jacob.eva/arduino-esp32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ff18a211e4
arduino-esp32/boards.txt

2798 lines
100 KiB
Plaintext
Raw Normal View History

initial import
2016-10-06 13:21:30 +02:00
menu.UploadSpeed=Upload Speed
CPU and APB Frequency support (#2220) * Add support to HAL for APB frequencies different than 80MHz * Add support for CPU frequencies in the IDE board menu * Switch to fast set_config * Add method to uart so debug can be reassigned after apb frequency switch * Return real APB frequency
2018-12-20 01:57:32 +01:00
menu.CPUFreq=CPU Frequency
initial import
2016-10-06 13:21:30 +02:00
menu.FlashFreq=Flash Frequency
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
menu.FlashMode=Flash Mode
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
menu.FlashSize=Flash Size
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
menu.PartitionScheme=Partition Scheme
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
menu.DebugLevel=Core Debug Level
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
menu.PSRAM=PSRAM
initial import
2016-10-06 13:21:30 +02:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
initial import
2016-10-06 13:21:30 +02:00
esp32.name=ESP32 Dev Module
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
esp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32.upload.maximum_data_size=327680
initial import
2016-10-06 13:21:30 +02:00
esp32.upload.wait_for_upload_port=true
esp32.serial.disableDTR=true
esp32.serial.disableRTS=true
esp32.build.mcu=esp32
esp32.build.core=esp32
esp32.build.variant=esp32
esp32.build.board=ESP32_DEV
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
esp32.build.f_cpu=240000000L
initial import
2016-10-06 13:21:30 +02:00
esp32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.build.flash_freq=40m
Fix some compilation errors
2017-08-01 11:08:38 +02:00
esp32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32.build.defines=
esp32.menu.PSRAM.disabled=Disabled
esp32.menu.PSRAM.disabled.build.defines=
esp32.menu.PSRAM.enabled=Enabled
Add missing flag to fix psram issues Thanks @igrr
2018-07-04 12:11:25 +02:00
esp32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
esp32.menu.PartitionScheme.default=Default
esp32.menu.PartitionScheme.default.build.partitions=default
esp32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
esp32.menu.PartitionScheme.minimal.build.partitions=minimal
esp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379)
2018-05-14 13:03:46 +02:00
esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
Additional partition scheme min_spiffs (#1302) with minimal SPIFFS partition size and OTA support for bigger apps
2018-04-14 09:45:08 +02:00
esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379)
2018-05-14 13:03:46 +02:00
esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
FAT on SPI Flash Library (#1809) * First commit of FFat library * Fixed reboot loops if no fat present. Added CMakeLists * Functionalize the partition checks * Cleanup, especially in format * Dont format if mounted. More wording cleanup * 16M ffat should only be on 16M board * Fix some casting issues that trip up the compiler when building as ESP-IDF component
2018-09-17 23:06:04 +02:00
esp32.menu.PartitionScheme.fatflash=16M Fat
esp32.menu.PartitionScheme.fatflash.build.partitions=ffat
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
CPU and APB Frequency support (#2220) * Add support to HAL for APB frequencies different than 80MHz * Add support for CPU frequencies in the IDE board menu * Switch to fast set_config * Add method to uart so debug can be reassigned after apb frequency switch * Return real APB frequency
2018-12-20 01:57:32 +01:00
esp32.menu.CPUFreq.240=240MHz
esp32.menu.CPUFreq.240.build.f_cpu=240000000L
esp32.menu.CPUFreq.160=160MHz
esp32.menu.CPUFreq.160.build.f_cpu=160000000L
esp32.menu.CPUFreq.80=80MHz
esp32.menu.CPUFreq.80.build.f_cpu=80000000L
esp32.menu.CPUFreq.40=40MHz (40MHz XTAL)
esp32.menu.CPUFreq.40.build.f_cpu=40000000L
esp32.menu.CPUFreq.26=26MHz (26MHz XTAL)
esp32.menu.CPUFreq.26.build.f_cpu=26000000L
esp32.menu.CPUFreq.20=20MHz (40MHz XTAL)
esp32.menu.CPUFreq.20.build.f_cpu=20000000L
esp32.menu.CPUFreq.13=13MHz
esp32.menu.CPUFreq.13.build.f_cpu=13000000L
esp32.menu.CPUFreq.10=10MHz (40MHz XTAL)
esp32.menu.CPUFreq.10.build.f_cpu=10000000L
esp32.menu.CPUFreq.8=8MHz (40MHz XTAL)
esp32.menu.CPUFreq.8.build.f_cpu=8000000L
esp32.menu.CPUFreq.5=5MHz
esp32.menu.CPUFreq.5.build.f_cpu=5000000L
esp32.menu.CPUFreq.4=4MHz
esp32.menu.CPUFreq.4.build.f_cpu=4000000L
esp32.menu.CPUFreq.3=3MHz
esp32.menu.CPUFreq.3.build.f_cpu=3000000L
esp32.menu.CPUFreq.2=2MHz
esp32.menu.CPUFreq.2.build.f_cpu=2000000L
esp32.menu.CPUFreq.1=1MHz
esp32.menu.CPUFreq.1.build.f_cpu=1000000L
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.qio=QIO
esp32.menu.FlashMode.qio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.qio.build.boot=qio
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.dio=DIO
esp32.menu.FlashMode.dio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.dio.build.boot=dio
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.qout=QOUT
esp32.menu.FlashMode.qout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.qout.build.boot=qout
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.dout=DOUT
esp32.menu.FlashMode.dout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.dout.build.boot=dout
initial import
2016-10-06 13:21:30 +02:00
esp32.menu.FlashFreq.80=80MHz
esp32.menu.FlashFreq.80.build.flash_freq=80m
esp32.menu.FlashFreq.40=40MHz
esp32.menu.FlashFreq.40.build.flash_freq=40m
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32.menu.FlashSize.4M=4MB (32Mb)
esp32.menu.FlashSize.4M.build.flash_size=4MB
esp32.menu.FlashSize.2M=2MB (16Mb)
esp32.menu.FlashSize.2M.build.flash_size=2MB
esp32.menu.FlashSize.2M.build.partitions=minimal
FAT on SPI Flash Library (#1809) * First commit of FFat library * Fixed reboot loops if no fat present. Added CMakeLists * Functionalize the partition checks * Cleanup, especially in format * Dont format if mounted. More wording cleanup * 16M ffat should only be on 16M board * Fix some casting issues that trip up the compiler when building as ESP-IDF component
2018-09-17 23:06:04 +02:00
esp32.menu.FlashSize.16M=16MB (128Mb)
esp32.menu.FlashSize.16M.build.flash_size=16MB
esp32.menu.FlashSize.16M.build.partitions=ffat
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
initial import
2016-10-06 13:21:30 +02:00
esp32.menu.UploadSpeed.921600=921600
esp32.menu.UploadSpeed.921600.upload.speed=921600
esp32.menu.UploadSpeed.115200=115200
esp32.menu.UploadSpeed.115200.upload.speed=115200
esp32.menu.UploadSpeed.256000.windows=256000
esp32.menu.UploadSpeed.256000.upload.speed=256000
esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32.menu.UploadSpeed.230400=230400
esp32.menu.UploadSpeed.230400.upload.speed=230400
esp32.menu.UploadSpeed.460800.linux=460800
esp32.menu.UploadSpeed.460800.macosx=460800
esp32.menu.UploadSpeed.460800.upload.speed=460800
esp32.menu.UploadSpeed.512000.windows=512000
esp32.menu.UploadSpeed.512000.upload.speed=512000
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32.menu.DebugLevel.none=None
esp32.menu.DebugLevel.none.build.code_debug=0
esp32.menu.DebugLevel.error=Error
esp32.menu.DebugLevel.error.build.code_debug=1
esp32.menu.DebugLevel.warn=Warn
esp32.menu.DebugLevel.warn.build.code_debug=2
esp32.menu.DebugLevel.info=Info
esp32.menu.DebugLevel.info.build.code_debug=3
esp32.menu.DebugLevel.debug=Debug
esp32.menu.DebugLevel.debug.build.code_debug=4
esp32.menu.DebugLevel.verbose=Verbose
esp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.name=ESP32 Wrover Module
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32wrover.upload.tool=esptool_py
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.upload.maximum_size=1310720
esp32wrover.upload.maximum_data_size=327680
esp32wrover.upload.wait_for_upload_port=true
esp32wrover.serial.disableDTR=true
esp32wrover.serial.disableRTS=true
esp32wrover.build.mcu=esp32
esp32wrover.build.core=esp32
esp32wrover.build.variant=esp32
esp32wrover.build.board=ESP32_DEV
esp32wrover.build.f_cpu=240000000L
esp32wrover.build.flash_size=4MB
esp32wrover.build.flash_freq=40m
esp32wrover.build.flash_mode=dio
esp32wrover.build.boot=dio
esp32wrover.build.partitions=default
Add missing flag to fix psram issues Thanks @igrr
2018-07-04 12:11:25 +02:00
esp32wrover.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.menu.PartitionScheme.default=Default
esp32wrover.menu.PartitionScheme.default.build.partitions=default
esp32wrover.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
esp32wrover.menu.PartitionScheme.minimal.build.partitions=minimal
esp32wrover.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32wrover.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32wrover.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32wrover.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32wrover.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32wrover.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
esp32wrover.menu.FlashMode.qio=QIO
esp32wrover.menu.FlashMode.qio.build.flash_mode=dio
esp32wrover.menu.FlashMode.qio.build.boot=qio
esp32wrover.menu.FlashMode.dio=DIO
esp32wrover.menu.FlashMode.dio.build.flash_mode=dio
esp32wrover.menu.FlashMode.dio.build.boot=dio
esp32wrover.menu.FlashMode.qout=QOUT
esp32wrover.menu.FlashMode.qout.build.flash_mode=dout
esp32wrover.menu.FlashMode.qout.build.boot=qout
esp32wrover.menu.FlashMode.dout=DOUT
esp32wrover.menu.FlashMode.dout.build.flash_mode=dout
esp32wrover.menu.FlashMode.dout.build.boot=dout
esp32wrover.menu.FlashFreq.80=80MHz
esp32wrover.menu.FlashFreq.80.build.flash_freq=80m
esp32wrover.menu.FlashFreq.40=40MHz
esp32wrover.menu.FlashFreq.40.build.flash_freq=40m
esp32wrover.menu.UploadSpeed.921600=921600
esp32wrover.menu.UploadSpeed.921600.upload.speed=921600
esp32wrover.menu.UploadSpeed.115200=115200
esp32wrover.menu.UploadSpeed.115200.upload.speed=115200
esp32wrover.menu.UploadSpeed.256000.windows=256000
esp32wrover.menu.UploadSpeed.256000.upload.speed=256000
esp32wrover.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32wrover.menu.UploadSpeed.230400=230400
esp32wrover.menu.UploadSpeed.230400.upload.speed=230400
esp32wrover.menu.UploadSpeed.460800.linux=460800
esp32wrover.menu.UploadSpeed.460800.macosx=460800
esp32wrover.menu.UploadSpeed.460800.upload.speed=460800
esp32wrover.menu.UploadSpeed.512000.windows=512000
esp32wrover.menu.UploadSpeed.512000.upload.speed=512000
esp32wrover.menu.DebugLevel.none=None
esp32wrover.menu.DebugLevel.none.build.code_debug=0
esp32wrover.menu.DebugLevel.error=Error
esp32wrover.menu.DebugLevel.error.build.code_debug=1
esp32wrover.menu.DebugLevel.warn=Warn
esp32wrover.menu.DebugLevel.warn.build.code_debug=2
esp32wrover.menu.DebugLevel.info=Info
esp32wrover.menu.DebugLevel.info.build.code_debug=3
esp32wrover.menu.DebugLevel.debug=Debug
esp32wrover.menu.DebugLevel.debug.build.code_debug=4
esp32wrover.menu.DebugLevel.verbose=Verbose
esp32wrover.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.name=ESP32 Pico Kit
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
pico32.upload.tool=esptool_py
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
pico32.upload.maximum_data_size=327680
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.upload.wait_for_upload_port=true
pico32.serial.disableDTR=true
pico32.serial.disableRTS=true
pico32.build.mcu=esp32
pico32.build.core=esp32
pico32.build.variant=pico32
pico32.build.board=ESP32_PICO
pico32.build.f_cpu=240000000L
pico32.build.flash_size=4MB
pico32.build.flash_freq=80m
Corrected Flash Mode (#1205) Changed Flashmode to DIO due board only supports DIO
2018-04-14 09:48:10 +02:00
pico32.build.flash_mode=dio
pico32.build.boot=dio
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
pico32.build.defines=
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.menu.UploadSpeed.921600=921600
pico32.menu.UploadSpeed.921600.upload.speed=921600
pico32.menu.UploadSpeed.115200=115200
pico32.menu.UploadSpeed.115200.upload.speed=115200
pico32.menu.UploadSpeed.256000.windows=256000
pico32.menu.UploadSpeed.256000.upload.speed=256000
pico32.menu.UploadSpeed.230400.windows.upload.speed=256000
pico32.menu.UploadSpeed.230400=230400
pico32.menu.UploadSpeed.230400.upload.speed=230400
pico32.menu.UploadSpeed.460800.linux=460800
pico32.menu.UploadSpeed.460800.macosx=460800
pico32.menu.UploadSpeed.460800.upload.speed=460800
pico32.menu.UploadSpeed.512000.windows=512000
pico32.menu.UploadSpeed.512000.upload.speed=512000
pico32.menu.DebugLevel.none=None
pico32.menu.DebugLevel.none.build.code_debug=0
pico32.menu.DebugLevel.error=Error
pico32.menu.DebugLevel.error.build.code_debug=1
pico32.menu.DebugLevel.warn=Warn
pico32.menu.DebugLevel.warn.build.code_debug=2
pico32.menu.DebugLevel.info=Info
pico32.menu.DebugLevel.info.build.code_debug=3
pico32.menu.DebugLevel.debug=Debug
pico32.menu.DebugLevel.debug.build.code_debug=4
pico32.menu.DebugLevel.verbose=Verbose
pico32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Turta IoT Node Board (#2208)
2018-12-17 23:11:05 +01:00
turta_iot_node.name=Turta IoT Node
turta_iot_node.upload.tool=esptool_py
turta_iot_node.upload.maximum_size=1310720
turta_iot_node.upload.maximum_data_size=327680
turta_iot_node.upload.wait_for_upload_port=true
turta_iot_node.serial.disableDTR=true
turta_iot_node.serial.disableRTS=true
turta_iot_node.build.mcu=esp32
turta_iot_node.build.core=esp32
turta_iot_node.build.variant=pico32
turta_iot_node.build.board=ESP32_PICO
turta_iot_node.build.f_cpu=240000000L
turta_iot_node.build.flash_size=4MB
turta_iot_node.build.flash_freq=80m
turta_iot_node.build.flash_mode=dio
turta_iot_node.build.boot=dio
turta_iot_node.build.partitions=default
turta_iot_node.build.defines=
turta_iot_node.menu.UploadSpeed.921600=921600
turta_iot_node.menu.UploadSpeed.921600.upload.speed=921600
turta_iot_node.menu.UploadSpeed.115200=115200
turta_iot_node.menu.UploadSpeed.115200.upload.speed=115200
turta_iot_node.menu.DebugLevel.none=None
turta_iot_node.menu.DebugLevel.none.build.code_debug=0
turta_iot_node.menu.DebugLevel.error=Error
turta_iot_node.menu.DebugLevel.error.build.code_debug=1
turta_iot_node.menu.DebugLevel.warn=Warn
turta_iot_node.menu.DebugLevel.warn.build.code_debug=2
turta_iot_node.menu.DebugLevel.info=Info
turta_iot_node.menu.DebugLevel.info.build.code_debug=3
turta_iot_node.menu.DebugLevel.debug=Debug
turta_iot_node.menu.DebugLevel.debug.build.code_debug=4
turta_iot_node.menu.DebugLevel.verbose=Verbose
turta_iot_node.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
ttgo-lora32-v1.name=TTGO LoRa32-OLED V1
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
ttgo-lora32-v1.upload.tool=esptool_py
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
ttgo-lora32-v1.upload.maximum_size=1310720
ttgo-lora32-v1.upload.maximum_data_size=294912
ttgo-lora32-v1.upload.wait_for_upload_port=true
ttgo-lora32-v1.serial.disableDTR=true
ttgo-lora32-v1.serial.disableRTS=true
ttgo-lora32-v1.build.mcu=esp32
ttgo-lora32-v1.build.core=esp32
ttgo-lora32-v1.build.variant=ttgo-lora32-v1
ttgo-lora32-v1.build.board=TTGO_LoRa32_V1
ttgo-lora32-v1.build.f_cpu=240000000L
ttgo-lora32-v1.build.flash_mode=dio
ttgo-lora32-v1.build.flash_size=4MB
ttgo-lora32-v1.build.boot=dio
ttgo-lora32-v1.build.partitions=default
ttgo-lora32-v1.menu.FlashFreq.80=80MHz
ttgo-lora32-v1.menu.FlashFreq.80.build.flash_freq=80m
ttgo-lora32-v1.menu.FlashFreq.40=40MHz
ttgo-lora32-v1.menu.FlashFreq.40.build.flash_freq=40m
ttgo-lora32-v1.menu.UploadSpeed.921600=921600
