Commit Graph

928 Commits

Author SHA1 Message Date
lbernstone
17065dfd3a Added a define to format the spiffs in SPIFFS_Test.ino (#1662)
* Added a define to format the spiffs in SPIFFS_Test.ino

* Uncommented the define

* Matched define names
2018-07-25 18:44:37 +02:00
MaValki
2f5b3c0c56 Functions _uploadReadByte and _parseForm were modified in order to (#1677)
speed up uploading data. Now there is no need to call time consuming
client.connected() method.
2018-07-25 17:37:15 +02:00
Marcin Gałczyński
1fe3ee87b6 Feature/selective compilation (#1671)
* Selective compilation

* Optimized component.mk

* Autoconnect WiFi now forces WiFi
2018-07-25 13:02:37 +02:00
Jan P. Schümann
328523f5e3 Memory leak (#1672)
When a package of size 0 arrives, "buf" is created, but never released. (Sorry, that was my mistake in the last patch)
2018-07-25 12:56:41 +02:00
Bin
7761ebd9f2 Add M5Stack-FIRE board (#1647)
* Add M5Stack-FIRE board

* updated m5stack-fire boards.txt

* remove pins 16 and 17
2018-07-25 12:56:04 +02:00
me-no-dev
f9a382ab9f fix some compilation error and warnings in i2c 2018-07-24 22:06:50 +02:00
Martin
d854dc1bf6 Create WiFiClientEnterprise.ino (#1640)
Sketch for ESP32 boards that allow them to connect to WPA/WPA2 Enterprise Networks.
2018-07-24 19:57:57 +02:00
Schuemi
f1f8d7e306 Packet with zero data length (#1659)
If you receive a package with a data length of zero, parsePacket returns 0, but rx_buffer will exist. So if another parsePacket with no read access returns to zeros, there is still data that can be read. This example would not work: https://www.arduino.cc/en/Reference/EthernetUDPParsePacket

Also I added a check if rx_buffer exit when you try to flush it.
2018-07-24 19:52:42 +02:00
Ron M. Battle
da798c7db0 Add TTGO LoRa32 with OLED Version 1.x Board (#1663)
* Add ttgo-lora32-v1 folder to variants folder

* Add ttgo-lora32-v1 info to boards.txt

* Add defs to pins_arduino.h for I2C OLED and SPI LoRa radio pinouts as per @stickbreaker
2018-07-24 19:49:38 +02:00
chuck todd
8d7fb58672 Fix for spurious interrupts during I2C communications (#1665)
This version no longer needs an interrupt for each byte transferred. It only needs interrupts for START, STOP, FIFO empty/Full or error conditions.  This dramatically reduces the interrupt overhead.  I think the prior version was causing an interrupt overload condition where the ISR was not able to process every interrupt as they happened.
2018-07-24 19:43:45 +02:00
Sathishkumar T
2fda054bea [OTA Timeout] Added ability set OTA timeout in the OTA client (#1669) 2018-07-24 19:40:18 +02:00
Luc
e157ec06a7 expose post args during upload (#1650) 2018-07-17 10:58:03 +02:00
me-no-dev
05d72f963d fix WiFi STA going into loop in some cases of disconnect 2018-07-16 22:50:52 +02:00
pacucha42
b14f82b65f Release notes formatting update (#1634) 2018-07-16 20:47:30 +02:00
per1234
c830511f01 EEPROM library: Move #include of Arduino.h to header file (#1641)
EEPROM.h uses data types which are declared through Arduino.h but that file does not contain an #include directive for Arduino.h. This does not cause any problems when the EEPROM library is #included from a .ino file because the Arduino IDE automatically adds an #include directive for Arduino.h but this is not the case for .cpp files. If a .cpp file has an #include directive for EEPROM.h that does not follow an #include directive for Arduino.h then compilation fails:

E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:91:5: error: 'float_t' does not name a type

     float_t readFloat(int address);

     ^

E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:92:5: error: 'double_t' does not name a type

     double_t readDouble(int address);

     ^

E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:95:5: error: 'String' does not name a type

     String readString(int address);

     ^

E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:110:36: error: 'float_t' has not been declared

     size_t writeFloat(int address, float_t value);

                                    ^

E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:111:37: error: 'double_t' has not been declared

     size_t writeDouble(int address, double_t value);

                                     ^

E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:114:37: error: 'String' has not been declared

     size_t writeString(int address, String value);
2018-07-16 20:44:36 +02:00
Kryštof Černý
cbd4dc53a6 Add ALKS board variant (#1643)
* Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
me-no-dev
44f5a4dbc8 Fix Client returning disconnected because of VFS errors 2018-07-16 20:08:27 +02:00
me-no-dev
e63aa40650 Enable PSRAM builds when used as IDF component 2018-07-15 10:20:01 +02:00
chuck todd
28a410dd50 Spurious Interrupts Temporary fix 20180711 (#1625)
the 'eject' ERROR is and indication of an interrupt triggering without an source.  I am working to eliminate these serviceable interrupt.  This update increase stability on a HelTek Wifi Lora 32 board. with a SSD1306 OLED.  This update fixes a glaring error in the interrupt allocation code, the Interrupt mask was wrong.  I also dynamically adjust the FiFo thresholds based on Bus clockrate. The change to FiFo thresholds has reduced the number for 'eject' events.  I also change 'eject' from and ERROR to DEBUG.  An 'eject' event does not compromise i2c transmissions. It happens after a transaction has completed. 

