Commit Graph

132 Commits

Author SHA1 Message Date
Niek van der Maas
1db72a27c4 Added ESP32-CAM board (#2572) 2019-04-09 21:09:13 +02:00
tobozo
e28dce7eb7 Get Odroid-Go's PSRAM detected (#2564) 2019-04-09 21:07:53 +02:00
Roman Hosek
566f659e90 Frog Board ESP32 definition (#2515)
* Added board definition

Signed-off-by: Roman Hosek <roman.hosek@iotbakery.com>

* fix typo

* variant + pin definition
2019-03-03 15:53:49 +01:00
Aaron.Lee
84e458a9e1 Add Heltec boards defintion and update board menu chooices (#2475) 2019-03-03 15:47:47 +01:00
Me No Dev
628b8f0c29
Fix Olimex board definition 2019-02-18 12:56:59 +02:00
HanCheol Cho
8806acfbf9 Added partition menu for OROCA EduBot board. (#2429) 2019-02-14 13:08:28 +01:00
Stanimir-Petev
c1344ae094 New version of the ESP32-EVB/Gateway/PoE boards (#2397)
In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision.
In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
2019-02-14 13:03:34 +01:00
me-no-dev
b0582e1ec8 Fix compilation failing on Windows because of liblib.a 2019-01-10 09:23:25 +01:00
Me No Dev
fa61b3bffe
Update IDF to e931fe9 and add esp-face (#2291)
* Update IDF to e931fe9 and add esp-face

* Fix PIO builds fail because of sketch size

* Fix example build failing for Arduino
2019-01-09 19:31:46 +01:00
dragon-engineer
452c27a74a Added ESP32 FM DevKit - Fixed unused pins definitions. (#2288)
* Added ESP32 FM DevKit

* Added ESP32 FM DevKit variant

Fixed pin definitions for unused pins.
2019-01-09 16:50:41 +01:00
Me No Dev
2fd39b1aff
Handle APB frequency change (#2250)
* Add APB change callbacks and move cpu code to own file

* Properly set esp_timer and FreeRTOS tick dividers

* Improve updated devisors

* No need to update REF_TICK yet

* Add initial handling for UART baud change

* fix uartWriteBuf and uartDetectBaudrate

* trigger callbacks even when APB did not change

* toggle UART ISR on CPU change

* add XTAL freq getter and add cpu freq validation

* Support CPU frequency changes in I2C (#2287)

**esp32-hal-i2c.c**
* add callback for cpu frequency changes
* adjust fifo thresholds based on cpu frequency and i2c bus frequency
* reduce i2c bus frequency if differential is too small
**Wire.h**
* version to 1.1.0

* Implement clock change for the other peripherals

* remove bad CPU clock values from the menu

* Add note to CPU freqs that support WiFi and BT
2019-01-09 10:07:54 +01:00
HanCheol Cho
ff18a211e4 Add OROCA EduBot Board (#2264) 2019-01-06 21:47:55 +02:00
Me No Dev
c827bb4177
CPU and APB Frequency support (#2220)
* Add support to HAL for APB frequencies different than 80MHz

* Add support for CPU frequencies in the IDE board menu

* Switch to fast set_config

* Add method to uart so debug can be reassigned after apb frequency switch

* Return real APB frequency
2018-12-20 01:57:32 +01:00
Umut Erkal
512d0d088f Add Turta IoT Node Board (#2208) 2018-12-17 23:11:05 +01:00
Me No Dev
2db811f7f3
Update build tools (#2200) 2018-12-16 17:09:44 +01:00
atanisoft
a30005949a adding D-duino-32 board/pins (#2030)
* adding d-duino-32 board/pins, fixes #930

* remove OLED_RST
2018-11-19 19:29:57 +01:00
Stanimir-Petev
f9d1b24c01 Update (#1992)
Added Olimex board ESP32-PoE. pins_arduino header file based on the ESP32-EVB with changed SS pin and removed BOARD_HAS_1BIT_SDMMC macro.
2018-11-19 17:00:20 +01:00
Verkehrsrot
1fdc660641 [Feature] Boards added: Pycom LoPy & LoPy4 (#1984)
* Create pins_arduino.h

