jacob.eva/arduino-esp32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2fd3d042b2
arduino-esp32/boards.txt

5192 lines
207 KiB
Plaintext
Raw Normal View History

initial import
2016-10-06 13:21:30 +02:00
menu.UploadSpeed=Upload Speed
CPU and APB Frequency support (#2220) * Add support to HAL for APB frequencies different than 80MHz * Add support for CPU frequencies in the IDE board menu * Switch to fast set_config * Add method to uart so debug can be reassigned after apb frequency switch * Return real APB frequency
2018-12-20 01:57:32 +01:00
menu.CPUFreq=CPU Frequency
initial import
2016-10-06 13:21:30 +02:00
menu.FlashFreq=Flash Frequency
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
menu.FlashMode=Flash Mode
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
menu.FlashSize=Flash Size
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
menu.PartitionScheme=Partition Scheme
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
menu.DebugLevel=Core Debug Level
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
menu.PSRAM=PSRAM
New version of the ESP32-EVB/Gateway/PoE boards (#2397) In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision. In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
2019-02-14 13:03:34 +01:00
menu.Revision=Board Revision
initial import
2016-10-06 13:21:30 +02:00
##############################################################
Set ESP-IDF to 3.2 (#2662) * Set IDF to v3.2 * Remove BLE submodule * Add BLE lib source * Update Camera example to support OV3660
2019-04-12 15:43:53 +02:00
### DO NOT PUT BOARDS ABOVE THE OFFICIAL ESPRESSIF BOARDS! ###
Added ESP32-CAM board (#2572)
2019-04-09 21:09:13 +02:00
##############################################################
initial import
2016-10-06 13:21:30 +02:00
esp32.name=ESP32 Dev Module
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
esp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32.upload.maximum_data_size=327680
initial import
2016-10-06 13:21:30 +02:00
esp32.upload.wait_for_upload_port=true
esp32.serial.disableDTR=true
esp32.serial.disableRTS=true
esp32.build.mcu=esp32
esp32.build.core=esp32
esp32.build.variant=esp32
esp32.build.board=ESP32_DEV
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
esp32.build.f_cpu=240000000L
initial import
2016-10-06 13:21:30 +02:00
esp32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.build.flash_freq=40m
Fix some compilation errors
2017-08-01 11:08:38 +02:00
esp32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32.build.defines=
esp32.menu.PSRAM.disabled=Disabled
esp32.menu.PSRAM.disabled.build.defines=
esp32.menu.PSRAM.enabled=Enabled
Add missing flag to fix psram issues Thanks @igrr
2018-07-04 12:11:25 +02:00
esp32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
Also show how space is allocated for the default partitions (#2649) Make all the partitions descriptions consistent, they now all show what space allocation you get.
2019-04-11 16:47:15 +02:00
esp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
esp32.menu.PartitionScheme.default.build.partitions=default
Also show how space is allocated for the default partitions (#2649) Make all the partitions descriptions consistent, they now all show what space allocation you get.
2019-04-11 16:47:15 +02:00
esp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
Add support for ffat on 4MB ESP32 Dev Module and mhetesp32minikit board. (#2588) * Update boards.txt Add menu items for ffat on mhetesp32minikit board. * Add partition table. * Added ffat partition for 4MB ESP32 Dev Module. * Added comment about partitioning schemes.
2019-04-09 21:11:17 +02:00
esp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
Update boards.txt (#2933) * Update boards.txt Adding ESP32-WROOM-32 8MB flash option * Update boards.txt Fixing partition size and typo * Update boards.txt
2019-07-10 08:13:09 +02:00
esp32.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
esp32.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
Fix wrong values in .cvs files (#3196) * Fix wrong values in .cvs files Add missing upload size for partitions bigger than default one * Add new partion to generic Fix hardcoded partition for 16M flash
2019-09-10 21:52:51 +02:00
esp32.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
Added 2 ffat partition schemes for 4MB modules + improved descriptions. (#2623) * Added 2 ffat partition schemes for 4MB modules + improved descriptions. Existing format options were unclear on how much spiffs you were getting. Also add missing 1MB App/3MB Spiffs split. This addresses https://github.com/espressif/arduino-esp32/issues/1799 This makes it very clear what each option gives you, and also adds 2 options to get ffat on 4MB chips.. * Added link to ffat howto.
2019-04-10 02:34:31 +02:00
esp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
esp32.menu.PartitionScheme.minimal.build.partitions=minimal
Added 2 ffat partition schemes for 4MB modules + improved descriptions. (#2623) * Added 2 ffat partition schemes for 4MB modules + improved descriptions. Existing format options were unclear on how much spiffs you were getting. Also add missing 1MB App/3MB Spiffs split. This addresses https://github.com/espressif/arduino-esp32/issues/1799 This makes it very clear what each option gives you, and also adds 2 options to get ffat on 4MB chips.. * Added link to ffat howto.
2019-04-10 02:34:31 +02:00
esp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379)
2018-05-14 13:03:46 +02:00
esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
Added 2 ffat partition schemes for 4MB modules + improved descriptions. (#2623) * Added 2 ffat partition schemes for 4MB modules + improved descriptions. Existing format options were unclear on how much spiffs you were getting. Also add missing 1MB App/3MB Spiffs split. This addresses https://github.com/espressif/arduino-esp32/issues/1799 This makes it very clear what each option gives you, and also adds 2 options to get ffat on 4MB chips.. * Added link to ffat howto.
2019-04-10 02:34:31 +02:00
esp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
esp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
esp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
esp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
esp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
esp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
esp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
esp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
esp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
esp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
Update IDF to e931fe9 and add esp-face (#2291) * Update IDF to e931fe9 and add esp-face * Fix PIO builds fail because of sketch size * Fix example build failing for Arduino
2019-01-09 19:31:46 +01:00
esp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
esp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
Added 2 ffat partition schemes for 4MB modules + improved descriptions. (#2623) * Added 2 ffat partition schemes for 4MB modules + improved descriptions. Existing format options were unclear on how much spiffs you were getting. Also add missing 1MB App/3MB Spiffs split. This addresses https://github.com/espressif/arduino-esp32/issues/1799 This makes it very clear what each option gives you, and also adds 2 options to get ffat on 4MB chips.. * Added link to ffat howto.
2019-04-10 02:34:31 +02:00
esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
Additional partition scheme min_spiffs (#1302) with minimal SPIFFS partition size and OTA support for bigger apps
2018-04-14 09:45:08 +02:00
esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379)
2018-05-14 13:03:46 +02:00
esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Added 2 ffat partition schemes for 4MB modules + improved descriptions. (#2623) * Added 2 ffat partition schemes for 4MB modules + improved descriptions. Existing format options were unclear on how much spiffs you were getting. Also add missing 1MB App/3MB Spiffs split. This addresses https://github.com/espressif/arduino-esp32/issues/1799 This makes it very clear what each option gives you, and also adds 2 options to get ffat on 4MB chips.. * Added link to ffat howto.
2019-04-10 02:34:31 +02:00
esp32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
FAT on SPI Flash Library (#1809) * First commit of FFat library * Fixed reboot loops if no fat present. Added CMakeLists * Functionalize the partition checks * Cleanup, especially in format * Dont format if mounted. More wording cleanup * 16M ffat should only be on 16M board * Fix some casting issues that trip up the compiler when building as ESP-IDF component
2018-09-17 23:06:04 +02:00
esp32.menu.PartitionScheme.fatflash.build.partitions=ffat
Fix wrong values in .cvs files (#3196) * Fix wrong values in .cvs files Add missing upload size for partitions bigger than default one * Add new partion to generic Fix hardcoded partition for 16M flash
2019-09-10 21:52:51 +02:00
esp32.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
esp32.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
esp32.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
esp32.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
Update IDF to f586f5e (#1296) * Update BLE lib * Update IDF to f586f5e * Restructure Bluetooth Serial includes * Update esptool and gen_esp32part * Add partition scheme selection for menuconfig * Add partition scheme selection for Arduino IDE * Fix BLE example * Second attempt BLE fix * Add exceptions to PIO
2018-04-07 08:45:18 +02:00
Handle APB frequency change (#2250) * Add APB change callbacks and move cpu code to own file * Properly set esp_timer and FreeRTOS tick dividers * Improve updated devisors * No need to update REF_TICK yet * Add initial handling for UART baud change * fix uartWriteBuf and uartDetectBaudrate * trigger callbacks even when APB did not change * toggle UART ISR on CPU change * add XTAL freq getter and add cpu freq validation * Support CPU frequency changes in I2C (#2287) **esp32-hal-i2c.c** * add callback for cpu frequency changes * adjust fifo thresholds based on cpu frequency and i2c bus frequency * reduce i2c bus frequency if differential is too small **Wire.h** * version to 1.1.0 * Implement clock change for the other peripherals * remove bad CPU clock values from the menu * Add note to CPU freqs that support WiFi and BT
2019-01-09 10:07:54 +01:00
esp32.menu.CPUFreq.240=240MHz (WiFi/BT)
CPU and APB Frequency support (#2220) * Add support to HAL for APB frequencies different than 80MHz * Add support for CPU frequencies in the IDE board menu * Switch to fast set_config * Add method to uart so debug can be reassigned after apb frequency switch * Return real APB frequency
2018-12-20 01:57:32 +01:00
esp32.menu.CPUFreq.240.build.f_cpu=240000000L
Handle APB frequency change (#2250) * Add APB change callbacks and move cpu code to own file * Properly set esp_timer and FreeRTOS tick dividers * Improve updated devisors * No need to update REF_TICK yet * Add initial handling for UART baud change * fix uartWriteBuf and uartDetectBaudrate * trigger callbacks even when APB did not change * toggle UART ISR on CPU change * add XTAL freq getter and add cpu freq validation * Support CPU frequency changes in I2C (#2287) **esp32-hal-i2c.c** * add callback for cpu frequency changes * adjust fifo thresholds based on cpu frequency and i2c bus frequency * reduce i2c bus frequency if differential is too small **Wire.h** * version to 1.1.0 * Implement clock change for the other peripherals * remove bad CPU clock values from the menu * Add note to CPU freqs that support WiFi and BT
2019-01-09 10:07:54 +01:00
esp32.menu.CPUFreq.160=160MHz (WiFi/BT)
CPU and APB Frequency support (#2220) * Add support to HAL for APB frequencies different than 80MHz * Add support for CPU frequencies in the IDE board menu * Switch to fast set_config * Add method to uart so debug can be reassigned after apb frequency switch * Return real APB frequency
2018-12-20 01:57:32 +01:00
esp32.menu.CPUFreq.160.build.f_cpu=160000000L
Handle APB frequency change (#2250) * Add APB change callbacks and move cpu code to own file * Properly set esp_timer and FreeRTOS tick dividers * Improve updated devisors * No need to update REF_TICK yet * Add initial handling for UART baud change * fix uartWriteBuf and uartDetectBaudrate * trigger callbacks even when APB did not change * toggle UART ISR on CPU change * add XTAL freq getter and add cpu freq validation * Support CPU frequency changes in I2C (#2287) **esp32-hal-i2c.c** * add callback for cpu frequency changes * adjust fifo thresholds based on cpu frequency and i2c bus frequency * reduce i2c bus frequency if differential is too small **Wire.h** * version to 1.1.0 * Implement clock change for the other peripherals * remove bad CPU clock values from the menu * Add note to CPU freqs that support WiFi and BT
2019-01-09 10:07:54 +01:00
esp32.menu.CPUFreq.80=80MHz (WiFi/BT)
CPU and APB Frequency support (#2220) * Add support to HAL for APB frequencies different than 80MHz * Add support for CPU frequencies in the IDE board menu * Switch to fast set_config * Add method to uart so debug can be reassigned after apb frequency switch * Return real APB frequency
2018-12-20 01:57:32 +01:00
esp32.menu.CPUFreq.80.build.f_cpu=80000000L
esp32.menu.CPUFreq.40=40MHz (40MHz XTAL)
esp32.menu.CPUFreq.40.build.f_cpu=40000000L
esp32.menu.CPUFreq.26=26MHz (26MHz XTAL)
esp32.menu.CPUFreq.26.build.f_cpu=26000000L
esp32.menu.CPUFreq.20=20MHz (40MHz XTAL)
esp32.menu.CPUFreq.20.build.f_cpu=20000000L
Handle APB frequency change (#2250) * Add APB change callbacks and move cpu code to own file * Properly set esp_timer and FreeRTOS tick dividers * Improve updated devisors * No need to update REF_TICK yet * Add initial handling for UART baud change * fix uartWriteBuf and uartDetectBaudrate * trigger callbacks even when APB did not change * toggle UART ISR on CPU change * add XTAL freq getter and add cpu freq validation * Support CPU frequency changes in I2C (#2287) **esp32-hal-i2c.c** * add callback for cpu frequency changes * adjust fifo thresholds based on cpu frequency and i2c bus frequency * reduce i2c bus frequency if differential is too small **Wire.h** * version to 1.1.0 * Implement clock change for the other peripherals * remove bad CPU clock values from the menu * Add note to CPU freqs that support WiFi and BT
2019-01-09 10:07:54 +01:00
esp32.menu.CPUFreq.13=13MHz (26MHz XTAL)
CPU and APB Frequency support (#2220) * Add support to HAL for APB frequencies different than 80MHz * Add support for CPU frequencies in the IDE board menu * Switch to fast set_config * Add method to uart so debug can be reassigned after apb frequency switch * Return real APB frequency
2018-12-20 01:57:32 +01:00
esp32.menu.CPUFreq.13.build.f_cpu=13000000L
esp32.menu.CPUFreq.10=10MHz (40MHz XTAL)
esp32.menu.CPUFreq.10.build.f_cpu=10000000L
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.qio=QIO
esp32.menu.FlashMode.qio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.qio.build.boot=qio
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.dio=DIO
esp32.menu.FlashMode.dio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.dio.build.boot=dio
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.qout=QOUT
esp32.menu.FlashMode.qout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.qout.build.boot=qout
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
esp32.menu.FlashMode.dout=DOUT
esp32.menu.FlashMode.dout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32.menu.FlashMode.dout.build.boot=dout
initial import
2016-10-06 13:21:30 +02:00
esp32.menu.FlashFreq.80=80MHz
esp32.menu.FlashFreq.80.build.flash_freq=80m
esp32.menu.FlashFreq.40=40MHz
esp32.menu.FlashFreq.40.build.flash_freq=40m
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32.menu.FlashSize.4M=4MB (32Mb)
esp32.menu.FlashSize.4M.build.flash_size=4MB
Update boards.txt (#2933) * Update boards.txt Adding ESP32-WROOM-32 8MB flash option * Update boards.txt Fixing partition size and typo * Update boards.txt
2019-07-10 08:13:09 +02:00
esp32.menu.FlashSize.8M=8MB (64Mb)
esp32.menu.FlashSize.8M.build.flash_size=8MB
esp32.menu.FlashSize.8M.build.partitions=default_8MB
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32.menu.FlashSize.2M=2MB (16Mb)
esp32.menu.FlashSize.2M.build.flash_size=2MB
esp32.menu.FlashSize.2M.build.partitions=minimal
FAT on SPI Flash Library (#1809) * First commit of FFat library * Fixed reboot loops if no fat present. Added CMakeLists * Functionalize the partition checks * Cleanup, especially in format * Dont format if mounted. More wording cleanup * 16M ffat should only be on 16M board * Fix some casting issues that trip up the compiler when building as ESP-IDF component
2018-09-17 23:06:04 +02:00
esp32.menu.FlashSize.16M=16MB (128Mb)
esp32.menu.FlashSize.16M.build.flash_size=16MB
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
initial import
2016-10-06 13:21:30 +02:00
esp32.menu.UploadSpeed.921600=921600
esp32.menu.UploadSpeed.921600.upload.speed=921600
esp32.menu.UploadSpeed.115200=115200
esp32.menu.UploadSpeed.115200.upload.speed=115200
esp32.menu.UploadSpeed.256000.windows=256000
esp32.menu.UploadSpeed.256000.upload.speed=256000
esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32.menu.UploadSpeed.230400=230400
esp32.menu.UploadSpeed.230400.upload.speed=230400
esp32.menu.UploadSpeed.460800.linux=460800
esp32.menu.UploadSpeed.460800.macosx=460800
esp32.menu.UploadSpeed.460800.upload.speed=460800
esp32.menu.UploadSpeed.512000.windows=512000
esp32.menu.UploadSpeed.512000.upload.speed=512000
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32.menu.DebugLevel.none=None
esp32.menu.DebugLevel.none.build.code_debug=0
esp32.menu.DebugLevel.error=Error
esp32.menu.DebugLevel.error.build.code_debug=1
esp32.menu.DebugLevel.warn=Warn
esp32.menu.DebugLevel.warn.build.code_debug=2
esp32.menu.DebugLevel.info=Info
esp32.menu.DebugLevel.info.build.code_debug=3
esp32.menu.DebugLevel.debug=Debug
esp32.menu.DebugLevel.debug.build.code_debug=4
esp32.menu.DebugLevel.verbose=Verbose
esp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.name=ESP32 Wrover Module
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32wrover.upload.tool=esptool_py
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.upload.maximum_size=1310720
esp32wrover.upload.maximum_data_size=327680
esp32wrover.upload.wait_for_upload_port=true
esp32wrover.serial.disableDTR=true
esp32wrover.serial.disableRTS=true
esp32wrover.build.mcu=esp32
esp32wrover.build.core=esp32
esp32wrover.build.variant=esp32
esp32wrover.build.board=ESP32_DEV
esp32wrover.build.f_cpu=240000000L
esp32wrover.build.flash_size=4MB
esp32wrover.build.flash_freq=40m
esp32wrover.build.flash_mode=dio
esp32wrover.build.boot=dio
esp32wrover.build.partitions=default
Add missing flag to fix psram issues Thanks @igrr
2018-07-04 12:11:25 +02:00
esp32wrover.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
Add config, menu partition Wrover (#3147) * add config, menu partition Wrover * fix all boards
2019-10-01 16:10:16 +02:00
esp32wrover.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.menu.PartitionScheme.default.build.partitions=default
Add config, menu partition Wrover (#3147) * add config, menu partition Wrover * fix all boards
2019-10-01 16:10:16 +02:00
esp32wrover.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
esp32wrover.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
esp32wrover.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
esp32wrover.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
esp32wrover.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.menu.PartitionScheme.minimal.build.partitions=minimal
Add config, menu partition Wrover (#3147) * add config, menu partition Wrover * fix all boards
2019-10-01 16:10:16 +02:00
esp32wrover.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32wrover.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
Add config, menu partition Wrover (#3147) * add config, menu partition Wrover * fix all boards
2019-10-01 16:10:16 +02:00
esp32wrover.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
esp32wrover.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
esp32wrover.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
esp32wrover.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
esp32wrover.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
esp32wrover.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
esp32wrover.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
esp32wrover.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
esp32wrover.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
esp32wrover.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
Fix compilation failing on Windows because of liblib.a
2019-01-10 09:23:25 +01:00
esp32wrover.menu.PartitionScheme.huge_app.build.partitions=huge_app
esp32wrover.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
Add config, menu partition Wrover (#3147) * add config, menu partition Wrover * fix all boards
2019-10-01 16:10:16 +02:00
esp32wrover.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32wrover.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add config, menu partition Wrover (#3147) * add config, menu partition Wrover * fix all boards
2019-10-01 16:10:16 +02:00
esp32wrover.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
esp32wrover.menu.PartitionScheme.fatflash.build.partitions=ffat
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32wrover.menu.FlashMode.qio=QIO
esp32wrover.menu.FlashMode.qio.build.flash_mode=dio
esp32wrover.menu.FlashMode.qio.build.boot=qio
esp32wrover.menu.FlashMode.dio=DIO
esp32wrover.menu.FlashMode.dio.build.flash_mode=dio
esp32wrover.menu.FlashMode.dio.build.boot=dio
esp32wrover.menu.FlashMode.qout=QOUT
esp32wrover.menu.FlashMode.qout.build.flash_mode=dout
esp32wrover.menu.FlashMode.qout.build.boot=qout
esp32wrover.menu.FlashMode.dout=DOUT
esp32wrover.menu.FlashMode.dout.build.flash_mode=dout
esp32wrover.menu.FlashMode.dout.build.boot=dout
esp32wrover.menu.FlashFreq.80=80MHz
esp32wrover.menu.FlashFreq.80.build.flash_freq=80m
esp32wrover.menu.FlashFreq.40=40MHz
esp32wrover.menu.FlashFreq.40.build.flash_freq=40m
esp32wrover.menu.UploadSpeed.921600=921600
esp32wrover.menu.UploadSpeed.921600.upload.speed=921600
esp32wrover.menu.UploadSpeed.115200=115200
esp32wrover.menu.UploadSpeed.115200.upload.speed=115200
esp32wrover.menu.UploadSpeed.256000.windows=256000
esp32wrover.menu.UploadSpeed.256000.upload.speed=256000
esp32wrover.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32wrover.menu.UploadSpeed.230400=230400
esp32wrover.menu.UploadSpeed.230400.upload.speed=230400
esp32wrover.menu.UploadSpeed.460800.linux=460800
esp32wrover.menu.UploadSpeed.460800.macosx=460800
esp32wrover.menu.UploadSpeed.460800.upload.speed=460800
esp32wrover.menu.UploadSpeed.512000.windows=512000
esp32wrover.menu.UploadSpeed.512000.upload.speed=512000
esp32wrover.menu.DebugLevel.none=None
esp32wrover.menu.DebugLevel.none.build.code_debug=0
esp32wrover.menu.DebugLevel.error=Error
esp32wrover.menu.DebugLevel.error.build.code_debug=1
esp32wrover.menu.DebugLevel.warn=Warn
esp32wrover.menu.DebugLevel.warn.build.code_debug=2
esp32wrover.menu.DebugLevel.info=Info
esp32wrover.menu.DebugLevel.info.build.code_debug=3
esp32wrover.menu.DebugLevel.debug=Debug
esp32wrover.menu.DebugLevel.debug.build.code_debug=4
esp32wrover.menu.DebugLevel.verbose=Verbose
esp32wrover.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.name=ESP32 Pico Kit
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
pico32.upload.tool=esptool_py
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
pico32.upload.maximum_data_size=327680
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.upload.wait_for_upload_port=true
pico32.serial.disableDTR=true
pico32.serial.disableRTS=true
pico32.build.mcu=esp32
pico32.build.core=esp32
pico32.build.variant=pico32
pico32.build.board=ESP32_PICO
pico32.build.f_cpu=240000000L
pico32.build.flash_size=4MB
pico32.build.flash_freq=80m
Corrected Flash Mode (#1205) Changed Flashmode to DIO due board only supports DIO
2018-04-14 09:48:10 +02:00
pico32.build.flash_mode=dio
pico32.build.boot=dio
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
pico32.build.defines=
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
Added partition size option for Pico Kit (#3258) The original boards.txt was missing a menu option to select the FLASH partitioning options.
2019-09-24 18:21:35 +02:00
pico32.menu.PartitionScheme.default=Default
pico32.menu.PartitionScheme.default.build.partitions=default
pico32.menu.PartitionScheme.no_ota=No OTA (Large APP)
pico32.menu.PartitionScheme.no_ota.build.partitions=no_ota
pico32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
pico32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
pico32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
pico32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add Pico Kit board configuration
2018-02-27 10:14:58 +01:00
pico32.menu.UploadSpeed.921600=921600
pico32.menu.UploadSpeed.921600.upload.speed=921600
pico32.menu.UploadSpeed.115200=115200
pico32.menu.UploadSpeed.115200.upload.speed=115200
pico32.menu.UploadSpeed.256000.windows=256000
pico32.menu.UploadSpeed.256000.upload.speed=256000
pico32.menu.UploadSpeed.230400.windows.upload.speed=256000
pico32.menu.UploadSpeed.230400=230400
pico32.menu.UploadSpeed.230400.upload.speed=230400
pico32.menu.UploadSpeed.460800.linux=460800
pico32.menu.UploadSpeed.460800.macosx=460800
pico32.menu.UploadSpeed.460800.upload.speed=460800
pico32.menu.UploadSpeed.512000.windows=512000
pico32.menu.UploadSpeed.512000.upload.speed=512000
pico32.menu.DebugLevel.none=None
pico32.menu.DebugLevel.none.build.code_debug=0
pico32.menu.DebugLevel.error=Error
pico32.menu.DebugLevel.error.build.code_debug=1
pico32.menu.DebugLevel.warn=Warn
pico32.menu.DebugLevel.warn.build.code_debug=2
pico32.menu.DebugLevel.info=Info
pico32.menu.DebugLevel.info.build.code_debug=3
pico32.menu.DebugLevel.debug=Debug
pico32.menu.DebugLevel.debug.build.code_debug=4
pico32.menu.DebugLevel.verbose=Verbose
pico32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Added support for TinyPICO in the boards list (#2901)
2019-07-09 18:40:34 +02:00
tinypico.name=TinyPICO
tinypico.upload.tool=esptool_py
tinypico.upload.maximum_size=1310720
tinypico.upload.maximum_data_size=327680
tinypico.upload.wait_for_upload_port=true
tinypico.serial.disableDTR=true
tinypico.serial.disableRTS=true
tinypico.build.mcu=esp32
tinypico.build.core=esp32
tinypico.build.variant=pico32
Fixed incorrect board name for TinyPICO - You can now use this to detect it's a TinyPICO at compile time.... (#3567) #ifdef ARDUINO_TINYPICO // It's a TinyPICO! #endif
2020-01-20 15:06:25 +01:00
tinypico.build.board=TINYPICO
Added support for TinyPICO in the boards list (#2901)
2019-07-09 18:40:34 +02:00
tinypico.build.f_cpu=240000000L
tinypico.build.flash_size=4MB
tinypico.build.flash_freq=80m
tinypico.build.flash_mode=dio
tinypico.build.boot=dio
tinypico.build.partitions=default
tinypico.build.defines=
Added partition size options for TinyPICO (#3358)
2019-10-15 00:32:41 +02:00
tinypico.menu.PartitionScheme.default=Default
tinypico.menu.PartitionScheme.default.build.partitions=default
tinypico.menu.PartitionScheme.no_ota=No OTA (Large APP)
tinypico.menu.PartitionScheme.no_ota.build.partitions=no_ota
tinypico.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
tinypico.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
tinypico.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
tinypico.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Added support for TinyPICO in the boards list (#2901)
2019-07-09 18:40:34 +02:00
tinypico.menu.UploadSpeed.921600=921600
tinypico.menu.UploadSpeed.921600.upload.speed=921600
tinypico.menu.UploadSpeed.115200=115200
tinypico.menu.UploadSpeed.115200.upload.speed=115200
tinypico.menu.UploadSpeed.256000.windows=256000
tinypico.menu.UploadSpeed.256000.upload.speed=256000
tinypico.menu.UploadSpeed.230400.windows.upload.speed=256000
tinypico.menu.UploadSpeed.230400=230400
tinypico.menu.UploadSpeed.230400.upload.speed=230400
tinypico.menu.UploadSpeed.460800.linux=460800
tinypico.menu.UploadSpeed.460800.macosx=460800
tinypico.menu.UploadSpeed.460800.upload.speed=460800
tinypico.menu.UploadSpeed.512000.windows=512000
tinypico.menu.UploadSpeed.512000.upload.speed=512000
Added more menu settings for TinyPICO - Fash mode and Flash speed. Set Flash mode default to QIO (#2976)
2019-07-16 16:15:13 +02:00
tinypico.menu.FlashMode.qio=QIO
tinypico.menu.FlashMode.qio.build.flash_mode=dio
tinypico.menu.FlashMode.qio.build.boot=qio
tinypico.menu.FlashMode.dio=DIO
tinypico.menu.FlashMode.dio.build.flash_mode=dio
tinypico.menu.FlashMode.dio.build.boot=dio
tinypico.menu.FlashFreq.80=80MHz
tinypico.menu.FlashFreq.80.build.flash_freq=80m
tinypico.menu.FlashFreq.40=40MHz
tinypico.menu.FlashFreq.40.build.flash_freq=40m
Added support for TinyPICO in the boards list (#2901)
2019-07-09 18:40:34 +02:00
tinypico.menu.PSRAM.enabled=Enabled
tinypico.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
tinypico.menu.PSRAM.disabled=Disabled
tinypico.menu.PSRAM.disabled.build.defines=
tinypico.menu.DebugLevel.none=None
tinypico.menu.DebugLevel.none.build.code_debug=0
tinypico.menu.DebugLevel.error=Error
tinypico.menu.DebugLevel.error.build.code_debug=1
tinypico.menu.DebugLevel.warn=Warn
tinypico.menu.DebugLevel.warn.build.code_debug=2
tinypico.menu.DebugLevel.info=Info
tinypico.menu.DebugLevel.info.build.code_debug=3
tinypico.menu.DebugLevel.debug=Debug
tinypico.menu.DebugLevel.debug.build.code_debug=4
tinypico.menu.DebugLevel.verbose=Verbose
tinypico.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
create variant for magicbit board (#2987) * create varient for magicbit board * update boards.txt
2019-07-17 09:10:45 +02:00
magicbit.name=MagicBit
magicbit.upload.tool=esptool_py
magicbit.upload.maximum_size=1310720
magicbit.upload.maximum_data_size=327680
magicbit.upload.wait_for_upload_port=true
magicbit.serial.disableDTR=true
magicbit.serial.disableRTS=true
magicbit.build.mcu=esp32
magicbit.build.core=esp32
Magicbit Variant (#3107) * Updated magicbit variant * Added LED_BUILTIN
2019-08-20 14:44:12 +02:00
magicbit.build.variant=magicbit
create variant for magicbit board (#2987) * create varient for magicbit board * update boards.txt
2019-07-17 09:10:45 +02:00
magicbit.build.board=ESP32_DEV
magicbit.build.f_cpu=240000000L
magicbit.build.flash_size=4MB
magicbit.build.flash_freq=40m
magicbit.build.flash_mode=dio
magicbit.build.boot=dio
magicbit.build.partitions=default
magicbit.menu.CPUFreq.240=240MHz (WiFi/BT)
magicbit.menu.CPUFreq.240.build.f_cpu=240000000L
magicbit.menu.CPUFreq.160=160MHz (WiFi/BT)
magicbit.menu.CPUFreq.160.build.f_cpu=160000000L
magicbit.menu.CPUFreq.80=80MHz (WiFi/BT)
magicbit.menu.CPUFreq.80.build.f_cpu=80000000L
magicbit.menu.CPUFreq.40=40MHz (40MHz XTAL)
magicbit.menu.UploadSpeed.921600=921600
magicbit.menu.UploadSpeed.921600.upload.speed=921600
magicbit.menu.UploadSpeed.115200=115200
magicbit.menu.UploadSpeed.115200.upload.speed=115200
##############################################################
Add Turta IoT Node Board (#2208)
2018-12-17 23:11:05 +01:00
turta_iot_node.name=Turta IoT Node
turta_iot_node.upload.tool=esptool_py
turta_iot_node.upload.maximum_size=1310720
turta_iot_node.upload.maximum_data_size=327680
turta_iot_node.upload.wait_for_upload_port=true
turta_iot_node.serial.disableDTR=true
turta_iot_node.serial.disableRTS=true
turta_iot_node.build.mcu=esp32
turta_iot_node.build.core=esp32
turta_iot_node.build.variant=pico32
turta_iot_node.build.board=ESP32_PICO
turta_iot_node.build.f_cpu=240000000L
turta_iot_node.build.flash_size=4MB
turta_iot_node.build.flash_freq=80m
turta_iot_node.build.flash_mode=dio
turta_iot_node.build.boot=dio
turta_iot_node.build.partitions=default
turta_iot_node.build.defines=
turta_iot_node.menu.UploadSpeed.921600=921600
turta_iot_node.menu.UploadSpeed.921600.upload.speed=921600
turta_iot_node.menu.UploadSpeed.115200=115200
turta_iot_node.menu.UploadSpeed.115200.upload.speed=115200
turta_iot_node.menu.DebugLevel.none=None
turta_iot_node.menu.DebugLevel.none.build.code_debug=0
turta_iot_node.menu.DebugLevel.error=Error
turta_iot_node.menu.DebugLevel.error.build.code_debug=1
turta_iot_node.menu.DebugLevel.warn=Warn
turta_iot_node.menu.DebugLevel.warn.build.code_debug=2
turta_iot_node.menu.DebugLevel.info=Info
turta_iot_node.menu.DebugLevel.info.build.code_debug=3
turta_iot_node.menu.DebugLevel.debug=Debug
