arduino-esp32/docs/esp-idf_component.md

To use as a component of ESP-IDF

• Download and install esp-idf

• Create blank idf project (from one of the examples)

• in the project folder, create a folder called components and clone this repository inside

  mkdir -p components && \
  cd components && \
  git clone https://github.com/espressif/arduino-esp32.git arduino && \
  cd arduino && \
  git submodule update --init --recursive && \
  cd ../.. && \
  make menuconfig
  

• make menuconfig has some Arduino options

  • "Autostart Arduino setup and loop on boot"

    • If you enable this options, your main.cpp should be formated like any other sketch

      //file: main.cpp
      #include "Arduino.h"
      
      void setup(){
        Serial.begin(115200);
      }
      
      void loop(){
        Serial.println("loop");
        delay(1000);
      }
      

    • Else you need to implement app_main() and call initArduino(); in it.

      Keep in mind that setup() and loop() will not be called in this case. If you plan to base your code on examples provided in esp-idf, please make sure move the app_main() function in main.cpp from the files in the example.

      //file: main.cpp
      #include "Arduino.h"
      
      extern "C" void app_main()
      {
          initArduino();
          pinMode(4, OUTPUT);
          digitalWrite(4, HIGH);
          //do your own thing
      }
      

  • "Disable mutex locks for HAL"
    • If enabled, there will be no protection on the drivers from concurently accessing them from another thread/interrupt/core
  • "Autoconnect WiFi on boot"
    • If enabled, WiFi will start with the last known configuration
    • Else it will wait for WiFi.begin

• make flash monitor will build, upload and open serial monitor to your board