95 lines
3.6 KiB
Markdown
95 lines
3.6 KiB
Markdown
# Wi-Fi FTM Responder Arduino Example
|
|
|
|
This example demonstrates how to use the Fine Timing Measurement (FTM) to calculate the distace from the Access Point and the device. This is calculated by the Wi-Fi Round Trip Time (Wi-Fi RTT) introduced on the [IEEE Std 802.11-2016](https://en.wikipedia.org/wiki/IEEE_802.11mc) standard.
|
|
|
|
This example will simulate the Router with FTM capability.
|
|
|
|
This example was based on the [ESP-IDF FTM](https://github.com/espressif/esp-idf/tree/master/examples/wifi/ftm). See the README file for more details about on how to use this feature.
|
|
|
|
Some usages for this feature includes:
|
|
|
|
* Indoor positioning systems.
|
|
* Navigation.
|
|
* Device Location.
|
|
* Smart Devices.
|
|
* Alarms.
|
|
|
|
# Supported Targets
|
|
|
|
Currently, this example supports the following targets:
|
|
|
|
| Supported Targets | ESP32-S2 | ESP32-C3 |
|
|
| ----------------- | -------- | -------- |
|
|
|
|
## How to Use Example
|
|
|
|
See the **Initiator** example to prepare the environment.
|
|
|
|
* How to install the Arduino IDE: [Install Arduino IDE](https://github.com/espressif/arduino-esp32/tree/master/docs/arduino-ide).
|
|
|
|
### Configure the Project
|
|
|
|
To configure this project, you can change the following configuration related to STA:
|
|
|
|
```c
|
|
// Change the SSID and PASSWORD here if needed
|
|
const char * WIFI_FTM_SSID = "WiFi_FTM_Responder";
|
|
const char * WIFI_FTM_PASS = "ftm_responder";
|
|
```
|
|
|
|
* Change the Wi-Fi `SSID` and `PASSWORD` as the same as the Initiator.
|
|
|
|
To see more details about FTM, please see the [ESP-IDF docs](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-reference/network/esp_wifi.html).
|
|
|
|
#### Using Arduino IDE
|
|
|
|
To get more information about the Espressif boards see [Espressif Development Kits](https://www.espressif.com/en/products/devkits).
|
|
|
|
* Before Compile/Verify, select the correct board: `Tools -> Board`.
|
|
* Select the COM port: `Tools -> Port: xxx` where the `xxx` is the detected COM port.
|
|
|
|
#### Using Platform IO
|
|
|
|
* Select the COM port: `Devices` or setting the `upload_port` option on the `platformio.ini` file.
|
|
|
|
## Log Output
|
|
|
|
Expected log output:
|
|
|
|
```
|
|
Build:Oct 25 2019
|
|
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
|
|
SPIWP:0xee
|
|
mode:DIO, clock div:1
|
|
load:0x3ffe6100,len:0x4b0
|
|
load:0x4004c000,len:0xa6c
|
|
load:0x40050000,len:0x25c4
|
|
entry 0x4004c198
|
|
Starting SoftAP with FTM Responder support
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
***Important: Make sure you are using a good quality USB cable and that you have a reliable power source.***
|
|
|
|
* **Programming Fail:** If the programming/flash procedure fails, try reducing the serial connection speed.
|
|
* **COM port not detected:** Check the USB cable and the USB to Serial driver installation.
|
|
|
|
If the error persist, you can ask for help at the official [ESP32 forum](https://esp32.com) or see [Contribute](#contribute).
|
|
|
|
## Contribute
|
|
|
|
To know how to contribute to this project, see [How to contribute.](https://github.com/espressif/arduino-esp32/blob/master/CONTRIBUTING.rst)
|
|
|
|
If you have any **feedback** or **issue** to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!
|
|
|
|
Before creating a new issue, be sure to try the Troubleshooting and to check if the same issue was already created by someone else.
|
|
|
|
## Resources
|
|
|
|
* Official ESP32 Forum: [Link](https://esp32.com)
|
|
* Arduino-ESP32 Official Repository: [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32)
|
|
* ESP32-S2 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf)
|
|
* ESP32-C3 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf)
|
|
* Official ESP-IDF documentation: [ESP-IDF](https://idf.espressif.com)
|