ttgo-lora32-v1.menu.UploadSpeed.921600.upload.speed=921600
ttgo-lora32-v1.menu.UploadSpeed.115200=115200
ttgo-lora32-v1.menu.UploadSpeed.115200.upload.speed=115200
ttgo-lora32-v1.menu.UploadSpeed.256000.windows=256000
ttgo-lora32-v1.menu.UploadSpeed.256000.upload.speed=256000
ttgo-lora32-v1.menu.UploadSpeed.230400.windows.upload.speed=256000
ttgo-lora32-v1.menu.UploadSpeed.230400=230400
ttgo-lora32-v1.menu.UploadSpeed.230400.upload.speed=230400
ttgo-lora32-v1.menu.UploadSpeed.460800.linux=460800
ttgo-lora32-v1.menu.UploadSpeed.460800.macosx=460800
ttgo-lora32-v1.menu.UploadSpeed.460800.upload.speed=460800
ttgo-lora32-v1.menu.UploadSpeed.512000.windows=512000
ttgo-lora32-v1.menu.UploadSpeed.512000.upload.speed=512000
ttgo-lora32-v1.menu.DebugLevel.none=None
ttgo-lora32-v1.menu.DebugLevel.none.build.code_debug=0
ttgo-lora32-v1.menu.DebugLevel.error=Error
ttgo-lora32-v1.menu.DebugLevel.error.build.code_debug=1
ttgo-lora32-v1.menu.DebugLevel.warn=Warn
ttgo-lora32-v1.menu.DebugLevel.warn.build.code_debug=2
ttgo-lora32-v1.menu.DebugLevel.info=Info
ttgo-lora32-v1.menu.DebugLevel.info.build.code_debug=3
ttgo-lora32-v1.menu.DebugLevel.debug=Debug
ttgo-lora32-v1.menu.DebugLevel.debug.build.code_debug=4
ttgo-lora32-v1.menu.DebugLevel.verbose=Verbose
ttgo-lora32-v1.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
cw02.name=XinaBox CW02
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
cw02.upload.tool=esptool_py
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
cw02.upload.maximum_size=1310720
cw02.upload.maximum_data_size=294912
cw02.upload.wait_for_upload_port=true
cw02.serial.disableDTR=true
cw02.serial.disableRTS=true
cw02.build.mcu=esp32
cw02.build.core=esp32
cw02.build.variant=xinabox
cw02.build.board=ESP32_DEV
cw02.build.f_cpu=240000000L
cw02.build.flash_size=4MB
cw02.build.flash_freq=40m
cw02.build.flash_mode=dio
cw02.build.boot=dio
cw02.build.partitions=default
cw02.menu.FlashMode.qio=QIO
cw02.menu.FlashMode.qio.build.flash_mode=dio
cw02.menu.FlashMode.qio.build.boot=qio
cw02.menu.FlashMode.dio=DIO
cw02.menu.FlashMode.dio.build.flash_mode=dio
cw02.menu.FlashMode.dio.build.boot=dio
cw02.menu.FlashMode.qout=QOUT
cw02.menu.FlashMode.qout.build.flash_mode=dout
cw02.menu.FlashMode.qout.build.boot=qout
cw02.menu.FlashMode.dout=DOUT
cw02.menu.FlashMode.dout.build.flash_mode=dout
cw02.menu.FlashMode.dout.build.boot=dout
cw02.menu.FlashFreq.80=80MHz
cw02.menu.FlashFreq.80.build.flash_freq=80m
cw02.menu.FlashFreq.40=40MHz
cw02.menu.FlashFreq.40.build.flash_freq=40m
cw02.menu.FlashSize.4M=4MB (32Mb)
cw02.menu.FlashSize.4M.build.flash_size=4MB
cw02.menu.FlashSize.2M=2MB (16Mb)
cw02.menu.FlashSize.2M.build.flash_size=2MB
cw02.menu.FlashSize.2M.build.partitions=minimal
cw02.menu.UploadSpeed.921600=921600
cw02.menu.UploadSpeed.921600.upload.speed=921600
cw02.menu.UploadSpeed.115200=115200
cw02.menu.UploadSpeed.115200.upload.speed=115200
cw02.menu.UploadSpeed.256000.windows=256000
cw02.menu.UploadSpeed.256000.upload.speed=256000
cw02.menu.UploadSpeed.230400.windows.upload.speed=256000
cw02.menu.UploadSpeed.230400=230400
cw02.menu.UploadSpeed.230400.upload.speed=230400
cw02.menu.UploadSpeed.460800.linux=460800
cw02.menu.UploadSpeed.460800.macosx=460800
cw02.menu.UploadSpeed.460800.upload.speed=460800
cw02.menu.UploadSpeed.512000.windows=512000
cw02.menu.UploadSpeed.512000.upload.speed=512000
cw02.menu.DebugLevel.none=None
cw02.menu.DebugLevel.none.build.code_debug=0
cw02.menu.DebugLevel.error=Error
cw02.menu.DebugLevel.error.build.code_debug=1
cw02.menu.DebugLevel.warn=Warn
cw02.menu.DebugLevel.warn.build.code_debug=2
cw02.menu.DebugLevel.info=Info
cw02.menu.DebugLevel.info.build.code_debug=3
cw02.menu.DebugLevel.debug=Debug
cw02.menu.DebugLevel.debug.build.code_debug=4
cw02.menu.DebugLevel.verbose=Verbose
cw02.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.name=SparkFun ESP32 Thing
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32thing.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
esp32thing.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32thing.upload.maximum_data_size=327680
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.upload.wait_for_upload_port=true
esp32thing.serial.disableDTR=true
esp32thing.serial.disableRTS=true
esp32thing.build.mcu=esp32
esp32thing.build.core=esp32
esp32thing.build.variant=esp32thing
esp32thing.build.board=ESP32_THING
esp32thing.build.f_cpu=240000000L
esp32thing.build.flash_mode=dio
esp32thing.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32thing.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32thing.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32thing.build.defines=
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.menu.FlashFreq.80=80MHz
esp32thing.menu.FlashFreq.80.build.flash_freq=80m
esp32thing.menu.FlashFreq.40=40MHz
esp32thing.menu.FlashFreq.40.build.flash_freq=40m
Updating Boart.txt ESP32Thing in PartitionScheme and DebugLevel (#1860)
2018-09-17 21:12:15 +02:00
esp32thing.menu.PartitionScheme.default=Default
esp32thing.menu.PartitionScheme.default.build.partitions=default
esp32thing.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32thing.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32thing.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32thing.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32thing.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32thing.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.menu.UploadSpeed.921600=921600
esp32thing.menu.UploadSpeed.921600.upload.speed=921600
esp32thing.menu.UploadSpeed.115200=115200
esp32thing.menu.UploadSpeed.115200.upload.speed=115200
esp32thing.menu.UploadSpeed.256000.windows=256000
esp32thing.menu.UploadSpeed.256000.upload.speed=256000
esp32thing.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32thing.menu.UploadSpeed.230400=230400
esp32thing.menu.UploadSpeed.230400.upload.speed=230400
esp32thing.menu.UploadSpeed.460800.linux=460800
esp32thing.menu.UploadSpeed.460800.macosx=460800
esp32thing.menu.UploadSpeed.460800.upload.speed=460800
esp32thing.menu.UploadSpeed.512000.windows=512000
esp32thing.menu.UploadSpeed.512000.upload.speed=512000
Updating Boart.txt ESP32Thing in PartitionScheme and DebugLevel (#1860)
2018-09-17 21:12:15 +02:00
esp32thing.menu.DebugLevel.none=None
esp32thing.menu.DebugLevel.none.build.code_debug=0
esp32thing.menu.DebugLevel.error=Error
esp32thing.menu.DebugLevel.error.build.code_debug=1
esp32thing.menu.DebugLevel.warn=Warn
esp32thing.menu.DebugLevel.warn.build.code_debug=2
esp32thing.menu.DebugLevel.info=Info
esp32thing.menu.DebugLevel.info.build.code_debug=3
esp32thing.menu.DebugLevel.debug=Debug
esp32thing.menu.DebugLevel.debug.build.code_debug=4
esp32thing.menu.DebugLevel.verbose=Verbose
esp32thing.menu.DebugLevel.verbose.build.code_debug=5
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.name=u-blox NINA-W10 series (ESP32)
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
nina_w10.upload.tool=esptool_py
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
nina_w10.upload.maximum_data_size=327680
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.upload.wait_for_upload_port=true
nina_w10.serial.disableDTR=true
nina_w10.serial.disableRTS=true
nina_w10.build.mcu=esp32
nina_w10.build.core=esp32
nina_w10.build.variant=nina_w10
nina_w10.build.board=UBLOX_NINA_W10
nina_w10.build.f_cpu=240000000L
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
nina_w10.build.boot=dio
adjust partitions for 2MB (#780) use minimal partitions
2017-10-30 10:29:11 +01:00
nina_w10.build.partitions=minimal
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.build.flash_mode=dio
nina_w10.build.flash_size=2MB
nina_w10.build.flash_freq=40m
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
nina_w10.build.defines=
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.menu.UploadSpeed.921600=921600
nina_w10.menu.UploadSpeed.921600.upload.speed=921600
nina_w10.menu.UploadSpeed.115200=115200
nina_w10.menu.UploadSpeed.115200.upload.speed=115200
nina_w10.menu.UploadSpeed.256000.windows=256000
nina_w10.menu.UploadSpeed.256000.upload.speed=256000
nina_w10.menu.UploadSpeed.230400.windows.upload.speed=256000
nina_w10.menu.UploadSpeed.230400=230400
nina_w10.menu.UploadSpeed.230400.upload.speed=230400
nina_w10.menu.UploadSpeed.460800.linux=460800
nina_w10.menu.UploadSpeed.460800.macosx=460800
nina_w10.menu.UploadSpeed.460800.upload.speed=460800
nina_w10.menu.UploadSpeed.512000.windows=512000
nina_w10.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
widora-air.name=Widora AIR
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
widora-air.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
widora-air.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
widora-air.upload.maximum_data_size=327680
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
widora-air.upload.wait_for_upload_port=true
widora-air.serial.disableDTR=true
widora-air.serial.disableRTS=true
widora-air.build.mcu=esp32
widora-air.build.core=esp32
widora-air.build.variant=widora-air
widora-air.build.board=WIDORA_AIR
widora-air.build.f_cpu=240000000L
widora-air.build.flash_mode=dio
widora-air.build.flash_size=16MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
widora-air.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
widora-air.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
widora-air.build.defines=
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
widora-air.menu.FlashFreq.80=80MHz
widora-air.menu.FlashFreq.80.build.flash_freq=80m
widora-air.menu.FlashFreq.40=40MHz
widora-air.menu.FlashFreq.40.build.flash_freq=40m
widora-air.menu.UploadSpeed.921600=921600
widora-air.menu.UploadSpeed.921600.upload.speed=921600
widora-air.menu.UploadSpeed.115200=115200
widora-air.menu.UploadSpeed.115200.upload.speed=115200
widora-air.menu.UploadSpeed.256000.windows=256000
widora-air.menu.UploadSpeed.256000.upload.speed=256000
widora-air.menu.UploadSpeed.230400.windows.upload.speed=256000
widora-air.menu.UploadSpeed.230400=230400
widora-air.menu.UploadSpeed.230400.upload.speed=230400
widora-air.menu.UploadSpeed.460800.linux=460800
widora-air.menu.UploadSpeed.460800.macosx=460800
widora-air.menu.UploadSpeed.460800.upload.speed=460800
widora-air.menu.UploadSpeed.512000.windows=512000
widora-air.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.name=Electronic SweetPeas - ESP320
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp320.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
esp320.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp320.upload.maximum_data_size=327680
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.upload.wait_for_upload_port=true
esp320.serial.disableDTR=true
esp320.serial.disableRTS=true
esp320.build.mcu=esp32
esp320.build.core=esp32
esp320.build.variant=esp320
esp320.build.board=ESP320
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
esp320.build.f_cpu=240000000L
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.build.flash_mode=qio
esp320.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp320.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp320.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp320.build.defines=
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.menu.FlashFreq.80=80MHz
esp320.menu.FlashFreq.80.build.flash_freq=80m
esp320.menu.FlashFreq.40=40MHz
esp320.menu.FlashFreq.40.build.flash_freq=40m
esp320.menu.UploadSpeed.921600=921600
esp320.menu.UploadSpeed.921600.upload.speed=921600
esp320.menu.UploadSpeed.115200=115200
esp320.menu.UploadSpeed.115200.upload.speed=115200
esp320.menu.UploadSpeed.256000.windows=256000
esp320.menu.UploadSpeed.256000.upload.speed=256000
esp320.menu.UploadSpeed.230400.windows.upload.speed=256000
esp320.menu.UploadSpeed.230400=230400
esp320.menu.UploadSpeed.230400.upload.speed=230400
esp320.menu.UploadSpeed.460800.linux=460800
esp320.menu.UploadSpeed.460800.macosx=460800
esp320.menu.UploadSpeed.460800.upload.speed=460800
esp320.menu.UploadSpeed.512000.windows=512000
esp320.menu.UploadSpeed.512000.upload.speed=512000
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.name=Nano32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
nano32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
nano32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
nano32.upload.maximum_data_size=327680
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.upload.wait_for_upload_port=true
nano32.serial.disableDTR=true
nano32.serial.disableRTS=true
nano32.build.mcu=esp32
nano32.build.core=esp32
nano32.build.variant=nano32
nano32.build.board=NANO32
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
nano32.build.f_cpu=240000000L
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.build.flash_mode=dio
nano32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
nano32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
nano32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
nano32.build.defines=
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.menu.FlashFreq.80=80MHz
nano32.menu.FlashFreq.80.build.flash_freq=80m
nano32.menu.FlashFreq.40=40MHz
nano32.menu.FlashFreq.40.build.flash_freq=40m
nano32.menu.UploadSpeed.921600=921600
nano32.menu.UploadSpeed.921600.upload.speed=921600
nano32.menu.UploadSpeed.115200=115200
nano32.menu.UploadSpeed.115200.upload.speed=115200
nano32.menu.UploadSpeed.256000.windows=256000
nano32.menu.UploadSpeed.256000.upload.speed=256000
nano32.menu.UploadSpeed.230400.windows.upload.speed=256000
nano32.menu.UploadSpeed.230400=230400
nano32.menu.UploadSpeed.230400.upload.speed=230400
nano32.menu.UploadSpeed.460800.linux=460800
nano32.menu.UploadSpeed.460800.macosx=460800
nano32.menu.UploadSpeed.460800.upload.speed=460800
nano32.menu.UploadSpeed.512000.windows=512000
nano32.menu.UploadSpeed.512000.upload.speed=512000
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
##############################################################
add LOLIN D32 & D32 PRO Board support (#1688)
2018-07-28 09:27:26 +02:00
d32.name=LOLIN D32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
d32.upload.tool=esptool_py
add LOLIN D32 & D32 PRO Board support (#1688)
2018-07-28 09:27:26 +02:00
d32.upload.maximum_size=1310720
d32.upload.maximum_data_size=327680
d32.upload.wait_for_upload_port=true
d32.serial.disableDTR=true
d32.serial.disableRTS=true
d32.build.mcu=esp32
d32.build.core=esp32
d32.build.variant=d32
d32.build.board=LOLIN_D32
d32.build.f_cpu=240000000L
d32.build.flash_size=4MB
d32.build.flash_freq=40m
d32.build.flash_mode=dio
d32.build.boot=dio
d32.build.partitions=default
d32.build.defines=
d32.menu.PartitionScheme.default=Default
d32.menu.PartitionScheme.default.build.partitions=default
d32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
d32.menu.PartitionScheme.minimal.build.partitions=minimal
d32.menu.PartitionScheme.no_ota=No OTA (Large APP)
d32.menu.PartitionScheme.no_ota.build.partitions=no_ota
d32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
d32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
d32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
d32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
d32.menu.FlashFreq.80=80MHz
d32.menu.FlashFreq.80.build.flash_freq=80m
d32.menu.FlashFreq.40=40MHz
d32.menu.FlashFreq.40.build.flash_freq=40m
d32.menu.UploadSpeed.921600=921600
d32.menu.UploadSpeed.921600.upload.speed=921600
d32.menu.UploadSpeed.115200=115200
d32.menu.UploadSpeed.115200.upload.speed=115200
d32.menu.UploadSpeed.256000.windows=256000
d32.menu.UploadSpeed.256000.upload.speed=256000
d32.menu.UploadSpeed.230400.windows.upload.speed=256000
d32.menu.UploadSpeed.230400=230400
