Commit Graph

585 Commits

Author SHA1 Message Date
me-no-dev
5de03a3918 Fix WiFi STA config IP to INADDR_NONE results in 255.255.255.255
Fixes: https://github.com/espressif/arduino-esp32/issues/4732
2021-02-03 11:47:35 +02:00
Emanuel Posescu
c9b3e512dd
Make BLERemoteCharacteristic::getRemoteService() public #3367 (#4735) 2021-01-21 14:30:33 +02:00
bot1131357
8d0e68db4f
Added parameter to Preferences::begin to select non-default NVS partition (#4718) 2021-01-15 19:06:51 +02:00
Keegan Morrow
5f98370707
Add IP101 support (#4620) 2021-01-11 12:00:35 +02:00
richardclli
81b9130d8d
BluetoothSerial SSP Authentication with callbacks (#4634)
Added authentication callbacks and example, resolves #4622.
2021-01-11 11:58:15 +02:00
Andrew
434d02c49f
BLERemoteCharacteristic::registerForNotify: Permit event registration without updating descriptor. (#4659) 2021-01-11 11:44:38 +02:00
Verkehrsrot
fe093a5e35
Sanitize compiler warning in BLERemoteService.cpp (issue #4660) (#4669)
Compiler complains on unused parameter pCharacteristicMap:

framework-arduinoespressif32\libraries\BLE\src\BLERemoteService.cpp: In member function 'void BLERemoteService::getCharacteristics(std::map<short unsigned int, BLERemoteCharacteristic*>*)':
\framework-arduinoespressif32\libraries\BLE\src\BLERemoteService.cpp:246:89: warning: parameter 'pCharacteristicMap' set but not used [-Wunused-but-set-parameter]
 void BLERemoteService::getCharacteristics(std::map<uint16_t, BLERemoteCharacteristic*>* pCharacteristicMap) {
2021-01-11 11:42:32 +02:00
Me No Dev
ef99cd7fe7
Add WiFiClientSecure::setInsecure() to equalize API with ESP8266 (#4648) 2020-12-21 01:09:37 +02:00
Clemens Kirchgatterer
3236358ded
Update WiFiClient.cpp (#4573)
Replace (depricated) bzero, bcopy with memset and memcpy.
2020-12-01 16:35:12 +02:00
Clemens Kirchgatterer
82e71f9b50
Update ssl_client.cpp (#4574)
Replace (depricated) bzero with memset.
2020-12-01 16:34:36 +02:00
Marc J
6b0114366b
Fix logic in SPIClass::setHwCs. (#4559)
Fixes #4558
2020-11-23 14:22:43 +02:00
Mike Dunston
97dcea2b99
Update library.properties (#4563)
Set the category to silence this warning in the Arduino IDE:
```
WARNING: Category '' in library WiFiProv is not valid. Setting to 'Uncategorized'
```
2020-11-23 14:21:34 +02:00
Sweety
dcff2e9774
Separate Provisioning library from WiFi library (#4547) 2020-11-19 00:12:16 +02:00
lbernstone
d8b1fc81c0
Added usedBytes to match other filesystems (#4534) 2020-11-15 08:48:21 +02:00
Me No Dev
378b6ac032
Fix issue in webserver with Chrome based browsers
https://github.com/espressif/arduino-esp32/issues/3652
2020-11-15 08:46:23 +02:00
Clemens Kirchgatterer
b6cc108d49
Update WiFiProv.cpp (#4519)
Do not pollute the global namespace with generic names like 'config' by declaring global variables 'static'.
2020-11-10 20:51:10 +02:00
Robby Decosemaeker
3274602eb0
Notify the batteryLevel change (#4517) 2020-11-10 13:02:00 +02:00
Me No Dev
486a4c66c4
SDCARD: First sector always written twice if multiple sectors are updated 2020-11-06 22:20:20 +02:00
ahorn42
c6a8da61f7
Allow faster reuse of socket, to be able to restart WifiServer. (#4306)
See #3960 for more details of the problem and the solution. I only implemented what was proposed in this ticket, as it solves my problem, which was the same as in this ticket. Credits for the code going to @etrinh ;-)

