem support
#
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
CONFIG_FATFS_CODEPAGE_437=y
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
# CONFIG_FATFS_CODEPAGE_850 is not set
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=437
# CONFIG_FATFS_LFN_NONE is not set
CONFIG_FATFS_LFN_HEAP=y
# CONFIG_FATFS_LFN_STACK is not set
CONFIG_FATFS_MAX_LFN=255
CONFIG_FATFS_API_ENCODING_ANSI_OEM=y
# CONFIG_FATFS_API_ENCODING_UTF_16 is not set
# CONFIG_FATFS_API_ENCODING_UTF_8 is not set
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
# CONFIG_FATFS_USE_FASTSEEK is not set
# end of FAT Filesystem support
#
# Modbus configuration
#
CONFIG_FMB_COMM_MODE_TCP_EN=y
CONFIG_FMB_TCP_PORT_DEFAULT=502
CONFIG_FMB_TCP_PORT_MAX_CONN=5
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
CONFIG_FMB_COMM_MODE_RTU_EN=y
CONFIG_FMB_COMM_MODE_ASCII_EN=y
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
CONFIG_FMB_QUEUE_LENGTH=20
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
CONFIG_FMB_TIMER_PORT_ENABLED=y
CONFIG_FMB_TIMER_GROUP=0
CONFIG_FMB_TIMER_INDEX=0
# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
# end of Modbus configuration
#
# FreeRTOS
#
CONFIG_FREERTOS_UNICORE=y
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y
CONFIG_FREERTOS_HZ=1000
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
# CONFIG_FREERTOS_ASSERT_DISABLE is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
CONFIG_FREERTOS_ISR_STACKSIZE=1536
# CONFIG_FREERTOS_LEGACY_HOOKS is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
CONFIG_FREERTOS_DEBUG_OCDAWARE=y
# end of FreeRTOS
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#
# Hardware Abstraction Layer (HAL) and Low Level (LL)
#
CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
# CONFIG_HAL_ASSERTION_DISABLE is not set
# CONFIG_HAL_ASSERTION_SILIENT is not set
# CONFIG_HAL_ASSERTION_ENABLE is not set
CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
2021-04-14 17:10:05 +02:00
#
# Heap memory debugging
#
CONFIG_HEAP_POISONING_DISABLED=y
# CONFIG_HEAP_POISONING_LIGHT is not set
# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
CONFIG_HEAP_TRACING_OFF=y
# CONFIG_HEAP_TRACING_STANDALONE is not set
# CONFIG_HEAP_TRACING_TOHOST is not set
# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
# end of Heap memory debugging
#
# jsmn
#
# CONFIG_JSMN_PARENT_LINKS is not set
# CONFIG_JSMN_STRICT is not set
# end of jsmn
#
# libsodium
#
# end of libsodium
#
# Log output
#
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=1
CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
CONFIG_LOG_MAXIMUM_LEVEL=1
2021-04-14 17:10:05 +02:00
# CONFIG_LOG_COLORS is not set
CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
# end of Log output
#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
# CONFIG_LWIP_NETIF_API is not set
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
# CONFIG_LWIP_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_TIMERS_ONDEMAND=y
CONFIG_LWIP_MAX_SOCKETS=10
# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
# CONFIG_LWIP_SO_LINGER is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=y
# CONFIG_LWIP_NETBUF_RECVINFO is not set
CONFIG_LWIP_IP4_FRAG=y
CONFIG_LWIP_IP6_FRAG=y
# CONFIG_LWIP_IP4_REASSEMBLY is not set
# CONFIG_LWIP_IP6_REASSEMBLY is not set
# CONFIG_LWIP_IP_FORWARD is not set
# CONFIG_LWIP_STATS is not set
# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
CONFIG_LWIP_GARP_TMR_INTERVAL=60
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