Chuck.
2018-07-12 15:18:26 +02:00
me-no-dev
ddfeae90d0 Fix AsyncUDP server exception 2018-07-11 20:46:54 +02:00
me-no-dev
ff90778173 Fix HTTP client returning disconnected when there is still data avalable 2018-07-10 21:06:20 +02:00
me-no-dev
4e9d1ee237 Fix connected to be wrongly reported in WiFiClient 2018-07-10 21:05:44 +02:00
me-no-dev
c1a94b5326 Fix wrong event description 2018-07-10 16:13:34 +02:00
me-no-dev
3e160587f3 Fix WiFi Client not properly reporting connected state 2018-07-10 15:01:40 +02:00
brendanvanbreda
79010b6498 Add XinaBox CW02 to supported boards (#1620)
* Create pins_arduino.h

* Update boards.txt

* Update pins_arduino.h
2018-07-10 13:43:21 +02:00
pacucha42
9925772db0 * update 'version' in platform.txt (#1619) 2018-07-10 11:26:19 +02:00
Bert Melis
c77aed4ac4 Allow using argument with attachInterrupt (#1535)
* Allow using argument with attachInterrupt

* formatting

replace tabs with spaces

* fix bug more then 1 interrupt

* leftover

* add example

* make attachInterruptArg public

* update example

* leftover
2018-07-07 11:26:58 +02:00
Gottfried Haider
901a341949 BluetoothSerial: set COD to be compatible with macOS (#1304) (#1556) 2018-07-07 11:25:10 +02:00
lbernstone
9f6d0d2958 EEPROM.readstring was returning an extra character (#1609) 2018-07-07 10:19:44 +02:00
me-no-dev
9efecc1be0 Implement RX buffer for WiFi client to speed up small reads 2018-07-05 22:31:58 +02:00
me-no-dev
b0c6991bcf Small adjustments to the web server 2018-07-05 22:31:19 +02:00
me-no-dev
8afdd71b3a Add missing event string to WiFi events 2018-07-05 22:30:54 +02:00
me-no-dev
871dd183d8 Print to debug the IP address obtained by DHCP 2018-07-05 16:04:07 +02:00
me-no-dev
05111bbde7 fix case where library source subfolders are not compiled when used as component 2018-07-05 14:27:17 +02:00
me-no-dev
bad53905e8 Prevent exceptions in WiFi if not yet started 2018-07-05 12:28:15 +02:00
me-no-dev
95b87545e7 Make Stream functions if File to not wait for timeout
Fixes: https://github.com/espressif/arduino-esp32/issues/1597
2018-07-05 11:51:58 +02:00
pacucha42
9f8f05735b * relnotes handling update (#1592)
* script exec fails on curl error
2018-07-04 15:46:46 +02:00
me-no-dev
a835bb26c4 Add missing flag to fix psram issues
Thanks @igrr
2018-07-04 12:11:25 +02:00
me-no-dev
5e46c9bae6 Add Wrover Support and Option to enable SPIRAM 2018-07-03 23:03:50 +02:00
me-no-dev
659c8ad528 Fix TelnetToSerial sketch 2018-07-03 21:51:24 +02:00
me-no-dev
2fe965259a "fix" SPI 2018-07-03 21:23:04 +02:00
Karan Sharma
0161e28614 Added OTAWebUpdater Doc (#1583) 2018-07-03 20:43:18 +02:00
me-no-dev
4e5cbdaa7f Add declarations for all Serial, SPI and Wire buses 2018-07-03 20:41:03 +02:00
chemicstry
12ca9e8b52 Port UART reset fix from ESP-IDF (#1408) 2018-07-03 17:54:08 +02:00
me-no-dev
8b01b9e187 Change esptool version notation 2018-07-03 14:50:14 +02:00
lbernstone
c4c946a83d Broke HTTP_Method out into a separate library for reuse in ESPAsyncWebServer (#1562) 2018-07-02 18:24:08 +02:00
korstiaanS
3967beb4fb Added WiPy 3.0 board (#1572) 2018-07-02 18:23:06 +02:00
chuck todd
6411ac4e3c Remove confusing Debug output. (#1574)
If Core Debug Level is at DEBUG, a confusing debug message will be emitted if the I2C transaction takes longer complete than the  calculated minimum time.  This original debug message was just to prove that this new i2c code could correctly handle SCL stretching or interrupt latency issues. This delay is not a problem, or an error.  Usually it is caused by a higher priory interrupt starving the i2c ISR.  Usually WiFi is the culprit.  As long of this delay is within the configured timeout (by default 50ms, or can be set with Wire.setTimeOut(milliseconds);) no problem will occur and the transaction will successfully complete.
Chuck.
2018-07-02 18:22:05 +02:00
Me No Dev
184bb069f2
Fix io16 io17 and PSRAM support (#1564)
* Add PSRAM init and malloc funtions

* Rebuild IDF libs
2018-06-30 23:06:50 +02:00
pacucha42
b855eb23a7 * arduino-esp32 release mgmt. update (#1557) 2018-06-29 00:54:26 +02:00