turta_iot_node.menu.DebugLevel.debug.build.code_debug=4
turta_iot_node.menu.DebugLevel.verbose=Verbose
turta_iot_node.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
ttgo-lora32-v1.name=TTGO LoRa32-OLED V1
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
ttgo-lora32-v1.upload.tool=esptool_py
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
ttgo-lora32-v1.upload.maximum_size=1310720
ttgo-lora32-v1.upload.maximum_data_size=294912
ttgo-lora32-v1.upload.wait_for_upload_port=true
ttgo-lora32-v1.serial.disableDTR=true
ttgo-lora32-v1.serial.disableRTS=true
ttgo-lora32-v1.build.mcu=esp32
ttgo-lora32-v1.build.core=esp32
ttgo-lora32-v1.build.variant=ttgo-lora32-v1
ttgo-lora32-v1.build.board=TTGO_LoRa32_V1
ttgo-lora32-v1.build.f_cpu=240000000L
ttgo-lora32-v1.build.flash_mode=dio
ttgo-lora32-v1.build.flash_size=4MB
ttgo-lora32-v1.build.boot=dio
ttgo-lora32-v1.build.partitions=default
ttgo-lora32-v1.menu.FlashFreq.80=80MHz
ttgo-lora32-v1.menu.FlashFreq.80.build.flash_freq=80m
ttgo-lora32-v1.menu.FlashFreq.40=40MHz
ttgo-lora32-v1.menu.FlashFreq.40.build.flash_freq=40m
ttgo-lora32-v1.menu.UploadSpeed.921600=921600
ttgo-lora32-v1.menu.UploadSpeed.921600.upload.speed=921600
ttgo-lora32-v1.menu.UploadSpeed.115200=115200
ttgo-lora32-v1.menu.UploadSpeed.115200.upload.speed=115200
ttgo-lora32-v1.menu.UploadSpeed.256000.windows=256000
ttgo-lora32-v1.menu.UploadSpeed.256000.upload.speed=256000
ttgo-lora32-v1.menu.UploadSpeed.230400.windows.upload.speed=256000
ttgo-lora32-v1.menu.UploadSpeed.230400=230400
ttgo-lora32-v1.menu.UploadSpeed.230400.upload.speed=230400
ttgo-lora32-v1.menu.UploadSpeed.460800.linux=460800
ttgo-lora32-v1.menu.UploadSpeed.460800.macosx=460800
ttgo-lora32-v1.menu.UploadSpeed.460800.upload.speed=460800
ttgo-lora32-v1.menu.UploadSpeed.512000.windows=512000
ttgo-lora32-v1.menu.UploadSpeed.512000.upload.speed=512000
ttgo-lora32-v1.menu.DebugLevel.none=None
ttgo-lora32-v1.menu.DebugLevel.none.build.code_debug=0
ttgo-lora32-v1.menu.DebugLevel.error=Error
ttgo-lora32-v1.menu.DebugLevel.error.build.code_debug=1
ttgo-lora32-v1.menu.DebugLevel.warn=Warn
ttgo-lora32-v1.menu.DebugLevel.warn.build.code_debug=2
ttgo-lora32-v1.menu.DebugLevel.info=Info
ttgo-lora32-v1.menu.DebugLevel.info.build.code_debug=3
ttgo-lora32-v1.menu.DebugLevel.debug=Debug
ttgo-lora32-v1.menu.DebugLevel.debug.build.code_debug=4
ttgo-lora32-v1.menu.DebugLevel.verbose=Verbose
ttgo-lora32-v1.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Adding TTGO T1 board definition (#2744) Fixes https://github.com/espressif/arduino-esp32/issues/2740
2019-05-11 10:20:57 +02:00
ttgo-t1.name=TTGO T1
ttgo-t1.upload.tool=esptool_py
ttgo-t1.upload.maximum_size=1310720
ttgo-t1.upload.maximum_data_size=327680
ttgo-t1.upload.wait_for_upload_port=true
ttgo-t1.serial.disableDTR=true
ttgo-t1.serial.disableRTS=true
ttgo-t1.build.mcu=esp32
ttgo-t1.build.core=esp32
ttgo-t1.build.variant=ttgo-t1
ttgo-t1.build.board=TTGO_T1
ttgo-t1.build.f_cpu=240000000L
ttgo-t1.build.flash_size=4MB
ttgo-t1.build.flash_freq=40m
ttgo-t1.build.flash_mode=dio
ttgo-t1.build.boot=dio
ttgo-t1.build.partitions=default
ttgo-t1.build.defines=
ttgo-t1.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
ttgo-t1.menu.PartitionScheme.default.build.partitions=default
ttgo-t1.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
ttgo-t1.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
ttgo-t1.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
ttgo-t1.menu.PartitionScheme.minimal.build.partitions=minimal
ttgo-t1.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
ttgo-t1.menu.PartitionScheme.no_ota.build.partitions=no_ota
ttgo-t1.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
ttgo-t1.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
ttgo-t1.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
ttgo-t1.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
ttgo-t1.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
ttgo-t1.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
ttgo-t1.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
ttgo-t1.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
ttgo-t1.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
ttgo-t1.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
ttgo-t1.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
ttgo-t1.menu.PartitionScheme.huge_app.build.partitions=huge_app
ttgo-t1.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
ttgo-t1.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
ttgo-t1.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
ttgo-t1.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
ttgo-t1.menu.CPUFreq.240=240MHz (WiFi/BT)
ttgo-t1.menu.CPUFreq.240.build.f_cpu=240000000L
ttgo-t1.menu.CPUFreq.160=160MHz (WiFi/BT)
ttgo-t1.menu.CPUFreq.160.build.f_cpu=160000000L
ttgo-t1.menu.CPUFreq.80=80MHz (WiFi/BT)
ttgo-t1.menu.CPUFreq.80.build.f_cpu=80000000L
ttgo-t1.menu.CPUFreq.40=40MHz (40MHz XTAL)
ttgo-t1.menu.CPUFreq.40.build.f_cpu=40000000L
ttgo-t1.menu.CPUFreq.26=26MHz (26MHz XTAL)
ttgo-t1.menu.CPUFreq.26.build.f_cpu=26000000L
ttgo-t1.menu.CPUFreq.20=20MHz (40MHz XTAL)
ttgo-t1.menu.CPUFreq.20.build.f_cpu=20000000L
ttgo-t1.menu.CPUFreq.13=13MHz (26MHz XTAL)
ttgo-t1.menu.CPUFreq.13.build.f_cpu=13000000L
ttgo-t1.menu.CPUFreq.10=10MHz (40MHz XTAL)
ttgo-t1.menu.CPUFreq.10.build.f_cpu=10000000L
ttgo-t1.menu.FlashMode.qio=QIO
ttgo-t1.menu.FlashMode.qio.build.flash_mode=dio
ttgo-t1.menu.FlashMode.qio.build.boot=qio
ttgo-t1.menu.FlashMode.dio=DIO
ttgo-t1.menu.FlashMode.dio.build.flash_mode=dio
ttgo-t1.menu.FlashMode.dio.build.boot=dio
ttgo-t1.menu.FlashMode.qout=QOUT
ttgo-t1.menu.FlashMode.qout.build.flash_mode=dout
ttgo-t1.menu.FlashMode.qout.build.boot=qout
ttgo-t1.menu.FlashMode.dout=DOUT
ttgo-t1.menu.FlashMode.dout.build.flash_mode=dout
ttgo-t1.menu.FlashMode.dout.build.boot=dout
ttgo-t1.menu.FlashFreq.80=80MHz
ttgo-t1.menu.FlashFreq.80.build.flash_freq=80m
ttgo-t1.menu.FlashFreq.40=40MHz
ttgo-t1.menu.FlashFreq.40.build.flash_freq=40m
ttgo-t1.menu.FlashSize.4M=4MB (32Mb)
ttgo-t1.menu.FlashSize.4M.build.flash_size=4MB
ttgo-t1.menu.FlashSize.2M=2MB (16Mb)
ttgo-t1.menu.FlashSize.2M.build.flash_size=2MB
ttgo-t1.menu.FlashSize.2M.build.partitions=minimal
ttgo-t1.menu.FlashSize.16M=16MB (128Mb)
ttgo-t1.menu.FlashSize.16M.build.flash_size=16MB
ttgo-t1.menu.FlashSize.16M.build.partitions=ffat
ttgo-t1.menu.UploadSpeed.921600=921600
ttgo-t1.menu.UploadSpeed.921600.upload.speed=921600
ttgo-t1.menu.UploadSpeed.115200=115200
ttgo-t1.menu.UploadSpeed.115200.upload.speed=115200
ttgo-t1.menu.UploadSpeed.256000.windows=256000
ttgo-t1.menu.UploadSpeed.256000.upload.speed=256000
ttgo-t1.menu.UploadSpeed.230400.windows.upload.speed=256000
ttgo-t1.menu.UploadSpeed.230400=230400
ttgo-t1.menu.UploadSpeed.230400.upload.speed=230400
ttgo-t1.menu.UploadSpeed.460800.linux=460800
ttgo-t1.menu.UploadSpeed.460800.macosx=460800
ttgo-t1.menu.UploadSpeed.460800.upload.speed=460800
ttgo-t1.menu.UploadSpeed.512000.windows=512000
ttgo-t1.menu.UploadSpeed.512000.upload.speed=512000
ttgo-t1.menu.DebugLevel.none=None
ttgo-t1.menu.DebugLevel.none.build.code_debug=0
ttgo-t1.menu.DebugLevel.error=Error
ttgo-t1.menu.DebugLevel.error.build.code_debug=1
ttgo-t1.menu.DebugLevel.warn=Warn
ttgo-t1.menu.DebugLevel.warn.build.code_debug=2
ttgo-t1.menu.DebugLevel.info=Info
ttgo-t1.menu.DebugLevel.info.build.code_debug=3
ttgo-t1.menu.DebugLevel.debug=Debug
ttgo-t1.menu.DebugLevel.debug.build.code_debug=4
ttgo-t1.menu.DebugLevel.verbose=Verbose
ttgo-t1.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
cw02.name=XinaBox CW02
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
cw02.upload.tool=esptool_py
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
cw02.upload.maximum_size=1310720
cw02.upload.maximum_data_size=294912
cw02.upload.wait_for_upload_port=true
cw02.serial.disableDTR=true
cw02.serial.disableRTS=true
cw02.build.mcu=esp32
cw02.build.core=esp32
cw02.build.variant=xinabox
cw02.build.board=ESP32_DEV
cw02.build.f_cpu=240000000L
cw02.build.flash_size=4MB
cw02.build.flash_freq=40m
cw02.build.flash_mode=dio
cw02.build.boot=dio
cw02.build.partitions=default
cw02.menu.FlashMode.qio=QIO
cw02.menu.FlashMode.qio.build.flash_mode=dio
cw02.menu.FlashMode.qio.build.boot=qio
cw02.menu.FlashMode.dio=DIO
cw02.menu.FlashMode.dio.build.flash_mode=dio
cw02.menu.FlashMode.dio.build.boot=dio
cw02.menu.FlashMode.qout=QOUT
cw02.menu.FlashMode.qout.build.flash_mode=dout
cw02.menu.FlashMode.qout.build.boot=qout
cw02.menu.FlashMode.dout=DOUT
cw02.menu.FlashMode.dout.build.flash_mode=dout
cw02.menu.FlashMode.dout.build.boot=dout
cw02.menu.FlashFreq.80=80MHz
cw02.menu.FlashFreq.80.build.flash_freq=80m
cw02.menu.FlashFreq.40=40MHz
cw02.menu.FlashFreq.40.build.flash_freq=40m
cw02.menu.FlashSize.4M=4MB (32Mb)
cw02.menu.FlashSize.4M.build.flash_size=4MB
cw02.menu.FlashSize.2M=2MB (16Mb)
cw02.menu.FlashSize.2M.build.flash_size=2MB
cw02.menu.FlashSize.2M.build.partitions=minimal
cw02.menu.UploadSpeed.921600=921600
cw02.menu.UploadSpeed.921600.upload.speed=921600
cw02.menu.UploadSpeed.115200=115200
cw02.menu.UploadSpeed.115200.upload.speed=115200
cw02.menu.UploadSpeed.256000.windows=256000
cw02.menu.UploadSpeed.256000.upload.speed=256000
cw02.menu.UploadSpeed.230400.windows.upload.speed=256000
cw02.menu.UploadSpeed.230400=230400
cw02.menu.UploadSpeed.230400.upload.speed=230400
cw02.menu.UploadSpeed.460800.linux=460800
cw02.menu.UploadSpeed.460800.macosx=460800
cw02.menu.UploadSpeed.460800.upload.speed=460800
cw02.menu.UploadSpeed.512000.windows=512000
cw02.menu.UploadSpeed.512000.upload.speed=512000
cw02.menu.DebugLevel.none=None
cw02.menu.DebugLevel.none.build.code_debug=0
cw02.menu.DebugLevel.error=Error
cw02.menu.DebugLevel.error.build.code_debug=1
cw02.menu.DebugLevel.warn=Warn
cw02.menu.DebugLevel.warn.build.code_debug=2
cw02.menu.DebugLevel.info=Info
cw02.menu.DebugLevel.info.build.code_debug=3
cw02.menu.DebugLevel.debug=Debug
cw02.menu.DebugLevel.debug.build.code_debug=4
cw02.menu.DebugLevel.verbose=Verbose
cw02.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.name=SparkFun ESP32 Thing
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32thing.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
esp32thing.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32thing.upload.maximum_data_size=327680
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.upload.wait_for_upload_port=true
esp32thing.serial.disableDTR=true
esp32thing.serial.disableRTS=true
esp32thing.build.mcu=esp32
esp32thing.build.core=esp32
esp32thing.build.variant=esp32thing
esp32thing.build.board=ESP32_THING
esp32thing.build.f_cpu=240000000L
esp32thing.build.flash_mode=dio
esp32thing.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32thing.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32thing.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32thing.build.defines=
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.menu.FlashFreq.80=80MHz
esp32thing.menu.FlashFreq.80.build.flash_freq=80m
esp32thing.menu.FlashFreq.40=40MHz
esp32thing.menu.FlashFreq.40.build.flash_freq=40m
Updating Boart.txt ESP32Thing in PartitionScheme and DebugLevel (#1860)
2018-09-17 21:12:15 +02:00
esp32thing.menu.PartitionScheme.default=Default
esp32thing.menu.PartitionScheme.default.build.partitions=default
esp32thing.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32thing.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32thing.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32thing.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32thing.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32thing.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
esp32thing.menu.UploadSpeed.921600=921600
esp32thing.menu.UploadSpeed.921600.upload.speed=921600
esp32thing.menu.UploadSpeed.115200=115200
esp32thing.menu.UploadSpeed.115200.upload.speed=115200
esp32thing.menu.UploadSpeed.256000.windows=256000
esp32thing.menu.UploadSpeed.256000.upload.speed=256000
esp32thing.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32thing.menu.UploadSpeed.230400=230400
esp32thing.menu.UploadSpeed.230400.upload.speed=230400
esp32thing.menu.UploadSpeed.460800.linux=460800
esp32thing.menu.UploadSpeed.460800.macosx=460800
esp32thing.menu.UploadSpeed.460800.upload.speed=460800
esp32thing.menu.UploadSpeed.512000.windows=512000
esp32thing.menu.UploadSpeed.512000.upload.speed=512000
Updating Boart.txt ESP32Thing in PartitionScheme and DebugLevel (#1860)
2018-09-17 21:12:15 +02:00
esp32thing.menu.DebugLevel.none=None
esp32thing.menu.DebugLevel.none.build.code_debug=0
esp32thing.menu.DebugLevel.error=Error
esp32thing.menu.DebugLevel.error.build.code_debug=1
esp32thing.menu.DebugLevel.warn=Warn
esp32thing.menu.DebugLevel.warn.build.code_debug=2
esp32thing.menu.DebugLevel.info=Info
esp32thing.menu.DebugLevel.info.build.code_debug=3
esp32thing.menu.DebugLevel.debug=Debug
esp32thing.menu.DebugLevel.debug.build.code_debug=4
esp32thing.menu.DebugLevel.verbose=Verbose
esp32thing.menu.DebugLevel.verbose.build.code_debug=5
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.name=u-blox NINA-W10 series (ESP32)
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
nina_w10.upload.tool=esptool_py
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
nina_w10.upload.maximum_data_size=327680
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.upload.wait_for_upload_port=true
nina_w10.serial.disableDTR=true
nina_w10.serial.disableRTS=true
nina_w10.build.mcu=esp32
nina_w10.build.core=esp32
nina_w10.build.variant=nina_w10
nina_w10.build.board=UBLOX_NINA_W10
nina_w10.build.f_cpu=240000000L
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
nina_w10.build.boot=dio
adjust partitions for 2MB (#780) use minimal partitions
2017-10-30 10:29:11 +01:00
nina_w10.build.partitions=minimal
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.build.flash_mode=dio
nina_w10.build.flash_size=2MB
nina_w10.build.flash_freq=40m
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
nina_w10.build.defines=
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
nina_w10.menu.UploadSpeed.921600=921600
nina_w10.menu.UploadSpeed.921600.upload.speed=921600
nina_w10.menu.UploadSpeed.115200=115200
nina_w10.menu.UploadSpeed.115200.upload.speed=115200
nina_w10.menu.UploadSpeed.256000.windows=256000
nina_w10.menu.UploadSpeed.256000.upload.speed=256000
nina_w10.menu.UploadSpeed.230400.windows.upload.speed=256000
nina_w10.menu.UploadSpeed.230400=230400
nina_w10.menu.UploadSpeed.230400.upload.speed=230400
nina_w10.menu.UploadSpeed.460800.linux=460800
nina_w10.menu.UploadSpeed.460800.macosx=460800
nina_w10.menu.UploadSpeed.460800.upload.speed=460800
nina_w10.menu.UploadSpeed.512000.windows=512000
nina_w10.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
widora-air.name=Widora AIR
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
widora-air.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
widora-air.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
widora-air.upload.maximum_data_size=327680
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
widora-air.upload.wait_for_upload_port=true
widora-air.serial.disableDTR=true
widora-air.serial.disableRTS=true
widora-air.build.mcu=esp32
widora-air.build.core=esp32
widora-air.build.variant=widora-air
widora-air.build.board=WIDORA_AIR
widora-air.build.f_cpu=240000000L
widora-air.build.flash_mode=dio
widora-air.build.flash_size=16MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
widora-air.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
widora-air.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
widora-air.build.defines=
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
widora-air.menu.FlashFreq.80=80MHz
widora-air.menu.FlashFreq.80.build.flash_freq=80m
widora-air.menu.FlashFreq.40=40MHz
widora-air.menu.FlashFreq.40.build.flash_freq=40m
widora-air.menu.UploadSpeed.921600=921600
widora-air.menu.UploadSpeed.921600.upload.speed=921600
widora-air.menu.UploadSpeed.115200=115200
widora-air.menu.UploadSpeed.115200.upload.speed=115200
widora-air.menu.UploadSpeed.256000.windows=256000
widora-air.menu.UploadSpeed.256000.upload.speed=256000
widora-air.menu.UploadSpeed.230400.windows.upload.speed=256000
widora-air.menu.UploadSpeed.230400=230400
widora-air.menu.UploadSpeed.230400.upload.speed=230400
widora-air.menu.UploadSpeed.460800.linux=460800
widora-air.menu.UploadSpeed.460800.macosx=460800
widora-air.menu.UploadSpeed.460800.upload.speed=460800
widora-air.menu.UploadSpeed.512000.windows=512000
widora-air.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.name=Electronic SweetPeas - ESP320
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp320.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
esp320.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp320.upload.maximum_data_size=327680
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.upload.wait_for_upload_port=true
esp320.serial.disableDTR=true
esp320.serial.disableRTS=true
esp320.build.mcu=esp32
esp320.build.core=esp32
esp320.build.variant=esp320
esp320.build.board=ESP320
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
esp320.build.f_cpu=240000000L
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.build.flash_mode=qio
esp320.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp320.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp320.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp320.build.defines=
First addition of ESP320 support (#19) * First addition of ESP320 support * Updated maximum data size.
2016-10-17 16:53:13 +02:00
esp320.menu.FlashFreq.80=80MHz
esp320.menu.FlashFreq.80.build.flash_freq=80m
esp320.menu.FlashFreq.40=40MHz
esp320.menu.FlashFreq.40.build.flash_freq=40m
esp320.menu.UploadSpeed.921600=921600
esp320.menu.UploadSpeed.921600.upload.speed=921600
esp320.menu.UploadSpeed.115200=115200
esp320.menu.UploadSpeed.115200.upload.speed=115200
esp320.menu.UploadSpeed.256000.windows=256000
esp320.menu.UploadSpeed.256000.upload.speed=256000
esp320.menu.UploadSpeed.230400.windows.upload.speed=256000
esp320.menu.UploadSpeed.230400=230400
esp320.menu.UploadSpeed.230400.upload.speed=230400
esp320.menu.UploadSpeed.460800.linux=460800
esp320.menu.UploadSpeed.460800.macosx=460800
esp320.menu.UploadSpeed.460800.upload.speed=460800
esp320.menu.UploadSpeed.512000.windows=512000
esp320.menu.UploadSpeed.512000.upload.speed=512000
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.name=Nano32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
nano32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
nano32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
nano32.upload.maximum_data_size=327680
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.upload.wait_for_upload_port=true
nano32.serial.disableDTR=true
nano32.serial.disableRTS=true
nano32.build.mcu=esp32
nano32.build.core=esp32
nano32.build.variant=nano32
nano32.build.board=NANO32
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
nano32.build.f_cpu=240000000L
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.build.flash_mode=dio
nano32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
nano32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
nano32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
nano32.build.defines=
Add Nano32 board. (#21)
2016-10-19 11:28:05 +02:00
nano32.menu.FlashFreq.80=80MHz
nano32.menu.FlashFreq.80.build.flash_freq=80m
nano32.menu.FlashFreq.40=40MHz
nano32.menu.FlashFreq.40.build.flash_freq=40m
nano32.menu.UploadSpeed.921600=921600
nano32.menu.UploadSpeed.921600.upload.speed=921600
nano32.menu.UploadSpeed.115200=115200
nano32.menu.UploadSpeed.115200.upload.speed=115200
nano32.menu.UploadSpeed.256000.windows=256000
nano32.menu.UploadSpeed.256000.upload.speed=256000
nano32.menu.UploadSpeed.230400.windows.upload.speed=256000
nano32.menu.UploadSpeed.230400=230400
nano32.menu.UploadSpeed.230400.upload.speed=230400
nano32.menu.UploadSpeed.460800.linux=460800
nano32.menu.UploadSpeed.460800.macosx=460800
nano32.menu.UploadSpeed.460800.upload.speed=460800
nano32.menu.UploadSpeed.512000.windows=512000
nano32.menu.UploadSpeed.512000.upload.speed=512000
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
##############################################################
add LOLIN D32 & D32 PRO Board support (#1688)
2018-07-28 09:27:26 +02:00
d32.name=LOLIN D32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
d32.upload.tool=esptool_py
add LOLIN D32 & D32 PRO Board support (#1688)
2018-07-28 09:27:26 +02:00
d32.upload.maximum_size=1310720
d32.upload.maximum_data_size=327680
d32.upload.wait_for_upload_port=true
d32.serial.disableDTR=true
d32.serial.disableRTS=true
d32.build.mcu=esp32
d32.build.core=esp32
d32.build.variant=d32
d32.build.board=LOLIN_D32
d32.build.f_cpu=240000000L
d32.build.flash_size=4MB
d32.build.flash_freq=40m
d32.build.flash_mode=dio
d32.build.boot=dio
d32.build.partitions=default
d32.build.defines=
d32.menu.PartitionScheme.default=Default
d32.menu.PartitionScheme.default.build.partitions=default
d32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
d32.menu.PartitionScheme.minimal.build.partitions=minimal
d32.menu.PartitionScheme.no_ota=No OTA (Large APP)
d32.menu.PartitionScheme.no_ota.build.partitions=no_ota
d32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
d32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
d32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
d32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
d32.menu.FlashFreq.80=80MHz
d32.menu.FlashFreq.80.build.flash_freq=80m
d32.menu.FlashFreq.40=40MHz
d32.menu.FlashFreq.40.build.flash_freq=40m
d32.menu.UploadSpeed.921600=921600
d32.menu.UploadSpeed.921600.upload.speed=921600
d32.menu.UploadSpeed.115200=115200
d32.menu.UploadSpeed.115200.upload.speed=115200
d32.menu.UploadSpeed.256000.windows=256000
d32.menu.UploadSpeed.256000.upload.speed=256000
d32.menu.UploadSpeed.230400.windows.upload.speed=256000
d32.menu.UploadSpeed.230400=230400
d32.menu.UploadSpeed.230400.upload.speed=230400
d32.menu.UploadSpeed.460800.linux=460800
d32.menu.UploadSpeed.460800.macosx=460800
d32.menu.UploadSpeed.460800.upload.speed=460800
d32.menu.UploadSpeed.512000.windows=512000
d32.menu.UploadSpeed.512000.upload.speed=512000
d32.menu.DebugLevel.none=None
d32.menu.DebugLevel.none.build.code_debug=0
d32.menu.DebugLevel.error=Error
d32.menu.DebugLevel.error.build.code_debug=1
d32.menu.DebugLevel.warn=Warn
d32.menu.DebugLevel.warn.build.code_debug=2
d32.menu.DebugLevel.info=Info
d32.menu.DebugLevel.info.build.code_debug=3
d32.menu.DebugLevel.debug=Debug
d32.menu.DebugLevel.debug.build.code_debug=4
d32.menu.DebugLevel.verbose=Verbose
d32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
d32_pro.name=LOLIN D32 PRO
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
d32_pro.upload.tool=esptool_py
add LOLIN D32 & D32 PRO Board support (#1688)
2018-07-28 09:27:26 +02:00
d32_pro.upload.maximum_size=1310720
d32_pro.upload.maximum_data_size=327680
d32_pro.upload.wait_for_upload_port=true
d32_pro.serial.disableDTR=true
d32_pro.serial.disableRTS=true
d32_pro.build.mcu=esp32
d32_pro.build.core=esp32
d32_pro.build.variant=d32_pro
d32_pro.build.board=LOLIN_D32_PRO
d32_pro.build.f_cpu=240000000L
d32_pro.build.flash_size=4MB
d32_pro.build.flash_freq=40m
d32_pro.build.flash_mode=dio
d32_pro.build.boot=dio
d32_pro.build.partitions=default
d32_pro.build.defines=
d32_pro.menu.PSRAM.disabled=Disabled
d32_pro.menu.PSRAM.disabled.build.defines=
d32_pro.menu.PSRAM.enabled=Enabled
d32_pro.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
d32_pro.menu.PartitionScheme.default=Default
d32_pro.menu.PartitionScheme.default.build.partitions=default
d32_pro.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
d32_pro.menu.PartitionScheme.minimal.build.partitions=minimal
d32_pro.menu.PartitionScheme.no_ota=No OTA (Large APP)
d32_pro.menu.PartitionScheme.no_ota.build.partitions=no_ota
d32_pro.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
d32_pro.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
d32_pro.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
d32_pro.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
d32_pro.menu.FlashFreq.80=80MHz
d32_pro.menu.FlashFreq.80.build.flash_freq=80m
d32_pro.menu.FlashFreq.40=40MHz
d32_pro.menu.FlashFreq.40.build.flash_freq=40m
d32_pro.menu.UploadSpeed.921600=921600
d32_pro.menu.UploadSpeed.921600.upload.speed=921600
d32_pro.menu.UploadSpeed.115200=115200
d32_pro.menu.UploadSpeed.115200.upload.speed=115200
d32_pro.menu.UploadSpeed.256000.windows=256000
d32_pro.menu.UploadSpeed.256000.upload.speed=256000
d32_pro.menu.UploadSpeed.230400.windows.upload.speed=256000
d32_pro.menu.UploadSpeed.230400=230400
d32_pro.menu.UploadSpeed.230400.upload.speed=230400
d32_pro.menu.UploadSpeed.460800.linux=460800
d32_pro.menu.UploadSpeed.460800.macosx=460800
d32_pro.menu.UploadSpeed.460800.upload.speed=460800
d32_pro.menu.UploadSpeed.512000.windows=512000
d32_pro.menu.UploadSpeed.512000.upload.speed=512000
d32_pro.menu.DebugLevel.none=None
d32_pro.menu.DebugLevel.none.build.code_debug=0
d32_pro.menu.DebugLevel.error=Error
d32_pro.menu.DebugLevel.error.build.code_debug=1
d32_pro.menu.DebugLevel.warn=Warn
d32_pro.menu.DebugLevel.warn.build.code_debug=2
d32_pro.menu.DebugLevel.info=Info
d32_pro.menu.DebugLevel.info.build.code_debug=3
d32_pro.menu.DebugLevel.debug=Debug
d32_pro.menu.DebugLevel.debug.build.code_debug=4
d32_pro.menu.DebugLevel.verbose=Verbose
d32_pro.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Update LED_BUILTIN pin for LOLIN32 (#362) * Add ESP.getChipId() function to get ESP32's ChipID. * change getChipId() to getEfuseMac() * * Change board:Lolin32 to LOLIN32 * Update LED_BUILTIN pin for LOLIN32
2017-05-08 11:47:37 +02:00
lolin32.name=WEMOS LOLIN32
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
lolin32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
lolin32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
lolin32.upload.maximum_data_size=327680
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.upload.wait_for_upload_port=true
lolin32.serial.disableDTR=true
lolin32.serial.disableRTS=true
lolin32.build.mcu=esp32
lolin32.build.core=esp32
lolin32.build.variant=lolin32
Update LED_BUILTIN pin for LOLIN32 (#362) * Add ESP.getChipId() function to get ESP32's ChipID. * change getChipId() to getEfuseMac() * * Change board:Lolin32 to LOLIN32 * Update LED_BUILTIN pin for LOLIN32
2017-05-08 11:47:37 +02:00
lolin32.build.board=LOLIN32
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
lolin32.build.f_cpu=240000000L
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.build.flash_mode=dio
lolin32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
lolin32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
lolin32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
lolin32.build.defines=
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.menu.FlashFreq.80=80MHz
lolin32.menu.FlashFreq.80.build.flash_freq=80m
lolin32.menu.FlashFreq.40=40MHz
lolin32.menu.FlashFreq.40.build.flash_freq=40m
Add upload.maximum_size directives to boards.txt. Add partitions to LOLIN32 (#1379)
2018-05-14 13:03:46 +02:00
lolin32.menu.PartitionScheme.default=Default
lolin32.menu.PartitionScheme.default.build.partitions=default
lolin32.menu.PartitionScheme.no_ota=No OTA (Large APP)
lolin32.menu.PartitionScheme.no_ota.build.partitions=no_ota
lolin32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
lolin32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
lolin32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
lolin32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
add lolin32 CPU freq choice (#2682)
2019-04-22 21:00:23 +02:00
lolin32.menu.CPUFreq.240=240MHz (WiFi/BT)
lolin32.menu.CPUFreq.240.build.f_cpu=240000000L
lolin32.menu.CPUFreq.160=160MHz (WiFi/BT)
lolin32.menu.CPUFreq.160.build.f_cpu=160000000L
lolin32.menu.CPUFreq.80=80MHz (WiFi/BT)
lolin32.menu.CPUFreq.80.build.f_cpu=80000000L
lolin32.menu.CPUFreq.40=40MHz (40MHz XTAL)
lolin32.menu.CPUFreq.40.build.f_cpu=40000000L
lolin32.menu.CPUFreq.26=26MHz (26MHz XTAL)
lolin32.menu.CPUFreq.26.build.f_cpu=26000000L
lolin32.menu.CPUFreq.20=20MHz (40MHz XTAL)
lolin32.menu.CPUFreq.20.build.f_cpu=20000000L
lolin32.menu.CPUFreq.13=13MHz (26MHz XTAL)
lolin32.menu.CPUFreq.13.build.f_cpu=13000000L
lolin32.menu.CPUFreq.10=10MHz (40MHz XTAL)
lolin32.menu.CPUFreq.10.build.f_cpu=10000000L
Add "WEMOS LoLin32" boards support. (#35)
2016-11-08 09:54:56 +01:00
lolin32.menu.UploadSpeed.921600=921600
lolin32.menu.UploadSpeed.921600.upload.speed=921600
lolin32.menu.UploadSpeed.115200=115200
lolin32.menu.UploadSpeed.115200.upload.speed=115200
lolin32.menu.UploadSpeed.256000.windows=256000
lolin32.menu.UploadSpeed.256000.upload.speed=256000
lolin32.menu.UploadSpeed.230400.windows.upload.speed=256000
lolin32.menu.UploadSpeed.230400=230400
lolin32.menu.UploadSpeed.230400.upload.speed=230400
lolin32.menu.UploadSpeed.460800.linux=460800
lolin32.menu.UploadSpeed.460800.macosx=460800
lolin32.menu.UploadSpeed.460800.upload.speed=460800
lolin32.menu.UploadSpeed.512000.windows=512000
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
lolin32.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.name=Dongsen Tech Pocket 32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
pocket_32.upload.tool=esptool_py
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
pocket_32.upload.maximum_data_size=327680
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.upload.wait_for_upload_port=true
pocket_32.serial.disableDTR=true
pocket_32.serial.disableRTS=true
pocket_32.build.mcu=esp32
pocket_32.build.core=esp32
pocket_32.build.variant=pocket_32
pocket_32.build.board=Pocket32
pocket_32.build.f_cpu=240000000L
pocket_32.build.flash_mode=dio
pocket_32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
pocket_32.build.boot=dio
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
pocket_32.build.defines=
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
pocket_32.menu.FlashFreq.80=80MHz
pocket_32.menu.FlashFreq.80.build.flash_freq=80m
pocket_32.menu.FlashFreq.40=40MHz
pocket_32.menu.FlashFreq.40.build.flash_freq=40m
pocket_32.menu.UploadSpeed.921600=921600
pocket_32.menu.UploadSpeed.921600.upload.speed=921600
pocket_32.menu.UploadSpeed.115200=115200
pocket_32.menu.UploadSpeed.115200.upload.speed=115200
pocket_32.menu.UploadSpeed.256000.windows=256000
pocket_32.menu.UploadSpeed.256000.upload.speed=256000
pocket_32.menu.UploadSpeed.230400.windows.upload.speed=256000
pocket_32.menu.UploadSpeed.230400=230400
pocket_32.menu.UploadSpeed.230400.upload.speed=230400
pocket_32.menu.UploadSpeed.460800.linux=460800
pocket_32.menu.UploadSpeed.460800.macosx=460800
pocket_32.menu.UploadSpeed.460800.upload.speed=460800
pocket_32.menu.UploadSpeed.512000.windows=512000
pocket_32.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Changed WeMosBat.name (#3240) The old version would crash the Stino plugin, which appears not to support quotes in board names
2019-09-22 08:37:45 +02:00
WeMosBat.name=WeMos WiFi&Bluetooth Battery
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
WeMosBat.upload.tool=esptool_py
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
WeMosBat.upload.maximum_data_size=327680
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.upload.wait_for_upload_port=true
WeMosBat.serial.disableDTR=true
WeMosBat.serial.disableRTS=true
WeMosBat.build.mcu=esp32
WeMosBat.build.core=esp32
WeMosBat.build.variant=pocket_32
WeMosBat.build.board=Pocket32
WeMosBat.build.f_cpu=240000000L
WeMosBat.build.flash_mode=dio
WeMosBat.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
WeMosBat.build.boot=dio
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
WeMosBat.build.defines=
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
WeMosBat.menu.FlashFreq.80=80MHz
WeMosBat.menu.FlashFreq.80.build.flash_freq=80m
WeMosBat.menu.FlashFreq.40=40MHz
WeMosBat.menu.FlashFreq.40.build.flash_freq=40m
WeMosBat.menu.UploadSpeed.921600=921600
WeMosBat.menu.UploadSpeed.921600.upload.speed=921600
WeMosBat.menu.UploadSpeed.115200=115200
WeMosBat.menu.UploadSpeed.115200.upload.speed=115200
WeMosBat.menu.UploadSpeed.256000.windows=256000
WeMosBat.menu.UploadSpeed.256000.upload.speed=256000
WeMosBat.menu.UploadSpeed.230400.windows.upload.speed=256000
WeMosBat.menu.UploadSpeed.230400=230400
WeMosBat.menu.UploadSpeed.230400.upload.speed=230400
WeMosBat.menu.UploadSpeed.460800.linux=460800
WeMosBat.menu.UploadSpeed.460800.macosx=460800
WeMosBat.menu.UploadSpeed.460800.upload.speed=460800
WeMosBat.menu.UploadSpeed.512000.windows=512000
WeMosBat.menu.UploadSpeed.512000.upload.speed=512000
Add Core Debug Level for WeMosBat (#1222) Should we add this declaration option for all boards?
