jacob.eva/arduino-esp32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update IDF to 9274814 (#767)

Browse Source 
* Update IDF to 9274814

* Fix error in i2c and Arduino
This commit is contained in:
Me No Dev 2017-10-24 00:21:00 +02:00 committed by GitHub
parent 95123681d5
commit 55289a45af
99 changed files with 1011 additions and 1302 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
cores/esp32/esp32-hal-i2c.c
View File

@ -340,7 +340,8 @@ i2c_err_t i2cRead(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data
// Save bytes from the buffer as they arrive instead of doing them at the end of the loop since there is no
// pause from an END operation in this approach.
if((!isEndNear) && (nextCmdCount < 2)) {
if (willRead = ((len>32)?32:len)) {
willRead = ((len>32)?32:len);
if (willRead > 0) {
if (willRead > 1) {
i2cSetCmd(i2c, cmdIdx, I2C_CMD_READ, (amountRead[ inc( &cmdIdx ) ] = willRead -1), false, false, false);
nextCmdCount++;

BIN
tools/sdk/bin/bootloader.bin
View File

Binary file not shown.

BIN
tools/sdk/bin/bootloader_qio.bin
View File

Binary file not shown.

3
tools/sdk/include/config/sdkconfig.h
View File

@ -68,7 +68,6 @@
#define CONFIG_CONSOLE_UART_NUM 0
#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE 1
#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
#define CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
#define CONFIG_TCP_OVERSIZE_MSS 1
#define CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS 1
#define CONFIG_CONSOLE_UART_DEFAULT 1
@ -85,7 +84,7 @@
#define CONFIG_TCPIP_TASK_STACK_SIZE 2560
#define CONFIG_FATFS_CODEPAGE_850 1
#define CONFIG_TASK_WDT 1
#define CONFIG_MAIN_TASK_STACK_SIZE 8192
#define CONFIG_MAIN_TASK_STACK_SIZE 4096
#define CONFIG_SPIFFS_PAGE_CHECK 1
#define CONFIG_TASK_WDT_TIMEOUT_S 5
#define CONFIG_INT_WDT_TIMEOUT_MS 300

2
tools/sdk/include/console/esp_console.h
View File

@ -107,6 +107,8 @@ esp_err_t esp_console_cmd_register(const esp_console_cmd_t *cmd);
* @param[out] cmd_ret return code from the command (set if command was run)
* @return
* - ESP_OK, if command was run
* - ESP_ERR_INVALID_ARG, if the command line is empty, or only contained
* whitespace
* - ESP_ERR_NOT_FOUND, if command with given name wasn't registered
* - ESP_ERR_INVALID_STATE, if esp_console_init wasn't called
*/

142
tools/sdk/include/driver/driver/adc.h
View File

@ -20,24 +20,38 @@ extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "driver/gpio.h"
#include "soc/adc_channel.h"
typedef enum {
ADC_ATTEN_0db = 0, /*!<The input voltage of ADC will be reduced to about 1/1 */
ADC_ATTEN_2_5db = 1, /*!<The input voltage of ADC will be reduced to about 1/1.34 */
ADC_ATTEN_6db = 2, /*!<The input voltage of ADC will be reduced to about 1/2 */
ADC_ATTEN_11db = 3, /*!<The input voltage of ADC will be reduced to about 1/3.6*/
ADC_ATTEN_DB_0 = 0, /*!<The input voltage of ADC will be reduced to about 1/1 */
ADC_ATTEN_DB_2_5 = 1, /*!<The input voltage of ADC will be reduced to about 1/1.34 */
ADC_ATTEN_DB_6 = 2, /*!<The input voltage of ADC will be reduced to about 1/2 */
ADC_ATTEN_DB_11 = 3, /*!<The input voltage of ADC will be reduced to about 1/3.6*/
ADC_ATTEN_MAX,
} adc_atten_t;
typedef enum {
ADC_WIDTH_9Bit = 0, /*!< ADC capture width is 9Bit*/
ADC_WIDTH_10Bit = 1, /*!< ADC capture width is 10Bit*/
ADC_WIDTH_11Bit = 2, /*!< ADC capture width is 11Bit*/
ADC_WIDTH_12Bit = 3, /*!< ADC capture width is 12Bit*/
ADC_WIDTH_BIT_9 = 0, /*!< ADC capture width is 9Bit*/
ADC_WIDTH_BIT_10 = 1, /*!< ADC capture width is 10Bit*/
ADC_WIDTH_BIT_11 = 2, /*!< ADC capture width is 11Bit*/
ADC_WIDTH_BIT_12 = 3, /*!< ADC capture width is 12Bit*/
ADC_WIDTH_MAX,
} adc_bits_width_t;
//this definitions are only for being back-compatible
#define ADC_ATTEN_0db ADC_ATTEN_DB_0
#define ADC_ATTEN_2_5db ADC_ATTEN_DB_2_5
#define ADC_ATTEN_6db ADC_ATTEN_DB_6
#define ADC_ATTEN_11db ADC_ATTEN_DB_11
//this definitions are only for being back-compatible
#define ADC_WIDTH_9Bit ADC_WIDTH_BIT_9
#define ADC_WIDTH_10Bit ADC_WIDTH_BIT_10
#define ADC_WIDTH_11Bit ADC_WIDTH_BIT_11
#define ADC_WIDTH_12Bit ADC_WIDTH_BIT_12
typedef enum {
ADC1_CHANNEL_0 = 0, /*!< ADC1 channel 0 is GPIO36 */
ADC1_CHANNEL_1, /*!< ADC1 channel 1 is GPIO37 */
@ -64,11 +78,43 @@ typedef enum {
ADC2_CHANNEL_MAX,
} adc2_channel_t;
typedef enum {
ADC_CHANNEL_0 = 0, /*!< ADC channel */
ADC_CHANNEL_1, /*!< ADC channel */
ADC_CHANNEL_2, /*!< ADC channel */
ADC_CHANNEL_3, /*!< ADC channel */
ADC_CHANNEL_4, /*!< ADC channel */
ADC_CHANNEL_5, /*!< ADC channel */
ADC_CHANNEL_6, /*!< ADC channel */
ADC_CHANNEL_7, /*!< ADC channel */
ADC_CHANNEL_8, /*!< ADC channel */
ADC_CHANNEL_9, /*!< ADC channel */
ADC_CHANNEL_MAX,
} adc_channel_t;
typedef enum {
ADC_UNIT_1 = 1, /*!< SAR ADC 1*/
ADC_UNIT_2 = 2, /*!< SAR ADC 2, not supported yet*/
ADC_UNIT_BOTH = 3, /*!< SAR ADC 1 and 2, not supported yet */
ADC_UNIT_ALTER = 7, /*!< SAR ADC 1 and 2 alternative mode, not supported yet */
ADC_UNIT_MAX,
} adc_unit_t;
typedef enum {
ADC_ENCODE_12BIT, /*!< ADC to I2S data format, [15:12]-channel [11:0]-12 bits ADC data */
ADC_ENCODE_11BIT, /*!< ADC to I2S data format, [15]-1 [14:11]-channel [10:0]-11 bits ADC data */
ADC_ENCODE_MAX,
} adc_i2s_encode_t;
typedef enum {
ADC_I2S_DATA_SRC_IO_SIG = 0, /*!< I2S data from GPIO matrix signal */
ADC_I2S_DATA_SRC_ADC = 1, /*!< I2S data from ADC */
ADC_I2S_DATA_SRC_MAX,
} adc_i2s_source_t;
/**
* @brief Configure ADC1 capture width.
*
* @brief Configure ADC1 capture width, meanwhile enable output invert for ADC1.
* The configuration is for all channels of ADC1
*
* @param width_bit Bit capture width for ADC1
*
* @return
@ -77,6 +123,16 @@ typedef enum {
*/
esp_err_t adc1_config_width(adc_bits_width_t width_bit);
/**
* @brief Configure ADC capture width.
* @param adc_unit ADC unit index
* @param width_bit Bit capture width for ADC unit.
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_set_data_width(adc_unit_t adc_unit, adc_bits_width_t width_bit);
/**
* @brief Configure the ADC1 channel, including setting attenuation.
*
@ -89,10 +145,10 @@ esp_err_t adc1_config_width(adc_bits_width_t width_bit);
*
* When VDD_A is 3.3V:
*
* - 0dB attenuaton (ADC_ATTEN_0db) gives full-scale voltage 1.1V
* - 2.5dB attenuation (ADC_ATTEN_2_5db) gives full-scale voltage 1.5V
* - 6dB attenuation (ADC_ATTEN_6db) gives full-scale voltage 2.2V
* - 11dB attenuation (ADC_ATTEN_11db) gives full-scale voltage 3.9V (see note below)
* - 0dB attenuaton (ADC_ATTEN_DB_0) gives full-scale voltage 1.1V
* - 2.5dB attenuation (ADC_ATTEN_DB_2_5) gives full-scale voltage 1.5V
* - 6dB attenuation (ADC_ATTEN_DB_6) gives full-scale voltage 2.2V
* - 11dB attenuation (ADC_ATTEN_DB_11) gives full-scale voltage 3.9V (see note below)
*
* @note The full-scale voltage is the voltage corresponding to a maximum reading (depending on ADC1 configured
* bit width, this value is: 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.)
@ -134,6 +190,62 @@ int adc1_get_raw(adc1_channel_t channel);
int adc1_get_voltage(adc1_channel_t channel) __attribute__((deprecated));
/** @endcond */
/**
* @brief Power on SAR ADC
*/
void adc_power_on();
/**
* @brief Power off SAR ADC
*/
void adc_power_off();
/**
* @brief Initialize ADC pad
* @param adc_unit ADC unit index
* @param channel ADC channel index
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_gpio_init(adc_unit_t adc_unit, adc_channel_t channel);
/**
* @brief Set ADC data invert
* @param adc_unit ADC unit index
* @param inv_en whether enable data invert
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_set_data_inv(adc_unit_t adc_unit, bool inv_en);
/**
* @brief Set ADC source clock
* @param clk_div ADC clock divider, ADC clock is divided from APB clock
* @return
* - ESP_OK success
*/
esp_err_t adc_set_clk_div(uint8_t clk_div);
/**
* @brief Set I2S data source
* @param src I2S DMA data source, I2S DMA can get data from digital signals or from ADC.
* @return
* - ESP_OK success
*/
esp_err_t adc_set_i2s_data_source(adc_i2s_source_t src);
/**
* @brief Initialize I2S ADC mode
* @param adc_unit ADC unit index
* @param channel ADC channel index
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_i2s_mode_init(adc_unit_t adc_unit, adc_channel_t channel);
/**
* @brief Configure ADC1 to be usable by the ULP
*

27
tools/sdk/include/driver/driver/i2c.h
View File

@ -200,7 +200,7 @@ esp_err_t i2c_isr_free(intr_handle_t handle);
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t i2c_set_pin(i2c_port_t i2c_num, gpio_num_t sda_io_num, gpio_num_t scl_io_num,
esp_err_t i2c_set_pin(i2c_port_t i2c_num, int sda_io_num, int scl_io_num,
gpio_pullup_t sda_pullup_en, gpio_pullup_t scl_pullup_en, i2c_mode_t mode);
/**
@ -341,7 +341,7 @@ esp_err_t i2c_master_stop(i2c_cmd_handle_t cmd_handle);
* - ESP_ERR_INVALID_STATE I2C driver not installed or not in master mode.
* - ESP_ERR_TIMEOUT Operation timeout because the bus is busy.
*/
esp_err_t i2c_master_cmd_begin(i2c_port_t i2c_num, i2c_cmd_handle_t cmd_handle, portBASE_TYPE ticks_to_wait);
esp_err_t i2c_master_cmd_begin(i2c_port_t i2c_num, i2c_cmd_handle_t cmd_handle, TickType_t ticks_to_wait);
/**
* @brief I2C slave write data to internal ringbuffer, when tx fifo empty, isr will fill the hardware
@ -358,7 +358,7 @@ esp_err_t i2c_master_cmd_begin(i2c_port_t i2c_num, i2c_cmd_handle_t cmd_handle,
* - ESP_FAIL(-1) Parameter error
* - Others(>=0) The number of data bytes that pushed to the I2C slave buffer.
*/
int i2c_slave_write_buffer(i2c_port_t i2c_num, uint8_t* data, int size, portBASE_TYPE ticks_to_wait);
int i2c_slave_write_buffer(i2c_port_t i2c_num, uint8_t* data, int size, TickType_t ticks_to_wait);
/**
* @brief I2C slave read data from internal buffer. When I2C slave receive data, isr will copy received data
@ -375,7 +375,7 @@ int i2c_slave_write_buffer(i2c_port_t i2c_num, uint8_t* data, int size, portBASE
* - ESP_FAIL(-1) Parameter error
* - Others(>=0) The number of data bytes that read from I2C slave buffer.
*/
int i2c_slave_read_buffer(i2c_port_t i2c_num, uint8_t* data, size_t max_size, portBASE_TYPE ticks_to_wait);
int i2c_slave_read_buffer(i2c_port_t i2c_num, uint8_t* data, size_t max_size, TickType_t ticks_to_wait);
/**
* @brief set I2C master clock period
@ -481,6 +481,25 @@ esp_err_t i2c_set_data_timing(i2c_port_t i2c_num, int sample_time, int hold_time
*/
esp_err_t i2c_get_data_timing(i2c_port_t i2c_num, int* sample_time, int* hold_time);
/**
* @brief set I2C timeout value
* @param i2c_num I2C port number
* @param timeout timeout value for I2C bus (unit: APB 80Mhz clock cycle)
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t i2c_set_timeout(i2c_port_t i2c_num, int timeout);
/**
* @brief get I2C timeout value
* @param i2c_num I2C port number
* @param timeout pointer to get timeout value
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t i2c_get_timeout(i2c_port_t i2c_num, int* timeout);
/**
* @brief set I2C data transfer mode
*