This also is a more consistence behaviour compared to esp8266, where it also is possible to restart the wifiserver immediately on the same port.
2020-11-06 14:16:50 +02:00
Frank
3968821834
HttpClient uses Serial.printf() (#4488)
changed to log_d()
2020-11-04 14:49:33 +02:00
Frank
90f869e772
Fix BUG: Parsing of first line fails (#4484)
..because a firstLine = false; is missing ;)
2020-11-04 02:24:01 +02:00
Me No Dev
22b427df0f
IDF release/v3.3 (#3672)
ESP-IDF release/v3.3: 66d3783c8
esp-face: 420fc7e
esp32-camera: 0107093
2020-11-03 21:20:00 +02:00
lbernstone
e2452c0dfc
Added isKey method to Preferences (#4441)
Checks to see if a string is a key in the namespace. 

Fixes #4440
2020-11-03 17:03:04 +02:00
Mark D
56a7ae8712
Trailing spaces (#3738)
* fix typo in WiFiMulti

* clean up trailing spaces

* clean up script file used in cleaning

Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
2020-11-02 22:11:26 +02:00
Denys Fedoryshchenko
e4b008e712
Handle stream timeouts properly, for slow HTTP/HTTPS links (#3752)
This patch fixes update timeouts (error #6) on slow HTTP/HTTPS links.
2020-11-02 22:01:27 +02:00
saknarak
dccb4e8608
improve & fix BLEScan when wantDuplicates (#3995)
* improve & fix BLEScan when too many BLE devices
- when wantDuplicates, no need to check duplicate and no more insert into vector
- delete advertisedDevice when not insert into vector, fix memory leak
- add showParse when you just want raw advertised data
2020-11-02 20:41:50 +02:00
Ivorius
0e341a6192
Add sdkconfig option CONFIG_ARDUINO_UDP_TASK_PRIORITY, which sets the task priority for the UDP vtask." (#4131) 2020-11-02 20:21:59 +02:00
buxtronix
76cd2e2375
Fix BLE connection handling (#4137)
Remove device from Peer list if connection fails.

Only call onConnect callback if connection was successful.

Only call onDisconnect callback if the connection was previously connected (ESP_GATTC_DISCONNECT_EVT is fired on a unsuccessful connection attempt also).

Resolves a number of issues with phantom events and callbacks being fired.
2020-11-02 20:20:40 +02:00
buxtronix
9f7ff009c6
Fix parameter to BLEDevice::updatePeerDevice (#4133)
::addPeerDevice and ::removePeerDevice are called with m_appId, so should ::updatePeerDevice as all use the same parameter for the underlying map's key.
2020-11-02 20:20:16 +02:00
Me No Dev
704b71dabe
Fix header parsing
fixes #4454

closes #4455
2020-11-02 20:10:22 +02:00
Ernst Sikora
7c0572172c
Fix for issue #4158: BLEAdvertising - Crash with stack trace originating in Bluedroid (#4182)
* Fix for issue #4158: Crash with stack trace originating in Bluedroid
Improved configuration of scan response data in 'BLEAdvertising' avoids the crash:
- Added member variable 'm_scanRespData' to configure scan response differently from advertising data
- Initialization of 'm_scanRespData' in BLEAdvertising constructor
- Use of 'm_scanRespData' within BLEAdvertising::start() to configure the scan response
- 'Flags' and 'Appearance' are cleared in the scan response data
- With this fix, device names of up to 29 characters can be used without causing a crash.
2020-11-02 19:39:20 +02:00
Niklas Mollenhauer
f57c36782f
Add sendContent overload that takes a const char* and a length (#4276)
The web server currently lacks the ability to send a buffer. Only strings are supported.