2021-04-14 17:10:05 +02:00
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
#
# DHCP server
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_LWIP_DHCPS=y
2021-04-14 17:10:05 +02:00
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# end of DHCP server
# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_IPV6=y
# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
# CONFIG_LWIP_IPV6_FORWARD is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_LWIP_IPV6_RDNSS_MAX_DNS_SERVERS=0
# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
2021-04-14 17:10:05 +02:00
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
CONFIG_LWIP_TCP_MAXRTX=12
CONFIG_LWIP_TCP_SYNMAXRTX=12
CONFIG_LWIP_TCP_MSS=1440
CONFIG_LWIP_TCP_TMR_INTERVAL=250
CONFIG_LWIP_TCP_MSL=60000
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
CONFIG_LWIP_TCP_WND_DEFAULT=5744
CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
# CONFIG_LWIP_TCP_SACK_OUT is not set
# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_LWIP_TCP_OVERSIZE_MSS=y
# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_TCP_RTO_TIME=1500
# end of TCP
#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
# end of UDP
#
# Checksums
#
# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
# end of Checksums
CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_LWIP_PPP_SUPPORT is not set
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
# CONFIG_LWIP_SLIP_SUPPORT is not set
#
# ICMP
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_LWIP_ICMP=y
2021-04-14 17:10:05 +02:00
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
# end of ICMP
#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16
# end of LWIP RAW API
#
# SNTP
#
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
# end of SNTP
CONFIG_LWIP_ESP_LWIP_ASSERT=y
#
# Hooks
#
# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
2021-04-14 17:10:05 +02:00
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
# end of Hooks
# CONFIG_LWIP_DEBUG is not set
2021-04-14 17:10:05 +02:00
# end of LWIP
#
# mbedTLS
#
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
# CONFIG_MBEDTLS_DEBUG is not set
#
# Certificate Bundle
#
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
# end of Certificate Bundle
# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
# CONFIG_MBEDTLS_CMAC_C is not set
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_AES_USE_INTERRUPT=y
2021-04-14 17:10:05 +02:00
CONFIG_MBEDTLS_HARDWARE_MPI=y
CONFIG_MBEDTLS_HARDWARE_SHA=y
CONFIG_MBEDTLS_ROM_MD5=y
2021-04-14 17:10:05 +02:00
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
CONFIG_MBEDTLS_SHA512_C=y
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
# CONFIG_MBEDTLS_TLS_DISABLED is not set
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y
#
# TLS Key Exchange Methods
#
CONFIG_MBEDTLS_PSK_MODES=y
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
# end of TLS Key Exchange Methods
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
CONFIG_MBEDTLS_CAMELLIA_C=y
# CONFIG_MBEDTLS_DES_C is not set
CONFIG_MBEDTLS_RC4_DISABLED=y
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
# CONFIG_MBEDTLS_RC4_ENABLED is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
# CONFIG_MBEDTLS_NIST_KW_C is not set
2021-04-14 17:10:05 +02:00
# end of Symmetric Ciphers
# CONFIG_MBEDTLS_RIPEMD160_C is not set
#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
# end of Certificates
CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