14
tools/sdk/include/driver/driver/i2s.h
View File

@ -26,6 +26,7 @@
#include "esp_attr.h"
#include "esp_intr_alloc.h"
#include "driver/periph_ctrl.h"
#include "driver/adc.h"
#include "freertos/semphr.h"
#ifdef __cplusplus
@ -118,7 +119,7 @@ typedef enum {
I2S_MODE_TX = 4,
I2S_MODE_RX = 8,
I2S_MODE_DAC_BUILT_IN = 16, /*!< Output I2S data to built-in DAC, no matter the data format is 16bit or 32 bit, the DAC module will only take the 8bits from MSB*/
//I2S_MODE_ADC_BUILT_IN = 32, /*!< Currently not supported yet, will be added for the next version*/
I2S_MODE_ADC_BUILT_IN = 32, /*!< Input I2S data from built-in ADC, each data can be 12-bit width at most*/
I2S_MODE_PDM = 64,
} i2s_mode_t;
@ -405,6 +406,17 @@ esp_err_t i2s_zero_dma_buffer(i2s_port_t i2s_num);
*/
esp_err_t i2s_set_clk(i2s_port_t i2s_num, uint32_t rate, i2s_bits_per_sample_t bits, i2s_channel_t ch);
/**
* @brief Set built-in ADC mode for I2S DMA, this function will initialize ADC pad,
* and set ADC parameters.
* @param adc_unit SAR ADC unit index
* @param adc_channel ADC channel index
* @return
* - ESP_OK Success
* - ESP_FAIL Parameter error
*/
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
#ifdef __cplusplus
}
#endif

2
tools/sdk/include/driver/driver/sdmmc_types.h
View File

@ -102,6 +102,7 @@ typedef struct {
#define SCF_RSP_R6 (SCF_RSP_PRESENT|SCF_RSP_CRC|SCF_RSP_IDX)
#define SCF_RSP_R7 (SCF_RSP_PRESENT|SCF_RSP_CRC|SCF_RSP_IDX)
esp_err_t error; /*!< error returned from transfer */
int timeout_ms; /*!< response timeout, in milliseconds */
} sdmmc_command_t;
/**
@ -127,6 +128,7 @@ typedef struct {
esp_err_t (*set_card_clk)(int slot, uint32_t freq_khz); /*!< host function to set card clock frequency */
esp_err_t (*do_transaction)(int slot, sdmmc_command_t* cmdinfo); /*!< host function to do a transaction */
esp_err_t (*deinit)(void); /*!< host function to deinitialize the driver */
int command_timeout_ms; /*!< timeout, in milliseconds, of a single command. Set to 0 to use the default value. */
} sdmmc_host_t;
/**

1
tools/sdk/include/driver/driver/spi_slave.h
View File

@ -53,6 +53,7 @@ typedef struct {
*/
struct spi_slave_transaction_t {
size_t length; ///< Total data length, in bits
size_t trans_len; ///< Transaction data length, in bits
const void *tx_buffer; ///< Pointer to transmit buffer, or NULL for no MOSI phase
void *rx_buffer; ///< Pointer to receive buffer, or NULL for no MISO phase
void *user; ///< User-defined variable. Can be used to store eg transaction ID.

4
tools/sdk/include/driver/driver/touch_pad.h
View File

@ -31,8 +31,8 @@ typedef enum {
TOUCH_PAD_NUM5, /*!< Touch pad channel 5 is GPIO12*/
TOUCH_PAD_NUM6, /*!< Touch pad channel 6 is GPIO14*/
TOUCH_PAD_NUM7, /*!< Touch pad channel 7 is GPIO27*/
TOUCH_PAD_NUM8, /*!< Touch pad channel 8 is GPIO32*/
TOUCH_PAD_NUM9, /*!< Touch pad channel 9 is GPIO33*/
TOUCH_PAD_NUM8, /*!< Touch pad channel 8 is GPIO33*/
TOUCH_PAD_NUM9, /*!< Touch pad channel 9 is GPIO32*/
TOUCH_PAD_MAX,
} touch_pad_t;

3
tools/sdk/include/driver/driver/uart.h
View File

@ -106,7 +106,8 @@ typedef struct {
uart_parity_t parity; /*!< UART parity mode*/
uart_stop_bits_t stop_bits; /*!< UART stop bits*/
uart_hw_flowcontrol_t flow_ctrl; /*!< UART HW flow control mode (cts/rts)*/
uint8_t rx_flow_ctrl_thresh ; /*!< UART HW RTS threshold*/
uint8_t rx_flow_ctrl_thresh; /*!< UART HW RTS threshold*/
bool use_ref_tick; /*!< Set to true if UART should be clocked from REF_TICK */
} uart_config_t;
/**

34
tools/sdk/include/lwip/port/netif/wlanif.h → tools/sdk/include/esp32/esp32/pm.h Executable file → Normal file
View File

@ -1,9 +1,9 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
// Copyright 2016-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
@ -13,30 +13,30 @@
// limitations under the License.
#ifndef _WLAN_LWIP_IF_H_
#define _WLAN_LWIP_IF_H_
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "esp_wifi.h"
#include "esp_wifi_internal.h"
#include "lwip/err.h"
#include "soc/rtc.h"
#ifdef __cplusplus
extern "C" {
#endif
err_t wlanif_init_ap(struct netif *netif);
err_t wlanif_init_sta(struct netif *netif);
void wlanif_input(struct netif *netif, void *buffer, u16_t len, void* eb);
/**
* @brief Power management config for ESP32
*
* Pass a pointer to this structure as an argument to esp_pm_configure function.
*/
typedef struct {
rtc_cpu_freq_t max_cpu_freq; /*!< Maximum CPU frequency to use */
rtc_cpu_freq_t min_cpu_freq; /*!< Minimum CPU frequency to use when no frequency locks are taken */
bool light_sleep_enable; /*!< Enter light sleep when no locks are taken */
} esp_pm_config_esp32_t;
wifi_interface_t wifi_get_interface(void *dev);
void netif_reg_addr_change_cb(void* cb);
#ifdef __cplusplus
}
#endif
#endif /* _WLAN_LWIP_IF_H_ */

45
tools/sdk/include/esp32/esp_clk.h
View File

@ -18,20 +18,8 @@
* @file esp_clk.h
*
* This file contains declarations of clock related functions.
* These functions are used in ESP-IDF components, but should not be considered
* to be part of public API.
*/
/**
* @brief Initialize clock-related settings
*
* Called from cpu_start.c, not intended to be called from other places.
* This function configures the CPU clock, RTC slow and fast clocks, and
* performs RTC slow clock calibration.
*/
void esp_clk_init(void);
/**
* @brief Get the calibration value of RTC slow clock
*
@ -42,7 +30,6 @@ void esp_clk_init(void);
*/
uint32_t esp_clk_slowclk_cal_get();
/**
* @brief Update the calibration value of RTC slow clock
*
@ -55,10 +42,34 @@ uint32_t esp_clk_slowclk_cal_get();
void esp_clk_slowclk_cal_set(uint32_t value);
/**
* @brief Disables clock of some peripherals
* @brief Return current CPU clock frequency
* When frequency switching is performed, this frequency may change.
* However it is guaranteed that the frequency never changes with a critical
* section.
*
* Called from cpu_start.c, not intended to be called from other places.
* This function disables clock of useless peripherals when cpu starts.
* @return CPU clock frequency, in Hz
*/
void esp_perip_clk_init(void);
int esp_clk_cpu_freq(void);
/**
* @brief Return current APB clock frequency
*
* When frequency switching is performed, this frequency may change.
* However it is guaranteed that the frequency never changes with a critical
* section.
*
* @return APB clock frequency, in Hz
*/
int esp_clk_apb_freq(void);
/**
* @brief Read value of RTC counter, converting it to microseconds
* @attention The value returned by this function may change abruptly when
* calibration value of RTC counter is updated via esp_clk_slowclk_cal_set
* function. This should not happen unless application calls esp_clk_slowclk_cal_set.
* In ESP-IDF, esp_clk_slowclk_cal_set is only called in startup code.
*
* @return Value or RTC counter, expressed in microseconds
*/
uint64_t esp_clk_rtc_time();

16
tools/sdk/include/esp32/esp_crosscore_int.h
View File

@ -35,8 +35,20 @@ void esp_crosscore_int_init();
* This is used internally by FreeRTOS in multicore mode
* and should not be called by the user.
*
* @param coreID Core that should do the yielding
* @param core_id Core that should do the yielding
*/
void esp_crosscore_int_send_yield(int coreId);
void esp_crosscore_int_send_yield(int core_id);
/**
* Send an interrupt to a CPU indicating it should update its
* CCOMPARE1 value due to a frequency switch.
*
* This is used internally when dynamic frequency switching is
* enabled, and should not be called from application code.
*
* @param core_id Core that should update its CCOMPARE1 value
*/
void esp_crosscore_int_send_freq_switch(int core_id);
#endif

44
tools/sdk/include/esp32/esp_freertos_hooks.h
View File

@ -38,12 +38,13 @@ typedef void (*esp_freertos_tick_cb_t)();
* @warning Idle callbacks MUST NOT, UNDER ANY CIRCUMSTANCES, CALL
* A FUNCTION THAT MIGHT BLOCK.
*
* @param esp_freertos_idle_cb_t new_idle_cb : Callback to be called
* @param UBaseType_t cpuid : id of the core
* @param[in] new_idle_cb Callback to be called
* @param[in] cpuid id of the core
*
* @return ESP_OK : Callback registered to the specified core's idle hook
* @return ESP_ERR_NO_MEM : No more space on the specified core's idle hook to register callback
* @return ESP_ERR_INVALID_ARG : cpuid is invalid
* @return
* - ESP_OK: Callback registered to the specified core's idle hook
* - ESP_ERR_NO_MEM: No more space on the specified core's idle hook to register callback
* - ESP_ERR_INVALID_ARG: cpuid is invalid
*/
esp_err_t esp_register_freertos_idle_hook_for_cpu(esp_freertos_idle_cb_t new_idle_cb, UBaseType_t cpuid);
@ -56,32 +57,35 @@ esp_err_t esp_register_freertos_idle_hook_for_cpu(esp_freertos_idle_cb_t new_idl
* @warning Idle callbacks MUST NOT, UNDER ANY CIRCUMSTANCES, CALL
* A FUNCTION THAT MIGHT BLOCK.
*
* @param esp_freertos_idle_cb_t new_idle_cb : Callback to be called
* @param[in] new_idle_cb Callback to be called
*
* @return ESP_OK : Callback registered to the calling core's idle hook
* @return ESP_ERR_NO_MEM : No more space the calling core's idle hook to register callback
* @return
* - ESP_OK: Callback registered to the calling core's idle hook
* - ESP_ERR_NO_MEM: No more space on the calling core's idle hook to register callback
*/
esp_err_t esp_register_freertos_idle_hook(esp_freertos_idle_cb_t new_idle_cb);
/**
* @brief Register a callback to be called from the specified core's tick hook.
*
* @param esp_freertos_tick_cb_t new_tick_cb : Callback to be called
* @param UBaseType_t cpuid : id of the core
* @param[in] new_tick_cb Callback to be called
* @param[in] cpuid id of the core
*
* @return ESP_OK : Callback registered
* @return ESP_ERR_NO_MEM : No more space on the specified core's tick hook to register the callback
* @return ESP_ERR_INVALID_ARG : cpuid is invalid
* @return
* - ESP_OK: Callback registered to specified core's tick hook
* - ESP_ERR_NO_MEM: No more space on the specified core's tick hook to register the callback
* - ESP_ERR_INVALID_ARG: cpuid is invalid
*/
esp_err_t esp_register_freertos_tick_hook_for_cpu(esp_freertos_tick_cb_t new_tick_cb, UBaseType_t cpuid);
/**
* @brief Register a callback to be called from the calling core's tick hook.
*
* @param esp_freertos_tick_cb_t new_tick_cb : Callback to be called
* @param[in] new_tick_cb Callback to be called
*
* @return ESP_OK : Callback registered
* @return ESP_ERR_NO_MEM : No more space on the calling core's tick hook to register the callback
* @return
* - ESP_OK: Callback registered to the calling core's tick hook
* - ESP_ERR_NO_MEM: No more space on the calling core's tick hook to register the callback
*/
esp_err_t esp_register_freertos_tick_hook(esp_freertos_tick_cb_t new_tick_cb);
@ -91,9 +95,7 @@ esp_err_t esp_register_freertos_tick_hook(esp_freertos_tick_cb_t new_tick_cb);
* the idle hooks of both cores, the idle hook will be unregistered from
* both cores
*
* @param esp_freertos_idle_cb_t new_idle_cb : Callback to be unregistered
*
* @return void
* @param[in] old_idle_cb Callback to be unregistered
*/
void esp_deregister_freertos_idle_hook(esp_freertos_idle_cb_t old_idle_cb);
@ -103,9 +105,7 @@ void esp_deregister_freertos_idle_hook(esp_freertos_idle_cb_t old_idle_cb);
* tick hooks of both cores, the tick hook will be unregistered from
* both cores
*
* @param esp_freertos_idle_cb_t new_idle_cb : Callback to be unregistered
*
* @return void
* @param[in] old_tick_cb Callback to be unregistered
*/
void esp_deregister_freertos_tick_hook(esp_freertos_tick_cb_t old_tick_cb);

