Commit Graph

840 Commits

Author SHA1 Message Date
me-no-dev
5e46c9bae6 Add Wrover Support and Option to enable SPIRAM 2018-07-03 23:03:50 +02:00
me-no-dev
659c8ad528 Fix TelnetToSerial sketch 2018-07-03 21:51:24 +02:00
me-no-dev
2fe965259a "fix" SPI 2018-07-03 21:23:04 +02:00
Karan Sharma
0161e28614 Added OTAWebUpdater Doc (#1583) 2018-07-03 20:43:18 +02:00
me-no-dev
4e5cbdaa7f Add declarations for all Serial, SPI and Wire buses 2018-07-03 20:41:03 +02:00
chemicstry
12ca9e8b52 Port UART reset fix from ESP-IDF (#1408) 2018-07-03 17:54:08 +02:00
me-no-dev
8b01b9e187 Change esptool version notation 2018-07-03 14:50:14 +02:00
lbernstone
c4c946a83d Broke HTTP_Method out into a separate library for reuse in ESPAsyncWebServer (#1562) 2018-07-02 18:24:08 +02:00
korstiaanS
3967beb4fb Added WiPy 3.0 board (#1572) 2018-07-02 18:23:06 +02:00
chuck todd
6411ac4e3c Remove confusing Debug output. (#1574)
If Core Debug Level is at DEBUG, a confusing debug message will be emitted if the I2C transaction takes longer complete than the  calculated minimum time.  This original debug message was just to prove that this new i2c code could correctly handle SCL stretching or interrupt latency issues. This delay is not a problem, or an error.  Usually it is caused by a higher priory interrupt starving the i2c ISR.  Usually WiFi is the culprit.  As long of this delay is within the configured timeout (by default 50ms, or can be set with Wire.setTimeOut(milliseconds);) no problem will occur and the transaction will successfully complete.
Chuck.
2018-07-02 18:22:05 +02:00
Me No Dev
184bb069f2
Fix io16 io17 and PSRAM support (#1564)
* Add PSRAM init and malloc funtions

* Rebuild IDF libs
2018-06-30 23:06:50 +02:00
pacucha42
b855eb23a7 * arduino-esp32 release mgmt. update (#1557) 2018-06-29 00:54:26 +02:00
Me No Dev
eb4e891344
Update build.sh 2018-06-28 23:45:52 +02:00
Karan Sharma
47421b869f Added OTAWebupdated (#1544)
* added OTAWebUpdater

* added OTAWebUpdater

* Updated OTAWebUpdater
2018-06-28 21:19:22 +02:00
Me No Dev
a8ccbd40a4
Update esptool to be compatible with the packager (#1554) 2018-06-28 21:07:59 +02:00
pacucha42
58bdebc565 * release deployment comprehensive update (#1548) 2018-06-28 13:58:01 +02:00
Gottfried Haider
ed953a0d2e BluetoothSerial: check return value and return number of bytes written (#1538) 2018-06-27 23:00:31 +02:00
me-no-dev
93566a4fad fix PR tests 2018-06-27 22:21:13 +02:00
me-no-dev
873876d94c Fix peek, read and available logic in WiFiClientSecure 2018-06-27 22:09:21 +02:00
me-no-dev
058645264c Adjust RAM size and calculator 2018-06-27 21:01:31 +02:00
lbernstone
cde668dada ArduinoOTA endless loop (#1533)
* Changed pinmap to show pins34-39 as GPI

* ArduinoOTA could have endless loop b/c udp.read can return negative result
2018-06-27 09:06:02 +02:00
Me No Dev
a59eafbc9d
Update IDF to aaf1239 (#1539)
* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* Initial add of @stickbreaker i2c

* Add log_n

* fix warnings when log is off

* i2c code clean up and reorganization

* add flags to interrupt allocator

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* fix errors with latest IDF

* fix debug optimization (#1365)

incorrect optimization for debugging tick markers.

* Fix some missing BT header

* Change BTSerial log calls

* Update BLE lib

* Arduino-ESP32 release management scripted (#1515)

* Calculate an absolute path for a custom partitions table (#1452)

* * Arduino-ESP32 release management scripted
(ready-to-merge)

* * secure env for espressif/arduino-esp32

* * build tests enabled
* gitter webhook enabled

* * gitter room link fixed
* better comment

* * filepaths fixed

* BT Serial adjustments

* * don't run sketch builds & tests for tagged builds

* Return false from WiFi.hostByName() if hostname is not resolved

* Free BT Memory when BT is not used

* WIFI_MODE_NULL is not supported anymore

* Select some key examples to build with PlatformIO to save some time

* Update BLE lib

* Fixed BLE lib

* Major WiFi overhaul

- auto reconnect on connection loss now works
- moved to event groups
- some code clean up and procedure optimizations
- new methods to get a more elaborate system ststus

* Add cmake tests to travis

* Add initial AsyncUDP

* Add NetBIOS lib and fix CMake includes

* Add Initial WebServer

* Fix WebServer and examples

* travis not quiting on build fail

* Try different travis build

* Update IDF to aaf1239

* Fix WPS Example

* fix script permission and add some fail tests to sketch builder

* Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
Angus Gratton
7abd5862ed Add component CMakeLists.txt file for use with CMake-based build system (#1508)
Includes verification script (for Travis) that CMakeLists.txt contents match
repo & submodule source files
2018-06-24 14:59:16 +02:00
lbernstone
c7b38008e2 Changed pinmap to show pins34-39 as GPI (#1510) 2018-06-19 11:34:05 +03:00
lbernstone
36c8020cbc Added WiFi.disconnect to ESPNow examples. Fixes https://github.com/espressif/arduino-esp32/issues/1425 (#1511) 2018-06-19 11:33:50 +03:00
lbernstone
33392af315 Missing include gpio.h in esp32-hal-dac.h (#1512) 2018-06-19 11:33:17 +03:00
Alan
d06fa8ee70 Make scanNetworks return int16 (#1496) (#1514) 2018-06-19 11:32:12 +03:00
timkoers
c63d746a06 Added SPI bus pins (#1454)
Added SPI bus pins and tested them as well
2018-06-18 18:26:22 +03:00
horihiro
83810fa156 add support for TXT records in mDNS query responses (#1480)
* add methods for getting TXTs.