2018-04-06 18:09:19 +02:00
WeMosBat.menu.DebugLevel.none=None
WeMosBat.menu.DebugLevel.none.build.code_debug=0
WeMosBat.menu.DebugLevel.error=Error
WeMosBat.menu.DebugLevel.error.build.code_debug=1
WeMosBat.menu.DebugLevel.warn=Warn
WeMosBat.menu.DebugLevel.warn.build.code_debug=2
WeMosBat.menu.DebugLevel.info=Info
WeMosBat.menu.DebugLevel.info.build.code_debug=3
WeMosBat.menu.DebugLevel.debug=Debug
WeMosBat.menu.DebugLevel.debug.build.code_debug=4
WeMosBat.menu.DebugLevel.verbose=Verbose
WeMosBat.menu.DebugLevel.verbose.build.code_debug=5
Add Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery (which is a Pocket 32 clone) (#620) * Create new pocket_32 diretory for Pocket 32 board * Create pins_arduino.h for pocket_32 * Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
2017-09-10 22:34:31 +02:00
##############################################################
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.name=ESPea32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
espea32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
espea32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
espea32.upload.maximum_data_size=327680
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.upload.wait_for_upload_port=true
espea32.serial.disableDTR=true
espea32.serial.disableRTS=true
espea32.build.mcu=esp32
espea32.build.core=esp32
espea32.build.variant=espea32
espea32.build.board=ESPea32
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
espea32.build.f_cpu=240000000L
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.build.flash_mode=dio
espea32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espea32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
espea32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
espea32.build.defines=
Add board ESPea32 (#36) * Add from original Arduino.h * Add board "ESPea32" * cleanup * cleanup * Change SS to 5
2016-11-11 18:06:13 +01:00
espea32.menu.FlashFreq.80=80MHz
espea32.menu.FlashFreq.80.build.flash_freq=80m
espea32.menu.FlashFreq.40=40MHz
espea32.menu.FlashFreq.40.build.flash_freq=40m
espea32.menu.UploadSpeed.921600=921600
espea32.menu.UploadSpeed.921600.upload.speed=921600
espea32.menu.UploadSpeed.115200=115200
espea32.menu.UploadSpeed.115200.upload.speed=115200
espea32.menu.UploadSpeed.256000.windows=256000
espea32.menu.UploadSpeed.256000.upload.speed=256000
espea32.menu.UploadSpeed.230400.windows.upload.speed=256000
espea32.menu.UploadSpeed.230400=230400
espea32.menu.UploadSpeed.230400.upload.speed=230400
espea32.menu.UploadSpeed.460800.linux=460800
espea32.menu.UploadSpeed.460800.macosx=460800
espea32.menu.UploadSpeed.460800.upload.speed=460800
espea32.menu.UploadSpeed.512000.windows=512000
espea32.menu.UploadSpeed.512000.upload.speed=512000
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.name=Noduino Quantum
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
quantum.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
quantum.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
quantum.upload.maximum_data_size=327680
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.upload.wait_for_upload_port=true
quantum.serial.disableDTR=true
quantum.serial.disableRTS=true
quantum.build.mcu=esp32
quantum.build.core=esp32
quantum.build.variant=quantum
quantum.build.board=QUANTUM
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
quantum.build.f_cpu=240000000L
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.build.flash_mode=qio
quantum.build.flash_size=16MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
quantum.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
quantum.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
quantum.build.defines=
Add "Noduino Quantum" board (#49) * Add "Noduino Quantum" board * change the value of build.board from Quantum to QUANTUM
2016-11-13 16:35:26 +01:00
quantum.menu.FlashFreq.80=80MHz
quantum.menu.FlashFreq.80.build.flash_freq=80m
quantum.menu.FlashFreq.40=40MHz
quantum.menu.FlashFreq.40.build.flash_freq=40m
quantum.menu.UploadSpeed.921600=921600
quantum.menu.UploadSpeed.921600.upload.speed=921600
quantum.menu.UploadSpeed.115200=115200
quantum.menu.UploadSpeed.115200.upload.speed=115200
quantum.menu.UploadSpeed.256000.windows=256000
quantum.menu.UploadSpeed.256000.upload.speed=256000
quantum.menu.UploadSpeed.230400.windows.upload.speed=256000
quantum.menu.UploadSpeed.230400=230400
quantum.menu.UploadSpeed.230400.upload.speed=230400
quantum.menu.UploadSpeed.460800.linux=460800
quantum.menu.UploadSpeed.460800.macosx=460800
quantum.menu.UploadSpeed.460800.upload.speed=460800
quantum.menu.UploadSpeed.512000.windows=512000
quantum.menu.UploadSpeed.512000.upload.speed=512000
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.name=Node32s
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
node32s.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
node32s.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
node32s.upload.maximum_data_size=327680
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.upload.wait_for_upload_port=true
node32s.serial.disableDTR=true
node32s.serial.disableRTS=true
node32s.build.mcu=esp32
node32s.build.core=esp32
node32s.build.variant=node32s
node32s.build.board=Node32s
latest IDF, 240MHz and BLE enabled libs
2016-11-28 00:11:36 +01:00
node32s.build.f_cpu=240000000L
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.build.flash_mode=dio
node32s.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
node32s.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
node32s.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
node32s.build.defines=
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
Add menu items Partition Scheme and Debug Level for node32s (#3455)
2019-11-11 15:47:26 +01:00
node32s.menu.PartitionScheme.default=Default
node32s.menu.PartitionScheme.default.build.partitions=default
node32s.menu.PartitionScheme.no_ota=No OTA (Large APP)
node32s.menu.PartitionScheme.no_ota.build.partitions=no_ota
node32s.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
node32s.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
node32s.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
node32s.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add Node32s to boards.txt (#63)
2016-11-21 20:15:39 +01:00
node32s.menu.FlashFreq.80=80MHz
node32s.menu.FlashFreq.80.build.flash_freq=80m
node32s.menu.FlashFreq.40=40MHz
node32s.menu.FlashFreq.40.build.flash_freq=40m
node32s.menu.UploadSpeed.921600=921600
node32s.menu.UploadSpeed.921600.upload.speed=921600
node32s.menu.UploadSpeed.115200=115200
node32s.menu.UploadSpeed.115200.upload.speed=115200
node32s.menu.UploadSpeed.256000.windows=256000
node32s.menu.UploadSpeed.256000.upload.speed=256000
node32s.menu.UploadSpeed.230400.windows.upload.speed=256000
node32s.menu.UploadSpeed.230400=230400
node32s.menu.UploadSpeed.230400.upload.speed=230400
node32s.menu.UploadSpeed.460800.linux=460800
node32s.menu.UploadSpeed.460800.macosx=460800
node32s.menu.UploadSpeed.460800.upload.speed=460800
node32s.menu.UploadSpeed.512000.windows=512000
node32s.menu.UploadSpeed.512000.upload.speed=512000
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
Add menu items Partition Scheme and Debug Level for node32s (#3455)
2019-11-11 15:47:26 +01:00
node32s.menu.DebugLevel.none=None
node32s.menu.DebugLevel.none.build.code_debug=0
node32s.menu.DebugLevel.error=Error
node32s.menu.DebugLevel.error.build.code_debug=1
node32s.menu.DebugLevel.warn=Warn
node32s.menu.DebugLevel.warn.build.code_debug=2
node32s.menu.DebugLevel.info=Info
node32s.menu.DebugLevel.info.build.code_debug=3
node32s.menu.DebugLevel.debug=Debug
node32s.menu.DebugLevel.debug.build.code_debug=4
node32s.menu.DebugLevel.verbose=Verbose
node32s.menu.DebugLevel.verbose.build.code_debug=5
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.name=Hornbill ESP32 Dev
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
hornbill32dev.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
hornbill32dev.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
hornbill32dev.upload.maximum_data_size=327680
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.upload.wait_for_upload_port=true
hornbill32dev.serial.disableDTR=true
hornbill32dev.serial.disableRTS=true
hornbill32dev.build.mcu=esp32
hornbill32dev.build.core=esp32
hornbill32dev.build.variant=hornbill32dev
hornbill32dev.build.board=HORNBILL_ESP32_DEV
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.build.f_cpu=240000000L
hornbill32dev.build.flash_mode=dio
hornbill32dev.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
hornbill32dev.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
hornbill32dev.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
hornbill32dev.build.defines=
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32dev.menu.FlashFreq.80=80MHz
hornbill32dev.menu.FlashFreq.80.build.flash_freq=80m
hornbill32dev.menu.FlashFreq.40=40MHz
hornbill32dev.menu.FlashFreq.40.build.flash_freq=40m
hornbill32dev.menu.UploadSpeed.921600=921600
hornbill32dev.menu.UploadSpeed.921600.upload.speed=921600
hornbill32dev.menu.UploadSpeed.115200=115200
hornbill32dev.menu.UploadSpeed.115200.upload.speed=115200
hornbill32dev.menu.UploadSpeed.256000.windows=256000
hornbill32dev.menu.UploadSpeed.256000.upload.speed=256000
hornbill32dev.menu.UploadSpeed.230400.windows.upload.speed=256000
hornbill32dev.menu.UploadSpeed.230400=230400
hornbill32dev.menu.UploadSpeed.230400.upload.speed=230400
hornbill32dev.menu.UploadSpeed.460800.linux=460800
hornbill32dev.menu.UploadSpeed.460800.macosx=460800
hornbill32dev.menu.UploadSpeed.460800.upload.speed=460800
hornbill32dev.menu.UploadSpeed.512000.windows=512000
hornbill32dev.menu.UploadSpeed.512000.upload.speed=512000
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
##############################################################
Update IDF, fix SS definition, add custom partitions and debug level selection (#174) * Add build time partitions compilation * Fix wrong definition of SS pin * Add support for core debug level selection * update idf libs
2017-02-06 14:17:11 +01:00
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32minima.name=Hornbill ESP32 Minima
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
hornbill32minima.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
hornbill32minima.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
hornbill32minima.upload.maximum_data_size=327680
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32minima.upload.wait_for_upload_port=true
hornbill32minima.serial.disableDTR=true
hornbill32minima.serial.disableRTS=true
hornbill32minima.build.mcu=esp32
hornbill32minima.build.core=esp32
hornbill32minima.build.variant=hornbill32minima
hornbill32minima.build.board=HORNBILL_ESP32_MINIMA
hornbill32minima.build.f_cpu=240000000L
hornbill32minima.build.flash_mode=dio
hornbill32minima.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
hornbill32minima.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
hornbill32minima.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
hornbill32minima.build.defines=
created board defination and pin layout for ExploreEmbedded Hornbill dev and Minima boards (#131) * created board defination and pin layout for hornbill dev and minima * change in pin mapping
2017-01-16 11:14:04 +01:00
hornbill32minima.menu.FlashFreq.80=80MHz
hornbill32minima.menu.FlashFreq.80.build.flash_freq=80m
hornbill32minima.menu.FlashFreq.40=40MHz
hornbill32minima.menu.FlashFreq.40.build.flash_freq=40m
hornbill32minima.menu.UploadSpeed.921600=921600
hornbill32minima.menu.UploadSpeed.921600.upload.speed=921600
hornbill32minima.menu.UploadSpeed.115200=115200
hornbill32minima.menu.UploadSpeed.115200.upload.speed=115200
hornbill32minima.menu.UploadSpeed.256000.windows=256000
hornbill32minima.menu.UploadSpeed.256000.upload.speed=256000
hornbill32minima.menu.UploadSpeed.230400.windows.upload.speed=256000
hornbill32minima.menu.UploadSpeed.230400=230400
hornbill32minima.menu.UploadSpeed.230400.upload.speed=230400
hornbill32minima.menu.UploadSpeed.460800.linux=460800
hornbill32minima.menu.UploadSpeed.460800.macosx=460800
hornbill32minima.menu.UploadSpeed.460800.upload.speed=460800
hornbill32minima.menu.UploadSpeed.512000.windows=512000
hornbill32minima.menu.UploadSpeed.512000.upload.speed=512000
add DFRobot FireBeetle-ESP32 support (#239) * add DFRobot FireBeetle-ESP32 support * add variant for fireBeetle-ESP32 * The name of the env variant is changed to firebeetle32
2017-03-05 09:30:12 +01:00
##############################################################
firebeetle32.name=FireBeetle-ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
firebeetle32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
firebeetle32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
firebeetle32.upload.maximum_data_size=327680
add DFRobot FireBeetle-ESP32 support (#239) * add DFRobot FireBeetle-ESP32 support * add variant for fireBeetle-ESP32 * The name of the env variant is changed to firebeetle32
2017-03-05 09:30:12 +01:00
firebeetle32.upload.wait_for_upload_port=true
firebeetle32.serial.disableDTR=true
firebeetle32.serial.disableRTS=true
firebeetle32.build.mcu=esp32
firebeetle32.build.core=esp32
firebeetle32.build.variant=firebeetle32
firebeetle32.build.board=ESP32_DEV
firebeetle32.build.f_cpu=240000000L
firebeetle32.build.flash_mode=dio
firebeetle32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
firebeetle32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
firebeetle32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
firebeetle32.build.defines=
add DFRobot FireBeetle-ESP32 support (#239) * add DFRobot FireBeetle-ESP32 support * add variant for fireBeetle-ESP32 * The name of the env variant is changed to firebeetle32
2017-03-05 09:30:12 +01:00
firebeetle32.menu.FlashFreq.80=80MHz
firebeetle32.menu.FlashFreq.80.build.flash_freq=80m
firebeetle32.menu.FlashFreq.40=40MHz
firebeetle32.menu.FlashFreq.40.build.flash_freq=40m
firebeetle32.menu.UploadSpeed.921600=921600
firebeetle32.menu.UploadSpeed.921600.upload.speed=921600
firebeetle32.menu.UploadSpeed.115200=115200
firebeetle32.menu.UploadSpeed.115200.upload.speed=115200
firebeetle32.menu.UploadSpeed.256000.windows=256000
firebeetle32.menu.UploadSpeed.256000.upload.speed=256000
firebeetle32.menu.UploadSpeed.230400.windows.upload.speed=256000
firebeetle32.menu.UploadSpeed.230400=230400
firebeetle32.menu.UploadSpeed.230400.upload.speed=230400
firebeetle32.menu.UploadSpeed.460800.linux=460800
firebeetle32.menu.UploadSpeed.460800.macosx=460800
firebeetle32.menu.UploadSpeed.460800.upload.speed=460800
firebeetle32.menu.UploadSpeed.512000.windows=512000
firebeetle32.menu.UploadSpeed.512000.upload.speed=512000
1. add IntoRobot Fig support (#284)
2017-03-31 00:02:45 +02:00
##############################################################
intorobot-fig.name=IntoRobot Fig
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
intorobot-fig.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
intorobot-fig.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
intorobot-fig.upload.maximum_data_size=327680
1. add IntoRobot Fig support (#284)
2017-03-31 00:02:45 +02:00
intorobot-fig.upload.wait_for_upload_port=true
intorobot-fig.serial.disableDTR=true
intorobot-fig.serial.disableRTS=true
intorobot-fig.build.mcu=esp32
intorobot-fig.build.core=esp32
intorobot-fig.build.variant=intorobot-fig
intorobot-fig.build.board=INTOROBOT_ESP32_DEV
intorobot-fig.build.f_cpu=240000000L
intorobot-fig.build.flash_mode=dio
intorobot-fig.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
intorobot-fig.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
intorobot-fig.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
intorobot-fig.build.defines=
1. add IntoRobot Fig support (#284)
2017-03-31 00:02:45 +02:00
intorobot-fig.menu.FlashFreq.80=80MHz
intorobot-fig.menu.FlashFreq.80.build.flash_freq=80m
intorobot-fig.menu.FlashFreq.40=40MHz
intorobot-fig.menu.FlashFreq.40.build.flash_freq=40m
intorobot-fig.menu.UploadSpeed.921600=921600
intorobot-fig.menu.UploadSpeed.921600.upload.speed=921600
intorobot-fig.menu.UploadSpeed.115200=115200
intorobot-fig.menu.UploadSpeed.115200.upload.speed=115200
intorobot-fig.menu.UploadSpeed.256000.windows=256000
intorobot-fig.menu.UploadSpeed.256000.upload.speed=256000
intorobot-fig.menu.UploadSpeed.230400.windows.upload.speed=256000
intorobot-fig.menu.UploadSpeed.230400=230400
intorobot-fig.menu.UploadSpeed.230400.upload.speed=230400
intorobot-fig.menu.UploadSpeed.460800.linux=460800
intorobot-fig.menu.UploadSpeed.460800.macosx=460800
intorobot-fig.menu.UploadSpeed.460800.upload.speed=460800
intorobot-fig.menu.UploadSpeed.512000.windows=512000
intorobot-fig.menu.UploadSpeed.512000.upload.speed=512000
#334: Update boards.txt for Onehorse's ESP32 Dev Module (#337)
2017-04-28 12:29:04 +02:00
##############################################################
onehorse32dev.name=Onehorse ESP32 Dev Module
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
onehorse32dev.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
onehorse32dev.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
onehorse32dev.upload.maximum_data_size=327680
#334: Update boards.txt for Onehorse's ESP32 Dev Module (#337)
2017-04-28 12:29:04 +02:00
onehorse32dev.upload.wait_for_upload_port=true
onehorse32dev.serial.disableDTR=true
onehorse32dev.serial.disableRTS=true
onehorse32dev.build.mcu=esp32
onehorse32dev.build.core=esp32
onehorse32dev.build.variant=onehorse32dev
onehorse32dev.build.board=ONEHORSE_ESP32_DEV
onehorse32dev.build.f_cpu=240000000L
onehorse32dev.build.flash_mode=dout
onehorse32dev.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
onehorse32dev.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
onehorse32dev.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
onehorse32dev.build.defines=
#334: Update boards.txt for Onehorse's ESP32 Dev Module (#337)
2017-04-28 12:29:04 +02:00
onehorse32dev.menu.FlashFreq.80=80MHz
onehorse32dev.menu.FlashFreq.80.build.flash_freq=80m
onehorse32dev.menu.FlashFreq.40=40MHz
onehorse32dev.menu.FlashFreq.40.build.flash_freq=40m
onehorse32dev.menu.UploadSpeed.921600=921600
onehorse32dev.menu.UploadSpeed.921600.upload.speed=921600
onehorse32dev.menu.UploadSpeed.115200=115200
onehorse32dev.menu.UploadSpeed.115200.upload.speed=115200
onehorse32dev.menu.UploadSpeed.256000.windows=256000
onehorse32dev.menu.UploadSpeed.256000.upload.speed=256000
onehorse32dev.menu.UploadSpeed.230400.windows.upload.speed=256000
onehorse32dev.menu.UploadSpeed.230400=230400
onehorse32dev.menu.UploadSpeed.230400.upload.speed=230400
onehorse32dev.menu.UploadSpeed.460800.linux=460800
onehorse32dev.menu.UploadSpeed.460800.macosx=460800
onehorse32dev.menu.UploadSpeed.460800.upload.speed=460800
onehorse32dev.menu.UploadSpeed.512000.windows=512000
onehorse32dev.menu.UploadSpeed.512000.upload.speed=512000
feather variant (#364)
2017-05-08 22:06:30 +02:00
##############################################################
featheresp32.name=Adafruit ESP32 Feather
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
featheresp32.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
featheresp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
featheresp32.upload.maximum_data_size=327680
feather variant (#364)
2017-05-08 22:06:30 +02:00
featheresp32.upload.wait_for_upload_port=true
featheresp32.serial.disableDTR=true
featheresp32.serial.disableRTS=true
featheresp32.build.mcu=esp32
featheresp32.build.core=esp32
featheresp32.build.variant=feather_esp32
featheresp32.build.board=FEATHER_ESP32
featheresp32.build.f_cpu=240000000L
featheresp32.build.flash_mode=dio
featheresp32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
featheresp32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
featheresp32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
featheresp32.build.defines=
feather variant (#364)
2017-05-08 22:06:30 +02:00
featheresp32.menu.FlashFreq.80=80MHz
featheresp32.menu.FlashFreq.80.build.flash_freq=80m
featheresp32.menu.FlashFreq.40=40MHz
featheresp32.menu.FlashFreq.40.build.flash_freq=40m
featheresp32.menu.UploadSpeed.921600=921600
featheresp32.menu.UploadSpeed.921600.upload.speed=921600
featheresp32.menu.UploadSpeed.115200=115200
featheresp32.menu.UploadSpeed.115200.upload.speed=115200
featheresp32.menu.UploadSpeed.256000.windows=256000
featheresp32.menu.UploadSpeed.256000.upload.speed=256000
featheresp32.menu.UploadSpeed.230400.windows.upload.speed=256000
featheresp32.menu.UploadSpeed.230400=230400
featheresp32.menu.UploadSpeed.230400.upload.speed=230400
featheresp32.menu.UploadSpeed.460800.linux=460800
featheresp32.menu.UploadSpeed.460800.macosx=460800
featheresp32.menu.UploadSpeed.460800.upload.speed=460800
featheresp32.menu.UploadSpeed.512000.windows=512000
featheresp32.menu.UploadSpeed.512000.upload.speed=512000
Update IDF libs to 9314bf0
2017-08-01 07:51:04 +02:00
featheresp32.menu.DebugLevel.none=None
featheresp32.menu.DebugLevel.none.build.code_debug=0
featheresp32.menu.DebugLevel.error=Error
featheresp32.menu.DebugLevel.error.build.code_debug=1
featheresp32.menu.DebugLevel.warn=Warn
featheresp32.menu.DebugLevel.warn.build.code_debug=2
featheresp32.menu.DebugLevel.info=Info
featheresp32.menu.DebugLevel.info.build.code_debug=3
featheresp32.menu.DebugLevel.debug=Debug
featheresp32.menu.DebugLevel.debug.build.code_debug=4
featheresp32.menu.DebugLevel.verbose=Verbose
featheresp32.menu.DebugLevel.verbose.build.code_debug=5
Add partition schemes to adafruit featheresp32 (#3255) * Add partition schemes to adafruit featheresp32 * Removed minimal partition scheme
2019-09-24 18:21:08 +02:00
featheresp32.menu.PartitionScheme.default=Default
featheresp32.menu.PartitionScheme.default.build.partitions=default
featheresp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
featheresp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
featheresp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
featheresp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
featheresp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
featheresp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
add support for widora-air board (#367) * add support for widora-air board * change widora-air f_cpu error,from 400M to 240M
2017-05-12 09:02:46 +02:00
##############################################################
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.name=NodeMCU-32S
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
nodemcu-32s.upload.tool=esptool_py
Increase partition size to 1.25MB so BT and WiFi can fit Fixes: https://github.com/espressif/arduino-esp32/issues/339
2017-05-29 12:13:44 +02:00
nodemcu-32s.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
nodemcu-32s.upload.maximum_data_size=327680
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.upload.wait_for_upload_port=true
nodemcu-32s.serial.disableDTR=true
nodemcu-32s.serial.disableRTS=true
nodemcu-32s.build.mcu=esp32
nodemcu-32s.build.core=esp32
nodemcu-32s.build.variant=nodemcu-32s
fix NodeMCU-32S .build.board property (#812) The .build.board=xx proptery is used for generating a macro named "ARDUINO_xxx". C macro names should never have a "-" sign. * current: ARDUINO_NodeMCU-32S * should be: ARDUINO_=NodeMCU_32S
2017-11-06 14:24:00 +01:00
nodemcu-32s.build.board=NodeMCU_32S
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.build.f_cpu=240000000L
nodemcu-32s.build.flash_mode=dio
nodemcu-32s.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
nodemcu-32s.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
nodemcu-32s.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
nodemcu-32s.build.defines=
Add NodeMCU-32S board (#375) Board from AI-Thinker
2017-05-12 18:01:50 +02:00
nodemcu-32s.menu.FlashFreq.80=80MHz
nodemcu-32s.menu.FlashFreq.80.build.flash_freq=80m
nodemcu-32s.menu.FlashFreq.40=40MHz
nodemcu-32s.menu.FlashFreq.40.build.flash_freq=40m
nodemcu-32s.menu.UploadSpeed.921600=921600
nodemcu-32s.menu.UploadSpeed.921600.upload.speed=921600
nodemcu-32s.menu.UploadSpeed.115200=115200
nodemcu-32s.menu.UploadSpeed.115200.upload.speed=115200
nodemcu-32s.menu.UploadSpeed.256000.windows=256000
nodemcu-32s.menu.UploadSpeed.256000.upload.speed=256000
nodemcu-32s.menu.UploadSpeed.230400.windows.upload.speed=256000
nodemcu-32s.menu.UploadSpeed.230400=230400
nodemcu-32s.menu.UploadSpeed.230400.upload.speed=230400
nodemcu-32s.menu.UploadSpeed.460800.linux=460800
nodemcu-32s.menu.UploadSpeed.460800.macosx=460800
nodemcu-32s.menu.UploadSpeed.460800.upload.speed=460800
nodemcu-32s.menu.UploadSpeed.512000.windows=512000
nodemcu-32s.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.name=MH ET LIVE ESP32DevKIT
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
mhetesp32devkit.upload.tool=esptool_py
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
mhetesp32devkit.upload.maximum_data_size=327680
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.upload.wait_for_upload_port=true
mhetesp32devkit.serial.disableDTR=true
mhetesp32devkit.serial.disableRTS=true
mhetesp32devkit.build.mcu=esp32
mhetesp32devkit.build.core=esp32
mhetesp32devkit.build.variant=mhetesp32devkit
mhetesp32devkit.build.board=MH_ET_LIVE_ESP32DEVKIT
mhetesp32devkit.build.f_cpu=240000000L
mhetesp32devkit.build.flash_mode=dio
mhetesp32devkit.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
mhetesp32devkit.build.boot=dio
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
mhetesp32devkit.build.defines=
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.menu.FlashFreq.80=80MHz
mhetesp32devkit.menu.FlashFreq.80.build.flash_freq=80m
mhetesp32devkit.menu.FlashFreq.40=40MHz
mhetesp32devkit.menu.FlashFreq.40.build.flash_freq=40m
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32devkit.menu.PartitionScheme.default=Default
mhetesp32devkit.menu.PartitionScheme.default.build.partitions=default
mhetesp32devkit.menu.PartitionScheme.no_ota=No OTA (Large APP)
mhetesp32devkit.menu.PartitionScheme.no_ota.build.partitions=no_ota
mhetesp32devkit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
mhetesp32devkit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
mhetesp32devkit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
mhetesp32devkit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32devkit.menu.UploadSpeed.921600=921600
mhetesp32devkit.menu.UploadSpeed.921600.upload.speed=921600
mhetesp32devkit.menu.UploadSpeed.115200=115200
mhetesp32devkit.menu.UploadSpeed.115200.upload.speed=115200
mhetesp32devkit.menu.UploadSpeed.256000.windows=256000
mhetesp32devkit.menu.UploadSpeed.256000.upload.speed=256000
mhetesp32devkit.menu.UploadSpeed.230400.windows.upload.speed=256000
mhetesp32devkit.menu.UploadSpeed.230400=230400
mhetesp32devkit.menu.UploadSpeed.230400.upload.speed=230400
mhetesp32devkit.menu.UploadSpeed.460800.linux=460800
mhetesp32devkit.menu.UploadSpeed.460800.macosx=460800
mhetesp32devkit.menu.UploadSpeed.460800.upload.speed=460800
mhetesp32devkit.menu.UploadSpeed.512000.windows=512000
mhetesp32devkit.menu.UploadSpeed.512000.upload.speed=512000
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32devkit.menu.DebugLevel.none=None
mhetesp32devkit.menu.DebugLevel.none.build.code_debug=0
mhetesp32devkit.menu.DebugLevel.error=Error
mhetesp32devkit.menu.DebugLevel.error.build.code_debug=1
mhetesp32devkit.menu.DebugLevel.warn=Warn
mhetesp32devkit.menu.DebugLevel.warn.build.code_debug=2
mhetesp32devkit.menu.DebugLevel.info=Info
mhetesp32devkit.menu.DebugLevel.info.build.code_debug=3
mhetesp32devkit.menu.DebugLevel.debug=Debug
mhetesp32devkit.menu.DebugLevel.debug.build.code_debug=4
mhetesp32devkit.menu.DebugLevel.verbose=Verbose
mhetesp32devkit.menu.DebugLevel.verbose.build.code_debug=5
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
##############################################################
mhetesp32minikit.name=MH ET LIVE ESP32MiniKit
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
mhetesp32minikit.upload.tool=esptool_py
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
mhetesp32minikit.upload.maximum_data_size=327680
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.upload.wait_for_upload_port=true
mhetesp32minikit.serial.disableDTR=true
mhetesp32minikit.serial.disableRTS=true
mhetesp32minikit.build.mcu=esp32
mhetesp32minikit.build.core=esp32
mhetesp32minikit.build.variant=mhetesp32minikit
mhetesp32minikit.build.board=MH_ET_LIVE_ESP32MINIKIT
mhetesp32minikit.build.f_cpu=240000000L
mhetesp32minikit.build.flash_mode=dio
mhetesp32minikit.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
mhetesp32minikit.build.boot=dio
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
mhetesp32minikit.build.defines=
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.menu.FlashFreq.80=80MHz
mhetesp32minikit.menu.FlashFreq.80.build.flash_freq=80m
mhetesp32minikit.menu.FlashFreq.40=40MHz
mhetesp32minikit.menu.FlashFreq.40.build.flash_freq=40m
Add support for ffat on 4MB ESP32 Dev Module and mhetesp32minikit board. (#2588) * Update boards.txt Add menu items for ffat on mhetesp32minikit board. * Add partition table. * Added ffat partition for 4MB ESP32 Dev Module. * Added comment about partitioning schemes.
2019-04-09 21:11:17 +02:00
mhetesp32minikit.menu.PartitionScheme.default=Default with spiffs
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32minikit.menu.PartitionScheme.default.build.partitions=default
Add support for ffat on 4MB ESP32 Dev Module and mhetesp32minikit board. (#2588) * Update boards.txt Add menu items for ffat on mhetesp32minikit board. * Add partition table. * Added ffat partition for 4MB ESP32 Dev Module. * Added comment about partitioning schemes.
2019-04-09 21:11:17 +02:00
mhetesp32minikit.menu.PartitionScheme.defaultffat=Default with ffat
mhetesp32minikit.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32minikit.menu.PartitionScheme.no_ota=No OTA (Large APP)
mhetesp32minikit.menu.PartitionScheme.no_ota.build.partitions=no_ota
mhetesp32minikit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
mhetesp32minikit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
mhetesp32minikit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
mhetesp32minikit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
mhetesp32minikit.menu.UploadSpeed.921600=921600
mhetesp32minikit.menu.UploadSpeed.921600.upload.speed=921600
mhetesp32minikit.menu.UploadSpeed.115200=115200
mhetesp32minikit.menu.UploadSpeed.115200.upload.speed=115200
mhetesp32minikit.menu.UploadSpeed.256000.windows=256000
mhetesp32minikit.menu.UploadSpeed.256000.upload.speed=256000
mhetesp32minikit.menu.UploadSpeed.230400.windows.upload.speed=256000
mhetesp32minikit.menu.UploadSpeed.230400=230400
mhetesp32minikit.menu.UploadSpeed.230400.upload.speed=230400
mhetesp32minikit.menu.UploadSpeed.460800.linux=460800
mhetesp32minikit.menu.UploadSpeed.460800.macosx=460800
mhetesp32minikit.menu.UploadSpeed.460800.upload.speed=460800
mhetesp32minikit.menu.UploadSpeed.512000.windows=512000
mhetesp32minikit.menu.UploadSpeed.512000.upload.speed=512000
Selectable (from menu) partitions for MH ET LIVE boards (#1430) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378 * Selectable (from menu) partitions for MH ET LIVE boards in reference to other boards (m5stack, lolin32) this PR adds partition scheme selection for MH ET LIVE boards also adds Core Debug Level selection for above boards
2018-05-25 16:29:56 +02:00
mhetesp32minikit.menu.DebugLevel.none=None
mhetesp32minikit.menu.DebugLevel.none.build.code_debug=0
mhetesp32minikit.menu.DebugLevel.error=Error
mhetesp32minikit.menu.DebugLevel.error.build.code_debug=1
mhetesp32minikit.menu.DebugLevel.warn=Warn
mhetesp32minikit.menu.DebugLevel.warn.build.code_debug=2
mhetesp32minikit.menu.DebugLevel.info=Info
mhetesp32minikit.menu.DebugLevel.info.build.code_debug=3
mhetesp32minikit.menu.DebugLevel.debug=Debug
mhetesp32minikit.menu.DebugLevel.debug.build.code_debug=4
mhetesp32minikit.menu.DebugLevel.verbose=Verbose
mhetesp32minikit.menu.DebugLevel.verbose.build.code_debug=5
add mhetesp32devkit and mhetesp32minikit boards (#587) * add mhetesp32devkit and mhetesp32minikit * add mhetesp32 variants
2017-08-20 09:49:06 +02:00
#################################################################
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.name=ESP32vn IoT Uno
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32vn-iot-uno.upload.tool=esptool_py
fix upload.maximum_size as current partition size 0x140000 for esp32vn-iot-uno & heltec boards (#1052)
2018-03-04 20:29:49 +01:00
esp32vn-iot-uno.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32vn-iot-uno.upload.maximum_data_size=327680
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.upload.wait_for_upload_port=true
esp32vn-iot-uno.serial.disableDTR=true
esp32vn-iot-uno.serial.disableRTS=true
esp32vn-iot-uno.build.mcu=esp32
esp32vn-iot-uno.build.core=esp32
esp32vn-iot-uno.build.variant=esp32vn-iot-uno
Convert - to _ in build.board names (#1341) build.board is used to define a macro but - is not a permitted character in macro names. This causes the macro name to actually be only everything up to the first - and also many warnings when compiling for one of these boards: <command-line>:0:14: warning: ISO C++11 requires whitespace after the macro name <command-line>:0:14: warning: ISO C99 requires whitespace after the macro name I have followed the convention of the other build.board names by replacing - with _.