179
tools/sdk/include/esp32/esp_pm.h Normal file
View File

@ -0,0 +1,179 @@
// Copyright 2016-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
// Include SoC-specific definitions. Only ESP32 supported for now.
#include "esp32/pm.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Power management constraints
*/
typedef enum {
/**
* Require CPU frequency to be at the maximum value set via esp_pm_configure.
* Argument is unused and should be set to 0.
*/
ESP_PM_CPU_FREQ_MAX,
/**
* Require APB frequency to be at the maximum value supported by the chip.
* Argument is unused and should be set to 0.
*/
ESP_PM_APB_FREQ_MAX,
/**
* Prevent the system from going into light sleep.
* Argument is unused and should be set to 0.
*/
ESP_PM_NO_LIGHT_SLEEP,
} esp_pm_lock_type_t;
/**
* @brief Set implementation-specific power management configuration
* @param config pointer to implementation-specific configuration structure (e.g. esp_pm_config_esp32)
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the configuration values are not correct
* - ESP_ERR_NOT_SUPPORTED if certain combination of values is not supported,
* or if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_configure(const void* config);
/**
* @brief Opaque handle to the power management lock
*/
typedef struct esp_pm_lock* esp_pm_lock_handle_t;
/**
* @brief Initialize a lock handle for certain power management parameter
*
* When lock is created, initially it is not taken.
* Call esp_pm_lock_acquire to take the lock.
*
* This function must not be called from an ISR.
*
* @param lock_type Power management constraint which the lock should control
* @param arg argument, value depends on lock_type, see esp_pm_lock_type_t
* @param name arbitrary string identifying the lock (e.g. "wifi" or "spi").
* Used by the esp_pm_dump_locks function to list existing locks.
* May be set to NULL. If not set to NULL, must point to a string which is valid
* for the lifetime of the lock.
* @param[out] out_handle handle returned from this function. Use this handle when calling
* esp_pm_lock_delete, esp_pm_lock_acquire, esp_pm_lock_release.
* Must not be NULL.
* @return
* - ESP_OK on success
* - ESP_ERR_NO_MEM if the lock structure can not be allocated
* - ESP_ERR_INVALID_ARG if out_handle is NULL or type argument is not valid
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_create(esp_pm_lock_type_t lock_type, int arg,
const char* name, esp_pm_lock_handle_t* out_handle);
/**
* @brief Take a power management lock
*
* Once the lock is taken, power management algorithm will not switch to the
* mode specified in a call to esp_pm_lock_create, or any of the lower power
* modes (higher numeric values of 'mode').
*
* The lock is recursive, in the sense that if esp_pm_lock_acquire is called
* a number of times, esp_pm_lock_release has to be called the same number of
* times in order to release the lock.
*
* This function may be called from an ISR.
*
* This function is not thread-safe w.r.t. calls to other esp_pm_lock_*
* functions for the same handle.
*
* @param handle handle obtained from esp_pm_lock_create function
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle is invalid
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_acquire(esp_pm_lock_handle_t handle);
/**
* @brief Release the lock taken using esp_pm_lock_acquire.
*
* Call to this functions removes power management restrictions placed when
* taking the lock.
*
* Locks are recursive, so if esp_pm_lock_acquire is called a number of times,
* esp_pm_lock_release has to be called the same number of times in order to
* actually release the lock.
*
* This function may be called from an ISR.
*
* This function is not thread-safe w.r.t. calls to other esp_pm_lock_*
* functions for the same handle.
*
* @param handle handle obtained from esp_pm_lock_create function
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle is invalid
* - ESP_ERR_INVALID_STATE if lock is not acquired
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_release(esp_pm_lock_handle_t handle);
/**
* @brief Delete a lock created using esp_pm_lock
*
* The lock must be released before calling this function.
*
* This function must not be called from an ISR.
*
* @param handle handle obtained from esp_pm_lock_create function
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle argument is NULL
* - ESP_ERR_INVALID_STATE if the lock is still acquired
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_delete(esp_pm_lock_handle_t handle);
/**
* Dump the list of all locks to stderr
*
* This function dumps debugging information about locks created using
* esp_pm_lock_create to an output stream.
*
* This function must not be called from an ISR. If esp_pm_lock_acquire/release
* are called while this function is running, inconsistent results may be
* reported.
*
* @param stream stream to print information to; use stdout or stderr to print
* to the console; use fmemopen/open_memstream to print to a
* string buffer.
* @return
* - ESP_OK on success
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_dump_locks(FILE* stream);
#ifdef __cplusplus
}
#endif

11
tools/sdk/include/esp32/esp_spiram.h
View File

@ -27,6 +27,17 @@
*/
esp_err_t esp_spiram_init();
/**
* @brief Configure Cache/MMU for access to external SPI RAM.
*
* Normally this function is called from cpu_start, if CONFIG_SPIRAM_BOOT_INIT
* option is enabled. Applications which need to enable SPI RAM at run time
* can disable CONFIG_SPIRAM_BOOT_INIT, and call this function later.
*
* @attention this function must be called with flash cache disabled.
*/
void esp_spiram_init_cache();
/**
* @brief Memory test for SPI RAM. Should be called after SPI RAM is initialized and

226
tools/sdk/include/esp32/esp_timer.h Normal file
View File

@ -0,0 +1,226 @@
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
/**
* @file esp_timer.h
* @brief microsecond-precision 64-bit timer API, replacement for ets_timer
*
* esp_timer APIs allow components to receive callbacks when a hardware timer
* reaches certain value. The timer provides microsecond accuracy and
* up to 64 bit range. Note that while the timer itself provides microsecond
* accuracy, callbacks are dispatched from an auxiliary task. Some time is
* needed to notify this task from timer ISR, and then to invoke the callback.
* If more than one callback needs to be dispatched at any particular time,
* each subsequent callback will be dispatched only when the previous callback
* returns. Therefore, callbacks should not do much work; instead, they should
* use RTOS notification mechanisms (queues, semaphores, event groups, etc.) to
* pass information to other tasks.
*
* <to be implemented> It should be possible to request the callback to be called
* directly from the ISR. This reduces the latency, but has potential impact on
* all other callbacks which need to be dispatched. This option should only be
* used for simple callback functions, which do not take longer than a few
* microseconds to run. </to be implemented>
*
* Implementation note: on the ESP32, esp_timer APIs use the "legacy" FRC2
* timer. Timer callbacks are called from a task running on the PRO CPU.
*/
#include <stdint.h>
#include <stdio.h>
#include "esp_err.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Opaque type representing a single esp_timer
*/
typedef struct esp_timer* esp_timer_handle_t;
/**
* @brief Timer callback function type
* @param arg pointer to opaque user-specific data
*/
typedef void (*esp_timer_cb_t)(void* arg);
/**
* @brief Method for dispatching timer callback
*/
typedef enum {
ESP_TIMER_TASK, //!< Callback is called from timer task
/* Not supported for now, provision to allow callbacks to run directly
* from an ISR:
ESP_TIMER_ISR, //!< Callback is called from timer ISR
*/
} esp_timer_dispatch_t;
/**
* @brief Timer configuration passed to esp_timer_create
*/
typedef struct {
esp_timer_cb_t callback; //!< Function to call when timer expires
void* arg; //!< Argument to pass to the callback
esp_timer_dispatch_t dispatch_method; //!< Call the callback from task or from ISR
const char* name; //!< Timer name, used in esp_timer_dump function
} esp_timer_create_args_t;
/**
* @brief Initialize esp_timer library
*
* @note This function is called from startup code. Applications do not need
* to call this function before using other esp_timer APIs.
*
* @return
* - ESP_OK on success
* - ESP_ERR_NO_MEM if allocation has failed
* - ESP_ERR_INVALID_STATE if already initialized
* - other errors from interrupt allocator
*/
esp_err_t esp_timer_init();
/**
* @brief De-initialize esp_timer library
*
* @note Normally this function should not be called from applications
*
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_STATE if not yet initialized
*/
esp_err_t esp_timer_deinit();
/**
* @brief Create an esp_timer instance
*
* @note When done using the timer, delete it with esp_timer_delete function.
*
* @param create_args Pointer to a structure with timer creation arguments.
* Not saved by the library, can be allocated on the stack.
* @param[out] out_handle Output, pointer to esp_timer_handle_t variable which
* will hold the created timer handle.
*
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if some of the create_args are not valid
* - ESP_ERR_INVALID_STATE if esp_timer library is not initialized yet
* - ESP_ERR_NO_MEM if memory allocation fails
*/
esp_err_t esp_timer_create(const esp_timer_create_args_t* create_args,
esp_timer_handle_t* out_handle);
/**
* @brief Start one-shot timer
*
* Timer should not be running when this function is called.
*
* @param timer timer handle created using esp_timer_create
* @param timeout_us timer timeout, in microseconds relative to the current moment
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle is invalid
* - ESP_ERR_INVALID_STATE if the timer is already running
*/
esp_err_t esp_timer_start_once(esp_timer_handle_t timer, uint64_t timeout_us);
/**
* @brief Start a periodic timer
*
* Timer should not be running when this function is called. This function will
* start the timer which will trigger every 'period' microseconds.
*
* @param timer timer handle created using esp_timer_create
* @param period timer period, in microseconds
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle is invalid
* - ESP_ERR_INVALID_STATE if the timer is already running
*/
esp_err_t esp_timer_start_periodic(esp_timer_handle_t timer, uint64_t period);
/**
* @brief Stop the timer
*
* This function stops the timer previously started using esp_timer_start_once
* or esp_timer_start_periodic.
*
* @param timer timer handle created using esp_timer_create
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_STATE if the timer is not running
*/
esp_err_t esp_timer_stop(esp_timer_handle_t timer);
/**
* @brief Delete an esp_timer instance
*
* The timer must be stopped before deleting. A one-shot timer which has expired
* does not need to be stopped.
*
* @param timer timer handle allocated using esp_timer_create
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_STATE if the timer is not running
*/
esp_err_t esp_timer_delete(esp_timer_handle_t timer);
/**
* @brief Get time in microseconds since boot
* @return number of microseconds since esp_timer_init was called (this normally
* happens early during application startup).
*/
int64_t esp_timer_get_time();
/**
* @brief Dump the list of timers to a stream
*
* If CONFIG_ESP_TIMER_PROFILING option is enabled, this prints the list of all
* the existing timers. Otherwise, only the list active timers is printed.
*
* The format is:
*
* name period alarm times_armed times_triggered total_callback_run_time
*
* where:
*
* name — timer name (if CONFIG_ESP_TIMER_PROFILING is defined), or timer pointer
* period — period of timer, in microseconds, or 0 for one-shot timer
* alarm - time of the next alarm, in microseconds since boot, or 0 if the timer
* is not started
*
* The following fields are printed if CONFIG_ESP_TIMER_PROFILING is defined:
*
* times_armed — number of times the timer was armed via esp_timer_start_X
* times_triggered - number of times the callback was called
* total_callback_run_time - total time taken by callback to execute, across all calls
*
* @param stream stream (such as stdout) to dump the information to
* @return
* - ESP_OK on success
* - ESP_ERR_NO_MEM if can not allocate temporary buffer for the output
*/
esp_err_t esp_timer_dump(FILE* stream);
#ifdef __cplusplus
}
#endif