* add methods for getting TXTs.
2018-06-18 18:18:50 +03:00
Seungchul Lee
8e4ebf49de Add "ODROID ESP32" boards support (#1506) 2018-06-18 18:16:11 +03:00
Ivan Kravets
89859f7f4c Calculate an absolute path for a custom partitions table (#1452) 2018-05-31 19:19:10 +02:00
me-no-dev
a7b627cd78 Update espota.exe 2018-05-31 15:36:09 +02:00
Sathishkumar T
7b243adcfd [OTA] Add UserSelectable timeout for invitation to device + check for OK result in the last few messages (#1445) 2018-05-31 15:29:53 +02:00
me-no-dev
03808e3b8b Remove xtensa headers and adjust includes 2018-05-31 15:13:16 +02:00
Renhe Li
40d85ce582 Add submodule of Azure IoT library (#1448)
* Add submodule of Azure IoT library

* update the submodule of AzureIoT
2018-05-31 14:52:02 +02:00
Me No Dev
900e0a0257
Update commented pins in SPI Multi example
Update commented pins so people do not get confused and try to use them
2018-05-28 13:44:49 +02:00
Ivan Kravets
9570b77abd Custom Partition Tables for @PlatformIO (#1440) 2018-05-26 07:49:22 +02:00
reaper7
e7338998d2 Selectable (from menu) partitions for MH ET LIVE boards (#1430)
* Additional partition scheme min_spiffs
with minimal SPIFFS partition size and OTA support for bigger apps

* Selectable (from menu) partitions for m5stack

addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379)

discourse here: https://github.com/espressif/arduino-esp32/issues/1378

* Selectable (from menu) partitions for MH ET LIVE boards
in reference to other boards (m5stack, lolin32)
this PR adds partition scheme selection for MH ET LIVE boards
also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
timkoers
7aa8fc4b26 Added IIC pins (#1436)
Added IIC pins. I can confirm that this is working!
2018-05-25 16:28:26 +02:00
lbernstone
4ad27b4adc Added link to compilation issues for arduino as esp-idf component (#1435) 2018-05-25 16:27:50 +02:00
sticilface
c24a3404c6 Add SYSTEM_EVENT_WIFI_READY call back + WiFiMode fixes (#1322)
* Add `SYSTEM_EVENT_WIFI_READY` call back once wifi service is init.  allows you to hook in, as the sdk does not generate this event for you.
As it stands the SDK does not appear to set `WIFI_MODE_NULL` correctly.  if the wifi is initialised and set to `WIFI_MODE_NULL` it actually defaults to AP mode.  This fix keeps `WIFI_MODE_NULL` within the ESP class if the wifi has not been init yet, and works in my testing.  albeit a one sided conversation.
https://github.com/espressif/arduino-esp32/issues/1306

* make changes compatible with new _persistent behaviour.
2018-05-23 10:53:01 +02:00
Ivan Grokhotkov
93c45af256 Use esp_timer_get_time as time source for micros and mills (#1424)
esp_timer_get_time returns monotonic time in microseconds, as a 64-bit
number. It can be called from tasks and interrupts, does not use any
critical sections/mutexes, and is thread safe.
2018-05-22 16:12:30 +02:00
mmone
dd639c4a02 Fix wrong range of duty cycle (#1353)
The esp-idf expects duty values for the the sigma delta modulator in the range of -128 to 127
The arduino framework is supposed to use the range 0-255 thus the offset caclulation was wrong.
2018-05-14 13:18:03 +02:00
Ramesh
f14de5cf14 WiFi disconnect reason message updated (#1323)
wifi_err_reason_t doesn't have reason code 12. After reason code 11, we are getting wrong wifi disconnected reason message. Added "UNSPECIFIED"  in place of reason code 12.
And above 201 reason code, it should be r-176 instead of r-177. Because messages are started from zeroth offset.
2018-05-14 13:12:04 +02:00
Giuseppe
848cf98ba9 Update ExternalWakeUp.ino (#1332) 2018-05-14 13:09:51 +02:00
per1234
25678f47aa Convert - to _ in build.board names (#1341)
build.board is used to define a macro but - is not a permitted character in macro names. This causes the macro name to actually be only everything up to the first - and also many warnings when compiling for one of these boards:

<command-line>:0:14: warning: ISO C++11 requires whitespace after the macro name

<command-line>:0:14: warning: ISO C99 requires whitespace after the macro name

I have followed the convention of the other build.board names by replacing - with _.
2018-05-14 13:09:25 +02:00
BuzzRage
f5246cf4c1 Adding a getClockDivider function (#1355)
* Adding getClockDivider function

* indentation correction
2018-05-14 13:08:27 +02:00
Tim P
6bf7619ccc std::functioanl for WFIF event + Minor fix (#1366)
* add missing bits from esp8266 to help porting other libs

* Clean Up of Wifi event

* Exampl of Wifi Events
2018-05-14 13:05:49 +02:00
Marcel Stör
7bf1f47c97 Add note about sketch book location (#1374) 2018-05-14 13:04:44 +02:00
Dominik Szymański
f8a3c61981 Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379) 2018-05-14 13:03:46 +02:00