* Update boards.txt

Pycom LoPy + LoPy4 boards added

* Create pins_arduino.h

* Update pins_arduino.h

bugfix antenna switch GPIO port 16 -> 21

* Update pins_arduino.h

* Update pins_arduino.h

* Update pins_arduino.h

* Update pins_arduino.h

* Update pins_arduino.h

* Update boards.txt
2018-11-19 16:58:45 +01:00
Rop Gonggrijp
b70737d276 Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969) 2018-11-19 16:53:13 +01:00
lbernstone
7206b2f397 FAT on SPI Flash Library (#1809)
* First commit of FFat library

* Fixed reboot loops if no fat present. Added CMakeLists

* Functionalize the partition checks

* Cleanup, especially in format

* Dont format if mounted.  More wording cleanup

* 16M ffat should only be on 16M board

* Fix some casting issues that trip up the compiler when building as ESP-IDF component
2018-09-17 23:06:04 +02:00
yelvlab
3028ec42c7 Add BananaPi-BIT Development Board Support (#1810)
* Add BPI-BIT boards connfig

* Add BPI-BIT v1.3 boards
2018-09-17 22:32:14 +02:00
Patrick Van Oosterwijck
145904fb9c Add wESP32 support (#1821)
* Add wESP32 support

* Add default Ethernet config
2018-09-17 22:28:24 +02:00
lewis he
02ee799f35 Add T-Beam Board Support (#1852) 2018-09-17 21:19:02 +02:00
Jose Carlos Garcia Diaz
339618f8ef Updating Boart.txt ESP32Thing in PartitionScheme and DebugLevel (#1860) 2018-09-17 21:12:15 +02:00
WEMOS Electronics
3222e6490a add LOLIN D32 & D32 PRO Board support (#1688) 2018-07-28 10:27:26 +03:00
Bin
7761ebd9f2 Add M5Stack-FIRE board (#1647)
* Add M5Stack-FIRE board

* updated m5stack-fire boards.txt

* remove pins 16 and 17
2018-07-25 12:56:04 +02:00
Ron M. Battle
da798c7db0 Add TTGO LoRa32 with OLED Version 1.x Board (#1663)
* Add ttgo-lora32-v1 folder to variants folder

* Add ttgo-lora32-v1 info to boards.txt

* Add defs to pins_arduino.h for I2C OLED and SPI LoRa radio pinouts as per @stickbreaker
2018-07-24 19:49:38 +02:00
Kryštof Černý
cbd4dc53a6 Add ALKS board variant (#1643)
* Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
brendanvanbreda
79010b6498 Add XinaBox CW02 to supported boards (#1620)
* Create pins_arduino.h

* Update boards.txt

* Update pins_arduino.h
2018-07-10 13:43:21 +02:00
me-no-dev
a835bb26c4 Add missing flag to fix psram issues
Thanks @igrr
2018-07-04 12:11:25 +02:00
me-no-dev
5e46c9bae6 Add Wrover Support and Option to enable SPIRAM 2018-07-03 23:03:50 +02:00
korstiaanS
3967beb4fb Added WiPy 3.0 board (#1572) 2018-07-02 18:23:06 +02:00
me-no-dev
058645264c Adjust RAM size and calculator 2018-06-27 21:01:31 +02:00
Seungchul Lee
8e4ebf49de Add "ODROID ESP32" boards support (#1506) 2018-06-18 18:16:11 +03:00
reaper7
e7338998d2 Selectable (from menu) partitions for MH ET LIVE boards (#1430)
* Additional partition scheme min_spiffs
with minimal SPIFFS partition size and OTA support for bigger apps

* Selectable (from menu) partitions for m5stack

addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379)

discourse here: https://github.com/espressif/arduino-esp32/issues/1378

* Selectable (from menu) partitions for MH ET LIVE boards
in reference to other boards (m5stack, lolin32)
this PR adds partition scheme selection for MH ET LIVE boards
also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
per1234
25678f47aa Convert - to _ in build.board names (#1341)
build.board is used to define a macro but - is not a permitted character in macro names. This causes the macro name to actually be only everything up to the first - and also many warnings when compiling for one of these boards:

<command-line>:0:14: warning: ISO C++11 requires whitespace after the macro name

<command-line>:0:14: warning: ISO C99 requires whitespace after the macro name

I have followed the convention of the other build.board names by replacing - with _.
2018-05-14 13:09:25 +02:00
Dominik Szymański
f8a3c61981 Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379) 2018-05-14 13:03:46 +02:00
reaper7
6f12b691cf Selectable (from menu) partitions for m5stack (#1382)
* Additional partition scheme min_spiffs
with minimal SPIFFS partition size and OTA support for bigger apps

* Selectable (from menu) partitions for m5stack

addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379)

discourse here: https://github.com/espressif/arduino-esp32/issues/1378
2018-05-14 13:03:21 +02:00
nickoloss
1da3138ed6 Corrected Flash Mode (#1205)
Changed Flashmode to DIO due board only supports DIO
2018-04-14 09:48:10 +02:00
reaper7
4da5d46ecd Additional partition scheme min_spiffs (#1302)
with minimal SPIFFS partition size and OTA support for bigger apps
2018-04-14 09:45:08 +02:00
Me No Dev
69f72eca84
Update IDF to f586f5e (#1296)
* Update BLE lib

* Update IDF to f586f5e

* Restructure Bluetooth Serial includes

* Update esptool and gen_esp32part

* Add partition scheme selection for menuconfig

* Add partition scheme selection for Arduino IDE

* Fix BLE example

* Second attempt BLE fix

* Add exceptions to PIO
2018-04-07 09:45:18 +03:00
chuck todd
7eb6fc5286 Add Core Debug Level for WeMosBat (#1222)
Should we add this declaration option for all boards?
2018-04-06 19:09:19 +03:00
reaper7
5abe49e8eb currently, when M5Stack board is selected (#1242)
M5Stack variant (pins_arduino.h) file is not automatically included,
because boards.txt m5stack-core-esp32.build.variant=esp32
This commit changes m5stack-core-esp32.build.variant from esp32 to m5stack_core_esp32
also rename M5Stack variant directory from m5stack-core-esp32 to m5stack_core_esp32
2018-04-06 19:04:12 +03:00
M5Stack
e9ee0ab7df Fixed M5Stack build.board name (#1187) 2018-03-09 11:15:44 +01:00
Erik Wilson
f5c2afff31 fix upload.maximum_size as current partition size 0x140000 for esp32vn-iot-uno & heltec boards (#1052) 2018-03-04 20:29:49 +01:00
me-no-dev
d29cfdb104 Add Pico Kit board configuration 2018-02-27 10:14:58 +01:00
me-no-dev
a53d41f1c1 Fix bootloaders for different flash configs
fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
Jochen Groppe
21026e2373 fix NodeMCU-32S .build.board property (#812)
The .build.board=xx proptery is used for generating a macro named "ARDUINO_xxx".

C macro names should never have a "-" sign.

* current: ARDUINO_NodeMCU-32S
* should be: ARDUINO_=NodeMCU_32S
2017-11-06 15:24:00 +02:00
Michael Ammann
a276ae0bf3 adjust partitions for 2MB (#780)
use minimal partitions
2017-10-30 10:29:10 +01:00
Michael Ammann
0768590332 Add new target u-blox nina-w10 (#771)
* Update boards.txt

* Create pins_arduino.h
2017-10-25 12:11:01 +02:00
张雷
0bce98e72c add Microduino-esp32 (#621) 2017-09-11 17:47:28 +03:00
markheloking
bb078ca943 Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620)
* Create new pocket_32 diretory for Pocket 32 board

* Create pins_arduino.h for pocket_32

* Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 23:34:31 +03:00
reaper7
adff0716f9 add mhetesp32devkit and mhetesp32minikit boards (#587)
* add mhetesp32devkit and mhetesp32minikit

* add mhetesp32 variants
2017-08-20 10:49:06 +03:00
Alwin Arrasyid
4649db5e07 Add ESPectro32 board definition (#586)
* Add board definition for espectro32

* Fix ESPectro32 board definition
2017-08-20 07:24:47 +03:00
me-no-dev
856823ef19 Add support for 2MB flash and future option for different partition schemes 2017-08-17 20:00:22 +03:00
SDpower
be34c9e498 Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584) 2017-08-17 19:24:27 +03:00
M5Stack
1b3e8fa2cf Add "M5Stack-Core-ESP32" boards support 2017-08-17 16:16:57 +03:00
me-no-dev
0accabcee0 Fix some compilation errors 2017-08-01 12:08:38 +03:00
me-no-dev
ca7f6cc516 Update IDF libs to 9314bf0 2017-08-01 08:51:04 +03:00
Narongrat Srimee
b34d18f576 Add ThaiEasyElec's ESPino32 (#506)
* Create new espino32 diretory for ESPino32 board