d32.menu.UploadSpeed.230400.upload.speed=230400
d32.menu.UploadSpeed.460800.linux=460800
d32.menu.UploadSpeed.460800.macosx=460800
d32.menu.UploadSpeed.460800.upload.speed=460800
d32.menu.UploadSpeed.512000.windows=512000
d32.menu.UploadSpeed.512000.upload.speed=512000
d32.menu.DebugLevel.none=None
d32.menu.DebugLevel.none.build.code_debug=0
d32.menu.DebugLevel.error=Error
d32.menu.DebugLevel.error.build.code_debug=1
d32.menu.DebugLevel.warn=Warn
d32.menu.DebugLevel.warn.build.code_debug=2
d32.menu.DebugLevel.info=Info
d32.menu.DebugLevel.info.build.code_debug=3
d32.menu.DebugLevel.debug=Debug
d32.menu.DebugLevel.debug.build.code_debug=4
d32.menu.DebugLevel.verbose=Verbose
d32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
d32_pro.name=LOLIN D32 PRO
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
d32_pro.upload.tool=esptool_py
add LOLIN D32 & D32 PRO Board support (#1688)
2018-07-28 09:27:26 +02:00
d32_pro.upload.maximum_size=1310720
d32_pro.upload.maximum_data_size=327680
d32_pro.upload.wait_for_upload_port=true
d32_pro.serial.disableDTR=true
d32_pro.serial.disableRTS=true
d32_pro.build.mcu=esp32
d32_pro.build.core=esp32
d32_pro.build.variant=d32_pro
d32_pro.build.board=LOLIN_D32_PRO
d32_pro.build.f_cpu=240000000L
d32_pro.build.flash_size=4MB
d32_pro.build.flash_freq=40m
d32_pro.build.flash_mode=dio
d32_pro.build.boot=dio
d32_pro.build.partitions=default
d32_pro.build.defines=
d32_pro.menu.PSRAM.disabled=Disabled
d32_pro.menu.PSRAM.disabled.build.defines=
d32_pro.menu.PSRAM.enabled=Enabled
d32_pro.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
d32_pro.menu.PartitionScheme.default=Default
d32_pro.menu.PartitionScheme.default.build.partitions=default
d32_pro.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
d32_pro.menu.PartitionScheme.minimal.build.partitions=minimal
d32_pro.menu.PartitionScheme.no_ota=No OTA (Large APP)
d32_pro.menu.PartitionScheme.no_ota.build.partitions=no_ota
d32_pro.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
d32_pro.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
d32_pro.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
d32_pro.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
d32_pro.menu.FlashFreq.80=80MHz
d32_pro.menu.FlashFreq.80.build.flash_freq=80m
d32_pro.menu.FlashFreq.40=40MHz
d32_pro.menu.FlashFreq.40.build.flash_freq=40m
d32_pro.menu.UploadSpeed.921600=921600
d32_pro.menu.UploadSpeed.921600.upload.speed=921600
d32_pro.menu.UploadSpeed.115200=115200
d32_pro.menu.UploadSpeed.115200.upload.speed=115200
d32_pro.menu.UploadSpeed.256000.windows=256000
d32_pro.menu.UploadSpeed.256000.upload.speed=256000
d32_pro.menu.UploadSpeed.230400.windows.upload.speed=256000
d32_pro.menu.UploadSpeed.230400=230400
d32_pro.menu.UploadSpeed.230400.upload.speed=230400
d32_pro.menu.UploadSpeed.460800.linux=460800
d32_pro.menu.UploadSpeed.460800.macosx=460800
d32_pro.menu.UploadSpeed.460800.upload.speed=460800
d32_pro.menu.UploadSpeed.512000.windows=512000
d32_pro.menu.UploadSpeed.512000.upload.speed=512000
d32_pro.menu.DebugLevel.none=None
d32_pro.menu.DebugLevel.none.build.code_debug=0
d32_pro.menu.DebugLevel.error=Error
d32_pro.menu.DebugLevel.error.build.code_debug=1
d32_pro.menu.DebugLevel.warn=Warn
d32_pro.menu.DebugLevel.warn.build.code_debug=2
d32_pro.menu.DebugLevel.info=Info
d32_pro.menu.DebugLevel.info.build.code_debug=3
d32_pro.menu.DebugLevel.debug=Debug
d32_pro.menu.DebugLevel.debug.build.code_debug=4
d32_pro.menu.DebugLevel.verbose=Verbose
d32_pro.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Update LED_BUILTIN pin for LOLIN32 (#362) * Add ESP.getChipId() function to get ESP32's ChipID. * change getChipId() to getEfuseMac() * * Change board:Lolin32 to LOLIN32 * Update LED_BUILTIN pin for LOLIN32
2017-05-08 11:47:37 +02:00
lolin32.name=WEMOS LOLIN32
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
lolin32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
lolin32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
lolin32.upload.maximum_data_size=327680
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.upload.wait_for_upload_port=true
lolin32.serial.disableDTR=true
lolin32.serial.disableRTS=true
lolin32.build.mcu=esp32
lolin32.build.core=esp32
lolin32.build.variant=lolin32
Update LED_BUILTIN pin for LOLIN32 (#362) * Add ESP.getChipId() function to get ESP32's ChipID. * change getChipId() to getEfuseMac() * * Change board:Lolin32 to LOLIN32 * Update LED_BUILTIN pin for LOLIN32
2017-05-08 11:47:37 +02:00
lolin32.build.board=LOLIN32
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
lolin32.build.f_cpu=240000000L
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.build.flash_mode=dio
lolin32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
lolin32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
lolin32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
lolin32.build.defines=
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.menu.FlashFreq.80=80MHz
lolin32.menu.FlashFreq.80.build.flash_freq=80m
lolin32.menu.FlashFreq.40=40MHz
lolin32.menu.FlashFreq.40.build.flash_freq=40m
Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379)
2018-05-14 13:03:46 +02:00
lolin32.menu.PartitionScheme.default=Default
lolin32.menu.PartitionScheme.default.build.partitions=default
lolin32.menu.PartitionScheme.no_ota=No OTA (Large APP)
lolin32.menu.PartitionScheme.no_ota.build.partitions=no_ota
lolin32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
lolin32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
lolin32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
lolin32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.menu.UploadSpeed.921600=921600
lolin32.menu.UploadSpeed.921600.upload.speed=921600
lolin32.menu.UploadSpeed.115200=115200
lolin32.menu.UploadSpeed.115200.upload.speed=115200
lolin32.menu.UploadSpeed.256000.windows=256000
lolin32.menu.UploadSpeed.256000.upload.speed=256000
lolin32.menu.UploadSpeed.230400.windows.upload.speed=256000
lolin32.menu.UploadSpeed.230400=230400
lolin32.menu.UploadSpeed.230400.upload.speed=230400
lolin32.menu.UploadSpeed.460800.linux=460800
lolin32.menu.UploadSpeed.460800.macosx=460800
lolin32.menu.UploadSpeed.460800.upload.speed=460800
lolin32.menu.UploadSpeed.512000.windows=512000
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
lolin32.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.name=Dongsen Tech Pocket 32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
pocket_32.upload.tool=esptool_py
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
pocket_32.upload.maximum_data_size=327680
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.upload.wait_for_upload_port=true
pocket_32.serial.disableDTR=true
pocket_32.serial.disableRTS=true
pocket_32.build.mcu=esp32
pocket_32.build.core=esp32
pocket_32.build.variant=pocket_32
pocket_32.build.board=Pocket32
pocket_32.build.f_cpu=240000000L
pocket_32.build.flash_mode=dio
pocket_32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
pocket_32.build.boot=dio
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
pocket_32.build.defines=
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.menu.FlashFreq.80=80MHz
pocket_32.menu.FlashFreq.80.build.flash_freq=80m
pocket_32.menu.FlashFreq.40=40MHz
pocket_32.menu.FlashFreq.40.build.flash_freq=40m
pocket_32.menu.UploadSpeed.921600=921600
pocket_32.menu.UploadSpeed.921600.upload.speed=921600
pocket_32.menu.UploadSpeed.115200=115200
pocket_32.menu.UploadSpeed.115200.upload.speed=115200
pocket_32.menu.UploadSpeed.256000.windows=256000
pocket_32.menu.UploadSpeed.256000.upload.speed=256000
pocket_32.menu.UploadSpeed.230400.windows.upload.speed=256000
pocket_32.menu.UploadSpeed.230400=230400
pocket_32.menu.UploadSpeed.230400.upload.speed=230400
pocket_32.menu.UploadSpeed.460800.linux=460800
pocket_32.menu.UploadSpeed.460800.macosx=460800
pocket_32.menu.UploadSpeed.460800.upload.speed=460800
pocket_32.menu.UploadSpeed.512000.windows=512000
pocket_32.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
WeMosBat.name="WeMos" WiFi&Bluetooth Battery
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
WeMosBat.upload.tool=esptool_py
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
WeMosBat.upload.maximum_data_size=327680
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.upload.wait_for_upload_port=true
WeMosBat.serial.disableDTR=true
WeMosBat.serial.disableRTS=true
WeMosBat.build.mcu=esp32
WeMosBat.build.core=esp32
WeMosBat.build.variant=pocket_32
WeMosBat.build.board=Pocket32
WeMosBat.build.f_cpu=240000000L
WeMosBat.build.flash_mode=dio
WeMosBat.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
WeMosBat.build.boot=dio
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
WeMosBat.build.defines=
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.menu.FlashFreq.80=80MHz
WeMosBat.menu.FlashFreq.80.build.flash_freq=80m
WeMosBat.menu.FlashFreq.40=40MHz
WeMosBat.menu.FlashFreq.40.build.flash_freq=40m
WeMosBat.menu.UploadSpeed.921600=921600
WeMosBat.menu.UploadSpeed.921600.upload.speed=921600
WeMosBat.menu.UploadSpeed.115200=115200
WeMosBat.menu.UploadSpeed.115200.upload.speed=115200
WeMosBat.menu.UploadSpeed.256000.windows=256000
WeMosBat.menu.UploadSpeed.256000.upload.speed=256000
WeMosBat.menu.UploadSpeed.230400.windows.upload.speed=256000
WeMosBat.menu.UploadSpeed.230400=230400
WeMosBat.menu.UploadSpeed.230400.upload.speed=230400
WeMosBat.menu.UploadSpeed.460800.linux=460800
WeMosBat.menu.UploadSpeed.460800.macosx=460800
WeMosBat.menu.UploadSpeed.460800.upload.speed=460800
WeMosBat.menu.UploadSpeed.512000.windows=512000
WeMosBat.menu.UploadSpeed.512000.upload.speed=512000
Add Core Debug Level for WeMosBat (#1222) Should we add this declaration option for all boards?
2018-04-06 18:09:19 +02:00
WeMosBat.menu.DebugLevel.none=None
WeMosBat.menu.DebugLevel.none.build.code_debug=0
WeMosBat.menu.DebugLevel.error=Error
WeMosBat.menu.DebugLevel.error.build.code_debug=1
WeMosBat.menu.DebugLevel.warn=Warn
WeMosBat.menu.DebugLevel.warn.build.code_debug=2
WeMosBat.menu.DebugLevel.info=Info
WeMosBat.menu.DebugLevel.info.build.code_debug=3
WeMosBat.menu.DebugLevel.debug=Debug
WeMosBat.menu.DebugLevel.debug.build.code_debug=4
WeMosBat.menu.DebugLevel.verbose=Verbose
WeMosBat.menu.DebugLevel.verbose.build.code_debug=5
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
##############################################################
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.name=ESPea32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
espea32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
espea32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
espea32.upload.maximum_data_size=327680
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.upload.wait_for_upload_port=true
espea32.serial.disableDTR=true
espea32.serial.disableRTS=true
espea32.build.mcu=esp32
espea32.build.core=esp32
espea32.build.variant=espea32
espea32.build.board=ESPea32
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
espea32.build.f_cpu=240000000L
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.build.flash_mode=dio
espea32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espea32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
espea32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
espea32.build.defines=
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.menu.FlashFreq.80=80MHz
espea32.menu.FlashFreq.80.build.flash_freq=80m
espea32.menu.FlashFreq.40=40MHz
espea32.menu.FlashFreq.40.build.flash_freq=40m
espea32.menu.UploadSpeed.921600=921600
espea32.menu.UploadSpeed.921600.upload.speed=921600
espea32.menu.UploadSpeed.115200=115200
espea32.menu.UploadSpeed.115200.upload.speed=115200
espea32.menu.UploadSpeed.256000.windows=256000
espea32.menu.UploadSpeed.256000.upload.speed=256000
espea32.menu.UploadSpeed.230400.windows.upload.speed=256000
espea32.menu.UploadSpeed.230400=230400
espea32.menu.UploadSpeed.230400.upload.speed=230400
espea32.menu.UploadSpeed.460800.linux=460800
espea32.menu.UploadSpeed.460800.macosx=460800
espea32.menu.UploadSpeed.460800.upload.speed=460800
espea32.menu.UploadSpeed.512000.windows=512000
espea32.menu.UploadSpeed.512000.upload.speed=512000
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.name=Noduino Quantum
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
quantum.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
quantum.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
quantum.upload.maximum_data_size=327680
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.upload.wait_for_upload_port=true
quantum.serial.disableDTR=true
quantum.serial.disableRTS=true
quantum.build.mcu=esp32
quantum.build.core=esp32
quantum.build.variant=quantum
quantum.build.board=QUANTUM
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
quantum.build.f_cpu=240000000L
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.build.flash_mode=qio
quantum.build.flash_size=16MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
quantum.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
quantum.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
quantum.build.defines=
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.menu.FlashFreq.80=80MHz
quantum.menu.FlashFreq.80.build.flash_freq=80m
quantum.menu.FlashFreq.40=40MHz
quantum.menu.FlashFreq.40.build.flash_freq=40m
quantum.menu.UploadSpeed.921600=921600
quantum.menu.UploadSpeed.921600.upload.speed=921600
quantum.menu.UploadSpeed.115200=115200
quantum.menu.UploadSpeed.115200.upload.speed=115200
quantum.menu.UploadSpeed.256000.windows=256000
quantum.menu.UploadSpeed.256000.upload.speed=256000
quantum.menu.UploadSpeed.230400.windows.upload.speed=256000
quantum.menu.UploadSpeed.230400=230400
quantum.menu.UploadSpeed.230400.upload.speed=230400
quantum.menu.UploadSpeed.460800.linux=460800
quantum.menu.UploadSpeed.460800.macosx=460800
quantum.menu.UploadSpeed.460800.upload.speed=460800
quantum.menu.UploadSpeed.512000.windows=512000
quantum.menu.UploadSpeed.512000.upload.speed=512000
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.name=Node32s
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
node32s.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
node32s.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
node32s.upload.maximum_data_size=327680
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.upload.wait_for_upload_port=true
node32s.serial.disableDTR=true
node32s.serial.disableRTS=true
node32s.build.mcu=esp32
node32s.build.core=esp32
node32s.build.variant=node32s
node32s.build.board=Node32s
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
node32s.build.f_cpu=240000000L
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.build.flash_mode=dio
node32s.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
node32s.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
node32s.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
node32s.build.defines=
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.menu.FlashFreq.80=80MHz
node32s.menu.FlashFreq.80.build.flash_freq=80m
node32s.menu.FlashFreq.40=40MHz
node32s.menu.FlashFreq.40.build.flash_freq=40m
node32s.menu.UploadSpeed.921600=921600
node32s.menu.UploadSpeed.921600.upload.speed=921600
node32s.menu.UploadSpeed.115200=115200
node32s.menu.UploadSpeed.115200.upload.speed=115200
node32s.menu.UploadSpeed.256000.windows=256000
node32s.menu.UploadSpeed.256000.upload.speed=256000
node32s.menu.UploadSpeed.230400.windows.upload.speed=256000
node32s.menu.UploadSpeed.230400=230400
node32s.menu.UploadSpeed.230400.upload.speed=230400
node32s.menu.UploadSpeed.460800.linux=460800
node32s.menu.UploadSpeed.460800.macosx=460800
