workaround for #5043. There is a timing issue with HardwareSerial::end. I'm not sure what is hung, but it should be possible to see this in jtag, as it does cause a reboot if you let it. The delay needs to be before you detach the device!?
This is very much still work in progress and much more will change before the final 2.0.0
Some APIs have changed. New libraries have been added. LittleFS included.
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Mike Dunston <m_dunston@comcast.net>
Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com>
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com>
Co-authored-by: tobozo <tobozo@users.noreply.github.com>
Co-authored-by: bobobo1618 <bobobo1618@users.noreply.github.com>
Co-authored-by: lorol <lorolouis@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Sweety <switi.mhaiske@espressif.com>
Co-authored-by: Loick MAHIEUX <loick111@gmail.com>
Co-authored-by: Larry Bernstone <lbernstone@gmail.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Co-authored-by: 快乐的我531 <2302004040@qq.com>
Co-authored-by: chegewara <imperiaonline4@gmail.com>
Co-authored-by: Clemens Kirchgatterer <clemens@1541.org>
Co-authored-by: Aron Rubin <aronrubin@gmail.com>
Co-authored-by: Pete Lewis <601236+lewispg228@users.noreply.github.com>
Fixed use of CONFIG_BLUEDROID_ENABLED instead of CONFIG_BT_ENABLED in HAL. This prevented compilation with Nimble-only configuration without apparent benefit.
Added guarded define to set the stacksize on the main looptask.
Advantage of this is that build_flags can be used to provide a different value for the stack size should it be neccessary
default behaviour is unaffected
* fix typo in WiFiMulti
* clean up trailing spaces
* clean up script file used in cleaning
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* Corrections of Find, FindUntil and FindMulti
Find has some bug that is not working with Ethernet.find() so, I copied code from Stream.h and Stream.cpp in AVR-CORE library and now it's working perfectly.
I don't know where was the error, but an Ethernet.find compiled to MEGA2560 was working but not working when compiled to esp32, after corrections of code (copy of AVR-Core libraries) it's working perfect.
So probably has some error on original ESP32-Core library.
Below is part of code that was working with MEGA2560 and not with ESP32 libraries.
client.find never return TRUE with ESP32 original library and with AVR it's works.
boolean esp32_fw_update(EthernetClient &client, DecodedHeader &header, const String &field_filename, const String &field_crc) {
char bound[header.boundary.length()+3];
char term[]="\r\n";
strcpy(bound,header.boundary.c_str());
strcat(bound,term);
while (client.find(bound)) {
String line=client.readStringUntil('\r');
* Update Stream.h
* Update Stream.cpp
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* Add an aditional (void *) arg to the RMT callback - to allow more flexible handling of the callback (e.g. by passing a private struct or a class pointer). Same pattern as used by the Ticker() and many others. Example updated & new example with a trapoline added.
* Fix example for new API
* Fix lint warnings
* Add a second missed example.
* Correct timeout & improve socket error handling.
Fixes crash on ESP32 when I2C FiFo overflows and interrupt function is unable to handle crash and throws this error:
[E][esp32-hal-i2c.c:1013] i2c_isr_handler_default(): unknown int=4
Co-authored-by: 0xDEADBEEF <0xde4dbeef@gmail.com>
Background
The current implementation of Update() uses the spi_flash_* api to write and read from flash. These functions ignore the partition->encrypted flag and always write raw data to flash even if the partition is marked as encrypted.
Changes in this PR
Update() now uses the esp_partition_* api.
Wrapper functions for esp_partition_* added to ESP.cpp. This was done to maintain a consistent approach to the way the spi_flash_* functions were used. I note though that not all of the esp-idf functions are used are wrapped, for example esp_ota_get_next_update_partition() so it may be that these should not be added?
The current implementation of Update() changes the first (magic) byte of firmware to 0xFF on write, and then when the firmware is completely written changes it back to ESP_IMAGE_HEADER_MAGIC. This works without erasing the sector because flash bits can be changed from 1->0 (but not 0->1). If the flash is encrypted then the actual data written to flash will not be all ones, so this approach will not work. In addition, encrypted flash must be written in 16 byte blocks. So, instead of changing the first byte the changed code stashes the first 16 bytes, and starts writing at the 17th byte, leaving the first 16 bytes as 0xFF. Then, in _enablePartition() the stashed bytes can be successfully written.