2
tools/sdk/include/esp_adc_cal/esp_adc_cal.h
View File

@ -71,7 +71,7 @@ typedef struct {
for uint32 arithmetic */
uint32_t offset; /**<Offset in mV used to correct LUT Voltages to current v_ref */
uint32_t ideal_offset; /**<Offset in mV at the ideal reference voltage */
adc_bits_width_t bit_width; /**<Bit width of ADC e.g. ADC_WIDTH_12Bit */
adc_bits_width_t bit_width; /**<Bit width of ADC e.g. ADC_WIDTH_BIT_12 */
const esp_adc_cal_lookup_table_t *table; /**<Pointer to LUT */
} esp_adc_cal_characteristics_t;

31
tools/sdk/include/freertos/freertos/FreeRTOSConfig.h
View File

@ -95,8 +95,20 @@
#define configNUM_THREAD_LOCAL_STORAGE_POINTERS CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS
#define configTHREAD_LOCAL_STORAGE_DELETE_CALLBACKS 1
/* TODO: config freq by menuconfig */
#define XT_CLOCK_FREQ (CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ * 1000000)
#ifndef __ASSEMBLER__
/**
* This function is defined to provide a deprecation warning whenever
* XT_CLOCK_FREQ macro is used.
* Update the code to use esp_clk_cpu_freq function instead.
* @return current CPU clock frequency, in Hz
*/
int xt_clock_freq(void) __attribute__((deprecated));
#define XT_CLOCK_FREQ (xt_clock_freq())
#endif // __ASSEMBLER__
/* Required for configuration-dependent settings */
#include "xtensa_config.h"
@ -190,8 +202,19 @@
#define configTOTAL_HEAP_SIZE (&_heap_end - &_heap_start)//( ( size_t ) (64 * 1024) )
#define configMAX_TASK_NAME_LEN ( CONFIG_FREERTOS_MAX_TASK_NAME_LEN )
#define configUSE_TRACE_FACILITY 0 /* Used by vTaskList in main.c */
#define configUSE_STATS_FORMATTING_FUNCTIONS 0 /* Used by vTaskList in main.c */
#ifdef CONFIG_FREERTOS_USE_TRACE_FACILITY
#define configUSE_TRACE_FACILITY 1 /* Used by uxTaskGetSystemState(), and other trace facility functions */
#endif
#ifdef CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS
#define configUSE_STATS_FORMATTING_FUNCTIONS 1 /* Used by vTaskList() */
#endif
#ifdef CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS
#define configGENERATE_RUN_TIME_STATS 1 /* Used by vTaskGetRunTimeStats() */
#endif
#define configUSE_TRACE_FACILITY_2 0 /* Provided by Xtensa port patch */
#define configBENCHMARK 0 /* Provided by Xtensa port patch */
#define configUSE_16_BIT_TICKS 0

2
tools/sdk/include/freertos/freertos/portmacro.h
View File

@ -203,7 +203,7 @@ void vPortCPUInitializeMutex(portMUX_TYPE *mux);
#ifdef CONFIG_FREERTOS_PORTMUX_DEBUG
void vPortCPUAcquireMutex(portMUX_TYPE *mux, const char *function, int line);
bool vPortCPUAcquireMutexTimeout(portMUX_TYPE *mux, int timeout_cycles, const char *function, int line);
portBASE_TYPE vPortCPUReleaseMutex(portMUX_TYPE *mux, const char *function, int line);
void vPortCPUReleaseMutex(portMUX_TYPE *mux, const char *function, int line);
void vTaskEnterCritical( portMUX_TYPE *mux, const char *function, int line );

2
tools/sdk/include/freertos/freertos/xtensa_rtos.h
View File

@ -55,7 +55,7 @@ Should be included by all Xtensa generic and RTOS port-specific sources.
/*
Include any RTOS specific definitions that are needed by this header.
*/
#include <FreeRTOSConfig.h>
#include "FreeRTOSConfig.h"
/*
Convert FreeRTOSConfig definitions to XTENSA definitions.

2
tools/sdk/include/freertos/freertos/xtensa_timer.h
View File

@ -49,7 +49,7 @@ and the Xtensa core configuration need not have a timer.
#include "xtensa_rtos.h" /* in case this wasn't included directly */
#include <FreeRTOSConfig.h>
#include "FreeRTOSConfig.h"
/*
Select timer to use for periodic tick, and determine its interrupt number

30
tools/sdk/include/heap/esp_heap_caps.h
View File

@ -276,3 +276,33 @@ void *heap_caps_realloc_prefer( void *ptr, size_t size, size_t num, ... );
* @return A pointer to the memory allocated on success, NULL on failure
*/
void *heap_caps_calloc_prefer( size_t n, size_t size, size_t num, ... );
/**
* @brief Dump the full structure of all heaps with matching capabilities.
*
* Prints a large amount of output to serial (because of locking limitations,
* the output bypasses stdout/stderr). For each (variable sized) block
* in each matching heap, the following output is printed on a single line:
*
* - Block address (the data buffer returned by malloc is 4 bytes after this
* if heap debugging is set to Basic, or 8 bytes otherwise).
* - Data size (the data size may be larger than the size requested by malloc,
* either due to heap fragmentation or because of heap debugging level).
* - Address of next block in the heap.
* - If the block is free, the address of the next free block is also printed.
*
* @param caps Bitwise OR of MALLOC_CAP_* flags indicating the type
* of memory
*/
void heap_caps_dump(uint32_t caps);
/**
* @brief Dump the full structure of all heaps.
*
* Covers all registered heaps. Prints a large amount of output to serial.
*
* Output is the same as for heap_caps_dump.
*
*/
void heap_caps_dump_all();

2
tools/sdk/include/heap/multi_heap.h
View File

@ -91,6 +91,8 @@ multi_heap_handle_t multi_heap_register(void *start, size_t size);
*
* The lock argument is supplied to the MULTI_HEAP_LOCK() and MULTI_HEAP_UNLOCK() macros, defined in multi_heap_platform.h.
*
* The lock in question must be recursive.
*
* When the heap is first registered, the associated lock is NULL.
*
* @param heap Handle to a registered heap.

23
tools/sdk/include/lwip/apps/dhcpserver.h
View File

@ -15,8 +15,6 @@
#define __DHCPS_H__
#include "lwip/ip_addr.h"
//#include "esp_common.h"
#define USE_DNS
typedef struct dhcps_state{
s16_t state;
@ -46,6 +44,7 @@ typedef struct {
enum dhcps_offer_option{
OFFER_START = 0x00,
OFFER_ROUTER = 0x01,
OFFER_DNS = 0x02,
OFFER_END
};
@ -63,17 +62,29 @@ typedef u32_t dhcps_time_t;
typedef u8_t dhcps_offer_t;
typedef struct {
dhcps_offer_t dhcps_offer;
dhcps_time_t dhcps_time;
dhcps_lease_t dhcps_poll;
dhcps_offer_t dhcps_offer;
dhcps_offer_t dhcps_dns;
dhcps_time_t dhcps_time;
dhcps_lease_t dhcps_poll;
} dhcps_options_t;
#define dhcps_router_enabled(offer) ((offer & OFFER_ROUTER) != 0)
static inline bool dhcps_router_enabled (dhcps_offer_t offer)
{
return (offer & OFFER_ROUTER) != 0;
}
static inline bool dhcps_dns_enabled (dhcps_offer_t offer)
{
return (offer & OFFER_DNS) != 0;
}
void dhcps_start(struct netif *netif, ip4_addr_t ip);
void dhcps_stop(struct netif *netif);
void *dhcps_option_info(u8_t op_id, u32_t opt_len);
void dhcps_set_option_info(u8_t op_id, void *opt_info, u32_t opt_len);
bool dhcp_search_ip_on_mac(u8_t *mac, ip4_addr_t *ip);
void dhcps_dns_setserver(const ip_addr_t *dnsserver);
ip4_addr_t dhcps_dns_getserver();
#endif

1
tools/sdk/include/lwip/arch/sys_arch.h
View File

@ -37,6 +37,7 @@
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/semphr.h"
#include "arch/vfs_lwip.h"
#ifdef __cplusplus
extern "C" {

21
tools/sdk/include/lwip/port/netif/ethernetif.h → tools/sdk/include/lwip/arch/vfs_lwip.h Executable file → Normal file
View File

@ -1,9 +1,9 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
@ -12,24 +12,17 @@
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _ETH_LWIP_IF_H_
#define _ETH_LWIP_IF_H_
#include "lwip/err.h"
#ifdef __cplusplus
extern "C" {
#endif
err_t ethernetif_init(struct netif *netif);
/* Internal declarations used to ingreate LWIP port layer
to ESP-IDF VFS for POSIX I/O.
*/
extern int lwip_socket_offset;
void ethernetif_input(struct netif *netif, void *buffer, u16_t len);
void netif_reg_addr_change_cb(void* cb);
void esp_vfs_lwip_sockets_register();
#ifdef __cplusplus
}
#endif
#endif /* _ETH_LWIP_IF_H_ */

1
tools/sdk/include/lwip/lwip/dns.h
View File

@ -96,6 +96,7 @@ typedef void (*dns_found_callback)(const char *name, const ip_addr_t *ipaddr, vo
void dns_init(void);
void dns_tmr(void);
void dns_setserver(u8_t numdns, const ip_addr_t *dnsserver);
void dns_clear_servers(bool keep_fallback);
ip_addr_t dns_getserver(u8_t numdns);
err_t dns_gethostbyname(const char *hostname, ip_addr_t *addr,
dns_found_callback found, void *callback_arg);

18
tools/sdk/include/lwip/lwipopts.h
View File

@ -34,6 +34,7 @@
#include <stdlib.h>
#include <time.h>
#include <unistd.h>
#include <sys/time.h>
#include <sys/fcntl.h>
#include "esp_task.h"
@ -271,6 +272,9 @@
*/
#define LWIP_DNS 1
#define DNS_MAX_SERVERS 3
#define DNS_FALLBACK_SERVER_INDEX (DNS_MAX_SERVERS - 1)
/*
---------------------------------
---------- UDP options ----------
@ -687,6 +691,19 @@
#define ETHARP_TRUST_IP_MAC CONFIG_LWIP_ETHARP_TRUST_IP_MAC
/**
* POSIX I/O functions are mapped to LWIP via the VFS layer
* (see port/vfs_lwip.c)
*/
#define LWIP_POSIX_SOCKETS_IO_NAMES 0
/**
* Socket offset is also determined via the VFS layer at
* filesystem registration time (see port/vfs_lwip.c)
*/
#define LWIP_SOCKET_OFFSET lwip_socket_offset
/* Enable all Espressif-only options */
#define ESP_LWIP 1
@ -707,6 +724,7 @@
#define ESP_STATS_TCP 0
#define ESP_DHCP_TIMER 1
#define ESP_LWIP_LOGI(...) ESP_LOGI("lwip", __VA_ARGS__)
#define ESP_PING 1
#define TCP_WND_DEFAULT CONFIG_TCP_WND_DEFAULT
#define TCP_SND_BUF_DEFAULT CONFIG_TCP_SND_BUF_DEFAULT