This PR adds an overload to sendContent.
2020-11-02 19:17:02 +02:00
Hristo Kapanakov
3054bdf5a5
HTTPUpdateServer library (#4244) 2020-11-02 19:16:23 +02:00
Ivan Golubic
d6b91872cb
Fix for espressif#3460 issue (#4424)
Fixes: #3460

This code has been run in production for 1 month and it looks stable, no data dropped and it definitely fixes the issue described. I think that this can be merged to avoid using custom package referencing in PlatformIO that has been used in quite a few projects for now.

Co-authored-by: Ivan Golubic <ivan@mvt-solutions.com>
2020-11-02 18:59:03 +02:00
Me No Dev
d6b383f84b
Merge pull request #4429 from Bmooij/feature/Add_flash_helper_constructor_to_Uri
Add flash helper constructor to Uri
2020-11-02 18:56:08 +02:00
thewavelength
cadbad8850
Add partition label argument to Update and ArduinoOTA classThe UpdateClass in the Updater component has the ability to update data toa SPIFFS partition. It selects the first available partition using theESP-IDF esp_partition_find_first() function.That behaviour is problematic if one has multiple SPIFFS partitions.This change allows a user to pass the label argument (defaults to NULL)to UpdateClass::begin() so a specific SPIFFS partition can be updated.Additionally, ArduinoOTA can set this partition label using thenew method ArduinoOTAClass::setPartitionLabel which is optional.This change does not break compatibility. (#4442)
The UpdateClass in the Updater component has the ability to update data to
a SPIFFS partition. It selects the first available partition using the
ESP-IDF esp_partition_find_first() function.
That behaviour is problematic if one has multiple SPIFFS partitions.

This change allows a user to pass the label argument (defaults to NULL)
to UpdateClass::begin() so a specific SPIFFS partition can be updated.

Additionally, ArduinoOTA can set this partition label using the
new method ArduinoOTAClass::setPartitionLabel which is optional.

This change does not break compatibility.
2020-11-02 18:49:24 +02:00
thewavelength
3cbfa2ffef
Add partition label argument to SPIFFS (#4443)
* Add partition label argument to SPIFFSSPIFFS currently assumes there is only ever one partition.This change allows a user to pass the label argument (defaults to NULL)to SPIFFS::begin() so a specific SPIFFS partition can be referenced.This change does not break compatibility.
2020-11-02 18:47:36 +02:00
Jimmy Durand Wesolowski
360e04fa36
Fixing BLE GATT Characteristic notification and Characteristic Descriptor read (#4464)
* BLERemoteChar: fix descriptor 2902 write for characteristic notifications

When registering a notification on a characteristic, the 2902 descriptor
(CCCD) value is set to 1 (or 2 for indication).
According to the BLUETOOTH CORE SPECIFICATION Version 5.2, Revision Date
2019-12-31, section 4.12.3 "Write Characteristic Descriptors" (page 1588),
the characteristic descriptor write must expect a response.
Currently, the descriptor write is performed without expecting a reponse,
which prevents the notification to be functional with some BLE stacks.
This commit modify the write to expect the response.

Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>

* BLERemoteChar: forward GATT client event to characteristic descriptors

This commits prevents a permanent wait when calling BLERemoteDescriptor
readValue function, on the m_semaphoreReadDescrEvt semaphore.

ESP32 BLE stack calls to remote characteristic
- notification,
- value read
- value write
and remote characteristic descriptor
- value read
are asynchronous.

When such a call is performed by this library, a semaphore is taken prior
to the BLE stack read or write operation, and waited on after it.

Releasing the semaphore is done by the characteristic event handling
function (gattClientEventHandler), when the appropriate event is received.

However, the characteristic descriptor events are discarded, and the
value read semaphore is never released.

This commits forwards the GATT client events from the remote
characteristic down to their remote characteristic descriptor, and
implements their event handling.

Adding a semaphore for the remote characteristic descriptor value write
will be done in a separate commit.

Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>

* BLERemoteDescriptor: add semaphore to characteristic descriptor write

This adds a semaphore to characteristic descriptor value write, to mimic
the value read function, and to ensure completion of the operation before
we carry on.

Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>

Co-authored-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
2020-11-02 18:36:25 +02:00
Muhammad Mobashir
57145ade6f
Small description comment correction (#4471)
esp8266 --> esp32
2020-11-02 18:35:23 +02:00
snosrap
f39024675c
Don't convert to null-terminated string prior to writeValue (#4473)
fixes: #4472
2020-11-02 18:34:57 +02:00
JelleWho
f7fb00632e
#4293 added missing '<tr>' (#4450)
Fixes issue #4293
2020-10-27 15:35:54 +02:00
M Hotchin
7e40de226f
Fixes #4435 - WiFiClient improperly treats zero data available for read as an error (#4448) 2020-10-27 12:01:41 +02:00
Bob Mooij
ae240a3902 Add flash helper constructor to Uri 2020-10-19 16:20:49 +02:00
Dirk-Willem van Gulik
d79a1f3d10
Add an aditional (void *) arg to the RMT callback (much like Ticker() et.al.). (#3345)
* Add an aditional (void *) arg to the RMT callback - to allow more flexible handling of the callback (e.g. by passing a private struct or a class pointer). Same pattern as used by the Ticker() and many others. Example updated & new example with a trapoline added.

* Fix example for new API

* Fix lint warnings

* Add a second missed example.

* Correct timeout & improve socket error handling.
2020-10-14 14:41:50 +03:00
Dan Oprescu
ee3bb16c77
Fix support for following redirects added by ee88c42c3b (#4240) (#4385) 2020-10-14 14:32:47 +03:00
programminghoch10
c3f3497048
fixed some typos (#4395) 2020-10-14 14:27:49 +03:00
programminghoch10
18c3345451
fix typos in WiFiSTA.cpp (#4396)
* fix typos

* made return value description a bit more helpful
2020-10-14 14:27:19 +03:00
Vo Linh Truc
2685a5dd7b
Certificate isn't be free in case parse failure. (#4412)
I met problem while I was working with the WiFiClientSecure.
I tried to found the source of the problem, and I found it in the sll_client.cpp.
Please check my contribution.

I've open this problem in #4335 but received no response.
2020-10-14 14:25:26 +03:00
TANAKA Masayuki
675a40b257
Fix Not by reference. But the value was updated. (#3279) 2020-10-03 03:41:03 +03:00
Shawn A
f76ec4f50b
adds debugging to dnsserver (#1046) 2020-10-03 02:59:55 +03:00
sasodoma
219ff3005b
Add missing slashes in HTTPUpdate examples (#4238)
I spent quite a while today figuring out how to get an OTA update over HTTPS on a custom port working. A part of my problem was not putting a slash before the .bin filename, since it wasn't there in the example. This produced invalid HTTP requests. Adding the slash would make it clear that it needs to be there.

Given that the URL in line 53 contains the same words "server" and "file.bin", one might assume that in line 55, the slash after the port number would get added automatically, however I have found out that without a slash you get an invalid request. Adding the slash removes any doubt.
2020-10-03 02:13:27 +03:00
thebigpotatoe
99aa866477
Update MDNSResponder::addService to return a boolean (#4365)
I was playing with the mDNS service and noticed the method MDNSResponder::addService could return a Boolean with the way it is implemented just like other functions in this library.

This would be handy to know at a higher level weather or not the service was added correctly to the mDNS server of the ESP32.
2020-10-01 15:44:24 +03:00
Jens Hauke
82670b96f8
Fix for missed scan response data (BLEScan). (#4358)
This is a fix for missing scan responses after a first successfull scan.