2018-05-14 13:09:25 +02:00
esp32vn-iot-uno.build.board=esp32vn_iot_uno
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.build.f_cpu=240000000L
esp32vn-iot-uno.build.flash_mode=dio
esp32vn-iot-uno.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32vn-iot-uno.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32vn-iot-uno.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32vn-iot-uno.build.defines=
add esp32vn-iot-uno board (#398) Update boards files
2017-06-02 17:43:09 +02:00
esp32vn-iot-uno.menu.FlashFreq.80=80MHz
esp32vn-iot-uno.menu.FlashFreq.80.build.flash_freq=80m
esp32vn-iot-uno.menu.FlashFreq.40=40MHz
esp32vn-iot-uno.menu.FlashFreq.40.build.flash_freq=40m
esp32vn-iot-uno.menu.UploadSpeed.921600=921600
esp32vn-iot-uno.menu.UploadSpeed.921600.upload.speed=921600
esp32vn-iot-uno.menu.UploadSpeed.115200=115200
esp32vn-iot-uno.menu.UploadSpeed.115200.upload.speed=115200
esp32vn-iot-uno.menu.UploadSpeed.256000.windows=256000
esp32vn-iot-uno.menu.UploadSpeed.256000.upload.speed=256000
esp32vn-iot-uno.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32vn-iot-uno.menu.UploadSpeed.230400=230400
esp32vn-iot-uno.menu.UploadSpeed.230400.upload.speed=230400
esp32vn-iot-uno.menu.UploadSpeed.460800.linux=460800
esp32vn-iot-uno.menu.UploadSpeed.460800.macosx=460800
esp32vn-iot-uno.menu.UploadSpeed.460800.upload.speed=460800
esp32vn-iot-uno.menu.UploadSpeed.512000.windows=512000
esp32vn-iot-uno.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.name=DOIT ESP32 DEVKIT V1
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32doit-devkit-v1.upload.tool=esptool_py
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32doit-devkit-v1.upload.maximum_data_size=327680
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.upload.wait_for_upload_port=true
esp32doit-devkit-v1.serial.disableDTR=true
esp32doit-devkit-v1.serial.disableRTS=true
esp32doit-devkit-v1.build.mcu=esp32
esp32doit-devkit-v1.build.core=esp32
esp32doit-devkit-v1.build.variant=doitESP32devkitV1
esp32doit-devkit-v1.build.board=ESP32_DEV
esp32doit-devkit-v1.build.f_cpu=240000000L
esp32doit-devkit-v1.build.flash_mode=dio
esp32doit-devkit-v1.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32doit-devkit-v1.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32doit-devkit-v1.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32doit-devkit-v1.build.defines=
Add DOIT ESP32 DEVKIT V1 board (#415)
2017-06-14 10:18:33 +02:00
esp32doit-devkit-v1.menu.FlashFreq.80=80MHz
esp32doit-devkit-v1.menu.FlashFreq.80.build.flash_freq=80m
esp32doit-devkit-v1.menu.FlashFreq.40=40MHz
esp32doit-devkit-v1.menu.FlashFreq.40.build.flash_freq=40m
esp32doit-devkit-v1.menu.UploadSpeed.921600=921600
esp32doit-devkit-v1.menu.UploadSpeed.921600.upload.speed=921600
esp32doit-devkit-v1.menu.UploadSpeed.115200=115200
esp32doit-devkit-v1.menu.UploadSpeed.115200.upload.speed=115200
esp32doit-devkit-v1.menu.UploadSpeed.256000.windows=256000
esp32doit-devkit-v1.menu.UploadSpeed.256000.upload.speed=256000
esp32doit-devkit-v1.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32doit-devkit-v1.menu.UploadSpeed.230400=230400
esp32doit-devkit-v1.menu.UploadSpeed.230400.upload.speed=230400
esp32doit-devkit-v1.menu.UploadSpeed.460800.linux=460800
esp32doit-devkit-v1.menu.UploadSpeed.460800.macosx=460800
esp32doit-devkit-v1.menu.UploadSpeed.460800.upload.speed=460800
esp32doit-devkit-v1.menu.UploadSpeed.512000.windows=512000
esp32doit-devkit-v1.menu.UploadSpeed.512000.upload.speed=512000
esp32doit-devkit-v1.menu.DebugLevel.none=None
esp32doit-devkit-v1.menu.DebugLevel.none.build.code_debug=0
esp32doit-devkit-v1.menu.DebugLevel.error=Error
esp32doit-devkit-v1.menu.DebugLevel.error.build.code_debug=1
esp32doit-devkit-v1.menu.DebugLevel.warn=Warn
esp32doit-devkit-v1.menu.DebugLevel.warn.build.code_debug=2
esp32doit-devkit-v1.menu.DebugLevel.info=Info
esp32doit-devkit-v1.menu.DebugLevel.info.build.code_debug=3
esp32doit-devkit-v1.menu.DebugLevel.debug=Debug
esp32doit-devkit-v1.menu.DebugLevel.debug.build.code_debug=4
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
##############################################################
esp32-evb.name=OLIMEX ESP32-EVB
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32-evb.upload.tool=esptool_py
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32-evb.upload.maximum_data_size=327680
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.upload.wait_for_upload_port=true
esp32-evb.serial.disableDTR=true
esp32-evb.serial.disableRTS=true
esp32-evb.build.mcu=esp32
esp32-evb.build.core=esp32
esp32-evb.build.variant=esp32-evb
Convert - to _ in build.board names (#1341) build.board is used to define a macro but - is not a permitted character in macro names. This causes the macro name to actually be only everything up to the first - and also many warnings when compiling for one of these boards: <command-line>:0:14: warning: ISO C++11 requires whitespace after the macro name <command-line>:0:14: warning: ISO C99 requires whitespace after the macro name I have followed the convention of the other build.board names by replacing - with _.
2018-05-14 13:09:25 +02:00
esp32-evb.build.board=ESP32_EVB
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.build.f_cpu=240000000L
esp32-evb.build.flash_mode=dio
esp32-evb.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32-evb.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32-evb.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32-evb.build.defines=
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-evb.menu.FlashFreq.80=80MHz
esp32-evb.menu.FlashFreq.80.build.flash_freq=80m
esp32-evb.menu.FlashFreq.40=40MHz
esp32-evb.menu.FlashFreq.40.build.flash_freq=40m
esp32-evb.menu.UploadSpeed.115200=115200
esp32-evb.menu.UploadSpeed.115200.upload.speed=115200
New version of the ESP32-EVB/Gateway/PoE boards (#2397) In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision. In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
2019-02-14 13:03:34 +01:00
esp32-evb.menu.PartitionScheme.default=Default
esp32-evb.menu.PartitionScheme.default.build.partitions=default
esp32-evb.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32-evb.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32-evb.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32-evb.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32-evb.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32-evb.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
##############################################################
esp32-gateway.name=OLIMEX ESP32-GATEWAY
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32-gateway.upload.tool=esptool_py
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
esp32-gateway.upload.maximum_data_size=327680
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.upload.wait_for_upload_port=true
esp32-gateway.serial.disableDTR=true
esp32-gateway.serial.disableRTS=true
esp32-gateway.build.mcu=esp32
esp32-gateway.build.core=esp32
esp32-gateway.build.variant=esp32-gateway
Fix Olimex board definition
2019-02-18 11:56:59 +01:00
esp32-gateway.build.board=ESP32_GATEWAY
New version of the ESP32-EVB/Gateway/PoE boards (#2397) In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision. In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
2019-02-14 13:03:34 +01:00
esp32-gateway.menu.Revision.RevC=Revision C or older
esp32-gateway.menu.Revision.RevC.build.board=ESP32_GATEWAY='C'
esp32-gateway.menu.Revision.RevE=Revision E
esp32-gateway.menu.Revision.RevE.build.board=ESP32_GATEWAY='E'
esp32-gateway.menu.Revision.RevF=Revision F
esp32-gateway.menu.Revision.RevF.build.board=ESP32_GATEWAY='F'
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.build.f_cpu=240000000L
esp32-gateway.build.flash_mode=dio
esp32-gateway.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
esp32-gateway.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
esp32-gateway.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
esp32-gateway.build.defines=
Add support for OLIMEX ESP32-EVB and ESP32-GATEWAY boards (#480)
2017-07-03 18:32:12 +02:00
esp32-gateway.menu.FlashFreq.80=80MHz
esp32-gateway.menu.FlashFreq.80.build.flash_freq=80m
esp32-gateway.menu.FlashFreq.40=40MHz
esp32-gateway.menu.FlashFreq.40.build.flash_freq=40m
esp32-gateway.menu.UploadSpeed.115200=115200
esp32-gateway.menu.UploadSpeed.115200.upload.speed=115200
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
New version of the ESP32-EVB/Gateway/PoE boards (#2397) In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision. In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
2019-02-14 13:03:34 +01:00
esp32-gateway.menu.PartitionScheme.default=Default
esp32-gateway.menu.PartitionScheme.default.build.partitions=default
esp32-gateway.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32-gateway.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32-gateway.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32-gateway.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32-gateway.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32-gateway.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
##############################################################
Update (#1992) Added Olimex board ESP32-PoE. pins_arduino header file based on the ESP32-EVB with changed SS pin and removed BOARD_HAS_1BIT_SDMMC macro.
2018-11-19 17:00:20 +01:00
esp32-poe.name=OLIMEX ESP32-PoE
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
esp32-poe.upload.tool=esptool_py
Update (#1992) Added Olimex board ESP32-PoE. pins_arduino header file based on the ESP32-EVB with changed SS pin and removed BOARD_HAS_1BIT_SDMMC macro.
2018-11-19 17:00:20 +01:00
esp32-poe.upload.maximum_size=1310720
esp32-poe.upload.maximum_data_size=327680
esp32-poe.upload.wait_for_upload_port=true
esp32-poe.serial.disableDTR=true
esp32-poe.serial.disableRTS=true
esp32-poe.build.mcu=esp32
esp32-poe.build.core=esp32
esp32-poe.build.variant=esp32-poe
esp32-poe.build.board=ESP32_POE
esp32-poe.build.f_cpu=240000000L
esp32-poe.build.flash_mode=dio
esp32-poe.build.flash_size=4MB
esp32-poe.build.boot=dio
esp32-poe.build.partitions=default
esp32-poe.build.defines=
esp32-poe.menu.FlashFreq.80=80MHz
esp32-poe.menu.FlashFreq.80.build.flash_freq=80m
esp32-poe.menu.FlashFreq.40=40MHz
esp32-poe.menu.FlashFreq.40.build.flash_freq=40m
esp32-poe.menu.UploadSpeed.115200=115200
esp32-poe.menu.UploadSpeed.115200.upload.speed=115200
New version of the ESP32-EVB/Gateway/PoE boards (#2397) In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision. In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
2019-02-14 13:03:34 +01:00
esp32-poe.menu.PartitionScheme.default=Default
esp32-poe.menu.PartitionScheme.default.build.partitions=default
esp32-poe.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32-poe.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32-poe.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32-poe.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32-poe.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32-poe.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Update (#1992) Added Olimex board ESP32-PoE. pins_arduino header file based on the ESP32-EVB with changed SS pin and removed BOARD_HAS_1BIT_SDMMC macro.
2018-11-19 17:00:20 +01:00
##############################################################
Update (#2838) Added PoE-ISO and DevKit-Lipo. For the other boards added alternative Serial (Serial1/Serial2) pins.
2019-06-05 13:44:52 +02:00
esp32-poe-iso.name=OLIMEX ESP32-PoE-ISO
esp32-poe-iso.upload.tool=esptool_py
esp32-poe-iso.upload.maximum_size=1310720
esp32-poe-iso.upload.maximum_data_size=327680
esp32-poe-iso.upload.wait_for_upload_port=true
esp32-poe-iso.serial.disableDTR=true
esp32-poe-iso.serial.disableRTS=true
esp32-poe-iso.build.mcu=esp32
esp32-poe-iso.build.core=esp32
esp32-poe-iso.build.variant=esp32-poe-iso
esp32-poe-iso.build.board=ESP32_POE_ISO
esp32-poe-iso.build.f_cpu=240000000L
esp32-poe-iso.build.flash_mode=dio
esp32-poe-iso.build.flash_size=4MB
esp32-poe-iso.build.boot=dio
esp32-poe-iso.build.partitions=default
esp32-poe-iso.build.defines=
esp32-poe-iso.menu.FlashFreq.80=80MHz
esp32-poe-iso.menu.FlashFreq.80.build.flash_freq=80m
esp32-poe-iso.menu.FlashFreq.40=40MHz
esp32-poe-iso.menu.FlashFreq.40.build.flash_freq=40m
esp32-poe-iso.menu.UploadSpeed.115200=115200
esp32-poe-iso.menu.UploadSpeed.115200.upload.speed=115200
esp32-poe-iso.menu.PartitionScheme.default=Default
esp32-poe-iso.menu.PartitionScheme.default.build.partitions=default
esp32-poe-iso.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32-poe-iso.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32-poe-iso.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32-poe-iso.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32-poe-iso.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32-poe-iso.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
##############################################################
esp32-DevKitLipo.name=OLIMEX ESP32-DevKit-LiPo
esp32-DevKitLipo.upload.tool=esptool_py
esp32-DevKitLipo.upload.maximum_size=1310720
esp32-DevKitLipo.upload.maximum_data_size=327680
esp32-DevKitLipo.upload.wait_for_upload_port=true
esp32-DevKitLipo.serial.disableDTR=true
esp32-DevKitLipo.serial.disableRTS=true
esp32-DevKitLipo.build.mcu=esp32
esp32-DevKitLipo.build.core=esp32
esp32-DevKitLipo.build.variant=esp32-devkit-lipo
esp32-DevKitLipo.build.board=ESP32_DEVKIT_LIPO
esp32-DevKitLipo.build.f_cpu=240000000L
esp32-DevKitLipo.build.flash_size=4MB
esp32-DevKitLipo.build.flash_freq=40m
esp32-DevKitLipo.build.flash_mode=dio
esp32-DevKitLipo.build.boot=dio
esp32-DevKitLipo.build.partitions=default
esp32-DevKitLipo.build.defines=
esp32-DevKitLipo.menu.PartitionScheme.default=Default
esp32-DevKitLipo.menu.PartitionScheme.default.build.partitions=default
esp32-DevKitLipo.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
esp32-DevKitLipo.menu.PartitionScheme.minimal.build.partitions=minimal
esp32-DevKitLipo.menu.PartitionScheme.no_ota=No OTA (Large APP)
esp32-DevKitLipo.menu.PartitionScheme.no_ota.build.partitions=no_ota
esp32-DevKitLipo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
esp32-DevKitLipo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
esp32-DevKitLipo.menu.PartitionScheme.huge_app.build.partitions=huge_app
esp32-DevKitLipo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
esp32-DevKitLipo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
esp32-DevKitLipo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
esp32-DevKitLipo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
esp32-DevKitLipo.menu.PartitionScheme.fatflash=16M Fat
esp32-DevKitLipo.menu.PartitionScheme.fatflash.build.partitions=ffat
esp32-DevKitLipo.menu.FlashMode.qio=QIO
esp32-DevKitLipo.menu.FlashMode.qio.build.flash_mode=dio
esp32-DevKitLipo.menu.FlashMode.qio.build.boot=qio
esp32-DevKitLipo.menu.FlashMode.dio=DIO
esp32-DevKitLipo.menu.FlashMode.dio.build.flash_mode=dio
esp32-DevKitLipo.menu.FlashMode.dio.build.boot=dio
esp32-DevKitLipo.menu.FlashMode.qout=QOUT
esp32-DevKitLipo.menu.FlashMode.qout.build.flash_mode=dout
esp32-DevKitLipo.menu.FlashMode.qout.build.boot=qout
esp32-DevKitLipo.menu.FlashMode.dout=DOUT
esp32-DevKitLipo.menu.FlashMode.dout.build.flash_mode=dout
esp32-DevKitLipo.menu.FlashMode.dout.build.boot=dout
esp32-DevKitLipo.menu.FlashFreq.80=80MHz
esp32-DevKitLipo.menu.FlashFreq.80.build.flash_freq=80m
esp32-DevKitLipo.menu.FlashFreq.40=40MHz
esp32-DevKitLipo.menu.FlashFreq.40.build.flash_freq=40m
esp32-DevKitLipo.menu.UploadSpeed.921600=921600
esp32-DevKitLipo.menu.UploadSpeed.921600.upload.speed=921600
esp32-DevKitLipo.menu.UploadSpeed.115200=115200
esp32-DevKitLipo.menu.UploadSpeed.115200.upload.speed=115200
esp32-DevKitLipo.menu.UploadSpeed.256000.windows=256000
esp32-DevKitLipo.menu.UploadSpeed.256000.upload.speed=256000
esp32-DevKitLipo.menu.UploadSpeed.230400.windows.upload.speed=256000
esp32-DevKitLipo.menu.UploadSpeed.230400=230400
esp32-DevKitLipo.menu.UploadSpeed.230400.upload.speed=230400
esp32-DevKitLipo.menu.UploadSpeed.460800.linux=460800
esp32-DevKitLipo.menu.UploadSpeed.460800.macosx=460800
esp32-DevKitLipo.menu.UploadSpeed.460800.upload.speed=460800
esp32-DevKitLipo.menu.UploadSpeed.512000.windows=512000
esp32-DevKitLipo.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.name=ThaiEasyElec's ESPino32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
espino32.upload.tool=esptool_py
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
espino32.upload.maximum_data_size=327680
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.upload.wait_for_upload_port=true
espino32.serial.disableDTR=true
espino32.serial.disableRTS=true
espino32.build.mcu=esp32
espino32.build.core=esp32
espino32.build.variant=espino32
espino32.build.board=ESPino32
espino32.build.f_cpu=240000000L
espino32.build.flash_mode=dio
espino32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espino32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
espino32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
espino32.build.defines=
Add ThaiEasyElec's ESPino32 (#506) * Create new espino32 diretory for ESPino32 board * Delete wrong create file * Create pins_arduino.h for espino32 * Update boards.txt to support ThaiEasyElec ESPino32 * Re-configure board name
2017-07-31 21:53:33 +02:00
espino32.menu.FlashFreq.80=80MHz
espino32.menu.FlashFreq.80.build.flash_freq=80m
espino32.menu.FlashFreq.40=40MHz
espino32.menu.FlashFreq.40.build.flash_freq=40m
espino32.menu.UploadSpeed.921600=921600
espino32.menu.UploadSpeed.921600.upload.speed=921600
espino32.menu.UploadSpeed.115200=115200
espino32.menu.UploadSpeed.115200.upload.speed=115200
espino32.menu.UploadSpeed.256000.windows=256000
espino32.menu.UploadSpeed.256000.upload.speed=256000
espino32.menu.UploadSpeed.230400.windows.upload.speed=256000
espino32.menu.UploadSpeed.230400=230400
espino32.menu.UploadSpeed.230400.upload.speed=230400
espino32.menu.UploadSpeed.460800.linux=460800
espino32.menu.UploadSpeed.460800.macosx=460800
espino32.menu.UploadSpeed.460800.upload.speed=460800
espino32.menu.UploadSpeed.512000.windows=512000
espino32.menu.UploadSpeed.512000.upload.speed=512000
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
##############################################################
m5stack-core-esp32.name=M5Stack-Core-ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
m5stack-core-esp32.upload.tool=esptool_py
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
m5stack-core-esp32.upload.maximum_data_size=327680
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.upload.wait_for_upload_port=true
m5stack-core-esp32.serial.disableDTR=true
m5stack-core-esp32.serial.disableRTS=true
m5stack-core-esp32.build.mcu=esp32
m5stack-core-esp32.build.core=esp32
currently, when M5Stack board is selected (#1242) M5Stack variant (pins_arduino.h) file is not automatically included, because boards.txt m5stack-core-esp32.build.variant=esp32 This commit changes m5stack-core-esp32.build.variant from esp32 to m5stack_core_esp32 also rename M5Stack variant directory from m5stack-core-esp32 to m5stack_core_esp32
2018-04-06 18:04:12 +02:00
m5stack-core-esp32.build.variant=m5stack_core_esp32
Fixed M5Stack build.board name (#1187)
2018-03-09 11:15:44 +01:00
m5stack-core-esp32.build.board=M5Stack_Core_ESP32
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.build.f_cpu=240000000L
m5stack-core-esp32.build.flash_size=4MB
m5stack-core-esp32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
m5stack-core-esp32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
m5stack-core-esp32.build.defines=
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.qio=QIO
m5stack-core-esp32.menu.FlashMode.qio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.qio.build.boot=qio
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.dio=DIO
m5stack-core-esp32.menu.FlashMode.dio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.dio.build.boot=dio
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.qout=QOUT
m5stack-core-esp32.menu.FlashMode.qout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.qout.build.boot=qout
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashMode.dout=DOUT
m5stack-core-esp32.menu.FlashMode.dout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
m5stack-core-esp32.menu.FlashMode.dout.build.boot=dout
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.FlashFreq.80=80MHz
m5stack-core-esp32.menu.FlashFreq.80.build.flash_freq=80m
m5stack-core-esp32.menu.FlashFreq.40=40MHz
m5stack-core-esp32.menu.FlashFreq.40.build.flash_freq=40m
Selectable (from menu) partitions for m5stack (#1382) * Additional partition scheme min_spiffs with minimal SPIFFS partition size and OTA support for bigger apps * Selectable (from menu) partitions for m5stack addition for m5stack (as is prepared for lolin32 board: https://github.com/espressif/arduino-esp32/pull/1379) discourse here: https://github.com/espressif/arduino-esp32/issues/1378
2018-05-14 13:03:21 +02:00
m5stack-core-esp32.menu.PartitionScheme.default=Default
m5stack-core-esp32.menu.PartitionScheme.default.build.partitions=default
m5stack-core-esp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
m5stack-core-esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
m5stack-core-esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
m5stack-core-esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
m5stack-core-esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
m5stack-core-esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add "M5Stack-Core-ESP32" boards support
2017-08-17 15:16:57 +02:00
m5stack-core-esp32.menu.UploadSpeed.921600=921600
m5stack-core-esp32.menu.UploadSpeed.921600.upload.speed=921600
m5stack-core-esp32.menu.UploadSpeed.115200=115200
m5stack-core-esp32.menu.UploadSpeed.115200.upload.speed=115200
m5stack-core-esp32.menu.UploadSpeed.256000.windows=256000
m5stack-core-esp32.menu.UploadSpeed.256000.upload.speed=256000
m5stack-core-esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
m5stack-core-esp32.menu.UploadSpeed.230400=230400
m5stack-core-esp32.menu.UploadSpeed.230400.upload.speed=230400
m5stack-core-esp32.menu.UploadSpeed.460800.linux=460800
m5stack-core-esp32.menu.UploadSpeed.460800.macosx=460800
m5stack-core-esp32.menu.UploadSpeed.460800.upload.speed=460800
m5stack-core-esp32.menu.UploadSpeed.512000.windows=512000
m5stack-core-esp32.menu.UploadSpeed.512000.upload.speed=512000
m5stack-core-esp32.menu.DebugLevel.none=None
m5stack-core-esp32.menu.DebugLevel.none.build.code_debug=0
m5stack-core-esp32.menu.DebugLevel.error=Error
m5stack-core-esp32.menu.DebugLevel.error.build.code_debug=1
m5stack-core-esp32.menu.DebugLevel.warn=Warn
m5stack-core-esp32.menu.DebugLevel.warn.build.code_debug=2
m5stack-core-esp32.menu.DebugLevel.info=Info
m5stack-core-esp32.menu.DebugLevel.info.build.code_debug=3
m5stack-core-esp32.menu.DebugLevel.debug=Debug
m5stack-core-esp32.menu.DebugLevel.debug.build.code_debug=4
m5stack-core-esp32.menu.DebugLevel.verbose=Verbose
m5stack-core-esp32.menu.DebugLevel.verbose.build.code_debug=5
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
##############################################################
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.name=M5Stack-FIRE
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
m5stack-fire.upload.tool=esptool_py
Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969)
2018-11-19 16:53:13 +01:00
m5stack-fire.upload.maximum_size=6553600
m5stack-fire.upload.maximum_data_size=4521984
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.upload.wait_for_upload_port=true
m5stack-fire.serial.disableDTR=true
m5stack-fire.serial.disableRTS=true
m5stack-fire.build.mcu=esp32
m5stack-fire.build.core=esp32
m5stack-fire.build.variant=m5stack_fire
m5stack-fire.build.board=M5STACK_FIRE
m5stack-fire.build.f_cpu=240000000L
m5stack-fire.build.flash_size=16MB
m5stack-fire.build.flash_freq=80m
m5stack-fire.build.flash_mode=dio
m5stack-fire.build.boot=dio
Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969)
2018-11-19 16:53:13 +01:00
m5stack-fire.build.partitions=default_16MB
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.build.defines=
m5stack-fire.menu.PSRAM.enabled=Enabled
m5stack-fire.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
m5stack-fire.menu.PSRAM.disabled=Disabled
m5stack-fire.menu.PSRAM.disabled.build.defines=
Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969)
2018-11-19 16:53:13 +01:00
m5stack-fire.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
m5stack-fire.menu.PartitionScheme.default.build.partitions=default_16MB
Fix wrong values in .cvs files (#3196) * Fix wrong values in .cvs files Add missing upload size for partitions bigger than default one * Add new partion to generic Fix hardcoded partition for 16M flash
2019-09-10 21:52:51 +02:00
m5stack-fire.menu.PartitionScheme.default.upload.maximum_size=6553600
Fix partition tables to reflect that M5Stack Fire has 16MB flash and 4MB PSRAM (#1969)
2018-11-19 16:53:13 +01:00
m5stack-fire.menu.PartitionScheme.large_spiffs=Large SPIFFS (7 MB)
m5stack-fire.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
m5stack-fire.menu.PartitionScheme.large_spiffs.upload.maximum_size=4685824
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
m5stack-fire.menu.UploadSpeed.921600=921600
m5stack-fire.menu.UploadSpeed.921600.upload.speed=921600
m5stack-fire.menu.UploadSpeed.115200=115200
m5stack-fire.menu.UploadSpeed.115200.upload.speed=115200
m5stack-fire.menu.UploadSpeed.256000.windows=256000
m5stack-fire.menu.UploadSpeed.256000.upload.speed=256000
m5stack-fire.menu.UploadSpeed.230400.windows.upload.speed=256000
m5stack-fire.menu.UploadSpeed.230400=230400
m5stack-fire.menu.UploadSpeed.230400.upload.speed=230400
m5stack-fire.menu.UploadSpeed.460800.linux=460800
m5stack-fire.menu.UploadSpeed.460800.macosx=460800
m5stack-fire.menu.UploadSpeed.460800.upload.speed=460800
m5stack-fire.menu.UploadSpeed.512000.windows=512000
m5stack-fire.menu.UploadSpeed.512000.upload.speed=512000
m5stack-fire.menu.DebugLevel.none=None
m5stack-fire.menu.DebugLevel.none.build.code_debug=0
m5stack-fire.menu.DebugLevel.error=Error
m5stack-fire.menu.DebugLevel.error.build.code_debug=1
m5stack-fire.menu.DebugLevel.warn=Warn
m5stack-fire.menu.DebugLevel.warn.build.code_debug=2
m5stack-fire.menu.DebugLevel.info=Info
m5stack-fire.menu.DebugLevel.info.build.code_debug=3
m5stack-fire.menu.DebugLevel.debug=Debug
m5stack-fire.menu.DebugLevel.debug.build.code_debug=4
m5stack-fire.menu.DebugLevel.verbose=Verbose
m5stack-fire.menu.DebugLevel.verbose.build.code_debug=5
Add M5Stick-C to board manager (#2594)
2019-04-09 21:13:15 +02:00
##############################################################
m5stick-c.name=M5Stick-C
m5stick-c.upload.tool=esptool_py
m5stick-c.upload.maximum_size=1310720
m5stick-c.upload.maximum_data_size=327680
m5stick-c.upload.wait_for_upload_port=true
m5stick-c.serial.disableDTR=true
m5stick-c.serial.disableRTS=true
m5stick-c.build.mcu=esp32
m5stick-c.build.core=esp32
m5stick-c.build.variant=m5stick_c
m5stick-c.build.board=M5Stick_C
m5stick-c.build.f_cpu=240000000L
m5stick-c.build.flash_size=4MB
m5stick-c.build.flash_freq=80m
m5stick-c.build.flash_mode=dio
m5stick-c.build.boot=dio
m5stick-c.build.partitions=default
m5stick-c.build.defines=
m5stick-c.menu.PartitionScheme.default=Default
m5stick-c.menu.PartitionScheme.default.build.partitions=default
m5stick-c.menu.PartitionScheme.no_ota=No OTA (Large APP)
m5stick-c.menu.PartitionScheme.no_ota.build.partitions=no_ota
m5stick-c.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
m5stick-c.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
m5stick-c.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
m5stick-c.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
m5stick-c.menu.UploadSpeed.1500000=1500000
m5stick-c.menu.UploadSpeed.1500000.upload.speed=1500000
m5stick-c.menu.UploadSpeed.750000=750000
m5stick-c.menu.UploadSpeed.750000.upload.speed=750000
m5stick-c.menu.UploadSpeed.500000=500000
m5stick-c.menu.UploadSpeed.500000.upload.speed=500000
m5stick-c.menu.UploadSpeed.250000=250000
m5stick-c.menu.UploadSpeed.250000.upload.speed=250000
m5stick-c.menu.UploadSpeed.115200=115200
m5stick-c.menu.UploadSpeed.115200.upload.speed=115200
m5stick-c.menu.DebugLevel.none=None
m5stick-c.menu.DebugLevel.none.build.code_debug=0
m5stick-c.menu.DebugLevel.error=Error
m5stick-c.menu.DebugLevel.error.build.code_debug=1
m5stick-c.menu.DebugLevel.warn=Warn
m5stick-c.menu.DebugLevel.warn.build.code_debug=2
m5stick-c.menu.DebugLevel.info=Info
m5stick-c.menu.DebugLevel.info.build.code_debug=3
m5stick-c.menu.DebugLevel.debug=Debug
m5stick-c.menu.DebugLevel.debug.build.code_debug=4
m5stick-c.menu.DebugLevel.verbose=Verbose
m5stick-c.menu.DebugLevel.verbose.build.code_debug=5
Add M5Stack-ATOM Board (#3883) * Add M5Stack-ATOM Board * Add M5Stack-ATOM Board * Add M5Stack-ATOM Board Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
2020-04-23 12:39:31 +02:00
##############################################################
m5stack-atom.name=M5Stack-ATOM
m5stack-atom.upload.tool=esptool_py
m5stack-atom.upload.maximum_size=1310720
m5stack-atom.upload.maximum_data_size=327680
m5stack-atom.upload.wait_for_upload_port=true
m5stack-atom.serial.disableDTR=true
m5stack-atom.serial.disableRTS=true
m5stack-atom.build.mcu=esp32
m5stack-atom.build.core=esp32
m5stack-atom.build.variant=m5stack_atom
m5stack-atom.build.board=M5Stack_ATOM
m5stack-atom.build.f_cpu=240000000L
m5stack-atom.build.flash_size=4MB
m5stack-atom.build.flash_freq=80m
m5stack-atom.build.flash_mode=dio
m5stack-atom.build.boot=dio
m5stack-atom.build.partitions=default
m5stack-atom.build.defines=
m5stack-atom.menu.PartitionScheme.default=Default
m5stack-atom.menu.PartitionScheme.default.build.partitions=default
m5stack-atom.menu.PartitionScheme.no_ota=No OTA (Large APP)
m5stack-atom.menu.PartitionScheme.no_ota.build.partitions=no_ota
m5stack-atom.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
m5stack-atom.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
m5stack-atom.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
m5stack-atom.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
m5stack-atom.menu.UploadSpeed.1500000=1500000
m5stack-atom.menu.UploadSpeed.1500000.upload.speed=1500000
m5stack-atom.menu.UploadSpeed.750000=750000
m5stack-atom.menu.UploadSpeed.750000.upload.speed=750000
m5stack-atom.menu.UploadSpeed.500000=500000
m5stack-atom.menu.UploadSpeed.500000.upload.speed=500000
m5stack-atom.menu.UploadSpeed.250000=250000
m5stack-atom.menu.UploadSpeed.250000.upload.speed=250000
m5stack-atom.menu.UploadSpeed.115200=115200
m5stack-atom.menu.UploadSpeed.115200.upload.speed=115200