94
tools/sdk/include/lwip/port/arch/cc.h
View File

@ -1,94 +0,0 @@
/*
* Copyright (c) 2001, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#ifndef __ARCH_CC_H__
#define __ARCH_CC_H__
#include <stdint.h>
#include <errno.h>
#include <assert.h>
#include <stdio.h>
#include "arch/sys_arch.h"
#define BYTE_ORDER LITTLE_ENDIAN
typedef uint8_t u8_t;
typedef int8_t s8_t;
typedef uint16_t u16_t;
typedef int16_t s16_t;
typedef uint32_t u32_t;
typedef int32_t s32_t;
typedef unsigned long mem_ptr_t;
typedef int sys_prot_t;
#define S16_F "d"
#define U16_F "d"
#define X16_F "x"
#define S32_F "d"
#define U32_F "d"
#define X32_F "x"
#define PACK_STRUCT_FIELD(x) x
#define PACK_STRUCT_STRUCT __attribute__((packed))
#define PACK_STRUCT_BEGIN
#define PACK_STRUCT_END
#include <stdio.h>
#define LWIP_PLATFORM_DIAG(x) do {printf x;} while(0)
// __assert_func is the assertion failure handler from newlib, defined in assert.h
#define LWIP_PLATFORM_ASSERT(message) __assert_func(__FILE__, __LINE__, __ASSERT_FUNC, message)
#ifdef NDEBUG
#define LWIP_NOASSERT
#else // Assertions enabled
// If assertions are on, the default LWIP_ERROR handler behaviour is to
// abort w/ an assertion failure. Don't do this, instead just print the error (if LWIP_DEBUG is set)
// and run the handler (same as the LWIP_ERROR behaviour if LWIP_NOASSERT is set).
#ifdef LWIP_DEBUG
#define LWIP_ERROR(message, expression, handler) do { if (!(expression)) { \
puts(message); handler;}} while(0)
#else
// If LWIP_DEBUG is not set, return the error silently (default LWIP behaviour, also.)
#define LWIP_ERROR(message, expression, handler) do { if (!(expression)) { \
handler;}} while(0)
#endif // LWIP_DEBUG
#endif /* NDEBUG */
#endif /* __ARCH_CC_H__ */

40
tools/sdk/include/lwip/port/arch/perf.h
View File

@ -1,40 +0,0 @@
/*
* Copyright (c) 2001, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#ifndef __PERF_H__
#define __PERF_H__
#define PERF_START /* null definition */
#define PERF_STOP(x) /* null definition */
#endif /* __PERF_H__ */

80
tools/sdk/include/lwip/port/arch/sys_arch.h
View File

@ -1,80 +0,0 @@
/*
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#ifndef __SYS_ARCH_H__
#define __SYS_ARCH_H__
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/semphr.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef xSemaphoreHandle sys_sem_t;
typedef xSemaphoreHandle sys_mutex_t;
typedef xTaskHandle sys_thread_t;
typedef struct sys_mbox_s {
xQueueHandle os_mbox;
sys_mutex_t lock;
uint8_t alive;
}* sys_mbox_t;
#define LWIP_COMPAT_MUTEX 0
#if !LWIP_COMPAT_MUTEX
#define sys_mutex_valid( x ) ( ( ( *x ) == NULL) ? pdFALSE : pdTRUE )
#define sys_mutex_set_invalid( x ) ( ( *x ) = NULL )
#endif
#define sys_mbox_valid( x ) ( ( ( *x ) == NULL) ? pdFALSE : pdTRUE )
#define sys_mbox_set_invalid( x ) ( ( *x ) = NULL )
#define sys_sem_valid( x ) ( ( ( *x ) == NULL) ? pdFALSE : pdTRUE )
#define sys_sem_set_invalid( x ) ( ( *x ) = NULL )
void sys_delay_ms(uint32_t ms);
sys_sem_t* sys_thread_sem_init(void);
void sys_thread_sem_deinit(void);
sys_sem_t* sys_thread_sem_get(void);
#ifdef __cplusplus
}
#endif
#endif /* __SYS_ARCH_H__ */

20
tools/sdk/include/lwip/port/arpa/inet.h
View File

@ -1,20 +0,0 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef INET_H_
#define INET_H_
#include "lwip/inet.h"
#endif /* INET_H_ */

