Commit Graph

1378 Commits

Author SHA1 Message Date
me-no-dev
81844f5360 Add API to feed the loop WDT (call from loop only) 2019-01-12 13:02:38 +01:00
Me No Dev
f7cf583b87
Update README.md
Add download counter for releases
2019-01-11 10:17:45 +01:00
Me No Dev
e8a2c16c8f
Update issue templates 2019-01-11 02:21:32 +01:00
chuck todd
9a7946e685 I2C fix READ of zero bytes hardware hang (#2301)
The i2c peripheral will hang if a READ request is issued with a zero data length.  The peripheral
drops into a continuous timeout interrupt response.  The STOP command can not be set out to the I2C
bus. The SLAVE device correctly ACK'd the address byte, with READ bit set, it has control of the SDA
 pin.  The ESP32 send out the next SCL HIGH pulse but, since the SLAVE is in READ Mode, and the First
bit it is sending happened to be a ZERO, the ESP32 cannot send the STOP.  When it releases SDA during
the SCL HIGH, the pin does not change state.  The pin stays low because the SLAVE is outputing a LOW!
The ESP32 drops into a perminent WAIT state waiting for SDA to go HIGH (the STOP).

**esp32-hal-i2c.c**
* add databuff length checks to `i2cRead()` and `i2cWrite()`
2019-01-10 21:37:13 +01:00
Ivan Kravets
566b69eda3 Test @PlatformIO with CameraWebServer example (#2300) 2019-01-10 15:54:12 +01:00
Ivan Kravets
e544e67838 PlatformIO: Revert back default partition table to "default.csv" (#2299) 2019-01-10 15:53:51 +01:00
me-no-dev
b0582e1ec8 Fix compilation failing on Windows because of liblib.a 2019-01-10 09:23:25 +01:00
lbernstone
a539257a38 An example to read high frequency analog data using i2s_adc (#2295) 2019-01-10 08:24:17 +01:00
me-no-dev
70656aa129 fix leak in log_printf 2019-01-09 21:37:31 +01:00
Me No Dev
fa61b3bffe
Update IDF to e931fe9 and add esp-face (#2291)
* Update IDF to e931fe9 and add esp-face

* Fix PIO builds fail because of sketch size

* Fix example build failing for Arduino
2019-01-09 19:31:46 +01:00
dragon-engineer
452c27a74a Added ESP32 FM DevKit - Fixed unused pins definitions. (#2288)
* Added ESP32 FM DevKit

* Added ESP32 FM DevKit variant

Fixed pin definitions for unused pins.
2019-01-09 16:50:41 +01:00
Me No Dev
2fd39b1aff
Handle APB frequency change (#2250)
* Add APB change callbacks and move cpu code to own file

* Properly set esp_timer and FreeRTOS tick dividers

* Improve updated devisors

* No need to update REF_TICK yet

* Add initial handling for UART baud change

* fix uartWriteBuf and uartDetectBaudrate

* trigger callbacks even when APB did not change

* toggle UART ISR on CPU change

* add XTAL freq getter and add cpu freq validation

* Support CPU frequency changes in I2C (#2287)

**esp32-hal-i2c.c**
* add callback for cpu frequency changes
* adjust fifo thresholds based on cpu frequency and i2c bus frequency
* reduce i2c bus frequency if differential is too small
**Wire.h**
* version to 1.1.0

* Implement clock change for the other peripherals

* remove bad CPU clock values from the menu

* Add note to CPU freqs that support WiFi and BT
2019-01-09 10:07:54 +01:00
HanCheol Cho
ff18a211e4 Add OROCA EduBot Board (#2264) 2019-01-06 21:47:55 +02:00
Shelby Merrick
a6e3b29004 Added support for using TCPIP_ADAPTER_IF_MAX to join igmp groups on all (#2279)
interfaces
2019-01-06 21:29:38 +02:00
johannesmaibaum
812d131663 Correct comment in SPI_Multiple_Buses.ino (#2272)
The default SPI bus is VSPI (see libraries/SPI/src/SPI.cpp). This change corrects a misleading comment in a code example which was stating wrongly that HSPI would be the default one.
2019-01-04 15:26:32 +02:00
Jeroen88
00e69a28bc Redo PR #2259 because I messed up my local git (#2263) 2019-01-02 17:44:17 +02:00
copercini
229d9b7366 [WiFiClientSecure] Shows only free internal heap on logs (#2252)
* Shows only free internal heap on logs

Since Mbedtls is running only on internal heap, show internal + PSRAM available memory on logs can confuse the users

* Clarify logs
2018-12-31 11:44:57 +02:00
me-no-dev
6dd8be3262 Use more agressive disconnect on wifi connect error 2018-12-28 21:23:17 +02:00
me-no-dev
28ea39cf05 Add WDT API for Core 0 and disable it while SPIFFS is formatting 2018-12-28 21:14:46 +02:00
Me No Dev
f49c854ff3
Update IDF to 97eecfa, enable reboot on WDT and add WDT API (#2248)
* Update IDF to 97eecfa and enable reboot on WDT

* Add API to enable/disable WDT for Core 1 and Arduino Loop
2018-12-28 20:37:33 +02:00
me-no-dev
879388e170 Update esp32-hal-gpio.c
fix copy/paste error
2018-12-28 19:14:15 +02:00
Me No Dev
1085e9a8f0
Fix bad multiplier calculation 2018-12-24 13:55:08 +02:00
Verkehrsrot
bed9c96f41 update board files for LoPy, LoPy4, T-Beam (#2241)
changed LORA_IO0 -> LORA_IRQ
added LORA_RST
added SS
2018-12-24 13:08:12 +02:00
Tomasz Ścisłowicz
5af139bb74 HardwareSerial - add changeBaudRate method (#2223)
* Add updateBaudRate to hardware serial