m5stack-atom.menu.DebugLevel.none=None
m5stack-atom.menu.DebugLevel.none.build.code_debug=0
m5stack-atom.menu.DebugLevel.error=Error
m5stack-atom.menu.DebugLevel.error.build.code_debug=1
m5stack-atom.menu.DebugLevel.warn=Warn
m5stack-atom.menu.DebugLevel.warn.build.code_debug=2
m5stack-atom.menu.DebugLevel.info=Info
m5stack-atom.menu.DebugLevel.info.build.code_debug=3
m5stack-atom.menu.DebugLevel.debug=Debug
m5stack-atom.menu.DebugLevel.debug.build.code_debug=4
m5stack-atom.menu.DebugLevel.verbose=Verbose
m5stack-atom.menu.DebugLevel.verbose.build.code_debug=5
Add M5Stick-C to board manager (#2594)
2019-04-09 21:13:15 +02:00
Add M5Stack-FIRE board (#1647) * Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
2018-07-25 12:56:04 +02:00
##############################################################
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.name=ODROID ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
odroid_esp32.upload.tool=esptool_py
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
odroid_esp32.upload.maximum_data_size=327680
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.upload.wait_for_upload_port=true
odroid_esp32.serial.disableDTR=true
odroid_esp32.serial.disableRTS=true
odroid_esp32.build.mcu=esp32
odroid_esp32.build.core=esp32
odroid_esp32.build.variant=odroid_esp32
odroid_esp32.build.board=ODROID_ESP32
odroid_esp32.build.f_cpu=240000000L
odroid_esp32.build.flash_size=16MB
odroid_esp32.build.flash_mode=dio
odroid_esp32.build.boot=dio
odroid_esp32.build.partitions=default
Get Odroid-Go's PSRAM detected (#2564)
2019-04-09 21:07:53 +02:00
odroid_esp32.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
Add "ODROID ESP32" boards support (#1506)
2018-06-18 17:16:11 +02:00
odroid_esp32.menu.FlashMode.qio=QIO
odroid_esp32.menu.FlashMode.qio.build.flash_mode=dio
odroid_esp32.menu.FlashMode.qio.build.boot=qio
odroid_esp32.menu.FlashMode.dio=DIO
odroid_esp32.menu.FlashMode.dio.build.flash_mode=dio
odroid_esp32.menu.FlashMode.dio.build.boot=dio
odroid_esp32.menu.FlashMode.qout=QOUT
odroid_esp32.menu.FlashMode.qout.build.flash_mode=dout
odroid_esp32.menu.FlashMode.qout.build.boot=qout
odroid_esp32.menu.FlashMode.dout=DOUT
odroid_esp32.menu.FlashMode.dout.build.flash_mode=dout
odroid_esp32.menu.FlashMode.dout.build.boot=dout
odroid_esp32.menu.FlashFreq.80=80MHz
odroid_esp32.menu.FlashFreq.80.build.flash_freq=80m
odroid_esp32.menu.FlashFreq.40=40MHz
odroid_esp32.menu.FlashFreq.40.build.flash_freq=40m
odroid_esp32.menu.PartitionScheme.default=Default
odroid_esp32.menu.PartitionScheme.default.build.partitions=default
odroid_esp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
odroid_esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
odroid_esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
odroid_esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
odroid_esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
odroid_esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
odroid_esp32.menu.UploadSpeed.921600=921600
odroid_esp32.menu.UploadSpeed.921600.upload.speed=921600
odroid_esp32.menu.UploadSpeed.115200=115200
odroid_esp32.menu.UploadSpeed.115200.upload.speed=115200
odroid_esp32.menu.UploadSpeed.256000.windows=256000
odroid_esp32.menu.UploadSpeed.256000.upload.speed=256000
odroid_esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
odroid_esp32.menu.UploadSpeed.230400=230400
odroid_esp32.menu.UploadSpeed.230400.upload.speed=230400
odroid_esp32.menu.UploadSpeed.460800.linux=460800
odroid_esp32.menu.UploadSpeed.460800.macosx=460800
odroid_esp32.menu.UploadSpeed.460800.upload.speed=460800
odroid_esp32.menu.UploadSpeed.512000.windows=512000
odroid_esp32.menu.UploadSpeed.512000.upload.speed=512000
odroid_esp32.menu.DebugLevel.none=None
odroid_esp32.menu.DebugLevel.none.build.code_debug=0
odroid_esp32.menu.DebugLevel.error=Error
odroid_esp32.menu.DebugLevel.error.build.code_debug=1
odroid_esp32.menu.DebugLevel.warn=Warn
odroid_esp32.menu.DebugLevel.warn.build.code_debug=2
odroid_esp32.menu.DebugLevel.info=Info
odroid_esp32.menu.DebugLevel.info.build.code_debug=3
odroid_esp32.menu.DebugLevel.debug=Debug
odroid_esp32.menu.DebugLevel.debug.build.code_debug=4
odroid_esp32.menu.DebugLevel.verbose=Verbose
odroid_esp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_kit_32.name=Heltec WiFi Kit 32
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
heltec_wifi_kit_32.upload.tool=esptool_py
fix upload.maximum_size as current partition size 0x140000 for esp32vn-iot-uno & heltec boards (#1052)
2018-03-04 20:29:49 +01:00
heltec_wifi_kit_32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
heltec_wifi_kit_32.upload.maximum_data_size=327680
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_kit_32.upload.wait_for_upload_port=true
heltec_wifi_kit_32.serial.disableDTR=true
heltec_wifi_kit_32.serial.disableRTS=true
heltec_wifi_kit_32.build.mcu=esp32
heltec_wifi_kit_32.build.core=esp32
heltec_wifi_kit_32.build.variant=heltec_wifi_kit_32
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_kit_32.build.board=HELTEC_WIFI_KIT_32
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_kit_32.build.f_cpu=240000000L
heltec_wifi_kit_32.build.flash_size=4MB
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_kit_32.build.flash_freq=40m
heltec_wifi_kit_32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
heltec_wifi_kit_32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
heltec_wifi_kit_32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
heltec_wifi_kit_32.build.defines=
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_kit_32.menu.PSRAM.disabled=Disabled
heltec_wifi_kit_32.menu.PSRAM.disabled.build.defines=
heltec_wifi_kit_32.menu.PSRAM.enabled=Enabled
heltec_wifi_kit_32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
heltec_wifi_kit_32.menu.PartitionScheme.default=Default
heltec_wifi_kit_32.menu.PartitionScheme.default.build.partitions=default
heltec_wifi_kit_32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
heltec_wifi_kit_32.menu.PartitionScheme.minimal.build.partitions=minimal
heltec_wifi_kit_32.menu.PartitionScheme.no_ota=No OTA (Large APP)
heltec_wifi_kit_32.menu.PartitionScheme.no_ota.build.partitions=no_ota
heltec_wifi_kit_32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
heltec_wifi_kit_32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
heltec_wifi_kit_32.menu.PartitionScheme.huge_app.build.partitions=huge_app
heltec_wifi_kit_32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
heltec_wifi_kit_32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
heltec_wifi_kit_32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
heltec_wifi_kit_32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
heltec_wifi_kit_32.menu.PartitionScheme.fatflash=16M Fat
heltec_wifi_kit_32.menu.PartitionScheme.fatflash.build.partitions=ffat
heltec_wifi_kit_32.menu.CPUFreq.240=240MHz (WiFi/BT)
heltec_wifi_kit_32.menu.CPUFreq.240.build.f_cpu=240000000L
heltec_wifi_kit_32.menu.CPUFreq.160=160MHz (WiFi/BT)
heltec_wifi_kit_32.menu.CPUFreq.160.build.f_cpu=160000000L
heltec_wifi_kit_32.menu.CPUFreq.80=80MHz (WiFi/BT)
heltec_wifi_kit_32.menu.CPUFreq.80.build.f_cpu=80000000L
heltec_wifi_kit_32.menu.CPUFreq.26=26MHz (26MHz XTAL)
heltec_wifi_kit_32.menu.CPUFreq.26.build.f_cpu=26000000L
heltec_wifi_kit_32.menu.CPUFreq.13=13MHz (26MHz XTAL)
heltec_wifi_kit_32.menu.CPUFreq.13.build.f_cpu=13000000L
heltec_wifi_kit_32.menu.FlashMode.qio=QIO
heltec_wifi_kit_32.menu.FlashMode.qio.build.flash_mode=dio
heltec_wifi_kit_32.menu.FlashMode.qio.build.boot=qio
heltec_wifi_kit_32.menu.FlashMode.dio=DIO
heltec_wifi_kit_32.menu.FlashMode.dio.build.flash_mode=dio
heltec_wifi_kit_32.menu.FlashMode.dio.build.boot=dio
heltec_wifi_kit_32.menu.FlashMode.qout=QOUT
heltec_wifi_kit_32.menu.FlashMode.qout.build.flash_mode=dout
heltec_wifi_kit_32.menu.FlashMode.qout.build.boot=qout
heltec_wifi_kit_32.menu.FlashMode.dout=DOUT
heltec_wifi_kit_32.menu.FlashMode.dout.build.flash_mode=dout
heltec_wifi_kit_32.menu.FlashMode.dout.build.boot=dout
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_kit_32.menu.FlashFreq.40=40MHz
heltec_wifi_kit_32.menu.FlashFreq.40.build.flash_freq=40m
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_kit_32.menu.FlashFreq.80=80MHz
heltec_wifi_kit_32.menu.FlashFreq.80.build.flash_freq=80m
heltec_wifi_kit_32.menu.FlashSize.4M=4MB (32Mb)
heltec_wifi_kit_32.menu.FlashSize.4M.build.flash_size=4MB
heltec_wifi_kit_32.menu.FlashSize.2M=2MB (16Mb)
heltec_wifi_kit_32.menu.FlashSize.2M.build.flash_size=2MB
heltec_wifi_kit_32.menu.FlashSize.2M.build.partitions=minimal
heltec_wifi_kit_32.menu.FlashSize.16M=16MB (128Mb)
heltec_wifi_kit_32.menu.FlashSize.16M.build.flash_size=16MB
heltec_wifi_kit_32.menu.FlashSize.16M.build.partitions=ffat
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_kit_32.menu.UploadSpeed.921600=921600
heltec_wifi_kit_32.menu.UploadSpeed.921600.upload.speed=921600
heltec_wifi_kit_32.menu.UploadSpeed.115200=115200
heltec_wifi_kit_32.menu.UploadSpeed.115200.upload.speed=115200
heltec_wifi_kit_32.menu.UploadSpeed.256000.windows=256000
heltec_wifi_kit_32.menu.UploadSpeed.256000.upload.speed=256000
heltec_wifi_kit_32.menu.UploadSpeed.230400.windows.upload.speed=256000
heltec_wifi_kit_32.menu.UploadSpeed.230400=230400
heltec_wifi_kit_32.menu.UploadSpeed.230400.upload.speed=230400
heltec_wifi_kit_32.menu.UploadSpeed.460800.linux=460800
heltec_wifi_kit_32.menu.UploadSpeed.460800.macosx=460800
heltec_wifi_kit_32.menu.UploadSpeed.460800.upload.speed=460800
heltec_wifi_kit_32.menu.UploadSpeed.512000.windows=512000
heltec_wifi_kit_32.menu.UploadSpeed.512000.upload.speed=512000
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_kit_32.menu.DebugLevel.none=None
heltec_wifi_kit_32.menu.DebugLevel.none.build.code_debug=0
heltec_wifi_kit_32.menu.DebugLevel.error=Error
heltec_wifi_kit_32.menu.DebugLevel.error.build.code_debug=1
heltec_wifi_kit_32.menu.DebugLevel.warn=Warn
heltec_wifi_kit_32.menu.DebugLevel.warn.build.code_debug=2
heltec_wifi_kit_32.menu.DebugLevel.info=Info
heltec_wifi_kit_32.menu.DebugLevel.info.build.code_debug=3
heltec_wifi_kit_32.menu.DebugLevel.debug=Debug
heltec_wifi_kit_32.menu.DebugLevel.debug.build.code_debug=4
heltec_wifi_kit_32.menu.DebugLevel.verbose=Verbose
heltec_wifi_kit_32.menu.DebugLevel.verbose.build.code_debug=5
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
##############################################################
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32.name=Heltec WiFi LoRa 32
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
heltec_wifi_lora_32.upload.tool=esptool_py
fix upload.maximum_size as current partition size 0x140000 for esp32vn-iot-uno & heltec boards (#1052)
2018-03-04 20:29:49 +01:00
heltec_wifi_lora_32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
heltec_wifi_lora_32.upload.maximum_data_size=327680
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_lora_32.upload.wait_for_upload_port=true
heltec_wifi_lora_32.serial.disableDTR=true
heltec_wifi_lora_32.serial.disableRTS=true
heltec_wifi_lora_32.build.mcu=esp32
heltec_wifi_lora_32.build.core=esp32
heltec_wifi_lora_32.build.variant=heltec_wifi_lora_32
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32.build.board=HELTEC_WIFI_LORA_32
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_lora_32.build.f_cpu=240000000L
heltec_wifi_lora_32.build.flash_size=4MB
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32.build.flash_freq=40m
heltec_wifi_lora_32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
heltec_wifi_lora_32.build.boot=dio
Add support for 2MB flash and future option for different partition schemes
2017-08-17 19:00:22 +02:00
heltec_wifi_lora_32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
heltec_wifi_lora_32.build.defines=
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32.menu.PSRAM.disabled=Disabled
heltec_wifi_lora_32.menu.PSRAM.disabled.build.defines=
heltec_wifi_lora_32.menu.PSRAM.enabled=Enabled
heltec_wifi_lora_32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
heltec_wifi_lora_32.menu.PartitionScheme.default=Default
heltec_wifi_lora_32.menu.PartitionScheme.default.build.partitions=default
heltec_wifi_lora_32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
heltec_wifi_lora_32.menu.PartitionScheme.minimal.build.partitions=minimal
heltec_wifi_lora_32.menu.PartitionScheme.no_ota=No OTA (Large APP)
heltec_wifi_lora_32.menu.PartitionScheme.no_ota.build.partitions=no_ota
heltec_wifi_lora_32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
heltec_wifi_lora_32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
heltec_wifi_lora_32.menu.PartitionScheme.huge_app.build.partitions=huge_app
heltec_wifi_lora_32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
heltec_wifi_lora_32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
heltec_wifi_lora_32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
heltec_wifi_lora_32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
heltec_wifi_lora_32.menu.PartitionScheme.fatflash=16M Fat
heltec_wifi_lora_32.menu.PartitionScheme.fatflash.build.partitions=ffat
heltec_wifi_lora_32.menu.CPUFreq.240=240MHz (WiFi/BT)
heltec_wifi_lora_32.menu.CPUFreq.240.build.f_cpu=240000000L
heltec_wifi_lora_32.menu.CPUFreq.160=160MHz (WiFi/BT)
heltec_wifi_lora_32.menu.CPUFreq.160.build.f_cpu=160000000L
heltec_wifi_lora_32.menu.CPUFreq.80=80MHz (WiFi/BT)
heltec_wifi_lora_32.menu.CPUFreq.80.build.f_cpu=80000000L
heltec_wifi_lora_32.menu.CPUFreq.26=26MHz (26MHz XTAL)
heltec_wifi_lora_32.menu.CPUFreq.26.build.f_cpu=26000000L
heltec_wifi_lora_32.menu.CPUFreq.13=13MHz (26MHz XTAL)
heltec_wifi_lora_32.menu.CPUFreq.13.build.f_cpu=13000000L
heltec_wifi_lora_32.menu.FlashMode.qio=QIO
heltec_wifi_lora_32.menu.FlashMode.qio.build.flash_mode=dio
heltec_wifi_lora_32.menu.FlashMode.qio.build.boot=qio
heltec_wifi_lora_32.menu.FlashMode.dio=DIO
heltec_wifi_lora_32.menu.FlashMode.dio.build.flash_mode=dio
heltec_wifi_lora_32.menu.FlashMode.dio.build.boot=dio
heltec_wifi_lora_32.menu.FlashMode.qout=QOUT
heltec_wifi_lora_32.menu.FlashMode.qout.build.flash_mode=dout
heltec_wifi_lora_32.menu.FlashMode.qout.build.boot=qout
heltec_wifi_lora_32.menu.FlashMode.dout=DOUT
heltec_wifi_lora_32.menu.FlashMode.dout.build.flash_mode=dout
heltec_wifi_lora_32.menu.FlashMode.dout.build.boot=dout
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_lora_32.menu.FlashFreq.40=40MHz
heltec_wifi_lora_32.menu.FlashFreq.40.build.flash_freq=40m
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32.menu.FlashFreq.80=80MHz
heltec_wifi_lora_32.menu.FlashFreq.80.build.flash_freq=80m
heltec_wifi_lora_32.menu.FlashSize.4M=4MB (32Mb)
heltec_wifi_lora_32.menu.FlashSize.4M.build.flash_size=4MB
heltec_wifi_lora_32.menu.FlashSize.2M=2MB (16Mb)
heltec_wifi_lora_32.menu.FlashSize.2M.build.flash_size=2MB
heltec_wifi_lora_32.menu.FlashSize.2M.build.partitions=minimal
heltec_wifi_lora_32.menu.FlashSize.16M=16MB (128Mb)
heltec_wifi_lora_32.menu.FlashSize.16M.build.flash_size=16MB
heltec_wifi_lora_32.menu.FlashSize.16M.build.partitions=ffat
Add Heltec Automation WIFI Kit 32 and WIFI LoRa 32 2 board. (#584)
2017-08-17 18:24:27 +02:00
heltec_wifi_lora_32.menu.UploadSpeed.921600=921600
heltec_wifi_lora_32.menu.UploadSpeed.921600.upload.speed=921600
heltec_wifi_lora_32.menu.UploadSpeed.115200=115200
heltec_wifi_lora_32.menu.UploadSpeed.115200.upload.speed=115200
heltec_wifi_lora_32.menu.UploadSpeed.256000.windows=256000
heltec_wifi_lora_32.menu.UploadSpeed.256000.upload.speed=256000
heltec_wifi_lora_32.menu.UploadSpeed.230400.windows.upload.speed=256000
heltec_wifi_lora_32.menu.UploadSpeed.230400=230400
heltec_wifi_lora_32.menu.UploadSpeed.230400.upload.speed=230400
heltec_wifi_lora_32.menu.UploadSpeed.460800.linux=460800
heltec_wifi_lora_32.menu.UploadSpeed.460800.macosx=460800
heltec_wifi_lora_32.menu.UploadSpeed.460800.upload.speed=460800
heltec_wifi_lora_32.menu.UploadSpeed.512000.windows=512000
heltec_wifi_lora_32.menu.UploadSpeed.512000.upload.speed=512000
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32.menu.DebugLevel.none=None
heltec_wifi_lora_32.menu.DebugLevel.none.build.code_debug=0
heltec_wifi_lora_32.menu.DebugLevel.error=Error
heltec_wifi_lora_32.menu.DebugLevel.error.build.code_debug=1
heltec_wifi_lora_32.menu.DebugLevel.warn=Warn
heltec_wifi_lora_32.menu.DebugLevel.warn.build.code_debug=2
heltec_wifi_lora_32.menu.DebugLevel.info=Info
heltec_wifi_lora_32.menu.DebugLevel.info.build.code_debug=3
heltec_wifi_lora_32.menu.DebugLevel.debug=Debug
heltec_wifi_lora_32.menu.DebugLevel.debug.build.code_debug=4
heltec_wifi_lora_32.menu.DebugLevel.verbose=Verbose
heltec_wifi_lora_32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
heltec_wifi_lora_32_V2.name=Heltec WiFi LoRa 32(V2)
heltec_wifi_lora_32_V2.upload.tool=esptool_py
heltec_wifi_lora_32_V2.upload.maximum_size=1310720
heltec_wifi_lora_32_V2.upload.maximum_data_size=327680
heltec_wifi_lora_32_V2.upload.wait_for_upload_port=true
heltec_wifi_lora_32_V2.serial.disableDTR=true
heltec_wifi_lora_32_V2.serial.disableRTS=true
heltec_wifi_lora_32_V2.build.mcu=esp32
heltec_wifi_lora_32_V2.build.core=esp32
heltec_wifi_lora_32_V2.build.variant=heltec_wifi_lora_32_V2
heltec_wifi_lora_32_V2.build.board=HELTEC_WIFI_LORA_32_V2
heltec_wifi_lora_32_V2.build.f_cpu=240000000L
heltec_wifi_lora_32_V2.build.flash_size=8MB
heltec_wifi_lora_32_V2.build.flash_freq=40m
heltec_wifi_lora_32_V2.build.flash_mode=dio
heltec_wifi_lora_32_V2.build.boot=dio
heltec_wifi_lora_32_V2.build.partitions=default_8MB
heltec_wifi_lora_32_V2.build.defines=
heltec_wifi_lora_32_V2.menu.PSRAM.disabled=Disabled
heltec_wifi_lora_32_V2.menu.PSRAM.disabled.build.defines=
heltec_wifi_lora_32_V2.menu.PSRAM.enabled=Enabled
heltec_wifi_lora_32_V2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
heltec_wifi_lora_32_V2.menu.PartitionScheme.default=default_8MB
heltec_wifi_lora_32_V2.menu.PartitionScheme.default.build.partitions=default_8MB
Fix wrong values in .cvs files (#3196) * Fix wrong values in .cvs files Add missing upload size for partitions bigger than default one * Add new partion to generic Fix hardcoded partition for 16M flash
2019-09-10 21:52:51 +02:00
heltec_wifi_lora_32_V2.menu.PartitionScheme.default.upload.maximum_size=3342336
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32_V2.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
heltec_wifi_lora_32_V2.menu.PartitionScheme.minimal.build.partitions=minimal
heltec_wifi_lora_32_V2.menu.PartitionScheme.no_ota=No OTA (Large APP)
heltec_wifi_lora_32_V2.menu.PartitionScheme.no_ota.build.partitions=no_ota
heltec_wifi_lora_32_V2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
heltec_wifi_lora_32_V2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
heltec_wifi_lora_32_V2.menu.PartitionScheme.huge_app.build.partitions=huge_app
heltec_wifi_lora_32_V2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
heltec_wifi_lora_32_V2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
heltec_wifi_lora_32_V2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
heltec_wifi_lora_32_V2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
heltec_wifi_lora_32_V2.menu.PartitionScheme.fatflash=16M Fat
heltec_wifi_lora_32_V2.menu.PartitionScheme.fatflash.build.partitions=ffat
heltec_wifi_lora_32_V2.menu.CPUFreq.240=240MHz (WiFi/BT)
heltec_wifi_lora_32_V2.menu.CPUFreq.240.build.f_cpu=240000000L
heltec_wifi_lora_32_V2.menu.CPUFreq.160=160MHz (WiFi/BT)
heltec_wifi_lora_32_V2.menu.CPUFreq.160.build.f_cpu=160000000L
heltec_wifi_lora_32_V2.menu.CPUFreq.80=80MHz (WiFi/BT)
heltec_wifi_lora_32_V2.menu.CPUFreq.80.build.f_cpu=80000000L
heltec_wifi_lora_32_V2.menu.CPUFreq.40=40MHz (40MHz XTAL)
heltec_wifi_lora_32_V2.menu.CPUFreq.40.build.f_cpu=40000000L
heltec_wifi_lora_32_V2.menu.CPUFreq.20=20MHz (40MHz XTAL)
heltec_wifi_lora_32_V2.menu.CPUFreq.20.build.f_cpu=20000000L
heltec_wifi_lora_32_V2.menu.CPUFreq.10=10MHz (40MHz XTAL)
heltec_wifi_lora_32_V2.menu.CPUFreq.10.build.f_cpu=10000000L
heltec_wifi_lora_32_V2.menu.FlashMode.qio=QIO
heltec_wifi_lora_32_V2.menu.FlashMode.qio.build.flash_mode=dio
heltec_wifi_lora_32_V2.menu.FlashMode.qio.build.boot=qio
heltec_wifi_lora_32_V2.menu.FlashMode.dio=DIO
heltec_wifi_lora_32_V2.menu.FlashMode.dio.build.flash_mode=dio
heltec_wifi_lora_32_V2.menu.FlashMode.dio.build.boot=dio
heltec_wifi_lora_32_V2.menu.FlashMode.qout=QOUT
heltec_wifi_lora_32_V2.menu.FlashMode.qout.build.flash_mode=dout
heltec_wifi_lora_32_V2.menu.FlashMode.qout.build.boot=qout
heltec_wifi_lora_32_V2.menu.FlashMode.dout=DOUT
heltec_wifi_lora_32_V2.menu.FlashMode.dout.build.flash_mode=dout
heltec_wifi_lora_32_V2.menu.FlashMode.dout.build.boot=dout
heltec_wifi_lora_32_V2.menu.FlashFreq.80=80MHz
heltec_wifi_lora_32_V2.menu.FlashFreq.80.build.flash_freq=80m
heltec_wifi_lora_32_V2.menu.FlashFreq.40=40MHz
heltec_wifi_lora_32_V2.menu.FlashFreq.40.build.flash_freq=40m
heltec_wifi_lora_32_V2.menu.FlashSize.8M=8MB (64Mb)
heltec_wifi_lora_32_V2.menu.FlashSize.8M.build.flash_size=8MB
Update boards.txt (#2933) * Update boards.txt Adding ESP32-WROOM-32 8MB flash option * Update boards.txt Fixing partition size and typo * Update boards.txt
2019-07-10 08:13:09 +02:00
heltec_wifi_lora_32_V2.menu.FlashSize.8M.build.partitions=default_8MB
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wifi_lora_32_V2.menu.FlashSize.4M=4MB (32Mb)
heltec_wifi_lora_32_V2.menu.FlashSize.4M.build.flash_size=4MB
heltec_wifi_lora_32_V2.menu.FlashSize.2M=2MB (16Mb)
heltec_wifi_lora_32_V2.menu.FlashSize.2M.build.flash_size=2MB
heltec_wifi_lora_32_V2.menu.FlashSize.2M.build.partitions=minimal
heltec_wifi_lora_32_V2.menu.FlashSize.16M=16MB (128Mb)
heltec_wifi_lora_32_V2.menu.FlashSize.16M.build.flash_size=16MB
heltec_wifi_lora_32_V2.menu.FlashSize.16M.build.partitions=ffat
heltec_wifi_lora_32_V2.menu.UploadSpeed.921600=921600
heltec_wifi_lora_32_V2.menu.UploadSpeed.921600.upload.speed=921600
heltec_wifi_lora_32_V2.menu.UploadSpeed.115200=115200
heltec_wifi_lora_32_V2.menu.UploadSpeed.115200.upload.speed=115200
heltec_wifi_lora_32_V2.menu.UploadSpeed.256000.windows=256000
heltec_wifi_lora_32_V2.menu.UploadSpeed.256000.upload.speed=256000
heltec_wifi_lora_32_V2.menu.UploadSpeed.230400.windows.upload.speed=256000
heltec_wifi_lora_32_V2.menu.UploadSpeed.230400=230400
heltec_wifi_lora_32_V2.menu.UploadSpeed.230400.upload.speed=230400
heltec_wifi_lora_32_V2.menu.UploadSpeed.460800.linux=460800
heltec_wifi_lora_32_V2.menu.UploadSpeed.460800.macosx=460800
heltec_wifi_lora_32_V2.menu.UploadSpeed.460800.upload.speed=460800
heltec_wifi_lora_32_V2.menu.UploadSpeed.512000.windows=512000
heltec_wifi_lora_32_V2.menu.UploadSpeed.512000.upload.speed=512000
heltec_wifi_lora_32_V2.menu.DebugLevel.none=None
heltec_wifi_lora_32_V2.menu.DebugLevel.none.build.code_debug=0
heltec_wifi_lora_32_V2.menu.DebugLevel.error=Error
heltec_wifi_lora_32_V2.menu.DebugLevel.error.build.code_debug=1
heltec_wifi_lora_32_V2.menu.DebugLevel.warn=Warn
heltec_wifi_lora_32_V2.menu.DebugLevel.warn.build.code_debug=2
heltec_wifi_lora_32_V2.menu.DebugLevel.info=Info
heltec_wifi_lora_32_V2.menu.DebugLevel.info.build.code_debug=3
heltec_wifi_lora_32_V2.menu.DebugLevel.debug=Debug
heltec_wifi_lora_32_V2.menu.DebugLevel.debug.build.code_debug=4
heltec_wifi_lora_32_V2.menu.DebugLevel.verbose=Verbose
heltec_wifi_lora_32_V2.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
heltec_wireless_stick.name=Heltec Wireless Stick
heltec_wireless_stick.upload.tool=esptool_py
heltec_wireless_stick.upload.maximum_size=1310720
heltec_wireless_stick.upload.maximum_data_size=327680
heltec_wireless_stick.upload.wait_for_upload_port=true
heltec_wireless_stick.serial.disableDTR=true
heltec_wireless_stick.serial.disableRTS=true
heltec_wireless_stick.build.mcu=esp32
heltec_wireless_stick.build.core=esp32
heltec_wireless_stick.build.variant=heltec_wireless_stick
heltec_wireless_stick.build.board=HELTEC_WIRELESS_STICK
heltec_wireless_stick.build.f_cpu=240000000L
heltec_wireless_stick.build.flash_size=8MB
heltec_wireless_stick.build.flash_freq=40m
heltec_wireless_stick.build.flash_mode=dio
heltec_wireless_stick.build.boot=dio
heltec_wireless_stick.build.partitions=default_8MB
heltec_wireless_stick.build.defines=
heltec_wireless_stick.menu.PSRAM.disabled=Disabled
heltec_wireless_stick.menu.PSRAM.disabled.build.defines=
heltec_wireless_stick.menu.PSRAM.enabled=Enabled
heltec_wireless_stick.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
heltec_wireless_stick.menu.PartitionScheme.default=default_8MB
heltec_wireless_stick.menu.PartitionScheme.default.build.partitions=default_8MB
Fix wrong values in .cvs files (#3196) * Fix wrong values in .cvs files Add missing upload size for partitions bigger than default one * Add new partion to generic Fix hardcoded partition for 16M flash
2019-09-10 21:52:51 +02:00
heltec_wireless_stick.menu.PartitionScheme.default.upload.maximum_size=3342336
Add Heltec boards defintion and update board menu chooices (#2475)
2019-03-03 15:47:47 +01:00
heltec_wireless_stick.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
heltec_wireless_stick.menu.PartitionScheme.minimal.build.partitions=minimal
heltec_wireless_stick.menu.PartitionScheme.no_ota=No OTA (Large APP)
heltec_wireless_stick.menu.PartitionScheme.no_ota.build.partitions=no_ota
heltec_wireless_stick.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
heltec_wireless_stick.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
heltec_wireless_stick.menu.PartitionScheme.huge_app.build.partitions=huge_app
heltec_wireless_stick.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
heltec_wireless_stick.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
heltec_wireless_stick.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
heltec_wireless_stick.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
heltec_wireless_stick.menu.PartitionScheme.fatflash=16M Fat
heltec_wireless_stick.menu.PartitionScheme.fatflash.build.partitions=ffat
heltec_wireless_stick.menu.CPUFreq.240=240MHz (WiFi/BT)
heltec_wireless_stick.menu.CPUFreq.240.build.f_cpu=240000000L
heltec_wireless_stick.menu.CPUFreq.160=160MHz (WiFi/BT)
heltec_wireless_stick.menu.CPUFreq.160.build.f_cpu=160000000L
heltec_wireless_stick.menu.CPUFreq.80=80MHz (WiFi/BT)
heltec_wireless_stick.menu.CPUFreq.80.build.f_cpu=80000000L
heltec_wireless_stick.menu.CPUFreq.40=40MHz (40MHz XTAL)
heltec_wireless_stick.menu.CPUFreq.40.build.f_cpu=40000000L
heltec_wireless_stick.menu.CPUFreq.20=20MHz (40MHz XTAL)
heltec_wireless_stick.menu.CPUFreq.20.build.f_cpu=20000000L
heltec_wireless_stick.menu.CPUFreq.10=10MHz (40MHz XTAL)
heltec_wireless_stick.menu.CPUFreq.10.build.f_cpu=10000000L
heltec_wireless_stick.menu.FlashMode.qio=QIO
heltec_wireless_stick.menu.FlashMode.qio.build.flash_mode=dio
heltec_wireless_stick.menu.FlashMode.qio.build.boot=qio
heltec_wireless_stick.menu.FlashMode.dio=DIO
heltec_wireless_stick.menu.FlashMode.dio.build.flash_mode=dio
heltec_wireless_stick.menu.FlashMode.dio.build.boot=dio
heltec_wireless_stick.menu.FlashMode.qout=QOUT
heltec_wireless_stick.menu.FlashMode.qout.build.flash_mode=dout
heltec_wireless_stick.menu.FlashMode.qout.build.boot=qout
heltec_wireless_stick.menu.FlashMode.dout=DOUT
heltec_wireless_stick.menu.FlashMode.dout.build.flash_mode=dout
heltec_wireless_stick.menu.FlashMode.dout.build.boot=dout
heltec_wireless_stick.menu.FlashFreq.80=80MHz
heltec_wireless_stick.menu.FlashFreq.80.build.flash_freq=80m
heltec_wireless_stick.menu.FlashFreq.40=40MHz
heltec_wireless_stick.menu.FlashFreq.40.build.flash_freq=40m
heltec_wireless_stick.menu.FlashSize.8M=8MB (64Mb)
heltec_wireless_stick.menu.FlashSize.8M.build.flash_size=8MB
heltec_wireless_stick.menu.FlashSize.2M.build.partitions=default_8MB
heltec_wireless_stick.menu.FlashSize.4M=4MB (32Mb)
heltec_wireless_stick.menu.FlashSize.4M.build.flash_size=4MB
heltec_wireless_stick.menu.FlashSize.2M=2MB (16Mb)
heltec_wireless_stick.menu.FlashSize.2M.build.flash_size=2MB
heltec_wireless_stick.menu.FlashSize.2M.build.partitions=minimal
heltec_wireless_stick.menu.FlashSize.16M=16MB (128Mb)
heltec_wireless_stick.menu.FlashSize.16M.build.flash_size=16MB
heltec_wireless_stick.menu.FlashSize.16M.build.partitions=ffat
heltec_wireless_stick.menu.UploadSpeed.921600=921600
heltec_wireless_stick.menu.UploadSpeed.921600.upload.speed=921600
heltec_wireless_stick.menu.UploadSpeed.115200=115200
heltec_wireless_stick.menu.UploadSpeed.115200.upload.speed=115200
heltec_wireless_stick.menu.UploadSpeed.256000.windows=256000
heltec_wireless_stick.menu.UploadSpeed.256000.upload.speed=256000
heltec_wireless_stick.menu.UploadSpeed.230400.windows.upload.speed=256000
heltec_wireless_stick.menu.UploadSpeed.230400=230400
heltec_wireless_stick.menu.UploadSpeed.230400.upload.speed=230400
heltec_wireless_stick.menu.UploadSpeed.460800.linux=460800
heltec_wireless_stick.menu.UploadSpeed.460800.macosx=460800
heltec_wireless_stick.menu.UploadSpeed.460800.upload.speed=460800
heltec_wireless_stick.menu.UploadSpeed.512000.windows=512000
heltec_wireless_stick.menu.UploadSpeed.512000.upload.speed=512000
heltec_wireless_stick.menu.DebugLevel.none=None
heltec_wireless_stick.menu.DebugLevel.none.build.code_debug=0
heltec_wireless_stick.menu.DebugLevel.error=Error
heltec_wireless_stick.menu.DebugLevel.error.build.code_debug=1
heltec_wireless_stick.menu.DebugLevel.warn=Warn
heltec_wireless_stick.menu.DebugLevel.warn.build.code_debug=2
heltec_wireless_stick.menu.DebugLevel.info=Info
heltec_wireless_stick.menu.DebugLevel.info.build.code_debug=3
heltec_wireless_stick.menu.DebugLevel.debug=Debug
heltec_wireless_stick.menu.DebugLevel.debug.build.code_debug=4
heltec_wireless_stick.menu.DebugLevel.verbose=Verbose
heltec_wireless_stick.menu.DebugLevel.verbose.build.code_debug=5
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
##############################################################
espectro32.name=ESPectro32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
espectro32.upload.tool=esptool_py
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
espectro32.upload.maximum_data_size=327680
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.upload.wait_for_upload_port=true
espectro32.serial.disableDTR=true
espectro32.serial.disableRTS=true
espectro32.build.mcu=esp32
espectro32.build.core=esp32
espectro32.build.variant=espectro32
espectro32.build.board=ESPECTRO32
espectro32.build.f_cpu=240000000L
espectro32.build.flash_size=4MB
espectro32.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.build.boot=dio
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
espectro32.build.defines=
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.qio=QIO
espectro32.menu.FlashMode.qio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.qio.build.boot=qio
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.dio=DIO
espectro32.menu.FlashMode.dio.build.flash_mode=dio