775
tools/sdk/include/lwip/port/lwipopts.h
View File

@ -1,775 +0,0 @@
/*
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Simon Goldschmidt
*
*/
#ifndef __LWIPOPTS_H__
#define __LWIPOPTS_H__
#include <stdlib.h>
#include <time.h>
#include <sys/time.h>
#include <sys/fcntl.h>
#include "esp_task.h"
#include "esp_system.h"
#include "sdkconfig.h"
/* Enable all Espressif-only options */
/*
-----------------------------------------------
---------- Platform specific locking ----------
-----------------------------------------------
*/
/**
* SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
* critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#define SYS_LIGHTWEIGHT_PROT 1
/**
* MEMCPY: override this if you have a faster implementation at hand than the
* one included in your C library
*/
#define MEMCPY(dst,src,len) memcpy(dst,src,len)
/**
* SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
* call to memcpy() if the length is known at compile time and is small.
*/
#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
#define LWIP_RAND esp_random
/*
------------------------------------
---------- Memory options ----------
------------------------------------
*/
/**
* MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
* instead of the lwip internal allocator. Can save code size if you
* already use it.
*/
#define MEM_LIBC_MALLOC 1
/**
* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
* speed and usage from interrupts!
*/
#define MEMP_MEM_MALLOC 1
/**
* MEM_ALIGNMENT: should be set to the alignment of the CPU
* 4 byte alignment -> #define MEM_ALIGNMENT 4
* 2 byte alignment -> #define MEM_ALIGNMENT 2
*/
#define MEM_ALIGNMENT 4
/*
------------------------------------------------
---------- Internal Memory Pool Sizes ----------
------------------------------------------------
*/
/**
* MEMP_NUM_NETCONN: the number of struct netconns.
* (only needed if you use the sequential API, like api_lib.c)
*/
#define MEMP_NUM_NETCONN CONFIG_LWIP_MAX_SOCKETS
/**
* MEMP_NUM_RAW_PCB: Number of raw connection PCBs
* (requires the LWIP_RAW option)
*/
#define MEMP_NUM_RAW_PCB 16
/**
* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
* (requires the LWIP_TCP option)
*/
#define MEMP_NUM_TCP_PCB 16
/**
* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
* (requires the LWIP_TCP option)
*/
#define MEMP_NUM_TCP_PCB_LISTEN 16
/**
* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
* per active UDP "connection".
* (requires the LWIP_UDP option)
*/
#define MEMP_NUM_UDP_PCB 16
/*
--------------------------------
---------- ARP options -------
--------------------------------
*/
/**
* ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
* resolution. By default, only the most recent packet is queued per IP address.
* This is sufficient for most protocols and mainly reduces TCP connection
* startup time. Set this to 1 if you know your application sends more than one
* packet in a row to an IP address that is not in the ARP cache.
*/
#define ARP_QUEUEING 1
/*
--------------------------------
---------- IP options ----------
--------------------------------
*/
/**
* IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
* this option does not affect outgoing packet sizes, which can be controlled
* via IP_FRAG.
*/
#define IP_REASSEMBLY CONFIG_LWIP_IP_REASSEMBLY
/**
* IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
* that this option does not affect incoming packet sizes, which can be
* controlled via IP_REASSEMBLY.
*/
#define IP_FRAG CONFIG_LWIP_IP_FRAG
/**
* IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
* a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
* in this time, the whole packet is discarded.
*/
#define IP_REASS_MAXAGE 3
/**
* IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
* Since the received pbufs are enqueued, be sure to configure
* PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
* packets even if the maximum amount of fragments is enqueued for reassembly!
*/
#define IP_REASS_MAX_PBUFS 10
/*
----------------------------------
---------- ICMP options ----------
----------------------------------
*/
#define LWIP_BROADCAST_PING CONFIG_LWIP_BROADCAST_PING
#define LWIP_MULTICAST_PING CONFIG_LWIP_MULTICAST_PING
/*
---------------------------------
---------- RAW options ----------
---------------------------------
*/
/**
* LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
*/
#define LWIP_RAW 1
/*
----------------------------------
---------- DHCP options ----------
----------------------------------
*/
/**
* LWIP_DHCP==1: Enable DHCP module.
*/
#define LWIP_DHCP 1
#define DHCP_MAXRTX 0
/**
* DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
*/
#define DHCP_DOES_ARP_CHECK CONFIG_LWIP_DHCP_DOES_ARP_CHECK
/*
------------------------------------
---------- AUTOIP options ----------
------------------------------------
*/
#ifdef CONFIG_LWIP_AUTOIP
#define LWIP_AUTOIP 1
/**
* LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
* the same interface at the same time.
*/
#define LWIP_DHCP_AUTOIP_COOP 1
/**
* LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
* that should be sent before falling back on AUTOIP. This can be set
* as low as 1 to get an AutoIP address very quickly, but you should
* be prepared to handle a changing IP address when DHCP overrides
* AutoIP.
*/
#define LWIP_DHCP_AUTOIP_COOP_TRIES CONFIG_LWIP_AUTOIP_TRIES
#define LWIP_AUTOIP_MAX_CONFLICTS CONFIG_LWIP_AUTOIP_MAX_CONFLICTS
#define LWIP_AUTOIP_RATE_LIMIT_INTERVAL CONFIG_LWIP_AUTOIP_RATE_LIMIT_INTERVAL
#endif /* CONFIG_LWIP_AUTOIP */
/*
----------------------------------
---------- SNMP options ----------
----------------------------------
*/
/*
----------------------------------
---------- IGMP options ----------
----------------------------------
*/
/**
* LWIP_IGMP==1: Turn on IGMP module.
*/
#define LWIP_IGMP 1
/*
----------------------------------
---------- DNS options -----------
----------------------------------
*/
/**
* LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
* transport.
*/
#define LWIP_DNS 1
/*
---------------------------------
---------- UDP options ----------
---------------------------------
*/
/*
---------------------------------
---------- TCP options ----------
---------------------------------
*/
/**
* TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
* Define to 0 if your device is low on memory.
*/
#define TCP_QUEUE_OOSEQ CONFIG_TCP_QUEUE_OOSEQ
/*
* LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
* events (accept, sent, etc) that happen in the system.
* LWIP_CALLBACK_API==1: The PCB callback function is called directly
* for the event. This is the default.
*/
#define TCP_MSS CONFIG_TCP_MSS
/**
* TCP_MSL: The maximum segment lifetime in milliseconds
*/
#define TCP_MSL CONFIG_TCP_MSL
/**
* TCP_MAXRTX: Maximum number of retransmissions of data segments.
*/
#define TCP_MAXRTX CONFIG_TCP_MAXRTX
/**
* TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
*/
#define TCP_SYNMAXRTX CONFIG_TCP_SYNMAXRTX
/**
* TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
*/
#define TCP_LISTEN_BACKLOG 1
/**
* TCP_OVERSIZE: The maximum number of bytes that tcp_write may
* allocate ahead of time
*/
#ifdef CONFIG_TCP_OVERSIZE_MSS
#define TCP_OVERSIZE TCP_MSS
#endif
#ifdef CONFIG_TCP_OVERSIZE_QUARTER_MSS
#define TCP_OVERSIZE (TCP_MSS/4)
#endif
#ifdef CONFIG_TCP_OVERSIZE_DISABLE
#define TCP_OVERSIZE 0
#endif
#ifndef TCP_OVERSIZE
#error "One of CONFIG_TCP_OVERSIZE_xxx options should be set by sdkconfig"
#endif
/*
----------------------------------
---------- Pbuf options ----------
----------------------------------
*/
/*
------------------------------------------------
---------- Network Interfaces options ----------
------------------------------------------------
*/
/**
* LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
* field.
*/
#define LWIP_NETIF_HOSTNAME 1
/**
* LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
* to be sent into one single pbuf. This is for compatibility with DMA-enabled
* MACs that do not support scatter-gather.
* Beware that this might involve CPU-memcpy before transmitting that would not
* be needed without this flag! Use this only if you need to!
*
* @todo: TCP and IP-frag do not work with this, yet:
*/
#define LWIP_NETIF_TX_SINGLE_PBUF 1
/*
------------------------------------
---------- LOOPIF options ----------
------------------------------------
*/
#ifdef CONFIG_LWIP_NETIF_LOOPBACK
/**
* LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
* address equal to the netif IP address, looping them back up the stack.
*/
#define LWIP_NETIF_LOOPBACK 1
/**
* LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
* sending for each netif (0 = disabled)
*/
#define LWIP_LOOPBACK_MAX_PBUFS CONFIG_LWIP_LOOPBACK_MAX_PBUFS
#endif
/*
------------------------------------
---------- SLIPIF options ----------
------------------------------------
*/
/*
------------------------------------
---------- Thread options ----------
------------------------------------
*/
/**
* TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
*/
#define TCPIP_THREAD_NAME "tiT"
/**
* TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
* The stack size value itself is platform-dependent, but is passed to
* sys_thread_new() when the thread is created.
*/
#define TCPIP_THREAD_STACKSIZE ESP_TASK_TCPIP_STACK
/**
* TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
* The priority value itself is platform-dependent, but is passed to
* sys_thread_new() when the thread is created.
*/
#define TCPIP_THREAD_PRIO ESP_TASK_TCPIP_PRIO
/**
* TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
* The queue size value itself is platform-dependent, but is passed to
* sys_mbox_new() when tcpip_init is called.
*/
#define TCPIP_MBOX_SIZE CONFIG_TCPIP_RECVMBOX_SIZE
/**
* DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
* NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
* to sys_mbox_new() when the recvmbox is created.
*/
#define DEFAULT_UDP_RECVMBOX_SIZE CONFIG_UDP_RECVMBOX_SIZE
/**
* DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
* NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
* to sys_mbox_new() when the recvmbox is created.
*/
#define DEFAULT_TCP_RECVMBOX_SIZE CONFIG_TCP_RECVMBOX_SIZE
/**
* DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
* The queue size value itself is platform-dependent, but is passed to
* sys_mbox_new() when the acceptmbox is created.
*/
#define DEFAULT_ACCEPTMBOX_SIZE 6
/**
* DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
* The stack size value itself is platform-dependent, but is passed to
* sys_thread_new() when the thread is created.
*/
#define DEFAULT_THREAD_STACKSIZE TCPIP_THREAD_STACKSIZE
/**
* DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
* The priority value itself is platform-dependent, but is passed to
* sys_thread_new() when the thread is created.
*/
#define DEFAULT_THREAD_PRIO TCPIP_THREAD_PRIO
/**
* DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
* NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
* to sys_mbox_new() when the recvmbox is created.
*/
#define DEFAULT_RAW_RECVMBOX_SIZE 6
/*
----------------------------------------------
---------- Sequential layer options ----------
----------------------------------------------
*/
/**
* LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
* Don't use it if you're not an active lwIP project member
*/
#define LWIP_TCPIP_CORE_LOCKING 0
/*
------------------------------------
---------- Socket options ----------
------------------------------------
*/
/**
* LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
* SO_SNDTIMEO processing.
*/
#define LWIP_SO_SNDTIMEO 1
/**
* LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
* SO_RCVTIMEO processing.
*/
#define LWIP_SO_RCVTIMEO 1
/**
* LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
* options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
* in seconds. (does not require sockets.c, and will affect tcp.c)
*/
#define LWIP_TCP_KEEPALIVE 1
/**
* LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
*/
#define LWIP_SO_RCVBUF CONFIG_LWIP_SO_RCVBUF
/**
* SO_REUSE==1: Enable SO_REUSEADDR option.
* This option is set via menuconfig.
*/
#define SO_REUSE CONFIG_LWIP_SO_REUSE
/**
* SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
* to all local matches if SO_REUSEADDR is turned on.
* WARNING: Adds a memcpy for every packet if passing to more than one pcb!
*/
#define SO_REUSE_RXTOALL CONFIG_LWIP_SO_REUSE_RXTOALL
/*
----------------------------------------
---------- Statistics options ----------
----------------------------------------
*/
/**
* LWIP_STATS==1: Enable statistics collection in lwip_stats.
*/
#define LWIP_STATS CONFIG_LWIP_STATS
#if LWIP_STATS
/**
* LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
*/
#define LWIP_STATS_DISPLAY CONFIG_LWIP_STATS
#endif
/*
---------------------------------
---------- PPP options ----------
---------------------------------
*/
/**
* PPP_SUPPORT==1: Enable PPP.
*/
#define PPP_SUPPORT CONFIG_PPP_SUPPORT
#if PPP_SUPPORT
/**
* PAP_SUPPORT==1: Support PAP.
*/
#define PAP_SUPPORT CONFIG_PPP_PAP_SUPPORT
/**
* CHAP_SUPPORT==1: Support CHAP.
*/
#define CHAP_SUPPORT CONFIG_PPP_CHAP_SUPPORT
/**
* MSCHAP_SUPPORT==1: Support MSCHAP.
*/
#define MSCHAP_SUPPORT CONFIG_PPP_MSCHAP_SUPPORT
/**
* CCP_SUPPORT==1: Support CCP.
*/
#define MPPE_SUPPORT CONFIG_PPP_MPPE_SUPPORT
/**
* PPP_MAXIDLEFLAG: Max Xmit idle time (in ms) before resend flag char.
* TODO: If PPP_MAXIDLEFLAG > 0 and next package is send during PPP_MAXIDLEFLAG time,
* then 0x7E is not added at the begining of PPP package but 0x7E termination
* is always at the end. This behaviour brokes PPP dial with GSM (PPPoS).
* The PPP package should always start and end with 0x7E.
*/
#define PPP_MAXIDLEFLAG 0
/**
* PPP_DEBUG: Enable debugging for PPP.
*/
#define PPP_DEBUG_ON CONFIG_PPP_DEBUG_ON
#if PPP_DEBUG_ON
#define PPP_DEBUG LWIP_DBG_ON
#else
#define PPP_DEBUG LWIP_DBG_OFF
#endif
#endif
/*
--------------------------------------
---------- Checksum options ----------
--------------------------------------
*/
/*
---------------------------------------
---------- IPv6 options ---------------
---------------------------------------
*/
/**
* LWIP_IPV6==1: Enable IPv6
*/
#define LWIP_IPV6 1
/*
---------------------------------------
---------- Hook options ---------------
---------------------------------------
*/
#define LWIP_HOOK_IP4_ROUTE_SRC ip4_route_src_hook
/*
---------------------------------------
---------- Debugging options ----------
---------------------------------------
*/
/**
* ETHARP_DEBUG: Enable debugging in etharp.c.
*/
#define ETHARP_DEBUG LWIP_DBG_OFF
/**
* NETIF_DEBUG: Enable debugging in netif.c.
*/
#define NETIF_DEBUG LWIP_DBG_OFF
/**
* PBUF_DEBUG: Enable debugging in pbuf.c.
*/
#define PBUF_DEBUG LWIP_DBG_OFF
/**
* API_LIB_DEBUG: Enable debugging in api_lib.c.
*/
#define API_LIB_DEBUG LWIP_DBG_OFF
/**
* SOCKETS_DEBUG: Enable debugging in sockets.c.
*/
#define SOCKETS_DEBUG LWIP_DBG_OFF
/**
* ICMP_DEBUG: Enable debugging in icmp.c.
*/
#define ICMP_DEBUG LWIP_DBG_OFF
/**
* IP_DEBUG: Enable debugging for IP.
*/
#define IP_DEBUG LWIP_DBG_OFF
/**
* MEMP_DEBUG: Enable debugging in memp.c.
*/
#define MEMP_DEBUG LWIP_DBG_OFF
/**
* TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
*/
#define TCP_INPUT_DEBUG LWIP_DBG_OFF
/**
* TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
*/
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
/**
* TCPIP_DEBUG: Enable debugging in tcpip.c.
*/
#define TCPIP_DEBUG LWIP_DBG_OFF
/**
* ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
* updated with the source MAC and IP addresses supplied in the packet.
* You may want to disable this if you do not trust LAN peers to have the
* correct addresses, or as a limited approach to attempt to handle
* spoofing. If disabled, lwIP will need to make a new ARP request if
* the peer is not already in the ARP table, adding a little latency.
* The peer *is* in the ARP table if it requested our address before.
* Also notice that this slows down input processing of every IP packet!
*/
#define ETHARP_TRUST_IP_MAC CONFIG_LWIP_ETHARP_TRUST_IP_MAC
/* Enable all Espressif-only options */
#define ESP_LWIP 1
#define ESP_LWIP_ARP 1
#define ESP_PER_SOC_TCP_WND 1
#define ESP_THREAD_SAFE 1
#define ESP_THREAD_SAFE_DEBUG LWIP_DBG_OFF
#define ESP_DHCP 1
#define ESP_DNS 1
#define ESP_IPV6_AUTOCONFIG 1
#define ESP_PERF 0
#define ESP_RANDOM_TCP_PORT 1
#define ESP_IP4_ATON 1
#define ESP_LIGHT_SLEEP 1
#define ESP_L2_TO_L3_COPY CONFIG_L2_TO_L3_COPY
#define ESP_STATS_MEM CONFIG_LWIP_STATS
#define ESP_STATS_DROP CONFIG_LWIP_STATS
#define ESP_STATS_TCP 0
#define ESP_DHCP_TIMER 1
#define ESP_LWIP_LOGI(...) ESP_LOGI("lwip", __VA_ARGS__)
#define TCP_WND_DEFAULT CONFIG_TCP_WND_DEFAULT
#define TCP_SND_BUF_DEFAULT CONFIG_TCP_SND_BUF_DEFAULT
#if ESP_PERF
#define DBG_PERF_PATH_SET(dir, point)
#define DBG_PERF_FILTER_LEN 1000
enum {
DBG_PERF_DIR_RX = 0,
DBG_PERF_DIR_TX,
};
enum {
DBG_PERF_POINT_INT = 0,
DBG_PERF_POINT_WIFI_IN = 1,
DBG_PERF_POINT_WIFI_OUT = 2,
DBG_PERF_POINT_LWIP_IN = 3,
DBG_PERF_POINT_LWIP_OUT = 4,
DBG_PERF_POINT_SOC_IN = 5,
DBG_PERF_POINT_SOC_OUT = 6,
};
#else
#define DBG_PERF_PATH_SET(dir, point)
#define DBG_PERF_FILTER_LEN 1000
#endif
#if ESP_PER_SOC_TCP_WND
#define TCP_WND(pcb) (pcb->per_soc_tcp_wnd)
#define TCP_SND_BUF(pcb) (pcb->per_soc_tcp_snd_buf)
#endif
/**
* DHCP_DEBUG: Enable debugging in dhcp.c.
*/
#define DHCP_DEBUG LWIP_DBG_OFF
#define LWIP_DEBUG LWIP_DBG_OFF
#define TCP_DEBUG LWIP_DBG_OFF
#define CHECKSUM_CHECK_UDP 0
#define CHECKSUM_CHECK_IP 0
#define LWIP_NETCONN_FULLDUPLEX 1
#define LWIP_NETCONN_SEM_PER_THREAD 1
#define LWIP_DHCP_MAX_NTP_SERVERS CONFIG_LWIP_DHCP_MAX_NTP_SERVERS
#define LWIP_TIMEVAL_PRIVATE 0
#define SNTP_SET_SYSTEM_TIME_US(sec, us) \
do { \
struct timeval tv = { .tv_sec = sec, .tv_usec = us }; \
settimeofday(&tv, NULL); \
} while (0);
#define SNTP_GET_SYSTEM_TIME(sec, us) \
do { \
struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; \
gettimeofday(&tv, NULL); \
(sec) = tv.tv_sec; \
(us) = tv.tv_usec; \
} while (0);
#define SOC_SEND_LOG //printf
#endif /* __LWIPOPTS_H__ */

22
tools/sdk/include/lwip/port/netinet/in.h
View File

@ -1,22 +0,0 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef IN_H_
#define IN_H_
#include "lwip/inet.h"
#define IN6_IS_ADDR_MULTICAST(a) IN_MULTICAST(a)
#endif /* IN_H_ */

33
tools/sdk/include/lwip/posix/netdb.h
View File

@ -1,33 +0,0 @@
/**
* @file
* This file is a posix wrapper for lwip/netdb.h.
*/
/*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
*/
#include "lwip/netdb.h"

33
tools/sdk/include/lwip/posix/sys/socket.h
View File

@ -1,33 +0,0 @@
/**
* @file
* This file is a posix wrapper for lwip/sockets.h.
*/
/*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
*/
#include "lwip/sockets.h"

4
tools/sdk/include/newlib/sys/types.h
View File

@ -221,6 +221,9 @@ typedef unsigned int mode_t _ST_INT32;
typedef unsigned short nlink_t;
/* FD_SET and friends are still LWIP only */
# if !defined(ESP_PLATFORM)
/* We don't define fd_set and friends if we are compiling POSIX
source, or if we have included (or may include as indicated
by __USE_W32_SOCKETS) the W32api winsock[2].h header which
@ -266,6 +269,7 @@ typedef struct _types_fd_set {
}))
# endif /* !(defined (_POSIX_SOURCE) || defined (_WINSOCK_H) || defined (_WINSOCKAPI_) || defined (__USE_W32_SOCKETS)) */
#endif /* !defined(ESP_PLATFORM) */
#undef __MS_types__
#undef _ST_INT32