* remove flush

* Fix tab
2018-12-23 21:15:06 +02:00
atanisoft
4f9a90fa0e fix #2232 and #2033 (#2233) 2018-12-23 19:06:43 +02:00
chuck todd
310e78e6fd Support CPU frequency changes (#2222)
The I2C hardware has limitations on min and max bus frequency directly related to CPU frequency, bus speed cannot be greater than 1/100 CPU clock, nor less than CPU clock / 8192.
2018-12-20 08:56:02 +01:00
Me No Dev
c827bb4177
CPU and APB Frequency support (#2220)
* Add support to HAL for APB frequencies different than 80MHz

* Add support for CPU frequencies in the IDE board menu

* Switch to fast set_config

* Add method to uart so debug can be reassigned after apb frequency switch

* Return real APB frequency
2018-12-20 01:57:32 +01:00
me-no-dev
1628f533a1 Add Camera WebServer Example 2018-12-20 00:41:48 +01:00
me-no-dev
3e66aeff84 Handle better 160MHz cpu clock 2018-12-18 22:04:02 +01:00
me-no-dev
66d33f792c Add support for CPU Frequency switching
Experimental!
2018-12-18 20:04:16 +01:00
atanisoft
0de0d3f79a move call to setTimeout() to after the client connects. (#2214)
This is necessary to avoid this log entry from being generated due to invalid usage of setTimeout:
[E][WiFiClient.cpp:236] setSocketOption(): 1006 : 9
2018-12-18 19:21:36 +01:00
Umut Erkal
512d0d088f Add Turta IoT Node Board (#2208) 2018-12-17 23:11:05 +01:00
me-no-dev
77810471ce Move Example to proper folder 2018-12-16 19:24:02 +01:00
Muhammad Lutfi Santoso
be081ac026 Add FreeRTOS multi-thread example (#2067)
* Add FreeRTOS exsample

* Update Code

* Change stack size

* Fix LED_BUILTIN not defined

Fix LED_BUILTIN not defined
2018-12-16 18:09:57 +01:00
Bascy
4d3f6caa0d Add quotes around macro value (Issue #2193) (#2197)
* Replaced ARDUINO_VARIANT with const char

* Fixed missing return value

* Added quotes around defined value in macro (Issue #2193)
2018-12-16 17:10:56 +01:00
Me No Dev
2db811f7f3
Update build tools (#2200) 2018-12-16 17:09:44 +01:00
atanisoft
39836f12df correct bounds checking in Print::printf to avoid corner case of len=64 (#2204) 2018-12-16 17:09:26 +01:00
petefats
25fd2d0f3b OTA success reporting fix (#2202) 2018-12-16 13:00:15 +01:00
me-no-dev
278fa0d87a Fix read(), peek() and available() in WiFiClientSecure
closes: https://github.com/espressif/arduino-esp32/pull/2151
2018-12-15 18:14:38 +01:00
copercini
b37f4069e4 Increase _network_event_task priority (#2184)
Fixes https://github.com/espressif/arduino-esp32/issues/1595
2018-12-15 17:39:51 +01:00
atanisoft
e602145c2b fix #2105 (#2192) 2018-12-15 17:39:20 +01:00
Me No Dev
6f6ee98188
Update ESP-IDF da2116f + esp32-camera f8f26ab + BLE b232e7f (#2194)
* ESP-IDF da2116f + esp32-camera f8f26ab +BLE b232e7f

* Fix fail compilation due to missing cpp guard
2018-12-15 17:38:34 +01:00
Jeroen88
1289f4be4b Add MD5 computation to Esp and add request header with MD5 hash of the running sketch to HTTPUpdate (#2176) 2018-12-11 02:06:58 +01:00
Andy Horner
70f000da71 Fix a compilation error if Bluetooth not enabled (#2172) 2018-12-10 10:11:37 +01:00
Jeroen88
884e417a49 Fix HTTPUpdate flash size check and add SPIFFS size check (#2161)
* Fix error in PR #2048: if ::available() is called before ::connect() _rxBuffer is not initialised

* Fixed flash size check and added SPIFFS size check

* Rewriting ESP.getFreeSketchSpace(), moving code from HTTPUpdate.cpp
2018-12-06 20:39:52 +01:00
Me No Dev
bb7dea1566
Fix missing SS define for D32 Pro
Fixes: https://github.com/espressif/arduino-esp32/issues/2153
2018-12-06 19:13:30 +01:00
Jeroen88
bff9f0b6b1 Fix error in PR #2048: if ::available() is called before ::connect() _rxBuffer is not initialised (#2155) 2018-12-06 19:01:06 +01:00
Martin
72803703fd Updated table of tested locations of Eduroam network (#2157) 2018-12-06 18:56:48 +01:00
Jeroen88
0596a2ac86 Abort update if http.begin() returns false. Fix a typo in httpUpdate.ino (#2156) 2018-12-06 18:50:53 +01:00
rdowning-triax
fe1fdd2790 #2147 available() shouldn't return 0 after disconnect if there is still data in the buffer. Otherwise, how would we know it was there? (#2148) 2018-12-04 18:23:34 +01:00