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.dio.build.boot=dio
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.qout=QOUT
espectro32.menu.FlashMode.qout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.qout.build.boot=qout
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashMode.dout=DOUT
espectro32.menu.FlashMode.dout.build.flash_mode=dout
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
espectro32.menu.FlashMode.dout.build.boot=dout
Add ESPectro32 board definition (#586) * Add board definition for espectro32 * Fix ESPectro32 board definition
2017-08-20 06:24:47 +02:00
espectro32.menu.FlashFreq.80=80MHz
espectro32.menu.FlashFreq.80.build.flash_freq=80m
espectro32.menu.FlashFreq.40=40MHz
espectro32.menu.FlashFreq.40.build.flash_freq=40m
espectro32.menu.FlashSize.4M=4MB (32Mb)
espectro32.menu.FlashSize.4M.build.flash_size=4MB
espectro32.menu.FlashSize.2M=2MB (16Mb)
espectro32.menu.FlashSize.2M.build.flash_size=2MB
espectro32.menu.FlashSize.2M.build.partitions=minimal
espectro32.menu.UploadSpeed.921600=921600
espectro32.menu.UploadSpeed.921600.upload.speed=921600
espectro32.menu.UploadSpeed.115200=115200
espectro32.menu.UploadSpeed.115200.upload.speed=115200
espectro32.menu.UploadSpeed.256000.windows=256000
espectro32.menu.UploadSpeed.256000.upload.speed=256000
espectro32.menu.UploadSpeed.230400.windows.upload.speed=256000
espectro32.menu.UploadSpeed.230400=230400
espectro32.menu.UploadSpeed.230400.upload.speed=230400
espectro32.menu.UploadSpeed.460800.linux=460800
espectro32.menu.UploadSpeed.460800.macosx=460800
espectro32.menu.UploadSpeed.460800.upload.speed=460800
espectro32.menu.UploadSpeed.512000.windows=512000
espectro32.menu.UploadSpeed.512000.upload.speed=512000
espectro32.menu.DebugLevel.none=None
espectro32.menu.DebugLevel.none.build.code_debug=0
espectro32.menu.DebugLevel.error=Error
espectro32.menu.DebugLevel.error.build.code_debug=1
espectro32.menu.DebugLevel.warn=Warn
espectro32.menu.DebugLevel.warn.build.code_debug=2
espectro32.menu.DebugLevel.info=Info
espectro32.menu.DebugLevel.info.build.code_debug=3
espectro32.menu.DebugLevel.debug=Debug
espectro32.menu.DebugLevel.debug.build.code_debug=4
espectro32.menu.DebugLevel.verbose=Verbose
espectro32.menu.DebugLevel.verbose.build.code_debug=5
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
##############################################################
CoreESP32.name=Microduino-CoreESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
CoreESP32.upload.tool=esptool_py
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.upload.maximum_size=1310720
Adjust RAM size and calculator
2018-06-27 21:01:31 +02:00
CoreESP32.upload.maximum_data_size=327680
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.upload.wait_for_upload_port=true
update coreESP32 boards.txt (#3569)
2020-01-20 15:06:55 +01:00
CoreESP32.serial.disableDTR=false
CoreESP32.serial.disableRTS=false
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.build.mcu=esp32
CoreESP32.build.core=esp32
CoreESP32.build.variant=Microduino-esp32
CoreESP32.build.board=CoreESP32
CoreESP32.build.f_cpu=240000000L
CoreESP32.build.flash_mode=dio
CoreESP32.build.flash_size=4MB
Fix bootloaders for different flash configs fixes: https://github.com/espressif/arduino-esp32/issues/867
2017-11-24 19:51:48 +01:00
CoreESP32.build.boot=dio
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
CoreESP32.build.defines=
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
update coreESP32 boards.txt (#3569)
2020-01-20 15:06:55 +01:00
CoreESP32.menu.PSRAM.disabled=Disabled
CoreESP32.menu.PSRAM.disabled.build.defines=
CoreESP32.menu.PSRAM.enabled=Enabled
CoreESP32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
CoreESP32.menu.PartitionScheme.default=Default
CoreESP32.menu.PartitionScheme.default.build.partitions=default
CoreESP32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
CoreESP32.menu.PartitionScheme.minimal.build.partitions=minimal
CoreESP32.menu.PartitionScheme.no_ota=No OTA (Large APP)
CoreESP32.menu.PartitionScheme.no_ota.build.partitions=no_ota
CoreESP32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
CoreESP32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
CoreESP32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
CoreESP32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
CoreESP32.menu.PartitionScheme.fatflash=16M Fat
CoreESP32.menu.PartitionScheme.fatflash.build.partitions=ffat
add Microduino-esp32 (#621)
2017-09-11 16:47:28 +02:00
CoreESP32.menu.FlashFreq.80=80MHz
CoreESP32.menu.FlashFreq.80.build.flash_freq=80m
CoreESP32.menu.FlashFreq.40=40MHz
CoreESP32.menu.FlashFreq.40.build.flash_freq=40m
CoreESP32.menu.UploadSpeed.921600=921600
CoreESP32.menu.UploadSpeed.921600.upload.speed=921600
CoreESP32.menu.UploadSpeed.115200=115200
CoreESP32.menu.UploadSpeed.115200.upload.speed=115200
CoreESP32.menu.UploadSpeed.256000.windows=256000
CoreESP32.menu.UploadSpeed.256000.upload.speed=256000
CoreESP32.menu.UploadSpeed.230400.windows.upload.speed=256000
CoreESP32.menu.UploadSpeed.230400=230400
CoreESP32.menu.UploadSpeed.230400.upload.speed=230400
CoreESP32.menu.UploadSpeed.460800.linux=460800
CoreESP32.menu.UploadSpeed.460800.macosx=460800
CoreESP32.menu.UploadSpeed.460800.upload.speed=460800
CoreESP32.menu.UploadSpeed.512000.windows=512000
Add new target u-blox nina-w10 (#771) * Update boards.txt * Create pins_arduino.h
2017-10-25 12:11:01 +02:00
CoreESP32.menu.UploadSpeed.512000.upload.speed=512000
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
update coreESP32 boards.txt (#3569)
2020-01-20 15:06:55 +01:00
CoreESP32.menu.DebugLevel.none=None
CoreESP32.menu.DebugLevel.none.build.code_debug=0
CoreESP32.menu.DebugLevel.error=Error
CoreESP32.menu.DebugLevel.error.build.code_debug=1
CoreESP32.menu.DebugLevel.warn=Warn
CoreESP32.menu.DebugLevel.warn.build.code_debug=2
CoreESP32.menu.DebugLevel.info=Info
CoreESP32.menu.DebugLevel.info.build.code_debug=3
CoreESP32.menu.DebugLevel.debug=Debug
CoreESP32.menu.DebugLevel.debug.build.code_debug=4
CoreESP32.menu.DebugLevel.verbose=Verbose
CoreESP32.menu.DebugLevel.verbose.build.code_debug=5
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
##############################################################
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.name=ALKS ESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
alksesp32.upload.tool=esptool_py
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.upload.maximum_size=1310720
alksesp32.upload.maximum_data_size=327680
alksesp32.upload.wait_for_upload_port=true
alksesp32.serial.disableDTR=true
alksesp32.serial.disableRTS=true
alksesp32.build.mcu=esp32
alksesp32.build.core=esp32
alksesp32.build.variant=alksesp32
alksesp32.build.board=ALKS
alksesp32.build.f_cpu=240000000L
alksesp32.build.flash_size=4MB
alksesp32.build.flash_freq=40m
alksesp32.build.flash_mode=dio
alksesp32.build.boot=dio
alksesp32.build.partitions=default
alksesp32.build.defines=
Update ALKS board (#2694)
2019-04-23 09:52:24 +02:00
alksesp32.menu.PSRAM.disabled=Disabled
alksesp32.menu.PSRAM.disabled.build.defines=
alksesp32.menu.PSRAM.enabled=Enabled
alksesp32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
alksesp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.menu.PartitionScheme.default.build.partitions=default
Update ALKS board (#2694)
2019-04-23 09:52:24 +02:00
alksesp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
alksesp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
alksesp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.menu.PartitionScheme.minimal.build.partitions=minimal
Update ALKS board (#2694)
2019-04-23 09:52:24 +02:00
alksesp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
alksesp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
Update ALKS board (#2694)
2019-04-23 09:52:24 +02:00
alksesp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
alksesp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
alksesp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
alksesp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
alksesp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
alksesp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
alksesp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
alksesp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
alksesp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
alksesp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
alksesp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
alksesp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
alksesp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
alksesp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Update ALKS board (#2694)
2019-04-23 09:52:24 +02:00
alksesp32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
alksesp32.menu.PartitionScheme.fatflash.build.partitions=ffat
alksesp32.menu.CPUFreq.240=240MHz (WiFi/BT)
alksesp32.menu.CPUFreq.240.build.f_cpu=240000000L
alksesp32.menu.CPUFreq.160=160MHz (WiFi/BT)
alksesp32.menu.CPUFreq.160.build.f_cpu=160000000L
alksesp32.menu.CPUFreq.80=80MHz (WiFi/BT)
alksesp32.menu.CPUFreq.80.build.f_cpu=80000000L
alksesp32.menu.CPUFreq.40=40MHz (40MHz XTAL)
alksesp32.menu.CPUFreq.40.build.f_cpu=40000000L
alksesp32.menu.CPUFreq.26=26MHz (26MHz XTAL)
alksesp32.menu.CPUFreq.26.build.f_cpu=26000000L
alksesp32.menu.CPUFreq.20=20MHz (40MHz XTAL)
alksesp32.menu.CPUFreq.20.build.f_cpu=20000000L
alksesp32.menu.CPUFreq.13=13MHz (26MHz XTAL)
alksesp32.menu.CPUFreq.13.build.f_cpu=13000000L
alksesp32.menu.CPUFreq.10=10MHz (40MHz XTAL)
alksesp32.menu.CPUFreq.10.build.f_cpu=10000000L
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.menu.FlashMode.qio=QIO
alksesp32.menu.FlashMode.qio.build.flash_mode=dio
alksesp32.menu.FlashMode.qio.build.boot=qio
alksesp32.menu.FlashMode.dio=DIO
alksesp32.menu.FlashMode.dio.build.flash_mode=dio
alksesp32.menu.FlashMode.dio.build.boot=dio
alksesp32.menu.FlashMode.qout=QOUT
alksesp32.menu.FlashMode.qout.build.flash_mode=dout
alksesp32.menu.FlashMode.qout.build.boot=qout
alksesp32.menu.FlashMode.dout=DOUT
alksesp32.menu.FlashMode.dout.build.flash_mode=dout
alksesp32.menu.FlashMode.dout.build.boot=dout
alksesp32.menu.FlashFreq.80=80MHz
alksesp32.menu.FlashFreq.80.build.flash_freq=80m
alksesp32.menu.FlashFreq.40=40MHz
alksesp32.menu.FlashFreq.40.build.flash_freq=40m
alksesp32.menu.FlashSize.4M=4MB (32Mb)
alksesp32.menu.FlashSize.4M.build.flash_size=4MB
alksesp32.menu.FlashSize.2M=2MB (16Mb)
alksesp32.menu.FlashSize.2M.build.flash_size=2MB
alksesp32.menu.FlashSize.2M.build.partitions=minimal
Update ALKS board (#2694)
2019-04-23 09:52:24 +02:00
alksesp32.menu.FlashSize.16M=16MB (128Mb)
alksesp32.menu.FlashSize.16M.build.flash_size=16MB
alksesp32.menu.FlashSize.16M.build.partitions=ffat
Add ALKS board variant (#1643) * Initial support for ALKS variant
2018-07-16 20:43:35 +02:00
alksesp32.menu.UploadSpeed.921600=921600
alksesp32.menu.UploadSpeed.921600.upload.speed=921600
alksesp32.menu.UploadSpeed.115200=115200
alksesp32.menu.UploadSpeed.115200.upload.speed=115200
alksesp32.menu.UploadSpeed.256000.windows=256000
alksesp32.menu.UploadSpeed.256000.upload.speed=256000
alksesp32.menu.UploadSpeed.230400.windows.upload.speed=256000
alksesp32.menu.UploadSpeed.230400=230400
alksesp32.menu.UploadSpeed.230400.upload.speed=230400
alksesp32.menu.UploadSpeed.460800.linux=460800
alksesp32.menu.UploadSpeed.460800.macosx=460800
alksesp32.menu.UploadSpeed.460800.upload.speed=460800
alksesp32.menu.UploadSpeed.512000.windows=512000
alksesp32.menu.UploadSpeed.512000.upload.speed=512000
alksesp32.menu.DebugLevel.none=None
alksesp32.menu.DebugLevel.none.build.code_debug=0
alksesp32.menu.DebugLevel.error=Error
alksesp32.menu.DebugLevel.error.build.code_debug=1
alksesp32.menu.DebugLevel.warn=Warn
alksesp32.menu.DebugLevel.warn.build.code_debug=2
alksesp32.menu.DebugLevel.info=Info
alksesp32.menu.DebugLevel.info.build.code_debug=3
alksesp32.menu.DebugLevel.debug=Debug
alksesp32.menu.DebugLevel.debug.build.code_debug=4
alksesp32.menu.DebugLevel.verbose=Verbose
alksesp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
wipy3.name=WiPy 3.0
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
wipy3.upload.tool=esptool_py
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
wipy3.upload.maximum_size=1310720
wipy3.upload.maximum_data_size=294912
wipy3.upload.wait_for_upload_port=true
wipy3.serial.disableDTR=true
wipy3.serial.disableRTS=true
wipy3.build.mcu=esp32
wipy3.build.core=esp32
wipy3.build.variant=wipy3
wipy3.build.board=WIPY3
wipy3.build.f_cpu=240000000L
wipy3.build.flash_mode=dio
wipy3.build.flash_size=8MB
wipy3.build.boot=dio
wipy3.build.partitions=default
Add Wrover Support and Option to enable SPIRAM
2018-07-03 23:03:50 +02:00
wipy3.build.defines=
Added WiPy 3.0 board (#1572)
2018-07-02 18:23:06 +02:00
wipy3.menu.FlashFreq.80=80MHz
wipy3.menu.FlashFreq.80.build.flash_freq=80m
wipy3.menu.FlashFreq.40=40MHz
wipy3.menu.FlashFreq.40.build.flash_freq=40m
wipy3.menu.UploadSpeed.921600=921600
wipy3.menu.UploadSpeed.921600.upload.speed=921600
wipy3.menu.UploadSpeed.115200=115200
wipy3.menu.UploadSpeed.115200.upload.speed=115200
wipy3.menu.UploadSpeed.256000.windows=256000
wipy3.menu.UploadSpeed.256000.upload.speed=256000
wipy3.menu.UploadSpeed.230400.windows.upload.speed=256000
wipy3.menu.UploadSpeed.230400=230400
wipy3.menu.UploadSpeed.230400.upload.speed=230400
wipy3.menu.UploadSpeed.460800.linux=460800
wipy3.menu.UploadSpeed.460800.macosx=460800
wipy3.menu.UploadSpeed.460800.upload.speed=460800
wipy3.menu.UploadSpeed.512000.windows=512000
wipy3.menu.UploadSpeed.512000.upload.speed=512000
wipy3.menu.DebugLevel.none=None
wipy3.menu.DebugLevel.none.build.code_debug=0
wipy3.menu.DebugLevel.error=Error
wipy3.menu.DebugLevel.error.build.code_debug=1
wipy3.menu.DebugLevel.warn=Warn
wipy3.menu.DebugLevel.warn.build.code_debug=2
wipy3.menu.DebugLevel.info=Info
wipy3.menu.DebugLevel.info.build.code_debug=3
wipy3.menu.DebugLevel.debug=Debug
wipy3.menu.DebugLevel.debug.build.code_debug=4
wipy3.menu.DebugLevel.verbose=Verbose
Add TTGO LoRa32 with OLED Version 1.x Board (#1663) * Add ttgo-lora32-v1 folder to variants folder * Add ttgo-lora32-v1 info to boards.txt * Add defs to pins_arduino.h for I2C OLED and SPI LoRa radio pinouts as per @stickbreaker
2018-07-24 19:49:38 +02:00
wipy3.menu.DebugLevel.verbose.build.code_debug=5
Add T-Beam Board Support (#1852)
2018-09-17 21:19:02 +02:00
##############################################################
Add BananaPi-BIT Development Board Support (#1810) * Add BPI-BIT boards connfig * Add BPI-BIT v1.3 boards
2018-09-17 22:32:14 +02:00
bpi-bit.name=BPI-BIT
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
bpi-bit.upload.tool=esptool_py
Add BananaPi-BIT Development Board Support (#1810) * Add BPI-BIT boards connfig * Add BPI-BIT v1.3 boards
2018-09-17 22:32:14 +02:00
bpi-bit.upload.maximum_size=1310720
bpi-bit.upload.maximum_data_size=294912
bpi-bit.upload.wait_for_upload_port=true
bpi-bit.serial.disableDTR=true
bpi-bit.serial.disableRTS=true
bpi-bit.build.mcu=esp32
bpi-bit.build.core=esp32
bpi-bit.build.variant=bpi-bit
bpi-bit.build.board=BPI-BIT
bpi-bit.build.f_cpu=160000000L
bpi-bit.build.flash_mode=dio
bpi-bit.build.flash_size=4MB
bpi-bit.build.boot=dio
bpi-bit.build.partitions=default
bpi-bit.menu.FlashFreq.80=80MHz
bpi-bit.menu.FlashFreq.80.build.flash_freq=80m
bpi-bit.menu.FlashFreq.40=40MHz
bpi-bit.menu.FlashFreq.40.build.flash_freq=40m
bpi-bit.menu.UploadSpeed.921600=921600
bpi-bit.menu.UploadSpeed.921600.upload.speed=921600
bpi-bit.menu.UploadSpeed.115200=115200
bpi-bit.menu.UploadSpeed.115200.upload.speed=115200
bpi-bit.menu.UploadSpeed.256000.windows=256000
bpi-bit.menu.UploadSpeed.256000.upload.speed=256000
bpi-bit.menu.UploadSpeed.230400.windows.upload.speed=256000
bpi-bit.menu.UploadSpeed.230400=230400
bpi-bit.menu.UploadSpeed.230400.upload.speed=230400
bpi-bit.menu.UploadSpeed.460800.linux=460800
bpi-bit.menu.UploadSpeed.460800.macosx=460800
bpi-bit.menu.UploadSpeed.460800.upload.speed=460800
bpi-bit.menu.UploadSpeed.512000.windows=512000
bpi-bit.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
wesp32.name=Silicognition wESP32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
wesp32.upload.tool=esptool_py
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
wesp32.upload.maximum_size=1310720
wesp32.upload.maximum_data_size=327680
wesp32.upload.wait_for_upload_port=true
wesp32.serial.disableDTR=true
wesp32.serial.disableRTS=true
wesp32.build.mcu=esp32
wesp32.build.core=esp32
wesp32.build.variant=wesp32
wesp32.build.board=WESP32
wesp32.build.f_cpu=240000000L
wesp32.build.flash_mode=dio
wesp32.build.flash_size=4MB
wesp32.build.boot=dio
wesp32.build.partitions=default
wesp32.build.defines=
wesp32.menu.FlashFreq.80=80MHz
wesp32.menu.FlashFreq.80.build.flash_freq=80m
wesp32.menu.FlashFreq.40=40MHz
wesp32.menu.FlashFreq.40.build.flash_freq=40m
wesp32.menu.UploadSpeed.921600=921600
wesp32.menu.UploadSpeed.921600.upload.speed=921600
wesp32.menu.UploadSpeed.115200=115200
wesp32.menu.UploadSpeed.115200.upload.speed=115200
wesp32.menu.UploadSpeed.256000.windows=256000
wesp32.menu.UploadSpeed.256000.upload.speed=256000
wesp32.menu.UploadSpeed.230400.windows.upload.speed=256000
wesp32.menu.UploadSpeed.230400=230400
wesp32.menu.UploadSpeed.230400.upload.speed=230400
wesp32.menu.UploadSpeed.460800.linux=460800
wesp32.menu.UploadSpeed.460800.macosx=460800
wesp32.menu.UploadSpeed.460800.upload.speed=460800
wesp32.menu.UploadSpeed.512000.windows=512000
wesp32.menu.UploadSpeed.512000.upload.speed=512000
wesp32.menu.DebugLevel.none=None
wesp32.menu.DebugLevel.none.build.code_debug=0
wesp32.menu.DebugLevel.error=Error
wesp32.menu.DebugLevel.error.build.code_debug=1
wesp32.menu.DebugLevel.warn=Warn
wesp32.menu.DebugLevel.warn.build.code_debug=2
wesp32.menu.DebugLevel.info=Info
wesp32.menu.DebugLevel.info.build.code_debug=3
wesp32.menu.DebugLevel.debug=Debug
wesp32.menu.DebugLevel.debug.build.code_debug=4
wesp32.menu.DebugLevel.verbose=Verbose
wesp32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add T-Beam Board Support (#1852)
2018-09-17 21:19:02 +02:00
t-beam.name=T-Beam
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
t-beam.upload.tool=esptool_py
Add T-Beam Board Support (#1852)
2018-09-17 21:19:02 +02:00
t-beam.upload.maximum_size=1310720
t-beam.upload.maximum_data_size=327680
t-beam.upload.wait_for_upload_port=true
t-beam.serial.disableDTR=true
t-beam.serial.disableRTS=true
t-beam.build.mcu=esp32
t-beam.build.core=esp32
t-beam.build.variant=t-beam
t-beam.build.board=T-Beam
t-beam.build.f_cpu=240000000L
t-beam.build.flash_mode=dio
t-beam.build.flash_size=4MB
t-beam.build.boot=dio
t-beam.build.partitions=default
t-beam.menu.PSRAM.disabled=Disabled
t-beam.menu.PSRAM.disabled.build.defines=
t-beam.menu.PSRAM.enabled=Enabled
t-beam.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
t-beam.menu.FlashFreq.80=80MHz
t-beam.menu.FlashFreq.80.build.flash_freq=80m
t-beam.menu.FlashFreq.40=40MHz
t-beam.menu.FlashFreq.40.build.flash_freq=40m
t-beam.menu.UploadSpeed.921600=921600
t-beam.menu.UploadSpeed.921600.upload.speed=921600
t-beam.menu.UploadSpeed.115200=115200
t-beam.menu.UploadSpeed.115200.upload.speed=115200
t-beam.menu.UploadSpeed.256000.windows=256000
t-beam.menu.UploadSpeed.256000.upload.speed=256000
t-beam.menu.UploadSpeed.230400.windows.upload.speed=256000
t-beam.menu.UploadSpeed.230400=230400
t-beam.menu.UploadSpeed.230400.upload.speed=230400
t-beam.menu.UploadSpeed.460800.linux=460800
t-beam.menu.UploadSpeed.460800.macosx=460800
t-beam.menu.UploadSpeed.460800.upload.speed=460800
t-beam.menu.UploadSpeed.512000.windows=512000
t-beam.menu.UploadSpeed.512000.upload.speed=512000
t-beam.menu.DebugLevel.none=None
t-beam.menu.DebugLevel.none.build.code_debug=0
t-beam.menu.DebugLevel.error=Error
t-beam.menu.DebugLevel.error.build.code_debug=1
t-beam.menu.DebugLevel.warn=Warn
t-beam.menu.DebugLevel.warn.build.code_debug=2
t-beam.menu.DebugLevel.info=Info
t-beam.menu.DebugLevel.info.build.code_debug=3
t-beam.menu.DebugLevel.debug=Debug
t-beam.menu.DebugLevel.debug.build.code_debug=4
t-beam.menu.DebugLevel.verbose=Verbose
Add wESP32 support (#1821) * Add wESP32 support * Add default Ethernet config
2018-09-17 22:28:24 +02:00
t-beam.menu.DebugLevel.verbose.build.code_debug=5
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
##############################################################
adding D-duino-32 board/pins (#2030) * adding d-duino-32 board/pins, fixes #930 * remove OLED_RST
2018-11-19 19:29:57 +01:00
d-duino-32.name=D-duino-32
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
d-duino-32.upload.tool=esptool_py
adding D-duino-32 board/pins (#2030) * adding d-duino-32 board/pins, fixes #930 * remove OLED_RST
2018-11-19 19:29:57 +01:00
d-duino-32.upload.maximum_size=1310720
d-duino-32.upload.maximum_data_size=327680
d-duino-32.upload.wait_for_upload_port=true
d-duino-32.serial.disableDTR=true
d-duino-32.serial.disableRTS=true
d-duino-32.build.mcu=esp32
d-duino-32.build.core=esp32
d-duino-32.build.variant=d-duino-32
d-duino-32.build.board=D-duino-32
d-duino-32.build.f_cpu=240000000L
d-duino-32.build.flash_size=4MB
d-duino-32.build.flash_freq=40m
d-duino-32.build.flash_mode=dio
d-duino-32.build.boot=dio
d-duino-32.build.partitions=default
d-duino-32.build.defines=
d-duino-32.menu.PartitionScheme.default=Default
d-duino-32.menu.PartitionScheme.default.build.partitions=default
d-duino-32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
d-duino-32.menu.PartitionScheme.minimal.build.partitions=minimal
d-duino-32.menu.PartitionScheme.no_ota=No OTA (Large APP)
d-duino-32.menu.PartitionScheme.no_ota.build.partitions=no_ota
d-duino-32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
d-duino-32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
d-duino-32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
d-duino-32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
d-duino-32.menu.PartitionScheme.fatflash=16M Fat
d-duino-32.menu.PartitionScheme.fatflash.build.partitions=ffat
d-duino-32.menu.FlashFreq.80=80MHz
d-duino-32.menu.FlashFreq.80.build.flash_freq=80m
d-duino-32.menu.FlashFreq.40=40MHz
d-duino-32.menu.FlashFreq.40.build.flash_freq=40m
d-duino-32.menu.UploadSpeed.921600=921600
d-duino-32.menu.UploadSpeed.921600.upload.speed=921600
d-duino-32.menu.UploadSpeed.115200=115200
d-duino-32.menu.UploadSpeed.115200.upload.speed=115200
d-duino-32.menu.UploadSpeed.256000.windows=256000
d-duino-32.menu.UploadSpeed.256000.upload.speed=256000
d-duino-32.menu.UploadSpeed.230400.windows.upload.speed=256000
d-duino-32.menu.UploadSpeed.230400=230400
d-duino-32.menu.UploadSpeed.230400.upload.speed=230400
d-duino-32.menu.UploadSpeed.460800.linux=460800
d-duino-32.menu.UploadSpeed.460800.macosx=460800
d-duino-32.menu.UploadSpeed.460800.upload.speed=460800
d-duino-32.menu.UploadSpeed.512000.windows=512000
d-duino-32.menu.UploadSpeed.512000.upload.speed=512000
d-duino-32.menu.DebugLevel.none=None
d-duino-32.menu.DebugLevel.none.build.code_debug=0
d-duino-32.menu.DebugLevel.error=Error
d-duino-32.menu.DebugLevel.error.build.code_debug=1
d-duino-32.menu.DebugLevel.warn=Warn
d-duino-32.menu.DebugLevel.warn.build.code_debug=2
d-duino-32.menu.DebugLevel.info=Info
d-duino-32.menu.DebugLevel.info.build.code_debug=3
d-duino-32.menu.DebugLevel.debug=Debug
d-duino-32.menu.DebugLevel.debug.build.code_debug=4
d-duino-32.menu.DebugLevel.verbose=Verbose
d-duino-32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
lopy.name=LoPy
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
lopy.upload.tool=esptool_py
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
lopy.upload.maximum_size=1310720
lopy.upload.maximum_data_size=327680
lopy.upload.wait_for_upload_port=true
lopy.serial.disableDTR=true
lopy.serial.disableRTS=true
lopy.build.mcu=esp32
lopy.build.core=esp32
lopy.build.variant=lopy
lopy.build.board=LoPy
lopy.build.f_cpu=240000000L
lopy.build.flash_mode=dio
lopy.build.flash_size=4MB
lopy.build.boot=dio
lopy.build.partitions=default
lopy.menu.FlashFreq.80=80MHz
lopy.menu.FlashFreq.80.build.flash_freq=80m
lopy.menu.FlashFreq.40=40MHz
lopy.menu.FlashFreq.40.build.flash_freq=40m
lopy.menu.UploadSpeed.921600=921600
lopy.menu.UploadSpeed.921600.upload.speed=921600
lopy.menu.UploadSpeed.115200=115200
lopy.menu.UploadSpeed.115200.upload.speed=115200
lopy.menu.UploadSpeed.256000.windows=256000
lopy.menu.UploadSpeed.256000.upload.speed=256000
lopy.menu.UploadSpeed.230400.windows.upload.speed=256000
lopy.menu.UploadSpeed.230400=230400
lopy.menu.UploadSpeed.230400.upload.speed=230400
lopy.menu.UploadSpeed.460800.linux=460800
lopy.menu.UploadSpeed.460800.macosx=460800
lopy.menu.UploadSpeed.460800.upload.speed=460800
lopy.menu.UploadSpeed.512000.windows=512000
lopy.menu.UploadSpeed.512000.upload.speed=512000
lopy.menu.DebugLevel.none=None
lopy.menu.DebugLevel.none.build.code_debug=0
lopy.menu.DebugLevel.error=Error
lopy.menu.DebugLevel.error.build.code_debug=1
lopy.menu.DebugLevel.warn=Warn
lopy.menu.DebugLevel.warn.build.code_debug=2
lopy.menu.DebugLevel.info=Info
lopy.menu.DebugLevel.info.build.code_debug=3
lopy.menu.DebugLevel.debug=Debug
lopy.menu.DebugLevel.debug.build.code_debug=4
lopy.menu.DebugLevel.verbose=Verbose
lopy.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
lopy4.name=LoPy4
Update build tools (#2200)
2018-12-16 17:09:44 +01:00
lopy4.upload.tool=esptool_py
[Feature] Boards added: Pycom LoPy & LoPy4 (#1984) * Create pins_arduino.h * Update boards.txt Pycom LoPy + LoPy4 boards added * Create pins_arduino.h * Update pins_arduino.h bugfix antenna switch GPIO port 16 -> 21 * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update pins_arduino.h * Update boards.txt
2018-11-19 16:58:45 +01:00
lopy4.upload.maximum_size=1310720
lopy4.upload.maximum_data_size=327680
lopy4.upload.wait_for_upload_port=true
lopy4.serial.disableDTR=true
lopy4.serial.disableRTS=true
lopy4.build.mcu=esp32
lopy4.build.core=esp32
lopy4.build.variant=lopy4
lopy4.build.board=LoPy4
lopy4.build.f_cpu=240000000L
lopy4.build.flash_mode=dio
lopy4.build.flash_size=4MB
lopy4.build.boot=dio
lopy4.build.partitions=default
lopy4.menu.PSRAM.disabled=Disabled
lopy4.menu.PSRAM.disabled.build.defines=
lopy4.menu.PSRAM.enabled=Enabled
lopy4.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
lopy4.menu.FlashFreq.80=80MHz
lopy4.menu.FlashFreq.80.build.flash_freq=80m
lopy4.menu.FlashFreq.40=40MHz
lopy4.menu.FlashFreq.40.build.flash_freq=40m
lopy4.menu.UploadSpeed.921600=921600
lopy4.menu.UploadSpeed.921600.upload.speed=921600
lopy4.menu.UploadSpeed.115200=115200
lopy4.menu.UploadSpeed.115200.upload.speed=115200
lopy4.menu.UploadSpeed.256000.windows=256000
lopy4.menu.UploadSpeed.256000.upload.speed=256000
lopy4.menu.UploadSpeed.230400.windows.upload.speed=256000
lopy4.menu.UploadSpeed.230400=230400
lopy4.menu.UploadSpeed.230400.upload.speed=230400
lopy4.menu.UploadSpeed.460800.linux=460800
lopy4.menu.UploadSpeed.460800.macosx=460800
lopy4.menu.UploadSpeed.460800.upload.speed=460800
lopy4.menu.UploadSpeed.512000.windows=512000
lopy4.menu.UploadSpeed.512000.upload.speed=512000
lopy4.menu.DebugLevel.none=None
lopy4.menu.DebugLevel.none.build.code_debug=0
lopy4.menu.DebugLevel.error=Error
lopy4.menu.DebugLevel.error.build.code_debug=1
lopy4.menu.DebugLevel.warn=Warn
lopy4.menu.DebugLevel.warn.build.code_debug=2
lopy4.menu.DebugLevel.info=Info
lopy4.menu.DebugLevel.info.build.code_debug=3
lopy4.menu.DebugLevel.debug=Debug
lopy4.menu.DebugLevel.debug.build.code_debug=4
lopy4.menu.DebugLevel.verbose=Verbose
lopy4.menu.DebugLevel.verbose.build.code_debug=5
Add OROCA EduBot Board (#2264)
2019-01-06 20:47:55 +01:00
##############################################################
oroca_edubot.name=OROCA EduBot
oroca_edubot.upload.tool=esptool_py
Added partition menu for OROCA EduBot board. (#2429)
2019-02-14 13:08:28 +01:00
oroca_edubot.upload.maximum_size=3145728
Add OROCA EduBot Board (#2264)
2019-01-06 20:47:55 +01:00
oroca_edubot.upload.maximum_data_size=327680
oroca_edubot.upload.wait_for_upload_port=true
oroca_edubot.serial.disableDTR=true
oroca_edubot.serial.disableRTS=true
oroca_edubot.build.mcu=esp32
oroca_edubot.build.core=esp32
oroca_edubot.build.variant=oroca_edubot
oroca_edubot.build.board=OROCA_EDUBOT
oroca_edubot.build.f_cpu=240000000L
oroca_edubot.build.flash_mode=dio
oroca_edubot.build.flash_size=4MB
oroca_edubot.build.boot=dio
Added partition menu for OROCA EduBot board. (#2429)
2019-02-14 13:08:28 +01:00
oroca_edubot.build.partitions=huge_app
Add OROCA EduBot Board (#2264)
2019-01-06 20:47:55 +01:00
oroca_edubot.build.defines=
Added partition menu for OROCA EduBot board. (#2429)
2019-02-14 13:08:28 +01:00
oroca_edubot.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
oroca_edubot.menu.PartitionScheme.huge_app.build.partitions=huge_app
oroca_edubot.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
oroca_edubot.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
oroca_edubot.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
oroca_edubot.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
Add OROCA EduBot Board (#2264)
2019-01-06 20:47:55 +01:00
oroca_edubot.menu.FlashFreq.80=80MHz
oroca_edubot.menu.FlashFreq.80.build.flash_freq=80m
oroca_edubot.menu.FlashFreq.40=40MHz
oroca_edubot.menu.FlashFreq.40.build.flash_freq=40m
oroca_edubot.menu.UploadSpeed.921600=921600
oroca_edubot.menu.UploadSpeed.921600.upload.speed=921600
oroca_edubot.menu.UploadSpeed.115200=115200
oroca_edubot.menu.UploadSpeed.115200.upload.speed=115200
oroca_edubot.menu.UploadSpeed.256000.windows=256000
oroca_edubot.menu.UploadSpeed.256000.upload.speed=256000
oroca_edubot.menu.UploadSpeed.230400.windows.upload.speed=256000
oroca_edubot.menu.UploadSpeed.230400=230400
oroca_edubot.menu.UploadSpeed.230400.upload.speed=230400
oroca_edubot.menu.UploadSpeed.460800.linux=460800
oroca_edubot.menu.UploadSpeed.460800.macosx=460800
oroca_edubot.menu.UploadSpeed.460800.upload.speed=460800
oroca_edubot.menu.UploadSpeed.512000.windows=512000
oroca_edubot.menu.UploadSpeed.512000.upload.speed=512000
oroca_edubot.menu.DebugLevel.none=None
oroca_edubot.menu.DebugLevel.none.build.code_debug=0
oroca_edubot.menu.DebugLevel.error=Error
oroca_edubot.menu.DebugLevel.error.build.code_debug=1
oroca_edubot.menu.DebugLevel.warn=Warn
oroca_edubot.menu.DebugLevel.warn.build.code_debug=2
oroca_edubot.menu.DebugLevel.info=Info
oroca_edubot.menu.DebugLevel.info.build.code_debug=3
oroca_edubot.menu.DebugLevel.debug=Debug
oroca_edubot.menu.DebugLevel.debug.build.code_debug=4
oroca_edubot.menu.DebugLevel.verbose=Verbose
oroca_edubot.menu.DebugLevel.verbose.build.code_debug=5
Added ESP32 FM DevKit - Fixed unused pins definitions. (#2288) * Added ESP32 FM DevKit * Added ESP32 FM DevKit variant Fixed pin definitions for unused pins.