27
tools/sdk/include/soc/soc/rtc.h
View File

@ -276,6 +276,25 @@ rtc_fast_freq_t rtc_clk_fast_freq_get();
*/
void rtc_clk_cpu_freq_set(rtc_cpu_freq_t cpu_freq);
/**
* @brief Switch CPU frequency
*
* This is a faster version of rtc_clk_cpu_freq_set, which can handle some of
* the frequency switch paths (XTAL -> PLL, PLL -> XTAL).
* When switching from PLL to XTAL, PLL is not disabled (unlike rtc_clk_cpu_freq_set).
* When switching back from XTAL to PLL, only the same PLL can be used.
* Therefore it is not possible to switch 240 -> XTAL -> (80 or 160) using this
* function.
*
* For unsupported cases, this function falls back to rtc_clk_cpu_freq_set.
*
* Unlike rtc_clk_cpu_freq_set, this function relies on static data, so it is
* less safe to use it e.g. from a panic handler (when memory might be corrupted).
*
* @param cpu_freq new CPU frequency
*/
void rtc_clk_cpu_freq_set_fast(rtc_cpu_freq_t cpu_freq);
/**
* @brief Get the currently selected CPU frequency
*
@ -296,6 +315,14 @@ rtc_cpu_freq_t rtc_clk_cpu_freq_get();
*/
uint32_t rtc_clk_cpu_freq_value(rtc_cpu_freq_t cpu_freq);
/**
* @brief Get rtc_cpu_freq_t enum value for given CPU frequency
* @param cpu_freq_mhz CPU frequency, one of 80, 160, 240, 2, and XTAL frequency
* @param[out] out_val output, rtc_cpu_freq_t value corresponding to the frequency
* @return true if the given frequency value matches one of enum values
*/
bool rtc_clk_cpu_freq_from_mhz(int cpu_freq_mhz, rtc_cpu_freq_t* out_val);
/**
* @brief Store new APB frequency value into RTC_APB_FREQ_REG
*

2
tools/sdk/include/soc/soc/sens_reg.h
View File

@ -297,6 +297,8 @@
#define SENS_SAR1_ATTEN_M ((SENS_SAR1_ATTEN_V)<<(SENS_SAR1_ATTEN_S))
#define SENS_SAR1_ATTEN_V 0xFFFFFFFF
#define SENS_SAR1_ATTEN_S 0
#define SENS_SAR1_ATTEN_VAL_MASK 0x3
#define SENS_SAR2_ATTEN_VAL_MASK 0x3
#define SENS_SAR_ATTEN2_REG (DR_REG_SENS_BASE + 0x0038)
/* SENS_SAR2_ATTEN : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */

8
tools/sdk/include/soc/soc/soc.h
View File

@ -266,6 +266,7 @@
#define CPU_CLK_FREQ_ROM APB_CLK_FREQ_ROM
#define CPU_CLK_FREQ APB_CLK_FREQ
#define APB_CLK_FREQ ( 80*1000000 ) //unit: Hz
#define REF_CLK_FREQ ( 1000000 )
#define UART_CLK_FREQ APB_CLK_FREQ
#define WDT_CLK_FREQ APB_CLK_FREQ
#define TIMER_CLK_FREQ (80000000>>4) //80MHz divided by 16
@ -296,11 +297,12 @@
#define SOC_DMA_HIGH 0x40000000
// Region of memory that is byte-accessible. See esp_ptr_byte_accessible().
#define SOC_BYTE_ACCESSIBLE_LOW 0x3FFAE000
#define SOC_BYTE_ACCESSIBLE_LOW 0x3FF90000
#define SOC_BYTE_ACCESSIBLE_HIGH 0x40000000
//Region of memory that is internal, as in on the same silicon die as the ESP32 CPUs (excluding RTC data region, that's checked separately.) See esp_ptr_internal().
#define SOC_MEM_INTERNAL_LOW 0x3F400000
//Region of memory that is internal, as in on the same silicon die as the ESP32 CPUs
//(excluding RTC data region, that's checked separately.) See esp_ptr_internal().
#define SOC_MEM_INTERNAL_LOW 0x3FF90000
#define SOC_MEM_INTERNAL_HIGH 0x400C2000

136
tools/sdk/include/soc/soc/syscon_struct.h
View File

@ -18,112 +18,106 @@
extern "C" {
#endif
typedef struct {
typedef volatile struct {
union {
struct {
volatile uint32_t pre_div: 10;
volatile uint32_t clk_320m_en: 1;
volatile uint32_t clk_en: 1;
volatile uint32_t rst_tick: 1;
volatile uint32_t quick_clk_chng: 1;
volatile uint32_t reserved14: 18;
uint32_t pre_div: 10;
uint32_t clk_320m_en: 1;
uint32_t clk_en: 1;
uint32_t rst_tick: 1;
uint32_t quick_clk_chng: 1;
uint32_t reserved14: 18;
};
volatile uint32_t val;
uint32_t val;
}clk_conf;
union {
struct {
volatile uint32_t xtal_tick: 8;
volatile uint32_t reserved8: 24;
uint32_t xtal_tick: 8;
uint32_t reserved8: 24;
};
volatile uint32_t val;
uint32_t val;
}xtal_tick_conf;
union {
struct {
volatile uint32_t pll_tick: 8;
volatile uint32_t reserved8: 24;
uint32_t pll_tick: 8;
uint32_t reserved8: 24;
};
volatile uint32_t val;
uint32_t val;
}pll_tick_conf;
union {
struct {
volatile uint32_t ck8m_tick: 8;
volatile uint32_t reserved8: 24;
uint32_t ck8m_tick: 8;
uint32_t reserved8: 24;
};
volatile uint32_t val;
uint32_t val;
}ck8m_tick_conf;
union {
struct {
volatile uint32_t start_force: 1;
volatile uint32_t start: 1;
volatile uint32_t sar2_mux: 1; /*1: SAR ADC2 is controlled by DIG ADC2 CTRL 0: SAR ADC2 is controlled by PWDET CTRL*/
volatile uint32_t work_mode: 2; /*0: single mode 1: double mode 2: alternate mode*/
volatile uint32_t sar_sel: 1; /*0: SAR1 1: SAR2 only work for single SAR mode*/
volatile uint32_t sar_clk_gated: 1;
volatile uint32_t sar_clk_div: 8; /*SAR clock divider*/
volatile uint32_t sar1_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
volatile uint32_t sar2_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
volatile uint32_t sar1_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC1 CTRL*/
volatile uint32_t sar2_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC2 CTRL*/
volatile uint32_t data_sar_sel: 1; /*1: sar_sel will be coded by the MSB of the 16-bit output data in this case the resolution should not be larger than 11 bits.*/
volatile uint32_t data_to_i2s: 1; /*1: I2S input data is from SAR ADC (for DMA) 0: I2S input data is from GPIO matrix*/
volatile uint32_t reserved27: 5;
uint32_t start_force: 1;
uint32_t start: 1;
uint32_t sar2_mux: 1; /*1: SAR ADC2 is controlled by DIG ADC2 CTRL 0: SAR ADC2 is controlled by PWDET CTRL*/
uint32_t work_mode: 2; /*0: single mode 1: double mode 2: alternate mode*/
uint32_t sar_sel: 1; /*0: SAR1 1: SAR2 only work for single SAR mode*/
uint32_t sar_clk_gated: 1;
uint32_t sar_clk_div: 8; /*SAR clock divider*/
uint32_t sar1_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
uint32_t sar2_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
uint32_t sar1_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC1 CTRL*/
uint32_t sar2_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC2 CTRL*/
uint32_t data_sar_sel: 1; /*1: sar_sel will be coded by the MSB of the 16-bit output data in this case the resolution should not be larger than 11 bits.*/
uint32_t data_to_i2s: 1; /*1: I2S input data is from SAR ADC (for DMA) 0: I2S input data is from GPIO matrix*/
uint32_t reserved27: 5;
};
volatile uint32_t val;
uint32_t val;
}saradc_ctrl;
union {
struct {
volatile uint32_t meas_num_limit: 1;
volatile uint32_t max_meas_num: 8; /*max conversion number*/
volatile uint32_t sar1_inv: 1; /*1: data to DIG ADC1 CTRL is inverted otherwise not*/
volatile uint32_t sar2_inv: 1; /*1: data to DIG ADC2 CTRL is inverted otherwise not*/
volatile uint32_t reserved11: 21;
uint32_t meas_num_limit: 1;
uint32_t max_meas_num: 8; /*max conversion number*/
uint32_t sar1_inv: 1; /*1: data to DIG ADC1 CTRL is inverted otherwise not*/
uint32_t sar2_inv: 1; /*1: data to DIG ADC2 CTRL is inverted otherwise not*/
uint32_t reserved11: 21;
};
volatile uint32_t val;
uint32_t val;
}saradc_ctrl2;
union {
struct {
volatile uint32_t rstb_wait: 8;
volatile uint32_t standby_wait: 8;
volatile uint32_t start_wait: 8;
volatile uint32_t sample_cycle: 8; /*sample cycles*/
uint32_t rstb_wait: 8;
uint32_t standby_wait: 8;
uint32_t start_wait: 8;
uint32_t sample_cycle: 8; /*sample cycles*/
};
volatile uint32_t val;
uint32_t val;
}saradc_fsm;
volatile uint32_t saradc_sar1_patt_tab1; /*item 0 ~ 3 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar1_patt_tab2; /*Item 4 ~ 7 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar1_patt_tab3; /*Item 8 ~ 11 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar1_patt_tab4; /*Item 12 ~ 15 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab1; /*item 0 ~ 3 for pattern table 2 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab2; /*Item 4 ~ 7 for pattern table 2 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab3; /*Item 8 ~ 11 for pattern table 2 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab4; /*Item 12 ~ 15 for pattern table 2 (each item one byte)*/
uint32_t saradc_sar1_patt_tab[4]; /*item 0 ~ 3 for ADC1 pattern table*/
uint32_t saradc_sar2_patt_tab[4]; /*item 0 ~ 3 for ADC2 pattern table*/
union {
struct {
volatile uint32_t apll_tick: 8;
volatile uint32_t reserved8: 24;
uint32_t apll_tick: 8;
uint32_t reserved8: 24;
};
volatile uint32_t val;
uint32_t val;
}apll_tick_conf;
volatile uint32_t reserved_40;
volatile uint32_t reserved_44;
volatile uint32_t reserved_48;
volatile uint32_t reserved_4c;
volatile uint32_t reserved_50;
volatile uint32_t reserved_54;
volatile uint32_t reserved_58;
volatile uint32_t reserved_5c;
volatile uint32_t reserved_60;
volatile uint32_t reserved_64;
volatile uint32_t reserved_68;
volatile uint32_t reserved_6c;
volatile uint32_t reserved_70;
volatile uint32_t reserved_74;
volatile uint32_t reserved_78;
volatile uint32_t date; /**/
uint32_t reserved_40;
uint32_t reserved_44;
uint32_t reserved_48;
uint32_t reserved_4c;
uint32_t reserved_50;
uint32_t reserved_54;
uint32_t reserved_58;
uint32_t reserved_5c;
uint32_t reserved_60;
uint32_t reserved_64;
uint32_t reserved_68;
uint32_t reserved_6c;
uint32_t reserved_70;
uint32_t reserved_74;
uint32_t reserved_78;
uint32_t date; /**/
} syscon_dev_t;
#ifdef __cplusplus
}
#endif
extern syscon_dev_t SYSCON;
#endif /* _SOC_SYSCON_STRUCT_H_ */