While running the BLE_scan.ino sketch with wantDuplicates=false, i got
only one result with correct advertising and scan response length (31,26):

pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks(), false);
pBLEScan->start(scanTime, false);
...
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 26, addr type: 1

All following calls to start() just returned the advertising data without
scan response data:

pBLEScan->start(scanTime, false);
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 0, addr type: 1

With "wantDuplicates=true" i got:

pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks(), true);
pBLEScan->start(scanTime, false);
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 26, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 26, addr type: 1
[W][BLEScan.cpp:73] handleGAPEvent(): ESP_GAP_SEARCH_INQ_CMPL_EVT
Devices found: 1
Scan done!
pBLEScan->start(scanTime, false);
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 0, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 0 + 26, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 0, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 0 + 26, addr type: 1

Explicitly initializing m_scan_params.scan_duplicate of BLEScan solves
this issue (In my case the un-initialized value was
m_scan_params.scan_duplicate == 1073599044).

Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
2020-10-01 15:43:30 +03:00
lbernstone
9e7b13e46d
WebServer.handleClient delay (#4350)
* If WebServer.handleClient is run in a tight loop, it will starve other processes.  So, if there is no connection, throw in a delay(1).  Fixes #4348

* Made a variable to control the delay behavior
2020-10-01 15:42:23 +03:00
Tom Davis
1f4491f4ee
Updated AzureIoT submodule. (#4322) 2020-10-01 15:38:56 +03:00
wadim
aa529eb5a0
Fix getString() freeze on empty responses (#4317) 2020-10-01 15:36:23 +03:00
lbernstone
99c94bb482
Set SD state to idle before unregister (reduces power) (#4272) 2020-10-01 15:31:16 +03:00
Cristian Popescu
0957776855
Reinit updater md5 related fields (#4260)
MD5 cleanup on begin
Typos
2020-10-01 15:29:58 +03:00
Clickau
ee88c42c3b
Add support for following redirects in HTTPClient (#4240) 2020-10-01 14:41:54 +03:00
nicolaser15
663effa00e
Update Parsing.cpp (#4217)
* Update Parsing.cpp

When uploading TLS cert files the end of file "-----END CERTIFICATE-----" (or any kind of file with the sequence "CRLF--") is taken as posible end boundary. Then it is compared to the start boundary string. As it is expected, comparison turns to be false, and the whole end boundary string is put to _currentUpload->buf through _uploadWriteByte(). Here you have the problem: if you read boundary.length() bytes from HTTP request and you have some of the actual end boundary bytes in it, when you put all those bytes into _currentUpload->buf you are making a mistake. You will miss the actual end boundary string because some of those bytes were put in _currentUpload->buf.

* Update Parsing.cpp
2020-10-01 14:37:59 +03:00
lbernstone
882b12c44e
rmdir causes issues in SPIFFS. Fixes #4138, albeit not very cleanly (#4154)
SPIFFS causes crashes if you attempt to rmdir. Since there are no true directories in spiffs, this ought to be a noop. It looks like @me-no-dev worked around this by using unlink instead of rmdir, which works in fatfs and doesn't panic spiffs. This behavior is not universal. In order to get littlefs working, it would be good to get this back to conformity. Rather than digging deep into the upstream spiffs, I just check the mountpoint and noop if it is "/spiffs". So, if the user has changed the mountpoint, this will not work, but I think it's a pretty good tradeoff.
2020-10-01 13:52:24 +03:00
Dan Head
93d850f783
Fixed comment with correct FQDN (#4152) 2020-10-01 13:51:36 +03:00
buxtronix
4f48caca2c
Set scan_duplicate in BLE scan params (#4126)
This value is uninitialised and as such can be a random (and invalid) value. It's needs to be set per the espressif documentation here:

https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/bluetooth/esp_gap_ble.html#_CPPv4N21esp_ble_scan_params_t14scan_duplicateE

This PR sets it to DUPLICATE_DISABLE. Chosen as this is needed to ensure all scan data is populated in the scan callback, per this comment in the IDF:

https://github.com/espressif/esp-idf/blob/master/components/bt/host/bluedroid/stack/btm/btm_ble_gap.c#L3591

"//if scan duplicate is enabled, the adv packet without scan response is allowed to report to higher layer"

We **don't** want it to report to the higher layer (ie BLEScan.cpp) **unless** it has the active scan response.