node32s.menu.UploadSpeed.460800.upload.speed=460800
node32s.menu.UploadSpeed.512000.windows=512000
node32s.menu.UploadSpeed.512000.upload.speed=512000
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.name=Hornbill ESP32 Dev
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
hornbill32dev.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
hornbill32dev.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
hornbill32dev.upload.maximum_data_size=327680
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.upload.wait_for_upload_port=true
hornbill32dev.serial.disableDTR=true
hornbill32dev.serial.disableRTS=true
hornbill32dev.build.mcu=esp32
hornbill32dev.build.core=esp32
hornbill32dev.build.variant=hornbill32dev
hornbill32dev.build.board=HORNBILL_ESP32_DEV
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.build.f_cpu=240000000L
hornbill32dev.build.flash_mode=dio
hornbill32dev.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
hornbill32dev.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
hornbill32dev.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
hornbill32dev.build.defines=
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.menu.FlashFreq.80=80MHz
hornbill32dev.menu.FlashFreq.80.build.flash_freq=80m
hornbill32dev.menu.FlashFreq.40=40MHz
hornbill32dev.menu.FlashFreq.40.build.flash_freq=40m
hornbill32dev.menu.UploadSpeed.921600=921600
hornbill32dev.menu.UploadSpeed.921600.upload.speed=921600
hornbill32dev.menu.UploadSpeed.115200=115200
hornbill32dev.menu.UploadSpeed.115200.upload.speed=115200
hornbill32dev.menu.UploadSpeed.256000.windows=256000
hornbill32dev.menu.UploadSpeed.256000.upload.speed=256000
hornbill32dev.menu.UploadSpeed.230400.windows.upload.speed=256000
hornbill32dev.menu.UploadSpeed.230400=230400
hornbill32dev.menu.UploadSpeed.230400.upload.speed=230400
hornbill32dev.menu.UploadSpeed.460800.linux=460800
hornbill32dev.menu.UploadSpeed.460800.macosx=460800
hornbill32dev.menu.UploadSpeed.460800.upload.speed=460800
hornbill32dev.menu.UploadSpeed.512000.windows=512000
hornbill32dev.menu.UploadSpeed.512000.upload.speed=512000
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32minima.name=Hornbill ESP32 Minima
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
hornbill32minima.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
hornbill32minima.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
hornbill32minima.upload.maximum_data_size=327680
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32minima.upload.wait_for_upload_port=true
hornbill32minima.serial.disableDTR=true
hornbill32minima.serial.disableRTS=true
hornbill32minima.build.mcu=esp32
hornbill32minima.build.core=esp32
hornbill32minima.build.variant=hornbill32minima
hornbill32minima.build.board=HORNBILL_ESP32_MINIMA
hornbill32minima.build.f_cpu=240000000L
hornbill32minima.build.flash_mode=dio
hornbill32minima.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
hornbill32minima.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
hornbill32minima.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
hornbill32minima.build.defines=
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32minima.menu.FlashFreq.80=80MHz
hornbill32minima.menu.FlashFreq.80.build.flash_freq=80m
hornbill32minima.menu.FlashFreq.40=40MHz
hornbill32minima.menu.FlashFreq.40.build.flash_freq=40m
hornbill32minima.menu.UploadSpeed.921600=921600
hornbill32minima.menu.UploadSpeed.921600.upload.speed=921600
hornbill32minima.menu.UploadSpeed.115200=115200
hornbill32minima.menu.UploadSpeed.115200.upload.speed=115200
hornbill32minima.menu.UploadSpeed.256000.windows=256000
hornbill32minima.menu.UploadSpeed.256000.upload.speed=256000
hornbill32minima.menu.UploadSpeed.230400.windows.upload.speed=256000
hornbill32minima.menu.UploadSpeed.230400=230400
hornbill32minima.menu.UploadSpeed.230400.upload.speed=230400
hornbill32minima.menu.UploadSpeed.460800.linux=460800
hornbill32minima.menu.UploadSpeed.460800.macosx=460800
hornbill32minima.menu.UploadSpeed.460800.upload.speed=460800
hornbill32minima.menu.UploadSpeed.512000.windows=512000
hornbill32minima.menu.UploadSpeed.512000.upload.speed=512000
add DFRobot FireBeetle-ESP32 support (#239) * add DFRobot FireBeetle-ESP32 support * add variant for fireBeetle-ESP32 * The name of the env variant is changed to firebeetle32
2017-03-05 09:30:12 +01:00
##############################################################
firebeetle32.name=FireBeetle-ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
firebeetle32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
firebeetle32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
firebeetle32.upload.maximum_data_size=327680
add DFRobot FireBeetle-ESP32 support (#239) * add DFRobot FireBeetle-ESP32 support * add variant for fireBeetle-ESP32 * The name of the env variant is changed to firebeetle32
2017-03-05 09:30:12 +01:00
firebeetle32.upload.wait_for_upload_port=true
firebeetle32.serial.disableDTR=true
firebeetle32.serial.disableRTS=true
firebeetle32.build.mcu=esp32
firebeetle32.build.core=esp32
firebeetle32.build.variant=firebeetle32
firebeetle32.build.board=ESP32_DEV
firebeetle32.build.f_cpu=240000000L
firebeetle32.build.flash_mode=dio
firebeetle32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
firebeetle32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
firebeetle32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
firebeetle32.build.defines=
add DFRobot FireBeetle-ESP32 support (#239) * add DFRobot FireBeetle-ESP32 support * add variant for fireBeetle-ESP32 * The name of the env variant is changed to firebeetle32
2017-03-05 09:30:12 +01:00
firebeetle32.menu.FlashFreq.80=80MHz
firebeetle32.menu.FlashFreq.80.build.flash_freq=80m
firebeetle32.menu.FlashFreq.40=40MHz
firebeetle32.menu.FlashFreq.40.build.flash_freq=40m
firebeetle32.menu.UploadSpeed.921600=921600
firebeetle32.menu.UploadSpeed.921600.upload.speed=921600
firebeetle32.menu.UploadSpeed.115200=115200
firebeetle32.menu.UploadSpeed.115200.upload.speed=115200
firebeetle32.menu.UploadSpeed.256000.windows=256000
firebeetle32.menu.UploadSpeed.256000.upload.speed=256000
firebeetle32.menu.UploadSpeed.230400.windows.upload.speed=256000
firebeetle32.menu.UploadSpeed.230400=230400
firebeetle32.menu.UploadSpeed.230400.upload.speed=230400
firebeetle32.menu.UploadSpeed.460800.linux=460800
firebeetle32.menu.UploadSpeed.460800.macosx=460800
firebeetle32.menu.UploadSpeed.460800.upload.speed=460800
firebeetle32.menu.UploadSpeed.512000.windows=512000
firebeetle32.menu.UploadSpeed.512000.upload.speed=512000
1. add IntoRobot Fig support (#284)
2017-03-31 00:02:45 +02:00
##############################################################
intorobot-fig.name=IntoRobot Fig
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
intorobot-fig.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
intorobot-fig.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
intorobot-fig.upload.maximum_data_size=327680
1. add IntoRobot Fig support (#284)
2017-03-31 00:02:45 +02:00
intorobot-fig.upload.wait_for_upload_port=true
intorobot-fig.serial.disableDTR=true
intorobot-fig.serial.disableRTS=true
intorobot-fig.build.mcu=esp32
intorobot-fig.build.core=esp32
intorobot-fig.build.variant=intorobot-fig
intorobot-fig.build.board=INTOROBOT_ESP32_DEV
intorobot-fig.build.f_cpu=240000000L
intorobot-fig.build.flash_mode=dio
intorobot-fig.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
intorobot-fig.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
intorobot-fig.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
intorobot-fig.build.defines=
1. add IntoRobot Fig support (#284)
2017-03-31 00:02:45 +02:00
intorobot-fig.menu.FlashFreq.80=80MHz
intorobot-fig.menu.FlashFreq.80.build.flash_freq=80m
intorobot-fig.menu.FlashFreq.40=40MHz
intorobot-fig.menu.FlashFreq.40.build.flash_freq=40m
intorobot-fig.menu.UploadSpeed.921600=921600
intorobot-fig.menu.UploadSpeed.921600.upload.speed=921600
intorobot-fig.menu.UploadSpeed.115200=115200
intorobot-fig.menu.UploadSpeed.115200.upload.speed=115200
intorobot-fig.menu.UploadSpeed.256000.windows=256000
intorobot-fig.menu.UploadSpeed.256000.upload.speed=256000
intorobot-fig.menu.UploadSpeed.230400.windows.upload.speed=256000
intorobot-fig.menu.UploadSpeed.230400=230400
intorobot-fig.menu.UploadSpeed.230400.upload.speed=230400
intorobot-fig.menu.UploadSpeed.460800.linux=460800
intorobot-fig.menu.UploadSpeed.460800.macosx=460800
intorobot-fig.menu.UploadSpeed.460800.upload.speed=460800
intorobot-fig.menu.UploadSpeed.512000.windows=512000
intorobot-fig.menu.UploadSpeed.512000.upload.speed=512000
#334: Update boards.txt for Onehorse's ESP32 Dev Module (#337)
2017-04-28 12:29:04 +02:00
##############################################################
onehorse32dev.name=Onehorse ESP32 Dev Module
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
onehorse32dev.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
onehorse32dev.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
onehorse32dev.upload.maximum_data_size=327680
#334: Update boards.txt for Onehorse's ESP32 Dev Module (#337)
2017-04-28 12:29:04 +02:00
onehorse32dev.upload.wait_for_upload_port=true
onehorse32dev.serial.disableDTR=true
onehorse32dev.serial.disableRTS=true
onehorse32dev.build.mcu=esp32
onehorse32dev.build.core=esp32
onehorse32dev.build.variant=onehorse32dev
onehorse32dev.build.board=ONEHORSE_ESP32_DEV
onehorse32dev.build.f_cpu=240000000L
onehorse32dev.build.flash_mode=dout
onehorse32dev.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
onehorse32dev.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
onehorse32dev.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
onehorse32dev.build.defines=
#334: Update boards.txt for Onehorse's ESP32 Dev Module (#337)
2017-04-28 12:29:04 +02:00
onehorse32dev.menu.FlashFreq.80=80MHz
onehorse32dev.menu.FlashFreq.80.build.flash_freq=80m
onehorse32dev.menu.FlashFreq.40=40MHz
onehorse32dev.menu.FlashFreq.40.build.flash_freq=40m
onehorse32dev.menu.UploadSpeed.921600=921600
onehorse32dev.menu.UploadSpeed.921600.upload.speed=921600
onehorse32dev.menu.UploadSpeed.115200=115200
onehorse32dev.menu.UploadSpeed.115200.upload.speed=115200
onehorse32dev.menu.UploadSpeed.256000.windows=256000
onehorse32dev.menu.UploadSpeed.256000.upload.speed=256000
onehorse32dev.menu.UploadSpeed.230400.windows.upload.speed=256000
onehorse32dev.menu.UploadSpeed.230400=230400
onehorse32dev.menu.UploadSpeed.230400.upload.speed=230400
onehorse32dev.menu.UploadSpeed.460800.linux=460800
onehorse32dev.menu.UploadSpeed.460800.macosx=460800
onehorse32dev.menu.UploadSpeed.460800.upload.speed=460800
onehorse32dev.menu.UploadSpeed.512000.windows=512000
onehorse32dev.menu.UploadSpeed.512000.upload.speed=512000
feather variant (#364)
2017-05-08 22:06:30 +02:00
##############################################################
featheresp32.name=Adafruit ESP32 Feather
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
featheresp32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
featheresp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
featheresp32.upload.maximum_data_size=327680
feather variant (#364)
2017-05-08 22:06:30 +02:00
featheresp32.upload.wait_for_upload_port=true
featheresp32.serial.disableDTR=true
featheresp32.serial.disableRTS=true
featheresp32.build.mcu=esp32
featheresp32.build.core=esp32
featheresp32.build.variant=feather_esp32
featheresp32.build.board=FEATHER_ESP32
featheresp32.build.f_cpu=240000000L
featheresp32.build.flash_mode=dio
featheresp32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
featheresp32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
featheresp32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
featheresp32.build.defines=
feather variant (#364)
2017-05-08 22:06:30 +02:00
featheresp32.menu.FlashFreq.80=80MHz
featheresp32.menu.FlashFreq.80.build.flash_freq=80m
featheresp32.menu.FlashFreq.40=40MHz
featheresp32.menu.FlashFreq.40.build.flash_freq=40m
featheresp32.menu.UploadSpeed.921600=921600
featheresp32.menu.UploadSpeed.921600.upload.speed=921600
featheresp32.menu.UploadSpeed.115200=115200
featheresp32.menu.UploadSpeed.115200.upload.speed=115200
featheresp32.menu.UploadSpeed.256000.windows=256000
featheresp32.menu.UploadSpeed.256000.upload.speed=256000
featheresp32.menu.UploadSpeed.230400.windows.upload.speed=256000
featheresp32.menu.UploadSpeed.230400=230400
featheresp32.menu.UploadSpeed.230400.upload.speed=230400
featheresp32.menu.UploadSpeed.460800.linux=460800
featheresp32.menu.UploadSpeed.460800.macosx=460800
featheresp32.menu.UploadSpeed.460800.upload.speed=460800
featheresp32.menu.UploadSpeed.512000.windows=512000
featheresp32.menu.UploadSpeed.512000.upload.speed=512000
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
featheresp32.menu.DebugLevel.none=None
featheresp32.menu.DebugLevel.none.build.code_debug=0
featheresp32.menu.DebugLevel.error=Error
featheresp32.menu.DebugLevel.error.build.code_debug=1
featheresp32.menu.DebugLevel.warn=Warn
featheresp32.menu.DebugLevel.warn.build.code_debug=2
featheresp32.menu.DebugLevel.info=Info
featheresp32.menu.DebugLevel.info.build.code_debug=3
featheresp32.menu.DebugLevel.debug=Debug
featheresp32.menu.DebugLevel.debug.build.code_debug=4
featheresp32.menu.DebugLevel.verbose=Verbose
featheresp32.menu.DebugLevel.verbose.build.code_debug=5
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
##############################################################
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.name=NodeMCU-32S
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
nodemcu-32s.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
nodemcu-32s.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
nodemcu-32s.upload.maximum_data_size=327680
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.upload.wait_for_upload_port=true
nodemcu-32s.serial.disableDTR=true
nodemcu-32s.serial.disableRTS=true
nodemcu-32s.build.mcu=esp32
nodemcu-32s.build.core=esp32
nodemcu-32s.build.variant=nodemcu-32s
fix NodeMCU-32S .build.board property (#812) The .build.board=xx proptery is used for generating a macro named "ARDUINO_xxx". C macro names should never have a "-" sign. * current: ARDUINO_NodeMCU-32S * should be: ARDUINO_=NodeMCU_32S
2017-11-06 14:24:00 +01:00
nodemcu-32s.build.board=NodeMCU_32S
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.build.f_cpu=240000000L
nodemcu-32s.build.flash_mode=dio
nodemcu-32s.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
nodemcu-32s.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
nodemcu-32s.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
nodemcu-32s.build.defines=
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.menu.FlashFreq.80=80MHz
nodemcu-32s.menu.FlashFreq.80.build.flash_freq=80m
nodemcu-32s.menu.FlashFreq.40=40MHz
nodemcu-32s.menu.FlashFreq.40.build.flash_freq=40m
nodemcu-32s.menu.UploadSpeed.921600=921600
nodemcu-32s.menu.UploadSpeed.921600.upload.speed=921600
nodemcu-32s.menu.UploadSpeed.115200=115200
nodemcu-32s.menu.UploadSpeed.115200.upload.speed=115200
nodemcu-32s.menu.UploadSpeed.256000.windows=256000
nodemcu-32s.menu.UploadSpeed.256000.upload.speed=256000
nodemcu-32s.menu.UploadSpeed.230400.windows.upload.speed=256000
nodemcu-32s.menu.UploadSpeed.230400=230400
nodemcu-32s.menu.UploadSpeed.230400.upload.speed=230400
nodemcu-32s.menu.UploadSpeed.460800.linux=460800
nodemcu-32s.menu.UploadSpeed.460800.macosx=460800
nodemcu-32s.menu.UploadSpeed.460800.upload.speed=460800
nodemcu-32s.menu.UploadSpeed.512000.windows=512000
nodemcu-32s.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.name=MH ET LIVE ESP32DevKIT