# CONFIG_MBEDTLS_ECJPAKE_C is not set
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
# CONFIG_MBEDTLS_POLY1305_C is not set
# CONFIG_MBEDTLS_CHACHA20_C is not set
# CONFIG_MBEDTLS_HKDF_C is not set
# CONFIG_MBEDTLS_THREADING_C is not set
CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI=y
# CONFIG_MBEDTLS_SECURITY_RISKS is not set
# end of mbedTLS
#
# mDNS
#
CONFIG_MDNS_MAX_SERVICES=10
CONFIG_MDNS_TASK_PRIORITY=1
CONFIG_MDNS_TASK_STACK_SIZE=4096
# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_MDNS_TASK_AFFINITY_CPU0=y
CONFIG_MDNS_TASK_AFFINITY=0x0
CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
# CONFIG_MDNS_STRICT_MODE is not set
2021-04-14 17:10:05 +02:00
CONFIG_MDNS_TIMER_PERIOD_MS=100
# end of mDNS
#
# ESP-MQTT Configurations
#
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
# end of ESP-MQTT Configurations
#
# Newlib
#
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
# end of Newlib
#
# NVS
#
# end of NVS
#
# OpenSSL
#
# CONFIG_OPENSSL_DEBUG is not set
CONFIG_OPENSSL_ERROR_STACK=y
# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set
CONFIG_OPENSSL_ASSERT_EXIT=y
# end of OpenSSL
#
# OpenThread
#
# CONFIG_OPENTHREAD_ENABLED is not set
# end of OpenThread
2021-04-14 17:10:05 +02:00
#
# PThreads
#
CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
# end of PThreads
#
# SPI Flash driver
#
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
# CONFIG_SPI_FLASH_ROM_IMPL is not set
CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
# CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
2021-04-14 17:10:05 +02:00
#
# Auto-detect flash chips
#
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
# end of Auto-detect flash chips
CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
# end of SPI Flash driver
#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3
#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
# end of SPIFFS Cache Configuration
CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y
#
# Debug Configuration
#
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
# end of Debug Configuration
# end of SPIFFS Configuration
#
# TCP Transport
#
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#
# Websocket
#
CONFIG_WS_TRANSPORT=y
2021-04-14 17:10:05 +02:00
CONFIG_WS_BUFFER_SIZE=1024
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# end of Websocket
2021-04-14 17:10:05 +02:00
# end of TCP Transport
#
# TinyUSB
#
# end of TinyUSB
#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_64BIT is not set
2021-04-14 17:10:05 +02:00
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
# end of Unity unit testing library
#
# Virtual file system
#
CONFIG_VFS_SUPPORT_IO=y
CONFIG_VFS_SUPPORT_DIR=y
CONFIG_VFS_SUPPORT_SELECT=y
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_VFS_SUPPORT_TERMIOS=y
#
# Host File System I/O (Semihosting)
#
CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# end of Host File System I/O (Semihosting)
# end of Virtual file system
#
# Wear Levelling
#
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# end of Wear Levelling
#
# Wi-Fi Provisioning Manager
#
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
# end of Wi-Fi Provisioning Manager
#
# Supplicant
#
CONFIG_WPA_MBEDTLS_CRYPTO=y
# CONFIG_WPA_WAPI_PSK is not set
# CONFIG_WPA_DEBUG_PRINT is not set
# CONFIG_WPA_TESTING_OPTIONS is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
# CONFIG_WPA_WPS_STRICT is not set
2021-04-14 17:10:05 +02:00