Seems to resolve #3770 #3677 and possibly others.
2020-10-01 13:45:45 +03:00
Nikos Mouratidis
80e9e42c3b
Fix issue #3522 (WiFi does not restart after stopped) (#4114)
This commit fixes issue https://github.com/espressif/arduino-esp32/issues/3522 where WiFi service fails to start after a WiFi.disconnect(true) or a WiFi.mode(WIFI_OFF).
2020-09-30 15:34:10 +03:00
Emil Sandstø
494061af26
WebServer: Fix OOB write (#4088)
Successful exploitation could lead to arbitrary code execution.

The bug can be reproduced by running the following in a browser:
```
const formData = new FormData();
for (let i = 0;i < 33;++i) { formData.append("foo", i.toString()); }
await fetch("http://esp.local", { method: 'POST', body: formData });
```
2020-09-30 15:28:28 +03:00
Kevin Hester
2fd3d042b2
Fix #4046 Details below: (#4086)
Informed by the discussion in the bug and the code in 'that other branch'
the fix was clear.  Just set a flag if we start handling a write, and
use that flag to guard the long write complete call.
2020-09-30 15:27:35 +03:00
ToXIc
b551310c37
Minor change but could confuse some (#4084) 2020-09-30 15:26:38 +03:00
lbernstone
f30edd040e
Update CaptivePortal.ino (#4080)
* Update CaptivePortal.ino

Illegal SSID used for SoftAP

* Fixed ordering problem.  Now actually works
2020-09-30 15:26:15 +03:00
chegewara
b7c5e502e7
Add static pin support (#4078) 2020-09-30 15:25:42 +03:00
M. Betz
fa8a1c38d5
fix #4071 (#4072)
SPIFFS File object evaluates as true even if the file could not be opened.
2020-09-30 15:24:59 +03:00
cweinhofer
d56267bd8c
Update GetChipID.ino (#4070)
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
2020-09-30 15:24:29 +03:00
buxtronix
1f6b0b35f8
Have BLECLient gattc event handlers verify conn_id (#4064)
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
2020-09-30 15:21:59 +03:00
buxtronix
342b9cf2d8
Fix handling of registerForNotify in BLERemoteCharacteristic.cpp (#4063) 2020-09-30 15:20:28 +03:00
pulquero
11d071b1c8
Fix to allow more than one certificate to be loaded (espressif#3248). (#4056)
Co-authored-by: Mark Hale <mark.hale@physics.org>
2020-09-30 15:19:41 +03:00
Bascy
c1a7198e7d
Don't change owner if take() doesnt succeed (#3987) 2020-09-30 15:15:47 +03:00
lbernstone
19ccc479c3
WIFI_PS_MAX_MODEM feature requested #3896 (#3900) 2020-09-30 15:06:58 +03:00
robertpoll
c18d50cb91
Use esp_partition_* functions in Updater.cpp (#3898)
Background

The current implementation of Update() uses the spi_flash_* api to write and read from flash. These functions ignore the partition->encrypted flag and always write raw data to flash even if the partition is marked as encrypted.

Changes in this PR

Update() now uses the esp_partition_* api.
Wrapper functions for esp_partition_* added to ESP.cpp. This was done to maintain a consistent approach to the way the spi_flash_* functions were used. I note though that not all of the esp-idf functions are used are wrapped, for example esp_ota_get_next_update_partition() so it may be that these should not be added?
The current implementation of Update() changes the first (magic) byte of firmware to 0xFF on write, and then when the firmware is completely written changes it back to ESP_IMAGE_HEADER_MAGIC. This works without erasing the sector because flash bits can be changed from 1->0 (but not 0->1). If the flash is encrypted then the actual data written to flash will not be all ones, so this approach will not work. In addition, encrypted flash must be written in 16 byte blocks. So, instead of changing the first byte the changed code stashes the first 16 bytes, and starts writing at the 17th byte, leaving the first 16 bytes as 0xFF. Then, in _enablePartition() the stashed bytes can be successfully written.
Benefits