70
tools/sdk/include/tcpip_adapter/tcpip_adapter.h
View File

@ -113,6 +113,19 @@ typedef enum {
TCPIP_ADAPTER_IF_MAX
} tcpip_adapter_if_t;
/*type of DNS server*/
typedef enum {
TCPIP_ADAPTER_DNS_MAIN= 0, /**DNS main server address*/
TCPIP_ADAPTER_DNS_BACKUP, /**DNS backup server address,for STA only,support soft-AP in future*/
TCPIP_ADAPTER_DNS_FALLBACK, /**DNS fallback server address,for STA only*/
TCPIP_ADAPTER_DNS_MAX /**Max DNS */
} tcpip_adapter_dns_type_t;
/*info of DNS server*/
typedef struct {
ip_addr_t ip;
} tcpip_adapter_dns_info_t;
/* status of DHCP client or DHCP server */
typedef enum {
TCPIP_ADAPTER_DHCP_INIT = 0, /**< DHCP client/server in initial state */
@ -130,6 +143,7 @@ typedef enum{
} tcpip_adapter_option_mode_t;
typedef enum{
TCPIP_ADAPTER_DOMAIN_NAME_SERVER = 6, /**< domain name server */
TCPIP_ADAPTER_ROUTER_SOLICITATION_ADDRESS = 32, /**< solicitation router address */
TCPIP_ADAPTER_REQUESTED_IP_ADDRESS = 50, /**< request IP address pool */
TCPIP_ADAPTER_IP_ADDRESS_LEASE_TIME = 51, /**< request IP address lease time */
@ -145,14 +159,19 @@ typedef struct tcpip_adapter_api_msg_s {
tcpip_adapter_if_t tcpip_if;
tcpip_adapter_ip_info_t *ip_info;
uint8_t *mac;
const char *hostname;
void *data;
} tcpip_adapter_api_msg_t;
typedef struct tcpip_adapter_dns_param_s {
tcpip_adapter_dns_type_t dns_type;
tcpip_adapter_dns_info_t *dns_info;
} tcpip_adapter_dns_param_t;
#define TCPIP_ADAPTER_TRHEAD_SAFE 1
#define TCPIP_ADAPTER_IPC_LOCAL 0
#define TCPIP_ADAPTER_IPC_REMOTE 1
#define TCPIP_ADAPTER_IPC_CALL(_if, _mac, _ip, _hostname, _fn) do {\
#define TCPIP_ADAPTER_IPC_CALL(_if, _mac, _ip, _data, _fn) do {\
tcpip_adapter_api_msg_t msg;\
if (tcpip_inited == false) {\
ESP_LOGE(TAG, "tcpip_adapter is not initialized!");\
@ -160,9 +179,9 @@ typedef struct tcpip_adapter_api_msg_s {
}\
memset(&msg, 0, sizeof(msg));\
msg.tcpip_if = (_if);\
msg.mac = (_mac);\
msg.ip_info = (_ip);\
msg.hostname = (_hostname);\
msg.mac = (uint8_t*)(_mac);\
msg.ip_info = (tcpip_adapter_ip_info_t*)(_ip);\
msg.data = (void*)(_data);\
msg.api_fn = (_fn);\
if (TCPIP_ADAPTER_IPC_REMOTE == tcpip_adapter_ipc_check(&msg)) {\
ESP_LOGD(TAG, "check: remote, if=%d fn=%p\n", (_if), (_fn));\
@ -292,6 +311,47 @@ esp_err_t tcpip_adapter_get_ip_info(tcpip_adapter_if_t tcpip_if, tcpip_adapter_i
*/
esp_err_t tcpip_adapter_set_ip_info(tcpip_adapter_if_t tcpip_if, tcpip_adapter_ip_info_t *ip_info);
/**
* @brief Set DNS Server's information
*
* There has an DNS Server information copy in adapter library, set DNS Server for appointed interface and type.
*
* 1.In station mode, if dhcp client is enabled, then only the fallback DNS server can be set(TCPIP_ADAPTER_DNS_FALLBACK).
* Fallback DNS server is only used if no DNS servers are set via DHCP.
* If dhcp client is disabled, then need to set main/backup dns server(TCPIP_ADAPTER_DNS_MAIN, TCPIP_ADAPTER_DNS_BACKUP).
*
* 2.In soft-AP mode, the DNS Server's main dns server offered to the station is the IP address of soft-AP,
* if the application don't want to use the IP address of soft-AP, they can set the main dns server.
*
* This function is mainly used for setting static or Fallback DNS Server.
*
* @param[in] tcpip_if: the interface which we want to set DNS Server information
* @param[in] type: the type of DNS Server,including TCPIP_ADAPTER_DNS_MAIN, TCPIP_ADAPTER_DNS_BACKUP, TCPIP_ADAPTER_DNS_FALLBACK
* @param[in] dns: the DNS Server address to be set
*
* @return
* - ESP_OK on success
* - ESP_ERR_TCPIP_ADAPTER_INVALID_PARAMS invalid params
*/
esp_err_t tcpip_adapter_set_dns_info(tcpip_adapter_if_t tcpip_if, tcpip_adapter_dns_type_t type, tcpip_adapter_dns_info_t *dns);
/**
* @brief Get DNS Server's information
*
* When set the DNS Server information successfully, can get the DNS Server's information via the appointed tcpip_if and type
*
* This function is mainly used for getting DNS Server information.
*
* @param[in] tcpip_if: the interface which we want to get DNS Server information
* @param[in] type: the type of DNS Server,including TCPIP_ADAPTER_DNS_MAIN, TCPIP_ADAPTER_DNS_BACKUP, TCPIP_ADAPTER_DNS_FALLBACK
* @param[in] dns: the DNS Server address to be get
*
* @return
* - ESP_OK on success
* - ESP_ERR_TCPIP_ADAPTER_INVALID_PARAMS invalid params
*/
esp_err_t tcpip_adapter_get_dns_info(tcpip_adapter_if_t tcpip_if, tcpip_adapter_dns_type_t type, tcpip_adapter_dns_info_t *dns);
/**
* @brief Get interface's old IP information
*

49
tools/sdk/include/vfs/esp_vfs.h
View File

@ -43,16 +43,30 @@ extern "C" {
*/
#define ESP_VFS_FLAG_CONTEXT_PTR 1
/**
* Flag which indicates that the FD space of the VFS implementation should be made
* the same as the FD space in newlib. This means that the normal masking off
* of VFS-independent fd bits is ignored and the full user-facing fd is passed to
* the VFS implementation.
*
* Set the p_minimum_fd & p_maximum_fd pointers when registering the socket in
* order to know what range of FDs can be used with the registered VFS.
*
* This is mostly useful for LWIP which shares the socket FD space with
* socket-specific functions.
*
*/
#define ESP_VFS_FLAG_SHARED_FD_SPACE 2
/**
* @brief VFS definition structure
*
* This structure should be filled with pointers to corresponding
* FS driver functions.
*
* If the FS implementation has an option to use certain offset for
* all file descriptors, this value should be passed into fd_offset
* field. Otherwise VFS component will translate all FDs to start
* at zero offset.
* VFS component will translate all FDs so that the filesystem implementation
* sees them starting at zero. The caller sees a global FD which is prefixed
* with an pre-filesystem-implementation.
*
* Some FS implementations expect some state (e.g. pointer to some structure)
* to be passed in as a first argument. For these implementations,
@ -67,8 +81,7 @@ extern "C" {
*/
typedef struct
{
int fd_offset; /*!< file descriptor offset, determined by the FS driver */
int flags; /*!< ESP_VFS_FLAG_CONTEXT_PTR or ESP_VFS_FLAG_DEFAULT */
int flags; /*!< ESP_VFS_FLAG_CONTEXT_PTR or ESP_VFS_FLAG_DEFAULT, plus optionally ESP_VFS_FLAG_SHARED_FD_SPACE */
union {
ssize_t (*write_p)(void* p, int fd, const void * data, size_t size);
ssize_t (*write)(int fd, const void * data, size_t size);
@ -145,6 +158,14 @@ typedef struct
int (*fcntl_p)(void* ctx, int fd, int cmd, va_list args);
int (*fcntl)(int fd, int cmd, va_list args);
};
union {
int (*ioctl_p)(void* ctx, int fd, int cmd, va_list args);
int (*ioctl)(int fd, int cmd, va_list args);
};
union {
int (*fsync_p)(void* ctx, int fd);
int (*fsync)(int fd);
};
} esp_vfs_t;
@ -170,6 +191,22 @@ typedef struct
esp_err_t esp_vfs_register(const char* base_path, const esp_vfs_t* vfs, void* ctx);
/**
* Special case function for registering a VFS that uses a method other than
* open() to open new file descriptors.
*
* This is a special-purpose function intended for registering LWIP sockets to VFS.
*
* @param vfs Pointer to esp_vfs_t. Meaning is the same as for esp_vfs_register().
* @param ctx Pointer to context structure. Meaning is the same as for esp_vfs_register().
* @param p_min_fd If non-NULL, on success this variable is written with the minimum (global/user-facing) FD that this VFS will use. This is useful when ESP_VFS_FLAG_SHARED_FD_SPACE is set in vfs->flags.
* @param p_max_fd If non-NULL, on success this variable is written with one higher than the maximum (global/user-facing) FD that this VFS will use. This is useful when ESP_VFS_FLAG_SHARED_FD_SPACE is set in vfs->flags.
*
* @return ESP_OK if successful, ESP_ERR_NO_MEM if too many VFSes are
* registered.
*/
esp_err_t esp_vfs_register_socket_space(const esp_vfs_t *vfs, void *ctx, int *p_min_fd, int *p_max_fd);
/**
* Unregister a virtual filesystem for given path prefix
*

11
tools/sdk/include/vfs/esp_vfs_dev.h
View File

@ -12,11 +12,14 @@
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_VFS_DEV_H__
#define __ESP_VFS_DEV_H__
#pragma once
#include "esp_vfs.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Line ending settings
*/
@ -81,4 +84,6 @@ void esp_vfs_dev_uart_use_nonblocking(int uart_num);
*/
void esp_vfs_dev_uart_use_driver(int uart_num);
#endif //__ESP_VFS_DEV_H__
#ifdef __cplusplus
}
#endif

1
tools/sdk/ld/esp32.common.ld
View File

@ -117,6 +117,7 @@ SECTIONS
*(.dram1 .dram1.*)
*libesp32.a:panic.o(.rodata .rodata.*)
*libphy.a:(.rodata .rodata.*)
*libsoc.a:rtc_clk.o(.rodata .rodata.*)
*libapp_trace.a:(.rodata .rodata.*)
*libgcov.a:(.rodata .rodata.*)
*libheap.a:multi_heap.o(.rodata .rodata.*)

3
tools/sdk/ld/esp32.peripherals.ld
View File

@ -20,8 +20,9 @@ PROVIDE ( TIMERG0 = 0x3ff5F000 );
PROVIDE ( TIMERG1 = 0x3ff60000 );
PROVIDE ( SPI2 = 0x3ff64000 );
PROVIDE ( SPI3 = 0x3ff65000 );
PROVIDE ( SYSCON = 0x3ff66000 );
PROVIDE ( I2C1 = 0x3ff67000 );
PROVIDE ( SDMMC = 0x3ff68000 );
PROVIDE ( MCPWM1 = 0x3ff6C000 );
PROVIDE ( I2S1 = 0x3ff6D000 );
PROVIDE ( UART2 = 0x3ff6E000 );
PROVIDE ( SDMMC = 0x3ff68000 );

BIN
tools/sdk/lib/libapp_trace.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libapp_update.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libbootloader_support.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libbt.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libc.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libc_nano.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libcoap.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libcoexist.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libconsole.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libcore.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libcxx.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libdriver.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libesp32.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libesp_adc_cal.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libespnow.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libethernet.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libexpat.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libfatfs.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libfreertos.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libheap.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libjsmn.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libjson.a
View File

Binary file not shown.

BIN
tools/sdk/lib/liblog.a
View File

Binary file not shown.

BIN
tools/sdk/lib/liblwip.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libmbedtls.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libmdns.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libmicro-ecc.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libnet80211.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libnewlib.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libnghttp.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libnvs_flash.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libopenssl.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libphy.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libpp.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libpthread.a
View File

Binary file not shown.

BIN
tools/sdk/lib/librtc.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libsdmmc.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libsoc.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libspi_flash.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libspiffs.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libtcpip_adapter.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libulp.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libvfs.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libwear_levelling.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libwpa.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libwpa2.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libwpa_supplicant.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libwps.a
View File

Binary file not shown.

BIN
tools/sdk/lib/libxtensa-debug-module.a
View File

Binary file not shown.

10
tools/sdk/sdkconfig
View File

@ -91,6 +91,7 @@ CONFIG_OPTIMIZATION_LEVEL_RELEASE=
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
CONFIG_OPTIMIZATION_ASSERTIONS_SILENT=
CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED=
CONFIG_CXX_EXCEPTIONS=
#
# Component config
@ -165,7 +166,7 @@ CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2048
CONFIG_MAIN_TASK_STACK_SIZE=8192
CONFIG_MAIN_TASK_STACK_SIZE=4096
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=4096
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
@ -242,6 +243,11 @@ CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION=
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
#
# Power Management
#
CONFIG_PM_ENABLE=
#
# Ethernet
#
@ -306,6 +312,7 @@ CONFIG_SUPPORT_STATIC_ALLOCATION=
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_USE_TRACE_FACILITY=
CONFIG_FREERTOS_DEBUG_INTERNALS=
#
@ -338,7 +345,6 @@ CONFIG_LOG_COLORS=
#
CONFIG_L2_TO_L3_COPY=
CONFIG_LWIP_MAX_SOCKETS=10
CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX=0
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=y