# CONFIG_WPA_11KV_SUPPORT is not set
# end of Supplicant
#
# LittleFS
#
CONFIG_LITTLEFS_MAX_PARTITIONS=3
CONFIG_LITTLEFS_PAGE_SIZE=256
CONFIG_LITTLEFS_OBJ_NAME_LEN=64
CONFIG_LITTLEFS_READ_SIZE=128
CONFIG_LITTLEFS_WRITE_SIZE=128
CONFIG_LITTLEFS_LOOKAHEAD_SIZE=128
CONFIG_LITTLEFS_CACHE_SIZE=512
CONFIG_LITTLEFS_BLOCK_CYCLES=512
CONFIG_LITTLEFS_USE_MTIME=y
# CONFIG_LITTLEFS_USE_ONLY_HASH is not set
# CONFIG_LITTLEFS_HUMAN_READABLE is not set
CONFIG_LITTLEFS_MTIME_USE_SECONDS=y
# CONFIG_LITTLEFS_MTIME_USE_NONCE is not set
# CONFIG_LITTLEFS_SPIFFS_COMPAT is not set
# end of LittleFS
# end of Component config
#
# Compatibility options
#
# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
# end of Compatibility options
# Deprecated options for backward compatibility
CONFIG_TOOLPREFIX="riscv32-esp-elf-"
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
CONFIG_LOG_BOOTLOADER_LEVEL=3
# CONFIG_APP_ROLLBACK_ENABLE is not set
# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
# CONFIG_FLASHMODE_QIO is not set
# CONFIG_FLASHMODE_QOUT is not set
CONFIG_FLASHMODE_DIO=y
# CONFIG_FLASHMODE_DOUT is not set
# CONFIG_MONITOR_BAUD_9600B is not set
# CONFIG_MONITOR_BAUD_57600B is not set
CONFIG_MONITOR_BAUD_115200B=y
# CONFIG_MONITOR_BAUD_230400B is not set
# CONFIG_MONITOR_BAUD_921600B is not set
# CONFIG_MONITOR_BAUD_2MB is not set
# CONFIG_MONITOR_BAUD_OTHER is not set
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200
CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
2021-04-14 17:10:05 +02:00
# CONFIG_CXX_EXCEPTIONS is not set
CONFIG_STACK_CHECK_NONE=y
# CONFIG_STACK_CHECK_NORM is not set
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
# CONFIG_WARN_WRITE_STRINGS is not set
# CONFIG_DISABLE_GCC8_WARNINGS is not set
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_BLUEDROID_ENABLED=y
# CONFIG_NIMBLE_ENABLED is not set
CONFIG_BTC_TASK_STACK_SIZE=3072
CONFIG_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BTU_TASK_STACK_SIZE=4096
# CONFIG_BLUEDROID_MEM_DEBUG is not set
CONFIG_GATTS_ENABLE=y
# CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
CONFIG_GATTC_ENABLE=y
# CONFIG_GATTC_CACHE_NVS_FLASH is not set
CONFIG_BLE_SMP_ENABLE=y
# CONFIG_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
# CONFIG_HCI_TRACE_LEVEL_NONE is not set
# CONFIG_HCI_TRACE_LEVEL_ERROR is not set
CONFIG_HCI_TRACE_LEVEL_WARNING=y
# CONFIG_HCI_TRACE_LEVEL_API is not set
# CONFIG_HCI_TRACE_LEVEL_EVENT is not set
# CONFIG_HCI_TRACE_LEVEL_DEBUG is not set
# CONFIG_HCI_TRACE_LEVEL_VERBOSE is not set
CONFIG_HCI_INITIAL_TRACE_LEVEL=2
# CONFIG_BTM_TRACE_LEVEL_NONE is not set
# CONFIG_BTM_TRACE_LEVEL_ERROR is not set
CONFIG_BTM_TRACE_LEVEL_WARNING=y
# CONFIG_BTM_TRACE_LEVEL_API is not set
# CONFIG_BTM_TRACE_LEVEL_EVENT is not set
# CONFIG_BTM_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTM_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTM_INITIAL_TRACE_LEVEL=2
# CONFIG_L2CAP_TRACE_LEVEL_NONE is not set
# CONFIG_L2CAP_TRACE_LEVEL_ERROR is not set
CONFIG_L2CAP_TRACE_LEVEL_WARNING=y
# CONFIG_L2CAP_TRACE_LEVEL_API is not set
# CONFIG_L2CAP_TRACE_LEVEL_EVENT is not set
# CONFIG_L2CAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_L2CAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_L2CAP_INITIAL_TRACE_LEVEL=2
# CONFIG_RFCOMM_TRACE_LEVEL_NONE is not set
# CONFIG_RFCOMM_TRACE_LEVEL_ERROR is not set
CONFIG_RFCOMM_TRACE_LEVEL_WARNING=y