Whilst it's not possible to use encrypted flash directly from either the Arduino IDE or PIO it's reasonably straightforward to compile and flash a bootloader with the necessary support from a simple esp-idf project and then use ArduinoOTA for subsequent updates. This PR enables the use of this workflow until such time as encrypted flash is supported, and is a first (small) step toward adding support.
Regardless of the above, the esp_partition_* api is recommended over the api_flash_* api.
Application code should mostly use these esp_partition_* API functions instead of lower level spi_flash_* API functions. Partition table API functions do bounds checking and calculate correct offsets in flash, based on data stored in a partition table.
2020-09-30 15:06:19 +03:00
sindney
5197916983
Fix BLEClient disconnect bug (#3876)
By default the disconnect is broadcasted to every clients. So if you call disconnect on one connected client, they'll all be disconnected if we don't filter the event by conn_id.
2020-09-30 15:01:02 +03:00
Martijn Scheepers
7e9d42da68
ESP.getChipModel() and ESP.getChipCores() (#3847)
* ESP.getChipModel() returns model of the chip

* ESP.getChipCores() returns the core count.

* Example gives chip model, revision and core count.

* Read efuse for chipmodel

Co-authored-by: Martijn Scheepers <ms@SDNengineering.nl>
2020-09-30 14:57:36 +03:00
Bernd Giesecke
ef2b54547e
Fix issue #3833, data parsing of Eddystone TLM data frame (#3836)
* Fix issue #3833, data parsing of Eddystone TLM data frame    
Add Beacon scanner example to show usage of BLEEddystoneTLM class and  BLEEddystoneURL class     
Add EddystoneTLM beacon example    
Add EddystoneURL beacon example

* Fix buffer size for .toString()
2020-09-30 14:55:58 +03:00
jgdent
9856f0cc28
Update RMTLoopback.ino (#3823)
BUGFIX: avoids assertion in xEventGroupWaitBits()
(/home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/event_groups.c:350 (xEventGroupWaitBits)- assert failed!)
2020-09-30 14:52:22 +03:00
Mark D
af7ec4ead1
fix EEPROM class example (#3786) 2020-09-30 14:43:05 +03:00
kliment
7a92f89d12
Set TLS cert options before calling connect on client, so verify works (#3774)
When connecting using transportTraits, the CA and client certificates are ignored after the initial _client->connect() is called. This is because on connect, WiFiClientSecure will call start_ssl_client with _CA_Cert and other cert options set to null unless setCACert, setCertificate etc. are called before connect. Running _transportTraits->verify after connect therefore does exactly nothing. It's easy to verify that this is the case by passing a CACert to HTTPClient with verbose logging enabled - the logs will say "WARNING: Use certificates for a more secure communication!" which is only present when both PSK and CA are null. This change fixes the issue.
2020-09-30 14:41:03 +03:00
puuu
5871ca9ce9
UpdateClass::printError now accepts the Print object (#3763) 2020-09-30 14:39:25 +03:00
Mark D
0dfa5babc2
fix typo in WiFiMulti (#3737) 2020-09-30 14:37:21 +03:00
Andrzej Sierżęga
e4b2ce4e81
DNS resolving timeout change to prevent stack overlapping (#3731)
Real DNS resolving timeout used by lwip library is 14[s] (7[s] for DNS1 + 7[s] for DNS2). Function WiFiGenericClass::hostByName() has timeout set to lower value (only 4[s]), so callback function may be called after this low timeout and it may overlappe stack memory used now by other function.
Fixes #3722
2020-09-30 14:35:53 +03:00
Me No Dev
7af4490fcc
Update SPI.h 2020-09-30 14:34:37 +03:00
crnchbng
5999b7ba46
removed double delete of characteristics (#3521) 2020-09-30 14:25:31 +03:00
Sweety
9d547a8a44
Provisioning fixes for: 1.Space 2.Provisioned (#4291) 2020-08-25 11:03:06 +03:00
Sweety
1fd5cd79c5
Add OTA update feature
This sketch provide functionality for OTA firmware upgrade.
2020-08-25 11:01:58 +03:00
me-no-dev
4d98cea085 Add Wire:setPins(sda, scl)
Fixes: https://github.com/espressif/arduino-esp32/issues/3779
2020-07-19 02:21:15 +03:00
Nigel Mellor
b92c58d74b
M5Stack's product offering includes various ESP32-based camera devices. (#4030)
They are all broadly similar, all being based on the ESP32-D0WD core, but have
some subtle differences between variants around PSRAM inclusion and camera pin
mappings.

