jacob.eva/arduino-esp32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
181 Commits 1 Branch 0 Tags 668 MiB
67128fcb2c
Commit Graph

181 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
me-no-dev
6edf8a7795 fix renamed method names for SigmaDelta 2017-01-09 21:55:37 +02:00
me-no-dev
a4305284d0 LEDC Driver Update 
- Add double precision to LEDC frequency
- Add method for writing frequencies (Tones)
- Add method for writing notes (8 channels polyphony anyone?)
 2017-01-09 18:05:30 +02:00
me-no-dev
8e948096d4 Rename sd->sigmadelta in HAL 
Change is to not be mistaken with SD Card
 2017-01-09 17:57:17 +02:00
me-no-dev
5977877dbe Update Kconfig to autoenable SO_RCVBUF in IDF 2017-01-09 17:51:07 +02:00
me-no-dev
7cef2e2954 Add initial IPv6 Support 2017-01-06 00:54:50 +02:00
Me No Dev
22f0577339 Update README.md 
Add exception decoder and fix layout
 2017-01-05 17:59:20 +02:00
tobozo
b5858c1904 Error Handling for Window10 without CygWin (#117) 
Added an Exception handling to the offending urlretrieve() call for the issue #108 https://github.com/espressif/arduino-esp32/issues/108

It's not really a fix but the failure message is much more elegant than the initial stack trace as it hints at the solution to the setup problem rather than confusing the user into Windows problems.
 2017-01-05 15:02:56 +02:00
me-no-dev
8b96b1a5f4 update IDF libs and esptool.py 
adds autoreset after firmware upload
 2017-01-05 13:54:40 +02:00
Me No Dev
d84d912973 Remove MONITOR_BAUD config 
it's part of esp-idf now and can be used by any project
 2017-01-03 11:55:51 +02:00
Me No Dev
9be672fdd8 Remove monitor command from component 
```make monitor``` has been now added to esp-idf by @projectgus and can be used from any esp-idf project
 2017-01-03 11:52:35 +02:00
me-no-dev
f49ac391b2 replace wrong calls to cbuf->size in UDP 2017-01-02 09:46:13 +02:00
Me No Dev
4395efa3fc Update README.md 2016-12-30 03:00:57 +02:00
me-no-dev
e383a11291 Add Server and UDP and fix WiFi.hostByName 2016-12-30 02:44:45 +02:00
me-no-dev
f6d4843680 Update IDF and Fix Error 88 for Client::available 2016-12-30 01:28:30 +02:00
me-no-dev
668c3811b8 Wire: wait while bus is busy if ack failed 2016-12-15 01:41:54 +02:00
me-no-dev
b86fb30b1d cleanup read commands 2016-12-14 23:31:28 +02:00
me-no-dev
04e0902ca6 Wire: if we are reading only one byte, do not send empty read command 2016-12-14 18:43:32 +02:00
me-no-dev
917a4fd6f0 allow setting internal pull resistors for any mode and enable them for I2C 2016-12-14 13:11:10 +02:00
me-no-dev
c19fc061b0 Hopefully fix I2C/Wire 
Tested with (all at the same time):
- MPU9250
- HTU21
- TMP102
- BMP180
- AM2320
- SSD1306
 2016-12-14 02:41:22 +02:00
me-no-dev
e92634a92b Add analogSetAttenuation and analogSetPinAttenuation 2016-12-14 02:29:54 +02:00
Me No Dev
7defc6ebf3 Update README.md 2016-12-13 13:45:58 +02:00
Murat Ambarkutuk
551e422423 Fix typos (#95) 2016-12-13 12:34:02 +02:00
The Gitter Badger
c336989e93 Add Gitter badge (#96) 2016-12-13 12:12:44 +02:00
me-no-dev
a6c02bc710 Add some missing defines 
fixes: https://github.com/espressif/arduino-esp32/issues/76
fixes: https://github.com/espressif/arduino-esp32/issues/5
fixes: https://github.com/espressif/arduino-esp32/issues/91
 2016-12-12 02:12:18 +02:00
Victor Tseng
54b1b8b1d3 const correctness (#89) 
make IPAddress.toString() const method, it doesn't modify anything
within the class.