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
mhetesp32devkit.upload.tool=esptool_py
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
mhetesp32devkit.upload.maximum_data_size=327680
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.upload.wait_for_upload_port=true
mhetesp32devkit.serial.disableDTR=true
mhetesp32devkit.serial.disableRTS=true
mhetesp32devkit.build.mcu=esp32
mhetesp32devkit.build.core=esp32
mhetesp32devkit.build.variant=mhetesp32devkit
mhetesp32devkit.build.board=MH_ET_LIVE_ESP32DEVKIT
mhetesp32devkit.build.f_cpu=240000000L
mhetesp32devkit.build.flash_mode=dio
mhetesp32devkit.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
mhetesp32devkit.build.boot=dio
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
mhetesp32devkit.build.defines=
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.menu.FlashFreq.80=80MHz
mhetesp32devkit.menu.FlashFreq.80.build.flash_freq=80m
mhetesp32devkit.menu.FlashFreq.40=40MHz
mhetesp32devkit.menu.FlashFreq.40.build.flash_freq=40m
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32devkit.menu.PartitionScheme.default=Default
mhetesp32devkit.menu.PartitionScheme.default.build.partitions=default
mhetesp32devkit.menu.PartitionScheme.no_ota=No OTA (Large APP)
mhetesp32devkit.menu.PartitionScheme.no_ota.build.partitions=no_ota
mhetesp32devkit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
mhetesp32devkit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
mhetesp32devkit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
mhetesp32devkit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.menu.UploadSpeed.921600=921600
mhetesp32devkit.menu.UploadSpeed.921600.upload.speed=921600
mhetesp32devkit.menu.UploadSpeed.115200=115200
mhetesp32devkit.menu.UploadSpeed.115200.upload.speed=115200
mhetesp32devkit.menu.UploadSpeed.256000.windows=256000
mhetesp32devkit.menu.UploadSpeed.256000.upload.speed=256000
mhetesp32devkit.menu.UploadSpeed.230400.windows.upload.speed=256000
mhetesp32devkit.menu.UploadSpeed.230400=230400
mhetesp32devkit.menu.UploadSpeed.230400.upload.speed=230400
mhetesp32devkit.menu.UploadSpeed.460800.linux=460800
mhetesp32devkit.menu.UploadSpeed.460800.macosx=460800
mhetesp32devkit.menu.UploadSpeed.460800.upload.speed=460800
mhetesp32devkit.menu.UploadSpeed.512000.windows=512000
mhetesp32devkit.menu.UploadSpeed.512000.upload.speed=512000
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32devkit.menu.DebugLevel.none=None
mhetesp32devkit.menu.DebugLevel.none.build.code_debug=0
mhetesp32devkit.menu.DebugLevel.error=Error
mhetesp32devkit.menu.DebugLevel.error.build.code_debug=1
mhetesp32devkit.menu.DebugLevel.warn=Warn
mhetesp32devkit.menu.DebugLevel.warn.build.code_debug=2
mhetesp32devkit.menu.DebugLevel.info=Info
mhetesp32devkit.menu.DebugLevel.info.build.code_debug=3
mhetesp32devkit.menu.DebugLevel.debug=Debug
mhetesp32devkit.menu.DebugLevel.debug.build.code_debug=4
mhetesp32devkit.menu.DebugLevel.verbose=Verbose
mhetesp32devkit.menu.DebugLevel.verbose.build.code_debug=5
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
##############################################################
mhetesp32minikit.name=MH ET LIVE ESP32MiniKit
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
mhetesp32minikit.upload.tool=esptool_py
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
mhetesp32minikit.upload.maximum_data_size=327680
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.upload.wait_for_upload_port=true
mhetesp32minikit.serial.disableDTR=true
mhetesp32minikit.serial.disableRTS=true
mhetesp32minikit.build.mcu=esp32
mhetesp32minikit.build.core=esp32
mhetesp32minikit.build.variant=mhetesp32minikit
mhetesp32minikit.build.board=MH_ET_LIVE_ESP32MINIKIT
mhetesp32minikit.build.f_cpu=240000000L
mhetesp32minikit.build.flash_mode=dio
mhetesp32minikit.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
mhetesp32minikit.build.boot=dio
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
mhetesp32minikit.build.defines=
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.menu.FlashFreq.80=80MHz
mhetesp32minikit.menu.FlashFreq.80.build.flash_freq=80m
mhetesp32minikit.menu.FlashFreq.40=40MHz
mhetesp32minikit.menu.FlashFreq.40.build.flash_freq=40m
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32minikit.menu.PartitionScheme.default=Default
mhetesp32minikit.menu.PartitionScheme.default.build.partitions=default
mhetesp32minikit.menu.PartitionScheme.no_ota=No OTA (Large APP)
mhetesp32minikit.menu.PartitionScheme.no_ota.build.partitions=no_ota
mhetesp32minikit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
mhetesp32minikit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
mhetesp32minikit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
mhetesp32minikit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.menu.UploadSpeed.921600=921600
mhetesp32minikit.menu.UploadSpeed.921600.upload.speed=921600
mhetesp32minikit.menu.UploadSpeed.115200=115200
mhetesp32minikit.menu.UploadSpeed.115200.upload.speed=115200
mhetesp32minikit.menu.UploadSpeed.256000.windows=256000
mhetesp32minikit.menu.UploadSpeed.256000.upload.speed=256000
mhetesp32minikit.menu.UploadSpeed.230400.windows.upload.speed=256000
mhetesp32minikit.menu.UploadSpeed.230400=230400
mhetesp32minikit.menu.UploadSpeed.230400.upload.speed=230400
mhetesp32minikit.menu.UploadSpeed.460800.linux=460800
mhetesp32minikit.menu.UploadSpeed.460800.macosx=460800
mhetesp32minikit.menu.UploadSpeed.460800.upload.speed=460800
mhetesp32minikit.menu.UploadSpeed.512000.windows=512000
mhetesp32minikit.menu.UploadSpeed.512000.upload.speed=512000
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32minikit.menu.DebugLevel.none=None
mhetesp32minikit.menu.DebugLevel.none.build.code_debug=0
mhetesp32minikit.menu.DebugLevel.error=Error
mhetesp32minikit.menu.DebugLevel.error.build.code_debug=1
mhetesp32minikit.menu.DebugLevel.warn=Warn
mhetesp32minikit.menu.DebugLevel.warn.build.code_debug=2
mhetesp32minikit.menu.DebugLevel.info=Info
mhetesp32minikit.menu.DebugLevel.info.build.code_debug=3
mhetesp32minikit.menu.DebugLevel.debug=Debug
mhetesp32minikit.menu.DebugLevel.debug.build.code_debug=4
mhetesp32minikit.menu.DebugLevel.verbose=Verbose
mhetesp32minikit.menu.DebugLevel.verbose.build.code_debug=5
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
#################################################################
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.name=ESP32vn IoT Uno
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32vn-iot-uno.upload.tool=esptool_py
fix upload.maximum_size as current partition size 0x140000 for esp32vn-iot-uno & heltec boards (#1052)
2018-03-04 20:29:49 +01:00
esp32vn-iot-uno.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32vn-iot-uno.upload.maximum_data_size=327680
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.upload.wait_for_upload_port=true
esp32vn-iot-uno.serial.disableDTR=true
esp32vn-iot-uno.serial.disableRTS=true
esp32vn-iot-uno.build.mcu=esp32
esp32vn-iot-uno.build.core=esp32
esp32vn-iot-uno.build.variant=esp32vn-iot-uno
Convert - to _ in build.board names (#1341) build.board is used to define a macro but - is not a permitted character in macro names. This causes the macro name to actually be only everything up to the first - and also many warnings when compiling for one of these boards: <command-line>:0:14: warning: ISO C++11 requires whitespace after the macro name <command-line>:0:14: warning: ISO C99 requires whitespace after the macro name I have followed the convention of the other build.board names by replacing - with _.
2018-05-14 13:09:25 +02:00
esp32vn-iot-uno.build.board=esp32vn_iot_uno
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.build.f_cpu=240000000L
esp32vn-iot-uno.build.flash_mode=dio
esp32vn-iot-uno.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32vn-iot-uno.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32vn-iot-uno.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32vn-iot-uno.build.defines=
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.menu.FlashFreq.80=80MHz
esp32vn-iot-uno.menu.FlashFreq.80.build.flash_freq=80m
esp32vn-iot-uno.menu.FlashFreq.40=40MHz
esp32vn-iot-uno.menu.FlashFreq.40.build.flash_freq=40m
esp32vn-iot-uno.menu.UploadSpeed.921600=921600
esp32vn-iot-uno.menu.UploadSpeed.921600.upload.speed=921600
esp32vn-iot-uno.menu.UploadSpeed.115200=115200
esp32vn-iot-uno.menu.UploadSpeed.115200.upload.speed=115200
esp32vn-iot-uno.menu.UploadSpeed.256000.windows=256000
esp32vn-iot-uno.menu.UploadSpeed.256000.upload.speed=256000
esp32vn-iot-uno.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32vn-iot-uno.menu.UploadSpeed.230400=230400
esp32vn-iot-uno.menu.UploadSpeed.230400.upload.speed=230400
esp32vn-iot-uno.menu.UploadSpeed.460800.linux=460800
esp32vn-iot-uno.menu.UploadSpeed.460800.macosx=460800
esp32vn-iot-uno.menu.UploadSpeed.460800.upload.speed=460800
esp32vn-iot-uno.menu.UploadSpeed.512000.windows=512000
esp32vn-iot-uno.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.name=DOIT ESP32 DEVKIT V1
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32doit-devkit-v1.upload.tool=esptool_py
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32doit-devkit-v1.upload.maximum_data_size=327680
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.upload.wait_for_upload_port=true
esp32doit-devkit-v1.serial.disableDTR=true
esp32doit-devkit-v1.serial.disableRTS=true
esp32doit-devkit-v1.build.mcu=esp32
esp32doit-devkit-v1.build.core=esp32
esp32doit-devkit-v1.build.variant=doitESP32devkitV1
esp32doit-devkit-v1.build.board=ESP32_DEV
esp32doit-devkit-v1.build.f_cpu=240000000L
esp32doit-devkit-v1.build.flash_mode=dio
esp32doit-devkit-v1.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32doit-devkit-v1.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32doit-devkit-v1.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32doit-devkit-v1.build.defines=
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.menu.FlashFreq.80=80MHz
esp32doit-devkit-v1.menu.FlashFreq.80.build.flash_freq=80m
esp32doit-devkit-v1.menu.FlashFreq.40=40MHz
esp32doit-devkit-v1.menu.FlashFreq.40.build.flash_freq=40m
esp32doit-devkit-v1.menu.UploadSpeed.921600=921600
esp32doit-devkit-v1.menu.UploadSpeed.921600.upload.speed=921600
esp32doit-devkit-v1.menu.UploadSpeed.115200=115200
esp32doit-devkit-v1.menu.UploadSpeed.115200.upload.speed=115200
esp32doit-devkit-v1.menu.UploadSpeed.256000.windows=256000
esp32doit-devkit-v1.menu.UploadSpeed.256000.upload.speed=256000
esp32doit-devkit-v1.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32doit-devkit-v1.menu.UploadSpeed.230400=230400
esp32doit-devkit-v1.menu.UploadSpeed.230400.upload.speed=230400
esp32doit-devkit-v1.menu.UploadSpeed.460800.linux=460800
esp32doit-devkit-v1.menu.UploadSpeed.460800.macosx=460800
esp32doit-devkit-v1.menu.UploadSpeed.460800.upload.speed=460800
esp32doit-devkit-v1.menu.UploadSpeed.512000.windows=512000
esp32doit-devkit-v1.menu.UploadSpeed.512000.upload.speed=512000
esp32doit-devkit-v1.menu.DebugLevel.none=None
esp32doit-devkit-v1.menu.DebugLevel.none.build.code_debug=0
esp32doit-devkit-v1.menu.DebugLevel.error=Error
esp32doit-devkit-v1.menu.DebugLevel.error.build.code_debug=1
esp32doit-devkit-v1.menu.DebugLevel.warn=Warn
esp32doit-devkit-v1.menu.DebugLevel.warn.build.code_debug=2
esp32doit-devkit-v1.menu.DebugLevel.info=Info
esp32doit-devkit-v1.menu.DebugLevel.info.build.code_debug=3
esp32doit-devkit-v1.menu.DebugLevel.debug=Debug
esp32doit-devkit-v1.menu.DebugLevel.debug.build.code_debug=4
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
##############################################################
esp32-evb.name=OLIMEX ESP32-EVB
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32-evb.upload.tool=esptool_py
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32-evb.upload.maximum_data_size=327680
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.upload.wait_for_upload_port=true
esp32-evb.serial.disableDTR=true
esp32-evb.serial.disableRTS=true
esp32-evb.build.mcu=esp32
esp32-evb.build.core=esp32
esp32-evb.build.variant=esp32-evb
Convert - to _ in build.board names (#1341) build.board is used to define a macro but - is not a permitted character in macro names. This causes the macro name to actually be only everything up to the first - and also many warnings when compiling for one of these boards: <command-line>:0:14: warning: ISO C++11 requires whitespace after the macro name <command-line>:0:14: warning: ISO C99 requires whitespace after the macro name I have followed the convention of the other build.board names by replacing - with _.
2018-05-14 13:09:25 +02:00
esp32-evb.build.board=ESP32_EVB
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.build.f_cpu=240000000L
esp32-evb.build.flash_mode=dio
esp32-evb.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32-evb.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32-evb.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32-evb.build.defines=
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.menu.FlashFreq.80=80MHz
esp32-evb.menu.FlashFreq.80.build.flash_freq=80m
esp32-evb.menu.FlashFreq.40=40MHz
esp32-evb.menu.FlashFreq.40.build.flash_freq=40m
esp32-evb.menu.UploadSpeed.115200=115200
esp32-evb.menu.UploadSpeed.115200.upload.speed=115200
##############################################################
esp32-gateway.name=OLIMEX ESP32-GATEWAY
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32-gateway.upload.tool=esptool_py
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32-gateway.upload.maximum_data_size=327680
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.upload.wait_for_upload_port=true
esp32-gateway.serial.disableDTR=true
esp32-gateway.serial.disableRTS=true
esp32-gateway.build.mcu=esp32
esp32-gateway.build.core=esp32
esp32-gateway.build.variant=esp32-gateway
Convert - to _ in build.board names (#1341) build.board is used to define a macro but - is not a permitted character in macro names. This causes the macro name to actually be only everything up to the first - and also many warnings when compiling for one of these boards: <command-line>:0:14: warning: ISO C++11 requires whitespace after the macro name <command-line>:0:14: warning: ISO C99 requires whitespace after the macro name I have followed the convention of the other build.board names by replacing - with _.
2018-05-14 13:09:25 +02:00
esp32-gateway.build.board=ESP32_GATEWAY
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.build.f_cpu=240000000L
esp32-gateway.build.flash_mode=dio
esp32-gateway.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32-gateway.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32-gateway.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32-gateway.build.defines=
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.menu.FlashFreq.80=80MHz
esp32-gateway.menu.FlashFreq.80.build.flash_freq=80m
esp32-gateway.menu.FlashFreq.40=40MHz
esp32-gateway.menu.FlashFreq.40.build.flash_freq=40m
esp32-gateway.menu.UploadSpeed.115200=115200
esp32-gateway.menu.UploadSpeed.115200.upload.speed=115200
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
##############################################################
Update (#1992) Added Olimex board ESP32-PoE. pins_arduino header file based on the ESP32-EVB with changed SS pin and removed BOARD_HAS_1BIT_SDMMC macro.
2018-11-19 17:00:20 +01:00
esp32-poe.name=OLIMEX ESP32-PoE
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32-poe.upload.tool=esptool_py
Update (#1992) Added Olimex board ESP32-PoE. pins_arduino header file based on the ESP32-EVB with changed SS pin and removed BOARD_HAS_1BIT_SDMMC macro.