2019-01-09 16:50:41 +01:00
##############################################################
fm-devkit.name=ESP32 FM DevKit
fm-devkit.upload.tool=esptool
fm-devkit.upload.maximum_size=1310720
fm-devkit.upload.maximum_data_size=327680
fm-devkit.upload.wait_for_upload_port=true
fm-devkit.serial.disableDTR=true
fm-devkit.serial.disableRTS=true
fm-devkit.build.mcu=esp32
fm-devkit.build.core=esp32
fm-devkit.build.variant=fm-devkit
fm-devkit.build.board=fm-devkit
fm-devkit.build.f_cpu=240000000L
fm-devkit.build.flash_size=4MB
fm-devkit.build.flash_freq=80m
fm-devkit.build.flash_mode=dio
fm-devkit.build.boot=dio
fm-devkit.build.partitions=default
fm-devkit.build.defines=
fm-devkit.menu.UploadSpeed.921600=921600
fm-devkit.menu.UploadSpeed.921600.upload.speed=921600
fm-devkit.menu.UploadSpeed.115200=115200
fm-devkit.menu.UploadSpeed.115200.upload.speed=115200
fm-devkit.menu.UploadSpeed.256000.windows=256000
fm-devkit.menu.UploadSpeed.256000.upload.speed=256000
fm-devkit.menu.UploadSpeed.230400.windows.upload.speed=256000
fm-devkit.menu.UploadSpeed.230400=230400
fm-devkit.menu.UploadSpeed.230400.upload.speed=230400
fm-devkit.menu.UploadSpeed.460800.linux=460800
fm-devkit.menu.UploadSpeed.460800.macosx=460800
fm-devkit.menu.UploadSpeed.460800.upload.speed=460800
fm-devkit.menu.UploadSpeed.512000.windows=512000
fm-devkit.menu.UploadSpeed.512000.upload.speed=512000
fm-devkit.menu.DebugLevel.none=None
fm-devkit.menu.DebugLevel.none.build.code_debug=0
fm-devkit.menu.DebugLevel.error=Error
fm-devkit.menu.DebugLevel.error.build.code_debug=1
fm-devkit.menu.DebugLevel.warn=Warn
fm-devkit.menu.DebugLevel.warn.build.code_debug=2
fm-devkit.menu.DebugLevel.info=Info
fm-devkit.menu.DebugLevel.info.build.code_debug=3
fm-devkit.menu.DebugLevel.debug=Debug
fm-devkit.menu.DebugLevel.debug.build.code_debug=4
fm-devkit.menu.DebugLevel.verbose=Verbose
fm-devkit.menu.DebugLevel.verbose.build.code_debug=5
Frog Board ESP32 definition (#2515) * Added board definition Signed-off-by: Roman Hosek <roman.hosek@iotbakery.com> * fix typo * variant + pin definition
2019-03-03 15:53:49 +01:00
##############################################################
frogboard.name=Frog Board ESP32
frogboard.upload.tool=esptool_py
frogboard.upload.maximum_size=1310720
frogboard.upload.maximum_data_size=327680
frogboard.upload.wait_for_upload_port=true
frogboard.serial.disableDTR=true
frogboard.serial.disableRTS=true
frogboard.build.mcu=esp32
frogboard.build.core=esp32
frogboard.build.variant=frog32
frogboard.build.board=FROG_ESP32
frogboard.build.f_cpu=240000000L
frogboard.build.flash_size=4MB
frogboard.build.flash_freq=40m
frogboard.build.flash_mode=dio
frogboard.build.boot=dio
frogboard.build.partitions=default
frogboard.build.defines=
frogboard.menu.PSRAM.disabled=Disabled
frogboard.menu.PSRAM.disabled.build.defines=
frogboard.menu.PSRAM.enabled=Enabled
frogboard.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
frogboard.menu.PartitionScheme.default=Default
frogboard.menu.PartitionScheme.default.build.partitions=default
frogboard.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
frogboard.menu.PartitionScheme.minimal.build.partitions=minimal
frogboard.menu.PartitionScheme.no_ota=No OTA (Large APP)
frogboard.menu.PartitionScheme.no_ota.build.partitions=no_ota
frogboard.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
frogboard.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
frogboard.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
frogboard.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
frogboard.menu.FlashMode.qio=QIO
frogboard.menu.FlashMode.qio.build.flash_mode=dio
frogboard.menu.FlashMode.qio.build.boot=qio
frogboard.menu.FlashMode.dio=DIO
frogboard.menu.FlashMode.dio.build.flash_mode=dio
frogboard.menu.FlashMode.dio.build.boot=dio
frogboard.menu.FlashMode.qout=QOUT
frogboard.menu.FlashMode.qout.build.flash_mode=dout
frogboard.menu.FlashMode.qout.build.boot=qout
frogboard.menu.FlashMode.dout=DOUT
frogboard.menu.FlashMode.dout.build.flash_mode=dout
frogboard.menu.FlashMode.dout.build.boot=dout
frogboard.menu.FlashFreq.80=80MHz
frogboard.menu.FlashFreq.80.build.flash_freq=80m
frogboard.menu.FlashFreq.40=40MHz
frogboard.menu.FlashFreq.40.build.flash_freq=40m
frogboard.menu.FlashSize.4M=4MB (32Mb)
frogboard.menu.FlashSize.4M.build.flash_size=4MB
frogboard.menu.FlashSize.2M=2MB (16Mb)
frogboard.menu.FlashSize.2M.build.flash_size=2MB
frogboard.menu.FlashSize.2M.build.partitions=minimal
frogboard.menu.UploadSpeed.921600=921600
frogboard.menu.UploadSpeed.921600.upload.speed=921600
frogboard.menu.UploadSpeed.115200=115200
frogboard.menu.UploadSpeed.115200.upload.speed=115200
frogboard.menu.UploadSpeed.256000.windows=256000
frogboard.menu.UploadSpeed.256000.upload.speed=256000
frogboard.menu.UploadSpeed.230400.windows.upload.speed=256000
frogboard.menu.UploadSpeed.230400=230400
frogboard.menu.UploadSpeed.230400.upload.speed=230400
frogboard.menu.UploadSpeed.460800.linux=460800
frogboard.menu.UploadSpeed.460800.macosx=460800
frogboard.menu.UploadSpeed.460800.upload.speed=460800
frogboard.menu.UploadSpeed.512000.windows=512000
frogboard.menu.UploadSpeed.512000.upload.speed=512000
frogboard.menu.DebugLevel.none=None
frogboard.menu.DebugLevel.none.build.code_debug=0
frogboard.menu.DebugLevel.error=Error
frogboard.menu.DebugLevel.error.build.code_debug=1
frogboard.menu.DebugLevel.warn=Warn
frogboard.menu.DebugLevel.warn.build.code_debug=2
frogboard.menu.DebugLevel.info=Info
frogboard.menu.DebugLevel.info.build.code_debug=3
frogboard.menu.DebugLevel.debug=Debug
frogboard.menu.DebugLevel.debug.build.code_debug=4
frogboard.menu.DebugLevel.verbose=Verbose
frogboard.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Set ESP-IDF to 3.2 (#2662) * Set IDF to v3.2 * Remove BLE submodule * Add BLE lib source * Update Camera example to support OV3660
2019-04-12 15:43:53 +02:00
esp32cam.name=AI Thinker ESP32-CAM
esp32cam.upload.tool=esptool_py
esp32cam.upload.maximum_size=3145728
esp32cam.upload.maximum_data_size=327680
esp32cam.upload.wait_for_upload_port=true
esp32cam.upload.speed=460800
esp32cam.serial.disableDTR=true
esp32cam.serial.disableRTS=true
esp32cam.build.mcu=esp32
esp32cam.build.core=esp32
esp32cam.build.variant=esp32
esp32cam.build.board=ESP32_DEV
esp32cam.build.f_cpu=240000000L
esp32cam.build.flash_size=4MB
esp32cam.build.flash_freq=80m
esp32cam.build.flash_mode=dio
esp32cam.build.boot=qio
esp32cam.build.partitions=huge_app
esp32cam.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
esp32cam.build.code_debug=0
##############################################################
Add board "SparkFun LoRa Gateway 1-Channel". (#2664) * Add board "SparkFun LoRa Gateway 1-Channel". * Extend boards.txt. Source: https://learn.sparkfun.com/tutorials/sparkfun-lora-gateway-1-channel-hookup-guide/all
2019-04-13 12:26:35 +02:00
sparkfun_lora_gateway_1-channel.name=SparkFun LoRa Gateway 1-Channel
sparkfun_lora_gateway_1-channel.upload.tool=esptool_py
sparkfun_lora_gateway_1-channel.upload.maximum_size=1310720
sparkfun_lora_gateway_1-channel.upload.maximum_data_size=294912
sparkfun_lora_gateway_1-channel.upload.wait_for_upload_port=true
sparkfun_lora_gateway_1-channel.serial.disableDTR=true
sparkfun_lora_gateway_1-channel.serial.disableRTS=true
sparkfun_lora_gateway_1-channel.build.mcu=esp32
sparkfun_lora_gateway_1-channel.build.core=esp32
sparkfun_lora_gateway_1-channel.build.variant=sparkfun_lora_gateway_1-channel
sparkfun_lora_gateway_1-channel.build.board=ESP32_DEV
sparkfun_lora_gateway_1-channel.build.f_cpu=240000000L
sparkfun_lora_gateway_1-channel.build.flash_size=4MB
sparkfun_lora_gateway_1-channel.build.flash_freq=40m
sparkfun_lora_gateway_1-channel.build.flash_mode=dio
sparkfun_lora_gateway_1-channel.build.boot=dio
sparkfun_lora_gateway_1-channel.build.partitions=default
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.default=Default
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.default.build.partitions=default
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.minimal.build.partitions=minimal
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.no_ota=No OTA (Large APP)
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.no_ota.build.partitions=no_ota
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
sparkfun_lora_gateway_1-channel.menu.FlashMode.qio=QIO
sparkfun_lora_gateway_1-channel.menu.FlashMode.qio.build.flash_mode=dio
sparkfun_lora_gateway_1-channel.menu.FlashMode.qio.build.boot=qio
sparkfun_lora_gateway_1-channel.menu.FlashMode.dio=DIO
sparkfun_lora_gateway_1-channel.menu.FlashMode.dio.build.flash_mode=dio
sparkfun_lora_gateway_1-channel.menu.FlashMode.dio.build.boot=dio
sparkfun_lora_gateway_1-channel.menu.FlashMode.qout=QOUT
sparkfun_lora_gateway_1-channel.menu.FlashMode.qout.build.flash_mode=dout
sparkfun_lora_gateway_1-channel.menu.FlashMode.qout.build.boot=qout
sparkfun_lora_gateway_1-channel.menu.FlashMode.dout=DOUT
sparkfun_lora_gateway_1-channel.menu.FlashMode.dout.build.flash_mode=dout
sparkfun_lora_gateway_1-channel.menu.FlashMode.dout.build.boot=dout
sparkfun_lora_gateway_1-channel.menu.FlashFreq.80=80MHz
sparkfun_lora_gateway_1-channel.menu.FlashFreq.80.build.flash_freq=80m
sparkfun_lora_gateway_1-channel.menu.FlashFreq.40=40MHz
sparkfun_lora_gateway_1-channel.menu.FlashFreq.40.build.flash_freq=40m
sparkfun_lora_gateway_1-channel.menu.FlashSize.4M=4MB (32Mb)
sparkfun_lora_gateway_1-channel.menu.FlashSize.4M.build.flash_size=4MB
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.921600=921600
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.921600.upload.speed=921600
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.115200=115200
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.115200.upload.speed=115200
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.256000.windows=256000
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.256000.upload.speed=256000
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.230400.windows.upload.speed=256000
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.230400=230400
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.230400.upload.speed=230400
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.460800.linux=460800
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.460800.macosx=460800
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.460800.upload.speed=460800
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.512000.windows=512000
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Update T_Watch board properties and add revision selection (#4025) Co-authored-by: lewis he <lewisxhe@outlook.com>
2020-09-30 14:18:17 +02:00
twatch.name=TTGO T-Watch
twatch.upload.tool=esptool_py
twatch.upload.maximum_size=6553600
twatch.upload.maximum_data_size=4521984
twatch.upload.wait_for_upload_port=true
twatch.serial.disableDTR=true
twatch.serial.disableRTS=true
twatch.build.mcu=esp32
twatch.build.core=esp32
twatch.build.variant=twatch
twatch.menu.Revision.TWATCH_BASE=T-Watch Base
twatch.menu.Revision.TWATCH_BASE.build.board=TWATCH_BASE
twatch.menu.Revision.TWATCH_2020_V1=T-Watch-2020-V1
twatch.menu.Revision.TWATCH_2020_V1.build.board=TWATCH_2020_V1
twatch.menu.Revision.TWATCH_2020_V2=T-Watch-2020-V2
twatch.menu.Revision.TWATCH_2020_V2.build.board=TWATCH_2020_V2
twatch.build.f_cpu=240000000L
twatch.build.flash_size=16MB
twatch.build.flash_freq=80m
twatch.build.flash_mode=dio
twatch.build.boot=dio
twatch.build.partitions=default_16MB
twatch.build.defines=
twatch.menu.PSRAM.enabled=Enabled
twatch.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
twatch.menu.PSRAM.disabled=Disabled
twatch.menu.PSRAM.disabled.build.defines=
twatch.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
twatch.menu.PartitionScheme.default.build.partitions=default_16MB
twatch.menu.PartitionScheme.default.upload.maximum_size=6553600
twatch.menu.PartitionScheme.large_spiffs=Large SPIFFS (7 MB)
twatch.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
twatch.menu.PartitionScheme.large_spiffs.upload.maximum_size=4685824
twatch.menu.UploadSpeed.2000000=2000000
twatch.menu.UploadSpeed.2000000.upload.speed=2000000
twatch.menu.UploadSpeed.1152000=1152000
twatch.menu.UploadSpeed.1152000.upload.speed=1152000
twatch.menu.UploadSpeed.921600=921600
twatch.menu.UploadSpeed.921600.upload.speed=921600
twatch.menu.UploadSpeed.115200=115200
twatch.menu.UploadSpeed.115200.upload.speed=115200
twatch.menu.UploadSpeed.256000.windows=256000
twatch.menu.UploadSpeed.256000.upload.speed=256000
twatch.menu.UploadSpeed.230400.windows.upload.speed=256000
twatch.menu.UploadSpeed.230400=230400
twatch.menu.UploadSpeed.230400.upload.speed=230400
twatch.menu.UploadSpeed.460800.linux=460800
twatch.menu.UploadSpeed.460800.macosx=460800
twatch.menu.UploadSpeed.460800.upload.speed=460800
twatch.menu.UploadSpeed.512000.windows=512000
twatch.menu.UploadSpeed.512000.upload.speed=512000
twatch.menu.DebugLevel.none=None
twatch.menu.DebugLevel.none.build.code_debug=0
twatch.menu.DebugLevel.error=Error
twatch.menu.DebugLevel.error.build.code_debug=1
twatch.menu.DebugLevel.warn=Warn
twatch.menu.DebugLevel.warn.build.code_debug=2
twatch.menu.DebugLevel.info=Info
twatch.menu.DebugLevel.info.build.code_debug=3
twatch.menu.DebugLevel.debug=Debug
twatch.menu.DebugLevel.debug.build.code_debug=4
twatch.menu.DebugLevel.verbose=Verbose
twatch.menu.DebugLevel.verbose.build.code_debug=5
Add TTGO T-Watch board definition (#2681)
2019-04-25 11:16:26 +02:00
##############################################################
Add board "WEMOS D1 MINI ESP32". (#2710)
2019-04-27 13:10:21 +02:00
d1_mini32.name=WEMOS D1 MINI ESP32
d1_mini32.upload.tool=esptool_py
d1_mini32.upload.maximum_size=1310720
d1_mini32.upload.maximum_data_size=327680
d1_mini32.upload.wait_for_upload_port=true
d1_mini32.serial.disableDTR=true
d1_mini32.serial.disableRTS=true
d1_mini32.build.mcu=esp32
d1_mini32.build.core=esp32
d1_mini32.build.variant=d1_mini32
d1_mini32.build.board=D1_MINI32
d1_mini32.build.f_cpu=240000000L
d1_mini32.build.flash_mode=dio
d1_mini32.build.flash_size=4MB
d1_mini32.build.boot=dio
d1_mini32.build.partitions=default
d1_mini32.build.defines=
d1_mini32.menu.FlashFreq.80=80MHz
d1_mini32.menu.FlashFreq.80.build.flash_freq=80m
d1_mini32.menu.FlashFreq.40=40MHz
d1_mini32.menu.FlashFreq.40.build.flash_freq=40m
d1_mini32.menu.PartitionScheme.default=Default
d1_mini32.menu.PartitionScheme.default.build.partitions=default
d1_mini32.menu.PartitionScheme.no_ota=No OTA (Large APP)
d1_mini32.menu.PartitionScheme.no_ota.build.partitions=no_ota
d1_mini32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
d1_mini32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
d1_mini32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
d1_mini32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
d1_mini32.menu.CPUFreq.240=240MHz (WiFi/BT)
d1_mini32.menu.CPUFreq.240.build.f_cpu=240000000L
d1_mini32.menu.CPUFreq.160=160MHz (WiFi/BT)
d1_mini32.menu.CPUFreq.160.build.f_cpu=160000000L
d1_mini32.menu.CPUFreq.80=80MHz (WiFi/BT)
d1_mini32.menu.CPUFreq.80.build.f_cpu=80000000L
d1_mini32.menu.CPUFreq.40=40MHz (40MHz XTAL)
d1_mini32.menu.CPUFreq.40.build.f_cpu=40000000L
d1_mini32.menu.CPUFreq.26=26MHz (26MHz XTAL)
d1_mini32.menu.CPUFreq.26.build.f_cpu=26000000L
d1_mini32.menu.CPUFreq.20=20MHz (40MHz XTAL)
d1_mini32.menu.CPUFreq.20.build.f_cpu=20000000L
d1_mini32.menu.CPUFreq.13=13MHz (26MHz XTAL)
d1_mini32.menu.CPUFreq.13.build.f_cpu=13000000L
d1_mini32.menu.CPUFreq.10=10MHz (40MHz XTAL)
d1_mini32.menu.CPUFreq.10.build.f_cpu=10000000L
d1_mini32.menu.UploadSpeed.921600=921600
d1_mini32.menu.UploadSpeed.921600.upload.speed=921600
d1_mini32.menu.UploadSpeed.115200=115200
d1_mini32.menu.UploadSpeed.115200.upload.speed=115200
d1_mini32.menu.UploadSpeed.256000.windows=256000
d1_mini32.menu.UploadSpeed.256000.upload.speed=256000
d1_mini32.menu.UploadSpeed.230400.windows.upload.speed=256000
d1_mini32.menu.UploadSpeed.230400=230400
d1_mini32.menu.UploadSpeed.230400.upload.speed=230400
d1_mini32.menu.UploadSpeed.460800.linux=460800
d1_mini32.menu.UploadSpeed.460800.macosx=460800
d1_mini32.menu.UploadSpeed.460800.upload.speed=460800
d1_mini32.menu.UploadSpeed.512000.windows=512000
d1_mini32.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Frog Board ESP32 definition (#2515) * Added board definition Signed-off-by: Roman Hosek <roman.hosek@iotbakery.com> * fix typo * variant + pin definition
2019-03-03 15:53:49 +01:00
Add Pycom GPy board (#2754)
2019-05-11 10:24:11 +02:00
gpy.name=Pycom GPy
gpy.upload.tool=esptool_py
gpy.upload.maximum_size=1310720
gpy.upload.maximum_data_size=327680
gpy.upload.wait_for_upload_port=true
gpy.serial.disableDTR=true
gpy.serial.disableRTS=true
gpy.build.mcu=esp32
gpy.build.core=esp32
gpy.build.variant=gpy
gpy.build.board=PYCOM_GPY
gpy.build.f_cpu=240000000L
gpy.build.flash_mode=dio
gpy.build.flash_size=8MB
gpy.build.boot=dio
gpy.build.partitions=default
gpy.menu.FlashFreq.80=80MHz
gpy.menu.FlashFreq.80.build.flash_freq=80m
gpy.menu.FlashFreq.40=40MHz
gpy.menu.FlashFreq.40.build.flash_freq=40m
gpy.menu.UploadSpeed.921600=921600
gpy.menu.UploadSpeed.921600.upload.speed=921600
gpy.menu.UploadSpeed.115200=115200
gpy.menu.UploadSpeed.115200.upload.speed=115200
gpy.menu.UploadSpeed.256000.windows=256000
gpy.menu.UploadSpeed.256000.upload.speed=256000
gpy.menu.UploadSpeed.230400.windows.upload.speed=256000
gpy.menu.UploadSpeed.230400=230400
gpy.menu.UploadSpeed.230400.upload.speed=230400
gpy.menu.UploadSpeed.460800.linux=460800
gpy.menu.UploadSpeed.460800.macosx=460800
gpy.menu.UploadSpeed.460800.upload.speed=460800
gpy.menu.UploadSpeed.512000.windows=512000
gpy.menu.UploadSpeed.512000.upload.speed=512000
gpy.menu.DebugLevel.none=None
gpy.menu.DebugLevel.none.build.code_debug=0
gpy.menu.DebugLevel.error=Error
gpy.menu.DebugLevel.error.build.code_debug=1
gpy.menu.DebugLevel.warn=Warn
gpy.menu.DebugLevel.warn.build.code_debug=2
gpy.menu.DebugLevel.info=Info
gpy.menu.DebugLevel.info.build.code_debug=3
gpy.menu.DebugLevel.debug=Debug
gpy.menu.DebugLevel.debug.build.code_debug=4
gpy.menu.DebugLevel.verbose=Verbose
gpy.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Added board defintion for VintLabs boards (#3252)
2019-09-24 11:26:15 +02:00
vintlabs-devkit-v1.name=VintLabs ESP32 Devkit
vintlabs-devkit-v1.upload.tool=esptool_py
vintlabs-devkit-v1.upload.maximum_size=1310720
vintlabs-devkit-v1.upload.maximum_data_size=327680
vintlabs-devkit-v1.upload.wait_for_upload_port=true
vintlabs-devkit-v1.serial.disableDTR=true
vintlabs-devkit-v1.serial.disableRTS=true
vintlabs-devkit-v1.build.mcu=esp32
vintlabs-devkit-v1.build.core=esp32
vintlabs-devkit-v1.build.variant=vintlabsdevkitv1
vintlabs-devkit-v1.build.board=ESP32_DEV
vintlabs-devkit-v1.build.f_cpu=240000000L
vintlabs-devkit-v1.build.flash_mode=dio
vintlabs-devkit-v1.build.flash_size=4MB
vintlabs-devkit-v1.build.boot=dio
vintlabs-devkit-v1.build.partitions=default
vintlabs-devkit-v1.build.defines=
vintlabs-devkit-v1.menu.FlashFreq.80=80MHz
vintlabs-devkit-v1.menu.FlashFreq.80.build.flash_freq=80m
vintlabs-devkit-v1.menu.FlashFreq.40=40MHz
vintlabs-devkit-v1.menu.FlashFreq.40.build.flash_freq=40m
vintlabs-devkit-v1.menu.UploadSpeed.2000000=2000000
vintlabs-devkit-v1.menu.UploadSpeed.2000000.upload.speed=2000000
vintlabs-devkit-v1.menu.UploadSpeed.921600=921600
vintlabs-devkit-v1.menu.UploadSpeed.921600.upload.speed=921600
vintlabs-devkit-v1.menu.UploadSpeed.115200=115200
vintlabs-devkit-v1.menu.UploadSpeed.115200.upload.speed=115200
vintlabs-devkit-v1.menu.UploadSpeed.256000.windows=256000
vintlabs-devkit-v1.menu.UploadSpeed.256000.upload.speed=256000
vintlabs-devkit-v1.menu.UploadSpeed.230400.windows.upload.speed=256000
vintlabs-devkit-v1.menu.UploadSpeed.230400=230400
vintlabs-devkit-v1.menu.UploadSpeed.230400.upload.speed=230400
vintlabs-devkit-v1.menu.UploadSpeed.460800.linux=460800
vintlabs-devkit-v1.menu.UploadSpeed.460800.macosx=460800
vintlabs-devkit-v1.menu.UploadSpeed.460800.upload.speed=460800
vintlabs-devkit-v1.menu.UploadSpeed.512000.windows=512000
vintlabs-devkit-v1.menu.UploadSpeed.512000.upload.speed=512000
Added partition and flash size menus for VintLabs boards (#3602) add the partition and flash size menus for the VintLabs board definitions.
2020-01-20 15:07:53 +01:00
vintlabs-devkit-v1.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
vintlabs-devkit-v1.menu.PartitionScheme.default.build.partitions=default
vintlabs-devkit-v1.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
vintlabs-devkit-v1.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
vintlabs-devkit-v1.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
vintlabs-devkit-v1.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
vintlabs-devkit-v1.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
vintlabs-devkit-v1.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
vintlabs-devkit-v1.menu.PartitionScheme.minimal.build.partitions=minimal
vintlabs-devkit-v1.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
vintlabs-devkit-v1.menu.PartitionScheme.no_ota.build.partitions=no_ota
vintlabs-devkit-v1.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
vintlabs-devkit-v1.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
vintlabs-devkit-v1.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
vintlabs-devkit-v1.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
vintlabs-devkit-v1.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
vintlabs-devkit-v1.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
vintlabs-devkit-v1.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
vintlabs-devkit-v1.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
vintlabs-devkit-v1.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
vintlabs-devkit-v1.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
vintlabs-devkit-v1.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
vintlabs-devkit-v1.menu.PartitionScheme.huge_app.build.partitions=huge_app
vintlabs-devkit-v1.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
vintlabs-devkit-v1.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
vintlabs-devkit-v1.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
vintlabs-devkit-v1.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
vintlabs-devkit-v1.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
vintlabs-devkit-v1.menu.PartitionScheme.fatflash.build.partitions=ffat
vintlabs-devkit-v1.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
vintlabs-devkit-v1.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
vintlabs-devkit-v1.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
vintlabs-devkit-v1.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
vintlabs-devkit-v1.menu.FlashSize.4M=4MB (32Mb)
vintlabs-devkit-v1.menu.FlashSize.4M.build.flash_size=4MB
vintlabs-devkit-v1.menu.FlashSize.8M=8MB (64Mb)
vintlabs-devkit-v1.menu.FlashSize.8M.build.flash_size=8MB
vintlabs-devkit-v1.menu.FlashSize.8M.build.partitions=default_8MB
vintlabs-devkit-v1.menu.FlashSize.2M=2MB (16Mb)
vintlabs-devkit-v1.menu.FlashSize.2M.build.flash_size=2MB
vintlabs-devkit-v1.menu.FlashSize.2M.build.partitions=minimal
vintlabs-devkit-v1.menu.FlashSize.16M=16MB (128Mb)
vintlabs-devkit-v1.menu.FlashSize.16M.build.flash_size=16MB
Added board defintion for VintLabs boards (#3252)
2019-09-24 11:26:15 +02:00
vintlabs-devkit-v1.menu.DebugLevel.none=None
vintlabs-devkit-v1.menu.DebugLevel.none.build.code_debug=0
vintlabs-devkit-v1.menu.DebugLevel.error=Error
vintlabs-devkit-v1.menu.DebugLevel.error.build.code_debug=1
vintlabs-devkit-v1.menu.DebugLevel.warn=Warn
vintlabs-devkit-v1.menu.DebugLevel.warn.build.code_debug=2
vintlabs-devkit-v1.menu.DebugLevel.info=Info
vintlabs-devkit-v1.menu.DebugLevel.info.build.code_debug=3
vintlabs-devkit-v1.menu.DebugLevel.debug=Debug
vintlabs-devkit-v1.menu.DebugLevel.debug.build.code_debug=4
##############################################################
Add HONEYLemon board (#3640) * add board HONEYLemon
2020-01-20 15:12:02 +01:00
honeylemon.name=HONEYLemon
honeylemon.upload.tool=esptool_py
honeylemon.upload.maximum_size=1310720
honeylemon.upload.maximum_data_size=327680
honeylemon.upload.wait_for_upload_port=true
honeylemon.serial.disableDTR=true
honeylemon.serial.disableRTS=true
honeylemon.build.mcu=esp32
honeylemon.build.core=esp32
honeylemon.build.variant=honeylemon
honeylemon.build.board=HONEYLEMON
honeylemon.build.f_cpu=240000000L
honeylemon.build.flash_mode=dio
honeylemon.build.flash_size=4MB
honeylemon.build.boot=dio
honeylemon.build.partitions=default
honeylemon.build.defines=
honeylemon.menu.FlashFreq.80=80MHz
honeylemon.menu.FlashFreq.80.build.flash_freq=80m
honeylemon.menu.FlashFreq.40=40MHz
honeylemon.menu.FlashFreq.40.build.flash_freq=40m
honeylemon.menu.UploadSpeed.921600=921600
honeylemon.menu.UploadSpeed.921600.upload.speed=921600
honeylemon.menu.UploadSpeed.115200=115200
honeylemon.menu.UploadSpeed.115200.upload.speed=115200
honeylemon.menu.UploadSpeed.256000.windows=256000
honeylemon.menu.UploadSpeed.256000.upload.speed=256000
honeylemon.menu.UploadSpeed.230400.windows.upload.speed=256000
honeylemon.menu.UploadSpeed.230400=230400
honeylemon.menu.UploadSpeed.230400.upload.speed=230400
honeylemon.menu.UploadSpeed.460800.linux=460800
honeylemon.menu.UploadSpeed.460800.macosx=460800
honeylemon.menu.UploadSpeed.460800.upload.speed=460800
honeylemon.menu.UploadSpeed.512000.windows=512000
honeylemon.menu.UploadSpeed.512000.upload.speed=512000
##############################################################
Added MGBOT IOTIK 32A and IOTIK 32B boards (#3427)
2020-01-20 14:19:35 +01:00
mgbot-iotik32a.name=MGBOT IOTIK 32A
mgbot-iotik32a.upload.tool=esptool_py
mgbot-iotik32a.upload.maximum_size=1310720
mgbot-iotik32a.upload.maximum_data_size=327680
mgbot-iotik32a.upload.wait_for_upload_port=true
mgbot-iotik32a.serial.disableDTR=true
mgbot-iotik32a.serial.disableRTS=true
mgbot-iotik32a.build.mcu=esp32
mgbot-iotik32a.build.core=esp32
mgbot-iotik32a.build.variant=mgbot-iotik32a
mgbot-iotik32a.build.board=MGBOT_IOTIK32A
mgbot-iotik32a.build.f_cpu=240000000L
mgbot-iotik32a.build.flash_size=4MB
mgbot-iotik32a.build.flash_freq=40m
mgbot-iotik32a.build.flash_mode=dio
mgbot-iotik32a.build.boot=dio
mgbot-iotik32a.build.partitions=default
mgbot-iotik32a.build.defines=
mgbot-iotik32a.menu.PSRAM.disabled=Disabled
mgbot-iotik32a.menu.PSRAM.disabled.build.defines=
mgbot-iotik32a.menu.PSRAM.enabled=Enabled
mgbot-iotik32a.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
mgbot-iotik32a.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
mgbot-iotik32a.menu.PartitionScheme.default.build.partitions=default
mgbot-iotik32a.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
mgbot-iotik32a.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
mgbot-iotik32a.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
mgbot-iotik32a.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
mgbot-iotik32a.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
mgbot-iotik32a.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
mgbot-iotik32a.menu.PartitionScheme.minimal.build.partitions=minimal
mgbot-iotik32a.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
mgbot-iotik32a.menu.PartitionScheme.no_ota.build.partitions=no_ota
mgbot-iotik32a.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
mgbot-iotik32a.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
mgbot-iotik32a.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
mgbot-iotik32a.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
mgbot-iotik32a.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
mgbot-iotik32a.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
mgbot-iotik32a.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
mgbot-iotik32a.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
mgbot-iotik32a.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
mgbot-iotik32a.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
mgbot-iotik32a.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
mgbot-iotik32a.menu.PartitionScheme.huge_app.build.partitions=huge_app
mgbot-iotik32a.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
mgbot-iotik32a.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
mgbot-iotik32a.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
mgbot-iotik32a.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
mgbot-iotik32a.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
mgbot-iotik32a.menu.PartitionScheme.fatflash.build.partitions=ffat
mgbot-iotik32a.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
mgbot-iotik32a.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
mgbot-iotik32a.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
mgbot-iotik32a.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
mgbot-iotik32a.menu.CPUFreq.240=240MHz (WiFi/BT)
mgbot-iotik32a.menu.CPUFreq.240.build.f_cpu=240000000L
mgbot-iotik32a.menu.CPUFreq.160=160MHz (WiFi/BT)
mgbot-iotik32a.menu.CPUFreq.160.build.f_cpu=160000000L
mgbot-iotik32a.menu.CPUFreq.80=80MHz (WiFi/BT)
mgbot-iotik32a.menu.CPUFreq.80.build.f_cpu=80000000L
mgbot-iotik32a.menu.CPUFreq.40=40MHz (40MHz XTAL)
mgbot-iotik32a.menu.CPUFreq.40.build.f_cpu=40000000L
mgbot-iotik32a.menu.CPUFreq.26=26MHz (26MHz XTAL)
mgbot-iotik32a.menu.CPUFreq.26.build.f_cpu=26000000L
mgbot-iotik32a.menu.CPUFreq.20=20MHz (40MHz XTAL)
mgbot-iotik32a.menu.CPUFreq.20.build.f_cpu=20000000L
mgbot-iotik32a.menu.CPUFreq.13=13MHz (26MHz XTAL)
mgbot-iotik32a.menu.CPUFreq.13.build.f_cpu=13000000L
mgbot-iotik32a.menu.CPUFreq.10=10MHz (40MHz XTAL)
mgbot-iotik32a.menu.CPUFreq.10.build.f_cpu=10000000L
mgbot-iotik32a.menu.FlashMode.qio=QIO
mgbot-iotik32a.menu.FlashMode.qio.build.flash_mode=dio
mgbot-iotik32a.menu.FlashMode.qio.build.boot=qio
mgbot-iotik32a.menu.FlashMode.dio=DIO
mgbot-iotik32a.menu.FlashMode.dio.build.flash_mode=dio
mgbot-iotik32a.menu.FlashMode.dio.build.boot=dio
mgbot-iotik32a.menu.FlashMode.qout=QOUT
mgbot-iotik32a.menu.FlashMode.qout.build.flash_mode=dout
mgbot-iotik32a.menu.FlashMode.qout.build.boot=qout
mgbot-iotik32a.menu.FlashMode.dout=DOUT
mgbot-iotik32a.menu.FlashMode.dout.build.flash_mode=dout
mgbot-iotik32a.menu.FlashMode.dout.build.boot=dout
mgbot-iotik32a.menu.FlashFreq.80=80MHz
mgbot-iotik32a.menu.FlashFreq.80.build.flash_freq=80m