The ESP32CAM "unit" product (SKU: U007) has no PSRAM and maps the
"Pixel Data 0" (Y2 GPIO/OV2640 D2) camera pin to IO17 rather than IO32 as is
the case with most other M5Stack ESP32 camera devices.

The ESP32CAM also requires the "hmirror" and "vflip" camera configuration
bits setting in order to capture a true image.

The relevant M5Stack pin configuration documentation can be found here:
https://docs.m5stack.com/#/en/unit/esp32cam?id=pinmap
2020-06-01 01:41:56 +03:00
James.Y
35d9759fa6
Fix for issue 3974 m_connectedCount incorrectly decremented when no connection exists
There is no need to decrement if nothing was removed from removePeerDevice

Reference issue:
#3974
2020-06-01 01:35:01 +03:00
Gitshaoxiang
79f77afc98
update M5Camera pins (#4021)
* change m5camera pins

* add M5Camera version B pins

* add M5Camera version B pins
2020-05-22 12:59:33 +03:00
Verkehrsrot
594ee6d249
Update SD_MMC.cpp (#4020)
According to ESP-IDF API
dc14d027ce/docs/en/api-reference/peripherals/sdmmc_host.rst :

"To configure the bus width, set the width field of :cpp:class:`sdmmc_slot_config_t`. For example, to set 1-line mode:

sdmmc_slot_config_t slot = SDMMC_SLOT_CONFIG_DEFAULT();
slot.width = 1;
"
2020-05-22 11:07:40 +03:00
sweetymhaiske
4d118b36a2
Minor modifications in provisioning (#3919) 2020-04-21 14:39:26 +03:00
sweetymhaiske
2c9b648502
Add support of unified provisioning to Arduino
1. WiFiProv.ino sketch is added that allows arduino users to do provisioning via SoftAP or BLE. WiFi.beginProvision( ) API is designed for provisioning in Arduino.
2. In WiFiProv.h provisioning class is defined.
3. WiFiProv.cpp contains implementation for provisioning class.
4. README.md file is added which contains detail information for working.
2020-04-15 23:37:55 +03:00
Alexander Bergmann
13e02063d6
Move _STREAM_BOUNDARY before _STREAM_PART (#3720)
The boundary delimiter (_STREAM_BOUNDARY) needs to be send before the
body part (_STREAM_PART) too follow RFC2046. This caused ffplay/ffmpeg
to fail to open the MJPEG stream.
2020-02-14 11:03:38 +02:00
Me No Dev
109ba7a3b4
Revert "std::shared_ptr Memory Leak (#3680)" (#3682)
This reverts commit b2c678877c.
2020-01-29 12:30:08 +02:00
chuck todd
b2c678877c
std::shared_ptr Memory Leak (#3680)
* std::shared_ptr Memory Leak

clientSocketHande and _rxBuffer are std::shared_ptr, the stop() call was not correctly releasing them and the operator= had similar problems fix for #3679

* operator= second attempt

* operator= third time
2020-01-29 12:18:54 +02:00