2018-11-19 17:00:20 +01:00
esp32-poe.upload.maximum_size=1310720
esp32-poe.upload.maximum_data_size=327680
esp32-poe.upload.wait_for_upload_port=true
esp32-poe.serial.disableDTR=true
esp32-poe.serial.disableRTS=true
esp32-poe.build.mcu=esp32
esp32-poe.build.core=esp32
esp32-poe.build.variant=esp32-poe
esp32-poe.build.board=ESP32_POE
esp32-poe.build.f_cpu=240000000L
esp32-poe.build.flash_mode=dio
esp32-poe.build.flash_size=4MB
esp32-poe.build.boot=dio
esp32-poe.build.partitions=default
esp32-poe.build.defines=
esp32-poe.menu.FlashFreq.80=80MHz
esp32-poe.menu.FlashFreq.80.build.flash_freq=80m
esp32-poe.menu.FlashFreq.40=40MHz
esp32-poe.menu.FlashFreq.40.build.flash_freq=40m
esp32-poe.menu.UploadSpeed.115200=115200
esp32-poe.menu.UploadSpeed.115200.upload.speed=115200
##############################################################
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.name=ThaiEasyElec's ESPino32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
espino32.upload.tool=esptool_py
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
espino32.upload.maximum_data_size=327680
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.upload.wait_for_upload_port=true
espino32.serial.disableDTR=true
espino32.serial.disableRTS=true
espino32.build.mcu=esp32
espino32.build.core=esp32
espino32.build.variant=espino32
espino32.build.board=ESPino32
espino32.build.f_cpu=240000000L
espino32.build.flash_mode=dio
espino32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espino32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
espino32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
espino32.build.defines=
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.menu.FlashFreq.80=80MHz
espino32.menu.FlashFreq.80.build.flash_freq=80m
espino32.menu.FlashFreq.40=40MHz
espino32.menu.FlashFreq.40.build.flash_freq=40m
espino32.menu.UploadSpeed.921600=921600
espino32.menu.UploadSpeed.921600.upload.speed=921600
espino32.menu.UploadSpeed.115200=115200
espino32.menu.UploadSpeed.115200.upload.speed=115200
espino32.menu.UploadSpeed.256000.windows=256000
espino32.menu.UploadSpeed.256000.upload.speed=256000
espino32.menu.UploadSpeed.230400.windows.upload.speed=256000
espino32.menu.UploadSpeed.230400=230400
espino32.menu.UploadSpeed.230400.upload.speed=230400
espino32.menu.UploadSpeed.460800.linux=460800
espino32.menu.UploadSpeed.460800.macosx=460800
espino32.menu.UploadSpeed.460800.upload.speed=460800
espino32.menu.UploadSpeed.512000.windows=512000
espino32.menu.UploadSpeed.512000.upload.speed=512000
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
##############################################################
m5stack-core-esp32.name=M5Stack-Core-ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
m5stack-core-esp32.upload.tool=esptool_py
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
m5stack-core-esp32.upload.maximum_data_size=327680
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.upload.wait_for_upload_port=true
m5stack-core-esp32.serial.disableDTR=true
m5stack-core-esp32.serial.disableRTS=true
m5stack-core-esp32.build.mcu=esp32
m5stack-core-esp32.build.core=esp32
currently, when M5Stack board is selected (#1242) M5Stack variant (pins_arduino.h) file is not automatically included, because boards.txt m5stack-core-esp32.build.variant=esp32 This commit changes m5stack-core-esp32.build.variant from esp32 to m5stack_core_esp32 also rename M5Stack variant directory from m5stack-core-esp32 to m5stack_core_esp32
2018-04-06 18:04:12 +02:00
m5stack-core-esp32.build.variant=m5stack_core_esp32
Fixed M5Stack build.board name (#1187)
2018-03-09 11:15:44 +01:00
m5stack-core-esp32.build.board=M5Stack_Core_ESP32
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.build.f_cpu=240000000L
m5stack-core-esp32.build.flash_size=4MB
m5stack-core-esp32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
m5stack-core-esp32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
m5stack-core-esp32.build.defines=
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.qio=QIO
m5stack-core-esp32.menu.FlashMode.qio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.qio.build.boot=qio
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.dio=DIO
m5stack-core-esp32.menu.FlashMode.dio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.dio.build.boot=dio
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.qout=QOUT
m5stack-core-esp32.menu.FlashMode.qout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.qout.build.boot=qout
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.dout=DOUT
m5stack-core-esp32.menu.FlashMode.dout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.dout.build.boot=dout
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashFreq.80=80MHz
m5stack-core-esp32.menu.FlashFreq.80.build.flash_freq=80m
m5stack-core-esp32.menu.FlashFreq.40=40MHz
m5stack-core-esp32.menu.FlashFreq.40.build.flash_freq=40m
Selectable (from menu) partitions for m5stack (#1382) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378
2018-05-14 13:03:21 +02:00
m5stack-core-esp32.menu.PartitionScheme.default=Default
m5stack-core-esp32.menu.PartitionScheme.default.build.partitions=default
m5stack-core-esp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
m5stack-core-esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
m5stack-core-esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
m5stack-core-esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
m5stack-core-esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
m5stack-core-esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.UploadSpeed.921600=921600
m5stack-core-esp32.menu.UploadSpeed.921600.upload.speed=921600
m5stack-core-esp32.menu.UploadSpeed.115200=115200
m5stack-core-esp32.menu.UploadSpeed.115200.upload.speed=115200
m5stack-core-esp32.menu.UploadSpeed.256000.windows=256000
m5stack-core-esp32.menu.UploadSpeed.256000.upload.speed=256000
m5stack-core-esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
m5stack-core-esp32.menu.UploadSpeed.230400=230400
m5stack-core-esp32.menu.UploadSpeed.230400.upload.speed=230400
m5stack-core-esp32.menu.UploadSpeed.460800.linux=460800
m5stack-core-esp32.menu.UploadSpeed.460800.macosx=460800
m5stack-core-esp32.menu.UploadSpeed.460800.upload.speed=460800
m5stack-core-esp32.menu.UploadSpeed.512000.windows=512000
m5stack-core-esp32.menu.UploadSpeed.512000.upload.speed=512000
m5stack-core-esp32.menu.DebugLevel.none=None
m5stack-core-esp32.menu.DebugLevel.none.build.code_debug=0
m5stack-core-esp32.menu.DebugLevel.error=Error
m5stack-core-esp32.menu.DebugLevel.error.build.code_debug=1
m5stack-core-esp32.menu.DebugLevel.warn=Warn
m5stack-core-esp32.menu.DebugLevel.warn.build.code_debug=2
m5stack-core-esp32.menu.DebugLevel.info=Info
m5stack-core-esp32.menu.DebugLevel.info.build.code_debug=3
m5stack-core-esp32.menu.DebugLevel.debug=Debug
m5stack-core-esp32.menu.DebugLevel.debug.build.code_debug=4
m5stack-core-esp32.menu.DebugLevel.verbose=Verbose
m5stack-core-esp32.menu.DebugLevel.verbose.build.code_debug=5
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
##############################################################
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.name=M5Stack-FIRE
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
m5stack-fire.upload.tool=esptool_py
Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969)
2018-11-19 16:53:13 +01:00
m5stack-fire.upload.maximum_size=6553600
m5stack-fire.upload.maximum_data_size=4521984
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.upload.wait_for_upload_port=true
m5stack-fire.serial.disableDTR=true
m5stack-fire.serial.disableRTS=true
m5stack-fire.build.mcu=esp32
m5stack-fire.build.core=esp32
m5stack-fire.build.variant=m5stack_fire
m5stack-fire.build.board=M5STACK_FIRE
m5stack-fire.build.f_cpu=240000000L
m5stack-fire.build.flash_size=16MB
m5stack-fire.build.flash_freq=80m
m5stack-fire.build.flash_mode=dio
m5stack-fire.build.boot=dio
Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969)
2018-11-19 16:53:13 +01:00
m5stack-fire.build.partitions=default_16MB
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.build.defines=
m5stack-fire.menu.PSRAM.enabled=Enabled
m5stack-fire.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
m5stack-fire.menu.PSRAM.disabled=Disabled
m5stack-fire.menu.PSRAM.disabled.build.defines=
Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969)
2018-11-19 16:53:13 +01:00
m5stack-fire.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
m5stack-fire.menu.PartitionScheme.default.build.partitions=default_16MB
m5stack-fire.menu.PartitionScheme.large_spiffs=Large SPIFFS (7 MB)
m5stack-fire.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
m5stack-fire.menu.PartitionScheme.large_spiffs.upload.maximum_size=4685824
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.menu.UploadSpeed.921600=921600
m5stack-fire.menu.UploadSpeed.921600.upload.speed=921600
m5stack-fire.menu.UploadSpeed.115200=115200
m5stack-fire.menu.UploadSpeed.115200.upload.speed=115200
m5stack-fire.menu.UploadSpeed.256000.windows=256000
m5stack-fire.menu.UploadSpeed.256000.upload.speed=256000
m5stack-fire.menu.UploadSpeed.230400.windows.upload.speed=256000
m5stack-fire.menu.UploadSpeed.230400=230400
m5stack-fire.menu.UploadSpeed.230400.upload.speed=230400
m5stack-fire.menu.UploadSpeed.460800.linux=460800
m5stack-fire.menu.UploadSpeed.460800.macosx=460800
m5stack-fire.menu.UploadSpeed.460800.upload.speed=460800
m5stack-fire.menu.UploadSpeed.512000.windows=512000
m5stack-fire.menu.UploadSpeed.512000.upload.speed=512000
m5stack-fire.menu.DebugLevel.none=None
m5stack-fire.menu.DebugLevel.none.build.code_debug=0
m5stack-fire.menu.DebugLevel.error=Error
m5stack-fire.menu.DebugLevel.error.build.code_debug=1
m5stack-fire.menu.DebugLevel.warn=Warn
m5stack-fire.menu.DebugLevel.warn.build.code_debug=2
m5stack-fire.menu.DebugLevel.info=Info
m5stack-fire.menu.DebugLevel.info.build.code_debug=3
m5stack-fire.menu.DebugLevel.debug=Debug
m5stack-fire.menu.DebugLevel.debug.build.code_debug=4
m5stack-fire.menu.DebugLevel.verbose=Verbose
m5stack-fire.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.name=ODROID ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
odroid_esp32.upload.tool=esptool_py
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
odroid_esp32.upload.maximum_data_size=327680
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.upload.wait_for_upload_port=true
odroid_esp32.serial.disableDTR=true
odroid_esp32.serial.disableRTS=true
odroid_esp32.build.mcu=esp32
odroid_esp32.build.core=esp32
odroid_esp32.build.variant=odroid_esp32
odroid_esp32.build.board=ODROID_ESP32
odroid_esp32.build.f_cpu=240000000L
odroid_esp32.build.flash_size=16MB
odroid_esp32.build.flash_mode=dio
odroid_esp32.build.boot=dio
odroid_esp32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
odroid_esp32.build.defines=
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.menu.FlashMode.qio=QIO
odroid_esp32.menu.FlashMode.qio.build.flash_mode=dio
odroid_esp32.menu.FlashMode.qio.build.boot=qio
odroid_esp32.menu.FlashMode.dio=DIO
odroid_esp32.menu.FlashMode.dio.build.flash_mode=dio
odroid_esp32.menu.FlashMode.dio.build.boot=dio
odroid_esp32.menu.FlashMode.qout=QOUT
odroid_esp32.menu.FlashMode.qout.build.flash_mode=dout
odroid_esp32.menu.FlashMode.qout.build.boot=qout
odroid_esp32.menu.FlashMode.dout=DOUT
odroid_esp32.menu.FlashMode.dout.build.flash_mode=dout
odroid_esp32.menu.FlashMode.dout.build.boot=dout
odroid_esp32.menu.FlashFreq.80=80MHz
odroid_esp32.menu.FlashFreq.80.build.flash_freq=80m
odroid_esp32.menu.FlashFreq.40=40MHz
odroid_esp32.menu.FlashFreq.40.build.flash_freq=40m
odroid_esp32.menu.PartitionScheme.default=Default
odroid_esp32.menu.PartitionScheme.default.build.partitions=default
odroid_esp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
odroid_esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
odroid_esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
odroid_esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
odroid_esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
odroid_esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
odroid_esp32.menu.UploadSpeed.921600=921600
odroid_esp32.menu.UploadSpeed.921600.upload.speed=921600
odroid_esp32.menu.UploadSpeed.115200=115200
odroid_esp32.menu.UploadSpeed.115200.upload.speed=115200
odroid_esp32.menu.UploadSpeed.256000.windows=256000
odroid_esp32.menu.UploadSpeed.256000.upload.speed=256000
odroid_esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
odroid_esp32.menu.UploadSpeed.230400=230400
odroid_esp32.menu.UploadSpeed.230400.upload.speed=230400
odroid_esp32.menu.UploadSpeed.460800.linux=460800
odroid_esp32.menu.UploadSpeed.460800.macosx=460800
odroid_esp32.menu.UploadSpeed.460800.upload.speed=460800
odroid_esp32.menu.UploadSpeed.512000.windows=512000
odroid_esp32.menu.UploadSpeed.512000.upload.speed=512000
odroid_esp32.menu.DebugLevel.none=None
odroid_esp32.menu.DebugLevel.none.build.code_debug=0
odroid_esp32.menu.DebugLevel.error=Error
odroid_esp32.menu.DebugLevel.error.build.code_debug=1
odroid_esp32.menu.DebugLevel.warn=Warn
odroid_esp32.menu.DebugLevel.warn.build.code_debug=2
odroid_esp32.menu.DebugLevel.info=Info
odroid_esp32.menu.DebugLevel.info.build.code_debug=3
odroid_esp32.menu.DebugLevel.debug=Debug
odroid_esp32.menu.DebugLevel.debug.build.code_debug=4
odroid_esp32.menu.DebugLevel.verbose=Verbose
odroid_esp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_kit_32.name=Heltec_WIFI_Kit_32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
heltec_wifi_kit_32.upload.tool=esptool_py
fix upload.maximum_size as current partition size 0x140000 for esp32vn-iot-uno & heltec boards (#1052)
2018-03-04 20:29:49 +01:00
heltec_wifi_kit_32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
heltec_wifi_kit_32.upload.maximum_data_size=327680
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_kit_32.upload.wait_for_upload_port=true
heltec_wifi_kit_32.serial.disableDTR=true
heltec_wifi_kit_32.serial.disableRTS=true
heltec_wifi_kit_32.build.mcu=esp32
heltec_wifi_kit_32.build.core=esp32
heltec_wifi_kit_32.build.variant=heltec_wifi_kit_32
heltec_wifi_kit_32.build.board=Heltec_WIFI_Kit_32
heltec_wifi_kit_32.build.f_cpu=240000000L
heltec_wifi_kit_32.build.flash_mode=dio
heltec_wifi_kit_32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
heltec_wifi_kit_32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
heltec_wifi_kit_32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
heltec_wifi_kit_32.build.defines=
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_kit_32.menu.FlashFreq.80=80MHz