# CONFIG_RFCOMM_TRACE_LEVEL_API is not set
# CONFIG_RFCOMM_TRACE_LEVEL_EVENT is not set
# CONFIG_RFCOMM_TRACE_LEVEL_DEBUG is not set
# CONFIG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
CONFIG_RFCOMM_INITIAL_TRACE_LEVEL=2
# CONFIG_SDP_TRACE_LEVEL_NONE is not set
# CONFIG_SDP_TRACE_LEVEL_ERROR is not set
CONFIG_SDP_TRACE_LEVEL_WARNING=y
# CONFIG_SDP_TRACE_LEVEL_API is not set
# CONFIG_SDP_TRACE_LEVEL_EVENT is not set
# CONFIG_SDP_TRACE_LEVEL_DEBUG is not set
# CONFIG_SDP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL=2
# CONFIG_GAP_TRACE_LEVEL_NONE is not set
# CONFIG_GAP_TRACE_LEVEL_ERROR is not set
CONFIG_GAP_TRACE_LEVEL_WARNING=y
# CONFIG_GAP_TRACE_LEVEL_API is not set
# CONFIG_GAP_TRACE_LEVEL_EVENT is not set
# CONFIG_GAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_GAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_GAP_INITIAL_TRACE_LEVEL=2
CONFIG_BNEP_INITIAL_TRACE_LEVEL=2
# CONFIG_PAN_TRACE_LEVEL_NONE is not set
# CONFIG_PAN_TRACE_LEVEL_ERROR is not set
CONFIG_PAN_TRACE_LEVEL_WARNING=y
# CONFIG_PAN_TRACE_LEVEL_API is not set
# CONFIG_PAN_TRACE_LEVEL_EVENT is not set
# CONFIG_PAN_TRACE_LEVEL_DEBUG is not set
# CONFIG_PAN_TRACE_LEVEL_VERBOSE is not set
CONFIG_PAN_INITIAL_TRACE_LEVEL=2
# CONFIG_A2D_TRACE_LEVEL_NONE is not set
# CONFIG_A2D_TRACE_LEVEL_ERROR is not set
CONFIG_A2D_TRACE_LEVEL_WARNING=y
# CONFIG_A2D_TRACE_LEVEL_API is not set
# CONFIG_A2D_TRACE_LEVEL_EVENT is not set
# CONFIG_A2D_TRACE_LEVEL_DEBUG is not set
# CONFIG_A2D_TRACE_LEVEL_VERBOSE is not set
CONFIG_A2D_INITIAL_TRACE_LEVEL=2
# CONFIG_AVDT_TRACE_LEVEL_NONE is not set
# CONFIG_AVDT_TRACE_LEVEL_ERROR is not set
CONFIG_AVDT_TRACE_LEVEL_WARNING=y
# CONFIG_AVDT_TRACE_LEVEL_API is not set
# CONFIG_AVDT_TRACE_LEVEL_EVENT is not set
# CONFIG_AVDT_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVDT_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVDT_INITIAL_TRACE_LEVEL=2
# CONFIG_AVCT_TRACE_LEVEL_NONE is not set
# CONFIG_AVCT_TRACE_LEVEL_ERROR is not set
CONFIG_AVCT_TRACE_LEVEL_WARNING=y
# CONFIG_AVCT_TRACE_LEVEL_API is not set
# CONFIG_AVCT_TRACE_LEVEL_EVENT is not set
# CONFIG_AVCT_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVCT_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVCT_INITIAL_TRACE_LEVEL=2
# CONFIG_AVRC_TRACE_LEVEL_NONE is not set
# CONFIG_AVRC_TRACE_LEVEL_ERROR is not set
CONFIG_AVRC_TRACE_LEVEL_WARNING=y
# CONFIG_AVRC_TRACE_LEVEL_API is not set
# CONFIG_AVRC_TRACE_LEVEL_EVENT is not set
# CONFIG_AVRC_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVRC_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVRC_INITIAL_TRACE_LEVEL=2
# CONFIG_MCA_TRACE_LEVEL_NONE is not set
# CONFIG_MCA_TRACE_LEVEL_ERROR is not set
CONFIG_MCA_TRACE_LEVEL_WARNING=y
# CONFIG_MCA_TRACE_LEVEL_API is not set
# CONFIG_MCA_TRACE_LEVEL_EVENT is not set
# CONFIG_MCA_TRACE_LEVEL_DEBUG is not set
# CONFIG_MCA_TRACE_LEVEL_VERBOSE is not set
CONFIG_MCA_INITIAL_TRACE_LEVEL=2
# CONFIG_HID_TRACE_LEVEL_NONE is not set
# CONFIG_HID_TRACE_LEVEL_ERROR is not set
CONFIG_HID_TRACE_LEVEL_WARNING=y
# CONFIG_HID_TRACE_LEVEL_API is not set
# CONFIG_HID_TRACE_LEVEL_EVENT is not set
# CONFIG_HID_TRACE_LEVEL_DEBUG is not set
# CONFIG_HID_TRACE_LEVEL_VERBOSE is not set
CONFIG_HID_INITIAL_TRACE_LEVEL=2
# CONFIG_APPL_TRACE_LEVEL_NONE is not set
# CONFIG_APPL_TRACE_LEVEL_ERROR is not set
CONFIG_APPL_TRACE_LEVEL_WARNING=y
# CONFIG_APPL_TRACE_LEVEL_API is not set
# CONFIG_APPL_TRACE_LEVEL_EVENT is not set
# CONFIG_APPL_TRACE_LEVEL_DEBUG is not set
# CONFIG_APPL_TRACE_LEVEL_VERBOSE is not set
CONFIG_APPL_INITIAL_TRACE_LEVEL=2