* Delete wrong create file

* Create pins_arduino.h for espino32

* Update boards.txt to support ThaiEasyElec ESPino32

* Re-configure board name
2017-07-31 22:53:33 +03:00
Stefan Mavrodiev
9d0ae7a6be Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480) 2017-07-03 18:32:12 +02:00
Daniel Bovensiepen
6af648e8f5 Add DOIT ESP32 DEVKIT V1 board (#415) 2017-06-14 10:18:33 +02:00
Tuan PM
fb595e5751 add esp32vn-iot-uno board (#398)
Update boards files
2017-06-02 17:43:09 +02:00
me-no-dev
dcdf8132d6 Increase partition size to 1.25MB so BT and WiFi can fit
Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 13:13:44 +03:00
Max
c64796c7d2 Add NodeMCU-32S board (#375)
Board from AI-Thinker
2017-05-12 18:01:50 +02:00
MangoGeek
7b63f58683 add support for widora-air board (#367)
* add support for widora-air board

* change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
Limor "Ladyada" Fried
e960bb64f0 feather variant (#364) 2017-05-08 23:06:30 +03:00
WEMOS Electronics
3b86e0c0bc Update LED_BUILTIN pin for LOLIN32 (#362)
* Add ESP.getChipId() function to get ESP32's ChipID.

* change getChipId() to getEfuseMac()

* * Change board:Lolin32 to LOLIN32
* Update LED_BUILTIN pin for LOLIN32
2017-05-08 12:47:37 +03:00
Martin Sloup
32c028a27e #334: Update boards.txt for Onehorse's ESP32 Dev Module (#337) 2017-04-28 13:29:04 +03:00
robin
ba1efb9897 1. add IntoRobot Fig support (#284) 2017-03-31 00:02:45 +02:00
ouki
8289f34bf9 add DFRobot FireBeetle-ESP32 support (#239)
* add DFRobot FireBeetle-ESP32 support

* add variant for fireBeetle-ESP32

* The name of the env variant is changed to firebeetle32
2017-03-05 10:30:12 +02:00
Me No Dev
d02c1c786e Update IDF, fix SS definition, add custom partitions and debug level selection (#174)
* Add build time partitions compilation

* Fix wrong definition of SS pin

* Add support for core debug level selection

* update idf libs
2017-02-06 15:17:11 +02:00
Sandeep Patil
365a0d8592 created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131)
* created board defination and pin layout for hornbill dev and minima

* change in pin mapping
2017-01-16 12:14:04 +02:00
me-no-dev
b82d0e166a latest IDF, 240MHz and BLE enabled libs 2016-11-28 01:11:36 +02:00
lamloei
dbf030fdaa Add Node32s to boards.txt (#63) 2016-11-21 21:15:39 +02:00
MaiKe Labs
ff9d1fb05c Add "Noduino Quantum" board (#49)
* Add "Noduino Quantum" board

* change the value of build.board from Quantum to QUANTUM
2016-11-13 17:35:26 +02:00
volca
d1b94df9a9 Add board ESPea32 (#36)
* Add from original Arduino.h

* Add board "ESPea32"

* cleanup

* cleanup

* Change SS to 5
2016-11-11 19:06:13 +02:00
WEMOS Electronics
6cc5a9f05b Add "WEMOS LoLin32" boards support. (#35) 2016-11-08 10:54:56 +02:00
Nat Weerawan
886d0044bc Add Nano32 board. (#21) 2016-10-19 12:28:05 +03:00
Electronic Sweet Peas
bd1dcb82ca First addition of ESP320 support (#19)
* First addition of ESP320 support

* Updated maximum data size.
2016-10-17 17:53:13 +03:00
me-no-dev
0ccde6cc1a fix reported data size and percentage 2016-10-17 15:31:51 +03:00
me-no-dev
5f3a205955 initial import 2016-10-06 07:09:44 -06:00