heltec_wifi_kit_32.menu.FlashFreq.80.build.flash_freq=80m
heltec_wifi_kit_32.menu.FlashFreq.40=40MHz
heltec_wifi_kit_32.menu.FlashFreq.40.build.flash_freq=40m
heltec_wifi_kit_32.menu.UploadSpeed.921600=921600
heltec_wifi_kit_32.menu.UploadSpeed.921600.upload.speed=921600
heltec_wifi_kit_32.menu.UploadSpeed.115200=115200
heltec_wifi_kit_32.menu.UploadSpeed.115200.upload.speed=115200
heltec_wifi_kit_32.menu.UploadSpeed.256000.windows=256000
heltec_wifi_kit_32.menu.UploadSpeed.256000.upload.speed=256000
heltec_wifi_kit_32.menu.UploadSpeed.230400.windows.upload.speed=256000
heltec_wifi_kit_32.menu.UploadSpeed.230400=230400
heltec_wifi_kit_32.menu.UploadSpeed.230400.upload.speed=230400
heltec_wifi_kit_32.menu.UploadSpeed.460800.linux=460800
heltec_wifi_kit_32.menu.UploadSpeed.460800.macosx=460800
heltec_wifi_kit_32.menu.UploadSpeed.460800.upload.speed=460800
heltec_wifi_kit_32.menu.UploadSpeed.512000.windows=512000
heltec_wifi_kit_32.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
heltec_wifi_lora_32.name=Heltec_WIFI_LoRa_32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
heltec_wifi_lora_32.upload.tool=esptool_py
fix upload.maximum_size as current partition size 0x140000 for esp32vn-iot-uno & heltec boards (#1052)
2018-03-04 20:29:49 +01:00
heltec_wifi_lora_32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
heltec_wifi_lora_32.upload.maximum_data_size=327680
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_lora_32.upload.wait_for_upload_port=true
heltec_wifi_lora_32.serial.disableDTR=true
heltec_wifi_lora_32.serial.disableRTS=true
heltec_wifi_lora_32.build.mcu=esp32
heltec_wifi_lora_32.build.core=esp32
heltec_wifi_lora_32.build.variant=heltec_wifi_lora_32
heltec_wifi_lora_32.build.board=Heltec_WIFI_LoRa_32
heltec_wifi_lora_32.build.f_cpu=240000000L
heltec_wifi_lora_32.build.flash_mode=dio
heltec_wifi_lora_32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
heltec_wifi_lora_32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
heltec_wifi_lora_32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
heltec_wifi_lora_32.build.defines=
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_lora_32.menu.FlashFreq.80=80MHz
heltec_wifi_lora_32.menu.FlashFreq.80.build.flash_freq=80m
heltec_wifi_lora_32.menu.FlashFreq.40=40MHz
heltec_wifi_lora_32.menu.FlashFreq.40.build.flash_freq=40m
heltec_wifi_lora_32.menu.UploadSpeed.921600=921600
heltec_wifi_lora_32.menu.UploadSpeed.921600.upload.speed=921600
heltec_wifi_lora_32.menu.UploadSpeed.115200=115200
heltec_wifi_lora_32.menu.UploadSpeed.115200.upload.speed=115200
heltec_wifi_lora_32.menu.UploadSpeed.256000.windows=256000
heltec_wifi_lora_32.menu.UploadSpeed.256000.upload.speed=256000
heltec_wifi_lora_32.menu.UploadSpeed.230400.windows.upload.speed=256000
heltec_wifi_lora_32.menu.UploadSpeed.230400=230400
heltec_wifi_lora_32.menu.UploadSpeed.230400.upload.speed=230400
heltec_wifi_lora_32.menu.UploadSpeed.460800.linux=460800
heltec_wifi_lora_32.menu.UploadSpeed.460800.macosx=460800
heltec_wifi_lora_32.menu.UploadSpeed.460800.upload.speed=460800
heltec_wifi_lora_32.menu.UploadSpeed.512000.windows=512000
heltec_wifi_lora_32.menu.UploadSpeed.512000.upload.speed=512000
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
##############################################################
espectro32.name=ESPectro32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
espectro32.upload.tool=esptool_py
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
espectro32.upload.maximum_data_size=327680
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.upload.wait_for_upload_port=true
espectro32.serial.disableDTR=true
espectro32.serial.disableRTS=true
espectro32.build.mcu=esp32
espectro32.build.core=esp32
espectro32.build.variant=espectro32
espectro32.build.board=ESPECTRO32
espectro32.build.f_cpu=240000000L
espectro32.build.flash_size=4MB
espectro32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.build.boot=dio
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
espectro32.build.defines=
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.qio=QIO
espectro32.menu.FlashMode.qio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.qio.build.boot=qio
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.dio=DIO
espectro32.menu.FlashMode.dio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.dio.build.boot=dio
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.qout=QOUT
espectro32.menu.FlashMode.qout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.qout.build.boot=qout
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.dout=DOUT
espectro32.menu.FlashMode.dout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.dout.build.boot=dout
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashFreq.80=80MHz
espectro32.menu.FlashFreq.80.build.flash_freq=80m
espectro32.menu.FlashFreq.40=40MHz
espectro32.menu.FlashFreq.40.build.flash_freq=40m
espectro32.menu.FlashSize.4M=4MB (32Mb)
espectro32.menu.FlashSize.4M.build.flash_size=4MB
espectro32.menu.FlashSize.2M=2MB (16Mb)
espectro32.menu.FlashSize.2M.build.flash_size=2MB
espectro32.menu.FlashSize.2M.build.partitions=minimal
espectro32.menu.UploadSpeed.921600=921600
espectro32.menu.UploadSpeed.921600.upload.speed=921600
espectro32.menu.UploadSpeed.115200=115200
espectro32.menu.UploadSpeed.115200.upload.speed=115200
espectro32.menu.UploadSpeed.256000.windows=256000
espectro32.menu.UploadSpeed.256000.upload.speed=256000
espectro32.menu.UploadSpeed.230400.windows.upload.speed=256000
espectro32.menu.UploadSpeed.230400=230400
espectro32.menu.UploadSpeed.230400.upload.speed=230400
espectro32.menu.UploadSpeed.460800.linux=460800
espectro32.menu.UploadSpeed.460800.macosx=460800
espectro32.menu.UploadSpeed.460800.upload.speed=460800
espectro32.menu.UploadSpeed.512000.windows=512000
espectro32.menu.UploadSpeed.512000.upload.speed=512000
espectro32.menu.DebugLevel.none=None
espectro32.menu.DebugLevel.none.build.code_debug=0
espectro32.menu.DebugLevel.error=Error
espectro32.menu.DebugLevel.error.build.code_debug=1
espectro32.menu.DebugLevel.warn=Warn
espectro32.menu.DebugLevel.warn.build.code_debug=2
espectro32.menu.DebugLevel.info=Info
espectro32.menu.DebugLevel.info.build.code_debug=3
espectro32.menu.DebugLevel.debug=Debug
espectro32.menu.DebugLevel.debug.build.code_debug=4
espectro32.menu.DebugLevel.verbose=Verbose
espectro32.menu.DebugLevel.verbose.build.code_debug=5
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
##############################################################
CoreESP32.name=Microduino-CoreESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
CoreESP32.upload.tool=esptool_py
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
CoreESP32.upload.maximum_data_size=327680
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.upload.wait_for_upload_port=true
CoreESP32.serial.disableDTR=true
CoreESP32.serial.disableRTS=true
CoreESP32.build.mcu=esp32
CoreESP32.build.core=esp32
CoreESP32.build.variant=Microduino-esp32
CoreESP32.build.board=CoreESP32
CoreESP32.build.f_cpu=240000000L
CoreESP32.build.flash_mode=dio
CoreESP32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
CoreESP32.build.boot=dio
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
CoreESP32.build.defines=
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.menu.FlashFreq.80=80MHz
CoreESP32.menu.FlashFreq.80.build.flash_freq=80m
CoreESP32.menu.FlashFreq.40=40MHz
CoreESP32.menu.FlashFreq.40.build.flash_freq=40m
CoreESP32.menu.UploadSpeed.921600=921600
CoreESP32.menu.UploadSpeed.921600.upload.speed=921600
CoreESP32.menu.UploadSpeed.115200=115200
CoreESP32.menu.UploadSpeed.115200.upload.speed=115200
CoreESP32.menu.UploadSpeed.256000.windows=256000
CoreESP32.menu.UploadSpeed.256000.upload.speed=256000
CoreESP32.menu.UploadSpeed.230400.windows.upload.speed=256000
CoreESP32.menu.UploadSpeed.230400=230400
CoreESP32.menu.UploadSpeed.230400.upload.speed=230400
CoreESP32.menu.UploadSpeed.460800.linux=460800
CoreESP32.menu.UploadSpeed.460800.macosx=460800
CoreESP32.menu.UploadSpeed.460800.upload.speed=460800
CoreESP32.menu.UploadSpeed.512000.windows=512000
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
CoreESP32.menu.UploadSpeed.512000.upload.speed=512000
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
##############################################################
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.name=ALKS ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
alksesp32.upload.tool=esptool_py
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.upload.maximum_size=1310720
alksesp32.upload.maximum_data_size=327680
alksesp32.upload.wait_for_upload_port=true
alksesp32.serial.disableDTR=true
alksesp32.serial.disableRTS=true
alksesp32.build.mcu=esp32
alksesp32.build.core=esp32
alksesp32.build.variant=alksesp32
alksesp32.build.board=ALKS
alksesp32.build.f_cpu=240000000L
alksesp32.build.flash_size=4MB
alksesp32.build.flash_freq=40m
alksesp32.build.flash_mode=dio
alksesp32.build.boot=dio
alksesp32.build.partitions=default
alksesp32.build.defines=
alksesp32.menu.PartitionScheme.default=Default
alksesp32.menu.PartitionScheme.default.build.partitions=default
alksesp32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
alksesp32.menu.PartitionScheme.minimal.build.partitions=minimal
alksesp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
alksesp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
alksesp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
alksesp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
alksesp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
alksesp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
alksesp32.menu.FlashMode.qio=QIO
alksesp32.menu.FlashMode.qio.build.flash_mode=dio
alksesp32.menu.FlashMode.qio.build.boot=qio
alksesp32.menu.FlashMode.dio=DIO
alksesp32.menu.FlashMode.dio.build.flash_mode=dio
alksesp32.menu.FlashMode.dio.build.boot=dio
alksesp32.menu.FlashMode.qout=QOUT
alksesp32.menu.FlashMode.qout.build.flash_mode=dout
alksesp32.menu.FlashMode.qout.build.boot=qout
alksesp32.menu.FlashMode.dout=DOUT
alksesp32.menu.FlashMode.dout.build.flash_mode=dout
alksesp32.menu.FlashMode.dout.build.boot=dout
alksesp32.menu.FlashFreq.80=80MHz
alksesp32.menu.FlashFreq.80.build.flash_freq=80m
alksesp32.menu.FlashFreq.40=40MHz
alksesp32.menu.FlashFreq.40.build.flash_freq=40m
alksesp32.menu.FlashSize.4M=4MB (32Mb)
alksesp32.menu.FlashSize.4M.build.flash_size=4MB
alksesp32.menu.FlashSize.2M=2MB (16Mb)
alksesp32.menu.FlashSize.2M.build.flash_size=2MB
alksesp32.menu.FlashSize.2M.build.partitions=minimal
alksesp32.menu.UploadSpeed.921600=921600
alksesp32.menu.UploadSpeed.921600.upload.speed=921600
alksesp32.menu.UploadSpeed.115200=115200
alksesp32.menu.UploadSpeed.115200.upload.speed=115200
alksesp32.menu.UploadSpeed.256000.windows=256000
alksesp32.menu.UploadSpeed.256000.upload.speed=256000
alksesp32.menu.UploadSpeed.230400.windows.upload.speed=256000
alksesp32.menu.UploadSpeed.230400=230400
alksesp32.menu.UploadSpeed.230400.upload.speed=230400
alksesp32.menu.UploadSpeed.460800.linux=460800
alksesp32.menu.UploadSpeed.460800.macosx=460800
alksesp32.menu.UploadSpeed.460800.upload.speed=460800
alksesp32.menu.UploadSpeed.512000.windows=512000
alksesp32.menu.UploadSpeed.512000.upload.speed=512000
alksesp32.menu.DebugLevel.none=None
alksesp32.menu.DebugLevel.none.build.code_debug=0
alksesp32.menu.DebugLevel.error=Error
alksesp32.menu.DebugLevel.error.build.code_debug=1
alksesp32.menu.DebugLevel.warn=Warn
alksesp32.menu.DebugLevel.warn.build.code_debug=2
alksesp32.menu.DebugLevel.info=Info
alksesp32.menu.DebugLevel.info.build.code_debug=3
alksesp32.menu.DebugLevel.debug=Debug
alksesp32.menu.DebugLevel.debug.build.code_debug=4
alksesp32.menu.DebugLevel.verbose=Verbose
alksesp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
wipy3.name=WiPy 3.0
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
wipy3.upload.tool=esptool_py
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
wipy3.upload.maximum_size=1310720
wipy3.upload.maximum_data_size=294912
wipy3.upload.wait_for_upload_port=true
wipy3.serial.disableDTR=true
wipy3.serial.disableRTS=true
wipy3.build.mcu=esp32
wipy3.build.core=esp32
wipy3.build.variant=wipy3
wipy3.build.board=WIPY3
wipy3.build.f_cpu=240000000L
wipy3.build.flash_mode=dio
wipy3.build.flash_size=8MB
wipy3.build.boot=dio
wipy3.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
wipy3.build.defines=
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
wipy3.menu.FlashFreq.80=80MHz
wipy3.menu.FlashFreq.80.build.flash_freq=80m
wipy3.menu.FlashFreq.40=40MHz
wipy3.menu.FlashFreq.40.build.flash_freq=40m
wipy3.menu.UploadSpeed.921600=921600
wipy3.menu.UploadSpeed.921600.upload.speed=921600
wipy3.menu.UploadSpeed.115200=115200
wipy3.menu.UploadSpeed.115200.upload.speed=115200
wipy3.menu.UploadSpeed.256000.windows=256000
wipy3.menu.UploadSpeed.256000.upload.speed=256000
wipy3.menu.UploadSpeed.230400.windows.upload.speed=256000
wipy3.menu.UploadSpeed.230400=230400
wipy3.menu.UploadSpeed.230400.upload.speed=230400
wipy3.menu.UploadSpeed.460800.linux=460800
wipy3.menu.UploadSpeed.460800.macosx=460800
wipy3.menu.UploadSpeed.460800.upload.speed=460800
wipy3.menu.UploadSpeed.512000.windows=512000
wipy3.menu.UploadSpeed.512000.upload.speed=512000
wipy3.menu.DebugLevel.none=None
wipy3.menu.DebugLevel.none.build.code_debug=0
wipy3.menu.DebugLevel.error=Error
wipy3.menu.DebugLevel.error.build.code_debug=1
wipy3.menu.DebugLevel.warn=Warn
wipy3.menu.DebugLevel.warn.build.code_debug=2
wipy3.menu.DebugLevel.info=Info
wipy3.menu.DebugLevel.info.build.code_debug=3
wipy3.menu.DebugLevel.debug=Debug
wipy3.menu.DebugLevel.debug.build.code_debug=4
wipy3.menu.DebugLevel.verbose=Verbose
Add TTGO LoRa32 with OLED Version 1.x Board (#1663) * Add ttgo-lora32-v1 folder to variants folder * Add ttgo-lora32-v1 info to boards.txt * Add defs to pins_arduino.h for I2C OLED and SPI LoRa radio pinouts as per @stickbreaker
2018-07-24 19:49:38 +02:00
wipy3.menu.DebugLevel.verbose.build.code_debug=5
Add T-Beam Board Support (#1852)
2018-09-17 21:19:02 +02:00
##############################################################
Add BananaPi-BIT Development Board Support (#1810) * Add BPI-BIT boards connfig * Add BPI-BIT v1.3 boards
2018-09-17 22:32:14 +02:00
bpi-bit.name=BPI-BIT
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
bpi-bit.upload.tool=esptool_py
Add BananaPi-BIT Development Board Support (#1810) * Add BPI-BIT boards connfig * Add BPI-BIT v1.3 boards
2018-09-17 22:32:14 +02:00
bpi-bit.upload.maximum_size=1310720
