Commit Graph

1147 Commits

Author SHA1 Message Date
me-no-dev
2e5743eaa1 Fix enable Update partition 2017-06-03 20:11:41 +03:00
Fabian Affolter
1d4973a40b Fix heading (#412) 2017-06-02 18:21:54 +02:00
Tuan PM
fb595e5751 add esp32vn-iot-uno board (#398)
Update boards files
2017-06-02 17:43:09 +02:00
me-no-dev
5b216b6622 Updater was missing enablePartition 2017-06-02 18:29:37 +03:00
me-no-dev
063d608e18 Optimize Update class
- add roll back API to switch the running partition
- do not write the partition magic until the end to prevent booting
into partially written update
2017-06-02 18:24:26 +03:00
me-no-dev
dcdf8132d6 Increase partition size to 1.25MB so BT and WiFi can fit
Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 13:13:44 +03:00
me-no-dev
0e513f3a4b Make sure WiFi is initialized in disconnect.
Fixes: https://github.com/espressif/arduino-esp32/issues/400
2017-05-29 13:12:42 +03:00
me-no-dev
5d92784710 Call esp_wifi_start in WiFi::begin
Fixes: https://github.com/espressif/arduino-esp32/issues/391
2017-05-23 11:32:03 +03:00
bbx10
432bcf5a0a Add WiFiServer hasClient and WiFiTelnetToSerial example (#394)
WiFiTelnetToSerial is also a test for hasClient().
2017-05-23 08:12:39 +02:00
me-no-dev
db09ca8c16 Make SimpleBLE work again
Fixes: https://github.com/espressif/arduino-esp32/issues/373
2017-05-22 17:50:57 +03:00
me-no-dev
b6e83fac62 Initial WiFi auto reconnect implementation
This needs proper testing!
Fixes: https://github.com/espressif/arduino-esp32/issues/353
2017-05-22 16:29:41 +03:00
me-no-dev
7db8f70956 change return type of micros() and millis()
Fixes: https://github.com/espressif/arduino-esp32/issues/384
2017-05-22 15:47:12 +03:00
me-no-dev
21ff3d0e32 Slight rework of WiFi Class
- call esp_wifi_start()
- separate tcp initialization to prepare for Ethernet
- setup dhcp addresses when using custom IP config for SoftAP
2017-05-22 15:31:23 +03:00
me-no-dev
88293a4284 Implement WiFiClient.peek()
Thanks @miomir1981
2017-05-22 15:27:34 +03:00
bbx10
06a76eebe8 Remote tcp disconnect not detected (#389)
* Add setNoDelay and getNoDelay to WiFiServer class

* Remote TCP disconnect not detected
2017-05-22 14:16:07 +02:00
copercini
51a4432ca8 HTTPClient Port (#347)
* Fix possible infinite loop in the example

* Remove workaround of sockets always return -76 

Remove workaround of sockets always return -76 (because it's fixed on IDF now)
Remove delay during handshake (improving stability)

* Remove unusable mbedtls_net of context creation

* Fix bad destructor

* Compatibility with WiFiClient for HTTPClient

* Initial port from ESP8266

Changed SHA1 fingerprint by Root CA verification
Changed log system

* Remove deprecated function
2017-05-19 10:18:20 +02:00
Max
05a3de262a Remove LEDC_BASE_FREQ to calculate duty (#381) 2017-05-19 10:16:55 +02:00
me-no-dev
d36e9bbfa9 Change deprecated esp_efuse_read_mac method 2017-05-15 21:35:25 +03:00
me-no-dev
4765554afd Update IDF to 1e0710f 2017-05-15 21:31:11 +03:00
me-no-dev
4b47402afd Use static buffer for log_printf 2017-05-15 20:53:45 +03:00
me-no-dev
befebb7242 Change DPORT access macros 2017-05-15 20:53:09 +03:00
Max
c64796c7d2 Add NodeMCU-32S board (#375)
Board from AI-Thinker
2017-05-12 18:01:50 +02:00
MangoGeek
7b63f58683 add support for widora-air board (#367)
* add support for widora-air board

* change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
Limor "Ladyada" Fried
e960bb64f0 feather variant (#364) 2017-05-08 23:06:30 +03:00
WEMOS Electronics
3b86e0c0bc Update LED_BUILTIN pin for LOLIN32 (#362)
* Add ESP.getChipId() function to get ESP32's ChipID.