mgbot-iotik32a.menu.FlashFreq.40=40MHz
mgbot-iotik32a.menu.FlashFreq.40.build.flash_freq=40m
mgbot-iotik32a.menu.FlashSize.4M=4MB (32Mb)
mgbot-iotik32a.menu.FlashSize.4M.build.flash_size=4MB
mgbot-iotik32a.menu.FlashSize.8M=8MB (64Mb)
mgbot-iotik32a.menu.FlashSize.8M.build.flash_size=8MB
mgbot-iotik32a.menu.FlashSize.8M.build.partitions=default_8MB
mgbot-iotik32a.menu.FlashSize.2M=2MB (16Mb)
mgbot-iotik32a.menu.FlashSize.2M.build.flash_size=2MB
mgbot-iotik32a.menu.FlashSize.2M.build.partitions=minimal
mgbot-iotik32a.menu.FlashSize.16M=16MB (128Mb)
mgbot-iotik32a.menu.FlashSize.16M.build.flash_size=16MB
mgbot-iotik32a.menu.UploadSpeed.921600=921600
mgbot-iotik32a.menu.UploadSpeed.921600.upload.speed=921600
mgbot-iotik32a.menu.UploadSpeed.115200=115200
mgbot-iotik32a.menu.UploadSpeed.115200.upload.speed=115200
mgbot-iotik32a.menu.UploadSpeed.256000.windows=256000
mgbot-iotik32a.menu.UploadSpeed.256000.upload.speed=256000
mgbot-iotik32a.menu.UploadSpeed.230400.windows.upload.speed=256000
mgbot-iotik32a.menu.UploadSpeed.230400=230400
mgbot-iotik32a.menu.UploadSpeed.230400.upload.speed=230400
mgbot-iotik32a.menu.UploadSpeed.460800.linux=460800
mgbot-iotik32a.menu.UploadSpeed.460800.macosx=460800
mgbot-iotik32a.menu.UploadSpeed.460800.upload.speed=460800
mgbot-iotik32a.menu.UploadSpeed.512000.windows=512000
mgbot-iotik32a.menu.UploadSpeed.512000.upload.speed=512000
mgbot-iotik32a.menu.DebugLevel.none=None
mgbot-iotik32a.menu.DebugLevel.none.build.code_debug=0
mgbot-iotik32a.menu.DebugLevel.error=Error
mgbot-iotik32a.menu.DebugLevel.error.build.code_debug=1
mgbot-iotik32a.menu.DebugLevel.warn=Warn
mgbot-iotik32a.menu.DebugLevel.warn.build.code_debug=2
mgbot-iotik32a.menu.DebugLevel.info=Info
mgbot-iotik32a.menu.DebugLevel.info.build.code_debug=3
mgbot-iotik32a.menu.DebugLevel.debug=Debug
mgbot-iotik32a.menu.DebugLevel.debug.build.code_debug=4
mgbot-iotik32a.menu.DebugLevel.verbose=Verbose
mgbot-iotik32a.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
mgbot-iotik32b.name=MGBOT IOTIK 32B
mgbot-iotik32b.upload.tool=esptool_py
mgbot-iotik32b.upload.maximum_size=1310720
mgbot-iotik32b.upload.maximum_data_size=327680
mgbot-iotik32b.upload.wait_for_upload_port=true
mgbot-iotik32b.serial.disableDTR=true
mgbot-iotik32b.serial.disableRTS=true
mgbot-iotik32b.build.mcu=esp32
mgbot-iotik32b.build.core=esp32
mgbot-iotik32b.build.variant=mgbot-iotik32b
mgbot-iotik32b.build.board=MGBOT_IOTIK32B
mgbot-iotik32b.build.f_cpu=240000000L
mgbot-iotik32b.build.flash_size=4MB
mgbot-iotik32b.build.flash_freq=40m
mgbot-iotik32b.build.flash_mode=dio
mgbot-iotik32b.build.boot=dio
mgbot-iotik32b.build.partitions=default
mgbot-iotik32b.build.defines=
mgbot-iotik32b.menu.PSRAM.disabled=Disabled
mgbot-iotik32b.menu.PSRAM.disabled.build.defines=
mgbot-iotik32b.menu.PSRAM.enabled=Enabled
mgbot-iotik32b.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
mgbot-iotik32b.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
mgbot-iotik32b.menu.PartitionScheme.default.build.partitions=default
mgbot-iotik32b.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
mgbot-iotik32b.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
mgbot-iotik32b.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
mgbot-iotik32b.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
mgbot-iotik32b.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
mgbot-iotik32b.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
mgbot-iotik32b.menu.PartitionScheme.minimal.build.partitions=minimal
mgbot-iotik32b.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
mgbot-iotik32b.menu.PartitionScheme.no_ota.build.partitions=no_ota
mgbot-iotik32b.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
mgbot-iotik32b.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
mgbot-iotik32b.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
mgbot-iotik32b.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
mgbot-iotik32b.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
mgbot-iotik32b.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
mgbot-iotik32b.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
mgbot-iotik32b.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
mgbot-iotik32b.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
mgbot-iotik32b.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
mgbot-iotik32b.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
mgbot-iotik32b.menu.PartitionScheme.huge_app.build.partitions=huge_app
mgbot-iotik32b.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
mgbot-iotik32b.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
mgbot-iotik32b.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
mgbot-iotik32b.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
mgbot-iotik32b.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
mgbot-iotik32b.menu.PartitionScheme.fatflash.build.partitions=ffat
mgbot-iotik32b.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
mgbot-iotik32b.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
mgbot-iotik32b.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
mgbot-iotik32b.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
mgbot-iotik32b.menu.CPUFreq.240=240MHz (WiFi/BT)
mgbot-iotik32b.menu.CPUFreq.240.build.f_cpu=240000000L
mgbot-iotik32b.menu.CPUFreq.160=160MHz (WiFi/BT)
mgbot-iotik32b.menu.CPUFreq.160.build.f_cpu=160000000L
mgbot-iotik32b.menu.CPUFreq.80=80MHz (WiFi/BT)
mgbot-iotik32b.menu.CPUFreq.80.build.f_cpu=80000000L
mgbot-iotik32b.menu.CPUFreq.40=40MHz (40MHz XTAL)
mgbot-iotik32b.menu.CPUFreq.40.build.f_cpu=40000000L
mgbot-iotik32b.menu.CPUFreq.26=26MHz (26MHz XTAL)
mgbot-iotik32b.menu.CPUFreq.26.build.f_cpu=26000000L
mgbot-iotik32b.menu.CPUFreq.20=20MHz (40MHz XTAL)
mgbot-iotik32b.menu.CPUFreq.20.build.f_cpu=20000000L
mgbot-iotik32b.menu.CPUFreq.13=13MHz (26MHz XTAL)
mgbot-iotik32b.menu.CPUFreq.13.build.f_cpu=13000000L
mgbot-iotik32b.menu.CPUFreq.10=10MHz (40MHz XTAL)
mgbot-iotik32b.menu.CPUFreq.10.build.f_cpu=10000000L
mgbot-iotik32b.menu.FlashMode.qio=QIO
mgbot-iotik32b.menu.FlashMode.qio.build.flash_mode=dio
mgbot-iotik32b.menu.FlashMode.qio.build.boot=qio
mgbot-iotik32b.menu.FlashMode.dio=DIO
mgbot-iotik32b.menu.FlashMode.dio.build.flash_mode=dio
mgbot-iotik32b.menu.FlashMode.dio.build.boot=dio
mgbot-iotik32b.menu.FlashMode.qout=QOUT
mgbot-iotik32b.menu.FlashMode.qout.build.flash_mode=dout
mgbot-iotik32b.menu.FlashMode.qout.build.boot=qout
mgbot-iotik32b.menu.FlashMode.dout=DOUT
mgbot-iotik32b.menu.FlashMode.dout.build.flash_mode=dout
mgbot-iotik32b.menu.FlashMode.dout.build.boot=dout
mgbot-iotik32b.menu.FlashFreq.80=80MHz
mgbot-iotik32b.menu.FlashFreq.80.build.flash_freq=80m
mgbot-iotik32b.menu.FlashFreq.40=40MHz
mgbot-iotik32b.menu.FlashFreq.40.build.flash_freq=40m
mgbot-iotik32b.menu.FlashSize.4M=4MB (32Mb)
mgbot-iotik32b.menu.FlashSize.4M.build.flash_size=4MB
mgbot-iotik32b.menu.FlashSize.8M=8MB (64Mb)
mgbot-iotik32b.menu.FlashSize.8M.build.flash_size=8MB
mgbot-iotik32b.menu.FlashSize.8M.build.partitions=default_8MB
mgbot-iotik32b.menu.FlashSize.2M=2MB (16Mb)
mgbot-iotik32b.menu.FlashSize.2M.build.flash_size=2MB
mgbot-iotik32b.menu.FlashSize.2M.build.partitions=minimal
mgbot-iotik32b.menu.FlashSize.16M=16MB (128Mb)
mgbot-iotik32b.menu.FlashSize.16M.build.flash_size=16MB
mgbot-iotik32b.menu.UploadSpeed.921600=921600
mgbot-iotik32b.menu.UploadSpeed.921600.upload.speed=921600
mgbot-iotik32b.menu.UploadSpeed.115200=115200
mgbot-iotik32b.menu.UploadSpeed.115200.upload.speed=115200
mgbot-iotik32b.menu.UploadSpeed.256000.windows=256000
mgbot-iotik32b.menu.UploadSpeed.256000.upload.speed=256000
mgbot-iotik32b.menu.UploadSpeed.230400.windows.upload.speed=256000
mgbot-iotik32b.menu.UploadSpeed.230400=230400
mgbot-iotik32b.menu.UploadSpeed.230400.upload.speed=230400
mgbot-iotik32b.menu.UploadSpeed.460800.linux=460800
mgbot-iotik32b.menu.UploadSpeed.460800.macosx=460800
mgbot-iotik32b.menu.UploadSpeed.460800.upload.speed=460800
mgbot-iotik32b.menu.UploadSpeed.512000.windows=512000
mgbot-iotik32b.menu.UploadSpeed.512000.upload.speed=512000
mgbot-iotik32b.menu.DebugLevel.none=None
mgbot-iotik32b.menu.DebugLevel.none.build.code_debug=0
mgbot-iotik32b.menu.DebugLevel.error=Error
mgbot-iotik32b.menu.DebugLevel.error.build.code_debug=1
mgbot-iotik32b.menu.DebugLevel.warn=Warn
mgbot-iotik32b.menu.DebugLevel.warn.build.code_debug=2
mgbot-iotik32b.menu.DebugLevel.info=Info
mgbot-iotik32b.menu.DebugLevel.info.build.code_debug=3
mgbot-iotik32b.menu.DebugLevel.debug=Debug
mgbot-iotik32b.menu.DebugLevel.debug.build.code_debug=4
mgbot-iotik32b.menu.DebugLevel.verbose=Verbose
mgbot-iotik32b.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Added Piranha ESP-32 and Metro ESP-32 boards (#3542) Added two boards from iarduino.ru based on ESP-32
2020-01-20 15:06:06 +01:00
piranha_esp-32.name=Piranha ESP-32
piranha_esp-32.upload.tool=esptool_py
piranha_esp-32.upload.maximum_size=1310720
piranha_esp-32.upload.maximum_data_size=327680
piranha_esp-32.upload.wait_for_upload_port=true
piranha_esp-32.serial.disableDTR=true
piranha_esp-32.serial.disableRTS=true
piranha_esp-32.build.mcu=esp32
piranha_esp-32.build.core=esp32
piranha_esp-32.build.variant=piranha_esp-32
piranha_esp-32.build.board=Piranha
piranha_esp-32.build.f_cpu=240000000L
piranha_esp-32.build.flash_mode=dio
piranha_esp-32.build.flash_size=4MB
piranha_esp-32.build.boot=dio
piranha_esp-32.build.partitions=default
piranha_esp-32.build.defines=
piranha_esp-32.menu.PartitionScheme.default=Default
piranha_esp-32.menu.PartitionScheme.default.build.partitions=default
piranha_esp-32.menu.PartitionScheme.no_ota=No OTA (Large APP)
piranha_esp-32.menu.PartitionScheme.no_ota.build.partitions=no_ota
piranha_esp-32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
piranha_esp-32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
piranha_esp-32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
piranha_esp-32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
piranha_esp-32.menu.FlashFreq.80=80MHz
piranha_esp-32.menu.FlashFreq.80.build.flash_freq=80m
piranha_esp-32.menu.FlashFreq.40=40MHz
piranha_esp-32.menu.FlashFreq.40.build.flash_freq=40m
piranha_esp-32.menu.UploadSpeed.921600=921600
piranha_esp-32.menu.UploadSpeed.921600.upload.speed=921600
piranha_esp-32.menu.UploadSpeed.115200=115200
piranha_esp-32.menu.UploadSpeed.115200.upload.speed=115200
piranha_esp-32.menu.UploadSpeed.256000.windows=256000
piranha_esp-32.menu.UploadSpeed.256000.upload.speed=256000
piranha_esp-32.menu.UploadSpeed.230400.windows.upload.speed=256000
piranha_esp-32.menu.UploadSpeed.230400=230400
piranha_esp-32.menu.UploadSpeed.230400.upload.speed=230400
piranha_esp-32.menu.UploadSpeed.460800.linux=460800
piranha_esp-32.menu.UploadSpeed.460800.macosx=460800
piranha_esp-32.menu.UploadSpeed.460800.upload.speed=460800
piranha_esp-32.menu.UploadSpeed.512000.windows=512000
piranha_esp-32.menu.UploadSpeed.512000.upload.speed=512000
piranha_esp-32.menu.DebugLevel.none=None
piranha_esp-32.menu.DebugLevel.none.build.code_debug=0
piranha_esp-32.menu.DebugLevel.error=Error
piranha_esp-32.menu.DebugLevel.error.build.code_debug=1
piranha_esp-32.menu.DebugLevel.warn=Warn
piranha_esp-32.menu.DebugLevel.warn.build.code_debug=2
piranha_esp-32.menu.DebugLevel.info=Info
piranha_esp-32.menu.DebugLevel.info.build.code_debug=3
piranha_esp-32.menu.DebugLevel.debug=Debug
piranha_esp-32.menu.DebugLevel.debug.build.code_debug=4
piranha_esp-32.menu.DebugLevel.verbose=Verbose
piranha_esp-32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
metro_esp-32.name=Metro ESP-32
metro_esp-32.upload.tool=esptool_py
metro_esp-32.upload.maximum_size=1310720
metro_esp-32.upload.maximum_data_size=327680
metro_esp-32.upload.wait_for_upload_port=true
metro_esp-32.serial.disableDTR=true
metro_esp-32.serial.disableRTS=true
metro_esp-32.build.mcu=esp32
metro_esp-32.build.core=esp32
metro_esp-32.build.variant=metro_esp-32
metro_esp-32.build.board=Metro
metro_esp-32.build.f_cpu=240000000L
metro_esp-32.build.flash_mode=dio
metro_esp-32.build.flash_size=4MB
metro_esp-32.build.boot=dio
metro_esp-32.build.partitions=default
metro_esp-32.build.defines=
metro_esp-32.menu.PartitionScheme.default=Default
metro_esp-32.menu.PartitionScheme.default.build.partitions=default
metro_esp-32.menu.PartitionScheme.no_ota=No OTA (Large APP)
metro_esp-32.menu.PartitionScheme.no_ota.build.partitions=no_ota
metro_esp-32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
metro_esp-32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
metro_esp-32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
metro_esp-32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
metro_esp-32.menu.FlashFreq.80=80MHz
metro_esp-32.menu.FlashFreq.80.build.flash_freq=80m
metro_esp-32.menu.FlashFreq.40=40MHz
metro_esp-32.menu.FlashFreq.40.build.flash_freq=40m
metro_esp-32.menu.UploadSpeed.921600=921600
metro_esp-32.menu.UploadSpeed.921600.upload.speed=921600
metro_esp-32.menu.UploadSpeed.115200=115200
metro_esp-32.menu.UploadSpeed.115200.upload.speed=115200
metro_esp-32.menu.UploadSpeed.256000.windows=256000
metro_esp-32.menu.UploadSpeed.256000.upload.speed=256000
metro_esp-32.menu.UploadSpeed.230400.windows.upload.speed=256000
metro_esp-32.menu.UploadSpeed.230400=230400
metro_esp-32.menu.UploadSpeed.230400.upload.speed=230400
metro_esp-32.menu.UploadSpeed.460800.linux=460800
metro_esp-32.menu.UploadSpeed.460800.macosx=460800
metro_esp-32.menu.UploadSpeed.460800.upload.speed=460800
metro_esp-32.menu.UploadSpeed.512000.windows=512000
metro_esp-32.menu.UploadSpeed.512000.upload.speed=512000
metro_esp-32.menu.DebugLevel.none=None
metro_esp-32.menu.DebugLevel.none.build.code_debug=0
metro_esp-32.menu.DebugLevel.error=Error
metro_esp-32.menu.DebugLevel.error.build.code_debug=1
metro_esp-32.menu.DebugLevel.warn=Warn
metro_esp-32.menu.DebugLevel.warn.build.code_debug=2
metro_esp-32.menu.DebugLevel.info=Info
metro_esp-32.menu.DebugLevel.info.build.code_debug=3
metro_esp-32.menu.DebugLevel.debug=Debug
metro_esp-32.menu.DebugLevel.debug.build.code_debug=4
metro_esp-32.menu.DebugLevel.verbose=Verbose
metro_esp-32.menu.DebugLevel.verbose.build.code_debug=5
##############################################################
Add Senses's WEIZEN board from Senses IoT platform (#3687) * Add Senses's WEIZEN board from Senses IoT platform * Add Senses's WEIZEN board (updated variant)
2020-01-29 16:08:14 +01:00
sensesiot_weizen.name=Senses's WEIZEN
sensesiot_weizen.upload.tool=esptool_py
sensesiot_weizen.upload.maximum_size=1310720
sensesiot_weizen.upload.maximum_data_size=327680
sensesiot_weizen.upload.wait_for_upload_port=true
sensesiot_weizen.serial.disableDTR=true
sensesiot_weizen.serial.disableRTS=true
sensesiot_weizen.build.mcu=esp32
sensesiot_weizen.build.core=esp32
sensesiot_weizen.build.variant=esp32
sensesiot_weizen.build.board=sensesiot_weizen
sensesiot_weizen.build.f_cpu=240000000L
sensesiot_weizen.build.flash_mode=dio
sensesiot_weizen.build.flash_size=4MB
sensesiot_weizen.build.boot=dio
sensesiot_weizen.build.partitions=default
sensesiot_weizen.build.defines=
sensesiot_weizen.menu.FlashFreq.80=80MHz
sensesiot_weizen.menu.FlashFreq.80.build.flash_freq=80m
sensesiot_weizen.menu.FlashFreq.40=40MHz
sensesiot_weizen.menu.FlashFreq.40.build.flash_freq=40m
sensesiot_weizen.menu.UploadSpeed.921600=921600
sensesiot_weizen.menu.UploadSpeed.921600.upload.speed=921600
sensesiot_weizen.menu.UploadSpeed.115200=115200
sensesiot_weizen.menu.UploadSpeed.115200.upload.speed=115200
sensesiot_weizen.menu.UploadSpeed.256000.windows=256000
sensesiot_weizen.menu.UploadSpeed.256000.upload.speed=256000
sensesiot_weizen.menu.UploadSpeed.230400.windows.upload.speed=256000
sensesiot_weizen.menu.UploadSpeed.230400=230400
sensesiot_weizen.menu.UploadSpeed.230400.upload.speed=230400
sensesiot_weizen.menu.UploadSpeed.460800.linux=460800
sensesiot_weizen.menu.UploadSpeed.460800.macosx=460800
sensesiot_weizen.menu.UploadSpeed.460800.upload.speed=460800
sensesiot_weizen.menu.UploadSpeed.512000.windows=512000
sensesiot_weizen.menu.UploadSpeed.512000.upload.speed=512000
Add a new board of KITS for IoT education (#3703) * Add 'KITS Edu ESP32' board definition add 'KITS Edu ESP32' board definition * Modify board name the board name was modified. * Change the board name Finally, we decided the board name. - 'KITS ESP32 EDU' Co-authored-by: Hamson Park <hamson.park@koreaits.com> Co-authored-by: Hamson Park <hspark3235@gmail.com>
2020-05-29 10:46:25 +02:00
##############################################################
kits-edu.name=KITS ESP32 EDU
kits-edu.upload.tool=esptool_py
kits-edu.upload.maximum_size=1310720
kits-edu.upload.maximum_data_size=327680
kits-edu.upload.wait_for_upload_port=true
kits-edu.serial.disableDTR=true
kits-edu.serial.disableRTS=true
kits-edu.build.mcu=esp32
kits-edu.build.core=esp32
kits-edu.build.variant=pico32
kits-edu.build.board=ESP32_PICO
kits-edu.build.f_cpu=240000000L
kits-edu.build.flash_size=4MB
kits-edu.build.flash_freq=80m
kits-edu.build.flash_mode=dio
kits-edu.build.boot=dio
kits-edu.build.partitions=default
kits-edu.build.defines=
kits-edu.menu.PartitionScheme.default=Default
kits-edu.menu.PartitionScheme.default.build.partitions=default
kits-edu.menu.PartitionScheme.no_ota=No OTA (Large APP)
kits-edu.menu.PartitionScheme.no_ota.build.partitions=no_ota
kits-edu.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
kits-edu.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
kits-edu.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
kits-edu.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
kits-edu.menu.UploadSpeed.921600=921600
kits-edu.menu.UploadSpeed.921600.upload.speed=921600
kits-edu.menu.UploadSpeed.115200=115200
kits-edu.menu.UploadSpeed.115200.upload.speed=115200
kits-edu.menu.UploadSpeed.256000.windows=256000
kits-edu.menu.UploadSpeed.256000.upload.speed=256000
kits-edu.menu.UploadSpeed.230400.windows.upload.speed=256000
kits-edu.menu.UploadSpeed.230400=230400
kits-edu.menu.UploadSpeed.230400.upload.speed=230400
kits-edu.menu.UploadSpeed.460800.linux=460800
kits-edu.menu.UploadSpeed.460800.macosx=460800
kits-edu.menu.UploadSpeed.460800.upload.speed=460800
kits-edu.menu.UploadSpeed.512000.windows=512000
kits-edu.menu.UploadSpeed.512000.upload.speed=512000
kits-edu.menu.DebugLevel.none=None
kits-edu.menu.DebugLevel.none.build.code_debug=0
kits-edu.menu.DebugLevel.error=Error
kits-edu.menu.DebugLevel.error.build.code_debug=1
kits-edu.menu.DebugLevel.warn=Warn
kits-edu.menu.DebugLevel.warn.build.code_debug=2
kits-edu.menu.DebugLevel.info=Info
kits-edu.menu.DebugLevel.info.build.code_debug=3
kits-edu.menu.DebugLevel.debug=Debug
kits-edu.menu.DebugLevel.debug.build.code_debug=4
kits-edu.menu.DebugLevel.verbose=Verbose
kits-edu.menu.DebugLevel.verbose.build.code_debug=5
Add Senses's WEIZEN board from Senses IoT platform (#3687) * Add Senses's WEIZEN board from Senses IoT platform * Add Senses's WEIZEN board (updated variant)
2020-01-29 16:08:14 +01:00
##############################################################
add new board Handbit (#3807) * add handbit * add handbit pins_arduino * Update boards.txt
2020-03-12 09:16:50 +01:00
add new board mpython (#3814)
2020-09-30 13:49:57 +02:00
mPython.name=Labplus mPython
add new board Handbit (#3807) * add handbit * add handbit pins_arduino * Update boards.txt
2020-03-12 09:16:50 +01:00
mPython.upload.tool=esptool_py
mPython.upload.maximum_size=1310720
mPython.upload.maximum_data_size=327680
mPython.upload.wait_for_upload_port=true
mPython.serial.disableDTR=true
mPython.serial.disableRTS=true
mPython.build.mcu=esp32
mPython.build.core=esp32
mPython.build.variant=mpython
mPython.build.board=ESP32_DEV
mPython.build.f_cpu=240000000L
mPython.build.flash_size=8MB
mPython.build.flash_freq=40m
mPython.build.flash_mode=dio
mPython.build.boot=dio
mPython.build.partitions=huge_app
mPython.build.defines=
mPython.menu.PSRAM.disabled=Disabled
mPython.menu.PSRAM.disabled.build.defines=
mPython.menu.PSRAM.enabled=Enabled
mPython.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
mPython.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
mPython.menu.PartitionScheme.huge_app.build.partitions=huge_app
mPython.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
mPython.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
mPython.menu.PartitionScheme.default.build.partitions=default
mPython.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
mPython.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
mPython.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
mPython.menu.PartitionScheme.minimal.build.partitions=minimal
mPython.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
mPython.menu.PartitionScheme.no_ota.build.partitions=no_ota
mPython.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
mPython.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
mPython.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
mPython.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
mPython.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
mPython.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
mPython.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
mPython.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
mPython.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
mPython.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
mPython.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
mPython.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
mPython.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
mPython.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
mPython.menu.PartitionScheme.fatflash.build.partitions=ffat
mPython.menu.CPUFreq.240=240MHz (WiFi/BT)
mPython.menu.CPUFreq.240.build.f_cpu=240000000L
mPython.menu.FlashMode.qio=QIO
mPython.menu.FlashMode.qio.build.flash_mode=dio
mPython.menu.FlashMode.qio.build.boot=qio
mPython.menu.FlashMode.dio=DIO
mPython.menu.FlashMode.dio.build.flash_mode=dio
mPython.menu.FlashMode.dio.build.boot=dio
mPython.menu.FlashMode.qout=QOUT
mPython.menu.FlashMode.qout.build.flash_mode=dout
mPython.menu.FlashMode.qout.build.boot=qout
mPython.menu.FlashMode.dout=DOUT
mPython.menu.FlashMode.dout.build.flash_mode=dout
mPython.menu.FlashMode.dout.build.boot=dout
mPython.menu.FlashFreq.80=80MHz
mPython.menu.FlashFreq.80.build.flash_freq=80m
mPython.menu.FlashFreq.40=40MHz
mPython.menu.FlashFreq.40.build.flash_freq=40m
mPython.menu.FlashSize.8M=8MB (64Mb)
mPython.menu.FlashSize.8M.build.flash_size=8MB
mPython.menu.UploadSpeed.921600=921600
mPython.menu.UploadSpeed.921600.upload.speed=921600
mPython.menu.UploadSpeed.115200=115200
mPython.menu.UploadSpeed.115200.upload.speed=115200
mPython.menu.UploadSpeed.256000.windows=256000
mPython.menu.UploadSpeed.256000.upload.speed=256000
mPython.menu.UploadSpeed.230400.windows.upload.speed=256000
mPython.menu.UploadSpeed.230400=230400
mPython.menu.UploadSpeed.230400.upload.speed=230400
mPython.menu.UploadSpeed.460800.linux=460800
mPython.menu.UploadSpeed.460800.macosx=460800
mPython.menu.UploadSpeed.460800.upload.speed=460800
mPython.menu.UploadSpeed.512000.windows=512000
mPython.menu.UploadSpeed.512000.upload.speed=512000
mPython.menu.DebugLevel.none=None
mPython.menu.DebugLevel.none.build.code_debug=0
mPython.menu.DebugLevel.error=Error
mPython.menu.DebugLevel.error.build.code_debug=1
mPython.menu.DebugLevel.warn=Warn
mPython.menu.DebugLevel.warn.build.code_debug=2
mPython.menu.DebugLevel.info=Info
mPython.menu.DebugLevel.info.build.code_debug=3
mPython.menu.DebugLevel.debug=Debug
mPython.menu.DebugLevel.debug.build.code_debug=4
mPython.menu.DebugLevel.verbose=Verbose
mPython.menu.DebugLevel.verbose.build.code_debug=5
added new board Logsens V1p1 (#3880) * Added new board variant for Imbrios LogSens V1.1 Imbrios LogSens V1.1 new board variant * added new board Imbrios LogSens V1.1 Added new board details: Imbrios LogSens V1.1
2020-09-30 14:01:51 +02:00
##############################################################
imbrios-logsens-v1p1.name=IMBRIOS LOGSENS_V1P1
imbrios-logsens-v1p1.upload.tool=esptool_py
imbrios-logsens-v1p1.upload.maximum_size=1310720
imbrios-logsens-v1p1.upload.maximum_data_size=327680
imbrios-logsens-v1p1.upload.wait_for_upload_port=true
imbrios-logsens-v1p1.serial.disableDTR=true
imbrios-logsens-v1p1.serial.disableRTS=true
imbrios-logsens-v1p1.build.mcu=esp32
imbrios-logsens-v1p1.build.core=esp32
imbrios-logsens-v1p1.build.variant=imbrios-logsens-v1p1
imbrios-logsens-v1p1.build.board=IMBRIOS_LOGSENS_V1P1
imbrios-logsens-v1p1.build.f_cpu=240000000L
imbrios-logsens-v1p1.build.flash_mode=dio
imbrios-logsens-v1p1.build.flash_size=4MB
imbrios-logsens-v1p1.build.boot=dio
imbrios-logsens-v1p1.build.partitions=default
imbrios-logsens-v1p1.build.defines=
imbrios-logsens-v1p1.menu.FlashFreq.80=80MHz
imbrios-logsens-v1p1.menu.FlashFreq.80.build.flash_freq=80m
imbrios-logsens-v1p1.menu.FlashFreq.40=40MHz
imbrios-logsens-v1p1.menu.FlashFreq.40.build.flash_freq=40m
imbrios-logsens-v1p1.menu.PartitionScheme.default=Default
imbrios-logsens-v1p1.menu.PartitionScheme.default.build.partitions=default
imbrios-logsens-v1p1.menu.PartitionScheme.no_ota=No OTA (Large APP)
imbrios-logsens-v1p1.menu.PartitionScheme.no_ota.build.partitions=no_ota
imbrios-logsens-v1p1.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
imbrios-logsens-v1p1.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
imbrios-logsens-v1p1.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
imbrios-logsens-v1p1.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
imbrios-logsens-v1p1.menu.CPUFreq.240=240MHz (WiFi/BT)
imbrios-logsens-v1p1.menu.CPUFreq.240.build.f_cpu=240000000L
imbrios-logsens-v1p1.menu.CPUFreq.160=160MHz (WiFi/BT)
imbrios-logsens-v1p1.menu.CPUFreq.160.build.f_cpu=160000000L
imbrios-logsens-v1p1.menu.CPUFreq.80=80MHz (WiFi/BT)
imbrios-logsens-v1p1.menu.CPUFreq.80.build.f_cpu=80000000L
imbrios-logsens-v1p1.menu.CPUFreq.40=40MHz (40MHz XTAL)
imbrios-logsens-v1p1.menu.CPUFreq.40.build.f_cpu=40000000L
imbrios-logsens-v1p1.menu.CPUFreq.26=26MHz (26MHz XTAL)
imbrios-logsens-v1p1.menu.CPUFreq.26.build.f_cpu=26000000L
imbrios-logsens-v1p1.menu.CPUFreq.20=20MHz (40MHz XTAL)
imbrios-logsens-v1p1.menu.CPUFreq.20.build.f_cpu=20000000L
imbrios-logsens-v1p1.menu.CPUFreq.13=13MHz (26MHz XTAL)
imbrios-logsens-v1p1.menu.CPUFreq.13.build.f_cpu=13000000L
imbrios-logsens-v1p1.menu.CPUFreq.10=10MHz (40MHz XTAL)
imbrios-logsens-v1p1.menu.CPUFreq.10.build.f_cpu=10000000L
imbrios-logsens-v1p1.menu.UploadSpeed.921600=921600
imbrios-logsens-v1p1.menu.UploadSpeed.921600.upload.speed=921600
imbrios-logsens-v1p1.menu.UploadSpeed.115200=115200
imbrios-logsens-v1p1.menu.UploadSpeed.115200.upload.speed=115200
imbrios-logsens-v1p1.menu.UploadSpeed.256000.windows=256000
imbrios-logsens-v1p1.menu.UploadSpeed.256000.upload.speed=256000
imbrios-logsens-v1p1.menu.UploadSpeed.230400.windows.upload.speed=256000
imbrios-logsens-v1p1.menu.UploadSpeed.230400=230400
imbrios-logsens-v1p1.menu.UploadSpeed.230400.upload.speed=230400
imbrios-logsens-v1p1.menu.UploadSpeed.460800.linux=460800
imbrios-logsens-v1p1.menu.UploadSpeed.460800.macosx=460800
imbrios-logsens-v1p1.menu.UploadSpeed.460800.upload.speed=460800
imbrios-logsens-v1p1.menu.UploadSpeed.512000.windows=512000
imbrios-logsens-v1p1.menu.UploadSpeed.512000.upload.speed=512000
add new board Handbit (#3807) * add handbit * add handbit pins_arduino * Update boards.txt
2020-03-12 09:16:50 +01:00
##############################################################
Added HealthyPi 4 Board Support (#3985) Co-authored-by: Ashwin <ashwin@circuitects.com>
2020-09-30 14:14:39 +02:00
##############################################################
healthypi4.name=ProtoCentral HealthyPi 4
healthypi4.upload.tool=esptool_py
healthypi4.upload.maximum_size=1310720
healthypi4.upload.maximum_data_size=327680
healthypi4.upload.wait_for_upload_port=true
healthypi4.serial.disableDTR=true
healthypi4.serial.disableRTS=true
healthypi4.build.mcu=esp32
healthypi4.build.core=esp32
healthypi4.build.variant=healthypi4
healthypi4.build.board=HEALTHYPI_4
healthypi4.build.f_cpu=240000000L
healthypi4.build.flash_mode=dio
healthypi4.build.flash_size=4MB
healthypi4.build.boot=dio
healthypi4.build.partitions=min_spiffs
healthypi4.build.defines=
healthypi4.menu.FlashFreq.80=80MHz
healthypi4.menu.FlashFreq.80.build.flash_freq=80m
healthypi4.menu.FlashFreq.40=40MHz
healthypi4.menu.FlashFreq.40.build.flash_freq=40m
healthypi4.menu.PartitionScheme.default=Default
healthypi4.menu.PartitionScheme.default.build.partitions=default
healthypi4.menu.PartitionScheme.no_ota=No OTA (Large APP)
healthypi4.menu.PartitionScheme.no_ota.build.partitions=no_ota
healthypi4.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
healthypi4.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
healthypi4.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
healthypi4.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
healthypi4.menu.UploadSpeed.921600=921600
healthypi4.menu.UploadSpeed.921600.upload.speed=921600
healthypi4.menu.UploadSpeed.115200=115200
healthypi4.menu.UploadSpeed.115200.upload.speed=115200
healthypi4.menu.UploadSpeed.256000.windows=256000
healthypi4.menu.UploadSpeed.256000.upload.speed=256000
healthypi4.menu.UploadSpeed.230400.windows.upload.speed=256000
healthypi4.menu.UploadSpeed.230400=230400
healthypi4.menu.UploadSpeed.230400.upload.speed=230400
healthypi4.menu.UploadSpeed.460800.linux=460800
healthypi4.menu.UploadSpeed.460800.macosx=460800
healthypi4.menu.UploadSpeed.460800.upload.speed=460800
healthypi4.menu.UploadSpeed.512000.windows=512000
healthypi4.menu.UploadSpeed.512000.upload.speed=512000
healthypi4.menu.DebugLevel.none=None
healthypi4.menu.DebugLevel.none.build.code_debug=0
healthypi4.menu.DebugLevel.error=Error
healthypi4.menu.DebugLevel.error.build.code_debug=1
healthypi4.menu.DebugLevel.warn=Warn
healthypi4.menu.DebugLevel.warn.build.code_debug=2
healthypi4.menu.DebugLevel.info=Info
healthypi4.menu.DebugLevel.info.build.code_debug=3
healthypi4.menu.DebugLevel.debug=Debug
healthypi4.menu.DebugLevel.debug.build.code_debug=4
healthypi4.menu.DebugLevel.verbose=Verbose
healthypi4.menu.DebugLevel.verbose.build.code_debug=5
Reference in New Issue Copy Permalink