bpi-bit.upload.maximum_data_size=294912
bpi-bit.upload.wait_for_upload_port=true
bpi-bit.serial.disableDTR=true
bpi-bit.serial.disableRTS=true
bpi-bit.build.mcu=esp32
bpi-bit.build.core=esp32
bpi-bit.build.variant=bpi-bit
bpi-bit.build.board=BPI-BIT
bpi-bit.build.f_cpu=160000000L
bpi-bit.build.flash_mode=dio
bpi-bit.build.flash_size=4MB
bpi-bit.build.boot=dio
bpi-bit.build.partitions=default
bpi-bit.menu.FlashFreq.80=80MHz
bpi-bit.menu.FlashFreq.80.build.flash_freq=80m
bpi-bit.menu.FlashFreq.40=40MHz
bpi-bit.menu.FlashFreq.40.build.flash_freq=40m
bpi-bit.menu.UploadSpeed.921600=921600
bpi-bit.menu.UploadSpeed.921600.upload.speed=921600
bpi-bit.menu.UploadSpeed.115200=115200
bpi-bit.menu.UploadSpeed.115200.upload.speed=115200
bpi-bit.menu.UploadSpeed.256000.windows=256000
bpi-bit.menu.UploadSpeed.256000.upload.speed=256000
bpi-bit.menu.UploadSpeed.230400.windows.upload.speed=256000
bpi-bit.menu.UploadSpeed.230400=230400
bpi-bit.menu.UploadSpeed.230400.upload.speed=230400
bpi-bit.menu.UploadSpeed.460800.linux=460800
bpi-bit.menu.UploadSpeed.460800.macosx=460800
bpi-bit.menu.UploadSpeed.460800.upload.speed=460800
bpi-bit.menu.UploadSpeed.512000.windows=512000
bpi-bit.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
wesp32.name=Silicognition wESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
wesp32.upload.tool=esptool_py
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
wesp32.upload.maximum_size=1310720
wesp32.upload.maximum_data_size=327680
wesp32.upload.wait_for_upload_port=true
wesp32.serial.disableDTR=true
wesp32.serial.disableRTS=true
wesp32.build.mcu=esp32
wesp32.build.core=esp32
wesp32.build.variant=wesp32
wesp32.build.board=WESP32
wesp32.build.f_cpu=240000000L
wesp32.build.flash_mode=dio
wesp32.build.flash_size=4MB
wesp32.build.boot=dio
wesp32.build.partitions=default
wesp32.build.defines=
wesp32.menu.FlashFreq.80=80MHz
wesp32.menu.FlashFreq.80.build.flash_freq=80m
wesp32.menu.FlashFreq.40=40MHz
wesp32.menu.FlashFreq.40.build.flash_freq=40m
wesp32.menu.UploadSpeed.921600=921600
wesp32.menu.UploadSpeed.921600.upload.speed=921600
wesp32.menu.UploadSpeed.115200=115200
wesp32.menu.UploadSpeed.115200.upload.speed=115200
wesp32.menu.UploadSpeed.256000.windows=256000
wesp32.menu.UploadSpeed.256000.upload.speed=256000
wesp32.menu.UploadSpeed.230400.windows.upload.speed=256000
wesp32.menu.UploadSpeed.230400=230400
wesp32.menu.UploadSpeed.230400.upload.speed=230400
wesp32.menu.UploadSpeed.460800.linux=460800
wesp32.menu.UploadSpeed.460800.macosx=460800
wesp32.menu.UploadSpeed.460800.upload.speed=460800
wesp32.menu.UploadSpeed.512000.windows=512000
wesp32.menu.UploadSpeed.512000.upload.speed=512000
wesp32.menu.DebugLevel.none=None
wesp32.menu.DebugLevel.none.build.code_debug=0
wesp32.menu.DebugLevel.error=Error
wesp32.menu.DebugLevel.error.build.code_debug=1
wesp32.menu.DebugLevel.warn=Warn
wesp32.menu.DebugLevel.warn.build.code_debug=2
wesp32.menu.DebugLevel.info=Info
wesp32.menu.DebugLevel.info.build.code_debug=3
wesp32.menu.DebugLevel.debug=Debug
wesp32.menu.DebugLevel.debug.build.code_debug=4
wesp32.menu.DebugLevel.verbose=Verbose
wesp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add T-Beam Board Support (#1852)
2018-09-17 21:19:02 +02:00
t-beam.name=T-Beam
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
t-beam.upload.tool=esptool_py
Add T-Beam Board Support (#1852)
2018-09-17 21:19:02 +02:00
t-beam.upload.maximum_size=1310720
t-beam.upload.maximum_data_size=327680
t-beam.upload.wait_for_upload_port=true
t-beam.serial.disableDTR=true
t-beam.serial.disableRTS=true
t-beam.build.mcu=esp32
t-beam.build.core=esp32
t-beam.build.variant=t-beam
t-beam.build.board=T-Beam
t-beam.build.f_cpu=240000000L
t-beam.build.flash_mode=dio
t-beam.build.flash_size=4MB
t-beam.build.boot=dio
t-beam.build.partitions=default
t-beam.menu.PSRAM.disabled=Disabled
t-beam.menu.PSRAM.disabled.build.defines=
t-beam.menu.PSRAM.enabled=Enabled
t-beam.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
t-beam.menu.FlashFreq.80=80MHz
t-beam.menu.FlashFreq.80.build.flash_freq=80m
t-beam.menu.FlashFreq.40=40MHz
t-beam.menu.FlashFreq.40.build.flash_freq=40m
t-beam.menu.UploadSpeed.921600=921600
t-beam.menu.UploadSpeed.921600.upload.speed=921600
t-beam.menu.UploadSpeed.115200=115200
t-beam.menu.UploadSpeed.115200.upload.speed=115200
t-beam.menu.UploadSpeed.256000.windows=256000
t-beam.menu.UploadSpeed.256000.upload.speed=256000
t-beam.menu.UploadSpeed.230400.windows.upload.speed=256000
t-beam.menu.UploadSpeed.230400=230400
t-beam.menu.UploadSpeed.230400.upload.speed=230400
t-beam.menu.UploadSpeed.460800.linux=460800
t-beam.menu.UploadSpeed.460800.macosx=460800
t-beam.menu.UploadSpeed.460800.upload.speed=460800
t-beam.menu.UploadSpeed.512000.windows=512000
t-beam.menu.UploadSpeed.512000.upload.speed=512000
t-beam.menu.DebugLevel.none=None
t-beam.menu.DebugLevel.none.build.code_debug=0
t-beam.menu.DebugLevel.error=Error
t-beam.menu.DebugLevel.error.build.code_debug=1
t-beam.menu.DebugLevel.warn=Warn
t-beam.menu.DebugLevel.warn.build.code_debug=2
t-beam.menu.DebugLevel.info=Info
t-beam.menu.DebugLevel.info.build.code_debug=3
t-beam.menu.DebugLevel.debug=Debug
t-beam.menu.DebugLevel.debug.build.code_debug=4
t-beam.menu.DebugLevel.verbose=Verbose
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
t-beam.menu.DebugLevel.verbose.build.code_debug=5
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
##############################################################
adding D-duino-32 board/pins (#2030) * adding d-duino-32 board/pins, fixes #930 * remove OLED_RST
2018-11-19 19:29:57 +01:00
d-duino-32.name=D-duino-32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
d-duino-32.upload.tool=esptool_py
adding D-duino-32 board/pins (#2030) * adding d-duino-32 board/pins, fixes #930 * remove OLED_RST
2018-11-19 19:29:57 +01:00
d-duino-32.upload.maximum_size=1310720
d-duino-32.upload.maximum_data_size=327680
d-duino-32.upload.wait_for_upload_port=true
d-duino-32.serial.disableDTR=true
d-duino-32.serial.disableRTS=true
d-duino-32.build.mcu=esp32
d-duino-32.build.core=esp32
d-duino-32.build.variant=d-duino-32
d-duino-32.build.board=D-duino-32
d-duino-32.build.f_cpu=240000000L
d-duino-32.build.flash_size=4MB
d-duino-32.build.flash_freq=40m
d-duino-32.build.flash_mode=dio
d-duino-32.build.boot=dio
d-duino-32.build.partitions=default
d-duino-32.build.defines=
d-duino-32.menu.PartitionScheme.default=Default
d-duino-32.menu.PartitionScheme.default.build.partitions=default
d-duino-32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
d-duino-32.menu.PartitionScheme.minimal.build.partitions=minimal
d-duino-32.menu.PartitionScheme.no_ota=No OTA (Large APP)
d-duino-32.menu.PartitionScheme.no_ota.build.partitions=no_ota
d-duino-32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
d-duino-32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
d-duino-32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
d-duino-32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
d-duino-32.menu.PartitionScheme.fatflash=16M Fat
d-duino-32.menu.PartitionScheme.fatflash.build.partitions=ffat
d-duino-32.menu.FlashFreq.80=80MHz
d-duino-32.menu.FlashFreq.80.build.flash_freq=80m
d-duino-32.menu.FlashFreq.40=40MHz
d-duino-32.menu.FlashFreq.40.build.flash_freq=40m
d-duino-32.menu.UploadSpeed.921600=921600
d-duino-32.menu.UploadSpeed.921600.upload.speed=921600
d-duino-32.menu.UploadSpeed.115200=115200
d-duino-32.menu.UploadSpeed.115200.upload.speed=115200
d-duino-32.menu.UploadSpeed.256000.windows=256000
d-duino-32.menu.UploadSpeed.256000.upload.speed=256000
d-duino-32.menu.UploadSpeed.230400.windows.upload.speed=256000
d-duino-32.menu.UploadSpeed.230400=230400
d-duino-32.menu.UploadSpeed.230400.upload.speed=230400
d-duino-32.menu.UploadSpeed.460800.linux=460800
d-duino-32.menu.UploadSpeed.460800.macosx=460800
d-duino-32.menu.UploadSpeed.460800.upload.speed=460800
d-duino-32.menu.UploadSpeed.512000.windows=512000
d-duino-32.menu.UploadSpeed.512000.upload.speed=512000
d-duino-32.menu.DebugLevel.none=None
d-duino-32.menu.DebugLevel.none.build.code_debug=0
d-duino-32.menu.DebugLevel.error=Error
d-duino-32.menu.DebugLevel.error.build.code_debug=1
d-duino-32.menu.DebugLevel.warn=Warn
d-duino-32.menu.DebugLevel.warn.build.code_debug=2
d-duino-32.menu.DebugLevel.info=Info
d-duino-32.menu.DebugLevel.info.build.code_debug=3
d-duino-32.menu.DebugLevel.debug=Debug
d-duino-32.menu.DebugLevel.debug.build.code_debug=4
d-duino-32.menu.DebugLevel.verbose=Verbose
d-duino-32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
lopy.name=LoPy
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
lopy.upload.tool=esptool_py
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
lopy.upload.maximum_size=1310720
lopy.upload.maximum_data_size=327680
lopy.upload.wait_for_upload_port=true
lopy.serial.disableDTR=true
lopy.serial.disableRTS=true
lopy.build.mcu=esp32
lopy.build.core=esp32
lopy.build.variant=lopy
lopy.build.board=LoPy
lopy.build.f_cpu=240000000L
lopy.build.flash_mode=dio
lopy.build.flash_size=4MB
lopy.build.boot=dio
lopy.build.partitions=default
lopy.menu.FlashFreq.80=80MHz
lopy.menu.FlashFreq.80.build.flash_freq=80m
lopy.menu.FlashFreq.40=40MHz
lopy.menu.FlashFreq.40.build.flash_freq=40m
lopy.menu.UploadSpeed.921600=921600
lopy.menu.UploadSpeed.921600.upload.speed=921600
lopy.menu.UploadSpeed.115200=115200
lopy.menu.UploadSpeed.115200.upload.speed=115200
lopy.menu.UploadSpeed.256000.windows=256000
lopy.menu.UploadSpeed.256000.upload.speed=256000
lopy.menu.UploadSpeed.230400.windows.upload.speed=256000
lopy.menu.UploadSpeed.230400=230400
lopy.menu.UploadSpeed.230400.upload.speed=230400
lopy.menu.UploadSpeed.460800.linux=460800
lopy.menu.UploadSpeed.460800.macosx=460800
lopy.menu.UploadSpeed.460800.upload.speed=460800
lopy.menu.UploadSpeed.512000.windows=512000
lopy.menu.UploadSpeed.512000.upload.speed=512000
lopy.menu.DebugLevel.none=None
lopy.menu.DebugLevel.none.build.code_debug=0
lopy.menu.DebugLevel.error=Error
lopy.menu.DebugLevel.error.build.code_debug=1
lopy.menu.DebugLevel.warn=Warn
lopy.menu.DebugLevel.warn.build.code_debug=2
lopy.menu.DebugLevel.info=Info
lopy.menu.DebugLevel.info.build.code_debug=3
lopy.menu.DebugLevel.debug=Debug
lopy.menu.DebugLevel.debug.build.code_debug=4
lopy.menu.DebugLevel.verbose=Verbose
lopy.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
lopy4.name=LoPy4
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
lopy4.upload.tool=esptool_py
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
lopy4.upload.maximum_size=1310720
lopy4.upload.maximum_data_size=327680
lopy4.upload.wait_for_upload_port=true
lopy4.serial.disableDTR=true
lopy4.serial.disableRTS=true
lopy4.build.mcu=esp32
lopy4.build.core=esp32
lopy4.build.variant=lopy4
lopy4.build.board=LoPy4
lopy4.build.f_cpu=240000000L
lopy4.build.flash_mode=dio
lopy4.build.flash_size=4MB
lopy4.build.boot=dio
lopy4.build.partitions=default
lopy4.menu.PSRAM.disabled=Disabled
lopy4.menu.PSRAM.disabled.build.defines=
lopy4.menu.PSRAM.enabled=Enabled
lopy4.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
lopy4.menu.FlashFreq.80=80MHz
lopy4.menu.FlashFreq.80.build.flash_freq=80m
lopy4.menu.FlashFreq.40=40MHz
lopy4.menu.FlashFreq.40.build.flash_freq=40m
lopy4.menu.UploadSpeed.921600=921600
lopy4.menu.UploadSpeed.921600.upload.speed=921600
lopy4.menu.UploadSpeed.115200=115200
lopy4.menu.UploadSpeed.115200.upload.speed=115200
lopy4.menu.UploadSpeed.256000.windows=256000
lopy4.menu.UploadSpeed.256000.upload.speed=256000
lopy4.menu.UploadSpeed.230400.windows.upload.speed=256000
lopy4.menu.UploadSpeed.230400=230400
lopy4.menu.UploadSpeed.230400.upload.speed=230400
lopy4.menu.UploadSpeed.460800.linux=460800
lopy4.menu.UploadSpeed.460800.macosx=460800
lopy4.menu.UploadSpeed.460800.upload.speed=460800
lopy4.menu.UploadSpeed.512000.windows=512000
lopy4.menu.UploadSpeed.512000.upload.speed=512000
lopy4.menu.DebugLevel.none=None
lopy4.menu.DebugLevel.none.build.code_debug=0
lopy4.menu.DebugLevel.error=Error
lopy4.menu.DebugLevel.error.build.code_debug=1
lopy4.menu.DebugLevel.warn=Warn
lopy4.menu.DebugLevel.warn.build.code_debug=2
lopy4.menu.DebugLevel.info=Info
lopy4.menu.DebugLevel.info.build.code_debug=3
lopy4.menu.DebugLevel.debug=Debug
lopy4.menu.DebugLevel.debug.build.code_debug=4
lopy4.menu.DebugLevel.verbose=Verbose
lopy4.menu.DebugLevel.verbose.build.code_debug=5
Add OROCA EduBot Board (#2264)
2019-01-06 20:47:55 +01:00
##############################################################
oroca_edubot.name=OROCA EduBot
oroca_edubot.upload.tool=esptool_py
oroca_edubot.upload.maximum_size=1310720
oroca_edubot.upload.maximum_data_size=327680
oroca_edubot.upload.wait_for_upload_port=true
oroca_edubot.serial.disableDTR=true
oroca_edubot.serial.disableRTS=true
oroca_edubot.build.mcu=esp32
oroca_edubot.build.core=esp32
oroca_edubot.build.variant=oroca_edubot
oroca_edubot.build.board=OROCA_EDUBOT
oroca_edubot.build.f_cpu=240000000L
oroca_edubot.build.flash_mode=dio
oroca_edubot.build.flash_size=4MB
oroca_edubot.build.boot=dio
oroca_edubot.build.partitions=default
oroca_edubot.build.defines=
oroca_edubot.menu.FlashFreq.80=80MHz
oroca_edubot.menu.FlashFreq.80.build.flash_freq=80m
oroca_edubot.menu.FlashFreq.40=40MHz
oroca_edubot.menu.FlashFreq.40.build.flash_freq=40m
oroca_edubot.menu.UploadSpeed.921600=921600
oroca_edubot.menu.UploadSpeed.921600.upload.speed=921600
oroca_edubot.menu.UploadSpeed.115200=115200
oroca_edubot.menu.UploadSpeed.115200.upload.speed=115200
oroca_edubot.menu.UploadSpeed.256000.windows=256000
oroca_edubot.menu.UploadSpeed.256000.upload.speed=256000
oroca_edubot.menu.UploadSpeed.230400.windows.upload.speed=256000
oroca_edubot.menu.UploadSpeed.230400=230400
oroca_edubot.menu.UploadSpeed.230400.upload.speed=230400
oroca_edubot.menu.UploadSpeed.460800.linux=460800
oroca_edubot.menu.UploadSpeed.460800.macosx=460800
oroca_edubot.menu.UploadSpeed.460800.upload.speed=460800
oroca_edubot.menu.UploadSpeed.512000.windows=512000
oroca_edubot.menu.UploadSpeed.512000.upload.speed=512000
oroca_edubot.menu.DebugLevel.none=None
oroca_edubot.menu.DebugLevel.none.build.code_debug=0
oroca_edubot.menu.DebugLevel.error=Error
oroca_edubot.menu.DebugLevel.error.build.code_debug=1
oroca_edubot.menu.DebugLevel.warn=Warn
oroca_edubot.menu.DebugLevel.warn.build.code_debug=2
oroca_edubot.menu.DebugLevel.info=Info
oroca_edubot.menu.DebugLevel.info.build.code_debug=3
oroca_edubot.menu.DebugLevel.debug=Debug
oroca_edubot.menu.DebugLevel.debug.build.code_debug=4
oroca_edubot.menu.DebugLevel.verbose=Verbose
oroca_edubot.menu.DebugLevel.verbose.build.code_debug=5
Reference in New Issue Copy Permalink