# CONFIG_GATT_TRACE_LEVEL_NONE is not set
# CONFIG_GATT_TRACE_LEVEL_ERROR is not set
CONFIG_GATT_TRACE_LEVEL_WARNING=y
# CONFIG_GATT_TRACE_LEVEL_API is not set
# CONFIG_GATT_TRACE_LEVEL_EVENT is not set
# CONFIG_GATT_TRACE_LEVEL_DEBUG is not set
# CONFIG_GATT_TRACE_LEVEL_VERBOSE is not set
CONFIG_GATT_INITIAL_TRACE_LEVEL=2
# CONFIG_SMP_TRACE_LEVEL_NONE is not set
# CONFIG_SMP_TRACE_LEVEL_ERROR is not set
CONFIG_SMP_TRACE_LEVEL_WARNING=y
# CONFIG_SMP_TRACE_LEVEL_API is not set
# CONFIG_SMP_TRACE_LEVEL_EVENT is not set
# CONFIG_SMP_TRACE_LEVEL_DEBUG is not set
# CONFIG_SMP_TRACE_LEVEL_VERBOSE is not set
CONFIG_SMP_INITIAL_TRACE_LEVEL=2
# CONFIG_BTIF_TRACE_LEVEL_NONE is not set
# CONFIG_BTIF_TRACE_LEVEL_ERROR is not set
CONFIG_BTIF_TRACE_LEVEL_WARNING=y
# CONFIG_BTIF_TRACE_LEVEL_API is not set
# CONFIG_BTIF_TRACE_LEVEL_EVENT is not set
# CONFIG_BTIF_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTIF_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTIF_INITIAL_TRACE_LEVEL=2
# CONFIG_BTC_TRACE_LEVEL_NONE is not set
# CONFIG_BTC_TRACE_LEVEL_ERROR is not set
CONFIG_BTC_TRACE_LEVEL_WARNING=y
# CONFIG_BTC_TRACE_LEVEL_API is not set
# CONFIG_BTC_TRACE_LEVEL_EVENT is not set
# CONFIG_BTC_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTC_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTC_INITIAL_TRACE_LEVEL=2
# CONFIG_OSI_TRACE_LEVEL_NONE is not set
# CONFIG_OSI_TRACE_LEVEL_ERROR is not set
CONFIG_OSI_TRACE_LEVEL_WARNING=y
# CONFIG_OSI_TRACE_LEVEL_API is not set
# CONFIG_OSI_TRACE_LEVEL_EVENT is not set
# CONFIG_OSI_TRACE_LEVEL_DEBUG is not set
# CONFIG_OSI_TRACE_LEVEL_VERBOSE is not set
CONFIG_OSI_INITIAL_TRACE_LEVEL=2
# CONFIG_BLUFI_TRACE_LEVEL_NONE is not set
# CONFIG_BLUFI_TRACE_LEVEL_ERROR is not set
CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
# CONFIG_BLUFI_TRACE_LEVEL_API is not set
# CONFIG_BLUFI_TRACE_LEVEL_EVENT is not set
# CONFIG_BLUFI_TRACE_LEVEL_DEBUG is not set
# CONFIG_BLUFI_TRACE_LEVEL_VERBOSE is not set
CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
# CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK is not set
CONFIG_SMP_ENABLE=y
CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
CONFIG_ADC2_DISABLE_DAC=y
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_POST_EVENTS_FROM_ISR=y
CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
CONFIG_ESP_SYSTEM_PD_FLASH=y
CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y
2021-04-14 17:10:05 +02:00
# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
CONFIG_ESP32H2_MEMPROT_FEATURE=y
CONFIG_ESP32H2_MEMPROT_FEATURE_LOCK=y
2021-04-14 17:10:05 +02:00
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART=y
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_TASK_WDT=y
# CONFIG_TASK_WDT_PANIC is not set
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=3584
CONFIG_SW_COEXIST_ENABLE=y
# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
CONFIG_MB_TIMER_PORT_ENABLED=y
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0
# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
# CONFIG_L2_TO_L3_COPY is not set
# CONFIG_USE_ONLY_LWIP_SELECT is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=12
CONFIG_TCP_MSS=1440
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=3072
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_PPP_SUPPORT is not set
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_ESP32_PTHREAD_STACK_MIN=768
CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# End of deprecated options