* change getChipId() to getEfuseMac()

* * Change board:Lolin32 to LOLIN32
* Update LED_BUILTIN pin for LOLIN32
2017-05-08 12:47:37 +03:00
Me No Dev
376961d168 Update IDF to 65acd99 (#358)
* Update IDF to 65acd99

* Update platformio and arduino build paths and libs

* Update esptool binaries
2017-05-06 20:29:12 +03:00
me-no-dev
450df7e3f8 fix libb64
Implements: https://github.com/esp8266/Arduino/pull/2883
Fixes: https://github.com/espressif/arduino-esp32/issues/313
Fixes: https://github.com/espressif/arduino-esp32/issues/344
2017-05-06 18:56:25 +03:00
me-no-dev
673f453da0 BT define the hal methods even if BT is disabled (but return false) 2017-05-06 18:50:20 +03:00
me-no-dev
768e57f285 Fix BT enabled check 2017-05-06 18:40:23 +03:00
me-no-dev
b1b77a658f WiFiClient::peek should return -1 instead of 0
Fixes: https://github.com/espressif/arduino-esp32/issues/329
2017-05-06 18:30:38 +03:00
me-no-dev
b879f80017 Allow Arduino to be run without BT support in IDF
Fixes: https://github.com/espressif/arduino-esp32/issues/343
2017-05-06 18:27:03 +03:00
WEMOS Electronics
a38ffe58fe Add ESP.getChipId() function to get ESP32's ChipID. (#322)
* Add ESP.getChipId() function to get ESP32's ChipID.

* change getChipId() to getEfuseMac()
2017-05-05 09:59:54 +03:00
Severin Smith
cc73f17add SPI_MODE2 and SPI_MODE3 configurations inverted (#345)
It appears that the configurations for `ck_out_edge` were inverted for `SPI_MODE2` and `SPI_MODE3`. You can check the technical reference manual on page 76, table 23 "Clock Polarity and Phase, and Corresponding SPI Register Values for SPI Master".

I've check with my oscilloscope that the current configuration is wrong and this fix corrects the issue.
2017-05-05 09:59:18 +03:00
tzxespressio
6006308575 fix some compile issue in cpp project(like WiFiMulti.h) (#350) 2017-05-05 09:59:01 +03:00
Martin Sloup
32c028a27e #334: Update boards.txt for Onehorse's ESP32 Dev Module (#337) 2017-04-28 13:29:04 +03:00
Ahmed Talaat
a95b1fd33b Update package_esp32_index.template.json (#324)
fixing github url.
2017-04-22 16:42:23 +03:00
Me No Dev
a0c6ee021b Update default.csv (#326) 2017-04-22 16:40:35 +03:00
me-no-dev
aad4b336d6 Add default config for BT init and offsets for partition table 2017-04-22 16:33:07 +03:00
Me No Dev
57028ad65e Update default.csv
Remove missing column so github can beautify the contents
2017-04-22 16:17:45 +03:00
me-no-dev
7d0968c10d Update bootloader to better handle QIO 2017-04-13 09:20:03 +03:00
me-no-dev
ee14bc2cc6 Mute leftover debug from WiFi 2017-04-13 09:13:45 +03:00
Me No Dev
56ef31f899 Update IDF to version 3cad00f (#310) 2017-04-12 21:49:58 +03:00
me-no-dev
fd81fd0ac3 Fix BT init compilation error
Fixes: https://github.com/espressif/arduino-esp32/issues/309
2017-04-12 20:53:21 +03:00
Me No Dev
6519a35799 Fix WifiUDP::beginMulticastPacket()
Fixes: https://github.com/espressif/arduino-esp32/issues/304

Thanks @jliegner :)
2017-04-11 00:08:18 +03:00
Me No Dev
2b075f3204 It's pyserial not serial 2017-04-04 02:50:27 +03:00
Me No Dev
f13127bd36 install python serial for travis 2017-04-04 02:49:07 +03:00
me-no-dev
2f02e27327 Update esptool on mac and windows and revert linux to use python 2017-04-04 02:36:55 +03:00
me-no-dev
7e5b278107 Add new control to WiFi Scan 2017-04-04 02:03:54 +03:00
me-no-dev
b465858563 Check and format NVS partition if size has changed 2017-04-04 01:27:26 +03:00
me-no-dev
80322311f1 Update IDF 2017-04-04 01:26:23 +03:00