 2016-12-12 01:32:55 +02:00
Ivan Kravets
d8e74f2cbf Format README contents; add instructions for @PlatformIO (#88) 2016-12-10 18:28:24 +02:00
me-no-dev
8e7d00b9a8 i2c revert to old fifo write 2016-12-09 18:07:59 +02:00
me-no-dev
4e458fd6fb Initial Timers driver 
Implementation for Timers 0-4 (no locks yet)
 2016-12-09 17:47:30 +02:00
me-no-dev
f5d6828c5a Adjust interrupt numbers for GPIO and Touch 2016-12-09 13:22:56 +02:00
Me No Dev
d1025b6b5d Update esp32-hal-i2c.c 
wait for data to be latched and increase timeout in attempt to fix clock stretch issues
Connected issues:
http://esp32.com/viewtopic.php?f=19&t=632&p=2832#p2801
https://github.com/espressif/arduino-esp32/issues/81
https://github.com/espressif/arduino-esp32/issues/53
https://github.com/espressif/arduino-esp32/issues/11
 2016-12-09 12:51:36 +02:00
me-no-dev
35e54f2a59 Add definitions for ADC, Touch and DAC pins 2016-12-09 00:54:04 +02:00
Me No Dev
ddb2541f5e Update README.md 
Add instructions for using as IDF component
 2016-12-09 00:34:28 +02:00
me-no-dev
758553a786 Add analogRead, touchRead, dacWrite and updated esp-idf 2016-12-08 23:43:41 +02:00
me-no-dev
48abb79ed3 Remove autostart define overwrite 
Fixes issue where switch will not properly trigger if Arduino is used
in IDF as component.
See
https://github.com/espressif/arduino-esp32/issues/83#issuecomment-265326
071
 2016-12-07 11:06:33 +02:00
Me No Dev
13268b9d3c Update README.md 
- Link to Windows instructions
- Update instructions for Linux and Mac
 2016-12-07 00:46:43 +02:00
Me No Dev
42c1d5897b Update windows.md 
Fix formatting and numbering
 2016-12-06 21:26:47 +02:00
me-no-dev
ee4a8259e2 Add from-scratch Windows installation instructions 2016-12-06 21:09:23 +02:00
me-no-dev
ba04076f16 Move definitions to not conflict with C includes 2016-12-05 22:53:04 +02:00
me-no-dev
6dc34077c4 Add correct definitions for word 
fixes: https://github.com/espressif/arduino-esp32/issues/76
 2016-12-05 22:50:51 +02:00
me-no-dev
ee36407b43 Update IDF libs 2016-12-02 14:50:43 +02:00
me-no-dev
e77ec634a9 Fix deprecation warnings in ESP.cpp 2016-12-02 14:30:04 +02:00
me-no-dev
49f35ff070 use esp_random in WMath.cpp 2016-12-02 13:42:31 +02:00
me-no-dev
6db0ee1304 Optimize GPIO and account for micros overflow in delayMicroseconds 2016-12-02 13:03:51 +02:00
Hirotaka
3c81739b33 need close(sockfd) before sockfd = -1, "_connected = false and close socket" means stop() function. (#73) 2016-12-01 13:27:51 +02:00
me-no-dev
8904f52c39 Allow phy to be initialized only if WiFi/BLE is used/enabled 
fixes: https://github.com/espressif/arduino-esp32/issues/72
 2016-12-01 13:23:17 +02:00
Me No Dev
57c3650ea2 Disconnect WiFiClient on destruct 2016-11-29 03:27:01 +02:00
me-no-dev
b82d0e166a latest IDF, 240MHz and BLE enabled libs 2016-11-28 01:11:36 +02:00
me-no-dev
1d1aeecde2 simplify WiFi boot procedure to prepare for on-demand stack load 
currently ```esp_wifi_init``` have to be called in ```app_main``` or
WiFi will fail to boot. When possible to boot later, code will be moved
into ```_esp_wifi_start``` to be executed when necessary
 2016-11-28 00:50:21 +02:00
me-no-dev
f4c2135a30 RTC pins have pull up/down elsewhere 
use driver/gpio for now.

fixes: https://github.com/espressif/arduino-esp32/issues/66
 2016-11-26 12:04:36 +02:00
Me No Dev
be2a26b3ff set SCL to OUTPUT_OPEN_DRAIN 
fixes: https://github.com/espressif/arduino-esp32/issues/69
 2016-11-25 11:25:50 +02:00