Move Example to proper folder

libraries/ESP32/examples/FreeRTOS/FreeRTOS.ino

@@ -1,97 +1,97 @@
-#if CONFIG_FREERTOS_UNICORE
+#if CONFIG_FREERTOS_UNICORE
-#define ARDUINO_RUNNING_CORE 0
+#define ARDUINO_RUNNING_CORE 0
-#else
+#else
-#define ARDUINO_RUNNING_CORE 1
+#define ARDUINO_RUNNING_CORE 1
-#endif
+#endif
-
+
-#ifndef LED_BUILTIN
+#ifndef LED_BUILTIN
-#define LED_BUILTIN 13
+#define LED_BUILTIN 13
-#endif
+#endif
-
+
-// define two tasks for Blink & AnalogRead
+// define two tasks for Blink & AnalogRead
-void TaskBlink( void *pvParameters );
+void TaskBlink( void *pvParameters );
-void TaskAnalogReadA3( void *pvParameters );
+void TaskAnalogReadA3( void *pvParameters );
-
+
-// the setup function runs once when you press reset or power the board
+// the setup function runs once when you press reset or power the board
-void setup() {
+void setup() {
-  
+  
-  // initialize serial communication at 115200 bits per second:
+  // initialize serial communication at 115200 bits per second:
-  Serial.begin(115200);
+  Serial.begin(115200);
-  
+  
-  // Now set up two tasks to run independently.
+  // Now set up two tasks to run independently.
-  xTaskCreatePinnedToCore(
+  xTaskCreatePinnedToCore(
-    TaskBlink
+    TaskBlink
-    ,  "TaskBlink"   // A name just for humans
+    ,  "TaskBlink"   // A name just for humans
-    ,  1024  // This stack size can be checked & adjusted by reading the Stack Highwater
+    ,  1024  // This stack size can be checked & adjusted by reading the Stack Highwater
-    ,  NULL
+    ,  NULL
-    ,  2  // Priority, with 3 (configMAX_PRIORITIES - 1) being the highest, and 0 being the lowest.
+    ,  2  // Priority, with 3 (configMAX_PRIORITIES - 1) being the highest, and 0 being the lowest.
-    ,  NULL 
+    ,  NULL 
-    ,  ARDUINO_RUNNING_CORE);
+    ,  ARDUINO_RUNNING_CORE);
-
+
-  xTaskCreatePinnedToCore(
+  xTaskCreatePinnedToCore(
-    TaskAnalogReadA3
+    TaskAnalogReadA3
-    ,  "AnalogReadA3"
+    ,  "AnalogReadA3"
-    ,  1024  // Stack size
+    ,  1024  // Stack size
-    ,  NULL
+    ,  NULL
-    ,  1  // Priority
+    ,  1  // Priority
-    ,  NULL 
+    ,  NULL 
-    ,  ARDUINO_RUNNING_CORE);
+    ,  ARDUINO_RUNNING_CORE);
-
+
-  // Now the task scheduler, which takes over control of scheduling individual tasks, is automatically started.
+  // Now the task scheduler, which takes over control of scheduling individual tasks, is automatically started.
-}
+}
-
+
-void loop()
+void loop()
-{
+{
-  // Empty. Things are done in Tasks.
+  // Empty. Things are done in Tasks.
-}
+}
-
+
-/*--------------------------------------------------*/
+/*--------------------------------------------------*/
-/*---------------------- Tasks ---------------------*/
+/*---------------------- Tasks ---------------------*/
-/*--------------------------------------------------*/
+/*--------------------------------------------------*/
-
+
-void TaskBlink(void *pvParameters)  // This is a task.
+void TaskBlink(void *pvParameters)  // This is a task.
-{
+{
-  (void) pvParameters;
+  (void) pvParameters;
-
+
-/*
+/*
-  Blink
+  Blink
-  Turns on an LED on for one second, then off for one second, repeatedly.
+  Turns on an LED on for one second, then off for one second, repeatedly.
-    
+    
-  If you want to know what pin the on-board LED is connected to on your ESP32 model, check
+  If you want to know what pin the on-board LED is connected to on your ESP32 model, check
-  the Technical Specs of your board.
+  the Technical Specs of your board.
-*/
+*/
-
+
-  // initialize digital LED_BUILTIN on pin 13 as an output.
+  // initialize digital LED_BUILTIN on pin 13 as an output.
-  pinMode(LED_BUILTIN, OUTPUT);
+  pinMode(LED_BUILTIN, OUTPUT);
-
+
-  for (;;) // A Task shall never return or exit.
+  for (;;) // A Task shall never return or exit.
-  {
+  {
-    digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
+    digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
-    vTaskDelay(100);  // one tick delay (15ms) in between reads for stability
+    vTaskDelay(100);  // one tick delay (15ms) in between reads for stability
-    digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
+    digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
-    vTaskDelay(100);  // one tick delay (15ms) in between reads for stability
+    vTaskDelay(100);  // one tick delay (15ms) in between reads for stability
-  }
+  }
-}
+}
-
+
-void TaskAnalogReadA3(void *pvParameters)  // This is a task.
+void TaskAnalogReadA3(void *pvParameters)  // This is a task.
-{
+{
-  (void) pvParameters;
+  (void) pvParameters;
-  
+  
-/*
+/*
-  AnalogReadSerial
+  AnalogReadSerial
-  Reads an analog input on pin A3, prints the result to the serial monitor.
+  Reads an analog input on pin A3, prints the result to the serial monitor.
-  Graphical representation is available using serial plotter (Tools > Serial Plotter menu)
+  Graphical representation is available using serial plotter (Tools > Serial Plotter menu)
-  Attach the center pin of a potentiometer to pin A3, and the outside pins to +5V and ground.
+  Attach the center pin of a potentiometer to pin A3, and the outside pins to +5V and ground.
-
+
-  This example code is in the public domain.
+  This example code is in the public domain.
-*/
+*/
-
+
-  for (;;)
+  for (;;)
-  {
+  {
-    // read the input on analog pin A3:
+    // read the input on analog pin A3:
-    int sensorValueA3 = analogRead(A3);
+    int sensorValueA3 = analogRead(A3);
-    // print out the value you read:
+    // print out the value you read:
-    Serial.println(sensorValueA3);
+    Serial.println(sensorValueA3);
-    vTaskDelay(10);  // one tick delay (15ms) in between reads for stability
+    vTaskDelay(10);  // one tick delay (15ms) in between reads for stability
-  }
+  }
-}
+}