Benefits
Whilst it's not possible to use encrypted flash directly from either the Arduino IDE or PIO it's reasonably straightforward to compile and flash a bootloader with the necessary support from a simple esp-idf project and then use ArduinoOTA for subsequent updates. This PR enables the use of this workflow until such time as encrypted flash is supported, and is a first (small) step toward adding support.
Regardless of the above, the esp_partition_* api is recommended over the api_flash_* api.
Application code should mostly use these esp_partition_* API functions instead of lower level spi_flash_* API functions. Partition table API functions do bounds checking and calculate correct offsets in flash, based on data stored in a partition table.
* ESP.getChipModel() returns model of the chip
* ESP.getChipCores() returns the core count.
* Example gives chip model, revision and core count.
* Read efuse for chipmodel
Co-authored-by: Martijn Scheepers <ms@SDNengineering.nl>
* Minimize HardwareSerial Receive and Transmit delays
* Remove uartRxFifoToQueue from esp-hal-uart.h
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* fix removeApbChangeCallback() error in spiStopBus()
spiStartBus() was using spiStopBus() to init the hardware, one of spiStopBus() functions is to unregister the runtime CPU clock speed change callback. But, spiStartBus() only wanted to init the hardware. This patch separates the hardware init into a standalone function spiInitBus() that both spiStartBus() and spiStopBus() call.
* Update esp32-hal-spi.c
capitalization problem
* API compatibility to AVR, ESP8266, et al
* Add non-blocking HardwareSerial::read(buffer, size) extension (ESP8266 portability)
* Refactor for fewer indirect calls.
With the >= used let's say you have four RMT inputs, each using 2 channels wide for their receive buffer. This is 4*2 = 8 buffers which is the number of hardware buffers (MAX_CHANNELS). But, for the fourth input the starting buffer will be 6 (this is correct, the buffers used for each input are 0-1, 2-3, 4-5, 6-7). But, 6+2 = 8 which is MAX_CHANNELS. This is valid but the >= would match against it and abort. It is correct to only abort if the value i+j is only greater than MAX_CHANNELS. Thus, a simple one character fix. Delete the equals sign.
* `ledcWriteTone()` added a `apbcallback()` evertime the tone value was non zero.
* `addApbChangeCallback()` did not detect duplicate callbacks.
* changed the apbcallback list to a double link to support roll forward, roll back execution. This made the sequences of clock change callback start with the newest registered -> to oldest on the `before` then oldest -> newest after the clock change. This made the UART debug log output have minimal gibberish during the clock change.
* change how the UART callback handled the MUTEX because if any `apbchangeCallback()` executed a `log_x()` a deadlock would occur.
This fixes#3555
* Update esp32-hal-bt.c
BluetoothSerial crash when restart: this is because the BT controller remains in state ESP_BT_CONTROLLER_STATUS_INITED instead of state ESP_BT_CONTROLLER_STATUS_IDLE after the end() method.
in file esp_bt.h it is specified
> @brief Enable BT controller.
> Due to a known issue, you cannot call esp_bt_controller_enable() a second time
> to change the controller mode dynamically. To change controller mode, call
> esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode.
after **esp_bt_controller_disable()** the controller remains in state INITED so we do call the **esp_bt_controller_deinit()** function to put the controller into state IDLE.
i have modified the **esp32-hal-bt.c** file
line 57 and next
(i have insert the esp_bt_controller_deinit() function so the controller go into Idle state)
```c++
bool btStop(){
if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_IDLE){
log_i("bt stopped");
return true;
}
if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED){
log_i("bt enabled");
if (esp_bt_controller_disable()) {
log_e("BT Disable failed");
return false;
}
while(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED);
}
if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_INITED){
log_i("inited");
if (esp_bt_controller_deinit()) {
log_e("BT deint failed");
return false;
}
while (esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_INITED);
return true;
}
log_e("BT Stop failed");
return false;
}
```
* Update esp32-hal-bt.c
remove while to avoid infinite loop
